linux/arch/arm/mach-omap2/iommu2.c

362 lines
8.3 KiB
C
Raw Normal View History

/*
* omap iommu: omap2/3 architecture specific functions
*
* Copyright (C) 2008-2009 Nokia Corporation
*
* Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
* Paul Mundt and Toshihiro Kobayashi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/module.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/stringify.h>
#include <plat/iommu.h>
/*
* omap2 architecture specific register bit definitions
*/
#define IOMMU_ARCH_VERSION 0x00000011
/* SYSCONF */
#define MMU_SYS_IDLE_SHIFT 3
#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT)
#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT)
#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
#define MMU_SYS_SOFTRESET (1 << 1)
#define MMU_SYS_AUTOIDLE 1
/* SYSSTATUS */
#define MMU_SYS_RESETDONE 1
/* IRQSTATUS & IRQENABLE */
#define MMU_IRQ_MULTIHITFAULT (1 << 4)
#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
#define MMU_IRQ_EMUMISS (1 << 2)
#define MMU_IRQ_TRANSLATIONFAULT (1 << 1)
#define MMU_IRQ_TLBMISS (1 << 0)
#define __MMU_IRQ_FAULT \
(MMU_IRQ_MULTIHITFAULT | MMU_IRQ_EMUMISS | MMU_IRQ_TRANSLATIONFAULT)
#define MMU_IRQ_MASK \
(__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_TLBMISS)
#define MMU_IRQ_TWL_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TABLEWALKFAULT)
#define MMU_IRQ_TLB_MISS_MASK (__MMU_IRQ_FAULT | MMU_IRQ_TLBMISS)
/* MMU_CNTL */
#define MMU_CNTL_SHIFT 1
#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
#define MMU_CNTL_EML_TLB (1 << 3)
#define MMU_CNTL_TWL_EN (1 << 2)
#define MMU_CNTL_MMU_EN (1 << 1)
#define get_cam_va_mask(pgsz) \
(((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \
((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \
((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
static void __iommu_set_twl(struct iommu *obj, bool on)
{
u32 l = iommu_read_reg(obj, MMU_CNTL);
if (on)
iommu_write_reg(obj, MMU_IRQ_TWL_MASK, MMU_IRQENABLE);
else
iommu_write_reg(obj, MMU_IRQ_TLB_MISS_MASK, MMU_IRQENABLE);
l &= ~MMU_CNTL_MASK;
if (on)
l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
else
l |= (MMU_CNTL_MMU_EN);
iommu_write_reg(obj, l, MMU_CNTL);
}
static int omap2_iommu_enable(struct iommu *obj)
{
u32 l, pa;
unsigned long timeout;
if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
return -EINVAL;
pa = virt_to_phys(obj->iopgd);
if (!IS_ALIGNED(pa, SZ_16K))
return -EINVAL;
iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
timeout = jiffies + msecs_to_jiffies(20);
do {
l = iommu_read_reg(obj, MMU_SYSSTATUS);
if (l & MMU_SYS_RESETDONE)
break;
} while (!time_after(jiffies, timeout));
if (!(l & MMU_SYS_RESETDONE)) {
dev_err(obj->dev, "can't take mmu out of reset\n");
return -ENODEV;
}
l = iommu_read_reg(obj, MMU_REVISION);
dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
(l >> 4) & 0xf, l & 0xf);
l = iommu_read_reg(obj, MMU_SYSCONFIG);
l &= ~MMU_SYS_IDLE_MASK;
l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
iommu_write_reg(obj, l, MMU_SYSCONFIG);
iommu_write_reg(obj, pa, MMU_TTB);
__iommu_set_twl(obj, true);
return 0;
}
static void omap2_iommu_disable(struct iommu *obj)
{
u32 l = iommu_read_reg(obj, MMU_CNTL);
l &= ~MMU_CNTL_MASK;
iommu_write_reg(obj, l, MMU_CNTL);
iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
}
static void omap2_iommu_set_twl(struct iommu *obj, bool on)
{
__iommu_set_twl(obj, false);
}
static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
{
int i;
u32 stat, da;
const char *err_msg[] = {
"tlb miss",
"translation fault",
"emulation miss",
"table walk fault",
"multi hit fault",
};
stat = iommu_read_reg(obj, MMU_IRQSTATUS);
stat &= MMU_IRQ_MASK;
if (!stat)
return 0;
da = iommu_read_reg(obj, MMU_FAULT_AD);
*ra = da;
dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
if (stat & (1 << i))
printk("%s ", err_msg[i]);
}
printk("\n");
iommu_write_reg(obj, stat, MMU_IRQSTATUS);
