linux/drivers/firmware/tegra/bpmp.c

881 lines
19 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/clk/tegra.h>
#include <linux/genalloc.h>
#include <linux/mailbox_client.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/semaphore.h>
#include <linux/sched/clock.h>
#include <soc/tegra/bpmp.h>
#include <soc/tegra/bpmp-abi.h>
#include <soc/tegra/ivc.h>
#include "bpmp-private.h"
#define MSG_ACK BIT(0)
#define MSG_RING BIT(1)
#define TAG_SZ 32
static inline struct tegra_bpmp *
mbox_client_to_bpmp(struct mbox_client *client)
{
return container_of(client, struct tegra_bpmp, mbox.client);
}
static inline const struct tegra_bpmp_ops *
channel_to_ops(struct tegra_bpmp_channel *channel)
{
struct tegra_bpmp *bpmp = channel->bpmp;
return bpmp->soc->ops;
}
struct tegra_bpmp *tegra_bpmp_get(struct device *dev)
{
struct platform_device *pdev;
struct tegra_bpmp *bpmp;
struct device_node *np;
np = of_parse_phandle(dev->of_node, "nvidia,bpmp", 0);
if (!np)
return ERR_PTR(-ENOENT);
pdev = of_find_device_by_node(np);
if (!pdev) {
bpmp = ERR_PTR(-ENODEV);
goto put;
}
bpmp = platform_get_drvdata(pdev);
if (!bpmp) {
bpmp = ERR_PTR(-EPROBE_DEFER);
put_device(&pdev->dev);
goto put;
}
put:
of_node_put(np);
return bpmp;
}
EXPORT_SYMBOL_GPL(tegra_bpmp_get);
void tegra_bpmp_put(struct tegra_bpmp *bpmp)
{
if (bpmp)
put_device(bpmp->dev);
}
EXPORT_SYMBOL_GPL(tegra_bpmp_put);
static int
tegra_bpmp_channel_get_thread_index(struct tegra_bpmp_channel *channel)
{
struct tegra_bpmp *bpmp = channel->bpmp;
unsigned int count;
int index;
count = bpmp->soc->channels.thread.count;
index = channel - channel->bpmp->threaded_channels;
if (index < 0 || index >= count)
return -EINVAL;
return index;
}
static bool tegra_bpmp_message_valid(const struct tegra_bpmp_message *msg)
{
return (msg->tx.size <= MSG_DATA_MIN_SZ) &&
(msg->rx.size <= MSG_DATA_MIN_SZ) &&
(msg->tx.size == 0 || msg->tx.data) &&
(msg->rx.size == 0 || msg->rx.data);
}
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
static bool tegra_bpmp_is_response_ready(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->is_response_ready(channel);
}
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
static bool tegra_bpmp_is_request_ready(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->is_request_ready(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static int tegra_bpmp_wait_response(struct tegra_bpmp_channel *channel)
{
unsigned long timeout = channel->bpmp->soc->channels.cpu_tx.timeout;
ktime_t end;
end = ktime_add_us(ktime_get(), timeout);
do {
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
if (tegra_bpmp_is_response_ready(channel))
return 0;
} while (ktime_before(ktime_get(), end));
return -ETIMEDOUT;
}
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
static int tegra_bpmp_ack_response(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->ack_response(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static int tegra_bpmp_ack_request(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->ack_request(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static bool
tegra_bpmp_is_request_channel_free(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->is_request_channel_free(channel);
}
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
static bool
tegra_bpmp_is_response_channel_free(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->is_response_channel_free(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static int
