linux/kernel/bpf/memalloc.c

917 lines
24 KiB
C
Raw Normal View History

bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2022 Meta Platforms, Inc. and affiliates. */
#include <linux/mm.h>
#include <linux/llist.h>
#include <linux/bpf.h>
#include <linux/irq_work.h>
#include <linux/bpf_mem_alloc.h>
#include <linux/memcontrol.h>
#include <asm/local.h>
/* Any context (including NMI) BPF specific memory allocator.
*
* Tracing BPF programs can attach to kprobe and fentry. Hence they
* run in unknown context where calling plain kmalloc() might not be safe.
*
* Front-end kmalloc() with per-cpu per-bucket cache of free elements.
* Refill this cache asynchronously from irq_work.
*
* CPU_0 buckets
* 16 32 64 96 128 196 256 512 1024 2048 4096
* ...
* CPU_N buckets
* 16 32 64 96 128 196 256 512 1024 2048 4096
*
* The buckets are prefilled at the start.
* BPF programs always run with migration disabled.
* It's safe to allocate from cache of the current cpu with irqs disabled.
* Free-ing is always done into bucket of the current cpu as well.
* irq_work trims extra free elements from buckets with kfree
* and refills them with kmalloc, so global kmalloc logic takes care
* of freeing objects allocated by one cpu and freed on another.
*
* Every allocated objected is padded with extra 8 bytes that contains
* struct llist_node.
*/
#define LLIST_NODE_SZ sizeof(struct llist_node)
/* similar to kmalloc, but sizeof == 8 bucket is gone */
static u8 size_index[24] __ro_after_init = {
3, /* 8 */
3, /* 16 */
4, /* 24 */
4, /* 32 */
5, /* 40 */
5, /* 48 */
5, /* 56 */
5, /* 64 */
1, /* 72 */
1, /* 80 */
1, /* 88 */
1, /* 96 */
6, /* 104 */
6, /* 112 */
6, /* 120 */
6, /* 128 */
2, /* 136 */
2, /* 144 */
2, /* 152 */
2, /* 160 */
2, /* 168 */
2, /* 176 */
2, /* 184 */
2 /* 192 */
};
static int bpf_mem_cache_idx(size_t size)
{
if (!size || size > 4096)
return -1;
if (size <= 192)
return size_index[(size - 1) / 8] - 1;
return fls(size - 1) - 2;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
#define NUM_CACHES 11
struct bpf_mem_cache {
/* per-cpu list of free objects of size 'unit_size'.
* All accesses are done with interrupts disabled and 'active' counter
* protection with __llist_add() and __llist_del_first().
*/
struct llist_head free_llist;
local_t active;
/* Operations on the free_list from unit_alloc/unit_free/bpf_mem_refill
* are sequenced by per-cpu 'active' counter. But unit_free() cannot
* fail. When 'active' is busy the unit_free() will add an object to
* free_llist_extra.
*/
struct llist_head free_llist_extra;
struct irq_work refill_work;
struct obj_cgroup *objcg;
int unit_size;
/* count of objects in free_llist */
int free_cnt;
int low_watermark, high_watermark, batch;
int percpu_size;
bool draining;
struct bpf_mem_cache *tgt;
/* list of objects to be freed after RCU GP */
struct llist_head free_by_rcu;
struct llist_node *free_by_rcu_tail;
struct llist_head waiting_for_gp;
struct llist_node *waiting_for_gp_tail;
struct rcu_head rcu;
atomic_t call_rcu_in_progress;
struct llist_head free_llist_extra_rcu;
/* list of objects to be freed after RCU tasks trace GP */
struct llist_head free_by_rcu_ttrace;
struct llist_head waiting_for_gp_ttrace;
struct rcu_head rcu_ttrace;
atomic_t call_rcu_ttrace_in_progress;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
};
struct bpf_mem_caches {
struct bpf_mem_cache cache[NUM_CACHES];
};
static struct llist_node notrace *__llist_del_first(struct llist_head *head)
{
struct llist_node *entry, *next;
entry = head->first;
if (!entry)
return NULL;
next = entry->next;
head->first = next;
return entry;
}
static void *__alloc(struct bpf_mem_cache *c, int node, gfp_t flags)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
{
if (c->percpu_size) {
void **obj = kmalloc_node(c->percpu_size, flags, node);
void *pptr = __alloc_percpu_gfp(c->unit_size, 8, flags);
if (!obj || !pptr) {
free_percpu(pptr);
kfree(obj);
return NULL;
}
obj[1] = pptr;
return obj;
}
return kmalloc_node(c->unit_size, flags | __GFP_ZERO, node);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
static struct mem_cgroup *get_memcg(const struct bpf_mem_cache *c)
{
#ifdef CONFIG_MEMCG_KMEM
if (c->objcg)
return get_mem_cgroup_from_objcg(c->objcg);
#endif
#ifdef CONFIG_MEMCG
return root_mem_cgroup;
#else
return NULL;
#endif
}
static void inc_active(struct bpf_mem_cache *c, unsigned long *flags)
{
if (IS_ENABLED(CONFIG_PREEMPT_RT))
/* In RT irq_work runs in per-cpu kthread, so disable
* interrupts to avoid preemption and interrupts and
* reduce the chance of bpf prog executing on this cpu
* when active counter is busy.
*/
local_irq_save(*flags);
/* alloc_bulk runs from irq_work which will not preempt a bpf
* program that does unit_alloc/unit_free since IRQs are
* disabled there. There is no race to increment 'active'
* counter. It protects free_llist from corruption in case NMI
* bpf prog preempted this loop.
