linux/drivers/media/video/cx88/cx88-blackbird.c

1348 lines
38 KiB
C
Raw Normal View History

/*
*
* Support for a cx23416 mpeg encoder via cx2388x host port.
* "blackbird" reference design.
*
* (c) 2004 Jelle Foks <jelle@foks.8m.com>
* (c) 2004 Gerd Knorr <kraxel@bytesex.org>
*
* (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org>
* - video_ioctl2 conversion
*
* Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <media/v4l2-common.h>
#include <media/cx2341x.h>
#include "cx88.h"
MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards");
MODULE_AUTHOR("Jelle Foks <jelle@foks.8m.com>, Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
static unsigned int mpegbufs = 32;
module_param(mpegbufs,int,0644);
MODULE_PARM_DESC(mpegbufs,"number of mpeg buffers, range 2-32");
static unsigned int debug = 0;
module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages [blackbird]");
#define dprintk(level,fmt, arg...) if (debug >= level) \
printk(KERN_DEBUG "%s/2-bb: " fmt, dev->core->name , ## arg)
/* ------------------------------------------------------------------ */
#define BLACKBIRD_FIRM_IMAGE_SIZE 376836
/* defines below are from ivtv-driver.h */
#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF
/* Firmware API commands */
#define IVTV_API_STD_TIMEOUT 500
enum blackbird_capture_type {
BLACKBIRD_MPEG_CAPTURE,
BLACKBIRD_RAW_CAPTURE,
BLACKBIRD_RAW_PASSTHRU_CAPTURE
};
enum blackbird_capture_bits {
BLACKBIRD_RAW_BITS_NONE = 0x00,
BLACKBIRD_RAW_BITS_YUV_CAPTURE = 0x01,
BLACKBIRD_RAW_BITS_PCM_CAPTURE = 0x02,
BLACKBIRD_RAW_BITS_VBI_CAPTURE = 0x04,
BLACKBIRD_RAW_BITS_PASSTHRU_CAPTURE = 0x08,
BLACKBIRD_RAW_BITS_TO_HOST_CAPTURE = 0x10
};
enum blackbird_capture_end {
BLACKBIRD_END_AT_GOP, /* stop at the end of gop, generate irq */
BLACKBIRD_END_NOW, /* stop immediately, no irq */
};
enum blackbird_framerate {
BLACKBIRD_FRAMERATE_NTSC_30, /* NTSC: 30fps */
BLACKBIRD_FRAMERATE_PAL_25 /* PAL: 25fps */
};
enum blackbird_stream_port {
BLACKBIRD_OUTPUT_PORT_MEMORY,
BLACKBIRD_OUTPUT_PORT_STREAMING,
BLACKBIRD_OUTPUT_PORT_SERIAL
};
enum blackbird_data_xfer_status {
BLACKBIRD_MORE_BUFFERS_FOLLOW,
BLACKBIRD_LAST_BUFFER,
};
enum blackbird_picture_mask {
BLACKBIRD_PICTURE_MASK_NONE,
BLACKBIRD_PICTURE_MASK_I_FRAMES,
BLACKBIRD_PICTURE_MASK_I_P_FRAMES = 0x3,
BLACKBIRD_PICTURE_MASK_ALL_FRAMES = 0x7,
};
enum blackbird_vbi_mode_bits {
BLACKBIRD_VBI_BITS_SLICED,
BLACKBIRD_VBI_BITS_RAW,
};
enum blackbird_vbi_insertion_bits {
BLACKBIRD_VBI_BITS_INSERT_IN_XTENSION_USR_DATA,
BLACKBIRD_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1,
BLACKBIRD_VBI_BITS_SEPARATE_STREAM = 0x2 << 1,
BLACKBIRD_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1,
BLACKBIRD_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1,
};
enum blackbird_dma_unit {
BLACKBIRD_DMA_BYTES,
BLACKBIRD_DMA_FRAMES,
};
enum blackbird_dma_transfer_status_bits {
BLACKBIRD_DMA_TRANSFER_BITS_DONE = 0x01,
BLACKBIRD_DMA_TRANSFER_BITS_ERROR = 0x04,
BLACKBIRD_DMA_TRANSFER_BITS_LL_ERROR = 0x10,
};
enum blackbird_pause {
BLACKBIRD_PAUSE_ENCODING,
BLACKBIRD_RESUME_ENCODING,
};
enum blackbird_copyright {
BLACKBIRD_COPYRIGHT_OFF,
BLACKBIRD_COPYRIGHT_ON,
};
enum blackbird_notification_type {
BLACKBIRD_NOTIFICATION_REFRESH,
};
enum blackbird_notification_status {
BLACKBIRD_NOTIFICATION_OFF,
BLACKBIRD_NOTIFICATION_ON,
};
enum blackbird_notification_mailbox {
BLACKBIRD_NOTIFICATION_NO_MAILBOX = -1,
};
