linux/arch/sparc/kernel/vio.c

574 lines
13 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/* vio.c: Virtual I/O channel devices probing infrastructure.
*
* Copyright (c) 2003-2005 IBM Corp.
* Dave Engebretsen engebret@us.ibm.com
* Santiago Leon santil@us.ibm.com
* Hollis Blanchard <hollisb@us.ibm.com>
* Stephen Rothwell
*
* Adapted to sparc64 by David S. Miller davem@davemloft.net
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/export.h>
#include <linux/init.h>
#include <asm/mdesc.h>
#include <asm/vio.h>
static const struct vio_device_id *vio_match_device(
const struct vio_device_id *matches,
const struct vio_dev *dev)
{
const char *type, *compat;
int len;
type = dev->type;
compat = dev->compat;
len = dev->compat_len;
while (matches->type[0] || matches->compat[0]) {
int match = 1;
if (matches->type[0])
match &= !strcmp(matches->type, type);
if (matches->compat[0]) {
match &= len &&
of_find_in_proplist(compat, matches->compat, len);
}
if (match)
return matches;
matches++;
}
return NULL;
}
static int vio_hotplug(struct device *dev, struct kobj_uevent_env *env)
{
const struct vio_dev *vio_dev = to_vio_dev(dev);
add_uevent_var(env, "MODALIAS=vio:T%sS%s", vio_dev->type, vio_dev->compat);
return 0;
}
static int vio_bus_match(struct device *dev, struct device_driver *drv)
{
struct vio_dev *vio_dev = to_vio_dev(dev);
struct vio_driver *vio_drv = to_vio_driver(drv);
const struct vio_device_id *matches = vio_drv->id_table;
if (!matches)
return 0;
return vio_match_device(matches, vio_dev) != NULL;
}
static int vio_device_probe(struct device *dev)
{
struct vio_dev *vdev = to_vio_dev(dev);
struct vio_driver *drv = to_vio_driver(dev->driver);
const struct vio_device_id *id;
if (!drv->probe)
return -ENODEV;
id = vio_match_device(drv->id_table, vdev);
if (!id)
return -ENODEV;
/* alloc irqs (unless the driver specified not to) */
if (!drv->no_irq) {
if (vdev->tx_irq == 0 && vdev->tx_ino != ~0UL)
vdev->tx_irq = sun4v_build_virq(vdev->cdev_handle,
vdev->tx_ino);
if (vdev->rx_irq == 0 && vdev->rx_ino != ~0UL)
vdev->rx_irq = sun4v_build_virq(vdev->cdev_handle,
vdev->rx_ino);
}
return drv->probe(vdev, id);
}
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14 03:35:22 +08:00
static void vio_device_remove(struct device *dev)
{
struct vio_dev *vdev = to_vio_dev(dev);
struct vio_driver *drv = to_vio_driver(dev->driver);
if (drv->remove) {
/*
* Ideally, we would remove/deallocate tx/rx virqs
* here - however, there are currently no support
* routines to do so at the moment. TBD
*/
drv->remove(vdev);
}
}
static ssize_t devspec_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct vio_dev *vdev = to_vio_dev(dev);
const char *str = "none";
if (!strcmp(vdev->type, "vnet-port"))
str = "vnet";
else if (!strcmp(vdev->type, "vdc-port"))
str = "vdisk";
return sprintf(buf, "%s\n", str);
}
static DEVICE_ATTR_RO(devspec);
static ssize_t type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct vio_dev *vdev = to_vio_dev(dev);
return sprintf(buf, "%s\n", vdev->type);
}
static DEVICE_ATTR_RO(type);
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
const struct vio_dev *vdev = to_vio_dev(dev);
return sprintf(buf, "vio:T%sS%s\n", vdev->type, vdev->compat);
}
static DEVICE_ATTR_RO(modalias);
static struct attribute *vio_dev_attrs[] = {
&dev_attr_devspec.attr,
&dev_attr_type.attr,
&dev_attr_modalias.attr,
NULL,
};
ATTRIBUTE_GROUPS(vio_dev);
static struct bus_type vio_bus_type = {
