linux/drivers/hwmon/k10temp.c

508 lines
13 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h/17h
* processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
* Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net>
*
* Implementation notes:
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
* - CCD register address information as well as the calculation to
* convert raw register values is from https://github.com/ocerman/zenpower.
* The information is not confirmed from chip datasheets, but experiments
* suggest that it provides reasonable temperature values.
*/
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <asm/amd_nb.h>
#include <asm/processor.h>
MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL");
static bool force;
module_param(force, bool, 0444);
MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
/* Provide lock for writing to NB_SMU_IND_ADDR */
static DEFINE_MUTEX(nb_smu_ind_mutex);
#ifndef PCI_DEVICE_ID_AMD_15H_M70H_NB_F3
#define PCI_DEVICE_ID_AMD_15H_M70H_NB_F3 0x15b3
#endif
/* CPUID function 0x80000001, ebx */
#define CPUID_PKGTYPE_MASK GENMASK(31, 28)
#define CPUID_PKGTYPE_F 0x00000000
#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
/* DRAM controller (PCI function 2) */
#define REG_DCT0_CONFIG_HIGH 0x094
#define DDR3_MODE BIT(8)
/* miscellaneous (PCI function 3) */
#define REG_HARDWARE_THERMAL_CONTROL 0x64
#define HTC_ENABLE BIT(0)
#define REG_REPORTED_TEMPERATURE 0xa4
#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
#define NB_CAP_HTC BIT(10)
/*
* For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
* and REG_REPORTED_TEMPERATURE have been moved to
* D0F0xBC_xD820_0C64 [Hardware Temperature Control]
* D0F0xBC_xD820_0CA4 [Reported Temperature Control]
*/
#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64
#define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4
/* Common for Zen CPU families (Family 17h and 18h and 19h) */
#define ZEN_REPORTED_TEMP_CTRL_BASE 0x00059800
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
#define ZEN_CCD_TEMP(offset, x) (ZEN_REPORTED_TEMP_CTRL_BASE + \
(offset) + ((x) * 4))
#define ZEN_CCD_TEMP_VALID BIT(11)
#define ZEN_CCD_TEMP_MASK GENMASK(10, 0)
#define ZEN_CUR_TEMP_SHIFT 21
#define ZEN_CUR_TEMP_RANGE_SEL_MASK BIT(19)
struct k10temp_data {
struct pci_dev *pdev;
void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
int temp_offset;
u32 temp_adjust_mask;
u32 show_temp;
bool is_zen;
u32 ccd_offset;
};
#define TCTL_BIT 0
#define TDIE_BIT 1
#define TCCD_BIT(x) ((x) + 2)
#define HAVE_TEMP(d, channel) ((d)->show_temp & BIT(channel))
#define HAVE_TDIE(d) HAVE_TEMP(d, TDIE_BIT)
struct tctl_offset {
u8 model;
char const *id;
int offset;
};
static const struct tctl_offset tctl_offset_table[] = {
{ 0x17, "AMD Ryzen 5 1600X", 20000 },
{ 0x17, "AMD Ryzen 7 1700X", 20000 },
{ 0x17, "AMD Ryzen 7 1800X", 20000 },
{ 0x17, "AMD Ryzen 7 2700X", 10000 },
{ 0x17, "AMD Ryzen Threadripper 19", 27000 }, /* 19{00,20,50}X */
{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
};
static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
{
pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);
}
static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval)
{
pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval);
}
static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn,
unsigned int base, int offset, u32 *val)
{
mutex_lock(&nb_smu_ind_mutex);
pci_bus_write_config_dword(pdev->bus, devfn,
base, offset);
pci_bus_read_config_dword(pdev->bus, devfn,
base + 4, val);
mutex_unlock(&nb_smu_ind_mutex);
}
static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval)
{
amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval);
}
