License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2015-12-15 23:39:39 +08:00
|
|
|
#include <subcmd/parse-options.h>
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
#include "evsel.h"
|
|
|
|
#include "cgroup.h"
|
|
|
|
#include "evlist.h"
|
2020-09-24 20:44:53 +08:00
|
|
|
#include "rblist.h"
|
|
|
|
#include "metricgroup.h"
|
|
|
|
#include "stat.h"
|
2019-07-04 22:32:27 +08:00
|
|
|
#include <linux/zalloc.h>
|
2018-01-23 03:42:16 +08:00
|
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/stat.h>
|
2021-06-25 15:18:24 +08:00
|
|
|
#include <sys/statfs.h>
|
2018-01-23 03:42:16 +08:00
|
|
|
#include <fcntl.h>
|
2019-08-31 01:45:20 +08:00
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
2020-01-27 18:00:31 +08:00
|
|
|
#include <api/fs/fs.h>
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
#include <ftw.h>
|
|
|
|
#include <regex.h>
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
|
|
|
|
int nr_cgroups;
|
2021-07-02 05:12:27 +08:00
|
|
|
bool cgrp_event_expanded;
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
/* used to match cgroup name with patterns */
|
|
|
|
struct cgroup_name {
|
|
|
|
struct list_head list;
|
|
|
|
bool used;
|
|
|
|
char name[];
|
|
|
|
};
|
|
|
|
static LIST_HEAD(cgroup_list);
|
|
|
|
|
2018-03-07 02:53:22 +08:00
|
|
|
static int open_cgroup(const char *name)
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
{
|
2011-11-16 22:55:59 +08:00
|
|
|
char path[PATH_MAX + 1];
|
|
|
|
char mnt[PATH_MAX + 1];
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
int fd;
|
|
|
|
|
|
|
|
|
2020-01-27 18:00:31 +08:00
|
|
|
if (cgroupfs_find_mountpoint(mnt, PATH_MAX + 1, "perf_event"))
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
return -1;
|
|
|
|
|
2018-03-19 16:29:01 +08:00
|
|
|
scnprintf(path, PATH_MAX, "%s/%s", mnt, name);
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
|
|
|
|
fd = open(path, O_RDONLY);
|
|
|
|
if (fd == -1)
|
|
|
|
fprintf(stderr, "no access to cgroup %s\n", path);
|
|
|
|
|
|
|
|
return fd;
|
|
|
|
}
|
|
|
|
|
2021-06-25 15:18:23 +08:00
|
|
|
#ifdef HAVE_FILE_HANDLE
|
|
|
|
int read_cgroup_id(struct cgroup *cgrp)
|
|
|
|
{
|
|
|
|
char path[PATH_MAX + 1];
|
|
|
|
char mnt[PATH_MAX + 1];
|
|
|
|
struct {
|
|
|
|
struct file_handle fh;
|
|
|
|
uint64_t cgroup_id;
|
|
|
|
} handle;
|
|
|
|
int mount_id;
|
|
|
|
|
|
|
|
if (cgroupfs_find_mountpoint(mnt, PATH_MAX + 1, "perf_event"))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
scnprintf(path, PATH_MAX, "%s/%s", mnt, cgrp->name);
|
|
|
|
|
|
|
|
handle.fh.handle_bytes = sizeof(handle.cgroup_id);
|
|
|
|
if (name_to_handle_at(AT_FDCWD, path, &handle.fh, &mount_id, 0) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
cgrp->id = handle.cgroup_id;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* HAVE_FILE_HANDLE */
|
|
|
|
|
2021-06-25 15:18:24 +08:00
|
|
|
#ifndef CGROUP2_SUPER_MAGIC
|
|
|
|
#define CGROUP2_SUPER_MAGIC 0x63677270
|
|
|
|
#endif
|
|
|
|
|
|
|
|
int cgroup_is_v2(const char *subsys)
|
|
|
|
{
|
|
|
|
char mnt[PATH_MAX + 1];
|
|
|
|
struct statfs stbuf;
|
|
|
|
|
|
|
|
if (cgroupfs_find_mountpoint(mnt, PATH_MAX + 1, subsys))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
if (statfs(mnt, &stbuf) < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
return (stbuf.f_type == CGROUP2_SUPER_MAGIC);
|
|
|
|
}
|
|
|
|
|
2019-07-21 19:23:52 +08:00
|
|
|
static struct cgroup *evlist__find_cgroup(struct evlist *evlist, const char *str)
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
