linux/include/net/inet_hashtables.h

480 lines
15 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Authors: Lotsa people, from code originally in tcp
*/
#ifndef _INET_HASHTABLES_H
#define _INET_HASHTABLES_H
#include <linux/interrupt.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/list.h>
#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <net/inet_connection_sock.h>
#include <net/inet_sock.h>
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
#include <net/ip.h>
#include <net/sock.h>
#include <net/route.h>
#include <net/tcp_states.h>
#include <net/netns/hash.h>
#include <linux/refcount.h>
#include <asm/byteorder.h>
/* This is for all connections with a full identity, no wildcards.
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 15:22:02 +08:00
* The 'e' prefix stands for Establish, but we really put all sockets
* but LISTEN ones.
*/
struct inet_ehash_bucket {
struct hlist_nulls_head chain;
};
/* There are a few simple rules, which allow for local port reuse by
* an application. In essence:
*
* 1) Sockets bound to different interfaces may share a local port.
* Failing that, goto test 2.
* 2) If all sockets have sk->sk_reuse set, and none of them are in
* TCP_LISTEN state, the port may be shared.
* Failing that, goto test 3.
* 3) If all sockets are bound to a specific inet_sk(sk)->rcv_saddr local
* address, and none of them are the same, the port may be
* shared.
* Failing this, the port cannot be shared.
*
* The interesting point, is test #2. This is what an FTP server does
* all day. To optimize this case we use a specific flag bit defined
* below. As we add sockets to a bind bucket list, we perform a
* check of: (newsk->sk_reuse && (newsk->sk_state != TCP_LISTEN))
* As long as all sockets added to a bind bucket pass this test,
* the flag bit will be set.
* The resulting situation is that tcp_v[46]_verify_bind() can just check
* for this flag bit, if it is set and the socket trying to bind has
* sk->sk_reuse set, we don't even have to walk the owners list at all,
* we return that it is ok to bind this socket to the requested local port.
*
* Sounds like a lot of work, but it is worth it. In a more naive
* implementation (ie. current FreeBSD etc.) the entire list of ports
* must be walked for each data port opened by an ftp server. Needless
* to say, this does not scale at all. With a couple thousand FTP
* users logged onto your box, isn't it nice to know that new data
* ports are created in O(1) time? I thought so. ;-) -DaveM
*/
#define FASTREUSEPORT_ANY 1
#define FASTREUSEPORT_STRICT 2
struct inet_bind_bucket {
possible_net_t ib_net;
int l3mdev;
unsigned short port;
signed char fastreuse;
signed char fastreuseport;
kuid_t fastuid;
#if IS_ENABLED(CONFIG_IPV6)
struct in6_addr fast_v6_rcv_saddr;
#endif
__be32 fast_rcv_saddr;
unsigned short fast_sk_family;
bool fast_ipv6_only;
struct hlist_node node;
struct hlist_head owners;
};
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
struct inet_bind2_bucket {
possible_net_t ib_net;
int l3mdev;
unsigned short port;
#if IS_ENABLED(CONFIG_IPV6)
unsigned short family;
#endif
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
union {
#if IS_ENABLED(CONFIG_IPV6)
struct in6_addr v6_rcv_saddr;
#endif
__be32 rcv_saddr;
};
/* Node in the bhash2 inet_bind_hashbucket chain */
struct hlist_node node;
/* List of sockets hashed to this bucket */
struct hlist_head owners;
/* bhash has twsk in owners, but bhash2 has twsk in
* deathrow not to add a member in struct sock_common.
*/
struct hlist_head deathrow;
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
};
static inline struct net *ib_net(const struct inet_bind_bucket *ib)
{
return read_pnet(&ib->ib_net);
}
static inline struct net *ib2_net(const struct inet_bind2_bucket *ib)
{
return read_pnet(&ib->ib_net);
}
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
#define inet_bind_bucket_for_each(tb, head) \
hlist_for_each_entry(tb, head, node)
struct inet_bind_hashbucket {
spinlock_t lock;
struct hlist_head chain;
};
/* Sockets can be hashed in established or listening table.
* We must use different 'nulls' end-of-chain value for all hash buckets :
* A socket might transition from ESTABLISH to LISTEN state without
* RCU grace period. A lookup in ehash table needs to handle this case.