enum blackbird_field1_lines {
BLACKBIRD_FIELD1_SAA7114 = 0x00EF, /* 239 */
BLACKBIRD_FIELD1_SAA7115 = 0x00F0, /* 240 */
BLACKBIRD_FIELD1_MICRONAS = 0x0105, /* 261 */
};
enum blackbird_field2_lines {
BLACKBIRD_FIELD2_SAA7114 = 0x00EF, /* 239 */
BLACKBIRD_FIELD2_SAA7115 = 0x00F0, /* 240 */
BLACKBIRD_FIELD2_MICRONAS = 0x0106, /* 262 */
};
enum blackbird_custom_data_type {
BLACKBIRD_CUSTOM_EXTENSION_USR_DATA,
BLACKBIRD_CUSTOM_PRIVATE_PACKET,
};
enum blackbird_mute {
BLACKBIRD_UNMUTE,
BLACKBIRD_MUTE,
};
enum blackbird_mute_video_mask {
BLACKBIRD_MUTE_VIDEO_V_MASK = 0x0000FF00,
BLACKBIRD_MUTE_VIDEO_U_MASK = 0x00FF0000,
BLACKBIRD_MUTE_VIDEO_Y_MASK = 0xFF000000,
};
enum blackbird_mute_video_shift {
BLACKBIRD_MUTE_VIDEO_V_SHIFT = 8,
BLACKBIRD_MUTE_VIDEO_U_SHIFT = 16,
BLACKBIRD_MUTE_VIDEO_Y_SHIFT = 24,
};
/* Registers */
#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8 /*| IVTV_REG_OFFSET*/)
#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC /*| IVTV_REG_OFFSET*/)
#define IVTV_REG_SPU (0x9050 /*| IVTV_REG_OFFSET*/)
#define IVTV_REG_HW_BLOCKS (0x9054 /*| IVTV_REG_OFFSET*/)
#define IVTV_REG_VPU (0x9058 /*| IVTV_REG_OFFSET*/)
#define IVTV_REG_APU (0xA064 /*| IVTV_REG_OFFSET*/)
/* ------------------------------------------------------------------ */
static void host_setup(struct cx88_core *core)
{
/* toggle reset of the host */
cx_write(MO_GPHST_SOFT_RST, 1);
udelay(100);
cx_write(MO_GPHST_SOFT_RST, 0);
udelay(100);
/* host port setup */
cx_write(MO_GPHST_WSC, 0x44444444U);
cx_write(MO_GPHST_XFR, 0);
cx_write(MO_GPHST_WDTH, 15);
cx_write(MO_GPHST_HDSHK, 0);
cx_write(MO_GPHST_MUX16, 0x44448888U);
cx_write(MO_GPHST_MODE, 0);
}
/* ------------------------------------------------------------------ */
#define P1_MDATA0 0x390000
#define P1_MDATA1 0x390001
#define P1_MDATA2 0x390002
#define P1_MDATA3 0x390003
#define P1_MADDR2 0x390004
#define P1_MADDR1 0x390005
#define P1_MADDR0 0x390006
#define P1_RDATA0 0x390008
#define P1_RDATA1 0x390009
#define P1_RDATA2 0x39000A
#define P1_RDATA3 0x39000B
#define P1_RADDR0 0x39000C
#define P1_RADDR1 0x39000D
#define P1_RRDWR 0x39000E
static int wait_ready_gpio0_bit1(struct cx88_core *core, u32 state)
{
unsigned long timeout = jiffies + msecs_to_jiffies(1);
u32 gpio0,need;
need = state ? 2 : 0;
for (;;) {
gpio0 = cx_read(MO_GP0_IO) & 2;
if (need == gpio0)
return 0;
if (time_after(jiffies,timeout))
return -1;
udelay(1);
}
}
static int memory_write(struct cx88_core *core, u32 address, u32 value)
{
/* Warning: address is dword address (4 bytes) */
cx_writeb(P1_MDATA0, (unsigned int)value);
cx_writeb(P1_MDATA1, (unsigned int)(value >> 8));
cx_writeb(P1_MDATA2, (unsigned int)(value >> 16));
cx_writeb(P1_MDATA3, (unsigned int)(value >> 24));
cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) | 0x40);
cx_writeb(P1_MADDR1, (unsigned int)(address >> 8));
cx_writeb(P1_MADDR0, (unsigned int)address);
cx_read(P1_MDATA0);
cx_read(P1_MADDR0);
return wait_ready_gpio0_bit1(core,1);
}
static int memory_read(struct cx88_core *core, u32 address, u32 *value)
{
int retval;
u32 val;
/* Warning: address is dword address (4 bytes) */
cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) & ~0xC0);
cx_writeb(P1_MADDR1, (unsigned int)(address >> 8));
cx_writeb(P1_MADDR0, (unsigned int)address);
cx_read(P1_MADDR0);
retval = wait_ready_gpio0_bit1(core,1);
cx_writeb(P1_MDATA3, 0);
val = (unsigned char)cx_read(P1_MDATA3) << 24;