tegra_bpmp_wait_request_channel_free(struct tegra_bpmp_channel *channel)
{
unsigned long timeout = channel->bpmp->soc->channels.cpu_tx.timeout;
ktime_t start, now;
start = ns_to_ktime(local_clock());
do {
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
if (tegra_bpmp_is_request_channel_free(channel))
return 0;
now = ns_to_ktime(local_clock());
} while (ktime_us_delta(now, start) < timeout);
return -ETIMEDOUT;
}
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
static int tegra_bpmp_post_request(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->post_request(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static int tegra_bpmp_post_response(struct tegra_bpmp_channel *channel)
{
const struct tegra_bpmp_ops *ops = channel_to_ops(channel);
return ops->post_response(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static int tegra_bpmp_ring_doorbell(struct tegra_bpmp *bpmp)
{
return bpmp->soc->ops->ring_doorbell(bpmp);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
}
static ssize_t __tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
void *data, size_t size, int *ret)
{
int err;
if (data && size > 0)
memcpy(data, channel->ib->data, size);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_ack_response(channel);
if (err < 0)
return err;
*ret = channel->ib->code;
return 0;
}
static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
void *data, size_t size, int *ret)
{
struct tegra_bpmp *bpmp = channel->bpmp;
unsigned long flags;
ssize_t err;
int index;
index = tegra_bpmp_channel_get_thread_index(channel);
if (index < 0) {
err = index;
goto unlock;
}
spin_lock_irqsave(&bpmp->lock, flags);
err = __tegra_bpmp_channel_read(channel, data, size, ret);
clear_bit(index, bpmp->threaded.allocated);
spin_unlock_irqrestore(&bpmp->lock, flags);
unlock:
up(&bpmp->threaded.lock);
return err;
}
static ssize_t __tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
unsigned int mrq, unsigned long flags,
const void *data, size_t size)
{
channel->ob->code = mrq;
channel->ob->flags = flags;
if (data && size > 0)
memcpy(channel->ob->data, data, size);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
return tegra_bpmp_post_request(channel);
}
static struct tegra_bpmp_channel *
tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq,
const void *data, size_t size)
{
unsigned long timeout = bpmp->soc->channels.thread.timeout;
unsigned int count = bpmp->soc->channels.thread.count;
struct tegra_bpmp_channel *channel;
unsigned long flags;
unsigned int index;
int err;
err = down_timeout(&bpmp->threaded.lock, usecs_to_jiffies(timeout));
if (err < 0)
return ERR_PTR(err);
spin_lock_irqsave(&bpmp->lock, flags);
index = find_first_zero_bit(bpmp->threaded.allocated, count);
if (index == count) {
err = -EBUSY;
goto unlock;
}
channel = &bpmp->threaded_channels[index];
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
if (!tegra_bpmp_is_request_channel_free(channel)) {
err = -EBUSY;
goto unlock;
}
set_bit(index, bpmp->threaded.allocated);
err = __tegra_bpmp_channel_write(channel, mrq, MSG_ACK | MSG_RING,
data, size);
if (err < 0)
goto clear_allocated;
set_bit(index, bpmp->threaded.busy);
spin_unlock_irqrestore(&bpmp->lock, flags);
return channel;
clear_allocated:
clear_bit(index, bpmp->threaded.allocated);
unlock:
spin_unlock_irqrestore(&bpmp->lock, flags);
up(&bpmp->threaded.lock);
return ERR_PTR(err);
}
static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
