linux/drivers/gpu/drm/nouveau/nouveau_display.c

996 lines
25 KiB
C
Raw Normal View History

/*
* Copyright (C) 2008 Maarten Maathuis.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
* LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
* OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
*/
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
#include <acpi/video.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <nvif/class.h>
#include "nouveau_fbcon.h"
#include "dispnv04/hw.h"
#include "nouveau_crtc.h"
#include "nouveau_dma.h"
#include "nouveau_gem.h"
#include "nouveau_connector.h"
#include "nv50_display.h"
#include "nouveau_fence.h"
#include <nvif/cl0046.h>
#include <nvif/event.h>
static int
nouveau_display_vblank_handler(struct nvif_notify *notify)
{
struct nouveau_crtc *nv_crtc =
container_of(notify, typeof(*nv_crtc), vblank);
drm_crtc_handle_vblank(&nv_crtc->base);
return NVIF_NOTIFY_KEEP;
}
int
nouveau_display_vblank_enable(struct drm_device *dev, unsigned int pipe)
{
struct drm_crtc *crtc;
struct nouveau_crtc *nv_crtc;
crtc = drm_crtc_from_index(dev, pipe);
if (!crtc)
return -EINVAL;
nv_crtc = nouveau_crtc(crtc);
nvif_notify_get(&nv_crtc->vblank);
return 0;
}
void
nouveau_display_vblank_disable(struct drm_device *dev, unsigned int pipe)
{
struct drm_crtc *crtc;
struct nouveau_crtc *nv_crtc;
crtc = drm_crtc_from_index(dev, pipe);
if (!crtc)
return;
nv_crtc = nouveau_crtc(crtc);
nvif_notify_put(&nv_crtc->vblank);
}
static inline int
calc(int blanks, int blanke, int total, int line)
{
if (blanke >= blanks) {
if (line >= blanks)
line -= total;
} else {
if (line >= blanks)
line -= total;
line -= blanke + 1;
}
return line;
}
static int
nouveau_display_scanoutpos_head(struct drm_crtc *crtc, int *vpos, int *hpos,
ktime_t *stime, ktime_t *etime)
{
struct {
struct nv04_disp_mthd_v0 base;
struct nv04_disp_scanoutpos_v0 scan;
} args = {
.base.method = NV04_DISP_SCANOUTPOS,
.base.head = nouveau_crtc(crtc)->index,
};
struct nouveau_display *disp = nouveau_display(crtc->dev);
struct drm_vblank_crtc *vblank = &crtc->dev->vblank[drm_crtc_index(crtc)];
int ret, retry = 1;
do {
ret = nvif_mthd(&disp->disp, 0, &args, sizeof(args));
if (ret != 0)
return 0;
if (args.scan.vline) {
ret |= DRM_SCANOUTPOS_ACCURATE;
ret |= DRM_SCANOUTPOS_VALID;
break;
}
if (retry) ndelay(vblank->linedur_ns);
} while (retry--);
*hpos = args.scan.hline;
*vpos = calc(args.scan.vblanks, args.scan.vblanke,
args.scan.vtotal, args.scan.vline);
if (stime) *stime = ns_to_ktime(args.scan.time[0]);
if (etime) *etime = ns_to_ktime(args.scan.time[1]);
if (*vpos < 0)
ret |= DRM_SCANOUTPOS_IN_VBLANK;
return ret;
}
int
nouveau_display_scanoutpos(struct drm_device *dev, unsigned int pipe,
unsigned int flags, int *vpos, int *hpos,
ktime_t *stime, ktime_t *etime,
const struct drm_display_mode *mode)
{