cx_writeb(P1_MDATA2, 0);
val |= (unsigned char)cx_read(P1_MDATA2) << 16;
cx_writeb(P1_MDATA1, 0);
val |= (unsigned char)cx_read(P1_MDATA1) << 8;
cx_writeb(P1_MDATA0, 0);
val |= (unsigned char)cx_read(P1_MDATA0);
*value = val;
return retval;
}
static int register_write(struct cx88_core *core, u32 address, u32 value)
{
cx_writeb(P1_RDATA0, (unsigned int)value);
cx_writeb(P1_RDATA1, (unsigned int)(value >> 8));
cx_writeb(P1_RDATA2, (unsigned int)(value >> 16));
cx_writeb(P1_RDATA3, (unsigned int)(value >> 24));
cx_writeb(P1_RADDR0, (unsigned int)address);
cx_writeb(P1_RADDR1, (unsigned int)(address >> 8));
cx_writeb(P1_RRDWR, 1);
cx_read(P1_RDATA0);
cx_read(P1_RADDR0);
return wait_ready_gpio0_bit1(core,1);
}
static int register_read(struct cx88_core *core, u32 address, u32 *value)
{
int retval;
u32 val;
cx_writeb(P1_RADDR0, (unsigned int)address);
cx_writeb(P1_RADDR1, (unsigned int)(address >> 8));
cx_writeb(P1_RRDWR, 0);
cx_read(P1_RADDR0);
retval = wait_ready_gpio0_bit1(core,1);
val = (unsigned char)cx_read(P1_RDATA0);
val |= (unsigned char)cx_read(P1_RDATA1) << 8;
val |= (unsigned char)cx_read(P1_RDATA2) << 16;
val |= (unsigned char)cx_read(P1_RDATA3) << 24;
*value = val;
return retval;
}
/* ------------------------------------------------------------------ */
static int blackbird_mbox_func(void *priv, int command, int in, int out, u32 data[CX2341X_MBOX_MAX_DATA])
{
struct cx8802_dev *dev = priv;
unsigned long timeout;
u32 value, flag, retval;
int i;
dprintk(1,"%s: 0x%X\n", __FUNCTION__, command);
/* this may not be 100% safe if we can't read any memory location
without side effects */
memory_read(dev->core, dev->mailbox - 4, &value);
if (value != 0x12345678) {
dprintk(0, "Firmware and/or mailbox pointer not initialized or corrupted\n");
return -1;
}
memory_read(dev->core, dev->mailbox, &flag);
if (flag) {
dprintk(0, "ERROR: Mailbox appears to be in use (%x)\n", flag);
return -1;
}
flag |= 1; /* tell 'em we're working on it */
memory_write(dev->core, dev->mailbox, flag);
/* write command + args + fill remaining with zeros */
memory_write(dev->core, dev->mailbox + 1, command); /* command code */
memory_write(dev->core, dev->mailbox + 3, IVTV_API_STD_TIMEOUT); /* timeout */
for (i = 0; i < in; i++) {
memory_write(dev->core, dev->mailbox + 4 + i, data[i]);
dprintk(1, "API Input %d = %d\n", i, data[i]);
}
for (; i < CX2341X_MBOX_MAX_DATA; i++)
memory_write(dev->core, dev->mailbox + 4 + i, 0);
flag |= 3; /* tell 'em we're done writing */
memory_write(dev->core, dev->mailbox, flag);
/* wait for firmware to handle the API command */
timeout = jiffies + msecs_to_jiffies(10);
for (;;) {
memory_read(dev->core, dev->mailbox, &flag);
if (0 != (flag & 4))
break;
if (time_after(jiffies,timeout)) {
dprintk(0, "ERROR: API Mailbox timeout\n");
return -1;
}
udelay(10);
}
/* read output values */
for (i = 0; i < out; i++) {
memory_read(dev->core, dev->mailbox + 4 + i, data + i);
dprintk(1, "API Output %d = %d\n", i, data[i]);
}
memory_read(dev->core, dev->mailbox + 2, &retval);
dprintk(1, "API result = %d\n",retval);
flag = 0;
memory_write(dev->core, dev->mailbox, flag);
return retval;
}
/* ------------------------------------------------------------------ */
/* We don't need to call the API often, so using just one mailbox will probably suffice */
static int blackbird_api_cmd(struct cx8802_dev *dev, u32 command,
u32 inputcnt, u32 outputcnt, ...)