*/
#define LISTENING_NULLS_BASE (1U << 29)
struct inet_listen_hashbucket {
spinlock_t lock;
net: inet: Retire port only listening_hash The listen sk is currently stored in two hash tables, listening_hash (hashed by port) and lhash2 (hashed by port and address). After commit 0ee58dad5b06 ("net: tcp6: prefer listeners bound to an address") and commit d9fbc7f6431f ("net: tcp: prefer listeners bound to an address"), the TCP-SYN lookup fast path does not use listening_hash. The commit 05c0b35709c5 ("tcp: seq_file: Replace listening_hash with lhash2") also moved the seq_file (/proc/net/tcp) iteration usage from listening_hash to lhash2. There are still a few listening_hash usages left. One of them is inet_reuseport_add_sock() which uses the listening_hash to search a listen sk during the listen() system call. This turns out to be very slow on use cases that listen on many different VIPs at a popular port (e.g. 443). [ On top of the slowness in adding to the tail in the IPv6 case ]. The latter patch has a selftest to demonstrate this case. This patch takes this chance to move all remaining listening_hash usages to lhash2 and then retire listening_hash. Since most changes need to be done together, it is hard to cut the listening_hash to lhash2 switch into small patches. The changes in this patch is highlighted here for the review purpose. 1. Because of the listening_hash removal, lhash2 can use the sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node. This will also keep the sk_unhashed() check to work as is after stop adding sk to listening_hash. The union is removed from inet_listen_hashbucket because only nulls_head is needed. 2. icsk->icsk_listen_portaddr_node and its helpers are removed. 3. The current lhash2 users needs to iterate with sk_nulls_node instead of icsk_listen_portaddr_node. One case is in the inet[6]_lhash2_lookup(). Another case is the seq_file iterator in tcp_ipv4.c. One thing to note is sk_nulls_next() is needed because the old inet_lhash2_for_each_icsk_continue() does a "next" first before iterating. 4. Move the remaining listening_hash usage to lhash2 inet_reuseport_add_sock() which this series is trying to improve. inet_diag.c and mptcp_diag.c are the final two remaining use cases and is moved to lhash2 now also. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12 08:06:05 +08:00
struct hlist_nulls_head nulls_head;
};
/* This is for listening sockets, thus all sockets which possess wildcards. */
#define INET_LHTABLE_SIZE 32 /* Yes, really, this is all you need. */
struct inet_hashinfo {
/* This is for sockets with full identity only. Sockets here will
* always be without wildcards and will have the following invariant:
*
* TCP_ESTABLISHED <= sk->sk_state < TCP_CLOSE
*
*/
struct inet_ehash_bucket *ehash;
spinlock_t *ehash_locks;
unsigned int ehash_mask;
unsigned int ehash_locks_mask;
/* Ok, let's try this, I give up, we do need a local binding
* TCP hash as well as the others for fast bind/connect.
*/
struct kmem_cache *bind_bucket_cachep;
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
/* This bind table is hashed by local port */
struct inet_bind_hashbucket *bhash;
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
struct kmem_cache *bind2_bucket_cachep;
/* This bind table is hashed by local port and sk->sk_rcv_saddr (ipv4)
* or sk->sk_v6_rcv_saddr (ipv6). This 2nd bind table is used
* primarily for expediting bind conflict resolution.