return stat;
}
static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
{
cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
}
static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
{
iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
iommu_write_reg(obj, cr->ram, MMU_RAM);
}
static u32 omap2_cr_to_virt(struct cr_regs *cr)
{
u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
u32 mask = get_cam_va_mask(cr->cam & page_size);
return cr->cam & mask;
}
static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
{
struct cr_regs *cr;
if (e->da & ~(get_cam_va_mask(e->pgsz))) {
dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
e->da);
return ERR_PTR(-EINVAL);
}
cr = kmalloc(sizeof(*cr), GFP_KERNEL);
if (!cr)
return ERR_PTR(-ENOMEM);
cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz | e->valid;
cr->ram = e->pa | e->endian | e->elsz | e->mixed;
return cr;
}
static inline int omap2_cr_valid(struct cr_regs *cr)
{
return cr->cam & MMU_CAM_V;
}
static u32 omap2_get_pte_attr(struct iotlb_entry *e)
{
u32 attr;
attr = e->mixed << 5;
attr |= e->endian;
attr |= e->elsz >> 3;
attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
return attr;
}
static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
{
char *p = buf;
/* FIXME: Need more detail analysis of cam/ram */
p += sprintf(p, "%08x %08x %01x\n", cr->cam, cr->ram,
(cr->cam & MMU_CAM_P) ? 1 : 0);
return p - buf;
}
#define pr_reg(name) \
do { \
ssize_t bytes; \
const char *str = "%20s: %08x\n"; \
const int maxcol = 32; \
bytes = snprintf(p, maxcol, str, __stringify(name), \
iommu_read_reg(obj, MMU_##name)); \
p += bytes; \
len -= bytes; \
if (len < maxcol) \
goto out; \
} while (0)
static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf, ssize_t len)
{
char *p = buf;
pr_reg(REVISION);
pr_reg(SYSCONFIG);
pr_reg(SYSSTATUS);
pr_reg(IRQSTATUS);
pr_reg(IRQENABLE);
pr_reg(WALKING_ST);
pr_reg(CNTL);
pr_reg(FAULT_AD);
pr_reg(TTB);
pr_reg(LOCK);
pr_reg(LD_TLB);
pr_reg(CAM);
pr_reg(RAM);
pr_reg(GFLUSH);
pr_reg(FLUSH_ENTRY);
pr_reg(READ_CAM);
pr_reg(READ_RAM);
pr_reg(EMU_FAULT_AD);
out:
return p - buf;
}
static void omap2_iommu_save_ctx(struct iommu *obj)
{
int i;
u32 *p = obj->ctx;
for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
p[i] = iommu_read_reg(obj, i * sizeof(u32));
dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
}
BUG_ON(p[0] != IOMMU_ARCH_VERSION);
}
static void omap2_iommu_restore_ctx(struct iommu *obj)
{
int i;
u32 *p = obj->ctx;
for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
iommu_write_reg(obj, p[i], i * sizeof(u32));
dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
}
BUG_ON(p[0] != IOMMU_ARCH_VERSION);
}
static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
{
e->da = cr->cam & MMU_CAM_VATAG_MASK;
e->pa = cr->ram & MMU_RAM_PADDR_MASK;
e->valid = cr->cam & MMU_CAM_V;
e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK;
e->endian = cr->ram & MMU_RAM_ENDIAN_MASK;
e->elsz = cr->ram & MMU_RAM_ELSZ_MASK;
e->mixed = cr->ram & MMU_RAM_MIXED;
}
static const struct iommu_functions omap2_iommu_ops = {
.version = IOMMU_ARCH_VERSION,
.enable = omap2_iommu_enable,
.disable = omap2_iommu_disable,
.set_twl = omap2_iommu_set_twl,
.fault_isr = omap2_iommu_fault_isr,
.tlb_read_cr = omap2_tlb_read_cr,
.tlb_load_cr = omap2_tlb_load_cr,
.cr_to_e = omap2_cr_to_e,
.cr_to_virt = omap2_cr_to_virt,
.alloc_cr = omap2_alloc_cr,
.cr_valid = omap2_cr_valid,
.dump_cr = omap2_dump_cr,
.get_pte_attr = omap2_get_pte_attr,
.save_ctx = omap2_iommu_save_ctx,
.restore_ctx = omap2_iommu_restore_ctx,
.dump_ctx = omap2_iommu_dump_ctx,
};
static int __init omap2_iommu_init(void)
{
return install_iommu_arch(&omap2_iommu_ops);
}
module_init(omap2_iommu_init);
static void __exit omap2_iommu_exit(void)
{
uninstall_iommu_arch(&omap2_iommu_ops);
}
module_exit(omap2_iommu_exit);
MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
MODULE_LICENSE("GPL v2");