{
u32 data[CX2341X_MBOX_MAX_DATA];
va_list vargs;
int i, err;
va_start(vargs, outputcnt);
for (i = 0; i < inputcnt; i++) {
data[i] = va_arg(vargs, int);
}
err = blackbird_mbox_func(dev, command, inputcnt, outputcnt, data);
for (i = 0; i < outputcnt; i++) {
int *vptr = va_arg(vargs, int *);
*vptr = data[i];
}
va_end(vargs);
return err;
}
static int blackbird_find_mailbox(struct cx8802_dev *dev)
{
u32 signature[4]={0x12345678, 0x34567812, 0x56781234, 0x78123456};
int signaturecnt=0;
u32 value;
int i;
for (i = 0; i < BLACKBIRD_FIRM_IMAGE_SIZE; i++) {
memory_read(dev->core, i, &value);
if (value == signature[signaturecnt])
signaturecnt++;
else
signaturecnt = 0;
if (4 == signaturecnt) {
dprintk(1, "Mailbox signature found\n");
return i+1;
}
}
dprintk(0, "Mailbox signature values not found!\n");
return -1;
}
static int blackbird_load_firmware(struct cx8802_dev *dev)
{
static const unsigned char magic[8] = {
0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa
};
const struct firmware *firmware;
int i, retval = 0;
u32 value = 0;
u32 checksum = 0;
u32 *dataptr;
retval = register_write(dev->core, IVTV_REG_VPU, 0xFFFFFFED);
retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST);
retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_REFRESH, 0x80000640);
retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A);
msleep(1);
retval |= register_write(dev->core, IVTV_REG_APU, 0);
if (retval < 0)
dprintk(0, "Error with register_write\n");
retval = request_firmware(&firmware, CX2341X_FIRM_ENC_FILENAME,
&dev->pci->dev);
if (retval != 0) {
dprintk(0, "ERROR: Hotplug firmware request failed (%s).\n",
CX2341X_FIRM_ENC_FILENAME);
dprintk(0, "Please fix your hotplug setup, the board will "
"not work without firmware loaded!\n");
return -1;
}
if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
dprintk(0, "ERROR: Firmware size mismatch (have %zd, expected %d)\n",
firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
release_firmware(firmware);
return -1;
}
if (0 != memcmp(firmware->data, magic, 8)) {
dprintk(0, "ERROR: Firmware magic mismatch, wrong file?\n");
release_firmware(firmware);
return -1;
}
/* transfer to the chip */
dprintk(1,"Loading firmware ...\n");
dataptr = (u32*)firmware->data;
for (i = 0; i < (firmware->size >> 2); i++) {
value = *dataptr;
checksum += ~value;
memory_write(dev->core, i, value);
dataptr++;
}
/* read back to verify with the checksum */
for (i--; i >= 0; i--) {
memory_read(dev->core, i, &value);
checksum -= ~value;
}
if (checksum) {
dprintk(0, "ERROR: Firmware load failed (checksum mismatch).\n");
release_firmware(firmware);
return -1;
}
release_firmware(firmware);
dprintk(0, "Firmware upload successful.\n");
retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST);
retval |= register_read(dev->core, IVTV_REG_SPU, &value);
retval |= register_write(dev->core, IVTV_REG_SPU, value & 0xFFFFFFFE);
msleep(1);
retval |= register_read(dev->core, IVTV_REG_VPU, &value);
retval |= register_write(dev->core, IVTV_REG_VPU, value & 0xFFFFFFE8);
if (retval < 0)
dprintk(0, "Error with register_write\n");
return 0;
}
/**
Settings used by the windows tv app for PVR2000:
=================================================================================================================
Profile | Codec | Resolution | CBR/VBR | Video Qlty | V. Bitrate | Frmrate | Audio Codec | A. Bitrate | A. Mode
-----------------------------------------------------------------------------------------------------------------
MPEG-1 | MPEG1 | 352x288PAL | (CBR) | 1000:Optimal | 2000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo
MPEG-2 | MPEG2 | 720x576PAL | VBR | 600 :Good | 4000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo
VCD | MPEG1 | 352x288PAL | (CBR) | 1000:Optimal | 1150 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo
DVD | MPEG2 | 720x576PAL | VBR | 600 :Good | 6000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo
DB* DVD | MPEG2 | 720x576PAL | CBR | 600 :Good | 6000 Kbps | 25fps | MPG1 Layer2 | 224kbps | Stereo
=================================================================================================================
*DB: "DirectBurn"
*/
static void blackbird_codec_settings(struct cx8802_dev *dev)
{
/* assign frame size */
blackbird_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0,
dev->height, dev->width);
dev->params.width = dev->width;
dev->params.height = dev->height;
dev->params.is_50hz = (dev->core->tvnorm & V4L2_STD_625_50) != 0;
cx2341x_update(dev, blackbird_mbox_func, NULL, &dev->params);
}
static int blackbird_initialize_codec(struct cx8802_dev *dev)
{
struct cx88_core *core = dev->core;
int version;
int retval;
dprintk(1,"Initialize codec\n");
retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */
if (retval < 0) {
/* ping was not successful, reset and upload firmware */
cx_write(MO_SRST_IO, 0); /* SYS_RSTO=0 */
msleep(1);
cx_write(MO_SRST_IO, 1); /* SYS_RSTO=1 */
msleep(1);
retval = blackbird_load_firmware(dev);
if (retval < 0)
return retval;
dev->mailbox = blackbird_find_mailbox(dev);
if (dev->mailbox < 0)
return -1;
retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */
if (retval < 0) {
dprintk(0, "ERROR: Firmware ping failed!\n");
return -1;
}
retval = blackbird_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, &version);
if (retval < 0) {
dprintk(0, "ERROR: Firmware get encoder version failed!\n");