*/
struct inet_bind_hashbucket *bhash2;
unsigned int bhash_size;
/* The 2nd listener table hashed by local port and address */
unsigned int lhash2_mask;
struct inet_listen_hashbucket *lhash2;
tcp: Introduce optional per-netns ehash. The more sockets we have in the hash table, the longer we spend looking up the socket. While running a number of small workloads on the same host, they penalise each other and cause performance degradation. The root cause might be a single workload that consumes much more resources than the others. It often happens on a cloud service where different workloads share the same computing resource. On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash entries), after running iperf3 in different netns, creating 24Mi sockets without data transfer in the root netns causes about 10% performance regression for the iperf3's connection. thash_entries sockets length Gbps 524288 1 1 50.7 24Mi 48 45.1 It is basically related to the length of the list of each hash bucket. For testing purposes to see how performance drops along the length, I set 131072 (1Mi / 8) to thash_entries, and here's the result. thash_entries sockets length Gbps 131072 1 1 50.7 1Mi 8 49.9 2Mi 16 48.9 4Mi 32 47.3 8Mi 64 44.6 16Mi 128 40.6 24Mi 192 36.3 32Mi 256 32.5 40Mi 320 27.0 48Mi 384 25.0 To resolve the socket lookup degradation, we introduce an optional per-netns hash table for TCP, but it's just ehash, and we still share the global bhash, bhash2 and lhash2. With a smaller ehash, we can look up non-listener sockets faster and isolate such noisy neighbours. In addition, we can reduce lock contention. We can control the ehash size by a new sysctl knob. However, depending on workloads, it will require very sensitive tuning, so we disable the feature by default (net.ipv4.tcp_child_ehash_entries == 0). Moreover, we can fall back to using the global ehash in case we fail to allocate enough memory for a new ehash. The maximum size is 16Mi, which is large enough that even if we have 48Mi sockets, the average list length is 3, and regression would be less than 1%. We can check the current ehash size by another read-only sysctl knob, net.ipv4.tcp_ehash_entries. A negative value means the netns shares the global ehash (per-netns ehash is disabled or failed to allocate memory). # dmesg | cut -d ' ' -f 5- | grep "established hash" TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage) # sysctl net.ipv4.tcp_ehash_entries net.ipv4.tcp_ehash_entries = 524288 # can be changed by thash_entries # sysctl net.ipv4.tcp_child_ehash_entries net.ipv4.tcp_child_ehash_entries = 0 # disabled by default # ip netns add test1 # ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries net.ipv4.tcp_ehash_entries = -524288 # share the global ehash # sysctl -w net.ipv4.tcp_child_ehash_entries=100 net.ipv4.tcp_child_ehash_entries = 100 # ip netns add test2 # ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries net.ipv4.tcp_ehash_entries = 128 # own a per-netns ehash with 2^n buckets When more than two processes in the same netns create per-netns ehash concurrently with different sizes, we need to guarantee the size in one of the following ways: 1) Share the global ehash and create per-netns ehash First, unshare() with tcp_child_ehash_entries==0. It creates dedicated netns sysctl knobs where we can safely change tcp_child_ehash_entries and clone()/unshare() to create a per-netns ehash. 2) Control write on sysctl by BPF We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on sysctl knobs. Note that the global ehash allocated at the boot time is spread over available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate pages for each per-netns ehash depending on the current process's NUMA policy. By default, the allocation is done in the local node only, so the per-netns hash table could fully reside on a random node. Thus, depending on the NUMA policy the netns is created with and the CPU the current thread is running on, we could see some performance differences for highly optimised networking applications. Note also that the default values of two sysctl knobs depend on the ehash size and should be tuned carefully: tcp_max_tw_buckets : tcp_child_ehash_entries / 2 tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128) As a bonus, we can dismantle netns faster. Currently, while destroying netns, we call inet_twsk_purge(), which walks through the global ehash. It can be potentially big because it can have many sockets other than TIME_WAIT in all netns. Splitting ehash changes that situation, where it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets in each netns. With regard to this, we do not free the per-netns ehash in inet_twsk_kill() to avoid UAF while iterating the per-netns ehash in inet_twsk_purge(). Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to keep it protocol-family-independent. In the future, we could optimise ehash lookup/iteration further by removing netns comparison for the per-netns ehash. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-08 09:10:22 +08:00
