korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-20 10:44:23 +08:00
Code Issues Packages Projects Releases Wiki Activity
58b5f2cc4b
linux/arch/x86/kernel/uprobes.c

997 lines
32 KiB
C
Raw Normal View History

uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
* User-space Probes (UProbes) for x86
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2008-2011
* Authors:
* Srikar Dronamraju
* Jim Keniston
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/uprobes.h>
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
#include <linux/uaccess.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
#include <linux/kdebug.h>
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
#include <asm/processor.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
#include <asm/insn.h>
x86: Make is_64bit_mm() widely available The uprobes code has a nice helper, is_64bit_mm(), that consults both the runtime and compile-time flags for 32-bit support. Instead of reinventing the wheel, pull it in to an x86 header so we can use it for MPX. I prefer passing the 'mm' around to test_thread_flag(TIF_IA32) because it makes it explicit where the context is coming from. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave@sr71.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20150607183704.F0209999@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-08 02:37:04 +08:00
#include <asm/mmu_context.h>
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* Post-execution fixups. */
/* Adjust IP back to vicinity of actual insn */
uprobes/x86: Cleanup the usage of arch_uprobe->def.fixups, make it u8 handle_riprel_insn() assumes that nobody else could modify ->fixups before. This is correct but fragile, change it to use "|=". Also make ->fixups u8, we are going to add the new members into the union. It is not clear why UPROBE_FIX_RIP_.X lived in the upper byte, redefine them so that they can fit into u8. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 00:52:37 +08:00
#define UPROBE_FIX_IP 0x01
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* Adjust the return address of a call insn */
uprobes/x86: Cleanup the usage of arch_uprobe->def.fixups, make it u8 handle_riprel_insn() assumes that nobody else could modify ->fixups before. This is correct but fragile, change it to use "|=". Also make ->fixups u8, we are going to add the new members into the union. It is not clear why UPROBE_FIX_RIP_.X lived in the upper byte, redefine them so that they can fit into u8. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 00:52:37 +08:00
#define UPROBE_FIX_CALL 0x02
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobes/x86: Implement x86 specific arch_uprobe_*_step The arch specific implementation behaves like user_enable_single_step() except that it does not disable single stepping if it was already enabled by ptrace. This allows the debugger to single step over an uprobe. The state of block stepping is not restored. It makes only sense together with TF and if that was enabled then the debugger is notified. Note: this is still not correct. For example, TIF_SINGLESTEP check is not right, the application itself can set X86_EFLAGS_TF. And otoh we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf". See the next patches, we need the changes in arch/x86/kernel/step.c first. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-08-20 18:47:34 +08:00
/* Instruction will modify TF, don't change it */
uprobes/x86: Cleanup the usage of arch_uprobe->def.fixups, make it u8 handle_riprel_insn() assumes that nobody else could modify ->fixups before. This is correct but fragile, change it to use "|=". Also make ->fixups u8, we are going to add the new members into the union. It is not clear why UPROBE_FIX_RIP_.X lived in the upper byte, redefine them so that they can fit into u8. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 00:52:37 +08:00
#define UPROBE_FIX_SETF 0x04
uprobes/x86: Implement x86 specific arch_uprobe_*_step The arch specific implementation behaves like user_enable_single_step() except that it does not disable single stepping if it was already enabled by ptrace. This allows the debugger to single step over an uprobe. The state of block stepping is not restored. It makes only sense together with TF and if that was enabled then the debugger is notified. Note: this is still not correct. For example, TIF_SINGLESTEP check is not right, the application itself can set X86_EFLAGS_TF. And otoh we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf". See the next patches, we need the changes in arch/x86/kernel/step.c first. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-08-20 18:47:34 +08:00
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
#define UPROBE_FIX_RIP_SI 0x08
#define UPROBE_FIX_RIP_DI 0x10
#define UPROBE_FIX_RIP_BX 0x20
#define UPROBE_FIX_RIP_MASK \
(UPROBE_FIX_RIP_SI | UPROBE_FIX_RIP_DI | UPROBE_FIX_RIP_BX)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
#define UPROBE_TRAP_NR UINT_MAX
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* Adaptations for mhiramat x86 decoder v14. */
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
#define OPCODE1(insn) ((insn)->opcode.bytes[0])
#define OPCODE2(insn) ((insn)->opcode.bytes[1])
#define OPCODE3(insn) ((insn)->opcode.bytes[2])
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
#define MODRM_REG(insn) X86_MODRM_REG((insn)->modrm.value)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
#define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \
(b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) | \
(b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) | \
(bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf)) \
<< (row % 32))
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
/*
* Good-instruction tables for 32-bit apps. This is non-const and volatile
* to keep gcc from statically optimizing it out, as variable_test_bit makes
* some versions of gcc to think only *(unsigned long*) is used.
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
*
* Opcodes we'll probably never support:
* 6c-6f - ins,outs. SEGVs if used in userspace
* e4-e7 - in,out imm. SEGVs if used in userspace
* ec-ef - in,out acc. SEGVs if used in userspace
* cc - int3. SIGTRAP if used in userspace
* ce - into. Not used in userspace - no kernel support to make it useful. SEGVs
* (why we support bound (62) then? it's similar, and similarly unused...)
* f1 - int1. SIGTRAP if used in userspace
* f4 - hlt. SEGVs if used in userspace
* fa - cli. SEGVs if used in userspace
* fb - sti. SEGVs if used in userspace
*
* Opcodes which need some work to be supported:
* 07,17,1f - pop es/ss/ds
* Normally not used in userspace, but would execute if used.
* Can cause GP or stack exception if tries to load wrong segment descriptor.
* We hesitate to run them under single step since kernel's handling
* of userspace single-stepping (TF flag) is fragile.
* We can easily refuse to support push es/cs/ss/ds (06/0e/16/1e)
* on the same grounds that they are never used.
* cd - int N.
* Used by userspace for "int 80" syscall entry. (Other "int N"
* cause GP -> SEGV since their IDT gates don't allow calls from CPL 3).
* Not supported since kernel's handling of userspace single-stepping
* (TF flag) is fragile.
* cf - iret. Normally not used in userspace. Doesn't SEGV unless arguments are bad
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
*/
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
static volatile u32 good_insns_32[256 / 32] = {
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
/* ---------------------------------------------- */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x00, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 00 */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
W(0x10, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 10 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 20 */
W(0x30, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 30 */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0xd0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0xf0, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/* ---------------------------------------------- */
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
};
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
#else
#define good_insns_32 NULL
#endif
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
/* Good-instruction tables for 64-bit apps.
*
* Genuinely invalid opcodes:
* 06,07 - formerly push/pop es
* 0e - formerly push cs
* 16,17 - formerly push/pop ss
* 1e,1f - formerly push/pop ds
* 27,2f,37,3f - formerly daa/das/aaa/aas
* 60,61 - formerly pusha/popa
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
* 62 - formerly bound. EVEX prefix for AVX512 (not yet supported)
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
* 82 - formerly redundant encoding of Group1
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
* 9a - formerly call seg:ofs
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
* ce - formerly into
* d4,d5 - formerly aam/aad
* d6 - formerly undocumented salc
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
* ea - formerly jmp seg:ofs
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
*
* Opcodes we'll probably never support:
* 6c-6f - ins,outs. SEGVs if used in userspace
* e4-e7 - in,out imm. SEGVs if used in userspace
* ec-ef - in,out acc. SEGVs if used in userspace
* cc - int3. SIGTRAP if used in userspace
* f1 - int1. SIGTRAP if used in userspace
* f4 - hlt. SEGVs if used in userspace
* fa - cli. SEGVs if used in userspace
* fb - sti. SEGVs if used in userspace
*
* Opcodes which need some work to be supported:
* cd - int N.
* Used by userspace for "int 80" syscall entry. (Other "int N"
* cause GP -> SEGV since their IDT gates don't allow calls from CPL 3).
* Not supported since kernel's handling of userspace single-stepping
* (TF flag) is fragile.
* cf - iret. Normally not used in userspace. Doesn't SEGV unless arguments are bad
*/
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
#if defined(CONFIG_X86_64)
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
static volatile u32 good_insns_64[256 / 32] = {
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
/* ---------------------------------------------- */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x00, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1) | /* 00 */
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
W(0x10, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 10 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x20, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) | /* 20 */
W(0x30, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 30 */
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x60, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
W(0x80, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1) , /* 90 */
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
W(0xd0, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
uprobes/x86: Fix 1-byte opcode tables This change fixes 1-byte opcode tables so that only insns for which we have real reasons to disallow probing are marked with unset bits. To that end: Set bits for all prefix bytes. Their setting is ignored anyway - we check the bitmap against OPCODE1(insn), not against first byte. Keeping them set to 0 only confuses code reader with "why we don't support that opcode" question. Thus: enable bytes c4,c5 in 64-bit mode (VEX prefixes). Byte 62 (EVEX prefix) is not yet enabled since insn decoder does not support that yet. For 32-bit mode, enable probing of opcodes 63 (arpl) and d6 (salc). They don't require any special handling. For 64-bit mode, disable 9a and ea - these undefined opcodes were mistakenly left enabled. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-2-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:51 +08:00
W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 0, 1, 0, 0, 0, 0) | /* e0 */
W(0xf0, 1, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1) /* f0 */
uprobes/core: Make instruction tables volatile Some versions of gcc spits a warning about the asm operand for test_bit and also causes the first long of the instruction table to be output. Fix is similar to 7115e3fc on arch/x86/kernel/kprobes.c Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091535.15880.12502.sendpatchset@srdronam.in.ibm.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:15:35 +08:00
/* ---------------------------------------------- */
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
};
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
#else
#define good_insns_64 NULL
#endif
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
/* Using this for both 64-bit and 32-bit apps.
* Opcodes we don't support:
* 0f 00 - SLDT/STR/LLDT/LTR/VERR/VERW/-/- group. System insns
* 0f 01 - SGDT/SIDT/LGDT/LIDT/SMSW/-/LMSW/INVLPG group.
* Also encodes tons of other system insns if mod=11.
* Some are in fact non-system: xend, xtest, rdtscp, maybe more
* 0f 05 - syscall
* 0f 06 - clts (CPL0 insn)
* 0f 07 - sysret
* 0f 08 - invd (CPL0 insn)
* 0f 09 - wbinvd (CPL0 insn)
* 0f 0b - ud2
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
* 0f 30 - wrmsr (CPL0 insn) (then why rdmsr is allowed, it's also CPL0 insn?)
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
* 0f 34 - sysenter
* 0f 35 - sysexit
* 0f 37 - getsec
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
* 0f 78 - vmread (Intel VMX. CPL0 insn)
* 0f 79 - vmwrite (Intel VMX. CPL0 insn)
* Note: with prefixes, these two opcodes are
* extrq/insertq/AVX512 convert vector ops.
* 0f ae - group15: [f]xsave,[f]xrstor,[v]{ld,st}mxcsr,clflush[opt],
* {rd,wr}{fs,gs}base,{s,l,m}fence.