unsigned int mrq, unsigned long flags,
const void *data, size_t size)
{
int err;
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_wait_request_channel_free(channel);
if (err < 0)
return err;
return __tegra_bpmp_channel_write(channel, mrq, flags, data, size);
}
int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp,
struct tegra_bpmp_message *msg)
{
struct tegra_bpmp_channel *channel;
int err;
if (WARN_ON(!irqs_disabled()))
return -EPERM;
if (!tegra_bpmp_message_valid(msg))
return -EINVAL;
channel = bpmp->tx_channel;
spin_lock(&bpmp->atomic_tx_lock);
err = tegra_bpmp_channel_write(channel, msg->mrq, MSG_ACK,
msg->tx.data, msg->tx.size);
if (err < 0) {
spin_unlock(&bpmp->atomic_tx_lock);
return err;
}
spin_unlock(&bpmp->atomic_tx_lock);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_ring_doorbell(bpmp);
if (err < 0)
return err;
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_wait_response(channel);
if (err < 0)
return err;
return __tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
&msg->rx.ret);
}
EXPORT_SYMBOL_GPL(tegra_bpmp_transfer_atomic);
int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
struct tegra_bpmp_message *msg)
{
struct tegra_bpmp_channel *channel;
unsigned long timeout;
int err;
if (WARN_ON(irqs_disabled()))
return -EPERM;
if (!tegra_bpmp_message_valid(msg))
return -EINVAL;
channel = tegra_bpmp_write_threaded(bpmp, msg->mrq, msg->tx.data,
msg->tx.size);
if (IS_ERR(channel))
return PTR_ERR(channel);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_ring_doorbell(bpmp);
if (err < 0)
return err;
timeout = usecs_to_jiffies(bpmp->soc->channels.thread.timeout);
err = wait_for_completion_timeout(&channel->completion, timeout);
if (err == 0)
return -ETIMEDOUT;
return tegra_bpmp_channel_read(channel, msg->rx.data, msg->rx.size,
&msg->rx.ret);
}
EXPORT_SYMBOL_GPL(tegra_bpmp_transfer);
static struct tegra_bpmp_mrq *tegra_bpmp_find_mrq(struct tegra_bpmp *bpmp,
unsigned int mrq)
{
struct tegra_bpmp_mrq *entry;
list_for_each_entry(entry, &bpmp->mrqs, list)
if (entry->mrq == mrq)
return entry;
return NULL;
}
void tegra_bpmp_mrq_return(struct tegra_bpmp_channel *channel, int code,
const void *data, size_t size)
{
unsigned long flags = channel->ib->flags;
struct tegra_bpmp *bpmp = channel->bpmp;
int err;
if (WARN_ON(size > MSG_DATA_MIN_SZ))
return;
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_ack_request(channel);
if (WARN_ON(err < 0))
return;
if ((flags & MSG_ACK) == 0)
return;
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
if (WARN_ON(!tegra_bpmp_is_response_channel_free(channel)))
return;
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
channel->ob->code = code;
if (data && size > 0)
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
memcpy(channel->ob->data, data, size);
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_post_response(channel);
if (WARN_ON(err < 0))
return;
if (flags & MSG_RING) {
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
err = tegra_bpmp_ring_doorbell(bpmp);
if (WARN_ON(err < 0))
return;
}
}
EXPORT_SYMBOL_GPL(tegra_bpmp_mrq_return);
static void tegra_bpmp_handle_mrq(struct tegra_bpmp *bpmp,
unsigned int mrq,
struct tegra_bpmp_channel *channel)
{
struct tegra_bpmp_mrq *entry;
u32 zero = 0;
spin_lock(&bpmp->lock);
entry = tegra_bpmp_find_mrq(bpmp, mrq);
if (!entry) {
spin_unlock(&bpmp->lock);
tegra_bpmp_mrq_return(channel, -EINVAL, &zero, sizeof(zero));
return;
}
entry->handler(mrq, channel, entry->data);