bool pernet;
};
static inline struct inet_hashinfo *tcp_or_dccp_get_hashinfo(const struct sock *sk)
{
#if IS_ENABLED(CONFIG_IP_DCCP)
return sk->sk_prot->h.hashinfo ? :
sock_net(sk)->ipv4.tcp_death_row.hashinfo;
#else
return sock_net(sk)->ipv4.tcp_death_row.hashinfo;
#endif
}
static inline struct inet_listen_hashbucket *
inet_lhash2_bucket(struct inet_hashinfo *h, u32 hash)
{
return &h->lhash2[hash & h->lhash2_mask];
}
[INET]: speedup inet (tcp/dccp) lookups Arnaldo and I agreed it could be applied now, because I have other pending patches depending on this one (Thank you Arnaldo) (The other important patch moves skc_refcnt in a separate cache line, so that the SMP/NUMA performance doesnt suffer from cache line ping pongs) 1) First some performance data : -------------------------------- tcp_v4_rcv() wastes a *lot* of time in __inet_lookup_established() The most time critical code is : sk_for_each(sk, node, &head->chain) { if (INET_MATCH(sk, acookie, saddr, daddr, ports, dif)) goto hit; /* You sunk my battleship! */ } The sk_for_each() does use prefetch() hints but only the begining of "struct sock" is prefetched. As INET_MATCH first comparison uses inet_sk(__sk)->daddr, wich is far away from the begining of "struct sock", it has to bring into CPU cache cold cache line. Each iteration has to use at least 2 cache lines. This can be problematic if some chains are very long. 2) The goal ----------- The idea I had is to change things so that INET_MATCH() may return FALSE in 99% of cases only using the data already in the CPU cache, using one cache line per iteration. 3) Description of the patch --------------------------- Adds a new 'unsigned int skc_hash' field in 'struct sock_common', filling a 32 bits hole on 64 bits platform. struct sock_common { unsigned short skc_family; volatile unsigned char skc_state; unsigned char skc_reuse; int skc_bound_dev_if; struct hlist_node skc_node; struct hlist_node skc_bind_node; atomic_t skc_refcnt; + unsigned int skc_hash; struct proto *skc_prot; }; Store in this 32 bits field the full hash, not masked by (ehash_size - 1) Using this full hash as the first comparison done in INET_MATCH permits us immediatly skip the element without touching a second cache line in case of a miss. Suppress the sk_hashent/tw_hashent fields since skc_hash (aliased to sk_hash and tw_hash) already contains the slot number if we mask with (ehash_size - 1) File include/net/inet_hashtables.h 64 bits platforms : #define INET_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) ((*((__u64 *)&(inet_sk(__sk)->daddr)))== (__cookie)) && \ ((*((__u32 *)&(inet_sk(__sk)->dport))) == (__ports)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) 32bits platforms: #define TCP_IPV4_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) && \ (inet_sk(__sk)->daddr == (__saddr)) && \ (inet_sk(__sk)->rcv_saddr == (__daddr)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) - Adds a prefetch(head->chain.first) in __inet_lookup_established()/__tcp_v4_check_established() and __inet6_lookup_established()/__tcp_v6_check_established() and __dccp_v4_check_established() to bring into cache the first element of the list, before the {read|write}_lock(&head->lock); Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 05:13:38 +08:00
static inline struct inet_ehash_bucket *inet_ehash_bucket(
struct inet_hashinfo *hashinfo,
unsigned int hash)
{
return &hashinfo->ehash[hash & hashinfo->ehash_mask];
}
static inline spinlock_t *inet_ehash_lockp(
struct inet_hashinfo *hashinfo,
unsigned int hash)
{
return &hashinfo->ehash_locks[hash & hashinfo->ehash_locks_mask];
}
int inet_ehash_locks_alloc(struct inet_hashinfo *hashinfo);
static inline void inet_hashinfo2_free_mod(struct inet_hashinfo *h)
{
kfree(h->lhash2);
h->lhash2 = NULL;
}
static inline void inet_ehash_locks_free(struct inet_hashinfo *hashinfo)
{
kvfree(hashinfo->ehash_locks);
hashinfo->ehash_locks = NULL;
}