* Why? They are all user-executable.
uprobes/x86: Add comment with insn opcodes, mnemonics and why we dont support them After adding these, it's clear we have some awkward choices there. Some valid instructions are prohibited from uprobing while several invalid ones are allowed. Hopefully future edits to the good-opcode tables will fix wrong bits or explain why those bits are not wrong. No actual code changes. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-1-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:50 +08:00
*/
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
static volatile u32 good_2byte_insns[256 / 32] = {
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
/* ---------------------------------------------- */
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
W(0x00, 0, 0, 1, 1, 1, 0, 0, 0, 0, 0, 1, 0, 1, 1, 1, 1) | /* 00 */
W(0x10, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 10 */
W(0x20, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 20 */
W(0x30, 0, 1, 1, 1, 0, 0, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1) , /* 30 */
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 60 */
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1) , /* 70 */
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1) | /* a0 */
W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
W(0xd0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
W(0xe0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* e0 */
uprobes/x86: Fix 2-byte opcode table Enabled probing of lar, lsl, popcnt, lddqu, prefetch insns. They should be safe to probe, they throw no exceptions. Enabled probing of 3-byte opcodes 0f 38-3f xx - these are vector isns, so should be safe. Enabled probing of many currently undefined 0f xx insns. At the rate new vector instructions are getting added, we don't want to constantly enable more bits. We want to only occasionally *disable* ones which for some reason can't be probed. This includes 0f 24,26 opcodes, which are undefined since Pentium. On 486, they were "mov to/from test register". Explained more fully what 0f 78,79 opcodes are. Explained what 0f ae opcode is. (It's unclear why we don't allow probing it, but let's not change it for now). Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1423768732-32194-3-git-send-email-dvlasenk@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-13 03:18:52 +08:00
W(0xf0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) /* f0 */
uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Add the suitable ifdef's around good_insns_* arrays. We do not want to add the ugly ifdef's into their only user, uprobe_init_insn(), so the "#else" branch simply defines them as NULL. This doesn't generate the extra code, gcc is smart enough, although the code is fine even if it could not detect that (without CONFIG_IA32_EMULATION) is_64bit_mm() is __builtin_constant_p(). The patch looks more complicated because it also moves good_insns_64 up close to good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 22:07:15 +08:00
/* ---------------------------------------------- */
/* 0 1 2 3 4 5 6 7 8 9 a b c d e f */
};
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
#undef W
/*
* opcodes we may need to refine support for:
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
*
* 0f - 2-byte instructions: For many of these instructions, the validity
* depends on the prefix and/or the reg field. On such instructions, we
* just consider the opcode combination valid if it corresponds to any
* valid instruction.
*
* 8f - Group 1 - only reg = 0 is OK
* c6-c7 - Group 11 - only reg = 0 is OK
* d9-df - fpu insns with some illegal encodings
* f2, f3 - repnz, repz prefixes. These are also the first byte for
* certain floating-point instructions, such as addsd.
*
* fe - Group 4 - only reg = 0 or 1 is OK
* ff - Group 5 - only reg = 0-6 is OK
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* others -- Do we need to support these?
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
*
* 0f - (floating-point?) prefetch instructions
* 07, 17, 1f - pop es, pop ss, pop ds
* 26, 2e, 36, 3e - es:, cs:, ss:, ds: segment prefixes --
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* but 64 and 65 (fs: and gs:) seem to be used, so we support them
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
* 67 - addr16 prefix
* ce - into
* f0 - lock prefix
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
/*
* TODO:
* - Where necessary, examine the modrm byte and allow only valid instructions
* in the different Groups and fpu instructions.
*/
static bool is_prefix_bad(struct insn *insn)
{
int i;
for (i = 0; i < insn->prefixes.nbytes; i++) {
switch (insn->prefixes.bytes[i]) {
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
case 0x26: /* INAT_PFX_ES */
case 0x2E: /* INAT_PFX_CS */
case 0x36: /* INAT_PFX_DS */
case 0x3E: /* INAT_PFX_SS */
case 0xF0: /* INAT_PFX_LOCK */
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return true;
}
}
return false;
}
uprobes/x86: Add uprobe_init_insn(), kill validate_insn_{32,64}bits() validate_insn_32bits() and validate_insn_64bits() are very similar, turn them into the single uprobe_init_insn() which has the additional "bool x86_64" argument which can be passed to insn_init() and used to choose between good_insns_64/good_insns_32. Also kill UPROBE_FIX_NONE, it has no users. Note: the current code doesn't use ifdef's consistently, good_insns_64 depends on CONFIG_X86_64 but good_insns_32 is unconditional. This patch removes ifdef around good_insns_64, we will add it back later along with the similar one for good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 18:34:02 +08:00
static int uprobe_init_insn(struct arch_uprobe *auprobe, struct insn *insn, bool x86_64)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
uprobes/x86: Add uprobe_init_insn(), kill validate_insn_{32,64}bits() validate_insn_32bits() and validate_insn_64bits() are very similar, turn them into the single uprobe_init_insn() which has the additional "bool x86_64" argument which can be passed to insn_init() and used to choose between good_insns_64/good_insns_32. Also kill UPROBE_FIX_NONE, it has no users. Note: the current code doesn't use ifdef's consistently, good_insns_64 depends on CONFIG_X86_64 but good_insns_32 is unconditional. This patch removes ifdef around good_insns_64, we will add it back later along with the similar one for good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 18:34:02 +08:00
u32 volatile *good_insns;
x86: Remove arbitrary instruction size limit in instruction decoder The current x86 instruction decoder steps along through the instruction stream but always ensures that it never steps farther than the largest possible instruction size (MAX_INSN_SIZE). The MPX code is now going to be doing some decoding of userspace instructions. We copy those from userspace in to the kernel and they're obviously completely untrusted coming from userspace. In addition to the constraint that instructions can only be so long, we also have to be aware of how long the buffer is that came in from userspace. This _looks_ to be similar to what the perf and kprobes is doing, but it's unclear to me whether they are affected. The whole reason we need this is that it is perfectly valid to be executing an instruction within MAX_INSN_SIZE bytes of an unreadable page. We should be able to gracefully handle short reads in those cases. This adds support to the decoder to record how long the buffer being decoded is and to refuse to "validate" the instruction if we would have gone over the end of the buffer to decode it. The kprobes code probably needs to be looked at here a bit more carefully. This patch still respects the MAX_INSN_SIZE limit there but the kprobes code does look like it might be able to be a bit more strict than it currently is. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: x86@kernel.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20141114153957.E6B01535@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-14 23:39:57 +08:00
insn_init(insn, auprobe->insn, sizeof(auprobe->insn), x86_64);
uprobes/x86: Shift "insn_complete" from branch_setup_xol_ops() to uprobe_init_insn() Change uprobe_init_insn() to make insn_complete() == T, this makes other insn_get_*() calls unnecessary. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 20:15:27 +08:00
/* has the side-effect of processing the entire instruction */
insn_get_length(insn);
if (WARN_ON_ONCE(!insn_complete(insn)))
return -ENOEXEC;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (is_prefix_bad(insn))
return -ENOTSUPP;
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
uprobes/x86: Add uprobe_init_insn(), kill validate_insn_{32,64}bits() validate_insn_32bits() and validate_insn_64bits() are very similar, turn them into the single uprobe_init_insn() which has the additional "bool x86_64" argument which can be passed to insn_init() and used to choose between good_insns_64/good_insns_32. Also kill UPROBE_FIX_NONE, it has no users. Note: the current code doesn't use ifdef's consistently, good_insns_64 depends on CONFIG_X86_64 but good_insns_32 is unconditional. This patch removes ifdef around good_insns_64, we will add it back later along with the similar one for good_insns_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 18:34:02 +08:00
if (x86_64)
good_insns = good_insns_64;
else
good_insns = good_insns_32;
if (test_bit(OPCODE1(insn), (unsigned long *)good_insns))
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return 0;
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (insn->opcode.nbytes == 2) {
if (test_bit(OPCODE2(insn), (unsigned long *)good_2byte_insns))
return 0;
}
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return -ENOTSUPP;
}
#ifdef CONFIG_X86_64
/*
uprobes/core: Move insn to arch specific structure Few cleanups suggested by Ingo Molnar. - Rename struct uprobe_arch_info to struct arch_uprobe. - Move insn from struct uprobe to struct arch_uprobe. - Make arch specific uprobe functions to accept struct arch_uprobe instead of struct uprobe. - Move struct uprobe to kernel/uprobes.c from include/linux/uprobes.h Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091602.15880.40249.sendpatchset@srdronam.in.ibm.com [ Made various small improvements ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:16:02 +08:00
* If arch_uprobe->insn doesn't use rip-relative addressing, return
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* immediately. Otherwise, rewrite the instruction so that it accesses
* its memory operand indirectly through a scratch register. Set
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
* defparam->fixups accordingly. (The contents of the scratch register
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
* will be saved before we single-step the modified instruction,
* and restored afterward).
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*
* We do this because a rip-relative instruction can access only a
* relatively small area (+/- 2 GB from the instruction), and the XOL
* area typically lies beyond that area. At least for instructions
* that store to memory, we can't execute the original instruction
* and "fix things up" later, because the misdirected store could be
* disastrous.
*
* Some useful facts about rip-relative instructions:
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
*
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
* - There's always a modrm byte with bit layout "00 reg 101".
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
* - There's never a SIB byte.
* - The displacement is always 4 bytes.
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
* - REX.B=1 bit in REX prefix, which normally extends r/m field,
* has no effect on rip-relative mode. It doesn't make modrm byte
* with r/m=101 refer to register 1101 = R13.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
uprobes/x86: Rename *riprel* helpers to make the naming consistent handle_riprel_insn(), pre_xol_rip_insn() and handle_riprel_post_xol() look confusing and inconsistent. Rename them into riprel_analyze(), riprel_pre_xol(), and riprel_post_xol() respectively. No changes in compiled code. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-27 22:31:59 +08:00
static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
u8 *cursor;
u8 reg;
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
u8 reg2;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
if (!insn_rip_relative(insn))
return;
/*
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
* insn_rip_relative() would have decoded rex_prefix, vex_prefix, modrm.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* Clear REX.b bit (extension of MODRM.rm field):
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
* we want to encode low numbered reg, not r8+.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
if (insn->rex_prefix.nbytes) {
uprobes/core: Move insn to arch specific structure Few cleanups suggested by Ingo Molnar. - Rename struct uprobe_arch_info to struct arch_uprobe. - Move insn from struct uprobe to struct arch_uprobe. - Make arch specific uprobe functions to accept struct arch_uprobe instead of struct uprobe. - Move struct uprobe to kernel/uprobes.c from include/linux/uprobes.h Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091602.15880.40249.sendpatchset@srdronam.in.ibm.com [ Made various small improvements ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:16:02 +08:00
cursor = auprobe->insn + insn_offset_rex_prefix(insn);
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
/* REX byte has 0100wrxb layout, clearing REX.b bit */
*cursor &= 0xfe;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
/*
* Similar treatment for VEX3 prefix.
* TODO: add XOP/EVEX treatment when insn decoder supports them
*/
if (insn->vex_prefix.nbytes == 3) {
/*
* vex2: c5 rvvvvLpp (has no b bit)
* vex3/xop: c4/8f rxbmmmmm wvvvvLpp
* evex: 62 rxbR00mm wvvvv1pp zllBVaaa
* (evex will need setting of both b and x since
* in non-sib encoding evex.x is 4th bit of MODRM.rm)
* Setting VEX3.b (setting because it has inverted meaning):
*/
cursor = auprobe->insn + insn_offset_vex_prefix(insn) + 1;
*cursor |= 0x20;
}
/*
* Convert from rip-relative addressing to register-relative addressing
* via a scratch register.
*
* This is tricky since there are insns with modrm byte
* which also use registers not encoded in modrm byte:
* [i]div/[i]mul: implicitly use dx:ax
* shift ops: implicitly use cx
* cmpxchg: implicitly uses ax
* cmpxchg8/16b: implicitly uses dx:ax and bx:cx
* Encoding: 0f c7/1 modrm
* The code below thinks that reg=1 (cx), chooses si as scratch.
* mulx: implicitly uses dx: mulx r/m,r1,r2 does r1:r2 = dx * r/m.
* First appeared in Haswell (BMI2 insn). It is vex-encoded.
* Example where none of bx,cx,dx can be used as scratch reg:
* c4 e2 63 f6 0d disp32 mulx disp32(%rip),%ebx,%ecx
* [v]pcmpistri: implicitly uses cx, xmm0
* [v]pcmpistrm: implicitly uses xmm0
* [v]pcmpestri: implicitly uses ax, dx, cx, xmm0
* [v]pcmpestrm: implicitly uses ax, dx, xmm0
* Evil SSE4.2 string comparison ops from hell.
* maskmovq/[v]maskmovdqu: implicitly uses (ds:rdi) as destination.
* Encoding: 0f f7 modrm, 66 0f f7 modrm, vex-encoded: c5 f9 f7 modrm.
* Store op1, byte-masked by op2 msb's in each byte, to (ds:rdi).
* AMD says it has no 3-operand form (vex.vvvv must be 1111)
* and that it can have only register operands, not mem
* (its modrm byte must have mode=11).
* If these restrictions will ever be lifted,
* we'll need code to prevent selection of di as scratch reg!