spin_unlock(&bpmp->lock);
}
int tegra_bpmp_request_mrq(struct tegra_bpmp *bpmp, unsigned int mrq,
tegra_bpmp_mrq_handler_t handler, void *data)
{
struct tegra_bpmp_mrq *entry;
unsigned long flags;
if (!handler)
return -EINVAL;
entry = devm_kzalloc(bpmp->dev, sizeof(*entry), GFP_KERNEL);
if (!entry)
return -ENOMEM;
spin_lock_irqsave(&bpmp->lock, flags);
entry->mrq = mrq;
entry->handler = handler;
entry->data = data;
list_add(&entry->list, &bpmp->mrqs);
spin_unlock_irqrestore(&bpmp->lock, flags);
return 0;
}
EXPORT_SYMBOL_GPL(tegra_bpmp_request_mrq);
void tegra_bpmp_free_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, void *data)
{
struct tegra_bpmp_mrq *entry;
unsigned long flags;
spin_lock_irqsave(&bpmp->lock, flags);
entry = tegra_bpmp_find_mrq(bpmp, mrq);
if (!entry)
goto unlock;
list_del(&entry->list);
devm_kfree(bpmp->dev, entry);
unlock:
spin_unlock_irqrestore(&bpmp->lock, flags);
}
EXPORT_SYMBOL_GPL(tegra_bpmp_free_mrq);
bool tegra_bpmp_mrq_is_supported(struct tegra_bpmp *bpmp, unsigned int mrq)
{
struct mrq_query_abi_request req = { .mrq = cpu_to_le32(mrq) };
struct mrq_query_abi_response resp;
struct tegra_bpmp_message msg = {
.mrq = MRQ_QUERY_ABI,
.tx = {
.data = &req,
.size = sizeof(req),
},
.rx = {
.data = &resp,
.size = sizeof(resp),
},
};
int ret;
ret = tegra_bpmp_transfer(bpmp, &msg);
if (ret || msg.rx.ret)
return false;
return resp.status == 0;
}
EXPORT_SYMBOL_GPL(tegra_bpmp_mrq_is_supported);
static void tegra_bpmp_mrq_handle_ping(unsigned int mrq,
struct tegra_bpmp_channel *channel,
void *data)
{
struct mrq_ping_request *request;
struct mrq_ping_response response;
request = (struct mrq_ping_request *)channel->ib->data;
memset(&response, 0, sizeof(response));
response.reply = request->challenge << 1;
tegra_bpmp_mrq_return(channel, 0, &response, sizeof(response));
}
static int tegra_bpmp_ping(struct tegra_bpmp *bpmp)
{
struct mrq_ping_response response;
struct mrq_ping_request request;
struct tegra_bpmp_message msg;
unsigned long flags;
ktime_t start, end;
int err;
memset(&request, 0, sizeof(request));
request.challenge = 1;
memset(&response, 0, sizeof(response));
memset(&msg, 0, sizeof(msg));
msg.mrq = MRQ_PING;
msg.tx.data = &request;
msg.tx.size = sizeof(request);
msg.rx.data = &response;
msg.rx.size = sizeof(response);
local_irq_save(flags);
start = ktime_get();
err = tegra_bpmp_transfer_atomic(bpmp, &msg);
end = ktime_get();
local_irq_restore(flags);
if (!err)
dev_dbg(bpmp->dev,
"ping ok: challenge: %u, response: %u, time: %lld\n",
request.challenge, response.reply,
ktime_to_us(ktime_sub(end, start)));
return err;
}
/* deprecated version of tag query */
static int tegra_bpmp_get_firmware_tag_old(struct tegra_bpmp *bpmp, char *tag,
size_t size)
{
struct mrq_query_tag_request request;
struct tegra_bpmp_message msg;
unsigned long flags;
dma_addr_t phys;
void *virt;
int err;
if (size != TAG_SZ)
return -EINVAL;
virt = dma_alloc_coherent(bpmp->dev, TAG_SZ, &phys,
GFP_KERNEL | GFP_DMA32);
if (!virt)
return -ENOMEM;
memset(&request, 0, sizeof(request));
request.addr = phys;
memset(&msg, 0, sizeof(msg));
msg.mrq = MRQ_QUERY_TAG;
msg.tx.data = &request;
msg.tx.size = sizeof(request);
local_irq_save(flags);
err = tegra_bpmp_transfer_atomic(bpmp, &msg);
local_irq_restore(flags);
if (err == 0)
memcpy(tag, virt, TAG_SZ);
dma_free_coherent(bpmp->dev, TAG_SZ, virt, phys);
return err;
}
static int tegra_bpmp_get_firmware_tag(struct tegra_bpmp *bpmp, char *tag,
size_t size)
{