struct drm_crtc *crtc;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (nouveau_crtc(crtc)->index == pipe) {
return nouveau_display_scanoutpos_head(crtc, vpos, hpos,
stime, etime);
}
}
return 0;
}
int
nouveau_display_vblstamp(struct drm_device *dev, unsigned int pipe,
int *max_error, struct timeval *time, unsigned flags)
{
struct drm_crtc *crtc;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (nouveau_crtc(crtc)->index == pipe) {
struct drm_display_mode *mode;
if (drm_drv_uses_atomic_modeset(dev))
mode = &crtc->state->adjusted_mode;
else
mode = &crtc->hwmode;
return drm_calc_vbltimestamp_from_scanoutpos(dev,
pipe, max_error, time, flags, mode);
}
}
return -EINVAL;
}
static void
nouveau_display_vblank_fini(struct drm_device *dev)
{
struct drm_crtc *crtc;
drm_vblank_cleanup(dev);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
nvif_notify_fini(&nv_crtc->vblank);
}
}
static int
nouveau_display_vblank_init(struct drm_device *dev)
{
struct nouveau_display *disp = nouveau_display(dev);
struct drm_crtc *crtc;
int ret;
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
ret = nvif_notify_init(&disp->disp,
nouveau_display_vblank_handler, false,
NV04_DISP_NTFY_VBLANK,
&(struct nvif_notify_head_req_v0) {
.head = nv_crtc->index,
},
sizeof(struct nvif_notify_head_req_v0),
sizeof(struct nvif_notify_head_rep_v0),
&nv_crtc->vblank);
if (ret) {
nouveau_display_vblank_fini(dev);
return ret;
}
}
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret) {
nouveau_display_vblank_fini(dev);
return ret;
}
return 0;
}
static void
nouveau_user_framebuffer_destroy(struct drm_framebuffer *drm_fb)
{
struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb);
if (fb->nvbo)
drm_gem_object_unreference_unlocked(&fb->nvbo->gem);
drm_framebuffer_cleanup(drm_fb);
kfree(fb);
}
static int
nouveau_user_framebuffer_create_handle(struct drm_framebuffer *drm_fb,
struct drm_file *file_priv,
unsigned int *handle)
{
struct nouveau_framebuffer *fb = nouveau_framebuffer(drm_fb);
return drm_gem_handle_create(file_priv, &fb->nvbo->gem, handle);
}
static const struct drm_framebuffer_funcs nouveau_framebuffer_funcs = {
.destroy = nouveau_user_framebuffer_destroy,
.create_handle = nouveau_user_framebuffer_create_handle,
};
int
nouveau_framebuffer_new(struct drm_device *dev,
const struct drm_mode_fb_cmd2 *mode_cmd,
struct nouveau_bo *nvbo,
struct nouveau_framebuffer **pfb)
{
struct nouveau_framebuffer *fb;
int ret;
if (!(fb = *pfb = kzalloc(sizeof(*fb), GFP_KERNEL)))
return -ENOMEM;
drm_helper_mode_fill_fb_struct(dev, &fb->base, mode_cmd);
fb->nvbo = nvbo;
ret = drm_framebuffer_init(dev, &fb->base, &nouveau_framebuffer_funcs);
if (ret)
kfree(fb);
return ret;
}
struct drm_framebuffer *
nouveau_user_framebuffer_create(struct drm_device *dev,
struct drm_file *file_priv,
const struct drm_mode_fb_cmd2 *mode_cmd)
{
struct nouveau_framebuffer *fb;
struct nouveau_bo *nvbo;
