2018-03-15 07:13:07 +08:00
|
|
|
/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
|
2005-04-17 06:20:36 +08:00
|
|
|
/******************************************************************************
|
|
|
|
*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
* Name: actbl.h - Basic ACPI Table Definitions
|
2005-04-17 06:20:36 +08:00
|
|
|
*
|
2023-04-05 21:38:21 +08:00
|
|
|
* Copyright (C) 2000 - 2023, Intel Corp.
|
2005-04-17 06:20:36 +08:00
|
|
|
*
|
2018-03-15 07:13:07 +08:00
|
|
|
*****************************************************************************/
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#ifndef __ACTBL_H__
|
|
|
|
#define __ACTBL_H__
|
|
|
|
|
2009-07-24 13:30:17 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* Fundamental ACPI tables
|
|
|
|
*
|
|
|
|
* This file contains definitions for the ACPI tables that are directly consumed
|
|
|
|
* by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
|
|
|
|
* device drivers and other OS support code.
|
|
|
|
*
|
|
|
|
* The RSDP and FACS do not use the common ACPI table header. All other ACPI
|
|
|
|
* tables use the header.
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2005-12-17 06:05:00 +08:00
|
|
|
/*
|
2009-07-27 10:53:00 +08:00
|
|
|
* Values for description table header signatures for tables defined in this
|
|
|
|
* file. Useful because they make it more difficult to inadvertently type in
|
|
|
|
* the wrong signature.
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
2007-02-03 00:48:18 +08:00
|
|
|
#define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
|
|
|
|
#define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
|
|
|
|
#define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
|
2015-07-01 14:44:23 +08:00
|
|
|
#define ACPI_SIG_OSDT "OSDT" /* Override System Description Table */
|
2007-02-03 00:48:18 +08:00
|
|
|
#define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
|
|
|
|
#define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
|
|
|
|
#define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
|
|
|
|
#define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
|
|
|
|
#define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
|
2007-02-03 00:48:19 +08:00
|
|
|
#define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
|
2018-12-14 04:30:32 +08:00
|
|
|
#define ACPI_OEM_NAME "OEM" /* Short name for OEM, not signature */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
/*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
* All tables and structures must be byte-packed to match the ACPI
|
|
|
|
* specification, since the tables are provided by the system BIOS
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
|
|
|
#pragma pack(1)
|
|
|
|
|
|
|
|
/*
|
2012-08-17 13:07:54 +08:00
|
|
|
* Note: C bitfields are not used for this reason:
|
|
|
|
*
|
|
|
|
* "Bitfields are great and easy to read, but unfortunately the C language
|
|
|
|
* does not specify the layout of bitfields in memory, which means they are
|
|
|
|
* essentially useless for dealing with packed data in on-disk formats or
|
|
|
|
* binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
|
|
|
|
* this decision was a design error in C. Ritchie could have picked an order
|
|
|
|
* and stuck with it." Norman Ramsey.
|
|
|
|
* See http://stackoverflow.com/a/1053662/41661
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
2009-07-24 13:30:17 +08:00
|
|
|
* Master ACPI Table Header. This common header is used by all ACPI tables
|
|
|
|
* except the RSDP and FACS.
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
*
|
|
|
|
******************************************************************************/
|
2005-04-17 06:20:36 +08:00
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
struct acpi_table_header {
|
2019-04-09 04:42:25 +08:00
|
|
|
char signature[ACPI_NAMESEG_SIZE]; /* ASCII table signature */
|
2007-02-03 00:48:18 +08:00
|
|
|
u32 length; /* Length of table in bytes, including this header */
|
2012-08-17 10:54:43 +08:00
|
|
|
u8 revision; /* ACPI Specification minor version number */
|
2007-02-03 00:48:18 +08:00
|
|
|
u8 checksum; /* To make sum of entire table == 0 */
|
|
|
|
char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */
|
|
|
|
char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
|
|
|
|
u32 oem_revision; /* OEM revision number */
|
2019-04-09 04:42:25 +08:00
|
|
|
char asl_compiler_id[ACPI_NAMESEG_SIZE]; /* ASCII ASL compiler vendor ID */
|
2007-02-03 00:48:18 +08:00
|
|
|
u32 asl_compiler_revision; /* ASL compiler version */
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2009-07-24 13:30:17 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
* GAS - Generic Address Structure (ACPI 2.0+)
|
2007-02-03 00:48:18 +08:00
|
|
|
*
|
|
|
|
* Note: Since this structure is used in the ACPI tables, it is byte aligned.
|
2012-08-17 10:54:43 +08:00
|
|
|
* If misaligned access is not supported by the hardware, accesses to the
|
2009-07-24 13:30:17 +08:00
|
|
|
* 64-bit Address field must be performed with care.