tcp: Introduce optional per-netns ehash. The more sockets we have in the hash table, the longer we spend looking up the socket. While running a number of small workloads on the same host, they penalise each other and cause performance degradation. The root cause might be a single workload that consumes much more resources than the others. It often happens on a cloud service where different workloads share the same computing resource. On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash entries), after running iperf3 in different netns, creating 24Mi sockets without data transfer in the root netns causes about 10% performance regression for the iperf3's connection. thash_entries sockets length Gbps 524288 1 1 50.7 24Mi 48 45.1 It is basically related to the length of the list of each hash bucket. For testing purposes to see how performance drops along the length, I set 131072 (1Mi / 8) to thash_entries, and here's the result. thash_entries sockets length Gbps 131072 1 1 50.7 1Mi 8 49.9 2Mi 16 48.9 4Mi 32 47.3 8Mi 64 44.6 16Mi 128 40.6 24Mi 192 36.3 32Mi 256 32.5 40Mi 320 27.0 48Mi 384 25.0 To resolve the socket lookup degradation, we introduce an optional per-netns hash table for TCP, but it's just ehash, and we still share the global bhash, bhash2 and lhash2. With a smaller ehash, we can look up non-listener sockets faster and isolate such noisy neighbours. In addition, we can reduce lock contention. We can control the ehash size by a new sysctl knob. However, depending on workloads, it will require very sensitive tuning, so we disable the feature by default (net.ipv4.tcp_child_ehash_entries == 0). Moreover, we can fall back to using the global ehash in case we fail to allocate enough memory for a new ehash. The maximum size is 16Mi, which is large enough that even if we have 48Mi sockets, the average list length is 3, and regression would be less than 1%. We can check the current ehash size by another read-only sysctl knob, net.ipv4.tcp_ehash_entries. A negative value means the netns shares the global ehash (per-netns ehash is disabled or failed to allocate memory). # dmesg | cut -d ' ' -f 5- | grep "established hash" TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage) # sysctl net.ipv4.tcp_ehash_entries net.ipv4.tcp_ehash_entries = 524288 # can be changed by thash_entries # sysctl net.ipv4.tcp_child_ehash_entries net.ipv4.tcp_child_ehash_entries = 0 # disabled by default # ip netns add test1 # ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries net.ipv4.tcp_ehash_entries = -524288 # share the global ehash # sysctl -w net.ipv4.tcp_child_ehash_entries=100 net.ipv4.tcp_child_ehash_entries = 100 # ip netns add test2 # ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries net.ipv4.tcp_ehash_entries = 128 # own a per-netns ehash with 2^n buckets When more than two processes in the same netns create per-netns ehash concurrently with different sizes, we need to guarantee the size in one of the following ways: 1) Share the global ehash and create per-netns ehash First, unshare() with tcp_child_ehash_entries==0. It creates dedicated netns sysctl knobs where we can safely change tcp_child_ehash_entries and clone()/unshare() to create a per-netns ehash. 2) Control write on sysctl by BPF We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on sysctl knobs. Note that the global ehash allocated at the boot time is spread over available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate pages for each per-netns ehash depending on the current process's NUMA policy. By default, the allocation is done in the local node only, so the per-netns hash table could fully reside on a random node. Thus, depending on the NUMA policy the netns is created with and the CPU the current thread is running on, we could see some performance differences for highly optimised networking applications. Note also that the default values of two sysctl knobs depend on the ehash size and should be tuned carefully: tcp_max_tw_buckets : tcp_child_ehash_entries / 2 tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128) As a bonus, we can dismantle netns faster. Currently, while destroying netns, we call inet_twsk_purge(), which walks through the global ehash. It can be potentially big because it can have many sockets other than TIME_WAIT in all netns. Splitting ehash changes that situation, where it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets in each netns. With regard to this, we do not free the per-netns ehash in inet_twsk_kill() to avoid UAF while iterating the per-netns ehash in inet_twsk_purge(). Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to keep it protocol-family-independent. In the future, we could optimise ehash lookup/iteration further by removing netns comparison for the per-netns ehash. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-08 09:10:22 +08:00
struct inet_hashinfo *inet_pernet_hashinfo_alloc(struct inet_hashinfo *hashinfo,
unsigned int ehash_entries);
void inet_pernet_hashinfo_free(struct inet_hashinfo *hashinfo);