*
* Summary: I don't know any insns with modrm byte which
* use SI register implicitly. DI register is used only
* by one insn (maskmovq) and BX register is used
* only by one too (cmpxchg8b).
* BP is stack-segment based (may be a problem?).
* AX, DX, CX are off-limits (many implicit users).
* SP is unusable (it's stack pointer - think about "pop mem";
* also, rsp+disp32 needs sib encoding -> insn length change).
*/
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
reg = MODRM_REG(insn); /* Fetch modrm.reg */
reg2 = 0xff; /* Fetch vex.vvvv */
if (insn->vex_prefix.nbytes == 2)
reg2 = insn->vex_prefix.bytes[1];
else if (insn->vex_prefix.nbytes == 3)
reg2 = insn->vex_prefix.bytes[2];
/*
* TODO: add XOP, EXEV vvvv reading.
*
* vex.vvvv field is in bits 6-3, bits are inverted.
* But in 32-bit mode, high-order bit may be ignored.
* Therefore, let's consider only 3 low-order bits.
*/
reg2 = ((reg2 >> 3) & 0x7) ^ 0x7;
/*
* Register numbering is ax,cx,dx,bx, sp,bp,si,di, r8..r15.
*
* Choose scratch reg. Order is important: must not select bx
* if we can use si (cmpxchg8b case!)
*/
if (reg != 6 && reg2 != 6) {
reg2 = 6;
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
auprobe->defparam.fixups |= UPROBE_FIX_RIP_SI;
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
} else if (reg != 7 && reg2 != 7) {
reg2 = 7;
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
auprobe->defparam.fixups |= UPROBE_FIX_RIP_DI;
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
/* TODO (paranoia): force maskmovq to not use di */
} else {
reg2 = 3;
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
auprobe->defparam.fixups |= UPROBE_FIX_RIP_BX;
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
* Point cursor at the modrm byte. The next 4 bytes are the
* displacement. Beyond the displacement, for some instructions,
* is the immediate operand.
*/
uprobes/core: Move insn to arch specific structure Few cleanups suggested by Ingo Molnar. - Rename struct uprobe_arch_info to struct arch_uprobe. - Move insn from struct uprobe to struct arch_uprobe. - Make arch specific uprobe functions to accept struct arch_uprobe instead of struct uprobe. - Move struct uprobe to kernel/uprobes.c from include/linux/uprobes.h Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091602.15880.40249.sendpatchset@srdronam.in.ibm.com [ Made various small improvements ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:16:02 +08:00
cursor = auprobe->insn + insn_offset_modrm(insn);
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/*
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
* Change modrm from "00 reg 101" to "10 reg reg2". Example:
* 89 05 disp32 mov %eax,disp32(%rip) becomes
* 89 86 disp32 mov %eax,disp32(%rsi)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
*/
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
*cursor = 0x80 | (reg << 3) | reg2;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
uprobes/x86: Simplify riprel_{pre,post}_xol() and make them similar Ignoring the "correction" logic riprel_pre_xol() and riprel_post_xol() are very similar but look quite differently. 1. Add the "UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX" check at the start of riprel_pre_xol(), like the same check in riprel_post_xol(). 2. Add the trivial scratch_reg() helper which returns the address of scratch register pre_xol/post_xol need to change. 3. Change these functions to use the new helper and avoid copy-and-paste under if/else branches. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-28 00:13:31 +08:00
static inline unsigned long *
scratch_reg(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
if (auprobe->defparam.fixups & UPROBE_FIX_RIP_SI)
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
return &regs->si;
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
if (auprobe->defparam.fixups & UPROBE_FIX_RIP_DI)
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
return &regs->di;
return &regs->bx;
uprobes/x86: Simplify riprel_{pre,post}_xol() and make them similar Ignoring the "correction" logic riprel_pre_xol() and riprel_post_xol() are very similar but look quite differently. 1. Add the "UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX" check at the start of riprel_pre_xol(), like the same check in riprel_post_xol(). 2. Add the trivial scratch_reg() helper which returns the address of scratch register pre_xol/post_xol need to change. 3. Change these functions to use the new helper and avoid copy-and-paste under if/else branches. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-28 00:13:31 +08:00
}
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
/*
* If we're emulating a rip-relative instruction, save the contents
* of the scratch register and store the target address in that register.
*/
uprobes/x86: Kill the "autask" arg of riprel_pre_xol() default_pre_xol_op() passes &current->utask->autask to riprel_pre_xol() and this is just ugly because it still needs to load current->utask to read ->vaddr. Remove this argument, change riprel_pre_xol() to use current->utask. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-27 23:00:46 +08:00
static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
{
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
if (auprobe->defparam.fixups & UPROBE_FIX_RIP_MASK) {
uprobes/x86: Simplify riprel_{pre,post}_xol() and make them similar Ignoring the "correction" logic riprel_pre_xol() and riprel_post_xol() are very similar but look quite differently. 1. Add the "UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX" check at the start of riprel_pre_xol(), like the same check in riprel_post_xol(). 2. Add the trivial scratch_reg() helper which returns the address of scratch register pre_xol/post_xol need to change. 3. Change these functions to use the new helper and avoid copy-and-paste under if/else branches. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-28 00:13:31 +08:00
struct uprobe_task *utask = current->utask;
unsigned long *sr = scratch_reg(auprobe, regs);
utask->autask.saved_scratch_register = *sr;
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
*sr = utask->vaddr + auprobe->defparam.ilen;
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
}
}
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
{
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
if (auprobe->defparam.fixups & UPROBE_FIX_RIP_MASK) {
uprobes/x86: Simplify riprel_{pre,post}_xol() and make them similar Ignoring the "correction" logic riprel_pre_xol() and riprel_post_xol() are very similar but look quite differently. 1. Add the "UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX" check at the start of riprel_pre_xol(), like the same check in riprel_post_xol(). 2. Add the trivial scratch_reg() helper which returns the address of scratch register pre_xol/post_xol need to change. 3. Change these functions to use the new helper and avoid copy-and-paste under if/else branches. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-28 00:13:31 +08:00
struct uprobe_task *utask = current->utask;
unsigned long *sr = scratch_reg(auprobe, regs);
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
uprobes/x86: Simplify riprel_{pre,post}_xol() and make them similar Ignoring the "correction" logic riprel_pre_xol() and riprel_post_xol() are very similar but look quite differently. 1. Add the "UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX" check at the start of riprel_pre_xol(), like the same check in riprel_post_xol(). 2. Add the trivial scratch_reg() helper which returns the address of scratch register pre_xol/post_xol need to change. 3. Change these functions to use the new helper and avoid copy-and-paste under if/else branches. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-28 00:13:31 +08:00
*sr = utask->autask.saved_scratch_register;
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
}
}
uprobes/x86: Add is_64bit_mm(), kill validate_insn_bits() 1. Extract the ->ia32_compat check from 64bit validate_insn_bits() into the new helper, is_64bit_mm(), it will have more users. TODO: this checks is actually wrong if mm owner is X32 task, we need another fix which changes set_personality_ia32(). TODO: even worse, the whole 64-or-32-bit logic is very broken and the fix is not simple, we need the nontrivial changes in the core uprobes code. 2. Kill validate_insn_bits() and change its single caller to use uprobe_init_insn(is_64bit_mm(mm). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 20:03:05 +08:00
#else /* 32-bit: */
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
/*
* No RIP-relative addressing on 32-bit
*/
uprobes/x86: Rename *riprel* helpers to make the naming consistent handle_riprel_insn(), pre_xol_rip_insn() and handle_riprel_post_xol() look confusing and inconsistent. Rename them into riprel_analyze(), riprel_pre_xol(), and riprel_post_xol() respectively. No changes in compiled code. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-27 22:31:59 +08:00
static void riprel_analyze(struct arch_uprobe *auprobe, struct insn *insn)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
}
uprobes/x86: Kill the "autask" arg of riprel_pre_xol() default_pre_xol_op() passes &current->utask->autask to riprel_pre_xol() and this is just ugly because it still needs to load current->utask to read ->vaddr. Remove this argument, change riprel_pre_xol() to use current->utask. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-27 23:00:46 +08:00
static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
{
}
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
uprobes/x86: Gather "riprel" functions together Cosmetic. Move pre_xol_rip_insn() and handle_riprel_post_xol() up to the closely related handle_riprel_insn(). This way it is simpler to read and understand this code, and this lessens the number of ifdef's. While at it, update the comment in handle_riprel_post_xol() as Jim suggested. TODO: rename them somehow to make the naming consistent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-01 00:35:09 +08:00
{
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
}
#endif /* CONFIG_X86_64 */
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
struct uprobe_xol_ops {
bool (*emulate)(struct arch_uprobe *, struct pt_regs *);
int (*pre_xol)(struct arch_uprobe *, struct pt_regs *);
int (*post_xol)(struct arch_uprobe *, struct pt_regs *);
uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if auprobe->ops != default_xol_ops. This is fine correctness wise, only default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and otherwise handle_riprel_post_xol() is nop. But this doesn't look clean and this doesn't allow us to move ->fixups into the union in arch_uprobe. Move this handle_riprel_post_xol() call into the new default_abort_op() hook and change arch_uprobe_abort_xol() accordingly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-21 22:58:17 +08:00
void (*abort)(struct arch_uprobe *, struct pt_regs *);
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
};
uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() 1. Add the trivial sizeof_long() helper and change other callers of is_ia32_task() to use it. TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). 2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr() and adjust_ret_addr() should be named "nleft". And in fact only the last copy_to_user() in arch_uretprobe_hijack_return_addr() actually needs to inspect the non-zero error code. TODO: adjust_ret_addr() should die. We can always calculate the value we need to write into *regs->sp, just UPROBE_FIX_CALL should record insn->length. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 23:16:10 +08:00
static inline int sizeof_long(void)
{
return is_ia32_task() ? 4 : 8;
}
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
static int default_pre_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
uprobes/x86: Kill the "autask" arg of riprel_pre_xol() default_pre_xol_op() passes &current->utask->autask to riprel_pre_xol() and this is just ugly because it still needs to load current->utask to read ->vaddr. Remove this argument, change riprel_pre_xol() to use current->utask. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-27 23:00:46 +08:00
riprel_pre_xol(auprobe, regs);
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
return 0;
}
uprobes/x86: Introduce push_ret_address() Extract the "push return address" code from branch_emulate_op() into the new simple helper, push_ret_address(). It will have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 01:21:38 +08:00
static int push_ret_address(struct pt_regs *regs, unsigned long ip)
{
unsigned long new_sp = regs->sp - sizeof_long();
if (copy_to_user((void __user *)new_sp, &ip, sizeof_long()))
return -EFAULT;
regs->sp = new_sp;
return 0;
}
uprobes/x86: Fix scratch register selection for rip-relative fixups Before this patch, instructions such as div, mul, shifts with count in CL, cmpxchg are mishandled. This patch adds vex prefix handling. In particular, it avoids colliding with register operand encoded in vex.vvvv field. Since we need to avoid two possible register operands, the selection of scratch register needs to be from at least three registers. After looking through a lot of CPU docs, it looks like the safest choice is SI,DI,BX. Selecting BX needs care to not collide with implicit use of BX by cmpxchg8b. Test-case: #include <stdio.h> static const char *const pass[] = { "FAIL", "pass" }; long two = 2; void test1(void) { long ax = 0, dx = 0; asm volatile("\n" " xor %%edx,%%edx\n" " lea 2(%%edx),%%eax\n" // We divide 2 by 2. Result (in eax) should be 1: " probe1: .globl probe1\n" " divl two(%%rip)\n" // If we have a bug (eax mangled on entry) the result will be 2, // because eax gets restored by probe machinery. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[ax == 1] ); } long val2 = 0; void test2(void) { long old_val = val2; long ax = 0, dx = 0; asm volatile("\n" " mov val2,%%eax\n" // eax := val2 " lea 1(%%eax),%%edx\n" // edx := eax+1 // eax is equal to val2. cmpxchg should store edx to val2: " probe2: .globl probe2\n" " cmpxchg %%edx,val2(%%rip)\n" // If we have a bug (eax mangled on entry), val2 will stay unchanged : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val2 == old_val + 1] ); } long val3[2] = {0,0}; void test3(void) { long old_val = val3[0]; long ax = 0, dx = 0; asm volatile("\n" " mov val3,%%eax\n" // edx:eax := val3 " mov val3+4,%%edx\n" " mov %%eax,%%ebx\n" // ecx:ebx := edx:eax + 1 " mov %%edx,%%ecx\n" " add $1,%%ebx\n" " adc $0,%%ecx\n" // edx:eax is equal to val3. cmpxchg8b should store ecx:ebx to val3: " probe3: .globl probe3\n" " cmpxchg8b val3(%%rip)\n" // If we have a bug (edx:eax mangled on entry), val3 will stay unchanged. // If ecx:edx in mangled, val3 will get wrong value. : "=a" (ax), "=d" (dx) /*out*/ : "0" (ax), "1" (dx) /*in*/ : "cx", "bx", "memory" /*clobber*/ ); dprintf(2, "%s: %s\n", __func__, pass[val3[0] == old_val + 1 && val3[1] == 0] ); } int main(int argc, char **argv) { test1(); test2(); test3(); return 0; } Before this change all tests fail if probe{1,2,3} are probed. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-02 23:04:00 +08:00
/*
* We have to fix things up as follows:
*
* Typically, the new ip is relative to the copied instruction. We need
* to make it relative to the original instruction (FIX_IP). Exceptions
* are return instructions and absolute or indirect jump or call instructions.