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
struct acpi_generic_address {
|
2007-02-03 00:48:18 +08:00
|
|
|
u8 space_id; /* Address space where struct or register exists */
|
|
|
|
u8 bit_width; /* Size in bits of given register */
|
|
|
|
u8 bit_offset; /* Bit offset within the register */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
u8 access_width; /* Minimum Access size (ACPI 3.0) */
|
|
|
|
u64 address; /* 64-bit address of struct or register */
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* RSDP - Root System Description Pointer (Signature is "RSD PTR ")
|
2009-07-27 10:53:00 +08:00
|
|
|
* Version 2
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-03 00:48:18 +08:00
|
|
|
struct acpi_table_rsdp {
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
char signature[8]; /* ACPI signature, contains "RSD PTR " */
|
|
|
|
u8 checksum; /* ACPI 1.0 checksum */
|
2007-02-03 00:48:18 +08:00
|
|
|
char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
|
|
|
|
u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
|
|
|
|
u32 length; /* Table length in bytes, including header (ACPI 2.0+) */
|
|
|
|
u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
|
|
|
|
u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */
|
|
|
|
u8 reserved[3]; /* Reserved, must be zero */
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2013-10-31 09:30:16 +08:00
|
|
|
/* Standalone struct for the ACPI 1.0 RSDP */
|
|
|
|
|
|
|
|
struct acpi_rsdp_common {
|
|
|
|
char signature[8];
|
|
|
|
u8 checksum;
|
|
|
|
char oem_id[ACPI_OEM_ID_SIZE];
|
|
|
|
u8 revision;
|
|
|
|
u32 rsdt_physical_address;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
|
|
|
|
|
|
|
|
struct acpi_rsdp_extension {
|
|
|
|
u32 length;
|
|
|
|
u64 xsdt_physical_address;
|
|
|
|
u8 extended_checksum;
|
|
|
|
u8 reserved[3];
|
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* RSDT/XSDT - Root System Description Tables
|
2009-07-27 10:53:00 +08:00
|
|
|
* Version 1 (both)
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
*
|
|
|
|
******************************************************************************/
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-02-03 00:48:18 +08:00
|
|
|
struct acpi_table_rsdt {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
};
|
|
|
|
|
2007-02-03 00:48:18 +08:00
|
|
|
struct acpi_table_xsdt {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
};
|
|
|
|
|
2014-01-08 13:43:34 +08:00
|
|
|
#define ACPI_RSDT_ENTRY_SIZE (sizeof (u32))
|
|
|
|
#define ACPI_XSDT_ENTRY_SIZE (sizeof (u64))
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* FACS - Firmware ACPI Control Structure (FACS)
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-03 00:48:18 +08:00
|
|
|
struct acpi_table_facs {
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
char signature[4]; /* ASCII table signature */
|
|
|
|
u32 length; /* Length of structure, in bytes */
|
|
|
|
u32 hardware_signature; /* Hardware configuration signature */
|
|
|
|
u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */
|
|
|
|
u32 global_lock; /* Global Lock for shared hardware resources */
|
2007-02-03 00:48:18 +08:00
|
|
|
u32 flags;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
|
|
|
|
u8 version; /* Version of this table (ACPI 2.0+) */
|
2009-06-24 13:42:00 +08:00
|
|
|
u8 reserved[3]; /* Reserved, must be zero */
|
|
|
|
u32 ospm_flags; /* Flags to be set by OSPM (ACPI 4.0) */
|
|
|
|
u8 reserved1[24]; /* Reserved, must be zero */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
};
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/* Masks for global_lock flag field above */
|
2009-06-24 13:42:00 +08:00
|
|
|
|
|
|
|
#define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */
|
|
|
|
#define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */
|
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/* Masks for Flags field above */
|
2007-02-03 00:48:18 +08:00
|
|
|
|
2009-06-24 13:42:00 +08:00
|
|
|
#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
|
|
|
|
#define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */
|
2007-02-03 00:48:18 +08:00
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/* Masks for ospm_flags field above */
|
2007-02-03 00:48:18 +08:00
|
|
|
|
2009-06-24 13:42:00 +08:00
|
|
|
#define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* FADT - Fixed ACPI Description Table (Signature "FACP")
|
2016-03-24 09:39:28 +08:00
|
|
|
* Version 6
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
/* Fields common to all versions of the FADT */
|
|
|
|
|
2007-02-03 00:48:18 +08:00
|
|
|
struct acpi_table_fadt {
|
2016-11-15 03:56:17 +08:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 facs; /* 32-bit physical address of FACS */