.name = "vio",
.dev_groups = vio_dev_groups,
.uevent = vio_hotplug,
.match = vio_bus_match,
.probe = vio_device_probe,
.remove = vio_device_remove,
};
int __vio_register_driver(struct vio_driver *viodrv, struct module *owner,
const char *mod_name)
{
viodrv->driver.bus = &vio_bus_type;
viodrv->driver.name = viodrv->name;
viodrv->driver.owner = owner;
viodrv->driver.mod_name = mod_name;
return driver_register(&viodrv->driver);
}
EXPORT_SYMBOL(__vio_register_driver);
void vio_unregister_driver(struct vio_driver *viodrv)
{
driver_unregister(&viodrv->driver);
}
EXPORT_SYMBOL(vio_unregister_driver);
2008-01-22 09:22:46 +08:00
static void vio_dev_release(struct device *dev)
{
kfree(to_vio_dev(dev));
}
static ssize_t
show_pciobppath_attr(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct vio_dev *vdev;
struct device_node *dp;
vdev = to_vio_dev(dev);
dp = vdev->dp;
return scnprintf(buf, PAGE_SIZE, "%pOF\n", dp);
}
static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH,
show_pciobppath_attr, NULL);
static struct device_node *cdev_node;
static struct vio_dev *root_vdev;
static u64 cdev_cfg_handle;
static const u64 *vio_cfg_handle(struct mdesc_handle *hp, u64 node)
{
const u64 *cfg_handle = NULL;
u64 a;
mdesc_for_each_arc(a, hp, node, MDESC_ARC_TYPE_BACK) {
u64 target;
target = mdesc_arc_target(hp, a);
cfg_handle = mdesc_get_property(hp, target,
"cfg-handle", NULL);
if (cfg_handle)
break;
}
return cfg_handle;
}
/**
* vio_vdev_node() - Find VDEV node in MD
* @hp: Handle to the MD
* @vdev: Pointer to VDEV
*
* Find the node in the current MD which matches the given vio_dev. This
* must be done dynamically since the node value can change if the MD
* is updated.
*
* NOTE: the MD must be locked, using mdesc_grab(), when calling this routine
*
* Return: The VDEV node in MDESC
*/
u64 vio_vdev_node(struct mdesc_handle *hp, struct vio_dev *vdev)
{
u64 node;
if (vdev == NULL)
return MDESC_NODE_NULL;
node = mdesc_get_node(hp, (const char *)vdev->node_name,
&vdev->md_node_info);
return node;
}
EXPORT_SYMBOL(vio_vdev_node);
static void vio_fill_channel_info(struct mdesc_handle *hp, u64 mp,
struct vio_dev *vdev)
{
u64 a;
vdev->tx_ino = ~0UL;
vdev->rx_ino = ~0UL;
vdev->channel_id = ~0UL;
mdesc_for_each_arc(a, hp, mp, MDESC_ARC_TYPE_FWD) {
const u64 *chan_id;
const u64 *irq;
u64 target;
target = mdesc_arc_target(hp, a);
irq = mdesc_get_property(hp, target, "tx-ino", NULL);
if (irq)
vdev->tx_ino = *irq;
irq = mdesc_get_property(hp, target, "rx-ino", NULL);
if (irq)
vdev->rx_ino = *irq;
chan_id = mdesc_get_property(hp, target, "id", NULL);
if (chan_id)
vdev->channel_id = *chan_id;
}
vdev->cdev_handle = cdev_cfg_handle;
}
int vio_set_intr(unsigned long dev_ino, int state)
{
int err;
err = sun4v_vintr_set_valid(cdev_cfg_handle, dev_ino, state);
return err;
}
EXPORT_SYMBOL(vio_set_intr);
static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
const char *node_name,
struct device *parent)
{
const char *type, *compat;
struct device_node *dp;
struct vio_dev *vdev;
int err, tlen, clen;
const u64 *id, *cfg_handle;
type = mdesc_get_property(hp, mp, "device-type", &tlen);
if (!type) {
type = mdesc_get_property(hp, mp, "name", &tlen);
if (!type) {
type = mdesc_node_name(hp, mp);
tlen = strlen(type) + 1;
}
}
if (tlen > VIO_MAX_TYPE_LEN || strlen(type) >= VIO_MAX_TYPE_LEN) {
printk(KERN_ERR "VIO: Type string [%s] is too long.\n",
type);
return NULL;
}