return -1;
}
dprintk(0, "Firmware version is 0x%08x\n", version);
}
msleep(1);
cx_write(MO_PINMUX_IO, 0x88); /* 656-8bit IO and enable MPEG parallel IO */
cx_clear(MO_INPUT_FORMAT, 0x100); /* chroma subcarrier lock to normal? */
cx_write(MO_VBOS_CONTROL, 0x84A00); /* no 656 mode, 8-bit pixels, disable VBI */
cx_clear(MO_OUTPUT_FORMAT, 0x0008); /* Normal Y-limits to let the mpeg encoder sync */
blackbird_codec_settings(dev);
msleep(1);
/* blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0xef, 0xef);
blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0xf0, 0xf0);
blackbird_api_cmd(dev, IVTV_API_ASSIGN_NUM_VSYNC_LINES, 4, 0, 0x180, 0x180); */
blackbird_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0,
BLACKBIRD_FIELD1_SAA7115,
BLACKBIRD_FIELD2_SAA7115
);
/* blackbird_api_cmd(dev, IVTV_API_ASSIGN_PLACEHOLDER, 12, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); */
blackbird_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0,
BLACKBIRD_CUSTOM_EXTENSION_USR_DATA,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
/* initialize the video input */
blackbird_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0);
msleep(1);
blackbird_api_cmd(dev, CX2341X_ENC_MUTE_VIDEO, 1, 0, BLACKBIRD_UNMUTE);
msleep(1);
blackbird_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, BLACKBIRD_UNMUTE);
msleep(1);
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
/* start capturing to the host interface */
/* blackbird_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, 0, 0x13); */
blackbird_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0,
BLACKBIRD_MPEG_CAPTURE,
BLACKBIRD_RAW_BITS_NONE
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
);
msleep(10);
blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0,0);
return 0;
}
/* ------------------------------------------------------------------ */
static int bb_buf_setup(struct videobuf_queue *q,
unsigned int *count, unsigned int *size)
{
struct cx8802_fh *fh = q->priv_data;
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
fh->dev->ts_packet_size = 188 * 4; /* was: 512 */
fh->dev->ts_packet_count = mpegbufs; /* was: 100 */
*size = fh->dev->ts_packet_size * fh->dev->ts_packet_count;
*count = fh->dev->ts_packet_count;
return 0;
}
static int
bb_buf_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
enum v4l2_field field)
{
struct cx8802_fh *fh = q->priv_data;
return cx8802_buf_prepare(q, fh->dev, (struct cx88_buffer*)vb, field);
}
static void
bb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
{
struct cx8802_fh *fh = q->priv_data;
cx8802_buf_queue(fh->dev, (struct cx88_buffer*)vb);
}
static void
bb_buf_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
{
cx88_free_buffer(q, (struct cx88_buffer*)vb);
}
static struct videobuf_queue_ops blackbird_qops = {
.buf_setup = bb_buf_setup,
.buf_prepare = bb_buf_prepare,
.buf_queue = bb_buf_queue,
.buf_release = bb_buf_release,
};
/* ------------------------------------------------------------------ */
static const u32 *ctrl_classes[] = {
cx88_user_ctrls,
cx2341x_mpeg_ctrls,
NULL
};
static int blackbird_queryctrl(struct cx8802_dev *dev, struct v4l2_queryctrl *qctrl)
{
qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
if (qctrl->id == 0)
return -EINVAL;
/* Standard V4L2 controls */
if (cx8800_ctrl_query(qctrl) == 0)
return 0;
/* MPEG V4L2 controls */
if (cx2341x_ctrl_query(&dev->params, qctrl))
qctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
return 0;
}
/* ------------------------------------------------------------------ */
/* IOCTL Handlers */
static int vidioc_querymenu (struct file *file, void *priv,
struct v4l2_querymenu *qmenu)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
struct v4l2_queryctrl qctrl;
qctrl.id = qmenu->id;
blackbird_queryctrl(dev, &qctrl);
return v4l2_ctrl_query_menu(qmenu, &qctrl, cx2341x_ctrl_get_menu(qmenu->id));
}
static int vidioc_querycap (struct file *file, void *priv,
struct v4l2_capability *cap)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
struct cx88_core *core = dev->core;
strcpy(cap->driver, "cx88_blackbird");
strlcpy(cap->card, core->board.name, sizeof(cap->card));
sprintf(cap->bus_info,"PCI:%s",pci_name(dev->pci));
cap->version = CX88_VERSION_CODE;
cap->capabilities =
V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING;
if (UNSET != core->board.tuner_type)
cap->capabilities |= V4L2_CAP_TUNER;
return 0;
}
static int vidioc_enum_fmt_cap (struct file *file, void *priv,
struct v4l2_fmtdesc *f)
{
if (f->index != 0)
return -EINVAL;
strlcpy(f->description, "MPEG", sizeof(f->description));
f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
f->pixelformat = V4L2_PIX_FMT_MPEG;
return 0;
}
static int vidioc_g_fmt_cap (struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx8802_fh *fh = priv;
struct cx8802_dev *dev = fh->dev;
f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG;
f->fmt.pix.bytesperline = 0;
f->fmt.pix.sizeimage = dev->ts_packet_size * dev->ts_packet_count; /* 188 * 4 * 1024; */
f->fmt.pix.colorspace = 0;
f->fmt.pix.width = dev->width;
f->fmt.pix.height = dev->height;
f->fmt.pix.field = fh->mpegq.field;
dprintk(0,"VIDIOC_G_FMT: w: %d, h: %d, f: %d\n",
dev->width, dev->height, fh->mpegq.field );
return 0;
}
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
static int vidioc_try_fmt_cap (struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx8802_fh *fh = priv;