if (tegra_bpmp_mrq_is_supported(bpmp, MRQ_QUERY_FW_TAG)) {
struct mrq_query_fw_tag_response resp;
struct tegra_bpmp_message msg = {
.mrq = MRQ_QUERY_FW_TAG,
.rx = {
.data = &resp,
.size = sizeof(resp),
},
};
int err;
if (size != sizeof(resp.tag))
return -EINVAL;
err = tegra_bpmp_transfer(bpmp, &msg);
if (err)
return err;
if (msg.rx.ret < 0)
return -EINVAL;
memcpy(tag, resp.tag, sizeof(resp.tag));
return 0;
}
return tegra_bpmp_get_firmware_tag_old(bpmp, tag, size);
}
static void tegra_bpmp_channel_signal(struct tegra_bpmp_channel *channel)
{
unsigned long flags = channel->ob->flags;
if ((flags & MSG_RING) == 0)
return;
complete(&channel->completion);
}
void tegra_bpmp_handle_rx(struct tegra_bpmp *bpmp)
{
struct tegra_bpmp_channel *channel;
unsigned int i, count;
unsigned long *busy;
channel = bpmp->rx_channel;
count = bpmp->soc->channels.thread.count;
busy = bpmp->threaded.busy;
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
if (tegra_bpmp_is_request_ready(channel))
tegra_bpmp_handle_mrq(bpmp, channel->ib->code, channel);
spin_lock(&bpmp->lock);
for_each_set_bit(i, busy, count) {
struct tegra_bpmp_channel *channel;
channel = &bpmp->threaded_channels[i];
firmware: tegra: Reword messaging terminology As a preparatory change to refactor BPMP driver to support other than Tegra186 and Tegra194 chip generations, reword and slightly refactor some of the functions to better match with what is actually happening in the wire-level protocol. The communication with BPMP is essentially a Remote Procedure Call consisting of "request" and "response". Either side (BPMP or CPU) can initiate the communication. The state machine for communication consists of following steps (from Linux point of view): Linux initiating the call: 1) check that channel is free to transmit a request (is_request_channel_free) 2) copy request message payload to shared location 3) post the request in channel (post_request) 4) notify BPMP that channel state has been updated (ring_doorbell) 5) wait for response (is_response_ready) 6) copy response message payload from shared location 7) acknowledge the response in channel (ack_response) BPMP initiating the call: 1) wait for request (is_request_ready) 2) copy request message payload from shared location 3) acknowledge the request in channel (ack_request) 4) check that channel is free to transmit response (is_response_channel_free) 5) copy response message payload to shared location 6) post the response message to channel (post_response) 7) notify BPMP that channel state has been updated (ring_doorbell) Signed-off-by: Timo Alho <talho@nvidia.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-01-25 01:03:52 +08:00
if (tegra_bpmp_is_response_ready(channel)) {
tegra_bpmp_channel_signal(channel);
clear_bit(i, busy);
}
}
spin_unlock(&bpmp->lock);
}
static int tegra_bpmp_probe(struct platform_device *pdev)
{
struct tegra_bpmp *bpmp;
char tag[TAG_SZ];
size_t size;
int err;
bpmp = devm_kzalloc(&pdev->dev, sizeof(*bpmp), GFP_KERNEL);
if (!bpmp)
return -ENOMEM;
bpmp->soc = of_device_get_match_data(&pdev->dev);
bpmp->dev = &pdev->dev;
INIT_LIST_HEAD(&bpmp->mrqs);
spin_lock_init(&bpmp->lock);
bpmp->threaded.count = bpmp->soc->channels.thread.count;
sema_init(&bpmp->threaded.lock, bpmp->threaded.count);
size = BITS_TO_LONGS(bpmp->threaded.count) * sizeof(long);
bpmp->threaded.allocated = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!bpmp->threaded.allocated)
return -ENOMEM;