{
|
2019-07-21 19:23:51 +08:00
|
|
|
struct evsel *counter;
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
/*
|
|
|
|
* check if cgrp is already defined, if so we reuse it
|
|
|
|
*/
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(evlist, counter) {
|
2018-03-06 21:18:40 +08:00
|
|
|
if (!counter->cgrp)
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
continue;
|
2018-05-24 22:29:07 +08:00
|
|
|
if (!strcmp(counter->cgrp->name, str))
|
|
|
|
return cgroup__get(counter->cgrp);
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
}
|
|
|
|
|
2018-05-24 22:29:07 +08:00
|
|
|
return NULL;
|
2018-03-06 21:27:00 +08:00
|
|
|
}
|
|
|
|
|
2020-09-24 20:44:54 +08:00
|
|
|
static struct cgroup *cgroup__new(const char *name, bool do_open)
|
2018-03-06 21:33:04 +08:00
|
|
|
{
|
|
|
|
struct cgroup *cgroup = zalloc(sizeof(*cgroup));
|
|
|
|
|
|
|
|
if (cgroup != NULL) {
|
|
|
|
refcount_set(&cgroup->refcnt, 1);
|
|
|
|
|
2018-03-07 02:53:22 +08:00
|
|
|
cgroup->name = strdup(name);
|
|
|
|
if (!cgroup->name)
|
|
|
|
goto out_err;
|
2020-09-24 20:44:54 +08:00
|
|
|
|
|
|
|
if (do_open) {
|
|
|
|
cgroup->fd = open_cgroup(name);
|
|
|
|
if (cgroup->fd == -1)
|
|
|
|
goto out_free_name;
|
|
|
|
} else {
|
|
|
|
cgroup->fd = -1;
|
|
|
|
}
|
2018-03-06 21:33:04 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return cgroup;
|
2018-03-07 02:53:22 +08:00
|
|
|
|
|
|
|
out_free_name:
|
2019-07-04 23:06:20 +08:00
|
|
|
zfree(&cgroup->name);
|
2018-03-06 21:33:04 +08:00
|
|
|
out_err:
|
|
|
|
free(cgroup);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2019-07-21 19:23:52 +08:00
|
|
|
struct cgroup *evlist__findnew_cgroup(struct evlist *evlist, const char *name)
|
2018-03-07 02:27:08 +08:00
|
|
|
{
|
|
|
|
struct cgroup *cgroup = evlist__find_cgroup(evlist, name);
|
|
|
|
|
2020-09-24 20:44:54 +08:00
|
|
|
return cgroup ?: cgroup__new(name, true);
|
2018-03-07 02:27:08 +08:00
|
|
|
}
|
|
|
|
|
2019-07-21 19:23:52 +08:00
|
|
|
static int add_cgroup(struct evlist *evlist, const char *str)
|
2018-03-06 21:27:00 +08:00
|
|
|
{
|
2019-07-21 19:23:51 +08:00
|
|
|
struct evsel *counter;
|
2018-03-07 02:27:08 +08:00
|
|
|
struct cgroup *cgrp = evlist__findnew_cgroup(evlist, str);
|
2018-03-06 21:27:00 +08:00
|
|
|
int n;
|
|
|
|
|
2018-03-07 02:27:08 +08:00
|
|
|
if (!cgrp)
|
|
|
|
return -1;
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
/*
|
|
|
|
* find corresponding event
|
|
|
|
* if add cgroup N, then need to find event N
|
|
|
|
*/
|
|
|
|
n = 0;
|
2016-06-23 22:26:15 +08:00
|
|
|
evlist__for_each_entry(evlist, counter) {
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
if (n == nr_cgroups)
|
|
|
|
goto found;
|
|
|
|
n++;
|
|
|
|
}
|
|
|
|
|
2018-03-06 21:10:45 +08:00
|
|
|
cgroup__put(cgrp);
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
return -1;
|
|
|
|
found:
|
|
|
|
counter->cgrp = cgrp;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-03-06 21:08:10 +08:00
|
|
|
static void cgroup__delete(struct cgroup *cgroup)
|
|
|
|
{
|
2020-04-17 21:23:26 +08:00
|
|
|
if (cgroup->fd >= 0)
|
|
|
|
close(cgroup->fd);
|
2018-03-06 21:08:10 +08:00
|
|
|
zfree(&cgroup->name);
|
|
|
|
free(cgroup);
|
|
|
|
}
|
|
|
|
|
2018-03-06 21:10:45 +08:00
|
|
|
void cgroup__put(struct cgroup *cgrp)
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
{
|
2017-02-21 23:34:55 +08:00
|
|
|
if (cgrp && refcount_dec_and_test(&cgrp->refcnt)) {
|
2018-03-06 21:08:10 +08:00
|
|
|
cgroup__delete(cgrp);