struct drm_gem_object *gem;
int ret;
gem = drm_gem_object_lookup(file_priv, mode_cmd->handles[0]);
if (!gem)
return ERR_PTR(-ENOENT);
nvbo = nouveau_gem_object(gem);
ret = nouveau_framebuffer_new(dev, mode_cmd, nvbo, &fb);
if (ret == 0)
return &fb->base;
drm_gem_object_unreference_unlocked(gem);
return ERR_PTR(ret);
}
static const struct drm_mode_config_funcs nouveau_mode_config_funcs = {
.fb_create = nouveau_user_framebuffer_create,
.output_poll_changed = nouveau_fbcon_output_poll_changed,
};
struct nouveau_drm_prop_enum_list {
u8 gen_mask;
int type;
char *name;
};
static struct nouveau_drm_prop_enum_list underscan[] = {
{ 6, UNDERSCAN_AUTO, "auto" },
{ 6, UNDERSCAN_OFF, "off" },
{ 6, UNDERSCAN_ON, "on" },
{}
};
static struct nouveau_drm_prop_enum_list dither_mode[] = {
{ 7, DITHERING_MODE_AUTO, "auto" },
{ 7, DITHERING_MODE_OFF, "off" },
{ 1, DITHERING_MODE_ON, "on" },
{ 6, DITHERING_MODE_STATIC2X2, "static 2x2" },
{ 6, DITHERING_MODE_DYNAMIC2X2, "dynamic 2x2" },
{ 4, DITHERING_MODE_TEMPORAL, "temporal" },
{}
};
static struct nouveau_drm_prop_enum_list dither_depth[] = {
{ 6, DITHERING_DEPTH_AUTO, "auto" },
{ 6, DITHERING_DEPTH_6BPC, "6 bpc" },
{ 6, DITHERING_DEPTH_8BPC, "8 bpc" },
{}
};
#define PROP_ENUM(p,gen,n,list) do { \
struct nouveau_drm_prop_enum_list *l = (list); \
int c = 0; \
while (l->gen_mask) { \
if (l->gen_mask & (1 << (gen))) \
c++; \
l++; \
} \
if (c) { \
p = drm_property_create(dev, DRM_MODE_PROP_ENUM, n, c); \
l = (list); \
c = 0; \
while (p && l->gen_mask) { \
if (l->gen_mask & (1 << (gen))) { \
drm_property_add_enum(p, c, l->type, l->name); \
c++; \
} \
l++; \
} \
} \
} while(0)
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
static void
nouveau_display_hpd_work(struct work_struct *work)
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
{
struct nouveau_drm *drm = container_of(work, typeof(*drm), hpd_work);
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
pm_runtime_get_sync(drm->dev->dev);
drm_helper_hpd_irq_event(drm->dev);
pm_runtime_mark_last_busy(drm->dev->dev);
pm_runtime_put_sync(drm->dev->dev);
}
#ifdef CONFIG_ACPI
/*
* Hans de Goede: This define belongs in acpi/video.h, I've submitted a patch
* to the acpi subsys to move it there from drivers/acpi/acpi_video.c .
* This should be dropped once that is merged.
*/
#ifndef ACPI_VIDEO_NOTIFY_PROBE
#define ACPI_VIDEO_NOTIFY_PROBE 0x81
#endif
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
static int
nouveau_display_acpi_ntfy(struct notifier_block *nb, unsigned long val,
void *data)
{
struct nouveau_drm *drm = container_of(nb, typeof(*drm), acpi_nb);
struct acpi_bus_event *info = data;
if (!strcmp(info->device_class, ACPI_VIDEO_CLASS)) {
if (info->type == ACPI_VIDEO_NOTIFY_PROBE) {
/*
* This may be the only indication we receive of a
* connector hotplug on a runtime suspended GPU,
* schedule hpd_work to check.
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
*/
schedule_work(&drm->hpd_work);
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
/* acpi-video should not generate keypresses for this */
return NOTIFY_BAD;
}
}
return NOTIFY_DONE;
}
#endif
int
nouveau_display_init(struct drm_device *dev)
{
struct nouveau_display *disp = nouveau_display(dev);
struct nouveau_drm *drm = nouveau_drm(dev);
struct drm_connector *connector;
int ret;
ret = disp->init(dev);
if (ret)
return ret;
/* enable polling for external displays */
if (!dev->mode_config.poll_enabled)
drm_kms_helper_poll_enable(dev);
/* enable hotplug interrupts */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct nouveau_connector *conn = nouveau_connector(connector);
nvif_notify_get(&conn->hpd);
}
/* enable flip completion events */
nvif_notify_get(&drm->flip);
return ret;
}
void
nouveau_display_fini(struct drm_device *dev, bool suspend)
{
struct nouveau_display *disp = nouveau_display(dev);
struct nouveau_drm *drm = nouveau_drm(dev);
struct drm_connector *connector;
struct drm_crtc *crtc;
if (!suspend) {
if (drm_drv_uses_atomic_modeset(dev))
drm_atomic_helper_shutdown(dev);
else
drm_crtc_force_disable_all(dev);
}
/* Make sure that drm and hw vblank irqs get properly disabled. */
drm_for_each_crtc(crtc, dev)
drm_crtc_vblank_off(crtc);
/* disable flip completion events */
nvif_notify_put(&drm->flip);
/* disable hotplug interrupts */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct nouveau_connector *conn = nouveau_connector(connector);
nvif_notify_put(&conn->hpd);
}
drm_kms_helper_poll_disable(dev);
disp->fini(dev);
}
static void
nouveau_display_create_properties(struct drm_device *dev)
{
struct nouveau_display *disp = nouveau_display(dev);
int gen;
if (disp->disp.oclass < NV50_DISP)
gen = 0;
else
if (disp->disp.oclass < GF110_DISP)
gen = 1;
else
gen = 2;
PROP_ENUM(disp->dithering_mode, gen, "dithering mode", dither_mode);
PROP_ENUM(disp->dithering_depth, gen, "dithering depth", dither_depth);
PROP_ENUM(disp->underscan_property, gen, "underscan", underscan);
disp->underscan_hborder_property =
drm_property_create_range(dev, 0, "underscan hborder", 0, 128);
disp->underscan_vborder_property =
drm_property_create_range(dev, 0, "underscan vborder", 0, 128);
if (gen < 1)
return;
/* -90..+90 */
disp->vibrant_hue_property =
drm_property_create_range(dev, 0, "vibrant hue", 0, 180);
/* -100..+100 */
disp->color_vibrance_property =
drm_property_create_range(dev, 0, "color vibrance", 0, 200);
}
int
nouveau_display_create(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nvkm_device *device = nvxx_device(&drm->client.device);
struct nouveau_display *disp;
int ret;
disp = drm->display = kzalloc(sizeof(*disp), GFP_KERNEL);
if (!disp)
return -ENOMEM;
drm_mode_config_init(dev);
drm_mode_create_scaling_mode_property(dev);
drm_mode_create_dvi_i_properties(dev);
dev->mode_config.funcs = &nouveau_mode_config_funcs;
dev->mode_config.fb_base = device->func->resource_addr(device, 1);
dev->mode_config.min_width = 0;
dev->mode_config.min_height = 0;
if (drm->client.device.info.family < NV_DEVICE_INFO_V0_CELSIUS) {
dev->mode_config.max_width = 2048;
dev->mode_config.max_height = 2048;
} else
if (drm->client.device.info.family < NV_DEVICE_INFO_V0_TESLA) {
dev->mode_config.max_width = 4096;
dev->mode_config.max_height = 4096;
} else
if (drm->client.device.info.family < NV_DEVICE_INFO_V0_FERMI) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
