2017-11-03 18:28:30 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2016-10-19 10:28:23 +08:00
|
|
|
/*
|
|
|
|
* mtu3.h - MediaTek USB3 DRD header
|
|
|
|
*
|
|
|
|
* Copyright (C) 2016 MediaTek Inc.
|
|
|
|
*
|
|
|
|
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __MTU3_H__
|
|
|
|
#define __MTU3_H__
|
|
|
|
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/dmapool.h>
|
2016-10-19 10:28:26 +08:00
|
|
|
#include <linux/extcon.h>
|
2016-10-19 10:28:23 +08:00
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/phy/phy.h>
|
|
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include <linux/usb/otg.h>
|
|
|
|
|
|
|
|
struct mtu3;
|
|
|
|
struct mtu3_ep;
|
|
|
|
struct mtu3_request;
|
|
|
|
|
|
|
|
#include "mtu3_hw_regs.h"
|
|
|
|
#include "mtu3_qmu.h"
|
|
|
|
|
|
|
|
#define MU3D_EP_TXCR0(epnum) (U3D_TX1CSR0 + (((epnum) - 1) * 0x10))
|
|
|
|
#define MU3D_EP_TXCR1(epnum) (U3D_TX1CSR1 + (((epnum) - 1) * 0x10))
|
|
|
|
#define MU3D_EP_TXCR2(epnum) (U3D_TX1CSR2 + (((epnum) - 1) * 0x10))
|
|
|
|
|
|
|
|
#define MU3D_EP_RXCR0(epnum) (U3D_RX1CSR0 + (((epnum) - 1) * 0x10))
|
|
|
|
#define MU3D_EP_RXCR1(epnum) (U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
|
|
|
|
#define MU3D_EP_RXCR2(epnum) (U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
|
|
|
|
|
2017-10-13 17:10:41 +08:00
|
|
|
#define USB_QMU_TQHIAR(epnum) (U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
|
|
|
|
#define USB_QMU_RQHIAR(epnum) (U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
|
|
|
|
|
2016-10-19 10:28:23 +08:00
|
|
|
#define USB_QMU_RQCSR(epnum) (U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
|
|
|
|
#define USB_QMU_RQSAR(epnum) (U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
|
|
|
|
#define USB_QMU_RQCPR(epnum) (U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
|
|
|
|
|
|
|
|
#define USB_QMU_TQCSR(epnum) (U3D_TXQCSR1 + (((epnum) - 1) * 0x10))
|
|
|
|
#define USB_QMU_TQSAR(epnum) (U3D_TXQSAR1 + (((epnum) - 1) * 0x10))
|
|
|
|
#define USB_QMU_TQCPR(epnum) (U3D_TXQCPR1 + (((epnum) - 1) * 0x10))
|
|
|
|
|
2016-10-19 10:28:24 +08:00
|
|
|
#define SSUSB_U3_CTRL(p) (U3D_SSUSB_U3_CTRL_0P + ((p) * 0x08))
|
2016-10-19 10:28:23 +08:00
|
|
|
#define SSUSB_U2_CTRL(p) (U3D_SSUSB_U2_CTRL_0P + ((p) * 0x08))
|
|
|
|
|
|
|
|
#define MTU3_DRIVER_NAME "mtu3"
|
|
|
|
#define DMA_ADDR_INVALID (~(dma_addr_t)0)
|
|
|
|
|
|
|
|
#define MTU3_EP_ENABLED BIT(0)
|
|
|
|
#define MTU3_EP_STALL BIT(1)
|
|
|
|
#define MTU3_EP_WEDGE BIT(2)
|
|
|
|
#define MTU3_EP_BUSY BIT(3)
|
|
|
|
|
2016-10-19 10:28:24 +08:00
|
|
|
#define MTU3_U3_IP_SLOT_DEFAULT 2
|
2016-10-19 10:28:23 +08:00
|
|
|
#define MTU3_U2_IP_SLOT_DEFAULT 1
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Normally the device works on HS or SS, to simplify fifo management,
|
|
|
|
* devide fifo into some 512B parts, use bitmap to manage it; And
|
|
|
|
* 128 bits size of bitmap is large enough, that means it can manage
|
|
|
|
* up to 64KB fifo size.