id = mdesc_get_property(hp, mp, "id", NULL);
cfg_handle = vio_cfg_handle(hp, mp);
compat = mdesc_get_property(hp, mp, "device-type", &clen);
if (!compat) {
clen = 0;
} else if (clen > VIO_MAX_COMPAT_LEN) {
printk(KERN_ERR "VIO: Compat len %d for [%s] is too long.\n",
clen, type);
return NULL;
}
vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
if (!vdev) {
printk(KERN_ERR "VIO: Could not allocate vio_dev\n");
return NULL;
}
vdev->mp = mp;
memcpy(vdev->type, type, tlen);
if (compat)
memcpy(vdev->compat, compat, clen);
else
memset(vdev->compat, 0, sizeof(vdev->compat));
vdev->compat_len = clen;
vdev->port_id = ~0UL;
vdev->tx_irq = 0;
vdev->rx_irq = 0;
vio_fill_channel_info(hp, mp, vdev);
if (!id) {
dev_set_name(&vdev->dev, "%s", type);
vdev->dev_no = ~(u64)0;
} else if (!cfg_handle) {
dev_set_name(&vdev->dev, "%s-%llu", type, *id);
vdev->dev_no = *id;
} else {
dev_set_name(&vdev->dev, "%s-%llu-%llu", type,
*cfg_handle, *id);
vdev->dev_no = *cfg_handle;
vdev->port_id = *id;
}
vdev->dev.parent = parent;
vdev->dev.bus = &vio_bus_type;
vdev->dev.release = vio_dev_release;
if (parent == NULL) {
dp = cdev_node;
} else if (to_vio_dev(parent) == root_vdev) {
for_each_child_of_node(cdev_node, dp) {
if (of_node_is_type(dp, type))
break;
}
} else {
dp = to_vio_dev(parent)->dp;
}
vdev->dp = dp;
/*
* node_name is NULL for the parent/channel-devices node and
* the parent doesn't require the MD node info.
*/
if (node_name != NULL) {
(void) snprintf(vdev->node_name, VIO_MAX_NAME_LEN, "%s",
node_name);
err = mdesc_get_node_info(hp, mp, node_name,
&vdev->md_node_info);
if (err) {
pr_err("VIO: Could not get MD node info %s, err=%d\n",
dev_name(&vdev->dev), err);
kfree(vdev);
return NULL;
}
}
pr_info("VIO: Adding device %s (tx_ino = %llx, rx_ino = %llx)\n",
dev_name(&vdev->dev), vdev->tx_ino, vdev->rx_ino);
err = device_register(&vdev->dev);
if (err) {
printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
dev_name(&vdev->dev), err);
put_device(&vdev->dev);
return NULL;
}
if (vdev->dp)
err = sysfs_create_file(&vdev->dev.kobj,
&dev_attr_obppath.attr);
return vdev;
}
static void vio_add(struct mdesc_handle *hp, u64 node,
const char *node_name)
{
(void) vio_create_one(hp, node, node_name, &root_vdev->dev);
}
struct vio_remove_node_data {
struct mdesc_handle *hp;
u64 node;
};
static int vio_md_node_match(struct device *dev, void *arg)
{
struct vio_dev *vdev = to_vio_dev(dev);
struct vio_remove_node_data *node_data;
u64 node;
node_data = (struct vio_remove_node_data *)arg;
node = vio_vdev_node(node_data->hp, vdev);
if (node == node_data->node)
return 1;
else
return 0;
}
static void vio_remove(struct mdesc_handle *hp, u64 node, const char *node_name)
{
struct vio_remove_node_data node_data;
struct device *dev;
node_data.hp = hp;
node_data.node = node;
dev = device_find_child(&root_vdev->dev, (void *)&node_data,
vio_md_node_match);
if (dev) {
printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
device_unregister(dev);
put_device(dev);
} else {
pr_err("VIO: %s node not found in MDESC\n", node_name);
}
}
static struct mdesc_notifier_client vio_device_notifier = {
.add = vio_add,
.remove = vio_remove,
.node_name = "virtual-device-port",
};
/* We are only interested in domain service ports under the
* "domain-services" node. On control nodes there is another port
* under "openboot" that we should not mess with as aparently that is
* reserved exclusively for OBP use.