*/
WARN_ON_ONCE(local_inc_return(&c->active) != 1);
}
static void dec_active(struct bpf_mem_cache *c, unsigned long *flags)
{
local_dec(&c->active);
if (IS_ENABLED(CONFIG_PREEMPT_RT))
local_irq_restore(*flags);
}
static void add_obj_to_free_list(struct bpf_mem_cache *c, void *obj)
{
unsigned long flags;
inc_active(c, &flags);
__llist_add(obj, &c->free_llist);
c->free_cnt++;
dec_active(c, &flags);
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* Mostly runs from irq_work except __init phase. */
bpf: Non-atomically allocate freelist during prefill In internal testing of test_maps, we sometimes observed failures like: test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *): Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed. where the errno is ENOMEM. After some troubleshooting and enabling the warnings, we saw: [ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left [ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7 [ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023 [ 91.304721] Call Trace: [ 91.304724] <TASK> [ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88 [ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18 [ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870 [ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20 [ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0 [ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0 [ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650 [ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0 [ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0 [ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30 [ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80 [ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This makes sense, because in atomic context, percpu allocation would not create new chunks; it would only create in non-atomic contexts. And if during prefill all precpu chunks are full, -ENOMEM would happen immediately upon next unit_alloc. Prefill phase does not actually run in atomic context, so we can use this fact to allocate non-atomically with GFP_KERNEL instead of GFP_NOWAIT. This avoids the immediate -ENOMEM. GFP_NOWAIT has to be used in unit_alloc when bpf program runs in atomic context. Even if bpf program runs in non-atomic context, in most cases, rcu read lock is enabled for the program so GFP_NOWAIT is still needed. This is often also the case for BPF_MAP_UPDATE_ELEM syscalls. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-28 12:33:59 +08:00
static void alloc_bulk(struct bpf_mem_cache *c, int cnt, int node, bool atomic)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
{
struct mem_cgroup *memcg = NULL, *old_memcg;
bpf: Non-atomically allocate freelist during prefill In internal testing of test_maps, we sometimes observed failures like: test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *): Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed. where the errno is ENOMEM. After some troubleshooting and enabling the warnings, we saw: [ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left [ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7 [ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023 [ 91.304721] Call Trace: [ 91.304724] <TASK> [ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88 [ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18 [ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870 [ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20 [ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0 [ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0 [ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650 [ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0 [ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0 [ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30 [ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80 [ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This makes sense, because in atomic context, percpu allocation would not create new chunks; it would only create in non-atomic contexts. And if during prefill all precpu chunks are full, -ENOMEM would happen immediately upon next unit_alloc. Prefill phase does not actually run in atomic context, so we can use this fact to allocate non-atomically with GFP_KERNEL instead of GFP_NOWAIT. This avoids the immediate -ENOMEM. GFP_NOWAIT has to be used in unit_alloc when bpf program runs in atomic context. Even if bpf program runs in non-atomic context, in most cases, rcu read lock is enabled for the program so GFP_NOWAIT is still needed. This is often also the case for BPF_MAP_UPDATE_ELEM syscalls. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-28 12:33:59 +08:00
gfp_t gfp;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
void *obj;
int i;
bpf: Non-atomically allocate freelist during prefill In internal testing of test_maps, we sometimes observed failures like: test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *): Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed. where the errno is ENOMEM. After some troubleshooting and enabling the warnings, we saw: [ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left [ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7 [ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023 [ 91.304721] Call Trace: [ 91.304724] <TASK> [ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88 [ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18 [ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870 [ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20 [ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0 [ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0 [ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650 [ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0 [ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0 [ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30 [ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80 [ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This makes sense, because in atomic context, percpu allocation would not create new chunks; it would only create in non-atomic contexts. And if during prefill all precpu chunks are full, -ENOMEM would happen immediately upon next unit_alloc. Prefill phase does not actually run in atomic context, so we can use this fact to allocate non-atomically with GFP_KERNEL instead of GFP_NOWAIT. This avoids the immediate -ENOMEM. GFP_NOWAIT has to be used in unit_alloc when bpf program runs in atomic context. Even if bpf program runs in non-atomic context, in most cases, rcu read lock is enabled for the program so GFP_NOWAIT is still needed. This is often also the case for BPF_MAP_UPDATE_ELEM syscalls. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-28 12:33:59 +08:00
gfp = __GFP_NOWARN | __GFP_ACCOUNT;
gfp |= atomic ? GFP_NOWAIT : GFP_KERNEL;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
for (i = 0; i < cnt; i++) {
/*
* For every 'c' llist_del_first(&c->free_by_rcu_ttrace); is
* done only by one CPU == current CPU. Other CPUs might
* llist_add() and llist_del_all() in parallel.
*/
obj = llist_del_first(&c->free_by_rcu_ttrace);
if (!obj)
break;
add_obj_to_free_list(c, obj);
}
if (i >= cnt)
return;
for (; i < cnt; i++) {
obj = llist_del_first(&c->waiting_for_gp_ttrace);
if (!obj)
break;
add_obj_to_free_list(c, obj);
}
if (i >= cnt)
return;
memcg = get_memcg(c);
old_memcg = set_active_memcg(memcg);
for (; i < cnt; i++) {
/* Allocate, but don't deplete atomic reserves that typical
* GFP_ATOMIC would do. irq_work runs on this cpu and kmalloc
* will allocate from the current numa node which is what we
* want here.