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-03-06 21:18:40 +08:00
|
|
|
struct cgroup *cgroup__get(struct cgroup *cgroup)
|
|
|
|
{
|
|
|
|
if (cgroup)
|
|
|
|
refcount_inc(&cgroup->refcnt);
|
|
|
|
return cgroup;
|
|
|
|
}
|
|
|
|
|
2019-07-21 19:23:51 +08:00
|
|
|
static void evsel__set_default_cgroup(struct evsel *evsel, struct cgroup *cgroup)
|
2018-03-07 02:48:10 +08:00
|
|
|
{
|
|
|
|
if (evsel->cgrp == NULL)
|
|
|
|
evsel->cgrp = cgroup__get(cgroup);
|
|
|
|
}
|
|
|
|
|
2019-07-21 19:23:52 +08:00
|
|
|
void evlist__set_default_cgroup(struct evlist *evlist, struct cgroup *cgroup)
|
2018-03-07 02:48:10 +08:00
|
|
|
{
|
2019-07-21 19:23:51 +08:00
|
|
|
struct evsel *evsel;
|
2018-03-07 02:48:10 +08:00
|
|
|
|
|
|
|
evlist__for_each_entry(evlist, evsel)
|
|
|
|
evsel__set_default_cgroup(evsel, cgroup);
|
|
|
|
}
|
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
/* helper function for ftw() in match_cgroups and list_cgroups */
|
|
|
|
static int add_cgroup_name(const char *fpath, const struct stat *sb __maybe_unused,
|
2021-02-09 02:11:57 +08:00
|
|
|
int typeflag, struct FTW *ftwbuf __maybe_unused)
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
{
|
|
|
|
struct cgroup_name *cn;
|
|
|
|
|
|
|
|
if (typeflag != FTW_D)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
cn = malloc(sizeof(*cn) + strlen(fpath) + 1);
|
|
|
|
if (cn == NULL)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
cn->used = false;
|
|
|
|
strcpy(cn->name, fpath);
|
|
|
|
|
|
|
|
list_add_tail(&cn->list, &cgroup_list);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-04 14:44:02 +08:00
|
|
|
static int check_and_add_cgroup_name(const char *fpath)
|
|
|
|
{
|
|
|
|
struct cgroup_name *cn;
|
|
|
|
|
|
|
|
list_for_each_entry(cn, &cgroup_list, list) {
|
|
|
|
if (!strcmp(cn->name, fpath))
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* pretend if it's added by ftw() */
|
|
|
|
return add_cgroup_name(fpath, NULL, FTW_D, NULL);
|
|
|
|
}
|
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
static void release_cgroup_list(void)
|
|
|
|
{
|
|
|
|
struct cgroup_name *cn;
|
|
|
|
|
|
|
|
while (!list_empty(&cgroup_list)) {
|
|
|
|
cn = list_first_entry(&cgroup_list, struct cgroup_name, list);
|
|
|
|
list_del(&cn->list);
|
|
|
|
free(cn);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* collect given cgroups only */
|
|
|
|
static int list_cgroups(const char *str)
|
|
|
|
{
|
|
|
|
const char *p, *e, *eos = str + strlen(str);
|
|
|
|
struct cgroup_name *cn;
|
|
|
|
char *s;
|
|
|
|
|
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-04 14:44:02 +08:00
|
|
|
/* use given name as is when no regex is given */
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
for (;;) {
|
|
|
|
p = strchr(str, ',');
|
|
|
|
e = p ? p : eos;
|
|
|
|
|
|
|
|
if (e - str) {
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
s = strndup(str, e - str);
|
|
|
|
if (!s)
|
|
|
|
return -1;
|
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-04 14:44:02 +08:00
|
|
|
|
|
|
|
ret = check_and_add_cgroup_name(s);
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
free(s);
|
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-04 14:44:02 +08:00
|
|
|
if (ret < 0)
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
return -1;
|
|
|
|
} else {
|
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
The --for-each-cgroup can have the same cgroup multiple times, but this
confuses BPF counters (since they have the same cgroup id), making only
the last cgroup events to be counted.