struct inet_bind_bucket *
inet_bind_bucket_create(struct kmem_cache *cachep, struct net *net,
struct inet_bind_hashbucket *head,
const unsigned short snum, int l3mdev);
void inet_bind_bucket_destroy(struct kmem_cache *cachep,
struct inet_bind_bucket *tb);
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
bool inet_bind_bucket_match(const struct inet_bind_bucket *tb,
const struct net *net, unsigned short port,
int l3mdev);
struct inet_bind2_bucket *
inet_bind2_bucket_create(struct kmem_cache *cachep, struct net *net,
struct inet_bind_hashbucket *head,
unsigned short port, int l3mdev,
const struct sock *sk);
void inet_bind2_bucket_destroy(struct kmem_cache *cachep,
struct inet_bind2_bucket *tb);
struct inet_bind2_bucket *
inet_bind2_bucket_find(const struct inet_bind_hashbucket *head,
const struct net *net,
unsigned short port, int l3mdev,
const struct sock *sk);
bool inet_bind2_bucket_match_addr_any(const struct inet_bind2_bucket *tb,
const struct net *net, unsigned short port,
int l3mdev, const struct sock *sk);
static inline u32 inet_bhashfn(const struct net *net, const __u16 lport,
const u32 bhash_size)
{
return (lport + net_hash_mix(net)) & (bhash_size - 1);
}
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
static inline struct inet_bind_hashbucket *
inet_bhashfn_portaddr(const struct inet_hashinfo *hinfo, const struct sock *sk,
const struct net *net, unsigned short port)
{
u32 hash;
#if IS_ENABLED(CONFIG_IPV6)
if (sk->sk_family == AF_INET6)
hash = ipv6_portaddr_hash(net, &sk->sk_v6_rcv_saddr, port);
else
#endif
hash = ipv4_portaddr_hash(net, sk->sk_rcv_saddr, port);
return &hinfo->bhash2[hash & (hinfo->bhash_size - 1)];
}
struct inet_bind_hashbucket *
inet_bhash2_addr_any_hashbucket(const struct sock *sk, const struct net *net, int port);
/* This should be called whenever a socket's sk_rcv_saddr (ipv4) or
* sk_v6_rcv_saddr (ipv6) changes after it has been binded. The socket's
* rcv_saddr field should already have been updated when this is called.
*/
int inet_bhash2_update_saddr(struct sock *sk, void *saddr, int family);
dccp/tcp: Fixup bhash2 bucket when connect() fails. If a socket bound to a wildcard address fails to connect(), we only reset saddr and keep the port. Then, we have to fix up the bhash2 bucket; otherwise, the bucket has an inconsistent address in the list. Also, listen() for such a socket will fire the WARN_ON() in inet_csk_get_port(). [0] Note that when a system runs out of memory, we give up fixing the bucket and unlink sk from bhash and bhash2 by inet_put_port(). [0]: WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Modules linked in: CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202 RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000 RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280 FS: 00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205) inet_listen (net/ipv4/af_inet.c:228) __sys_listen (net/socket.c:1810) __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f8ac051de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007 R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388 R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000 </TASK> Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19 09:49:14 +08:00
void inet_bhash2_reset_saddr(struct sock *sk);
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
net: Add a bhash2 table hashed by port and address The current bind hashtable (bhash) is hashed by port only. In the socket bind path, we have to check for bind conflicts by traversing the specified port's inet_bind_bucket while holding the hashbucket's spinlock (see inet_csk_get_port() and inet_csk_bind_conflict()). In instances where there are tons of sockets hashed to the same port at different addresses, the bind conflict check is time-intensive and can cause softirq cpu lockups, as well as stops new tcp connections since __inet_inherit_port() also contests for the spinlock. This patch adds a second bind table, bhash2, that hashes by port and sk->sk_rcv_saddr (ipv4) and sk->sk_v6_rcv_saddr (ipv6). Searching the bhash2 table leads to significantly faster conflict resolution and less time holding the hashbucket spinlock. Please note a few things: * There can be the case where the a socket's address changes after it has been bound. There are two cases where this happens: 1) The case where there is a bind() call on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6) and then a connect() call. The kernel will assign the socket an address when it handles the connect() 2) In inet_sk_reselect_saddr(), which is called when rebuilding the sk header and a few pre-conditions are met (eg rerouting fails). In these two cases, we need to update the bhash2 table by removing the entry for the old address, and add a new entry reflecting the updated address. * The bhash2 table must have its own lock, even though concurrent accesses on the same port are protected by the bhash lock. Bhash2 must have its own lock to protect against cases where sockets on different ports hash to different bhash hashbuckets but to the same bhash2 hashbucket. This brings up a few stipulations: 1) When acquiring both the bhash and the bhash2 lock, the bhash2 lock will always be acquired after the bhash lock and released before the bhash lock is released. 