*/
bpf: Non-atomically allocate freelist during prefill In internal testing of test_maps, we sometimes observed failures like: test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *): Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed. where the errno is ENOMEM. After some troubleshooting and enabling the warnings, we saw: [ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left [ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7 [ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023 [ 91.304721] Call Trace: [ 91.304724] <TASK> [ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88 [ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18 [ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870 [ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20 [ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0 [ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0 [ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650 [ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0 [ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0 [ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30 [ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80 [ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This makes sense, because in atomic context, percpu allocation would not create new chunks; it would only create in non-atomic contexts. And if during prefill all precpu chunks are full, -ENOMEM would happen immediately upon next unit_alloc. Prefill phase does not actually run in atomic context, so we can use this fact to allocate non-atomically with GFP_KERNEL instead of GFP_NOWAIT. This avoids the immediate -ENOMEM. GFP_NOWAIT has to be used in unit_alloc when bpf program runs in atomic context. Even if bpf program runs in non-atomic context, in most cases, rcu read lock is enabled for the program so GFP_NOWAIT is still needed. This is often also the case for BPF_MAP_UPDATE_ELEM syscalls. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-28 12:33:59 +08:00
obj = __alloc(c, node, gfp);
if (!obj)
break;
add_obj_to_free_list(c, obj);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
set_active_memcg(old_memcg);
mem_cgroup_put(memcg);
}
static void free_one(void *obj, bool percpu)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
{
if (percpu) {
free_percpu(((void **)obj)[1]);
kfree(obj);
return;
}
kfree(obj);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
static int free_all(struct llist_node *llnode, bool percpu)
{
struct llist_node *pos, *t;
int cnt = 0;
llist_for_each_safe(pos, t, llnode) {
free_one(pos, percpu);
cnt++;
}
return cnt;
}
static void __free_rcu(struct rcu_head *head)
{
struct bpf_mem_cache *c = container_of(head, struct bpf_mem_cache, rcu_ttrace);
free_all(llist_del_all(&c->waiting_for_gp_ttrace), !!c->percpu_size);
atomic_set(&c->call_rcu_ttrace_in_progress, 0);
}
static void __free_rcu_tasks_trace(struct rcu_head *head)
{
/* If RCU Tasks Trace grace period implies RCU grace period,
* there is no need to invoke call_rcu().
*/
if (rcu_trace_implies_rcu_gp())
__free_rcu(head);
else
call_rcu(head, __free_rcu);
}
static void enque_to_free(struct bpf_mem_cache *c, void *obj)
{
struct llist_node *llnode = obj;
/* bpf_mem_cache is a per-cpu object. Freeing happens in irq_work.
* Nothing races to add to free_by_rcu_ttrace list.
*/
llist_add(llnode, &c->free_by_rcu_ttrace);
}
static void do_call_rcu_ttrace(struct bpf_mem_cache *c)
{
struct llist_node *llnode, *t;
if (atomic_xchg(&c->call_rcu_ttrace_in_progress, 1)) {
if (unlikely(READ_ONCE(c->draining))) {
llnode = llist_del_all(&c->free_by_rcu_ttrace);
free_all(llnode, !!c->percpu_size);
}
return;
}
WARN_ON_ONCE(!llist_empty(&c->waiting_for_gp_ttrace));
llist_for_each_safe(llnode, t, llist_del_all(&c->free_by_rcu_ttrace))
llist_add(llnode, &c->waiting_for_gp_ttrace);
if (unlikely(READ_ONCE(c->draining))) {
__free_rcu(&c->rcu_ttrace);
return;
}
/* Use call_rcu_tasks_trace() to wait for sleepable progs to finish.
* If RCU Tasks Trace grace period implies RCU grace period, free
* these elements directly, else use call_rcu() to wait for normal
* progs to finish and finally do free_one() on each element.
*/
call_rcu_tasks_trace(&c->rcu_ttrace, __free_rcu_tasks_trace);
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
static void free_bulk(struct bpf_mem_cache *c)
{
struct bpf_mem_cache *tgt = c->tgt;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
struct llist_node *llnode, *t;
unsigned long flags;
int cnt;
WARN_ON_ONCE(tgt->unit_size != c->unit_size);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
do {
inc_active(c, &flags);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
llnode = __llist_del_first(&c->free_llist);
if (llnode)
cnt = --c->free_cnt;
else
cnt = 0;
dec_active(c, &flags);
if (llnode)
enque_to_free(tgt, llnode);
} while (cnt > (c->high_watermark + c->low_watermark) / 2);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* and drain free_llist_extra */
llist_for_each_safe(llnode, t, llist_del_all(&c->free_llist_extra))
enque_to_free(tgt, llnode);
do_call_rcu_ttrace(tgt);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
static void __free_by_rcu(struct rcu_head *head)
{
struct bpf_mem_cache *c = container_of(head, struct bpf_mem_cache, rcu);
struct bpf_mem_cache *tgt = c->tgt;
struct llist_node *llnode;
llnode = llist_del_all(&c->waiting_for_gp);
if (!llnode)
goto out;
llist_add_batch(llnode, c->waiting_for_gp_tail, &tgt->free_by_rcu_ttrace);
/* Objects went through regular RCU GP. Send them to RCU tasks trace */
do_call_rcu_ttrace(tgt);
out:
atomic_set(&c->call_rcu_in_progress, 0);
}
static void check_free_by_rcu(struct bpf_mem_cache *c)
{
struct llist_node *llnode, *t;
unsigned long flags;
/* drain free_llist_extra_rcu */
if (unlikely(!llist_empty(&c->free_llist_extra_rcu))) {
inc_active(c, &flags);
llist_for_each_safe(llnode, t, llist_del_all(&c->free_llist_extra_rcu))
if (__llist_add(llnode, &c->free_by_rcu))
c->free_by_rcu_tail = llnode;
dec_active(c, &flags);
}
if (llist_empty(&c->free_by_rcu))
return;
if (atomic_xchg(&c->call_rcu_in_progress, 1)) {
/*
* Instead of kmalloc-ing new rcu_head and triggering 10k
* call_rcu() to hit rcutree.qhimark and force RCU to notice
* the overload just ask RCU to hurry up. There could be many
* objects in free_by_rcu list.