*
* If the single-stepped instruction was a call, the return address that
* is atop the stack is the address following the copied instruction. We
* need to make it the address following the original instruction (FIX_CALL).
*
* If the original instruction was a rip-relative instruction such as
* "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
* instruction using a scratch register -- e.g., "movl %edx,0xnnnn(%rsi)".
* We need to restore the contents of the scratch register
* (FIX_RIP_reg).
*/
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
riprel_post_xol(auprobe, regs);
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
if (auprobe->defparam.fixups & UPROBE_FIX_IP) {
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
long correction = utask->vaddr - utask->xol_vaddr;
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
regs->ip += correction;
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
} else if (auprobe->defparam.fixups & UPROBE_FIX_CALL) {
regs->sp += sizeof_long(); /* Pop incorrect return address */
if (push_ret_address(regs, utask->vaddr + auprobe->defparam.ilen))
uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible SIGILL after the failed arch_uprobe_post_xol() should only be used as a last resort, we should try to restart the probed insn if possible. Currently only adjust_ret_addr() can fail, and this can only happen if another thread unmapped our stack after we executed "call" out-of-line. Most probably the application if buggy, but even in this case it can have a handler for SIGSEGV/etc. And in theory it can be even correct and do something non-trivial with its memory. Of course we can't restart unconditionally, so arch_uprobe_post_xol() does this only if ->post_xol() returns -ERESTART even if currently this is the only possible error. default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim pointed out it should not forget to pop off the return address pushed by this insn executed out-of-line. Note: this is not "perfect", we do not want the extra handler_chain() after restart, but I think this is the best solution we can realistically do without too much uglifications. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:52:19 +08:00
return -ERESTART;
}
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
/* popf; tell the caller to not touch TF */
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
if (auprobe->defparam.fixups & UPROBE_FIX_SETF)
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
utask->autask.saved_tf = true;
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible SIGILL after the failed arch_uprobe_post_xol() should only be used as a last resort, we should try to restart the probed insn if possible. Currently only adjust_ret_addr() can fail, and this can only happen if another thread unmapped our stack after we executed "call" out-of-line. Most probably the application if buggy, but even in this case it can have a handler for SIGSEGV/etc. And in theory it can be even correct and do something non-trivial with its memory. Of course we can't restart unconditionally, so arch_uprobe_post_xol() does this only if ->post_xol() returns -ERESTART even if currently this is the only possible error. default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim pointed out it should not forget to pop off the return address pushed by this insn executed out-of-line. Note: this is not "perfect", we do not want the extra handler_chain() after restart, but I think this is the best solution we can realistically do without too much uglifications. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:52:19 +08:00
return 0;
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
}
uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if auprobe->ops != default_xol_ops. This is fine correctness wise, only default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and otherwise handle_riprel_post_xol() is nop. But this doesn't look clean and this doesn't allow us to move ->fixups into the union in arch_uprobe. Move this handle_riprel_post_xol() call into the new default_abort_op() hook and change arch_uprobe_abort_xol() accordingly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-21 22:58:17 +08:00
static void default_abort_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
uprobes/x86: Simplify rip-relative handling It is possible to replace rip-relative addressing mode with addressing mode of the same length: (reg+disp32). This eliminates the need to fix up immediate and correct for changing instruction length. And we can kill arch_uprobe->def.riprel_target. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-05-01 22:52:46 +08:00
riprel_post_xol(auprobe, regs);
uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if auprobe->ops != default_xol_ops. This is fine correctness wise, only default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and otherwise handle_riprel_post_xol() is nop. But this doesn't look clean and this doesn't allow us to move ->fixups into the union in arch_uprobe. Move this handle_riprel_post_xol() call into the new default_abort_op() hook and change arch_uprobe_abort_xol() accordingly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-21 22:58:17 +08:00
}
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
static struct uprobe_xol_ops default_xol_ops = {
.pre_xol = default_pre_xol_op,
.post_xol = default_post_xol_op,
uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if auprobe->ops != default_xol_ops. This is fine correctness wise, only default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and otherwise handle_riprel_post_xol() is nop. But this doesn't look clean and this doesn't allow us to move ->fixups into the union in arch_uprobe. Move this handle_riprel_post_xol() call into the new default_abort_op() hook and change arch_uprobe_abort_xol() accordingly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-21 22:58:17 +08:00
.abort = default_abort_op,
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
};
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
static bool branch_is_call(struct arch_uprobe *auprobe)
{
return auprobe->branch.opc1 == 0xe8;
}
uprobes/x86: Emulate relative conditional "short" jmp's Teach branch_emulate_op() to emulate the conditional "short" jmp's which check regs->flags. Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz. They all are rel8 and thus they can't trigger the problem, but perhaps we will add the support in future just for completeness. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 03:53:47 +08:00
#define CASE_COND \
COND(70, 71, XF(OF)) \
COND(72, 73, XF(CF)) \
COND(74, 75, XF(ZF)) \
COND(78, 79, XF(SF)) \
COND(7a, 7b, XF(PF)) \
COND(76, 77, XF(CF) || XF(ZF)) \
COND(7c, 7d, XF(SF) != XF(OF)) \
COND(7e, 7f, XF(ZF) || XF(SF) != XF(OF))
#define COND(op_y, op_n, expr) \
case 0x ## op_y: DO((expr) != 0) \
case 0x ## op_n: DO((expr) == 0)
#define XF(xf) (!!(flags & X86_EFLAGS_ ## xf))
static bool is_cond_jmp_opcode(u8 opcode)
{
switch (opcode) {
#define DO(expr) \
return true;
CASE_COND
#undef DO
default:
return false;
}
}
static bool check_jmp_cond(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
unsigned long flags = regs->flags;
switch (auprobe->branch.opc1) {
#define DO(expr) \
return expr;
CASE_COND
#undef DO
default: /* not a conditional jmp */
return true;
}
}
#undef XF
#undef COND
#undef CASE_COND
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
static bool branch_emulate_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
unsigned long new_ip = regs->ip += auprobe->branch.ilen;
uprobes/x86: Emulate relative conditional "short" jmp's Teach branch_emulate_op() to emulate the conditional "short" jmp's which check regs->flags. Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz. They all are rel8 and thus they can't trigger the problem, but perhaps we will add the support in future just for completeness. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 03:53:47 +08:00
unsigned long offs = (long)auprobe->branch.offs;
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
if (branch_is_call(auprobe)) {
/*
* If it fails we execute this (mangled, see the comment in
* branch_clear_offset) insn out-of-line. In the likely case
* this should trigger the trap, and the probed application
* should die or restart the same insn after it handles the
* signal, arch_uprobe_post_xol() won't be even called.
*
* But there is corner case, see the comment in ->post_xol().
*/
uprobes/x86: Introduce push_ret_address() Extract the "push return address" code from branch_emulate_op() into the new simple helper, push_ret_address(). It will have more users. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 01:21:38 +08:00
if (push_ret_address(regs, new_ip))
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
return false;
uprobes/x86: Emulate relative conditional "short" jmp's Teach branch_emulate_op() to emulate the conditional "short" jmp's which check regs->flags. Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz. They all are rel8 and thus they can't trigger the problem, but perhaps we will add the support in future just for completeness. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 03:53:47 +08:00
} else if (!check_jmp_cond(auprobe, regs)) {
offs = 0;
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
}
uprobes/x86: Emulate relative conditional "short" jmp's Teach branch_emulate_op() to emulate the conditional "short" jmp's which check regs->flags. Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz. They all are rel8 and thus they can't trigger the problem, but perhaps we will add the support in future just for completeness. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 03:53:47 +08:00
regs->ip = new_ip + offs;
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
return true;
}
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
static int branch_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
BUG_ON(!branch_is_call(auprobe));
/*
* We can only get here if branch_emulate_op() failed to push the ret
* address _and_ another thread expanded our stack before the (mangled)
* "call" insn was executed out-of-line. Just restore ->sp and restart.
* We could also restore ->ip and try to call branch_emulate_op() again.
*/
regs->sp += sizeof_long();
return -ERESTART;
}
static void branch_clear_offset(struct arch_uprobe *auprobe, struct insn *insn)
{
/*
* Turn this insn into "call 1f; 1:", this is what we will execute
* out-of-line if ->emulate() fails. We only need this to generate
* a trap, so that the probed task receives the correct signal with
* the properly filled siginfo.
*
* But see the comment in ->post_xol(), in the unlikely case it can
* succeed. So we need to ensure that the new ->ip can not fall into
* the non-canonical area and trigger #GP.
*
* We could turn it into (say) "pushf", but then we would need to
* divorce ->insn[] and ->ixol[]. We need to preserve the 1st byte
* of ->insn[] for set_orig_insn().
*/
memset(auprobe->insn + insn_offset_immediate(insn),
0, insn->immediate.nbytes);
}
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
static struct uprobe_xol_ops branch_xol_ops = {
.emulate = branch_emulate_op,
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
.post_xol = branch_post_xol_op,
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
};
/* Returns -ENOSYS if branch_xol_ops doesn't handle this insn */
static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
{
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
u8 opc1 = OPCODE1(insn);
uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns All branch insns on x86 can be prefixed with the operand-size override prefix, 0x66. It was only ever useful for performing jumps to 32-bit offsets in 16-bit code segments. In 32-bit code, such instructions are useless since they cause IP truncation to 16 bits, and in case of call insns, they save only 16 bits of return address and misalign the stack pointer as a "bonus". In 64-bit code, such instructions are treated differently by Intel and AMD CPUs: Intel ignores the prefix altogether, AMD treats them the same as in 32-bit mode. Before this patch, the emulation code would execute the instructions as if they have no 0x66 prefix. With this patch, we refuse to attach uprobes to such insns. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 01:08:24 +08:00
int i;
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
switch (opc1) {
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
case 0xeb: /* jmp 8 */
case 0xe9: /* jmp 32 */
uprobes/x86: Emulate nop's using ops->emulate() Finally we can kill the ugly (and very limited) code in __skip_sstep(). Just change branch_setup_xol_ops() to treat "nop" as jmp to the next insn. Thanks to lib/insn.c, it is clever enough. OPCODE1() == 0x90 includes "(rep;)+ nop;" at least, and (afaics) much more. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 03:06:10 +08:00
case 0x90: /* prefix* + nop; same as jmp with .offs = 0 */
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
break;
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
case 0xe8: /* call relative */
branch_clear_offset(auprobe, insn);
break;
uprobes/x86: Emulate relative conditional "short" jmp's Teach branch_emulate_op() to emulate the conditional "short" jmp's which check regs->flags. Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz. They all are rel8 and thus they can't trigger the problem, but perhaps we will add the support in future just for completeness. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 03:53:47 +08:00
uprobes/x86: Emulate relative conditional "near" jmp's Change branch_setup_xol_ops() to simply use opc1 = OPCODE2(insn) - 0x10 if OPCODE1() == 0x0f; this matches the "short" jmp which checks the same condition. Thanks to lib/insn.c, it does the rest correctly. branch->ilen/offs are correct no matter if this jmp is "near" or "short". Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 22:22:58 +08:00
case 0x0f:
if (insn->opcode.nbytes != 2)
return -ENOSYS;
/*
* If it is a "near" conditional jmp, OPCODE2() - 0x10 matches
* OPCODE1() of the "short" jmp which checks the same condition.