2) There are no nested bhash2 hashbucket locks. A bhash2 lock is always acquired+released before another bhash2 lock is acquired+released. * The bhash table cannot be superseded by the bhash2 table because for bind requests on INADDR_ANY (ipv4) or IPV6_ADDR_ANY (ipv6), every socket bound to that port must be checked for a potential conflict. The bhash table is the only source of port->socket associations. Signed-off-by: Joanne Koong <joannelkoong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23 02:10:21 +08:00
struct inet_bind2_bucket *tb2, unsigned short port);
/* Caller must disable local BH processing. */
int __inet_inherit_port(const struct sock *sk, struct sock *child);
void inet_put_port(struct sock *sk);
void inet_hashinfo2_init(struct inet_hashinfo *h, const char *name,
unsigned long numentries, int scale,
unsigned long low_limit,
unsigned long high_limit);
int inet_hashinfo2_init_mod(struct inet_hashinfo *h);
tcp: fix race condition when creating child sockets from syncookies When the TCP stack is in SYN flood mode, the server child socket is created from the SYN cookie received in a TCP packet with the ACK flag set. The child socket is created when the server receives the first TCP packet with a valid SYN cookie from the client. Usually, this packet corresponds to the final step of the TCP 3-way handshake, the ACK packet. But is also possible to receive a valid SYN cookie from the first TCP data packet sent by the client, and thus create a child socket from that SYN cookie. Since a client socket is ready to send data as soon as it receives the SYN+ACK packet from the server, the client can send the ACK packet (sent by the TCP stack code), and the first data packet (sent by the userspace program) almost at the same time, and thus the server will equally receive the two TCP packets with valid SYN cookies almost at the same instant. When such event happens, the TCP stack code has a race condition that occurs between the momement a lookup is done to the established connections hashtable to check for the existence of a connection for the same client, and the moment that the child socket is added to the established connections hashtable. As a consequence, this race condition can lead to a situation where we add two child sockets to the established connections hashtable and deliver two sockets to the userspace program to the same client. This patch fixes the race condition by checking if an existing child socket exists for the same client when we are adding the second child socket to the established connections socket. If an existing child socket exists, we drop the packet and discard the second child socket to the same client. Signed-off-by: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20 19:11:33 +08:00
bool inet_ehash_insert(struct sock *sk, struct sock *osk, bool *found_dup_sk);
bool inet_ehash_nolisten(struct sock *sk, struct sock *osk,
bool *found_dup_sk);
int __inet_hash(struct sock *sk, struct sock *osk);
int inet_hash(struct sock *sk);
void inet_unhash(struct sock *sk);
struct sock *__inet_lookup_listener(struct net *net,
struct inet_hashinfo *hashinfo,
struct sk_buff *skb, int doff,
const __be32 saddr, const __be16 sport,
const __be32 daddr,
const unsigned short hnum,
const int dif, const int sdif);
static inline struct sock *inet_lookup_listener(struct net *net,
struct inet_hashinfo *hashinfo,
struct sk_buff *skb, int doff,
__be32 saddr, __be16 sport,
__be32 daddr, __be16 dport, int dif, int sdif)
{
return __inet_lookup_listener(net, hashinfo, skb, doff, saddr, sport,
daddr, ntohs(dport), dif, sdif);
}
/* Socket demux engine toys. */
/* What happens here is ugly; there's a pair of adjacent fields in
struct inet_sock; __be16 dport followed by __u16 num. We want to
search by pair, so we combine the keys into a single 32bit value
and compare with 32bit value read from &...->dport. Let's at least
make sure that it's not mixed with anything else...
On 64bit targets we combine comparisons with pair of adjacent __be32
fields in the same way.