} else {
dev->mode_config.max_width = 16384;
dev->mode_config.max_height = 16384;
}
dev->mode_config.preferred_depth = 24;
dev->mode_config.prefer_shadow = 1;
if (drm->client.device.info.chipset < 0x11)
dev->mode_config.async_page_flip = false;
else
dev->mode_config.async_page_flip = true;
drm_kms_helper_poll_init(dev);
drm_kms_helper_poll_disable(dev);
if (nouveau_modeset != 2 && drm->vbios.dcb.entries) {
static const u16 oclass[] = {
GP102_DISP,
GP100_DISP,
GM200_DISP,
GM107_DISP,
GK110_DISP,
GK104_DISP,
GF110_DISP,
GT214_DISP,
GT206_DISP,
GT200_DISP,
G82_DISP,
NV50_DISP,
NV04_DISP,
};
int i;
for (i = 0, ret = -ENODEV; ret && i < ARRAY_SIZE(oclass); i++) {
ret = nvif_object_init(&drm->client.device.object, 0,
oclass[i], NULL, 0, &disp->disp);
}
if (ret == 0) {
nouveau_display_create_properties(dev);
if (disp->disp.oclass < NV50_DISP)
ret = nv04_display_create(dev);
else
ret = nv50_display_create(dev);
}
} else {
ret = 0;
}
if (ret)
goto disp_create_err;
drm_mode_config_reset(dev);
if (dev->mode_config.num_crtc) {
ret = nouveau_display_vblank_init(dev);
if (ret)
goto vblank_err;
}
nouveau_backlight_init(dev);
INIT_WORK(&drm->hpd_work, nouveau_display_hpd_work);
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
#ifdef CONFIG_ACPI
drm->acpi_nb.notifier_call = nouveau_display_acpi_ntfy;
register_acpi_notifier(&drm->acpi_nb);
#endif
return 0;
vblank_err:
disp->dtor(dev);
disp_create_err:
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);
return ret;
}
void
nouveau_display_destroy(struct drm_device *dev)
{
struct nouveau_display *disp = nouveau_display(dev);
drm/nouveau: Intercept ACPI_VIDEO_NOTIFY_PROBE Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE acpi-video event when an external device gets plugged in (and again on modesets on that connector), the default behavior in the acpi-video driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which causes e.g. gnome-settings-daemon to ask us to rescan the connectors (good), but also causes g-s-d to switch to mirror mode on a newly plugged monitor rather then using the monitor to extend the desktop (bad) as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop vs mirror mode. More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on changing the mode on the connector, which cause g-s-d to switch between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE event and we end up with an endless loop. This commit fixes this by adding an acpi notifier block handler to nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and: 1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event() on them, this is necessary in some cases for the GPU to detect connector hotplug events while runtime suspended 2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus KEY_SWITCHVIDEOMODE key-press event There already is another acpi notifier block handler registered in drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not suitable since that one gets unregistered on runtime suspend, and we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-11-10 01:17:44 +08:00
#ifdef CONFIG_ACPI
unregister_acpi_notifier(&nouveau_drm(dev)->acpi_nb);
#endif
nouveau_backlight_exit(dev);
nouveau_display_vblank_fini(dev);
drm_kms_helper_poll_fini(dev);
drm_mode_config_cleanup(dev);
if (disp->dtor)
disp->dtor(dev);
nvif_object_fini(&disp->disp);
nouveau_drm(dev)->display = NULL;
kfree(disp);
}
int
nouveau_display_suspend(struct drm_device *dev, bool runtime)