struct cx8802_dev *dev = fh->dev;
f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG;
f->fmt.pix.bytesperline = 0;
f->fmt.pix.sizeimage = dev->ts_packet_size * dev->ts_packet_count; /* 188 * 4 * 1024; */;
f->fmt.pix.colorspace = 0;
dprintk(0,"VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n",
dev->width, dev->height, fh->mpegq.field );
return 0;
}
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
static int vidioc_s_fmt_cap (struct file *file, void *priv,
struct v4l2_format *f)
{
struct cx8802_fh *fh = priv;
struct cx8802_dev *dev = fh->dev;
struct cx88_core *core = dev->core;
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG;
f->fmt.pix.bytesperline = 0;
f->fmt.pix.sizeimage = dev->ts_packet_size * dev->ts_packet_count; /* 188 * 4 * 1024; */;
f->fmt.pix.colorspace = 0;
dev->width = f->fmt.pix.width;
dev->height = f->fmt.pix.height;
fh->mpegq.field = f->fmt.pix.field;
cx88_set_scale(core, f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field);
blackbird_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0,
f->fmt.pix.height, f->fmt.pix.width);
dprintk(0,"VIDIOC_S_FMT: w: %d, h: %d, f: %d\n",
f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field );
return 0;
}
static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *p)
{
struct cx8802_fh *fh = priv;
return (videobuf_reqbufs(&fh->mpegq, p));
}
static int vidioc_querybuf (struct file *file, void *priv, struct v4l2_buffer *p)
{
struct cx8802_fh *fh = priv;
return (videobuf_querybuf(&fh->mpegq, p));
}
static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *p)
{
struct cx8802_fh *fh = priv;
return (videobuf_qbuf(&fh->mpegq, p));
}
static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *p)
{
struct cx8802_fh *fh = priv;
return (videobuf_dqbuf(&fh->mpegq, p,
file->f_flags & O_NONBLOCK));
}
static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
{
struct cx8802_fh *fh = priv;
return videobuf_streamon(&fh->mpegq);
}
static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
{
struct cx8802_fh *fh = priv;
return videobuf_streamoff(&fh->mpegq);
}
static int vidioc_g_ext_ctrls (struct file *file, void *priv,
struct v4l2_ext_controls *f)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
return cx2341x_ext_ctrls(&dev->params, 0, f, VIDIOC_G_EXT_CTRLS);
}
static int vidioc_s_ext_ctrls (struct file *file, void *priv,
struct v4l2_ext_controls *f)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
struct cx2341x_mpeg_params p;
int err;
if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
p = dev->params;
err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS);
if (!err) {
err = cx2341x_update(dev, blackbird_mbox_func, &dev->params, &p);
dev->params = p;
}
return err;
}
static int vidioc_try_ext_ctrls (struct file *file, void *priv,
struct v4l2_ext_controls *f)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
struct cx2341x_mpeg_params p;
int err;
if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG)
return -EINVAL;
p = dev->params;
err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_TRY_EXT_CTRLS);
return err;
}
static int vidioc_s_frequency (struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct cx8802_fh *fh = priv;
struct cx8802_dev *dev = fh->dev;
struct cx88_core *core = dev->core;
blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0,
BLACKBIRD_END_NOW,
BLACKBIRD_MPEG_CAPTURE,
BLACKBIRD_RAW_BITS_NONE);
cx88_set_freq (core,f);
blackbird_initialize_codec(dev);
cx88_set_scale(dev->core, dev->width, dev->height,
fh->mpegq.field);
return 0;
}
static int vidioc_log_status (struct file *file, void *priv)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
struct cx88_core *core = dev->core;
char name[32 + 2];
snprintf(name, sizeof(name), "%s/2", core->name);
printk("%s/2: ============ START LOG STATUS ============\n",
core->name);
cx88_call_i2c_clients(core, VIDIOC_LOG_STATUS, NULL);
cx2341x_log_status(&dev->params, name);
printk("%s/2: ============= END LOG STATUS =============\n",
core->name);
return 0;
}
static int vidioc_queryctrl (struct file *file, void *priv,
struct v4l2_queryctrl *qctrl)
{
struct cx8802_dev *dev = ((struct cx8802_fh *)priv)->dev;
if (blackbird_queryctrl(dev, qctrl) == 0)
return 0;
qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id);
if (unlikely(qctrl->id == 0))
return -EINVAL;
return cx8800_ctrl_query(qctrl);
}
static int vidioc_enum_input (struct file *file, void *priv,
struct v4l2_input *i)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
return cx88_enum_input (core,i);
}
static int vidioc_g_ctrl (struct file *file, void *priv,
struct v4l2_control *ctl)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
return
cx88_get_control(core,ctl);
}
static int vidioc_s_ctrl (struct file *file, void *priv,
struct v4l2_control *ctl)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
return
cx88_set_control(core,ctl);
}
static int vidioc_g_frequency (struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct cx8802_fh *fh = priv;
struct cx88_core *core = fh->dev->core;
if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
f->type = V4L2_TUNER_ANALOG_TV;
f->frequency = core->freq;
cx88_call_i2c_clients(core,VIDIOC_G_FREQUENCY,f);
return 0;
}
static int vidioc_g_input (struct file *file, void *priv, unsigned int *i)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