* This hint reduces memory consumption for an artificial
* benchmark from 2 Gbyte to 150 Mbyte.
*/
rcu_request_urgent_qs_task(current);
return;
}
WARN_ON_ONCE(!llist_empty(&c->waiting_for_gp));
inc_active(c, &flags);
WRITE_ONCE(c->waiting_for_gp.first, __llist_del_all(&c->free_by_rcu));
c->waiting_for_gp_tail = c->free_by_rcu_tail;
dec_active(c, &flags);
if (unlikely(READ_ONCE(c->draining))) {
free_all(llist_del_all(&c->waiting_for_gp), !!c->percpu_size);
atomic_set(&c->call_rcu_in_progress, 0);
} else {
call_rcu_hurry(&c->rcu, __free_by_rcu);
}
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
static void bpf_mem_refill(struct irq_work *work)
{
struct bpf_mem_cache *c = container_of(work, struct bpf_mem_cache, refill_work);
int cnt;
/* Racy access to free_cnt. It doesn't need to be 100% accurate */
cnt = c->free_cnt;
if (cnt < c->low_watermark)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* irq_work runs on this cpu and kmalloc will allocate
* from the current numa node which is what we want here.
*/
bpf: Non-atomically allocate freelist during prefill In internal testing of test_maps, we sometimes observed failures like: test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *): Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed. where the errno is ENOMEM. After some troubleshooting and enabling the warnings, we saw: [ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left [ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7 [ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023 [ 91.304721] Call Trace: [ 91.304724] <TASK> [ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88 [ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18 [ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870 [ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20 [ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0 [ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0 [ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650 [ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0 [ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0 [ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30 [ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80 [ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This makes sense, because in atomic context, percpu allocation would not create new chunks; it would only create in non-atomic contexts. And if during prefill all precpu chunks are full, -ENOMEM would happen immediately upon next unit_alloc. Prefill phase does not actually run in atomic context, so we can use this fact to allocate non-atomically with GFP_KERNEL instead of GFP_NOWAIT. This avoids the immediate -ENOMEM. GFP_NOWAIT has to be used in unit_alloc when bpf program runs in atomic context. Even if bpf program runs in non-atomic context, in most cases, rcu read lock is enabled for the program so GFP_NOWAIT is still needed. This is often also the case for BPF_MAP_UPDATE_ELEM syscalls. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-28 12:33:59 +08:00
alloc_bulk(c, c->batch, NUMA_NO_NODE, true);
else if (cnt > c->high_watermark)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
free_bulk(c);
check_free_by_rcu(c);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
static void notrace irq_work_raise(struct bpf_mem_cache *c)
{
irq_work_queue(&c->refill_work);
}
/* For typical bpf map case that uses bpf_mem_cache_alloc and single bucket
* the freelist cache will be elem_size * 64 (or less) on each cpu.
*
* For bpf programs that don't have statically known allocation sizes and
* assuming (low_mark + high_mark) / 2 as an average number of elements per
* bucket and all buckets are used the total amount of memory in freelists
* on each cpu will be:
* 64*16 + 64*32 + 64*64 + 64*96 + 64*128 + 64*196 + 64*256 + 32*512 + 16*1024 + 8*2048 + 4*4096
* == ~ 116 Kbyte using below heuristic.
* Initialized, but unused bpf allocator (not bpf map specific one) will
* consume ~ 11 Kbyte per cpu.
* Typical case will be between 11K and 116K closer to 11K.
* bpf progs can and should share bpf_mem_cache when possible.
*/
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
static void prefill_mem_cache(struct bpf_mem_cache *c, int cpu)
{
init_irq_work(&c->refill_work, bpf_mem_refill);
if (c->unit_size <= 256) {
c->low_watermark = 32;
c->high_watermark = 96;
} else {
/* When page_size == 4k, order-0 cache will have low_mark == 2
* and high_mark == 6 with batch alloc of 3 individual pages at
* a time.
* 8k allocs and above low == 1, high == 3, batch == 1.
