linux/drivers/net/xtsonic.c

326 lines
8.3 KiB
C
Raw Normal View History

/*
* xtsonic.c
*
* (C) 2001 - 2007 Tensilica Inc.
* Kevin Chea <kchea@yahoo.com>
* Marc Gauthier <marc@linux-xtensa.org>
* Chris Zankel <chris@zankel.net>
*
* (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*
* This driver is based on work from Andreas Busse, but most of
* the code is rewritten.
*
* (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
*
* A driver for the onboard Sonic ethernet controller on the XT2000.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/dma.h>
static char xtsonic_string[] = "xtsonic";
extern unsigned xtboard_nvram_valid(void);
extern void xtboard_get_ether_addr(unsigned char *buf);
#include "sonic.h"
/*
* According to the documentation for the Sonic ethernet controller,
* EOBC should be 760 words (1520 bytes) for 32-bit applications, and,
* as such, 2 words less than the buffer size. The value for RBSIZE
* defined in sonic.h, however is only 1520.
*
* (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and
* RBSIZE 1520 bytes)
*/
#undef SONIC_RBSIZE
#define SONIC_RBSIZE 1524
/*
* The chip provides 256 byte register space.
*/
#define SONIC_MEM_SIZE 0x100
/*
* Macros to access SONIC registers
*/
#define SONIC_READ(reg) \
(0xffff & *((volatile unsigned int *)dev->base_addr+reg))
#define SONIC_WRITE(reg,val) \
*((volatile unsigned int *)dev->base_addr+reg) = val
/* Use 0 for production, 1 for verification, and >2 for debug */
#ifdef SONIC_DEBUG
static unsigned int sonic_debug = SONIC_DEBUG;
#else
static unsigned int sonic_debug = 1;
#endif
/*
* We cannot use station (ethernet) address prefixes to detect the
* sonic controller since these are board manufacturer depended.
* So we check for known Silicon Revision IDs instead.
*/
static unsigned short known_revisions[] =
{
0x101, /* SONIC 83934 */
0xffff /* end of list */
};
static int xtsonic_open(struct net_device *dev)
{
if (request_irq(dev->irq,sonic_interrupt,IRQF_DISABLED,"sonic",dev)) {
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
dev->name, dev->irq);
return -EAGAIN;
}
return sonic_open(dev);
}
static int xtsonic_close(struct net_device *dev)
{
int err;
err = sonic_close(dev);
free_irq(dev->irq, dev);
return err;
}
static const struct net_device_ops xtsonic_netdev_ops = {
.ndo_open = xtsonic_open,
.ndo_stop = xtsonic_close,
.ndo_start_xmit = sonic_send_packet,
.ndo_get_stats = sonic_get_stats,
.ndo_set_multicast_list = sonic_multicast_list,
.ndo_tx_timeout = sonic_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
};
static int __init sonic_probe1(struct net_device *dev)
{
static unsigned version_printed = 0;
unsigned int silicon_revision;
struct sonic_local *lp = netdev_priv(dev);
unsigned int base_addr = dev->base_addr;
int i;
int err = 0;
if (!request_mem_region(base_addr, 0x100, xtsonic_string))
return -EBUSY;
/*
* get the Silicon Revision ID. If this is one of the known
* one assume that we found a SONIC ethernet controller at
* the expected location.
*/
silicon_revision = SONIC_READ(SONIC_SR);
if (sonic_debug > 1)
printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision);
i = 0;
while ((known_revisions[i] != 0xffff) &&
(known_revisions[i] != silicon_revision))
i++;
if (known_revisions[i] == 0xffff) {
printk("SONIC ethernet controller not found (0x%4x)\n",
silicon_revision);
return -ENODEV;
}
if (sonic_debug && version_printed++ == 0)
printk(version);
/*
* Put the sonic into software reset, then retrieve ethernet address.
* Note: we are assuming that the boot-loader has initialized the cam.
*/
SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
SONIC_WRITE(SONIC_DCR,
SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS);
SONIC_WRITE(SONIC_CEP,0);
SONIC_WRITE(SONIC_IMR,0);
SONIC_WRITE(SONIC_CMD,SONIC_CR_RST);
SONIC_WRITE(SONIC_CEP,0);
for (i=0; i<3; i++) {
unsigned int val = SONIC_READ(SONIC_CAP0-i);
dev->dev_addr[i*2] = val;
dev->dev_addr[i*2+1] = val >> 8;
}
/* Initialize the device structure. */
lp->dma_bitmode = SONIC_BITMODE32;
/*
* Allocate local private descriptor areas in uncached space.
* The entire structure must be located within the same 64kb segment.
* A simple way to ensure this is to allocate twice the
* size of the structure -- given that the structure is
* much less than 64 kB, at least one of the halves of
* the allocated area will be contained entirely in 64 kB.
* We also allocate extra space for a pointer to allow freeing
* this structure later on (in xtsonic_cleanup_module()).
*/
lp->descriptors =
dma_alloc_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
&lp->descriptors_laddr, GFP_KERNEL);
if (lp->descriptors == NULL) {
printk(KERN_ERR "%s: couldn't alloc DMA memory for "
" descriptors.\n", dev_name(lp->device));
goto out;
}
lp->cda = lp->descriptors;
lp->tda = lp->cda + (SIZEOF_SONIC_CDA
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
/* get the virtual dma address */
lp->cda_laddr = lp->descriptors_laddr;
lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
dev->netdev_ops = &xtsonic_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
/*
* clear tally counter
*/
SONIC_WRITE(SONIC_CRCT,0xffff);
SONIC_WRITE(SONIC_FAET,0xffff);
SONIC_WRITE(SONIC_MPT,0xffff);
return 0;
out:
release_region(dev->base_addr, SONIC_MEM_SIZE);
return err;
}
/*
* Probe for a SONIC ethernet controller on an XT2000 board.
* Actually probing is superfluous but we're paranoid.
*/
int __devinit xtsonic_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct sonic_local *lp;
struct resource *resmem, *resirq;
int err = 0;
if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL)
return -ENODEV;
if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL)
return -ENODEV;
if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL)
return -ENOMEM;
lp = netdev_priv(dev);
lp->device = &pdev->dev;
SET_NETDEV_DEV(dev, &pdev->dev);
netdev_boot_setup_check(dev);
dev->base_addr = resmem->start;
dev->irq = resirq->start;
if ((err = sonic_probe1(dev)))
goto out;
if ((err = register_netdev(dev)))
goto out1;
printk("%s: SONIC ethernet @%08lx, MAC %pM, IRQ %d\n", dev->name,
dev->base_addr, dev->dev_addr, dev->irq);
return 0;
out1:
release_region(dev->base_addr, SONIC_MEM_SIZE);
out:
free_netdev(dev);
return err;
}
MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver");
module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "xtsonic debug level (1-4)");
#include "sonic.c"
static int __devexit xtsonic_device_remove (struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sonic_local *lp = netdev_priv(dev);
unregister_netdev(dev);
dma_free_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
release_region (dev->base_addr, SONIC_MEM_SIZE);
free_netdev(dev);
return 0;
}
static struct platform_driver xtsonic_driver = {
.probe = xtsonic_probe,
.remove = __devexit_p(xtsonic_device_remove),
.driver = {
.name = xtsonic_string,
},
};
static int __init xtsonic_init(void)
{
return platform_driver_register(&xtsonic_driver);
}
static void __exit xtsonic_cleanup(void)
{
platform_driver_unregister(&xtsonic_driver);
}
module_init(xtsonic_init);
module_exit(xtsonic_cleanup);