static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval)
{
amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval);
}
static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval)
{
amd_smn_read(amd_pci_dev_to_node_id(pdev),
ZEN_REPORTED_TEMP_CTRL_BASE, regval);
}
static long get_raw_temp(struct k10temp_data *data)
{
u32 regval;
long temp;
data->read_tempreg(data->pdev, &regval);
temp = (regval >> ZEN_CUR_TEMP_SHIFT) * 125;
if (regval & data->temp_adjust_mask)
temp -= 49000;
return temp;
}
static const char *k10temp_temp_label[] = {
"Tctl",
"Tdie",
"Tccd1",
"Tccd2",
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
"Tccd3",
"Tccd4",
"Tccd5",
"Tccd6",
"Tccd7",
"Tccd8",
"Tccd9",
"Tccd10",
"Tccd11",
"Tccd12",
};
static int k10temp_read_labels(struct device *dev,
enum hwmon_sensor_types type,
u32 attr, int channel, const char **str)
{
switch (type) {
case hwmon_temp:
*str = k10temp_temp_label[channel];
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
long *val)
{
struct k10temp_data *data = dev_get_drvdata(dev);
u32 regval;
switch (attr) {
case hwmon_temp_input:
switch (channel) {
case 0: /* Tctl */
*val = get_raw_temp(data);
if (*val < 0)
*val = 0;
break;
case 1: /* Tdie */
*val = get_raw_temp(data) - data->temp_offset;
if (*val < 0)
*val = 0;
break;
case 2 ... 13: /* Tccd{1-12} */
amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
ZEN_CCD_TEMP(data->ccd_offset, channel - 2),
&regval);
*val = (regval & ZEN_CCD_TEMP_MASK) * 125 - 49000;
break;
default:
return -EOPNOTSUPP;
}
break;
case hwmon_temp_max:
*val = 70 * 1000;
break;
case hwmon_temp_crit:
data->read_htcreg(data->pdev, &regval);
*val = ((regval >> 16) & 0x7f) * 500 + 52000;
break;
case hwmon_temp_crit_hyst:
data->read_htcreg(data->pdev, &regval);
*val = (((regval >> 16) & 0x7f)
- ((regval >> 24) & 0xf)) * 500 + 52000;
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
switch (type) {
case hwmon_temp:
return k10temp_read_temp(dev, attr, channel, val);
default:
return -EOPNOTSUPP;
}
}
static umode_t k10temp_is_visible(const void *_data,
enum hwmon_sensor_types type,
u32 attr, int channel)
{
const struct k10temp_data *data = _data;
struct pci_dev *pdev = data->pdev;
u32 reg;
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
if (!HAVE_TEMP(data, channel))
return 0;
break;
case hwmon_temp_max:
if (channel || data->is_zen)
return 0;
break;
case hwmon_temp_crit:
case hwmon_temp_crit_hyst:
if (channel || !data->read_htcreg)
return 0;
pci_read_config_dword(pdev,
REG_NORTHBRIDGE_CAPABILITIES,
&reg);
if (!(reg & NB_CAP_HTC))
return 0;
data->read_htcreg(data->pdev, &reg);
if (!(reg & HTC_ENABLE))
return 0;
break;
case hwmon_temp_label:
/* Show temperature labels only on Zen CPUs */
if (!data->is_zen || !HAVE_TEMP(data, channel))
return 0;
break;
default:
return 0;
}
break;
default:
return 0;
}
return 0444;
}
static bool has_erratum_319(struct pci_dev *pdev)
{
u32 pkg_type, reg_dram_cfg;
if (boot_cpu_data.x86 != 0x10)
return false;
/*
* Erratum 319: The thermal sensor of Socket F/AM2+ processors
* may be unreliable.
*/
pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
if (pkg_type == CPUID_PKGTYPE_F)
return true;
if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
return false;
/* DDR3 memory implies socket AM3, which is good */
pci_bus_read_config_dword(pdev->bus,
PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
REG_DCT0_CONFIG_HIGH, &reg_dram_cfg);
if (reg_dram_cfg & DDR3_MODE)
return false;
/*
* Unfortunately it is possible to run a socket AM3 CPU with DDR2
* memory. We blacklist all the cores which do exist in socket AM2+
* format. It still isn't perfect, as RB-C2 cores exist in both AM2+
* and AM3 formats, but that's the best we can do.