Let's check the cgroup name before adding a new entry to the cgroups
list.
Before:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
<not counted> msec cpu-clock /
<not counted> context-switches /
<not counted> cpu-migrations /
<not counted> page-faults /
<not counted> cycles /
<not counted> instructions /
<not counted> branches /
<not counted> branch-misses /
8,016.04 msec cpu-clock / # 7.998 CPUs utilized
6,152 context-switches / # 767.461 /sec
250 cpu-migrations / # 31.187 /sec
442 page-faults / # 55.139 /sec
613,111,487 cycles / # 0.076 GHz
280,599,604 instructions / # 0.46 insn per cycle
57,692,724 branches / # 7.197 M/sec
3,385,168 branch-misses / # 5.87% of all branches
1.002220125 seconds time elapsed
After it becomes similar to the non-BPF mode:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Performance counter stats for 'system wide':
8,013.38 msec cpu-clock / # 7.998 CPUs utilized
6,859 context-switches / # 855.944 /sec
334 cpu-migrations / # 41.680 /sec
345 page-faults / # 43.053 /sec
782,326,119 cycles / # 0.098 GHz
471,645,724 instructions / # 0.60 insn per cycle
94,963,430 branches / # 11.851 M/sec
3,685,511 branch-misses / # 3.88% of all branches
1.001864539 seconds time elapsed
Committer notes:
As a reminder, to test with BPF counters one has to use BUILD_BPF_SKEL=1
in the make command line and have clang/llvm installed when building
perf, otherwise the --bpf-counters option will not be available:
# perf stat -a --bpf-counters --for-each-cgroup /,/ sleep 1
Error: unknown option `bpf-counters'
Usage: perf stat [<options>] [<command>]
-a, --all-cpus system-wide collection from all CPUs
<SNIP>
#
Fixes: bb1c15b60b981d10 ("perf stat: Support regex pattern in --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20230104064402.1551516-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-04 14:44:02 +08:00
|
|
|
if (check_and_add_cgroup_name("/") < 0)
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!p)
|
|
|
|
break;
|
|
|
|
str = p+1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* these groups will be used */
|
|
|
|
list_for_each_entry(cn, &cgroup_list, list)
|
|
|
|
cn->used = true;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* collect all cgroups first and then match with the pattern */
|
|
|
|
static int match_cgroups(const char *str)
|
|
|
|
{
|
|
|
|
char mnt[PATH_MAX];
|
|
|
|
const char *p, *e, *eos = str + strlen(str);
|
|
|
|
struct cgroup_name *cn;
|
|
|
|
regex_t reg;
|
|
|
|
int prefix_len;
|
|
|
|
char *s;
|
|
|
|
|
|
|
|
if (cgroupfs_find_mountpoint(mnt, sizeof(mnt), "perf_event"))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
/* cgroup_name will have a full path, skip the root directory */
|
|
|
|
prefix_len = strlen(mnt);
|
|
|
|
|
|
|
|
/* collect all cgroups in the cgroup_list */
|
2021-02-09 02:11:57 +08:00
|
|
|
if (nftw(mnt, add_cgroup_name, 20, 0) < 0)
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
p = strchr(str, ',');
|
|
|
|
e = p ? p : eos;
|
|
|
|
|
|
|
|
/* allow empty cgroups, i.e., skip */
|
|
|
|
if (e - str) {
|
|
|
|
/* termination added */
|
|
|
|
s = strndup(str, e - str);
|
|
|
|
if (!s)
|
|
|
|
return -1;
|
|
|
|
if (regcomp(®, s, REG_NOSUB)) {
|
|
|
|
free(s);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* check cgroup name with the pattern */
|
|
|
|
list_for_each_entry(cn, &cgroup_list, list) {
|
|
|
|
char *name = cn->name + prefix_len;
|
|
|
|
|
|
|
|
if (name[0] == '/' && name[1])
|
|
|
|
name++;
|
|
|
|
if (!regexec(®, name, 0, NULL, 0))
|
|
|
|
cn->used = true;
|
|
|
|
}
|
|
|
|
regfree(®);
|
|
|
|
free(s);
|
|
|
|
} else {
|
|
|
|
/* first entry to root cgroup */
|
|
|
|