*/
#ifdef __BIG_ENDIAN
#define INET_COMBINED_PORTS(__sport, __dport) \
((__force __portpair)(((__force __u32)(__be16)(__sport) << 16) | (__u32)(__dport)))
#else /* __LITTLE_ENDIAN */
#define INET_COMBINED_PORTS(__sport, __dport) \
((__force __portpair)(((__u32)(__dport) << 16) | (__force __u32)(__be16)(__sport)))
#endif
#ifdef __BIG_ENDIAN
#define INET_ADDR_COOKIE(__name, __saddr, __daddr) \
const __addrpair __name = (__force __addrpair) ( \
(((__force __u64)(__be32)(__saddr)) << 32) | \
((__force __u64)(__be32)(__daddr)))
#else /* __LITTLE_ENDIAN */
#define INET_ADDR_COOKIE(__name, __saddr, __daddr) \
const __addrpair __name = (__force __addrpair) ( \
(((__force __u64)(__be32)(__daddr)) << 32) | \
((__force __u64)(__be32)(__saddr)))
#endif /* __BIG_ENDIAN */
static inline bool inet_match(struct net *net, const struct sock *sk,
const __addrpair cookie, const __portpair ports,
int dif, int sdif)
{
if (!net_eq(sock_net(sk), net) ||
sk->sk_portpair != ports ||
sk->sk_addrpair != cookie)
return false;
/* READ_ONCE() paired with WRITE_ONCE() in sock_bindtoindex_locked() */
return inet_sk_bound_dev_eq(net, READ_ONCE(sk->sk_bound_dev_if), dif,
sdif);
}
/* Sockets in TCP_CLOSE state are _always_ taken out of the hash, so we need
* not check it for lookups anymore, thanks Alexey. -DaveM
*/
struct sock *__inet_lookup_established(struct net *net,
struct inet_hashinfo *hashinfo,
const __be32 saddr, const __be16 sport,
const __be32 daddr, const u16 hnum,
const int dif, const int sdif);
static inline struct sock *
inet_lookup_established(struct net *net, struct inet_hashinfo *hashinfo,
const __be32 saddr, const __be16 sport,
const __be32 daddr, const __be16 dport,
const int dif)
{
return __inet_lookup_established(net, hashinfo, saddr, sport, daddr,
ntohs(dport), dif, 0);
}
static inline struct sock *__inet_lookup(struct net *net,
struct inet_hashinfo *hashinfo,
struct sk_buff *skb, int doff,
const __be32 saddr, const __be16 sport,
const __be32 daddr, const __be16 dport,
const int dif, const int sdif,
bool *refcounted)
{
u16 hnum = ntohs(dport);
struct sock *sk;
sk = __inet_lookup_established(net, hashinfo, saddr, sport,
daddr, hnum, dif, sdif);
*refcounted = true;
if (sk)
return sk;
*refcounted = false;
return __inet_lookup_listener(net, hashinfo, skb, doff, saddr,
sport, daddr, hnum, dif, sdif);
}
static inline struct sock *inet_lookup(struct net *net,
struct inet_hashinfo *hashinfo,
struct sk_buff *skb, int doff,
const __be32 saddr, const __be16 sport,
const __be32 daddr, const __be16 dport,
const int dif)
{
struct sock *sk;
bool refcounted;
sk = __inet_lookup(net, hashinfo, skb, doff, saddr, sport, daddr,
dport, dif, 0, &refcounted);
if (sk && !refcounted && !refcount_inc_not_zero(&sk->sk_refcnt))
sk = NULL;
return sk;
}
static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo,
struct sk_buff *skb,
int doff,
const __be16 sport,
const __be16 dport,
const int sdif,
bool *refcounted)
{
struct sock *sk = skb_steal_sock(skb, refcounted);
const struct iphdr *iph = ip_hdr(skb);
if (sk)
return sk;
return __inet_lookup(dev_net(skb_dst(skb)->dev), hashinfo, skb,
doff, iph->saddr, sport,
iph->daddr, dport, inet_iif(skb), sdif,
refcounted);
}
u32 inet6_ehashfn(const struct net *net,
const struct in6_addr *laddr, const u16 lport,
const struct in6_addr *faddr, const __be16 fport);
static inline void sk_daddr_set(struct sock *sk, __be32 addr)
{
sk->sk_daddr = addr; /* alias of inet_daddr */
#if IS_ENABLED(CONFIG_IPV6)
ipv6_addr_set_v4mapped(addr, &sk->sk_v6_daddr);
#endif
}
static inline void sk_rcv_saddr_set(struct sock *sk, __be32 addr)
{
sk->sk_rcv_saddr = addr; /* alias of inet_rcv_saddr */
#if IS_ENABLED(CONFIG_IPV6)
ipv6_addr_set_v4mapped(addr, &sk->sk_v6_rcv_saddr);
#endif
}
int __inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk, u64 port_offset,
int (*check_established)(struct inet_timewait_death_row *,
struct sock *, __u16,
struct inet_timewait_sock **));
int inet_hash_connect(struct inet_timewait_death_row *death_row,
struct sock *sk);
#endif /* _INET_HASHTABLES_H */