|
|
|
|
* NOTE: MTU3_EP_FIFO_UNIT should be power of two
|
|
|
|
*/
|
|
|
|
#define MTU3_EP_FIFO_UNIT (1 << 9)
|
|
|
|
#define MTU3_FIFO_BIT_SIZE 128
|
|
|
|
#define MTU3_U2_IP_EP0_FIFO_SIZE 64
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Maximum size of ep0 response buffer for ch9 requests,
|
|
|
|
* the SET_SEL request uses 6 so far, and GET_STATUS is 2
|
|
|
|
*/
|
|
|
|
#define EP0_RESPONSE_BUF 6
|
|
|
|
|
|
|
|
/* device operated link and speed got from DEVICE_CONF register */
|
|
|
|
enum mtu3_speed {
|
|
|
|
MTU3_SPEED_INACTIVE = 0,
|
|
|
|
MTU3_SPEED_FULL = 1,
|
|
|
|
MTU3_SPEED_HIGH = 3,
|
2016-10-19 10:28:24 +08:00
|
|
|
MTU3_SPEED_SUPER = 4,
|
2017-10-13 17:10:43 +08:00
|
|
|
MTU3_SPEED_SUPER_PLUS = 5,
|
2016-10-19 10:28:23 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @MU3D_EP0_STATE_SETUP: waits for SETUP or received a SETUP
|
|
|
|
* without data stage.
|
|
|
|
* @MU3D_EP0_STATE_TX: IN data stage
|
|
|
|
* @MU3D_EP0_STATE_RX: OUT data stage
|
|
|
|
* @MU3D_EP0_STATE_TX_END: the last IN data is transferred, and
|
|
|
|
* waits for its completion interrupt
|
|
|
|
* @MU3D_EP0_STATE_STALL: ep0 is in stall status, will be auto-cleared
|
|
|
|
* after receives a SETUP.
|
|
|
|
*/
|
|
|
|
enum mtu3_g_ep0_state {
|
|
|
|
MU3D_EP0_STATE_SETUP = 1,
|
|
|
|
MU3D_EP0_STATE_TX,
|
|
|
|
MU3D_EP0_STATE_RX,
|
|
|
|
MU3D_EP0_STATE_TX_END,
|
|
|
|
MU3D_EP0_STATE_STALL,
|
|
|
|
};
|
|
|
|
|
2017-10-13 17:10:42 +08:00
|
|
|
/**
|
|
|
|
* MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
|
|
|
|
* by IDPIN signal.
|
|
|
|
* MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
|
|
|
|
* IDPIN signal.
|
|
|
|
* MTU3_DR_FORCE_DEVICE: force to enter peripheral mode.
|
|
|
|
*/
|
|
|
|
enum mtu3_dr_force_mode {
|
|
|
|
MTU3_DR_FORCE_NONE = 0,
|
|
|
|
MTU3_DR_FORCE_HOST,
|
|
|
|
MTU3_DR_FORCE_DEVICE,
|
|
|
|
};
|
|
|
|
|
2016-10-19 10:28:23 +08:00
|
|
|
/**
|
|
|
|
* @base: the base address of fifo
|
|
|
|
* @limit: the bitmap size in bits
|
|
|
|
* @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT
|
|
|
|
*/
|
|
|
|
struct mtu3_fifo_info {
|
|
|
|
u32 base;
|
|
|
|
u32 limit;
|
|
|
|
DECLARE_BITMAP(bitmap, MTU3_FIFO_BIT_SIZE);
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* General Purpose Descriptor (GPD):
|
|
|
|
* The format of TX GPD is a little different from RX one.
|
|
|
|
* And the size of GPD is 16 bytes.
|
|
|
|
*
|
|
|
|
* @flag:
|
|
|
|
* bit0: Hardware Own (HWO)
|
|
|
|
* bit1: Buffer Descriptor Present (BDP), always 0, BD is not supported
|
|
|
|
* bit2: Bypass (BPS), 1: HW skips this GPD if HWO = 1
|
|
|
|
* bit7: Interrupt On Completion (IOC)
|
|
|
|
* @chksum: This is used to validate the contents of this GPD;
|
|
|
|
* If TXQ_CS_EN / RXQ_CS_EN bit is set, an interrupt is issued
|
|
|
|
* when checksum validation fails;
|
|
|
|
* Checksum value is calculated over the 16 bytes of the GPD by default;
|
|
|
|
* @data_buf_len (RX ONLY): This value indicates the length of
|
|
|
|
* the assigned data buffer
|
2017-10-13 17:10:41 +08:00
|
|
|
* @tx_ext_addr (TX ONLY): [3:0] are 4 extension bits of @buffer,
|
|
|
|
* [7:4] are 4 extension bits of @next_gpd
|
2016-10-19 10:28:23 +08:00
|
|
|
* @next_gpd: Physical address of the next GPD
|
|
|
|
* @buffer: Physical address of the data buffer
|
|
|
|
* @buf_len:
|
|
|
|
* (TX): This value indicates the length of the assigned data buffer
|
|
|
|
* (RX): The total length of data received
|
|
|
|
* @ext_len: reserved
|
2017-10-13 17:10:41 +08:00
|
|
|
* @rx_ext_addr(RX ONLY): [3:0] are 4 extension bits of @buffer,
|
|
|
|
* [7:4] are 4 extension bits of @next_gpd
|
2016-10-19 10:28:23 +08:00
|
|
|
* @ext_flag:
|
|
|
|
* bit5 (TX ONLY): Zero Length Packet (ZLP),
|
|
|
|
*/
|
|
|
|
struct qmu_gpd {
|
|
|
|
__u8 flag;
|
|
|
|
__u8 chksum;
|
2017-10-13 17:10:41 +08:00
|
|
|
union {
|
|
|
|
__le16 data_buf_len;
|
|
|
|
__le16 tx_ext_addr;
|
|
|
|
};
|
2016-10-19 10:28:23 +08:00
|
|
|
__le32 next_gpd;
|
|
|
|
__le32 buffer;
|
|
|
|
__le16 buf_len;
|
2017-10-13 17:10:41 +08:00
|
|
|
union {
|
|
|
|
__u8 ext_len;
|
|
|
|
__u8 rx_ext_addr;
|
|
|
|
};
|
2016-10-19 10:28:23 +08:00
|
|
|
__u8 ext_flag;
|
|
|
|
} __packed;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* dma: physical base address of GPD segment
|
|
|
|
* start: virtual base address of GPD segment
|
|
|
|
* end: the last GPD element
|
|
|
|
* enqueue: the first empty GPD to use
|
|
|
|
* dequeue: the first completed GPD serviced by ISR
|
|
|
|
* NOTE: the size of GPD ring should be >= 2
|
|
|
|
*/
|
|
|
|
struct mtu3_gpd_ring {
|
|
|
|
dma_addr_t dma;
|
|
|
|
struct qmu_gpd *start;
|
|
|
|
struct qmu_gpd *end;
|
|
|
|
struct qmu_gpd *enqueue;
|
|
|
|
struct qmu_gpd *dequeue;
|
|
|
|
};
|
2016-10-19 10:28:26 +08:00
|
|
|
|
|
|
|
/**
|
|
|
|
* @vbus: vbus 5V used by host mode
|
|
|
|
* @edev: external connector used to detect vbus and iddig changes
|
|
|
|
* @vbus_nb: notifier for vbus detection
|
2018-05-23 16:53:20 +08:00
|
|
|
* @vbus_work : work of vbus detection notifier, used to avoid sleep in
|
|
|
|
* notifier callback which is atomic context
|
|
|
|
* @vbus_event : event of vbus detecion notifier
|
|
|
|
* @id_nb : notifier for iddig(idpin) detection
|
|
|
|
* @id_work : work of iddig detection notifier
|
|
|
|
* @id_event : event of iddig detecion notifier
|
2016-10-19 10:28:26 +08:00
|
|
|
* @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
|
|
|
|
* @manual_drd_enabled: it's true when supports dual-role device by debugfs
|
|
|
|
* to switch host/device modes depending on user input.
