linux/arch/arm/boot/dts/am335x-cm-t335.dts

/*
 * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
 *
 * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "am33xx.dtsi"

/ {
	model = "CompuLab CM-T335";
	compatible = "compulab,cm-t335", "ti,am33xx";

	memory {
		device_type = "memory";
		reg = <0x80000000 0x8000000>;	/* 128 MB */
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&gpio_led_pins>;
		led@0 {
			label = "cm_t335:green";
			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
			linux,default-trigger = "heartbeat";
		};
	};
};

&am33xx_pinmux {
	pinctrl-names = "default";
	pinctrl-0 = <>;

	i2c0_pins: pinmux_i2c0_pins {
		pinctrl-single,pins = <
			/* i2c0_sda.i2c0_sda */
			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
			/* i2c0_scl.i2c0_scl */
			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
		>;
	};

	i2c1_pins: pinmux_i2c1_pins {
		pinctrl-single,pins = <
			/* uart0_ctsn.i2c1_sda */
			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
			/* uart0_rtsn.i2c1_scl */
			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
		>;
	};

	gpio_led_pins: pinmux_gpio_led_pins {
		pinctrl-single,pins = <
			/* gpmc_csn3.gpio2_0 */
			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
		>;
	};

	nandflash_pins: pinmux_nandflash_pins {
		pinctrl-single,pins = <
			/* gpmc_ad0.gpmc_ad0 */
			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad1.gpmc_ad1 */
			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad2.gpmc_ad2 */
			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad3.gpmc_ad3 */
			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad4.gpmc_ad4 */
			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad5.gpmc_ad5 */
			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad6.gpmc_ad6 */
			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_ad7.gpmc_ad7 */
			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_wait0.gpmc_wait0 */
			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
			/* gpmc_wpn.gpio0_30 */
			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
			/* gpmc_csn0.gpmc_csn0  */
			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
			/* gpmc_advn_ale.gpmc_advn_ale */
			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
			/* gpmc_oen_ren.gpmc_oen_ren */
			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
			/* gpmc_wen.gpmc_wen */
			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
			/* gpmc_ben0_cle.gpmc_ben0_cle */
			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
		>;
	};

	uart0_pins: pinmux_uart0_pins {
		pinctrl-single,pins = <
			/* uart0_rxd.uart0_rxd */
			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
			/* uart0_txd.uart0_txd */
			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
		>;
	};
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_pins>;

	status = "okay";
};

&i2c0 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;

	status = "okay";
	clock-frequency = <400000>;
	/* CM-T335 board EEPROM */
	eeprom: 24c02@50 {
		compatible = "atmel,24c02";
		reg = <0x50>;
		pagesize = <16>;
	};
	/* Real Time Clock */
	ext_rtc: em3027@56 {
		compatible = "emmicro,em3027";
		reg = <0x56>;
	};
};

&gpmc {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&nandflash_pins>;
	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
	nand@0,0 {
		reg = <0 0 0>; /* CS0, offset 0 */
		ti,nand-ecc-opt = "bch8";
		ti,elm-id = <&elm>;
		nand-bus-width = <8>;
		gpmc,device-width = <1>;
		gpmc,sync-clk-ps = <0>;
		gpmc,cs-on-ns = <0>;
		gpmc,cs-rd-off-ns = <44>;
		gpmc,cs-wr-off-ns = <44>;
		gpmc,adv-on-ns = <6>;
		gpmc,adv-rd-off-ns = <34>;
		gpmc,adv-wr-off-ns = <44>;
		gpmc,we-on-ns = <0>;
		gpmc,we-off-ns = <40>;
		gpmc,oe-on-ns = <0>;
		gpmc,oe-off-ns = <54>;
		gpmc,access-ns = <64>;
		gpmc,rd-cycle-ns = <82>;
		gpmc,wr-cycle-ns = <82>;
		gpmc,wait-on-read = "true";
		gpmc,wait-on-write = "true";
		gpmc,bus-turnaround-ns = <0>;
		gpmc,cycle2cycle-delay-ns = <0>;
		gpmc,clk-activation-ns = <0>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,wr-access-ns = <40>;
		gpmc,wr-data-mux-bus-ns = <0>;
		/* MTD partition table */
		#address-cells = <1>;
		#size-cells = <1>;
		partition@0 {
			label = "spl";
			reg = <0x00000000 0x00200000>;
		};
		partition@1 {
			label = "uboot";
			reg = <0x00200000 0x00100000>;
		};
		partition@2 {
			label = "uboot environment";
			reg = <0x00300000 0x00100000>;
		};
		partition@3 {
			label = "dtb";
			reg = <0x00400000 0x00100000>;
		};
		partition@4 {
			label = "splash";
			reg = <0x00500000 0x00400000>;
		};
		partition@5 {
			label = "linux";
			reg = <0x00900000 0x00600000>;
		};
		partition@6 {
			label = "rootfs";
			reg = <0x00F00000 0>;
		};
	};
};

&elm {
	status = "okay";
};