{
struct nouveau_display *disp = nouveau_display(dev);
struct drm_crtc *crtc;
if (drm_drv_uses_atomic_modeset(dev)) {
if (!runtime) {
disp->suspend = drm_atomic_helper_suspend(dev);
if (IS_ERR(disp->suspend)) {
int ret = PTR_ERR(disp->suspend);
disp->suspend = NULL;
return ret;
}
}
nouveau_display_fini(dev, true);
return 0;
}
nouveau_display_fini(dev, true);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_framebuffer *nouveau_fb;
nouveau_fb = nouveau_framebuffer(crtc->primary->fb);
if (!nouveau_fb || !nouveau_fb->nvbo)
continue;
nouveau_bo_unpin(nouveau_fb->nvbo);
}
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
if (nv_crtc->cursor.nvbo) {
if (nv_crtc->cursor.set_offset)
nouveau_bo_unmap(nv_crtc->cursor.nvbo);
nouveau_bo_unpin(nv_crtc->cursor.nvbo);
}
}
return 0;
}
void
nouveau_display_resume(struct drm_device *dev, bool runtime)
{
struct nouveau_display *disp = nouveau_display(dev);
struct nouveau_drm *drm = nouveau_drm(dev);
struct drm_crtc *crtc;
int ret;
if (drm_drv_uses_atomic_modeset(dev)) {
nouveau_display_init(dev);
if (disp->suspend) {
drm_atomic_helper_resume(dev, disp->suspend);
disp->suspend = NULL;
}
return;
}
/* re-pin fb/cursors */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_framebuffer *nouveau_fb;
nouveau_fb = nouveau_framebuffer(crtc->primary->fb);
if (!nouveau_fb || !nouveau_fb->nvbo)
continue;
ret = nouveau_bo_pin(nouveau_fb->nvbo, TTM_PL_FLAG_VRAM, true);
if (ret)
NV_ERROR(drm, "Could not pin framebuffer\n");
}
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
if (!nv_crtc->cursor.nvbo)
continue;
ret = nouveau_bo_pin(nv_crtc->cursor.nvbo, TTM_PL_FLAG_VRAM, true);
if (!ret && nv_crtc->cursor.set_offset)
ret = nouveau_bo_map(nv_crtc->cursor.nvbo);
if (ret)
NV_ERROR(drm, "Could not pin/map cursor.\n");
}
nouveau_display_init(dev);
/* Force CLUT to get re-loaded during modeset */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
nv_crtc->lut.depth = 0;
}
/* This should ensure we don't hit a locking problem when someone
* wakes us up via a connector. We should never go into suspend
* while the display is on anyways.
*/
if (runtime)
return;
drm_helper_resume_force_mode(dev);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
if (!nv_crtc->cursor.nvbo)
continue;
if (nv_crtc->cursor.set_offset)
nv_crtc->cursor.set_offset(nv_crtc, nv_crtc->cursor.nvbo->bo.offset);
nv_crtc->cursor.set_pos(nv_crtc, nv_crtc->cursor_saved_x,
nv_crtc->cursor_saved_y);
}
}
static int
nouveau_page_flip_emit(struct nouveau_channel *chan,
struct nouveau_bo *old_bo,
struct nouveau_bo *new_bo,
struct nouveau_page_flip_state *s,
struct nouveau_fence **pfence)
{
struct nouveau_fence_chan *fctx = chan->fence;
struct nouveau_drm *drm = chan->drm;
struct drm_device *dev = drm->dev;
unsigned long flags;
int ret;
/* Queue it to the pending list */
spin_lock_irqsave(&dev->event_lock, flags);
list_add_tail(&s->head, &fctx->flip);
spin_unlock_irqrestore(&dev->event_lock, flags);
/* Synchronize with the old framebuffer */
ret = nouveau_fence_sync(old_bo, chan, false, false);
if (ret)
goto fail;
/* Emit the pageflip */
ret = RING_SPACE(chan, 2);
if (ret)
goto fail;
BEGIN_NV04(chan, NvSubSw, NV_SW_PAGE_FLIP, 1);
OUT_RING (chan, 0x00000000);
FIRE_RING (chan);
ret = nouveau_fence_new(chan, false, pfence);
if (ret)
goto fail;
return 0;
fail:
spin_lock_irqsave(&dev->event_lock, flags);
list_del(&s->head);
spin_unlock_irqrestore(&dev->event_lock, flags);
return ret;