*/
opc1 = OPCODE2(insn) - 0x10;
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
default:
uprobes/x86: Emulate relative conditional "short" jmp's Teach branch_emulate_op() to emulate the conditional "short" jmp's which check regs->flags. Note: this doesn't support jcxz/jcexz, loope/loopz, and loopne/loopnz. They all are rel8 and thus they can't trigger the problem, but perhaps we will add the support in future just for completeness. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 03:53:47 +08:00
if (!is_cond_jmp_opcode(opc1))
return -ENOSYS;
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
}
uprobes/x86: Refuse to attach uprobe to "word-sized" branch insns All branch insns on x86 can be prefixed with the operand-size override prefix, 0x66. It was only ever useful for performing jumps to 32-bit offsets in 16-bit code segments. In 32-bit code, such instructions are useless since they cause IP truncation to 16 bits, and in case of call insns, they save only 16 bits of return address and misalign the stack pointer as a "bonus". In 64-bit code, such instructions are treated differently by Intel and AMD CPUs: Intel ignores the prefix altogether, AMD treats them the same as in 32-bit mode. Before this patch, the emulation code would execute the instructions as if they have no 0x66 prefix. With this patch, we refuse to attach uprobes to such insns. Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> Acked-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-25 01:08:24 +08:00
/*
* 16-bit overrides such as CALLW (66 e8 nn nn) are not supported.
* Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
* No one uses these insns, reject any branch insns with such prefix.
*/
for (i = 0; i < insn->prefixes.nbytes; i++) {
if (insn->prefixes.bytes[i] == 0x66)
return -ENOTSUPP;
}
uprobes/x86: Emulate relative call's See the previous "Emulate unconditional relative jmp's" which explains why we can not execute "jmp" out-of-line, the same applies to "call". Emulating of rip-relative call is trivial, we only need to additionally push the ret-address. If this fails, we execute this instruction out of line and this should trigger the trap, the probed application should die or the same insn will be restarted if a signal handler expands the stack. We do not even need ->post_xol() for this case. But there is a corner (and almost theoretical) case: another thread can expand the stack right before we execute this insn out of line. In this case it hit the same problem we are trying to solve. So we simply turn the probed insn into "call 1f; 1:" and add ->post_xol() which restores ->sp and restarts. Many thanks to Jonathan who finally found the standalone reproducer, otherwise I would never resolve the "random SIGSEGV's under systemtap" bug-report. Now that the problem is clear we can write the simplified test-case: void probe_func(void), callee(void); int failed = 1; asm ( ".text\n" ".align 4096\n" ".globl probe_func\n" "probe_func:\n" "call callee\n" "ret" ); /* * This assumes that: * * - &probe_func = 0x401000 + a_bit, aligned = 0x402000 * * - xol_vma->vm_start = TASK_SIZE_MAX - PAGE_SIZE = 0x7fffffffe000 * as xol_add_vma() asks; the 1st slot = 0x7fffffffe080 * * so we can target the non-canonical address from xol_vma using * the simple math below, 100 * 4096 is just the random offset */ asm (".org . + 0x800000000000 - 0x7fffffffe080 - 5 - 1 + 100 * 4096\n"); void callee(void) { failed = 0; } int main(void) { probe_func(); return failed; } It SIGSEGV's if you probe "probe_func" (although this is not very reliable, randomize_va_space/etc can change the placement of xol area). Note: as Denys Vlasenko pointed out, amd and intel treat "callw" (0x66 0xe8) differently. This patch relies on lib/insn.c and thus implements the intel's behaviour: 0x66 is simply ignored. Fortunately nothing sane should ever use this insn, so we postpone the fix until we decide what should we do; emulate or not, support or not, etc. Reported-by: Jonathan Lebon <jlebon@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-07 00:11:02 +08:00
auprobe->branch.opc1 = opc1;
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
auprobe->branch.ilen = insn->length;
auprobe->branch.offs = insn->immediate.value;
auprobe->ops = &branch_xol_ops;
return 0;
}
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
/**
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
* arch_uprobe_analyze_insn - instruction analysis including validity and fixups.
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* @mm: the probed address space.
uprobes/core: Move insn to arch specific structure Few cleanups suggested by Ingo Molnar. - Rename struct uprobe_arch_info to struct arch_uprobe. - Move insn from struct uprobe to struct arch_uprobe. - Make arch specific uprobe functions to accept struct arch_uprobe instead of struct uprobe. - Move struct uprobe to kernel/uprobes.c from include/linux/uprobes.h Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Josh Stone <jistone@redhat.com> Link: http://lkml.kernel.org/r/20120222091602.15880.40249.sendpatchset@srdronam.in.ibm.com [ Made various small improvements ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 17:16:02 +08:00
* @arch_uprobe: the probepoint information.
uprobes: Pass probed vaddr to arch_uprobe_analyze_insn() On RISC architectures like powerpc, instructions are fixed size. Instruction analysis on such platforms is just a matter of (insn % 4). Pass the vaddr at which the uprobe is to be inserted so that arch_uprobe_analyze_insn() can flag misaligned registration requests. Signed-off-by: Ananth N Mavinakaynahalli <ananth@in.ibm.com> Cc: michael@ellerman.id.au Cc: antonb@thinktux.localdomain Cc: Paul Mackerras <paulus@samba.org> Cc: benh@kernel.crashing.org Cc: peterz@infradead.org Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: oleg@redhat.com Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20120608093257.GG13409@in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-08 17:32:57 +08:00
* @addr: virtual address at which to install the probepoint
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
* Return 0 on success or a -ve number on error.
*/
uprobes: Pass probed vaddr to arch_uprobe_analyze_insn() On RISC architectures like powerpc, instructions are fixed size. Instruction analysis on such platforms is just a matter of (insn % 4). Pass the vaddr at which the uprobe is to be inserted so that arch_uprobe_analyze_insn() can flag misaligned registration requests. Signed-off-by: Ananth N Mavinakaynahalli <ananth@in.ibm.com> Cc: michael@ellerman.id.au Cc: antonb@thinktux.localdomain Cc: Paul Mackerras <paulus@samba.org> Cc: benh@kernel.crashing.org Cc: peterz@infradead.org Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: oleg@redhat.com Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20120608093257.GG13409@in.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-08 17:32:57 +08:00
int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long addr)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
{
struct insn insn;
uprobes/x86: Cleanup the usage of UPROBE_FIX_IP/UPROBE_FIX_CALL Now that UPROBE_FIX_IP/UPROBE_FIX_CALL are mutually exclusive we can use a single "fix_ip_or_call" enum instead of 2 fix_* booleans. This way the logic looks more understandable and clean to me. While at it, join "case 0xea" with other "ip is correct" ret/lret cases. Also change default_post_xol_op() to use "else if" for the same reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-26 00:53:32 +08:00
u8 fix_ip_or_call = UPROBE_FIX_IP;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
int ret;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
uprobes/x86: Add is_64bit_mm(), kill validate_insn_bits() 1. Extract the ->ia32_compat check from 64bit validate_insn_bits() into the new helper, is_64bit_mm(), it will have more users. TODO: this checks is actually wrong if mm owner is X32 task, we need another fix which changes set_personality_ia32(). TODO: even worse, the whole 64-or-32-bit logic is very broken and the fix is not simple, we need the nontrivial changes in the core uprobes code. 2. Kill validate_insn_bits() and change its single caller to use uprobe_init_insn(is_64bit_mm(mm). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-19 20:03:05 +08:00
ret = uprobe_init_insn(auprobe, &insn, is_64bit_mm(mm));
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
if (ret)
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return ret;
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
uprobes/x86: Emulate unconditional relative jmp's Currently we always execute all insns out-of-line, including relative jmp's and call's. This assumes that even if regs->ip points to nowhere after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will update it correctly. However, this doesn't work if this regs->ip == xol_vaddr + insn_offset is not canonical. In this case CPU generates #GP and general_protection() kills the task which tries to execute this insn out-of-line. Now that we have uprobe_xol_ops we can teach uprobes to emulate these insns and solve the problem. This patch adds branch_xol_ops which has a single branch_emulate_op() hook, so far it can only handle rel8/32 relative jmp's. TODO: move ->fixup into the union along with rip_rela_target_address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Jonathan Lebon <jlebon@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 02:05:02 +08:00
ret = branch_setup_xol_ops(auprobe, &insn);
if (ret != -ENOSYS)
return ret;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
/*
uprobes/x86: Move default_xol_ops's data into arch_uprobe->def Finally we can move arch_uprobe->fixups/rip_rela_target_address into the new "def" struct and place this struct in the union, they are only used by default_xol_ops paths. The patch also renames rip_rela_target_address to riprel_target just to make this name shorter. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 22:20:55 +08:00
* Figure out which fixups default_post_xol_op() will need to perform,
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
* and annotate defparam->fixups accordingly.
