linux/arch/arm/mach-exynos/common.h

185 lines
5.2 KiB
C
Raw Normal View History

/*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Common Header for EXYNOS machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:05:50 +08:00
#include <linux/platform_data/cpuidle-exynos.h>
#define EXYNOS3250_SOC_ID 0xE3472000
#define EXYNOS3_SOC_MASK 0xFFFFF000
#define EXYNOS4210_CPU_ID 0x43210000
#define EXYNOS4212_CPU_ID 0x43220000
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
#define EXYNOS5250_SOC_ID 0x43520000
#define EXYNOS5410_SOC_ID 0xE5410000
#define EXYNOS5420_SOC_ID 0xE5420000
#define EXYNOS5440_SOC_ID 0xE5440000
#define EXYNOS5800_SOC_ID 0xE5422000
#define EXYNOS5_SOC_MASK 0xFFFFF000
extern unsigned long samsung_cpu_id;
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
return ((samsung_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK)
#if defined(CONFIG_SOC_EXYNOS3250)
# define soc_is_exynos3250() is_samsung_exynos3250()
#else
# define soc_is_exynos3250() 0
#endif
#if defined(CONFIG_CPU_EXYNOS4210)
# define soc_is_exynos4210() is_samsung_exynos4210()
#else
# define soc_is_exynos4210() 0
#endif
#if defined(CONFIG_SOC_EXYNOS4212)
# define soc_is_exynos4212() is_samsung_exynos4212()
#else
# define soc_is_exynos4212() 0
#endif
#if defined(CONFIG_SOC_EXYNOS4412)
# define soc_is_exynos4412() is_samsung_exynos4412()
#else
# define soc_is_exynos4412() 0
#endif
#define EXYNOS4210_REV_0 (0x0)
#define EXYNOS4210_REV_1_0 (0x10)
#define EXYNOS4210_REV_1_1 (0x11)
#if defined(CONFIG_SOC_EXYNOS5250)
# define soc_is_exynos5250() is_samsung_exynos5250()
#else
# define soc_is_exynos5250() 0
#endif
#if defined(CONFIG_SOC_EXYNOS5410)
# define soc_is_exynos5410() is_samsung_exynos5410()
#else
# define soc_is_exynos5410() 0
#endif
#if defined(CONFIG_SOC_EXYNOS5420)
# define soc_is_exynos5420() is_samsung_exynos5420()
#else
# define soc_is_exynos5420() 0
#endif
#if defined(CONFIG_SOC_EXYNOS5440)
# define soc_is_exynos5440() is_samsung_exynos5440()
#else
# define soc_is_exynos5440() 0
#endif
#if defined(CONFIG_SOC_EXYNOS5800)
# define soc_is_exynos5800() is_samsung_exynos5800()
#else
# define soc_is_exynos5800() 0
#endif
#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
soc_is_exynos4412())
#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
soc_is_exynos5420() || soc_is_exynos5800())
extern u32 cp15_save_diag;
extern u32 cp15_save_power;
extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr;
extern void __iomem *pmu_base_addr;
void exynos_sysram_init(void);
enum {
FW_DO_IDLE_SLEEP,
FW_DO_IDLE_AFTR,
};
void exynos_firmware_init(void);
/* CPU BOOT mode flag for Exynos3250 SoC bootloader */
#define C2_STATE (1 << 3)
/*
* Magic values for bootloader indicating chosen low power mode.
* See also Documentation/arm/Samsung/Bootloader-interface.txt
*/
#define EXYNOS_SLEEP_MAGIC 0x00000bad
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
extern u32 exynos_get_eint_wake_mask(void);
#ifdef CONFIG_PM_SLEEP
extern void __init exynos_pm_init(void);
#else
static inline void exynos_pm_init(void) {}
#endif
extern void exynos_cpu_resume(void);
extern void exynos_cpu_resume_ns(void);
extern const struct smp_operations exynos_smp_ops;
extern void exynos_cpu_power_down(int cpu);
extern void exynos_cpu_power_up(int cpu);
extern int exynos_cpu_power_state(int cpu);
extern void exynos_cluster_power_down(int cluster);
extern void exynos_cluster_power_up(int cluster);
extern int exynos_cluster_power_state(int cluster);
extern void exynos_cpu_save_register(void);
extern void exynos_cpu_restore_register(void);
extern void exynos_pm_central_suspend(void);
extern int exynos_pm_central_resume(void);
extern void exynos_enter_aftr(void);
cpuidle: exynos: add coupled cpuidle support for exynos4210 The following patch adds coupled cpuidle support for Exynos4210 to an existing cpuidle-exynos driver. As a result it enables AFTR mode to be used by default on Exynos4210 without the need to hot unplug CPU1 first. The patch is heavily based on earlier cpuidle-exynos4210 driver from Daniel Lezcano: http://www.spinics.net/lists/linux-samsung-soc/msg28134.html Changes from Daniel's code include: - porting code to current kernels - fixing it to work on my setup (by using S5P_INFORM register instead of S5P_VA_SYSRAM one on Revison 1.1 and retrying poking CPU1 out of the BOOT ROM if necessary) - fixing rare lockup caused by waiting for CPU1 to get stuck in the BOOT ROM (CPU hotplug code in arch/arm/mach-exynos/platsmp.c doesn't require this and works fine) - moving Exynos specific code to arch/arm/mach-exynos/pm.c - using cpu_boot_reg_base() helper instead of BOOT_VECTOR macro - using exynos_cpu_*() helpers instead of accessing registers directly - using arch_send_wakeup_ipi_mask() instead of dsb_sev() (this matches CPU hotplug code in arch/arm/mach-exynos/platsmp.c) - integrating separate exynos4210-cpuidle driver into existing exynos-cpuidle one Cc: Colin Cross <ccross@google.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24 13:05:50 +08:00
extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
extern void exynos_set_delayed_reset_assertion(bool enable);
extern unsigned int samsung_rev(void);
extern void exynos_core_restart(u32 core_id);
extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
static inline void pmu_raw_writel(u32 val, u32 offset)
{
writel_relaxed(val, pmu_base_addr + offset);
}
static inline u32 pmu_raw_readl(u32 offset)
{
return readl_relaxed(pmu_base_addr + offset);
}
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */