linux/drivers/mmc/host/sdhci-of-at91.c

263 lines
7.1 KiB
C
Raw Normal View History

/*
* Atmel SDMMC controller driver.
*
* Copyright (C) 2015 Atmel,
* 2015 Ludovic Desroches <ludovic.desroches@atmel.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
#define SDMMC_CACR 0x230
#define SDMMC_CACR_CAPWREN BIT(0)
#define SDMMC_CACR_KEY (0x46 << 8)
struct sdhci_at91_priv {
struct clk *hclock;
struct clk *gck;
struct clk *mainck;
};
static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
.set_clock = sdhci_set_clock,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
};
static const struct sdhci_pltfm_data soc_data_sama5d2 = {
.ops = &sdhci_at91_sama5d2_ops,
.quirks2 = SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST,
};
static const struct of_device_id sdhci_at91_dt_match[] = {
{ .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 },
{}
};
#ifdef CONFIG_PM
static int sdhci_at91_runtime_suspend(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = pltfm_host->priv;
int ret;
ret = sdhci_runtime_suspend_host(host);
clk_disable_unprepare(priv->gck);
clk_disable_unprepare(priv->hclock);
clk_disable_unprepare(priv->mainck);
return ret;
}
static int sdhci_at91_runtime_resume(struct device *dev)
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = pltfm_host->priv;
int ret;
ret = clk_prepare_enable(priv->mainck);
if (ret) {
dev_err(dev, "can't enable mainck\n");
return ret;
}
ret = clk_prepare_enable(priv->hclock);
if (ret) {
dev_err(dev, "can't enable hclock\n");
return ret;
}
ret = clk_prepare_enable(priv->gck);
if (ret) {
dev_err(dev, "can't enable gck\n");
return ret;
}
return sdhci_runtime_resume_host(host);
}
#endif /* CONFIG_PM */
static const struct dev_pm_ops sdhci_at91_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend,
sdhci_at91_runtime_resume,
NULL)
};
static int sdhci_at91_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
const struct sdhci_pltfm_data *soc_data;
struct sdhci_host *host;
struct sdhci_pltfm_host *pltfm_host;
struct sdhci_at91_priv *priv;
unsigned int caps0, caps1;
unsigned int clk_base, clk_mul;
unsigned int gck_rate, real_gck_rate;
int ret;
match = of_match_device(sdhci_at91_dt_match, &pdev->dev);
if (!match)
return -EINVAL;
soc_data = match->data;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "unable to allocate private data\n");
return -ENOMEM;
}
priv->mainck = devm_clk_get(&pdev->dev, "baseclk");
if (IS_ERR(priv->mainck)) {
dev_err(&pdev->dev, "failed to get baseclk\n");
return PTR_ERR(priv->mainck);
}
priv->hclock = devm_clk_get(&pdev->dev, "hclock");
if (IS_ERR(priv->hclock)) {
dev_err(&pdev->dev, "failed to get hclock\n");
return PTR_ERR(priv->hclock);
}
priv->gck = devm_clk_get(&pdev->dev, "multclk");
if (IS_ERR(priv->gck)) {
dev_err(&pdev->dev, "failed to get multclk\n");
return PTR_ERR(priv->gck);
}
host = sdhci_pltfm_init(pdev, soc_data, 0);
if (IS_ERR(host))
return PTR_ERR(host);
/*
* The mult clock is provided by as a generated clock by the PMC
* controller. In order to set the rate of gck, we have to get the
* base clock rate and the clock mult from capabilities.
*/
clk_prepare_enable(priv->hclock);
caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES);
caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1);
clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT;
gck_rate = clk_base * 1000000 * (clk_mul + 1);
ret = clk_set_rate(priv->gck, gck_rate);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set gck");
goto hclock_disable_unprepare;
}
/*
* We need to check if we have the requested rate for gck because in
* some cases this rate could be not supported. If it happens, the rate
* is the closest one gck can provide. We have to update the value
* of clk mul.
*/
real_gck_rate = clk_get_rate(priv->gck);
if (real_gck_rate != gck_rate) {
clk_mul = real_gck_rate / (clk_base * 1000000) - 1;
caps1 &= (~SDHCI_CLOCK_MUL_MASK);
caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK);
/* Set capabilities in r/w mode. */
writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR);
writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1);
/* Set capabilities in ro mode. */
writel(0, host->ioaddr + SDMMC_CACR);
dev_info(&pdev->dev, "update clk mul to %u as gck rate is %u Hz\n",
clk_mul, real_gck_rate);
}
clk_prepare_enable(priv->mainck);
clk_prepare_enable(priv->gck);
pltfm_host = sdhci_priv(host);
pltfm_host->priv = priv;
ret = mmc_of_parse(host->mmc);
if (ret)
goto clocks_disable_unprepare;
sdhci_get_of_property(pdev);
pm_runtime_get_noresume(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
pm_runtime_use_autosuspend(&pdev->dev);
ret = sdhci_add_host(host);
if (ret)
goto pm_runtime_disable;
pm_runtime_put_autosuspend(&pdev->dev);
return 0;
pm_runtime_disable:
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
clocks_disable_unprepare:
clk_disable_unprepare(priv->gck);
clk_disable_unprepare(priv->mainck);
hclock_disable_unprepare:
clk_disable_unprepare(priv->hclock);
sdhci_pltfm_free(pdev);
return ret;
}
static int sdhci_at91_remove(struct platform_device *pdev)
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = pltfm_host->priv;
pm_runtime_get_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
sdhci_pltfm_unregister(pdev);
clk_disable_unprepare(priv->gck);
clk_disable_unprepare(priv->hclock);
clk_disable_unprepare(priv->mainck);
return 0;
}
static struct platform_driver sdhci_at91_driver = {
.driver = {
.name = "sdhci-at91",
.of_match_table = sdhci_at91_dt_match,
.pm = &sdhci_at91_dev_pm_ops,
},
.probe = sdhci_at91_probe,
.remove = sdhci_at91_remove,
};
module_platform_driver(sdhci_at91_driver);
MODULE_DESCRIPTION("SDHCI driver for at91");
MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
MODULE_LICENSE("GPL v2");