|
|
|
|
*/
|
|
|
|
struct otg_switch_mtk {
|
|
|
|
struct regulator *vbus;
|
|
|
|
struct extcon_dev *edev;
|
|
|
|
struct notifier_block vbus_nb;
|
2018-05-23 16:53:20 +08:00
|
|
|
struct work_struct vbus_work;
|
|
|
|
unsigned long vbus_event;
|
2016-10-19 10:28:26 +08:00
|
|
|
struct notifier_block id_nb;
|
2018-05-23 16:53:20 +08:00
|
|
|
struct work_struct id_work;
|
|
|
|
unsigned long id_event;
|
2016-10-19 10:28:26 +08:00
|
|
|
bool is_u3_drd;
|
|
|
|
bool manual_drd_enabled;
|
|
|
|
};
|
|
|
|
|
2016-10-19 10:28:25 +08:00
|
|
|
/**
|
|
|
|
* @mac_base: register base address of device MAC, exclude xHCI's
|
2016-10-19 10:28:26 +08:00
|
|
|
* @ippc_base: register base address of IP Power and Clock interface (IPPC)
|
2016-10-19 10:28:25 +08:00
|
|
|
* @vusb33: usb3.3V shared by device/host IP
|
|
|
|
* @sys_clk: system clock of mtu3, shared by device/host IP
|
2017-10-13 17:10:40 +08:00
|
|
|
* @ref_clk: reference clock
|
|
|
|
* @mcu_clk: mcu_bus_ck clock for AHB bus etc
|
|
|
|
* @dma_clk: dma_bus_ck clock for AXI bus etc
|
2016-10-19 10:28:25 +08:00
|
|
|
* @dr_mode: works in which mode:
|
|
|
|
* host only, device only or dual-role mode
|
|
|
|
* @u2_ports: number of usb2.0 host ports
|
|
|
|
* @u3_ports: number of usb3.0 host ports
|
2017-10-13 17:10:38 +08:00
|
|
|
* @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
|
|
|
|
* disable u3port0, bit1==1 to disable u3port1,... etc
|
2016-10-19 10:28:26 +08:00
|
|
|
* @dbgfs_root: only used when supports manual dual-role switch via debugfs
|
2018-01-03 16:53:18 +08:00
|
|
|
* @uwk_en: it's true when supports remote wakeup in host mode
|
|
|
|
* @uwk: syscon including usb wakeup glue layer between SSUSB IP and SPM
|
|
|
|
* @uwk_reg_base: the base address of the wakeup glue layer in @uwk
|
|
|
|
* @uwk_vers: the version of the wakeup glue layer
|
2016-10-19 10:28:25 +08:00
|
|
|
*/
|
|
|
|
struct ssusb_mtk {
|
|
|
|
struct device *dev;
|
|
|
|
struct mtu3 *u3d;
|
|
|
|
void __iomem *mac_base;
|
|
|
|
void __iomem *ippc_base;
|
|
|
|
struct phy **phys;
|
|
|
|
int num_phys;
|
|
|
|
/* common power & clock */
|
|
|
|
struct regulator *vusb33;
|
|
|
|
struct clk *sys_clk;
|
2017-01-18 14:08:23 +08:00
|
|
|
struct clk *ref_clk;
|
2017-10-13 17:10:40 +08:00
|
|
|
struct clk *mcu_clk;
|
|
|
|
struct clk *dma_clk;
|
2016-10-19 10:28:25 +08:00
|
|
|
/* otg */
|
2016-10-19 10:28:26 +08:00
|
|
|
struct otg_switch_mtk otg_switch;
|
2016-10-19 10:28:25 +08:00
|
|
|
enum usb_dr_mode dr_mode;
|
|
|
|
bool is_host;
|
|
|
|
int u2_ports;
|
|
|
|
int u3_ports;
|
2017-10-13 17:10:38 +08:00
|
|
|
int u3p_dis_msk;
|
2016-10-19 10:28:26 +08:00
|
|
|
struct dentry *dbgfs_root;
|
2016-10-19 10:28:25 +08:00
|
|
|
/* usb wakeup for host mode */
|
2018-01-03 16:53:18 +08:00
|
|
|
bool uwk_en;
|
|
|
|
struct regmap *uwk;
|
|
|
|
u32 uwk_reg_base;
|
|
|
|
u32 uwk_vers;
|
2016-10-19 10:28:25 +08:00
|
|
|
};
|
2016-10-19 10:28:23 +08:00
|
|
|
|
|
|
|
/**
|
|
|
|
* @fifo_size: it is (@slot + 1) * @fifo_seg_size
|
|
|
|
* @fifo_seg_size: it is roundup_pow_of_two(@maxp)
|
|
|
|
*/
|
|
|
|
struct mtu3_ep {