cn = list_first_entry(&cgroup_list, struct cgroup_name,
|
|
|
|
list);
|
|
|
|
cn->used = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!p)
|
|
|
|
break;
|
|
|
|
str = p+1;
|
|
|
|
}
|
|
|
|
return prefix_len;
|
|
|
|
}
|
|
|
|
|
2018-03-06 20:31:53 +08:00
|
|
|
int parse_cgroups(const struct option *opt, const char *str,
|
2012-09-11 06:15:03 +08:00
|
|
|
int unset __maybe_unused)
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
{
|
2019-07-21 19:23:52 +08:00
|
|
|
struct evlist *evlist = *(struct evlist **)opt->value;
|
2019-07-21 19:23:51 +08:00
|
|
|
struct evsel *counter;
|
2018-03-06 20:51:48 +08:00
|
|
|
struct cgroup *cgrp = NULL;
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
const char *p, *e, *eos = str + strlen(str);
|
|
|
|
char *s;
|
2018-01-29 23:48:09 +08:00
|
|
|
int ret, i;
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
|
2019-07-21 19:24:23 +08:00
|
|
|
if (list_empty(&evlist->core.entries)) {
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
fprintf(stderr, "must define events before cgroups\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
p = strchr(str, ',');
|
|
|
|
e = p ? p : eos;
|
|
|
|
|
|
|
|
/* allow empty cgroups, i.e., skip */
|
|
|
|
if (e - str) {
|
|
|
|
/* termination added */
|
|
|
|
s = strndup(str, e - str);
|
|
|
|
if (!s)
|
|
|
|
return -1;
|
|
|
|
ret = add_cgroup(evlist, s);
|
2018-03-07 02:53:22 +08:00
|
|
|
free(s);
|
|
|
|
if (ret)
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
/* nr_cgroups is increased een for empty cgroups */
|
|
|
|
nr_cgroups++;
|
|
|
|
if (!p)
|
|
|
|
break;
|
|
|
|
str = p+1;
|
|
|
|
}
|
2018-01-29 23:48:09 +08:00
|
|
|
/* for the case one cgroup combine to multiple events */
|
|
|
|
i = 0;
|
|
|
|
if (nr_cgroups == 1) {
|
|
|
|
evlist__for_each_entry(evlist, counter) {
|
|
|
|
if (i == 0)
|
|
|
|
cgrp = counter->cgrp;
|
|
|
|
else {
|
|
|
|
counter->cgrp = cgrp;
|
|
|
|
refcount_inc(&cgrp->refcnt);
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
}
|
perf tool: Add cgroup support
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14 17:20:01 +08:00
|
|
|
return 0;
|
|
|
|
}
|
2020-03-25 20:45:31 +08:00
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
static bool has_pattern_string(const char *str)
|
|
|
|
{
|
|
|
|
return !!strpbrk(str, "{}[]()|*+?^$");
|
|
|
|
}
|
|
|
|
|
2020-09-24 20:44:53 +08:00
|
|
|
int evlist__expand_cgroup(struct evlist *evlist, const char *str,
|
2020-09-24 20:44:54 +08:00
|
|
|
struct rblist *metric_events, bool open_cgroup)
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
{
|
|
|
|
struct evlist *orig_list, *tmp_list;
|
|
|
|
struct evsel *pos, *evsel, *leader;
|
2020-09-24 20:44:53 +08:00
|
|
|
struct rblist orig_metric_events;
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
struct cgroup *cgrp = NULL;
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
struct cgroup_name *cn;
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
int ret = -1;
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
int prefix_len;
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
|
|
|
if (evlist->core.nr_entries == 0) {
|
|
|
|
fprintf(stderr, "must define events before cgroups\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
orig_list = evlist__new();
|
|
|
|
tmp_list = evlist__new();
|
|
|
|
if (orig_list == NULL || tmp_list == NULL) {
|
|
|
|
fprintf(stderr, "memory allocation failed\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* save original events and init evlist */
|
2020-12-01 01:52:44 +08:00
|
|
|
evlist__splice_list_tail(orig_list, &evlist->core.entries);
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
evlist->core.nr_entries = 0;
|
|
|