}
int
nouveau_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event, u32 flags,
struct drm_modeset_acquire_ctx *ctx)
{
const int swap_interval = (flags & DRM_MODE_PAGE_FLIP_ASYNC) ? 0 : 1;
struct drm_device *dev = crtc->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_bo *old_bo = nouveau_framebuffer(crtc->primary->fb)->nvbo;
struct nouveau_bo *new_bo = nouveau_framebuffer(fb)->nvbo;
struct nouveau_page_flip_state *s;
struct nouveau_channel *chan;
struct nouveau_cli *cli;
struct nouveau_fence *fence;
struct nv04_display *dispnv04 = nv04_display(dev);
int head = nouveau_crtc(crtc)->index;
int ret;
chan = drm->channel;
if (!chan)
return -ENODEV;
cli = (void *)chan->user.client;
s = kzalloc(sizeof(*s), GFP_KERNEL);
if (!s)
return -ENOMEM;
if (new_bo != old_bo) {
ret = nouveau_bo_pin(new_bo, TTM_PL_FLAG_VRAM, true);
if (ret)
goto fail_free;
}
mutex_lock(&cli->mutex);
ret = ttm_bo_reserve(&new_bo->bo, true, false, NULL);
if (ret)
goto fail_unpin;
/* synchronise rendering channel with the kernel's channel */
ret = nouveau_fence_sync(new_bo, chan, false, true);
if (ret) {
ttm_bo_unreserve(&new_bo->bo);
goto fail_unpin;
}
if (new_bo != old_bo) {
ttm_bo_unreserve(&new_bo->bo);
ret = ttm_bo_reserve(&old_bo->bo, true, false, NULL);
if (ret)
goto fail_unpin;
}
/* Initialize a page flip struct */
*s = (struct nouveau_page_flip_state)
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 05:32:20 +08:00
{ { }, event, crtc, fb->format->cpp[0] * 8, fb->pitches[0],
new_bo->bo.offset };
/* Keep vblanks on during flip, for the target crtc of this flip */
drm_crtc_vblank_get(crtc);
/* Emit a page flip */
if (swap_interval) {
ret = RING_SPACE(chan, 8);
if (ret)
goto fail_unreserve;
BEGIN_NV04(chan, NvSubImageBlit, 0x012c, 1);
OUT_RING (chan, 0);
BEGIN_NV04(chan, NvSubImageBlit, 0x0134, 1);
OUT_RING (chan, head);
BEGIN_NV04(chan, NvSubImageBlit, 0x0100, 1);
OUT_RING (chan, 0);
BEGIN_NV04(chan, NvSubImageBlit, 0x0130, 1);
OUT_RING (chan, 0);
}
nouveau_bo_ref(new_bo, &dispnv04->image[head]);
ret = nouveau_page_flip_emit(chan, old_bo, new_bo, s, &fence);
if (ret)
goto fail_unreserve;
mutex_unlock(&cli->mutex);
/* Update the crtc struct and cleanup */
crtc->primary->fb = fb;
nouveau_bo_fence(old_bo, fence, false);
ttm_bo_unreserve(&old_bo->bo);
if (old_bo != new_bo)
nouveau_bo_unpin(old_bo);
nouveau_fence_unref(&fence);
return 0;
fail_unreserve:
drm_crtc_vblank_put(crtc);
ttm_bo_unreserve(&old_bo->bo);
fail_unpin:
mutex_unlock(&cli->mutex);
if (old_bo != new_bo)
nouveau_bo_unpin(new_bo);
fail_free:
kfree(s);
return ret;
}
int
nouveau_finish_page_flip(struct nouveau_channel *chan,
struct nouveau_page_flip_state *ps)
{
struct nouveau_fence_chan *fctx = chan->fence;
struct nouveau_drm *drm = chan->drm;
struct drm_device *dev = drm->dev;
struct nouveau_page_flip_state *s;
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
if (list_empty(&fctx->flip)) {
NV_ERROR(drm, "unexpected pageflip\n");
spin_unlock_irqrestore(&dev->event_lock, flags);
return -EINVAL;
}
s = list_first_entry(&fctx->flip, struct nouveau_page_flip_state, head);
if (s->event) {
drm_crtc_arm_vblank_event(s->crtc, s->event);
} else {