|
|
|
|
struct usb_ep ep;
|
|
|
|
char name[12];
|
|
|
|
struct mtu3 *mtu;
|
|
|
|
u8 epnum;
|
|
|
|
u8 type;
|
|
|
|
u8 is_in;
|
|
|
|
u16 maxp;
|
|
|
|
int slot;
|
|
|
|
u32 fifo_size;
|
|
|
|
u32 fifo_addr;
|
|
|
|
u32 fifo_seg_size;
|
|
|
|
struct mtu3_fifo_info *fifo;
|
|
|
|
|
|
|
|
struct list_head req_list;
|
|
|
|
struct mtu3_gpd_ring gpd_ring;
|
2016-10-19 10:28:24 +08:00
|
|
|
const struct usb_ss_ep_comp_descriptor *comp_desc;
|
2016-10-19 10:28:23 +08:00
|
|
|
const struct usb_endpoint_descriptor *desc;
|
|
|
|
|
|
|
|
int flags;
|
|
|
|
u8 wedged;
|
|
|
|
u8 busy;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mtu3_request {
|
|
|
|
struct usb_request request;
|
|
|
|
struct list_head list;
|
|
|
|
struct mtu3_ep *mep;
|
|
|
|
struct mtu3 *mtu;
|
|
|
|
struct qmu_gpd *gpd;
|
|
|
|
int epnum;
|
|
|
|
};
|
|
|
|
|
2016-10-19 10:28:25 +08:00
|
|
|
static inline struct ssusb_mtk *dev_to_ssusb(struct device *dev)
|
|
|
|
{
|
|
|
|
return dev_get_drvdata(dev);
|
|
|
|
}
|
|
|
|
|
2016-10-19 10:28:23 +08:00
|
|
|
/**
|
|
|
|
* struct mtu3 - device driver instance data.
|
2016-10-19 10:28:24 +08:00
|
|
|
* @slot: MTU3_U2_IP_SLOT_DEFAULT for U2 IP only,
|
|
|
|
* MTU3_U3_IP_SLOT_DEFAULT for U3 IP
|
2016-10-19 10:28:23 +08:00
|
|
|
* @may_wakeup: means device's remote wakeup is enabled
|
|
|
|
* @is_self_powered: is reported in device status and the config descriptor
|
2017-07-25 16:10:22 +08:00
|
|
|
* @delayed_status: true when function drivers ask for delayed status
|
2016-10-19 10:28:23 +08:00
|
|
|
* @ep0_req: dummy request used while handling standard USB requests
|
|
|
|
* for GET_STATUS and SET_SEL
|
|
|
|
* @setup_buf: ep0 response buffer for GET_STATUS and SET_SEL requests
|
|
|
|
*/
|
|
|
|
struct mtu3 {
|
|
|
|
spinlock_t lock;
|
2016-10-19 10:28:25 +08:00
|
|
|
struct ssusb_mtk *ssusb;
|
2016-10-19 10:28:23 +08:00
|
|
|
struct device *dev;
|
|
|
|
void __iomem *mac_base;
|
|
|
|
void __iomem *ippc_base;
|
|
|
|
int irq;
|
|
|
|
|
|
|
|
struct mtu3_fifo_info tx_fifo;
|
|
|
|
struct mtu3_fifo_info rx_fifo;
|
|
|
|
|
|
|
|
struct mtu3_ep *ep_array;
|
|
|
|
struct mtu3_ep *in_eps;
|
|
|
|
struct mtu3_ep *out_eps;
|
|
|
|
struct mtu3_ep *ep0;
|
|
|
|
int num_eps;
|
|
|
|
int slot;
|
|
|
|
int active_ep;
|
|
|
|
|
|
|
|
struct dma_pool *qmu_gpd_pool;
|
|
|
|
enum mtu3_g_ep0_state ep0_state;
|
|
|
|
struct usb_gadget g; /* the gadget */
|
|
|
|
struct usb_gadget_driver *gadget_driver;
|
|
|
|
struct mtu3_request ep0_req;
|
|
|
|
u8 setup_buf[EP0_RESPONSE_BUF];
|
2016-10-19 10:28:24 +08:00
|
|
|
u32 max_speed;
|
2016-10-19 10:28:23 +08:00
|
|
|
|
|
|
|
unsigned is_active:1;
|
|
|
|
unsigned may_wakeup:1;
|
|
|
|
unsigned is_self_powered:1;
|
|
|
|
unsigned test_mode:1;
|
|
|
|
unsigned softconnect:1;
|
2016-10-19 10:28:24 +08:00
|
|
|
unsigned u1_enable:1;
|
|
|
|
unsigned u2_enable:1;
|
|
|
|
unsigned is_u3_ip:1;
|
2017-07-25 16:10:22 +08:00
|
|
|
unsigned delayed_status:1;
|
2016-10-19 10:28:23 +08:00
|
|
|
|
|
|
|
u8 address;
|
|
|
|
u8 test_mode_nr;
|
|
|
|