*/
return boot_cpu_data.x86_model < 4 ||
(boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
}
static const struct hwmon_channel_info *k10temp_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_MAX |
HWMON_T_CRIT | HWMON_T_CRIT_HYST |
HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL),
NULL
};
static const struct hwmon_ops k10temp_hwmon_ops = {
.is_visible = k10temp_is_visible,
.read = k10temp_read,
.read_string = k10temp_read_labels,
};
static const struct hwmon_chip_info k10temp_chip_info = {
.ops = &k10temp_hwmon_ops,
.info = k10temp_info,
};
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
static void k10temp_get_ccd_support(struct pci_dev *pdev,
struct k10temp_data *data, int limit)
{
u32 regval;
int i;
for (i = 0; i < limit; i++) {
amd_smn_read(amd_pci_dev_to_node_id(pdev),
ZEN_CCD_TEMP(data->ccd_offset, i), &regval);
if (regval & ZEN_CCD_TEMP_VALID)
data->show_temp |= BIT(TCCD_BIT(i));
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
}
}
static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int unreliable = has_erratum_319(pdev);
struct device *dev = &pdev->dev;
struct k10temp_data *data;
struct device *hwmon_dev;
int i;
if (unreliable) {
if (!force) {
dev_err(dev,
"unreliable CPU thermal sensor; monitoring disabled\n");
return -ENODEV;
}
dev_warn(dev,
"unreliable CPU thermal sensor; check erratum 319\n");
}
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->pdev = pdev;
data->show_temp |= BIT(TCTL_BIT); /* Always show Tctl */
if (boot_cpu_data.x86 == 0x15 &&
((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
(boot_cpu_data.x86_model & 0xf0) == 0x70)) {
data->read_htcreg = read_htcreg_nb_f15;
data->read_tempreg = read_tempreg_nb_f15;
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_zen;
data->is_zen = true;
switch (boot_cpu_data.x86_model) {
case 0x1: /* Zen */
case 0x8: /* Zen+ */
case 0x11: /* Zen APU */
case 0x18: /* Zen+ APU */
data->ccd_offset = 0x154;
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
k10temp_get_ccd_support(pdev, data, 4);
break;
case 0x31: /* Zen2 Threadripper */
case 0x60: /* Renoir */
case 0x68: /* Lucienne */
case 0x71: /* Zen2 */
data->ccd_offset = 0x154;
hwmon: (k10temp) Display up to eight sets of CCD temperatures In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2020-01-23 10:41:18 +08:00
k10temp_get_ccd_support(pdev, data, 8);
break;
}
} else if (boot_cpu_data.x86 == 0x19) {
data->temp_adjust_mask = ZEN_CUR_TEMP_RANGE_SEL_MASK;
data->read_tempreg = read_tempreg_nb_zen;
data->is_zen = true;
switch (boot_cpu_data.x86_model) {
case 0x0 ... 0x1: /* Zen3 SP3/TR */
case 0x21: /* Zen3 Ryzen Desktop */
case 0x50 ... 0x5f: /* Green Sardine */
data->ccd_offset = 0x154;
k10temp_get_ccd_support(pdev, data, 8);
break;
case 0x40 ... 0x4f: /* Yellow Carp */
data->ccd_offset = 0x300;
k10temp_get_ccd_support(pdev, data, 8);
break;
case 0x10 ... 0x1f:
case 0xa0 ... 0xaf:
data->ccd_offset = 0x300;
k10temp_get_ccd_support(pdev, data, 12);
break;
}
} else {
data->read_htcreg = read_htcreg_pci;
data->read_tempreg = read_tempreg_pci;
}
for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {
const struct tctl_offset *entry = &tctl_offset_table[i];
if (boot_cpu_data.x86 == entry->model &&
strstr(boot_cpu_data.x86_model_id, entry->id)) {
data->show_temp |= BIT(TDIE_BIT); /* show Tdie */
data->temp_offset = entry->offset;
break;
}
}
hwmon_dev = devm_hwmon_device_register_with_info(dev, "k10temp", data,
&k10temp_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct pci_device_id k10temp_id_table[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M60H_DF_F3) },
hwmon: (k10temp) Add support for AMD family 17h, model 70h CPUs It would seem like model 70h is behaving in the same way as model 30h, so let's just add the new F3 PCI ID to the list of compatible devices. Unlike previous Ryzen/Threadripper, Ryzen gen 3 processors do not need temperature offsets anymore. This has been reported in the press and verified on my Ryzen 3700X by checking that the idle temperature reported by k10temp is matching the temperature reported by the firmware. Vicki Pfau sent an identical patch after I checked that no-one had written this patch. I would have been happy about dropping my patch but unlike for his patch series, I had already Cc:ed the x86 people and they already reviewed the changes. Since Vicki has not answered to any email after his initial series, let's assume she is on vacation and let's avoid duplication of reviews from the maintainers and merge my series. To acknowledge Vicki's anteriority, I added her S-o-b to the patch. v2, suggested by Guenter Roeck and Brian Woods: - rename from 71h to 70h Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Marcel Bocu <marcel.p.bocu@gmail.com> Tested-by: Marcel Bocu <marcel.p.bocu@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: "Woods, Brian" <Brian.Woods@amd.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20190722174653.2391-1-marcel.p.bocu@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-07-23 01:46:53 +08:00
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M10H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M40H_DF_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_19H_M50H_DF_F3) },
{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
static struct pci_driver k10temp_driver = {
.name = "k10temp",
.id_table = k10temp_id_table,
.probe = k10temp_probe,
};
module_pci_driver(k10temp_driver);