drm/nouveau: Fix pre-nv50 pageflip events (v4) Apparently pre-nv50 pageflip events happen before the actual vblank period. Therefore that functionality got semi-disabled in commit af4870e406126b7ac0ae7c7ce5751f25ebe60f28 Author: Mario Kleiner <mario.kleiner.de@gmail.com> Date: Tue May 13 00:42:08 2014 +0200 drm/nouveau/kms/nv04-nv40: fix pageflip events via special case. Unfortunately that hack got uprooted in commit cc1ef118fc099295ae6aabbacc8af94d8d8885eb Author: Thierry Reding <treding@nvidia.com> Date: Wed Aug 12 17:00:31 2015 +0200 drm/irq: Make pipe unsigned and name consistent Triggering a warning when trying to sample the vblank timestamp for a non-existing pipe. There's a few ways to fix this: - Open-code the old behaviour, which just enshrines this slight breakage of the userspace ABI. - Revert Mario's commit and again inflict broken timestamps, again not pretty. - Fix this for real by delaying the pageflip TS until the next vblank interrupt, thereby making it accurate. This patch implements the third option. Since having a page flip interrupt that happens when the pageflip gets armed and not when it completes in the next vblank seems to be fairly common (older i915 hw works very similarly) create a new helper to arm vblank events for such drivers. v2 (Mario Kleiner): - Fix function prototypes in drmP.h - Add missing vblank_put() for pageflip completion without pageflip event. - Initialize sequence number for queued pageflip event to avoid trouble in drm_handle_vblank_events(). - Remove dead code and spelling fix. v3 (Mario Kleiner): - Add a signed-off-by and cc stable tag per Ilja's advice. v4 (Thierry Reding): - Fix kerneldoc typo, discovered by Michel Dänzer - Rearrange tags and changelog Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=106431 Cc: Thierry Reding <treding@nvidia.com> Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: stable@vger.kernel.org # v4.3 Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-11 00:37:31 +08:00
/* Give up ownership of vblank for page-flipped crtc */
drm_crtc_vblank_put(s->crtc);
}
list_del(&s->head);
if (ps)
*ps = *s;
kfree(s);
spin_unlock_irqrestore(&dev->event_lock, flags);
return 0;
}
int
nouveau_flip_complete(struct nvif_notify *notify)
{
struct nouveau_drm *drm = container_of(notify, typeof(*drm), flip);
struct nouveau_channel *chan = drm->channel;
struct nouveau_page_flip_state state;
if (!nouveau_finish_page_flip(chan, &state)) {
nv_set_crtc_base(drm->dev, drm_crtc_index(state.crtc),
state.offset + state.crtc->y *
state.pitch + state.crtc->x *
state.bpp / 8);
}
return NVIF_NOTIFY_KEEP;
}
int
nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev,
struct drm_mode_create_dumb *args)
{
struct nouveau_cli *cli = nouveau_cli(file_priv);
struct nouveau_bo *bo;
uint32_t domain;
int ret;
args->pitch = roundup(args->width * (args->bpp / 8), 256);
args->size = args->pitch * args->height;
args->size = roundup(args->size, PAGE_SIZE);
/* Use VRAM if there is any ; otherwise fallback to system memory */
if (nouveau_drm(dev)->client.device.info.ram_size != 0)
domain = NOUVEAU_GEM_DOMAIN_VRAM;
else
domain = NOUVEAU_GEM_DOMAIN_GART;
ret = nouveau_gem_new(cli, args->size, 0, domain, 0, 0, &bo);
if (ret)
return ret;
ret = drm_gem_handle_create(file_priv, &bo->gem, &args->handle);
drm_gem_object_unreference_unlocked(&bo->gem);
return ret;
}
int
nouveau_display_dumb_map_offset(struct drm_file *file_priv,
struct drm_device *dev,
uint32_t handle, uint64_t *poffset)
{
struct drm_gem_object *gem;
gem = drm_gem_object_lookup(file_priv, handle);
if (gem) {
struct nouveau_bo *bo = nouveau_gem_object(gem);
*poffset = drm_vma_node_offset_addr(&bo->bo.vma_node);
drm_gem_object_unreference_unlocked(gem);
return 0;
}
return -ENOENT;
}