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
*/
switch (OPCODE1(&insn)) {
case 0x9d: /* popf */
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
auprobe->defparam.fixups |= UPROBE_FIX_SETF;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
break;
case 0xc3: /* ret or lret -- ip is correct */
case 0xcb:
case 0xc2:
case 0xca:
uprobes/x86: Cleanup the usage of UPROBE_FIX_IP/UPROBE_FIX_CALL Now that UPROBE_FIX_IP/UPROBE_FIX_CALL are mutually exclusive we can use a single "fix_ip_or_call" enum instead of 2 fix_* booleans. This way the logic looks more understandable and clean to me. While at it, join "case 0xea" with other "ip is correct" ret/lret cases. Also change default_post_xol_op() to use "else if" for the same reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-26 00:53:32 +08:00
case 0xea: /* jmp absolute -- ip is correct */
fix_ip_or_call = 0;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
break;
case 0x9a: /* call absolute - Fix return addr, not ip */
uprobes/x86: Cleanup the usage of UPROBE_FIX_IP/UPROBE_FIX_CALL Now that UPROBE_FIX_IP/UPROBE_FIX_CALL are mutually exclusive we can use a single "fix_ip_or_call" enum instead of 2 fix_* booleans. This way the logic looks more understandable and clean to me. While at it, join "case 0xea" with other "ip is correct" ret/lret cases. Also change default_post_xol_op() to use "else if" for the same reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-26 00:53:32 +08:00
fix_ip_or_call = UPROBE_FIX_CALL;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
break;
case 0xff:
switch (MODRM_REG(&insn)) {
case 2: case 3: /* call or lcall, indirect */
uprobes/x86: Cleanup the usage of UPROBE_FIX_IP/UPROBE_FIX_CALL Now that UPROBE_FIX_IP/UPROBE_FIX_CALL are mutually exclusive we can use a single "fix_ip_or_call" enum instead of 2 fix_* booleans. This way the logic looks more understandable and clean to me. While at it, join "case 0xea" with other "ip is correct" ret/lret cases. Also change default_post_xol_op() to use "else if" for the same reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-26 00:53:32 +08:00
fix_ip_or_call = UPROBE_FIX_CALL;
break;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
case 4: case 5: /* jmp or ljmp, indirect */
uprobes/x86: Cleanup the usage of UPROBE_FIX_IP/UPROBE_FIX_CALL Now that UPROBE_FIX_IP/UPROBE_FIX_CALL are mutually exclusive we can use a single "fix_ip_or_call" enum instead of 2 fix_* booleans. This way the logic looks more understandable and clean to me. While at it, join "case 0xea" with other "ip is correct" ret/lret cases. Also change default_post_xol_op() to use "else if" for the same reason. Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-04-26 00:53:32 +08:00
fix_ip_or_call = 0;
break;
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
}
uprobes/x86: Conditionalize the usage of handle_riprel_insn() arch_uprobe_analyze_insn() calls handle_riprel_insn() at the start, but only "0xff" and "default" cases need the UPROBE_FIX_RIP_ logic. Move the callsite into "default" case and change the "0xff" case to fall-through. We are going to add the various hooks to handle the rip-relative jmp/call instructions (and more), we need this change to enforce the fact that the new code can not conflict with is_riprel_insn() logic which, after this change, can only be used by default_xol_ops. Note: arch_uprobe_abort_xol() still calls handle_riprel_post_xol() directly. This is fine unless another _xol_ops we may add later will need to reuse "UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX" bits in ->fixup. In this case we can add uprobe_xol_ops->abort() hook, which (perhaps) we will need anyway in the long term. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-03-31 23:24:14 +08:00
/* fall through */
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
default:
uprobes/x86: Rename *riprel* helpers to make the naming consistent handle_riprel_insn(), pre_xol_rip_insn() and handle_riprel_post_xol() look confusing and inconsistent. Rename them into riprel_analyze(), riprel_pre_xol(), and riprel_post_xol() respectively. No changes in compiled code. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-27 22:31:59 +08:00
riprel_analyze(auprobe, &insn);
uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() No functional changes, preparation. Shift the code from prepare_fixups() to arch_uprobe_analyze_insn() with the following modifications: - Do not call insn_get_opcode() again, it was already called by validate_insn_bits(). - Move "case 0xea" up. This way "case 0xff" can fall through to default case. - change "case 0xff" to use the nested "switch (MODRM_REG)", this way the code looks a bit simpler. - Make the comments look consistent. While at it, kill the initialization of rip_rela_target_address and ->fixups, we can rely on kzalloc(). We will add the new members into arch_uprobe, it would be better to assume that everything is zero by default. TODO: cleanup/fix the mess in validate_insn_bits() paths: - validate_insn_64bits() and validate_insn_32bits() should be unified. - "ifdef" is not used consistently; if good_insns_64 depends on CONFIG_X86_64, then probably good_insns_32 should depend on CONFIG_X86_32/EMULATION - the usage of mm->context.ia32_compat looks wrong if the task is TIF_X32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-03-31 21:16:22 +08:00
}
uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates Purely cosmetic, no changes in .o, 1. As Jim pointed out arch_uprobe->def looks ambiguous, rename it to ->defparam. 2. Add the comment into default_post_xol_op() to explain "regs->sp +=". 3. Remove the stale part of the comment in arch_uprobe_analyze_insn(). Suggested-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2014-06-02 03:13:46 +08:00
auprobe->defparam.ilen = insn.length;
auprobe->defparam.fixups |= fix_ip_or_call;
uprobes/core: Clean up, refactor and improve the code Make the uprobes code readable to me: - improve the Kconfig text so that a mere mortal gets some idea what CONFIG_UPROBES=y is really about - do trivial renames to standardize around the uprobes_*() namespace - clean up and simplify various code flow details - separate basic blocks of functionality - line break artifact and white space related removal - use standard local varible definition blocks - use vertical spacing to make things more readable - remove unnecessary volatile - restructure comment blocks to make them more uniform and more readable in general Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Link: http://lkml.kernel.org/n/tip-ewbwhb8o6navvllsauu7k07p@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-17 16:27:41 +08:00
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
auprobe->ops = &default_xol_ops;
uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints Add uprobes support to the core kernel, with x86 support. This commit adds the kernel facilities, the actual uprobes user-space ABI and perf probe support comes in later commits. General design: Uprobes are maintained in an rb-tree indexed by inode and offset (the offset here is from the start of the mapping). For a unique (inode, offset) tuple, there can be at most one uprobe in the rb-tree. Since the (inode, offset) tuple identifies a unique uprobe, more than one user may be interested in the same uprobe. This provides the ability to connect multiple 'consumers' to the same uprobe. Each consumer defines a handler and a filter (optional). The 'handler' is run every time the uprobe is hit, if it matches the 'filter' criteria. The first consumer of a uprobe causes the breakpoint to be inserted at the specified address and subsequent consumers are appended to this list. On subsequent probes, the consumer gets appended to the existing list of consumers. The breakpoint is removed when the last consumer unregisters. For all other unregisterations, the consumer is removed from the list of consumers. Given a inode, we get a list of the mms that have mapped the inode. Do the actual registration if mm maps the page where a probe needs to be inserted/removed. We use a temporary list to walk through the vmas that map the inode. - The number of maps that map the inode, is not known before we walk the rmap and keeps changing. - extending vm_area_struct wasn't recommended, it's a size-critical data structure. - There can be more than one maps of the inode in the same mm. We add callbacks to the mmap methods to keep an eye on text vmas that are of interest to uprobes. When a vma of interest is mapped, we insert the breakpoint at the right address. Uprobe works by replacing the instruction at the address defined by (inode, offset) with the arch specific breakpoint instruction. We save a copy of the original instruction at the uprobed address. This is needed for: a. executing the instruction out-of-line (xol). b. instruction analysis for any subsequent fixups. c. restoring the instruction back when the uprobe is unregistered. We insert or delete a breakpoint instruction, and this breakpoint instruction is assumed to be the smallest instruction available on the platform. For fixed size instruction platforms this is trivially true, for variable size instruction platforms the breakpoint instruction is typically the smallest (often a single byte). Writing the instruction is done by COWing the page and changing the instruction during the copy, this even though most platforms allow atomic writes of the breakpoint instruction. This also mirrors the behaviour of a ptrace() memory write to a PRIVATE file map. The core worker is derived from KSM's replace_page() logic. In essence, similar to KSM: a. allocate a new page and copy over contents of the page that has the uprobed vaddr b. modify the copy and insert the breakpoint at the required address c. switch the original page with the copy containing the breakpoint d. flush page tables. replace_page() is being replicated here because of some minor changes in the type of pages and also because Hugh Dickins had plans to improve replace_page() for KSM specific work. Instruction analysis on x86 is based on instruction decoder and determines if an instruction can be probed and determines the necessary fixups after singlestep. Instruction analysis is done at probe insertion time so that we avoid having to repeat the same analysis every time a probe is hit. A lot of code here is due to the improvement/suggestions/inputs from Peter Zijlstra. Changelog: (v10): - Add code to clear REX.B prefix as suggested by Denys Vlasenko and Masami Hiramatsu. (v9): - Use insn_offset_modrm as suggested by Masami Hiramatsu. (v7): Handle comments from Peter Zijlstra: - Dont take reference to inode. (expect inode to uprobe_register to be sane). - Use PTR_ERR to set the return value. - No need to take reference to inode. - use PTR_ERR to return error value. - register and uprobe_unregister share code. (v5): - Modified del_consumer as per comments from Peter. - Drop reference to inode before dropping reference to uprobe. - Use i_size_read(inode) instead of inode->i_size. - Ensure uprobe->consumers is NULL, before __uprobe_unregister() is called. - Includes errno.h as recommended by Stephen Rothwell to fix a build issue on sparc defconfig - Remove restrictions while unregistering. - Earlier code leaked inode references under some conditions while registering/unregistering. - Continue the vma-rmap walk even if the intermediate vma doesnt meet the requirements. - Validate the vma found by find_vma before inserting/removing the breakpoint - Call del_consumer under mutex_lock. - Use hash locks. - Handle mremap. - Introduce find_least_offset_node() instead of close match logic in find_uprobe - Uprobes no more depends on MM_OWNER; No reference to task_structs while inserting/removing a probe. - Uses read_mapping_page instead of grab_cache_page so that the pages have valid content. - pass NULL to get_user_pages for the task parameter. - call SetPageUptodate on the new page allocated in write_opcode. - fix leaking a reference to the new page under certain conditions. - Include Instruction Decoder if Uprobes gets defined. - Remove const attributes for instruction prefix arrays. - Uses mm_context to know if the application is 32 bit. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Also-written-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Roland McGrath <roland@hack.frob.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Anton Arapov <anton@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-mm <linux-mm@kvack.org> Link: http://lkml.kernel.org/r/20120209092642.GE16600@linux.vnet.ibm.com [ Made various small edits to the commit log ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-09 17:26:42 +08:00
return 0;
}
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
/*
* arch_uprobe_pre_xol - prepare to execute out of line.
* @auprobe: the probepoint information.
* @regs: reflects the saved user state of current task.
*/
int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks No functional changes. Preparation to simplify the review of the next change. Just reorder the code in arch_uprobe_pre/post_xol() functions so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end. Also change arch_uprobe_pre_xol() to use utask instead of autask, to make the code more symmetrical with arch_uprobe_post_xol(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-01 01:38:09 +08:00
struct uprobe_task *utask = current->utask;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
uprobes/x86: Don't change the task's state if ->pre_xol() fails Currently this doesn't matter, the only ->pre_xol() hook can't fail, but we need to fix arch_uprobe_pre_xol() anyway. If ->pre_xol() fails we should not change regs->ip/flags, we should just return the error to make restart actually possible. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 21:20:07 +08:00
if (auprobe->ops->pre_xol) {
int err = auprobe->ops->pre_xol(auprobe, regs);
if (err)
return err;
}
uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks No functional changes. Preparation to simplify the review of the next change. Just reorder the code in arch_uprobe_pre/post_xol() functions so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end. Also change arch_uprobe_pre_xol() to use utask instead of autask, to make the code more symmetrical with arch_uprobe_post_xol(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-01 01:38:09 +08:00
regs->ip = utask->xol_vaddr;
utask->autask.saved_trap_nr = current->thread.trap_nr;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
current->thread.trap_nr = UPROBE_TRAP_NR;
uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks No functional changes. Preparation to simplify the review of the next change. Just reorder the code in arch_uprobe_pre/post_xol() functions so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end. Also change arch_uprobe_pre_xol() to use utask instead of autask, to make the code more symmetrical with arch_uprobe_post_xol(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-01 01:38:09 +08:00
utask->autask.saved_tf = !!(regs->flags & X86_EFLAGS_TF);
uprobes/x86: Cleanup the single-stepping code No functional changes. Now that default arch_uprobe_enable/disable_step() helpers do nothing, x86 has no reason to reimplement them. Change arch_uprobe_*_xol() hooks to do the necessary work and remove the x86-specific hooks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-10-29 00:57:30 +08:00
regs->flags |= X86_EFLAGS_TF;
if (test_tsk_thread_flag(current, TIF_BLOCKSTEP))
set_task_blockstep(current, false);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
return 0;
}
/*
* If xol insn itself traps and generates a signal(Say,
* SIGILL/SIGSEGV/etc), then detect the case where a singlestepped
* instruction jumps back to its own address. It is assumed that anything
* like do_page_fault/do_trap/etc sets thread.trap_nr != -1.
*
* arch_uprobe_pre_xol/arch_uprobe_post_xol save/restore thread.trap_nr,
* arch_uprobe_xol_was_trapped() simply checks that ->trap_nr is not equal to
* UPROBE_TRAP_NR == -1 set by arch_uprobe_pre_xol().
*/
bool arch_uprobe_xol_was_trapped(struct task_struct *t)
{
if (t->thread.trap_nr != UPROBE_TRAP_NR)
return true;
return false;
}
/*
* Called after single-stepping. To avoid the SMP problems that can
* occur when we temporarily put back the original opcode to
* single-step, we single-stepped a copy of the instruction.
*
* This function prepares to resume execution after the single-step.