*i = core->input;
return 0;
}
static int vidioc_s_input (struct file *file, void *priv, unsigned int i)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
if (i >= 4)
return -EINVAL;
mutex_lock(&core->lock);
cx88_newstation(core);
cx88_video_mux(core,i);
mutex_unlock(&core->lock);
return 0;
}
static int vidioc_g_tuner (struct file *file, void *priv,
struct v4l2_tuner *t)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
u32 reg;
if (unlikely(UNSET == core->board.tuner_type))
return -EINVAL;
if (0 != t->index)
return -EINVAL;
strcpy(t->name, "Television");
t->type = V4L2_TUNER_ANALOG_TV;
t->capability = V4L2_TUNER_CAP_NORM;
t->rangehigh = 0xffffffffUL;
cx88_get_stereo(core ,t);
reg = cx_read(MO_DEVICE_STATUS);
t->signal = (reg & (1<<5)) ? 0xffff : 0x0000;
return 0;
}
static int vidioc_s_tuner (struct file *file, void *priv,
struct v4l2_tuner *t)
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
if (UNSET == core->board.tuner_type)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
cx88_set_stereo(core, t->audmode, 1);
return 0;
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
}
static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id)
{
struct cx88_core *core = ((struct cx8802_fh *)priv)->dev->core;
mutex_lock(&core->lock);
cx88_set_tvnorm(core,*id);
mutex_unlock(&core->lock);
return 0;
}
/* FIXME: cx88_ioctl_hook not implemented */
static int mpeg_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
struct cx8802_dev *dev = NULL;
struct cx8802_fh *fh;
struct cx8802_driver *drv = NULL;
int err;
dev = cx8802_get_device(inode);
dprintk( 1, "%s\n", __FUNCTION__);
if (dev == NULL)
return -ENODEV;
/* Make sure we can acquire the hardware */
drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD);
if (drv) {
err = drv->request_acquire(drv);
if(err != 0) {
dprintk(1,"%s: Unable to acquire hardware, %d\n", __FUNCTION__, err);
return err;
}
}
if (blackbird_initialize_codec(dev) < 0) {
if (drv)
drv->request_release(drv);
return -EINVAL;
}
dprintk(1,"open minor=%d\n",minor);
/* allocate + initialize per filehandle data */
fh = kzalloc(sizeof(*fh),GFP_KERNEL);
if (NULL == fh) {
if (drv)
drv->request_release(drv);
return -ENOMEM;
}
file->private_data = fh;
fh->dev = dev;
videobuf_queue_pci_init(&fh->mpegq, &blackbird_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct cx88_buffer),
fh);
/* FIXME: locking against other video device */
cx88_set_scale(dev->core, dev->width, dev->height,
fh->mpegq.field);
return 0;
}
static int mpeg_release(struct inode *inode, struct file *file)
{
struct cx8802_fh *fh = file->private_data;
struct cx8802_dev *dev = NULL;
struct cx8802_driver *drv = NULL;
/* blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, BLACKBIRD_END_NOW, 0, 0x13); */
blackbird_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0,
BLACKBIRD_END_NOW,
BLACKBIRD_MPEG_CAPTURE,
BLACKBIRD_RAW_BITS_NONE
);
cx8802_cancel_buffers(fh->dev);
/* stop mpeg capture */
videobuf_stop(&fh->mpegq);
videobuf_mmap_free(&fh->mpegq);
file->private_data = NULL;
kfree(fh);
/* Make sure we release the hardware */
dev = cx8802_get_device(inode);
if (dev == NULL)
return -ENODEV;
drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD);
if (drv)
drv->request_release(drv);
return 0;
}
static ssize_t
mpeg_read(struct file *file, char __user *data, size_t count, loff_t *ppos)
{
struct cx8802_fh *fh = file->private_data;
return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0,
file->f_flags & O_NONBLOCK);
}
static unsigned int
mpeg_poll(struct file *file, struct poll_table_struct *wait)
{
struct cx8802_fh *fh = file->private_data;
return videobuf_poll_stream(file, &fh->mpegq, wait);
}
static int
mpeg_mmap(struct file *file, struct vm_area_struct * vma)
{
struct cx8802_fh *fh = file->private_data;
return videobuf_mmap_mapper(&fh->mpegq, vma);
}
static const struct file_operations mpeg_fops =
{
.owner = THIS_MODULE,
.open = mpeg_open,
.release = mpeg_release,
.read = mpeg_read,
.poll = mpeg_poll,
.mmap = mpeg_mmap,
.ioctl = video_ioctl2,
.llseek = no_llseek,
};
static struct video_device cx8802_mpeg_template =
{
.name = "cx8802",
.type = VID_TYPE_CAPTURE|VID_TYPE_TUNER|VID_TYPE_SCALES|VID_TYPE_MPEG_ENCODER,
.fops = &mpeg_fops,
.minor = -1,
.vidioc_querymenu = vidioc_querymenu,
.vidioc_querycap = vidioc_querycap,
.vidioc_enum_fmt_cap = vidioc_enum_fmt_cap,
.vidioc_g_fmt_cap = vidioc_g_fmt_cap,
.vidioc_try_fmt_cap = vidioc_try_fmt_cap,
.vidioc_s_fmt_cap = vidioc_s_fmt_cap,
.vidioc_reqbufs = vidioc_reqbufs,
.vidioc_querybuf = vidioc_querybuf,
.vidioc_qbuf = vidioc_qbuf,
.vidioc_dqbuf = vidioc_dqbuf,
.vidioc_streamon = vidioc_streamon,
.vidioc_streamoff = vidioc_streamoff,
.vidioc_g_ext_ctrls = vidioc_g_ext_ctrls,
.vidioc_s_ext_ctrls = vidioc_s_ext_ctrls,
.vidioc_try_ext_ctrls = vidioc_try_ext_ctrls,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_log_status = vidioc_log_status,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_enum_input = vidioc_enum_input,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_s_std = vidioc_s_std,
.tvnorms = CX88_NORMS,
.current_norm = V4L2_STD_NTSC_M,
};
/* ------------------------------------------------------------------ */
/* The CX8802 MPEG API will call this when we can use the hardware */
static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* By default, core setup will leave the cx22702 out of reset, on the bus.