*/
c->low_watermark = max(32 * 256 / c->unit_size, 1);
c->high_watermark = max(96 * 256 / c->unit_size, 3);
}
c->batch = max((c->high_watermark - c->low_watermark) / 4 * 3, 1);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* To avoid consuming memory assume that 1st run of bpf
* prog won't be doing more than 4 map_update_elem from
* irq disabled region
*/
bpf: Non-atomically allocate freelist during prefill In internal testing of test_maps, we sometimes observed failures like: test_maps: test_maps.c:173: void test_hashmap_percpu(unsigned int, void *): Assertion `bpf_map_update_elem(fd, &key, value, BPF_ANY) == 0' failed. where the errno is ENOMEM. After some troubleshooting and enabling the warnings, we saw: [ 91.304708] percpu: allocation failed, size=8 align=8 atomic=1, atomic alloc failed, no space left [ 91.304716] CPU: 51 PID: 24145 Comm: test_maps Kdump: loaded Tainted: G N 6.1.38-smp-DEV #7 [ 91.304719] Hardware name: Google Astoria/astoria, BIOS 0.20230627.0-0 06/27/2023 [ 91.304721] Call Trace: [ 91.304724] <TASK> [ 91.304730] [<ffffffffa7ef83b9>] dump_stack_lvl+0x59/0x88 [ 91.304737] [<ffffffffa7ef83f8>] dump_stack+0x10/0x18 [ 91.304738] [<ffffffffa75caa0c>] pcpu_alloc+0x6fc/0x870 [ 91.304741] [<ffffffffa75ca302>] __alloc_percpu_gfp+0x12/0x20 [ 91.304743] [<ffffffffa756785e>] alloc_bulk+0xde/0x1e0 [ 91.304746] [<ffffffffa7566c02>] bpf_mem_alloc_init+0xd2/0x2f0 [ 91.304747] [<ffffffffa7547c69>] htab_map_alloc+0x479/0x650 [ 91.304750] [<ffffffffa751d6e0>] map_create+0x140/0x2e0 [ 91.304752] [<ffffffffa751d413>] __sys_bpf+0x5a3/0x6c0 [ 91.304753] [<ffffffffa751c3ec>] __x64_sys_bpf+0x1c/0x30 [ 91.304754] [<ffffffffa7ef847a>] do_syscall_64+0x5a/0x80 [ 91.304756] [<ffffffffa800009b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd This makes sense, because in atomic context, percpu allocation would not create new chunks; it would only create in non-atomic contexts. And if during prefill all precpu chunks are full, -ENOMEM would happen immediately upon next unit_alloc. Prefill phase does not actually run in atomic context, so we can use this fact to allocate non-atomically with GFP_KERNEL instead of GFP_NOWAIT. This avoids the immediate -ENOMEM. GFP_NOWAIT has to be used in unit_alloc when bpf program runs in atomic context. Even if bpf program runs in non-atomic context, in most cases, rcu read lock is enabled for the program so GFP_NOWAIT is still needed. This is often also the case for BPF_MAP_UPDATE_ELEM syscalls. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230728043359.3324347-1-zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-07-28 12:33:59 +08:00
alloc_bulk(c, c->unit_size <= 256 ? 4 : 1, cpu_to_node(cpu), false);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
/* When size != 0 bpf_mem_cache for each cpu.
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
* This is typical bpf hash map use case when all elements have equal size.
*
* When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on
* kmalloc/kfree. Max allocation size is 4096 in this case.
* This is bpf_dynptr and bpf_kptr use case.
*/
int bpf_mem_alloc_init(struct bpf_mem_alloc *ma, int size, bool percpu)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
{
static u16 sizes[NUM_CACHES] = {96, 192, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096};
struct bpf_mem_caches *cc, __percpu *pcc;
struct bpf_mem_cache *c, __percpu *pc;
struct obj_cgroup *objcg = NULL;
int cpu, i, unit_size, percpu_size = 0;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* room for llist_node and per-cpu pointer */
if (percpu)
percpu_size = LLIST_NODE_SZ + sizeof(void *);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
if (size) {
pc = __alloc_percpu_gfp(sizeof(*pc), 8, GFP_KERNEL);
if (!pc)
return -ENOMEM;
if (!percpu)
size += LLIST_NODE_SZ; /* room for llist_node */
unit_size = size;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
#ifdef CONFIG_MEMCG_KMEM
if (memcg_bpf_enabled())
objcg = get_obj_cgroup_from_current();
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
#endif
for_each_possible_cpu(cpu) {
c = per_cpu_ptr(pc, cpu);
c->unit_size = unit_size;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
c->objcg = objcg;
c->percpu_size = percpu_size;
c->tgt = c;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
prefill_mem_cache(c, cpu);
}
ma->cache = pc;
return 0;
}
pcc = __alloc_percpu_gfp(sizeof(*cc), 8, GFP_KERNEL);
if (!pcc)
return -ENOMEM;
#ifdef CONFIG_MEMCG_KMEM
objcg = get_obj_cgroup_from_current();
#endif
for_each_possible_cpu(cpu) {
cc = per_cpu_ptr(pcc, cpu);
for (i = 0; i < NUM_CACHES; i++) {
c = &cc->cache[i];
c->unit_size = sizes[i];
c->objcg = objcg;
c->percpu_size = percpu_size;
c->tgt = c;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
prefill_mem_cache(c, cpu);
}
}
ma->caches = pcc;
return 0;
}
static void drain_mem_cache(struct bpf_mem_cache *c)
{
bool percpu = !!c->percpu_size;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* No progs are using this bpf_mem_cache, but htab_map_free() called
* bpf_mem_cache_free() for all remaining elements and they can be in
* free_by_rcu_ttrace or in waiting_for_gp_ttrace lists, so drain those lists now.
*
* Except for waiting_for_gp_ttrace list, there are no concurrent operations
* on these lists, so it is safe to use __llist_del_all().