*/
int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks No functional changes. Preparation to simplify the review of the next change. Just reorder the code in arch_uprobe_pre/post_xol() functions so that UPROBE_FIX_{RIP_*,IP,CALL} logic goes to the end. Also change arch_uprobe_pre_xol() to use utask instead of autask, to make the code more symmetrical with arch_uprobe_post_xol(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2014-04-01 01:38:09 +08:00
struct uprobe_task *utask = current->utask;
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
bool send_sigtrap = utask->autask.saved_tf;
int err = 0;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR);
uprobes/x86: Don't use arch_uprobe_abort_xol() in arch_uprobe_post_xol() 014940bad8e4 "uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails" changed arch_uprobe_post_xol() to use arch_uprobe_abort_xol() if ->post_xol fails. This was correct and helped to avoid the additional complications, we need to clear X86_EFLAGS_TF in this case. However, now that we have uprobe_xol_ops->abort() hook it would be better to avoid arch_uprobe_abort_xol() here. ->post_xol() should likely do what ->abort() does anyway, we should not do the same work twice. Currently only handle_riprel_post_xol() can be called twice, this is unnecessary but safe. Still this is not clean and can lead to the problems in future. Change arch_uprobe_post_xol() to clear X86_EFLAGS_TF and restore ->ip by hand and avoid arch_uprobe_abort_xol(). This temporary uglifies the usage of autask.saved_tf, we will cleanup this later. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 00:28:02 +08:00
current->thread.trap_nr = utask->autask.saved_trap_nr;
uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails Currently the error from arch_uprobe_post_xol() is silently ignored. This doesn't look good and this can lead to the hard-to-debug problems. 1. Change handle_singlestep() to loudly complain and send SIGILL. Note: this only affects x86, ppc/arm can't fail. 2. Change arch_uprobe_post_xol() to call arch_uprobe_abort_xol() and avoid TF games if it is going to return an error. This can help to to analyze the problem, if nothing else we should not report ->ip = xol_slot in the core-file. Note: this means that handle_riprel_post_xol() can be called twice, but this is fine because it is idempotent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:20:10 +08:00
if (auprobe->ops->post_xol) {
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
err = auprobe->ops->post_xol(auprobe, regs);
uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails Currently the error from arch_uprobe_post_xol() is silently ignored. This doesn't look good and this can lead to the hard-to-debug problems. 1. Change handle_singlestep() to loudly complain and send SIGILL. Note: this only affects x86, ppc/arm can't fail. 2. Change arch_uprobe_post_xol() to call arch_uprobe_abort_xol() and avoid TF games if it is going to return an error. This can help to to analyze the problem, if nothing else we should not report ->ip = xol_slot in the core-file. Note: this means that handle_riprel_post_xol() can be called twice, but this is fine because it is idempotent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:20:10 +08:00
if (err) {
uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible SIGILL after the failed arch_uprobe_post_xol() should only be used as a last resort, we should try to restart the probed insn if possible. Currently only adjust_ret_addr() can fail, and this can only happen if another thread unmapped our stack after we executed "call" out-of-line. Most probably the application if buggy, but even in this case it can have a handler for SIGSEGV/etc. And in theory it can be even correct and do something non-trivial with its memory. Of course we can't restart unconditionally, so arch_uprobe_post_xol() does this only if ->post_xol() returns -ERESTART even if currently this is the only possible error. default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim pointed out it should not forget to pop off the return address pushed by this insn executed out-of-line. Note: this is not "perfect", we do not want the extra handler_chain() after restart, but I think this is the best solution we can realistically do without too much uglifications. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:52:19 +08:00
/*
uprobes/x86: Don't use arch_uprobe_abort_xol() in arch_uprobe_post_xol() 014940bad8e4 "uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails" changed arch_uprobe_post_xol() to use arch_uprobe_abort_xol() if ->post_xol fails. This was correct and helped to avoid the additional complications, we need to clear X86_EFLAGS_TF in this case. However, now that we have uprobe_xol_ops->abort() hook it would be better to avoid arch_uprobe_abort_xol() here. ->post_xol() should likely do what ->abort() does anyway, we should not do the same work twice. Currently only handle_riprel_post_xol() can be called twice, this is unnecessary but safe. Still this is not clean and can lead to the problems in future. Change arch_uprobe_post_xol() to clear X86_EFLAGS_TF and restore ->ip by hand and avoid arch_uprobe_abort_xol(). This temporary uglifies the usage of autask.saved_tf, we will cleanup this later. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 00:28:02 +08:00
* Restore ->ip for restart or post mortem analysis.
* ->post_xol() must not return -ERESTART unless this
* is really possible.
uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible SIGILL after the failed arch_uprobe_post_xol() should only be used as a last resort, we should try to restart the probed insn if possible. Currently only adjust_ret_addr() can fail, and this can only happen if another thread unmapped our stack after we executed "call" out-of-line. Most probably the application if buggy, but even in this case it can have a handler for SIGSEGV/etc. And in theory it can be even correct and do something non-trivial with its memory. Of course we can't restart unconditionally, so arch_uprobe_post_xol() does this only if ->post_xol() returns -ERESTART even if currently this is the only possible error. default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim pointed out it should not forget to pop off the return address pushed by this insn executed out-of-line. Note: this is not "perfect", we do not want the extra handler_chain() after restart, but I think this is the best solution we can realistically do without too much uglifications. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:52:19 +08:00
*/
uprobes/x86: Don't use arch_uprobe_abort_xol() in arch_uprobe_post_xol() 014940bad8e4 "uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails" changed arch_uprobe_post_xol() to use arch_uprobe_abort_xol() if ->post_xol fails. This was correct and helped to avoid the additional complications, we need to clear X86_EFLAGS_TF in this case. However, now that we have uprobe_xol_ops->abort() hook it would be better to avoid arch_uprobe_abort_xol() here. ->post_xol() should likely do what ->abort() does anyway, we should not do the same work twice. Currently only handle_riprel_post_xol() can be called twice, this is unnecessary but safe. Still this is not clean and can lead to the problems in future. Change arch_uprobe_post_xol() to clear X86_EFLAGS_TF and restore ->ip by hand and avoid arch_uprobe_abort_xol(). This temporary uglifies the usage of autask.saved_tf, we will cleanup this later. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 00:28:02 +08:00
regs->ip = utask->vaddr;
uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible SIGILL after the failed arch_uprobe_post_xol() should only be used as a last resort, we should try to restart the probed insn if possible. Currently only adjust_ret_addr() can fail, and this can only happen if another thread unmapped our stack after we executed "call" out-of-line. Most probably the application if buggy, but even in this case it can have a handler for SIGSEGV/etc. And in theory it can be even correct and do something non-trivial with its memory. Of course we can't restart unconditionally, so arch_uprobe_post_xol() does this only if ->post_xol() returns -ERESTART even if currently this is the only possible error. default_post_xol_op(UPROBE_FIX_CALL) can always restart, but as Jim pointed out it should not forget to pop off the return address pushed by this insn executed out-of-line. Note: this is not "perfect", we do not want the extra handler_chain() after restart, but I think this is the best solution we can realistically do without too much uglifications. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:52:19 +08:00
if (err == -ERESTART)
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
err = 0;
send_sigtrap = false;
uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails Currently the error from arch_uprobe_post_xol() is silently ignored. This doesn't look good and this can lead to the hard-to-debug problems. 1. Change handle_singlestep() to loudly complain and send SIGILL. Note: this only affects x86, ppc/arm can't fail. 2. Change arch_uprobe_post_xol() to call arch_uprobe_abort_xol() and avoid TF games if it is going to return an error. This can help to to analyze the problem, if nothing else we should not report ->ip = xol_slot in the core-file. Note: this means that handle_riprel_post_xol() can be called twice, but this is fine because it is idempotent. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-04 02:20:10 +08:00
}
}
uprobes/x86: Cleanup the single-stepping code No functional changes. Now that default arch_uprobe_enable/disable_step() helpers do nothing, x86 has no reason to reimplement them. Change arch_uprobe_*_xol() hooks to do the necessary work and remove the x86-specific hooks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-10-29 00:57:30 +08:00
/*
* arch_uprobe_pre_xol() doesn't save the state of TIF_BLOCKSTEP
* so we can get an extra SIGTRAP if we do not clear TF. We need
* to examine the opcode to make it right.
*/
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
if (send_sigtrap)
uprobes/x86: Cleanup the single-stepping code No functional changes. Now that default arch_uprobe_enable/disable_step() helpers do nothing, x86 has no reason to reimplement them. Change arch_uprobe_*_xol() hooks to do the necessary work and remove the x86-specific hooks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-10-29 00:57:30 +08:00
send_sig(SIGTRAP, current, 0);
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
if (!utask->autask.saved_tf)
uprobes/x86: Cleanup the single-stepping code No functional changes. Now that default arch_uprobe_enable/disable_step() helpers do nothing, x86 has no reason to reimplement them. Change arch_uprobe_*_xol() hooks to do the necessary work and remove the x86-specific hooks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-10-29 00:57:30 +08:00
regs->flags &= ~X86_EFLAGS_TF;
uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() UPROBE_FIX_SETF is only needed to handle "popf" correctly but it is processed by the generic arch_uprobe_post_xol() code. This doesn't allows us to make ->fixups private for default_xol_ops. 1 Change default_post_xol_op(UPROBE_FIX_SETF) to set ->saved_tf = T. "popf" always reads the flags from stack, it doesn't matter if TF was set or not before single-step. Ignoring the naming, this is even more logical, "saved_tf" means "owned by application" and we do not own this flag after "popf". 2. Change arch_uprobe_post_xol() to save ->saved_tf into the local "bool send_sigtrap" before ->post_xol(). 3. Change arch_uprobe_post_xol() to ignore UPROBE_FIX_SETF and just check ->saved_tf after ->post_xol(). With this patch ->fixups and ->rip_rela_target_address are only used by default_xol_ops hooks, we are ready to remove them from the common part of arch_uprobe. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 02:39:56 +08:00
return err;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
/* callback routine for handling exceptions. */
int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data)
{
struct die_args *args = data;
struct pt_regs *regs = args->regs;
int ret = NOTIFY_DONE;
/* We are only interested in userspace traps */
x86/asm/entry: Change all 'user_mode_vm()' calls to 'user_mode()' user_mode_vm() and user_mode() are now the same. Change all callers of user_mode_vm() to user_mode(). The next patch will remove the definition of user_mode_vm. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/43b1f57f3df70df5a08b0925897c660725015554.1426728647.git.luto@kernel.org [ Merged to a more recent kernel. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-19 09:33:33 +08:00
if (regs && !user_mode(regs))
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
return NOTIFY_DONE;
switch (val) {
case DIE_INT3:
if (uprobe_pre_sstep_notifier(regs))
ret = NOTIFY_STOP;
break;
case DIE_DEBUG:
if (uprobe_post_sstep_notifier(regs))
ret = NOTIFY_STOP;
default:
break;
}
return ret;
}
/*
* This function gets called when XOL instruction either gets trapped or
uprobes/x86: Don't use arch_uprobe_abort_xol() in arch_uprobe_post_xol() 014940bad8e4 "uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails" changed arch_uprobe_post_xol() to use arch_uprobe_abort_xol() if ->post_xol fails. This was correct and helped to avoid the additional complications, we need to clear X86_EFLAGS_TF in this case. However, now that we have uprobe_xol_ops->abort() hook it would be better to avoid arch_uprobe_abort_xol() here. ->post_xol() should likely do what ->abort() does anyway, we should not do the same work twice. Currently only handle_riprel_post_xol() can be called twice, this is unnecessary but safe. Still this is not clean and can lead to the problems in future. Change arch_uprobe_post_xol() to clear X86_EFLAGS_TF and restore ->ip by hand and avoid arch_uprobe_abort_xol(). This temporary uglifies the usage of autask.saved_tf, we will cleanup this later. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-22 00:28:02 +08:00
* the thread has a fatal signal. Reset the instruction pointer to its
* probed address for the potential restart or for post mortem analysis.