u32 hw_version;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct mtu3 *gadget_to_mtu3(struct usb_gadget *g)
|
|
|
|
{
|
|
|
|
return container_of(g, struct mtu3, g);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline int is_first_entry(const struct list_head *list,
|
|
|
|
const struct list_head *head)
|
|
|
|
{
|
|
|
|
return list_is_last(head, list);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct mtu3_request *to_mtu3_request(struct usb_request *req)
|
|
|
|
{
|
|
|
|
return req ? container_of(req, struct mtu3_request, request) : NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct mtu3_ep *to_mtu3_ep(struct usb_ep *ep)
|
|
|
|
{
|
|
|
|
return ep ? container_of(ep, struct mtu3_ep, ep) : NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct mtu3_request *next_request(struct mtu3_ep *mep)
|
|
|
|
{
|
2017-05-21 01:05:31 +08:00
|
|
|
return list_first_entry_or_null(&mep->req_list, struct mtu3_request,
|
|
|
|
list);
|
2016-10-19 10:28:23 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mtu3_writel(void __iomem *base, u32 offset, u32 data)
|
|
|
|
{
|
|
|
|
writel(data, base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 mtu3_readl(void __iomem *base, u32 offset)
|
|
|
|
{
|
|
|
|
return readl(base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mtu3_setbits(void __iomem *base, u32 offset, u32 bits)
|
|
|
|
{
|
|
|
|
void __iomem *addr = base + offset;
|
|
|
|
u32 tmp = readl(addr);
|
|
|
|
|
|
|
|
writel((tmp | (bits)), addr);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void mtu3_clrbits(void __iomem *base, u32 offset, u32 bits)
|
|
|
|
{
|
|
|
|
void __iomem *addr = base + offset;
|
|
|
|
u32 tmp = readl(addr);
|
|
|
|
|
|
|
|
writel((tmp & ~(bits)), addr);
|
|
|
|
}
|
|
|
|
|
2016-10-19 10:28:25 +08:00
|
|
|
int ssusb_check_clocks(struct ssusb_mtk *ssusb, u32 ex_clks);
|
2016-10-19 10:28:23 +08:00
|
|
|
struct usb_request *mtu3_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
|
|
|
|
void mtu3_free_request(struct usb_ep *ep, struct usb_request *req);
|
|
|
|
void mtu3_req_complete(struct mtu3_ep *mep,
|
|
|
|
struct usb_request *req, int status);
|
|
|
|
|
|
|
|
int mtu3_config_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
|
|
|
|
int interval, int burst, int mult);
|
|
|
|
void mtu3_deconfig_ep(struct mtu3 *mtu, struct mtu3_ep *mep);
|
|
|
|
void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set);
|
|
|
|
void mtu3_ep0_setup(struct mtu3 *mtu);
|
|
|
|
void mtu3_start(struct mtu3 *mtu);
|
|
|
|
void mtu3_stop(struct mtu3 *mtu);
|
2016-10-19 10:28:24 +08:00
|
|
|
void mtu3_dev_on_off(struct mtu3 *mtu, int is_on);
|
2016-10-19 10:28:23 +08:00
|
|
|
|
|
|
|
int mtu3_gadget_setup(struct mtu3 *mtu);
|
|
|
|
void mtu3_gadget_cleanup(struct mtu3 *mtu);
|
|
|
|
void mtu3_gadget_reset(struct mtu3 *mtu);
|
|
|
|
void mtu3_gadget_suspend(struct mtu3 *mtu);
|
|
|
|
void mtu3_gadget_resume(struct mtu3 *mtu);
|
|
|
|
void mtu3_gadget_disconnect(struct mtu3 *mtu);
|
|
|
|
|
|
|
|
irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu);
|
|
|
|
extern const struct usb_ep_ops mtu3_ep0_ops;
|
|
|
|
|
|
|
|
#endif
|