bpmp->threaded.busy = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!bpmp->threaded.busy)
return -ENOMEM;
spin_lock_init(&bpmp->atomic_tx_lock);
bpmp->tx_channel = devm_kzalloc(&pdev->dev, sizeof(*bpmp->tx_channel),
GFP_KERNEL);
if (!bpmp->tx_channel)
return -ENOMEM;
bpmp->rx_channel = devm_kzalloc(&pdev->dev, sizeof(*bpmp->rx_channel),
GFP_KERNEL);
if (!bpmp->rx_channel)
return -ENOMEM;
bpmp->threaded_channels = devm_kcalloc(&pdev->dev, bpmp->threaded.count,
sizeof(*bpmp->threaded_channels),
GFP_KERNEL);
if (!bpmp->threaded_channels)
return -ENOMEM;
err = bpmp->soc->ops->init(bpmp);
if (err < 0)
return err;
err = tegra_bpmp_request_mrq(bpmp, MRQ_PING,
tegra_bpmp_mrq_handle_ping, bpmp);
if (err < 0)
goto deinit;
err = tegra_bpmp_ping(bpmp);
if (err < 0) {
dev_err(&pdev->dev, "failed to ping BPMP: %d\n", err);
goto free_mrq;
}
err = tegra_bpmp_get_firmware_tag(bpmp, tag, sizeof(tag));
if (err < 0) {
dev_err(&pdev->dev, "failed to get firmware tag: %d\n", err);
goto free_mrq;
}
dev_info(&pdev->dev, "firmware: %.*s\n", (int)sizeof(tag), tag);
platform_set_drvdata(pdev, bpmp);
err = of_platform_default_populate(pdev->dev.of_node, NULL, &pdev->dev);
if (err < 0)
goto free_mrq;
if (of_find_property(pdev->dev.of_node, "#clock-cells", NULL)) {
err = tegra_bpmp_init_clocks(bpmp);
if (err < 0)
goto free_mrq;
}
if (of_find_property(pdev->dev.of_node, "#reset-cells", NULL)) {
err = tegra_bpmp_init_resets(bpmp);
if (err < 0)
goto free_mrq;
}
if (of_find_property(pdev->dev.of_node, "#power-domain-cells", NULL)) {
err = tegra_bpmp_init_powergates(bpmp);
if (err < 0)
goto free_mrq;
}
err = tegra_bpmp_init_debugfs(bpmp);
if (err < 0)
dev_err(&pdev->dev, "debugfs initialization failed: %d\n", err);
return 0;
free_mrq:
tegra_bpmp_free_mrq(bpmp, MRQ_PING, bpmp);
deinit:
if (bpmp->soc->ops->deinit)
bpmp->soc->ops->deinit(bpmp);
return err;
}
static int __maybe_unused tegra_bpmp_resume(struct device *dev)
{
struct tegra_bpmp *bpmp = dev_get_drvdata(dev);
if (bpmp->soc->ops->resume)
return bpmp->soc->ops->resume(bpmp);
else
return 0;
}
static const struct dev_pm_ops tegra_bpmp_pm_ops = {
.resume_early = tegra_bpmp_resume,
};
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
static const struct tegra_bpmp_soc tegra186_soc = {
.channels = {
.cpu_tx = {
.offset = 3,
.timeout = 60 * USEC_PER_SEC,
},
.thread = {
.offset = 0,
.count = 3,
.timeout = 600 * USEC_PER_SEC,
},
.cpu_rx = {
.offset = 13,
.timeout = 0,
},
},
.ops = &tegra186_bpmp_ops,
.num_resets = 193,
};
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
static const struct tegra_bpmp_soc tegra210_soc = {
.channels = {
.cpu_tx = {
.offset = 0,
.count = 1,
.timeout = 60 * USEC_PER_SEC,
},
.thread = {
.offset = 4,
.count = 1,
.timeout = 600 * USEC_PER_SEC,
},
.cpu_rx = {
.offset = 8,
.count = 1,
.timeout = 0,
},
},
.ops = &tegra210_bpmp_ops,
};
#endif
static const struct of_device_id tegra_bpmp_match[] = {
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
{ .compatible = "nvidia,tegra186-bpmp", .data = &tegra186_soc },
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
{ .compatible = "nvidia,tegra210-bpmp", .data = &tegra210_soc },
#endif
{ }
};
static struct platform_driver tegra_bpmp_driver = {
.driver = {
.name = "tegra-bpmp",
.of_match_table = tegra_bpmp_match,
.pm = &tegra_bpmp_pm_ops,
},
.probe = tegra_bpmp_probe,
};
static int __init tegra_bpmp_init(void)
{
return platform_driver_register(&tegra_bpmp_driver);
}
core_initcall(tegra_bpmp_init);