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
*/
void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
struct uprobe_task *utask = current->utask;
uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if auprobe->ops != default_xol_ops. This is fine correctness wise, only default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and otherwise handle_riprel_post_xol() is nop. But this doesn't look clean and this doesn't allow us to move ->fixups into the union in arch_uprobe. Move this handle_riprel_post_xol() call into the new default_abort_op() hook and change arch_uprobe_abort_xol() accordingly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-21 22:58:17 +08:00
if (auprobe->ops->abort)
auprobe->ops->abort(auprobe, regs);
uprobes/x86: Cleanup the single-stepping code No functional changes. Now that default arch_uprobe_enable/disable_step() helpers do nothing, x86 has no reason to reimplement them. Change arch_uprobe_*_xol() hooks to do the necessary work and remove the x86-specific hooks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-10-29 00:57:30 +08:00
uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() arch_uprobe_abort_xol() calls handle_riprel_post_xol() even if auprobe->ops != default_xol_ops. This is fine correctness wise, only default_pre_xol_op() can set UPROBE_FIX_RIP_AX|UPROBE_FIX_RIP_CX and otherwise handle_riprel_post_xol() is nop. But this doesn't look clean and this doesn't allow us to move ->fixups into the union in arch_uprobe. Move this handle_riprel_post_xol() call into the new default_abort_op() hook and change arch_uprobe_abort_xol() accordingly. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-21 22:58:17 +08:00
current->thread.trap_nr = utask->autask.saved_trap_nr;
regs->ip = utask->vaddr;
uprobes/x86: Cleanup the single-stepping code No functional changes. Now that default arch_uprobe_enable/disable_step() helpers do nothing, x86 has no reason to reimplement them. Change arch_uprobe_*_xol() hooks to do the necessary work and remove the x86-specific hooks. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-10-29 00:57:30 +08:00
/* clear TF if it was set by us in arch_uprobe_pre_xol() */
if (!utask->autask.saved_tf)
regs->flags &= ~X86_EFLAGS_TF;
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
}
uprobes/x86: Xol should send SIGTRAP if X86_EFLAGS_TF was set arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and returns to user-mode. But this means the application gets SIGTRAP only after the next insn. This means that UPROBE_CLEAR_TF logic is not really right. _enable should only record the state of X86_EFLAGS_TF, and _disable should check it separately from UPROBE_FIX_SETF. Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and change enable/disable accordingly. This assumes that the probed insn was not trapped, see the next patch. arch_uprobe_skip_sstep() logic has the same problem, change it to check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this all after we fold enable/disable_step into pre/post_hol hooks. Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap(). But this needs more changes, handle_swbp() does the same and this is equally wrong. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-03 22:05:10 +08:00
static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
{
uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Introduce arch_uprobe->ops pointing to the "struct uprobe_xol_ops", move the current UPROBE_FIX_{RIP*,IP,CALL} code into the default set of methods and change arch_uprobe_pre/post_xol() accordingly. This way we can add the new uprobe_xol_ops's to handle the insns which need the special processing (rip-relative jmp/call at least). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
2014-04-01 03:01:31 +08:00
if (auprobe->ops->emulate)
return auprobe->ops->emulate(auprobe, regs);
uprobes/core: Handle breakpoint and singlestep exceptions Uprobes uses exception notifiers to get to know if a thread hit a breakpoint or a singlestep exception. When a thread hits a uprobe or is singlestepping post a uprobe hit, the uprobe exception notifier sets its TIF_UPROBE bit, which will then be checked on its return to userspace path (do_notify_resume() ->uprobe_notify_resume()), where the consumers handlers are run (in task context) based on the defined filters. Uprobe hits are thread specific and hence we need to maintain information about if a task hit a uprobe, what uprobe was hit, the slot where the original instruction was copied for xol so that it can be singlestepped with appropriate fixups. In some cases, special care is needed for instructions that are executed out of line (xol). These are architecture specific artefacts, such as handling RIP relative instructions on x86_64. Since the instruction at which the uprobe was inserted is executed out of line, architecture specific fixups are added so that the thread continues normal execution in the presence of a uprobe. Postpone the signals until we execute the probed insn. post_xol() path does a recalc_sigpending() before return to user-mode, this ensures the signal can't be lost. Uprobes relies on DIE_DEBUG notification to notify if a singlestep is complete. Adds x86 specific uprobe exception notifiers and appropriate hooks needed to determine a uprobe hit and subsequent post processing. Add requisite x86 fixups for xol for uprobes. Specific cases needing fixups include relative jumps (x86_64), calls, etc. Where possible, we check and skip singlestepping the breakpointed instructions. For now we skip single byte as well as few multibyte nop instructions. However this can be extended to other instructions too. Credits to Oleg Nesterov for suggestions/patches related to signal, breakpoint, singlestep handling code. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Linux-mm <linux-mm@kvack.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20120313180011.29771.89027.sendpatchset@srdronam.in.ibm.com [ Performed various cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-14 02:00:11 +08:00
return false;
}
uprobes/x86: Implement x86 specific arch_uprobe_*_step The arch specific implementation behaves like user_enable_single_step() except that it does not disable single stepping if it was already enabled by ptrace. This allows the debugger to single step over an uprobe. The state of block stepping is not restored. It makes only sense together with TF and if that was enabled then the debugger is notified. Note: this is still not correct. For example, TIF_SINGLESTEP check is not right, the application itself can set X86_EFLAGS_TF. And otoh we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf". See the next patches, we need the changes in arch/x86/kernel/step.c first. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-08-20 18:47:34 +08:00
uprobes/x86: Xol should send SIGTRAP if X86_EFLAGS_TF was set arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and returns to user-mode. But this means the application gets SIGTRAP only after the next insn. This means that UPROBE_CLEAR_TF logic is not really right. _enable should only record the state of X86_EFLAGS_TF, and _disable should check it separately from UPROBE_FIX_SETF. Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and change enable/disable accordingly. This assumes that the probed insn was not trapped, see the next patch. arch_uprobe_skip_sstep() logic has the same problem, change it to check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this all after we fold enable/disable_step into pre/post_hol hooks. Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap(). But this needs more changes, handle_swbp() does the same and this is equally wrong. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
2012-09-03 22:05:10 +08:00
bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
{
bool ret = __skip_sstep(auprobe, regs);
if (ret && (regs->flags & X86_EFLAGS_TF))
send_sig(SIGTRAP, current, 0);
return ret;
}
uretprobes/x86: Hijack return address Hijack the return address and replace it with a trampoline address. Signed-off-by: Anton Arapov <anton@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-04 00:00:33 +08:00
unsigned long
arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs)
{
uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() 1. Add the trivial sizeof_long() helper and change other callers of is_ia32_task() to use it. TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). 2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr() and adjust_ret_addr() should be named "nleft". And in fact only the last copy_to_user() in arch_uretprobe_hijack_return_addr() actually needs to inspect the non-zero error code. TODO: adjust_ret_addr() should die. We can always calculate the value we need to write into *regs->sp, just UPROBE_FIX_CALL should record insn->length. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 23:16:10 +08:00
int rasize = sizeof_long(), nleft;
uretprobes/x86: Hijack return address Hijack the return address and replace it with a trampoline address. Signed-off-by: Anton Arapov <anton@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-04 00:00:33 +08:00
unsigned long orig_ret_vaddr = 0; /* clear high bits for 32-bit apps */
uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() 1. Add the trivial sizeof_long() helper and change other callers of is_ia32_task() to use it. TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). 2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr() and adjust_ret_addr() should be named "nleft". And in fact only the last copy_to_user() in arch_uretprobe_hijack_return_addr() actually needs to inspect the non-zero error code. TODO: adjust_ret_addr() should die. We can always calculate the value we need to write into *regs->sp, just UPROBE_FIX_CALL should record insn->length. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 23:16:10 +08:00
if (copy_from_user(&orig_ret_vaddr, (void __user *)regs->sp, rasize))
uretprobes/x86: Hijack return address Hijack the return address and replace it with a trampoline address. Signed-off-by: Anton Arapov <anton@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-04 00:00:33 +08:00
return -1;
/* check whether address has been already hijacked */
if (orig_ret_vaddr == trampoline_vaddr)
return orig_ret_vaddr;
uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() 1. Add the trivial sizeof_long() helper and change other callers of is_ia32_task() to use it. TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). 2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr() and adjust_ret_addr() should be named "nleft". And in fact only the last copy_to_user() in arch_uretprobe_hijack_return_addr() actually needs to inspect the non-zero error code. TODO: adjust_ret_addr() should die. We can always calculate the value we need to write into *regs->sp, just UPROBE_FIX_CALL should record insn->length. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 23:16:10 +08:00
nleft = copy_to_user((void __user *)regs->sp, &trampoline_vaddr, rasize);
if (likely(!nleft))
uretprobes/x86: Hijack return address Hijack the return address and replace it with a trampoline address. Signed-off-by: Anton Arapov <anton@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-04 00:00:33 +08:00
return orig_ret_vaddr;
uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() 1. Add the trivial sizeof_long() helper and change other callers of is_ia32_task() to use it. TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). 2. As Jim pointed out "ncopied" in arch_uretprobe_hijack_return_addr() and adjust_ret_addr() should be named "nleft". And in fact only the last copy_to_user() in arch_uretprobe_hijack_return_addr() actually needs to inspect the non-zero error code. TODO: adjust_ret_addr() should die. We can always calculate the value we need to write into *regs->sp, just UPROBE_FIX_CALL should record insn->length. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
2014-04-06 23:16:10 +08:00
if (nleft != rasize) {
uretprobes/x86: Hijack return address Hijack the return address and replace it with a trampoline address. Signed-off-by: Anton Arapov <anton@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2013-04-04 00:00:33 +08:00
pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, "
"%%ip=%#lx\n", current->pid, regs->sp, regs->ip);
force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
}
return -1;
}
uprobes/x86: Reimplement arch_uretprobe_is_alive() Add the x86 specific version of arch_uretprobe_is_alive() helper. It returns true if the stack frame mangled by prepare_uretprobe() is still on stack. So if it returns false, we know that the probed function has already returned. We add the new return_instance->stack member and change the generic code to initialize it in prepare_uretprobe, but it should be equally useful for other architectures. TODO: this assumes that the probed application can't use multiple stacks (say sigaltstack). We will try to improve this logic later. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134018.GA4766@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:18 +08:00
uprobes: Add the "enum rp_check ctx" arg to arch_uretprobe_is_alive() arch/x86 doesn't care (so far), but as Pratyush Anand pointed out other architectures might want why arch_uretprobe_is_alive() was called and use different checks depending on the context. Add the new argument to distinguish 2 callers. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134026.GA4779@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:26 +08:00
bool arch_uretprobe_is_alive(struct return_instance *ret, enum rp_check ctx,
struct pt_regs *regs)
uprobes/x86: Reimplement arch_uretprobe_is_alive() Add the x86 specific version of arch_uretprobe_is_alive() helper. It returns true if the stack frame mangled by prepare_uretprobe() is still on stack. So if it returns false, we know that the probed function has already returned. We add the new return_instance->stack member and change the generic code to initialize it in prepare_uretprobe, but it should be equally useful for other architectures. TODO: this assumes that the probed application can't use multiple stacks (say sigaltstack). We will try to improve this logic later. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134018.GA4766@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:18 +08:00
{
uprobes/x86: Make arch_uretprobe_is_alive(RP_CHECK_CALL) more clever The previous change documents that cleanup_return_instances() can't always detect the dead frames, the stack can grow. But there is one special case which imho worth fixing: arch_uretprobe_is_alive() can return true when the stack didn't actually grow, but the next "call" insn uses the already invalidated frame. Test-case: #include <stdio.h> #include <setjmp.h> jmp_buf jmp; int nr = 1024; void func_2(void) { if (--nr == 0) return; longjmp(jmp, 1); } void func_1(void) { setjmp(jmp); func_2(); } int main(void) { func_1(); return 0; } If you ret-probe func_1() and func_2() prepare_uretprobe() hits the MAX_URETPROBE_DEPTH limit and "return" from func_2() is not reported. When we know that the new call is not chained, we can do the more strict check. In this case "sp" points to the new ret-addr, so every frame which uses the same "sp" must be dead. The only complication is that arch_uretprobe_is_alive() needs to know was it chained or not, so we add the new RP_CHECK_CHAIN_CALL enum and change prepare_uretprobe() to pass RP_CHECK_CALL only if !chained. Note: arch_uretprobe_is_alive() could also re-read *sp and check if this word is still trampoline_vaddr. This could obviously improve the logic, but I would like to avoid another copy_from_user() especially in the case when we can't avoid the false "alive == T" positives. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134028.GA4786@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:28 +08:00
if (ctx == RP_CHECK_CALL) /* sp was just decremented by "call" insn */
return regs->sp < ret->stack;
else
return regs->sp <= ret->stack;
uprobes/x86: Reimplement arch_uretprobe_is_alive() Add the x86 specific version of arch_uretprobe_is_alive() helper. It returns true if the stack frame mangled by prepare_uretprobe() is still on stack. So if it returns false, we know that the probed function has already returned. We add the new return_instance->stack member and change the generic code to initialize it in prepare_uretprobe, but it should be equally useful for other architectures. TODO: this assumes that the probed application can't use multiple stacks (say sigaltstack). We will try to improve this logic later. Tested-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Anton Arapov <arapov@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150721134018.GA4766@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-21 21:40:18 +08:00
}
Reference in New Issue Copy Permalink