*/
free_all(llist_del_all(&c->free_by_rcu_ttrace), percpu);
free_all(llist_del_all(&c->waiting_for_gp_ttrace), percpu);
free_all(__llist_del_all(&c->free_llist), percpu);
free_all(__llist_del_all(&c->free_llist_extra), percpu);
free_all(__llist_del_all(&c->free_by_rcu), percpu);
free_all(__llist_del_all(&c->free_llist_extra_rcu), percpu);
free_all(llist_del_all(&c->waiting_for_gp), percpu);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
static void check_mem_cache(struct bpf_mem_cache *c)
{
WARN_ON_ONCE(!llist_empty(&c->free_by_rcu_ttrace));
WARN_ON_ONCE(!llist_empty(&c->waiting_for_gp_ttrace));
WARN_ON_ONCE(!llist_empty(&c->free_llist));
WARN_ON_ONCE(!llist_empty(&c->free_llist_extra));
WARN_ON_ONCE(!llist_empty(&c->free_by_rcu));
WARN_ON_ONCE(!llist_empty(&c->free_llist_extra_rcu));
WARN_ON_ONCE(!llist_empty(&c->waiting_for_gp));
}
static void check_leaked_objs(struct bpf_mem_alloc *ma)
{
struct bpf_mem_caches *cc;
struct bpf_mem_cache *c;
int cpu, i;
if (ma->cache) {
for_each_possible_cpu(cpu) {
c = per_cpu_ptr(ma->cache, cpu);
check_mem_cache(c);
}
}
if (ma->caches) {
for_each_possible_cpu(cpu) {
cc = per_cpu_ptr(ma->caches, cpu);
for (i = 0; i < NUM_CACHES; i++) {
c = &cc->cache[i];
check_mem_cache(c);
}
}
}
}
static void free_mem_alloc_no_barrier(struct bpf_mem_alloc *ma)
{
check_leaked_objs(ma);
free_percpu(ma->cache);
free_percpu(ma->caches);
ma->cache = NULL;
ma->caches = NULL;
}
static void free_mem_alloc(struct bpf_mem_alloc *ma)
{
/* waiting_for_gp[_ttrace] lists were drained, but RCU callbacks
* might still execute. Wait for them.
*
* rcu_barrier_tasks_trace() doesn't imply synchronize_rcu_tasks_trace(),
* but rcu_barrier_tasks_trace() and rcu_barrier() below are only used
* to wait for the pending __free_rcu_tasks_trace() and __free_rcu(),
* so if call_rcu(head, __free_rcu) is skipped due to
* rcu_trace_implies_rcu_gp(), it will be OK to skip rcu_barrier() by
* using rcu_trace_implies_rcu_gp() as well.
*/
rcu_barrier(); /* wait for __free_by_rcu */
rcu_barrier_tasks_trace(); /* wait for __free_rcu */
if (!rcu_trace_implies_rcu_gp())
rcu_barrier();
free_mem_alloc_no_barrier(ma);
}
static void free_mem_alloc_deferred(struct work_struct *work)
{
struct bpf_mem_alloc *ma = container_of(work, struct bpf_mem_alloc, work);
free_mem_alloc(ma);
kfree(ma);
}
static void destroy_mem_alloc(struct bpf_mem_alloc *ma, int rcu_in_progress)
{
struct bpf_mem_alloc *copy;
if (!rcu_in_progress) {
/* Fast path. No callbacks are pending, hence no need to do
* rcu_barrier-s.
*/
free_mem_alloc_no_barrier(ma);
return;
}
copy = kmemdup(ma, sizeof(*ma), GFP_KERNEL);
if (!copy) {
/* Slow path with inline barrier-s */
free_mem_alloc(ma);
return;
}
/* Defer barriers into worker to let the rest of map memory to be freed */
memset(ma, 0, sizeof(*ma));
INIT_WORK(&copy->work, free_mem_alloc_deferred);
queue_work(system_unbound_wq, &copy->work);
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
void bpf_mem_alloc_destroy(struct bpf_mem_alloc *ma)
{
struct bpf_mem_caches *cc;
struct bpf_mem_cache *c;
int cpu, i, rcu_in_progress;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
if (ma->cache) {
rcu_in_progress = 0;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
for_each_possible_cpu(cpu) {
c = per_cpu_ptr(ma->cache, cpu);
WRITE_ONCE(c->draining, true);
bpf: Wait for busy refill_work when destroying bpf memory allocator A busy irq work is an unfinished irq work and it can be either in the pending state or in the running state. When destroying bpf memory allocator, refill_work may be busy for PREEMPT_RT kernel in which irq work is invoked in a per-CPU RT-kthread. It is also possible for kernel with arch_irq_work_has_interrupt() being false (e.g. 1-cpu arm32 host or mips) and irq work is inovked in timer interrupt. The busy refill_work leads to various issues. The obvious one is that there will be concurrent operations on free_by_rcu and free_list between irq work and memory draining. Another one is call_rcu_in_progress will not be reliable for the checking of pending RCU callback because do_call_rcu() may have not been invoked by irq work yet. The other is there will be use-after-free if irq work is freed before the callback of irq work is invoked as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 12ab94067 P4D 12ab94067 PUD 1796b4067 PMD 0 Oops: 0010 [#1] PREEMPT_RT SMP CPU: 5 PID: 64 Comm: irq_work/5 Not tainted 6.0.0-rt11+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffadc080293e78 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffcdc07fb6a388 RCX: ffffa05000a2e000 RDX: ffffa05000a2e000 RSI: ffffffff96cc9827 RDI: ffffcdc07fb6a388 ...... Call Trace: <TASK> irq_work_single+0x24/0x60 irq_work_run_list+0x24/0x30 run_irq_workd+0x23/0x30 smpboot_thread_fn+0x203/0x300 kthread+0x126/0x150 ret_from_fork+0x1f/0x30 </TASK> Considering the ease of concurrency handling, no overhead for irq_work_sync() under non-PREEMPT_RT kernel and has-irq-work-interrupt kernel and the short wait time used for irq_work_sync() under PREEMPT_RT (When running two test_maps on PREEMPT_RT kernel and 72-cpus host, the max wait time is about 8ms and the 99th percentile is 10us), just using irq_work_sync() to wait for busy refill_work to complete before memory draining and memory freeing. Fixes: 7c8199e24fa0 ("bpf: Introduce any context BPF specific memory allocator.") Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20221021114913.60508-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-21 19:49:12 +08:00