* We left the hardware on power up with the cx22702 active.
* We're being given access to re-arrange the GPIOs.
* Take the bus off the cx22702 and put the cx23416 on it.
*/
cx_clear(MO_GP0_IO, 0x00000080); /* cx22702 in reset */
cx_set(MO_GP0_IO, 0x00000004); /* Disable the cx22702 */
break;
default:
err = -ENODEV;
}
return err;
}
/* The CX8802 MPEG API will call this when we need to release the hardware */
static int cx8802_blackbird_advise_release(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
int err = 0;
switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_HVR1300:
/* Exit leaving the cx23416 on the bus */
break;
default:
err = -ENODEV;
}
return err;
}
static void blackbird_unregister_video(struct cx8802_dev *dev)
{
if (dev->mpeg_dev) {
if (-1 != dev->mpeg_dev->minor)
video_unregister_device(dev->mpeg_dev);
else
video_device_release(dev->mpeg_dev);
dev->mpeg_dev = NULL;
}
}
static int blackbird_register_video(struct cx8802_dev *dev)
{
int err;
dev->mpeg_dev = cx88_vdev_init(dev->core,dev->pci,
&cx8802_mpeg_template,"mpeg");
err = video_register_device(dev->mpeg_dev,VFL_TYPE_GRABBER, -1);
if (err < 0) {
printk(KERN_INFO "%s/2: can't register mpeg device\n",
dev->core->name);
return err;
}
printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n",
dev->core->name,dev->mpeg_dev->minor & 0x1f);
return 0;
}
/* ----------------------------------------------------------- */
static int cx8802_blackbird_probe(struct cx8802_driver *drv)
{
struct cx88_core *core = drv->core;
struct cx8802_dev *dev = core->dvbdev;
int err;
dprintk( 1, "%s\n", __FUNCTION__);
dprintk( 1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
core->boardnr,
core->name,
core->pci_bus,
core->pci_slot);
err = -ENODEV;
if (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))
goto fail_core;
dev->width = 720;
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
dev->height = 576;
cx2341x_fill_defaults(&dev->params);
dev->params.port = CX2341X_PORT_STREAMING;
cx8802_mpeg_template.current_norm = core->tvnorm;
if (core->tvnorm & V4L2_STD_525_60) {
dev->height = 480;
} else {
dev->height = 576;
}
/* blackbird stuff */
printk("%s/2: cx23416 based mpeg encoder (blackbird reference design)\n",
core->name);
host_setup(dev->core);
blackbird_register_video(dev);
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
/* initial device configuration: needed ? */
mutex_lock(&dev->core->lock);
// init_controls(core);
cx88_set_tvnorm(core,core->tvnorm);
cx88_video_mux(core,0);
mutex_unlock(&dev->core->lock);
[PATCH] v4l: CX88 updates and card additions - Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: Uli Luckas <luckas@musoft.de> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Catalin Climov <catalin@climov.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:41 +08:00
return 0;
fail_core:
return err;
}
static int cx8802_blackbird_remove(struct cx8802_driver *drv)
{
/* blackbird */
blackbird_unregister_video(drv->core->dvbdev);
return 0;
}
static struct cx8802_driver cx8802_blackbird_driver = {
.type_id = CX88_MPEG_BLACKBIRD,
.hw_access = CX8802_DRVCTL_SHARED,
.probe = cx8802_blackbird_probe,
.remove = cx8802_blackbird_remove,
.advise_acquire = cx8802_blackbird_advise_acquire,
.advise_release = cx8802_blackbird_advise_release,
};
static int blackbird_init(void)
{
printk(KERN_INFO "cx2388x blackbird driver version %d.%d.%d loaded\n",
(CX88_VERSION_CODE >> 16) & 0xff,
(CX88_VERSION_CODE >> 8) & 0xff,
CX88_VERSION_CODE & 0xff);
#ifdef SNAPSHOT
printk(KERN_INFO "cx2388x: snapshot date %04d-%02d-%02d\n",
SNAPSHOT/10000, (SNAPSHOT/100)%100, SNAPSHOT%100);
#endif
return cx8802_register_driver(&cx8802_blackbird_driver);
}
static void blackbird_fini(void)
{
cx8802_unregister_driver(&cx8802_blackbird_driver);
}
module_init(blackbird_init);
module_exit(blackbird_fini);
module_param_named(video_debug,cx8802_mpeg_template.debug, int, 0644);
MODULE_PARM_DESC(debug,"enable debug messages [video]");
/* ----------------------------------------------------------- */
/*
* Local variables:
* c-basic-offset: 8
* End:
* kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
*/