*/
static void vio_add_ds(struct mdesc_handle *hp, u64 node,
const char *node_name)
{
int found;
u64 a;
found = 0;
mdesc_for_each_arc(a, hp, node, MDESC_ARC_TYPE_BACK) {
u64 target = mdesc_arc_target(hp, a);
const char *name = mdesc_node_name(hp, target);
if (!strcmp(name, "domain-services")) {
found = 1;
break;
}
}
if (found)
(void) vio_create_one(hp, node, node_name, &root_vdev->dev);
}
static struct mdesc_notifier_client vio_ds_notifier = {
.add = vio_add_ds,
.remove = vio_remove,
.node_name = "domain-services-port",
};
static const char *channel_devices_node = "channel-devices";
static const char *channel_devices_compat = "SUNW,sun4v-channel-devices";
static const char *cfg_handle_prop = "cfg-handle";
static int __init vio_init(void)
{
struct mdesc_handle *hp;
const char *compat;
const u64 *cfg_handle;
int err, len;
u64 root;
err = bus_register(&vio_bus_type);
if (err) {
printk(KERN_ERR "VIO: Could not register bus type err=%d\n",
err);
return err;
}
hp = mdesc_grab();
if (!hp)
return 0;
root = mdesc_node_by_name(hp, MDESC_NODE_NULL, channel_devices_node);
if (root == MDESC_NODE_NULL) {
printk(KERN_INFO "VIO: No channel-devices MDESC node.\n");
mdesc_release(hp);
return 0;
}
cdev_node = of_find_node_by_name(NULL, "channel-devices");
err = -ENODEV;
if (!cdev_node) {
printk(KERN_INFO "VIO: No channel-devices OBP node.\n");
goto out_release;
}
compat = mdesc_get_property(hp, root, "compatible", &len);
if (!compat) {
printk(KERN_ERR "VIO: Channel devices lacks compatible "
"property\n");
goto out_release;
}
if (!of_find_in_proplist(compat, channel_devices_compat, len)) {
printk(KERN_ERR "VIO: Channel devices node lacks (%s) "
"compat entry.\n", channel_devices_compat);
goto out_release;
}
cfg_handle = mdesc_get_property(hp, root, cfg_handle_prop, NULL);
if (!cfg_handle) {
printk(KERN_ERR "VIO: Channel devices lacks %s property\n",
cfg_handle_prop);
goto out_release;
}
cdev_cfg_handle = *cfg_handle;
root_vdev = vio_create_one(hp, root, NULL, NULL);
err = -ENODEV;
if (!root_vdev) {
printk(KERN_ERR "VIO: Could not create root device.\n");
goto out_release;
}
mdesc_register_notifier(&vio_device_notifier);
mdesc_register_notifier(&vio_ds_notifier);
mdesc_release(hp);
return err;
out_release:
mdesc_release(hp);
return err;
}
postcore_initcall(vio_init);