irq_work_sync(&c->refill_work);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
drain_mem_cache(c);
rcu_in_progress += atomic_read(&c->call_rcu_ttrace_in_progress);
rcu_in_progress += atomic_read(&c->call_rcu_in_progress);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
/* objcg is the same across cpus */
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
if (c->objcg)
obj_cgroup_put(c->objcg);
destroy_mem_alloc(ma, rcu_in_progress);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
if (ma->caches) {
rcu_in_progress = 0;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
for_each_possible_cpu(cpu) {
cc = per_cpu_ptr(ma->caches, cpu);
for (i = 0; i < NUM_CACHES; i++) {
c = &cc->cache[i];
WRITE_ONCE(c->draining, true);
bpf: Wait for busy refill_work when destroying bpf memory allocator A busy irq work is an unfinished irq work and it can be either in the pending state or in the running state. When destroying bpf memory allocator, refill_work may be busy for PREEMPT_RT kernel in which irq work is invoked in a per-CPU RT-kthread. It is also possible for kernel with arch_irq_work_has_interrupt() being false (e.g. 1-cpu arm32 host or mips) and irq work is inovked in timer interrupt. The busy refill_work leads to various issues. The obvious one is that there will be concurrent operations on free_by_rcu and free_list between irq work and memory draining. Another one is call_rcu_in_progress will not be reliable for the checking of pending RCU callback because do_call_rcu() may have not been invoked by irq work yet. The other is there will be use-after-free if irq work is freed before the callback of irq work is invoked as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page PGD 12ab94067 P4D 12ab94067 PUD 1796b4067 PMD 0 Oops: 0010 [#1] PREEMPT_RT SMP CPU: 5 PID: 64 Comm: irq_work/5 Not tainted 6.0.0-rt11+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffffadc080293e78 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffffcdc07fb6a388 RCX: ffffa05000a2e000 RDX: ffffa05000a2e000 RSI: ffffffff96cc9827 RDI: ffffcdc07fb6a388 ...... Call Trace: <TASK> irq_work_single+0x24/0x60 irq_work_run_list+0x24/0x30 run_irq_workd+0x23/0x30 smpboot_thread_fn+0x203/0x300 kthread+0x126/0x150 ret_from_fork+0x1f/0x30 </TASK> Considering the ease of concurrency handling, no overhead for irq_work_sync() under non-PREEMPT_RT kernel and has-irq-work-interrupt kernel and the short wait time used for irq_work_sync() under PREEMPT_RT (When running two test_maps on PREEMPT_RT kernel and 72-cpus host, the max wait time is about 8ms and the 99th percentile is 10us), just using irq_work_sync() to wait for busy refill_work to complete before memory draining and memory freeing. Fixes: 7c8199e24fa0 ("bpf: Introduce any context BPF specific memory allocator.") Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20221021114913.60508-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-21 19:49:12 +08:00
irq_work_sync(&c->refill_work);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
drain_mem_cache(c);
rcu_in_progress += atomic_read(&c->call_rcu_ttrace_in_progress);
rcu_in_progress += atomic_read(&c->call_rcu_in_progress);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
}
if (c->objcg)
obj_cgroup_put(c->objcg);
destroy_mem_alloc(ma, rcu_in_progress);
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
}
/* notrace is necessary here and in other functions to make sure
* bpf programs cannot attach to them and cause llist corruptions.
*/
static void notrace *unit_alloc(struct bpf_mem_cache *c)
{
struct llist_node *llnode = NULL;
unsigned long flags;
int cnt = 0;
/* Disable irqs to prevent the following race for majority of prog types:
* prog_A
* bpf_mem_alloc
* preemption or irq -> prog_B
* bpf_mem_alloc
*
* but prog_B could be a perf_event NMI prog.
* Use per-cpu 'active' counter to order free_list access between
* unit_alloc/unit_free/bpf_mem_refill.
*/
local_irq_save(flags);
if (local_inc_return(&c->active) == 1) {
llnode = __llist_del_first(&c->free_llist);
if (llnode) {
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
cnt = --c->free_cnt;
*(struct bpf_mem_cache **)llnode = c;
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
}
local_dec(&c->active);
local_irq_restore(flags);
WARN_ON(cnt < 0);
if (cnt < c->low_watermark)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
irq_work_raise(c);
return llnode;
}
/* Though 'ptr' object could have been allocated on a different cpu
* add it to the free_llist of the current cpu.
* Let kfree() logic deal with it when it's later called from irq_work.
*/
static void notrace unit_free(struct bpf_mem_cache *c, void *ptr)
{
struct llist_node *llnode = ptr - LLIST_NODE_SZ;
unsigned long flags;
int cnt = 0;
BUILD_BUG_ON(LLIST_NODE_SZ > 8);
/*
* Remember bpf_mem_cache that allocated this object.
* The hint is not accurate.
*/
c->tgt = *(struct bpf_mem_cache **)llnode;
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
local_irq_save(flags);
if (local_inc_return(&c->active) == 1) {
__llist_add(llnode, &c->free_llist);
cnt = ++c->free_cnt;
} else {
/* unit_free() cannot fail. Therefore add an object to atomic
* llist. free_bulk() will drain it. Though free_llist_extra is
* a per-cpu list we have to use atomic llist_add here, since
* it also can be interrupted by bpf nmi prog that does another
* unit_free() into the same free_llist_extra.