|
|
2020-09-24 20:44:53 +08:00
|
|
|
if (metric_events) {
|
|
|
|
orig_metric_events = *metric_events;
|
|
|
|
rblist__init(metric_events);
|
|
|
|
} else {
|
|
|
|
rblist__init(&orig_metric_events);
|
|
|
|
}
|
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
if (has_pattern_string(str))
|
|
|
|
prefix_len = match_cgroups(str);
|
|
|
|
else
|
|
|
|
prefix_len = list_cgroups(str);
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
if (prefix_len < 0)
|
|
|
|
goto out_err;
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
list_for_each_entry(cn, &cgroup_list, list) {
|
|
|
|
char *name;
|
|
|
|
|
|
|
|
if (!cn->used)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* cgroup_name might have a full path, skip the prefix */
|
|
|
|
name = cn->name + prefix_len;
|
|
|
|
if (name[0] == '/' && name[1])
|
|
|
|
name++;
|
|
|
|
cgrp = cgroup__new(name, open_cgroup);
|
|
|
|
if (cgrp == NULL)
|
|
|
|
goto out_err;
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
|
|
|
leader = NULL;
|
|
|
|
evlist__for_each_entry(orig_list, pos) {
|
|
|
|
evsel = evsel__clone(pos);
|
|
|
|
if (evsel == NULL)
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
cgroup__put(evsel->cgrp);
|
|
|
|
evsel->cgrp = cgroup__get(cgrp);
|
|
|
|
|
|
|
|
if (evsel__is_group_leader(pos))
|
|
|
|
leader = evsel;
|
2021-07-06 23:17:00 +08:00
|
|
|
evsel__set_leader(evsel, leader);
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
|
|
|
evlist__add(tmp_list, evsel);
|
|
|
|
}
|
|
|
|
/* cgroup__new() has a refcount, release it here */
|
|
|
|
cgroup__put(cgrp);
|
|
|
|
nr_cgroups++;
|
|
|
|
|
2020-09-24 20:44:53 +08:00
|
|
|
if (metric_events) {
|
|
|
|
if (metricgroup__copy_metric_events(tmp_list, cgrp,
|
|
|
|
metric_events,
|
|
|
|
&orig_metric_events) < 0)
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
goto out_err;
|
2020-09-24 20:44:53 +08:00
|
|
|
}
|
|
|
|
|
2020-12-01 01:52:44 +08:00
|
|
|
evlist__splice_list_tail(evlist, &tmp_list->core.entries);
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
tmp_list->core.nr_entries = 0;
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
}
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
if (list_empty(&evlist->core.entries)) {
|
|
|
|
fprintf(stderr, "no cgroup matched: %s\n", str);
|
|
|
|
goto out_err;
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
}
|
|
|
|
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
ret = 0;
|
2021-07-02 05:12:27 +08:00
|
|
|
cgrp_event_expanded = true;
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
out_err:
|
|
|
|
evlist__delete(orig_list);
|
|
|
|
evlist__delete(tmp_list);
|
2020-09-24 20:44:53 +08:00
|
|
|
rblist__exit(&orig_metric_events);
|
perf stat: Support regex pattern in --for-each-cgroup
To make the command line even more compact with cgroups, support regex
pattern matching in cgroup names.
$ perf stat -a -e cpu-clock,cycles --for-each-cgroup ^foo sleep 1
3,000.73 msec cpu-clock foo # 2.998 CPUs utilized
12,530,992,699 cycles foo # 7.517 GHz (100.00%)
1,000.61 msec cpu-clock foo/bar # 1.000 CPUs utilized
4,178,529,579 cycles foo/bar # 2.506 GHz (100.00%)
1,000.03 msec cpu-clock foo/baz # 0.999 CPUs utilized
4,176,104,315 cycles foo/baz # 2.505 GHz (100.00%)
1.000892614 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201027072855.655449-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-27 15:28:55 +08:00
|
|
|
release_cgroup_list();
|
perf stat: Add --for-each-cgroup option
The --for-each-cgroup option is a syntax sugar to monitor large number
of cgroups easily. Current command line requires to list all the events
and cgroups even if users want to monitor same events for each cgroup.
This patch addresses that usage by copying given events for each cgroup
on user's behalf.
For instance, if they want to monitor 6 events for 200 cgroups each they
should write 1200 event names (with -e) AND 1200 cgroup names (with -G)
on the command line. But with this change, they can just specify 6
events and 200 cgroups with a new option.
A simpler example below: It wants to measure 3 events for 2 cgroups ('A'
and 'B'). The result is that total 6 events are counted like below.
$ perf stat -a -e cpu-clock,cycles,instructions --for-each-cgroup A,B sleep 1
Performance counter stats for 'system wide':
988.18 msec cpu-clock A # 0.987 CPUs utilized
3,153,761,702 cycles A # 3.200 GHz (100.00%)
8,067,769,847 instructions A # 2.57 insn per cycle (100.00%)
982.71 msec cpu-clock B # 0.982 CPUs utilized
3,136,093,298 cycles B # 3.182 GHz (99.99%)
8,109,619,327 instructions B # 2.58 insn per cycle (99.99%)
1.001228054 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200924124455.336326-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-09-24 20:44:52 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2020-03-25 20:45:31 +08:00
|
|
|
static struct cgroup *__cgroup__findnew(struct rb_root *root, uint64_t id,
|
|
|
|
bool create, const char *path)
|
|
|
|
{
|
|
|
|
struct rb_node **p = &root->rb_node;
|
|
|
|
struct rb_node *parent = NULL;
|
|
|
|
struct cgroup *cgrp;
|
|
|
|
|
|
|
|
while (*p != NULL) {
|
|
|
|
parent = *p;
|
|
|
|
cgrp = rb_entry(parent, struct cgroup, node);
|
|
|
|
|
|
|
|
if (cgrp->id == id)
|
|
|
|
return cgrp;
|
|
|
|
|
|
|
|
if (cgrp->id < id)
|
|
|
|
p = &(*p)->rb_left;
|
|
|
|
else
|
|
|
|
p = &(*p)->rb_right;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!create)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
cgrp = malloc(sizeof(*cgrp));
|
|
|
|
if (cgrp == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
cgrp->name = strdup(path);
|
|
|
|
if (cgrp->name == NULL) {
|
|
|
|
free(cgrp);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
cgrp->fd = -1;
|
|
|
|
cgrp->id = id;
|
|
|
|
refcount_set(&cgrp->refcnt, 1);
|
|
|
|
|
|
|
|
rb_link_node(&cgrp->node, parent, p);
|
|
|
|
rb_insert_color(&cgrp->node, root);
|
|
|
|
|
|
|
|
return cgrp;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct cgroup *cgroup__findnew(struct perf_env *env, uint64_t id,
|
|
|
|
const char *path)
|
|
|
|
{
|
|
|
|
struct cgroup *cgrp;
|
|
|
|
|
|
|
|
down_write(&env->cgroups.lock);
|
|
|
|
cgrp = __cgroup__findnew(&env->cgroups.tree, id, true, path);
|
|
|
|
up_write(&env->cgroups.lock);
|
|
|
|
return cgrp;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct cgroup *cgroup__find(struct perf_env *env, uint64_t id)
|
|
|
|
{
|
|
|
|
struct cgroup *cgrp;
|
|
|
|
|
|
|
|
down_read(&env->cgroups.lock);
|
|
|
|
cgrp = __cgroup__findnew(&env->cgroups.tree, id, false, NULL);
|
|
|
|
up_read(&env->cgroups.lock);
|
|
|
|
return cgrp;
|
|
|
|
}
|
|
|
|
|
|
|
|
void perf_env__purge_cgroups(struct perf_env *env)
|
|
|
|
{
|
|
|
|
struct rb_node *node;
|
|
|
|
struct cgroup *cgrp;
|
|
|
|
|
|
|
|
down_write(&env->cgroups.lock);
|
|
|
|
while (!RB_EMPTY_ROOT(&env->cgroups.tree)) {
|
|
|
|
node = rb_first(&env->cgroups.tree);
|
|
|
|
cgrp = rb_entry(node, struct cgroup, node);
|
|
|
|
|
|
|
|
rb_erase(node, &env->cgroups.tree);
|
|
|
|
cgroup__put(cgrp);
|
|
|
|
}
|
|
|
|
up_write(&env->cgroups.lock);
|
|
|
|
}
|