linux/arch/arm/boot/dts/vf500.dtsi

98 lines
2.9 KiB
Plaintext
Raw Normal View History

/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include "vfxxx.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
a5_cpu: cpu@0 {
compatible = "arm,cortex-a5";
device_type = "cpu";
reg = <0x0>;
};
};
soc {
aips-bus@40000000 {
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-02 06:41:29 +08:00
interrupt-parent = <&intc>;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
global_timer: timer@40002200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-02 06:41:29 +08:00
interrupt-parent = <&intc>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
aips-bus@40080000 {
pmu@40089000 {
compatible = "arm,cortex-a5-pmu";
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&a5_cpu>;
reg = <0x40089000 0x1000>;
};
};
};
};
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-02 06:41:29 +08:00
&mscm_ir {
interrupt-parent = <&intc>;
};
&wdoga5 {
status = "okay";
};