*/
llist_add(llnode, &c->free_llist_extra);
}
local_dec(&c->active);
local_irq_restore(flags);
if (cnt > c->high_watermark)
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* free few objects from current cpu into global kmalloc pool */
irq_work_raise(c);
}
static void notrace unit_free_rcu(struct bpf_mem_cache *c, void *ptr)
{
struct llist_node *llnode = ptr - LLIST_NODE_SZ;
unsigned long flags;
c->tgt = *(struct bpf_mem_cache **)llnode;
local_irq_save(flags);
if (local_inc_return(&c->active) == 1) {
if (__llist_add(llnode, &c->free_by_rcu))
c->free_by_rcu_tail = llnode;
} else {
llist_add(llnode, &c->free_llist_extra_rcu);
}
local_dec(&c->active);
local_irq_restore(flags);
if (!atomic_read(&c->call_rcu_in_progress))
irq_work_raise(c);
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
/* Called from BPF program or from sys_bpf syscall.
* In both cases migration is disabled.
*/
void notrace *bpf_mem_alloc(struct bpf_mem_alloc *ma, size_t size)
{
int idx;
void *ret;
if (!size)
return ZERO_SIZE_PTR;
idx = bpf_mem_cache_idx(size + LLIST_NODE_SZ);
if (idx < 0)
return NULL;
ret = unit_alloc(this_cpu_ptr(ma->caches)->cache + idx);
return !ret ? NULL : ret + LLIST_NODE_SZ;
}
void notrace bpf_mem_free(struct bpf_mem_alloc *ma, void *ptr)
{
int idx;
if (!ptr)
return;
idx = bpf_mem_cache_idx(ksize(ptr - LLIST_NODE_SZ));
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
if (idx < 0)
return;
unit_free(this_cpu_ptr(ma->caches)->cache + idx, ptr);
}
void notrace bpf_mem_free_rcu(struct bpf_mem_alloc *ma, void *ptr)
{
int idx;
if (!ptr)
return;
idx = bpf_mem_cache_idx(ksize(ptr - LLIST_NODE_SZ));
if (idx < 0)
return;
unit_free_rcu(this_cpu_ptr(ma->caches)->cache + idx, ptr);
}
bpf: Introduce any context BPF specific memory allocator. Tracing BPF programs can attach to kprobe and fentry. Hence they run in unknown context where calling plain kmalloc() might not be safe. Front-end kmalloc() with minimal per-cpu cache of free elements. Refill this cache asynchronously from irq_work. BPF programs always run with migration disabled. It's safe to allocate from cache of the current cpu with irqs disabled. Free-ing is always done into bucket of the current cpu as well. irq_work trims extra free elements from buckets with kfree and refills them with kmalloc, so global kmalloc logic takes care of freeing objects allocated by one cpu and freed on another. struct bpf_mem_alloc supports two modes: - When size != 0 create kmem_cache and bpf_mem_cache for each cpu. This is typical bpf hash map use case when all elements have equal size. - When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on kmalloc/kfree. Max allocation size is 4096 in this case. This is bpf_dynptr and bpf_kptr use case. bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree. bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free. The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
2022-09-03 05:10:43 +08:00
void notrace *bpf_mem_cache_alloc(struct bpf_mem_alloc *ma)
{
void *ret;
ret = unit_alloc(this_cpu_ptr(ma->cache));
return !ret ? NULL : ret + LLIST_NODE_SZ;
}
void notrace bpf_mem_cache_free(struct bpf_mem_alloc *ma, void *ptr)
{
if (!ptr)
return;
unit_free(this_cpu_ptr(ma->cache), ptr);
}
void notrace bpf_mem_cache_free_rcu(struct bpf_mem_alloc *ma, void *ptr)
{
if (!ptr)
return;
unit_free_rcu(this_cpu_ptr(ma->cache), ptr);
}
/* Directly does a kfree() without putting 'ptr' back to the free_llist
* for reuse and without waiting for a rcu_tasks_trace gp.
* The caller must first go through the rcu_tasks_trace gp for 'ptr'
* before calling bpf_mem_cache_raw_free().
* It could be used when the rcu_tasks_trace callback does not have
* a hold on the original bpf_mem_alloc object that allocated the
* 'ptr'. This should only be used in the uncommon code path.
* Otherwise, the bpf_mem_alloc's free_llist cannot be refilled
* and may affect performance.
*/
void bpf_mem_cache_raw_free(void *ptr)
{
if (!ptr)
return;
kfree(ptr - LLIST_NODE_SZ);
}
/* When flags == GFP_KERNEL, it signals that the caller will not cause
* deadlock when using kmalloc. bpf_mem_cache_alloc_flags() will use
* kmalloc if the free_llist is empty.
*/
void notrace *bpf_mem_cache_alloc_flags(struct bpf_mem_alloc *ma, gfp_t flags)
{
struct bpf_mem_cache *c;
void *ret;
c = this_cpu_ptr(ma->cache);
ret = unit_alloc(c);
if (!ret && flags == GFP_KERNEL) {
struct mem_cgroup *memcg, *old_memcg;
memcg = get_memcg(c);
old_memcg = set_active_memcg(memcg);
ret = __alloc(c, NUMA_NO_NODE, GFP_KERNEL | __GFP_NOWARN | __GFP_ACCOUNT);
set_active_memcg(old_memcg);
mem_cgroup_put(memcg);
}
return !ret ? NULL : ret + LLIST_NODE_SZ;
}