|
|
|
|
u32 dsdt; /* 32-bit physical address of DSDT */
|
|
|
|
u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
|
|
|
|
u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */
|
|
|
|
u16 sci_interrupt; /* System vector of SCI interrupt */
|
|
|
|
u32 smi_command; /* 32-bit Port address of SMI command port */
|
|
|
|
u8 acpi_enable; /* Value to write to SMI_CMD to enable ACPI */
|
|
|
|
u8 acpi_disable; /* Value to write to SMI_CMD to disable ACPI */
|
|
|
|
u8 s4_bios_request; /* Value to write to SMI_CMD to enter S4BIOS state */
|
|
|
|
u8 pstate_control; /* Processor performance state control */
|
|
|
|
u32 pm1a_event_block; /* 32-bit port address of Power Mgt 1a Event Reg Blk */
|
|
|
|
u32 pm1b_event_block; /* 32-bit port address of Power Mgt 1b Event Reg Blk */
|
|
|
|
u32 pm1a_control_block; /* 32-bit port address of Power Mgt 1a Control Reg Blk */
|
|
|
|
u32 pm1b_control_block; /* 32-bit port address of Power Mgt 1b Control Reg Blk */
|
|
|
|
u32 pm2_control_block; /* 32-bit port address of Power Mgt 2 Control Reg Blk */
|
|
|
|
u32 pm_timer_block; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
|
|
|
|
u32 gpe0_block; /* 32-bit port address of General Purpose Event 0 Reg Blk */
|
|
|
|
u32 gpe1_block; /* 32-bit port address of General Purpose Event 1 Reg Blk */
|
|
|
|
u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */
|
|
|
|
u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */
|
|
|
|
u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */
|
|
|
|
u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */
|
|
|
|
u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */
|
|
|
|
u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
|
|
|
|
u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
|
|
|
|
u8 cst_control; /* Support for the _CST object and C-States change notification */
|
|
|
|
u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */
|
|
|
|
u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */
|
|
|
|
u16 flush_size; /* Processor memory cache line width, in bytes */
|
|
|
|
u16 flush_stride; /* Number of flush strides that need to be read */
|
|
|
|
u8 duty_offset; /* Processor duty cycle index in processor P_CNT reg */
|
|
|
|
u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */
|
|
|
|
u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */
|
|
|
|
u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */
|
|
|
|
u8 century; /* Index to century in RTC CMOS RAM */
|
|
|
|
u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */
|
|
|
|
u8 reserved; /* Reserved, must be zero */
|
|
|
|
u32 flags; /* Miscellaneous flag bits (see below for individual flags) */
|
|
|
|
struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */
|
|
|
|
u8 reset_value; /* Value to write to the reset_register port to reset the system */
|
|
|
|
u16 arm_boot_flags; /* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */
|
|
|
|
u8 minor_revision; /* FADT Minor Revision (ACPI 5.1) */
|
|
|
|
u64 Xfacs; /* 64-bit physical address of FACS */
|
|
|
|
u64 Xdsdt; /* 64-bit physical address of DSDT */
|
|
|
|
struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
|
|
|
|
struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
|
|
|
|
struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
|
|
|
|
struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
|
|
|
|
struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
|
|
|
|
struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
|
|
|
|
struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
|
|
|
|
struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
|
|
|
|
struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register (ACPI 5.0) */
|
|
|
|
struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register (ACPI 5.0) */
|
|
|
|
u64 hypervisor_id; /* Hypervisor Vendor ID (ACPI 6.0) */
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
2014-07-30 12:21:43 +08:00
|
|
|
/* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
|
2009-02-03 15:14:33 +08:00
|
|
|
|
|
|
|
#define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
|
|
|
|
#define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
|
|
|
|
#define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */
|
|
|
|
#define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
|
|
|
|
#define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */
|
2011-11-16 10:42:09 +08:00
|
|
|
#define ACPI_FADT_NO_CMOS_RTC (1<<5) /* 05: [V5] No CMOS real-time clock present */
|
2009-02-03 15:14:33 +08:00
|
|
|
|
|
|
|
#define FADT2_REVISION_ID 3
|
|
|
|
|
2014-07-30 12:21:43 +08:00
|
|
|
/* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */
|
|
|
|
|
2016-11-15 03:56:17 +08:00
|
|
|
#define ACPI_FADT_PSCI_COMPLIANT (1) /* 00: [V5+] PSCI 0.2+ is implemented */
|
|
|
|
#define ACPI_FADT_PSCI_USE_HVC (1<<1) /* 01: [V5+] HVC must be used instead of SMC as the PSCI conduit */
|
2014-07-30 12:21:43 +08:00
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/* Masks for FADT flags */
|
2007-02-03 00:48:18 +08:00
|
|
|
|
2012-08-17 10:54:43 +08:00
|
|
|
#define ACPI_FADT_WBINVD (1) /* 00: [V1] The WBINVD instruction works properly */
|
|
|
|
#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] WBINVD flushes but does not invalidate caches */
|
2009-02-03 15:14:33 +08:00
|
|
|
#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
|
|
|
|
#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
|
|
|
|
#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
|
|
|
|
#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
|
2012-08-17 10:54:43 +08:00
|
|
|
#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status is not in fixed register space */
|
2009-02-03 15:14:33 +08:00
|
|
|
#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
|
|
|
|
#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
|
|
|
|
#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
|
|
|
|
#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */
|
|
|
|
#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
|
|
|
|
#define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */
|
|
|
|
#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */
|
|
|
|
#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
|
|
|
|
#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
|
|
|
|
#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
|
|
|
|
#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
|
|
|
|
#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
|
2012-07-12 09:40:10 +08:00
|
|
|
#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
|
2011-11-16 10:42:09 +08:00
|
|
|
#define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
|
|
|
|
#define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
|
2009-02-03 15:14:33 +08:00
|
|
|
|
2011-03-31 09:57:33 +08:00
|
|
|
/* Values for preferred_profile (Preferred Power Management Profiles) */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2012-08-17 10:54:43 +08:00
|
|
|
enum acpi_preferred_pm_profiles {
|
2007-02-03 00:48:18 +08:00
|
|
|
PM_UNSPECIFIED = 0,
|
|
|
|
PM_DESKTOP = 1,
|
|
|
|
PM_MOBILE = 2,
|
|
|
|
PM_WORKSTATION = 3,
|
|
|
|
PM_ENTERPRISE_SERVER = 4,
|
|
|
|
PM_SOHO_SERVER = 5,
|
2011-11-16 10:42:09 +08:00
|
|
|
PM_APPLIANCE_PC = 6,
|
|
|
|
PM_PERFORMANCE_SERVER = 7,
|
2023-06-21 01:24:31 +08:00
|
|
|
PM_TABLET = 8,
|
|
|
|
NR_PM_PROFILES = 9
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
2015-05-21 10:30:52 +08:00
|
|
|
/* Values for sleep_status and sleep_control registers (V5+ FADT) */
|
2012-02-14 15:00:53 +08:00
|
|
|
|
|
|
|
#define ACPI_X_WAKE_STATUS 0x80
|
|
|
|
#define ACPI_X_SLEEP_TYPE_MASK 0x1C
|
|
|
|
#define ACPI_X_SLEEP_TYPE_POSITION 0x02
|
|
|
|
#define ACPI_X_SLEEP_ENABLE 0x20
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
|
|
|
/* Reset to default packing */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
#pragma pack()
|
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/*
|
|
|
|
* Internal table-related structures
|
|
|
|
*/
|
2008-12-31 03:01:23 +08:00
|
|
|
union acpi_name_union {
|
|
|
|
u32 integer;
|
|
|
|
char ascii[4];
|
|
|
|
};
|
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/* Internal ACPI Table Descriptor. One per ACPI table. */
|
|
|
|
|
2008-12-31 03:01:23 +08:00
|
|
|
struct acpi_table_desc {
|
|
|
|
acpi_physical_address address;
|
|
|
|
struct acpi_table_header *pointer;
|
2012-08-17 10:54:43 +08:00
|
|
|
u32 length; /* Length fixed at 32 bits (fixed in table header) */
|
2008-12-31 03:01:23 +08:00
|
|
|
union acpi_name_union signature;
|
|
|
|
acpi_owner_id owner_id;
|
|
|
|
u8 flags;
|
ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel
ACPICA commit cac6790954d4d752a083e6122220b8a22febcd07
This patch back ports Linux acpi_get_table_with_size() and
early_acpi_os_unmap_memory() into ACPICA upstream to reduce divergences.
The 2 APIs are used by Linux as table management APIs for long time, it
contains a hidden logic that during the early stage, the mapped tables
should be unmapped before the early stage ends.
During the early stage, tables are handled by the following sequence:
acpi_get_table_with_size();
parse the table
early_acpi_os_unmap_memory();
During the late stage, tables are handled by the following sequence:
acpi_get_table();
parse the table
Linux uses acpi_gbl_permanent_mmap to distinguish the early stage and the
late stage.
The reasoning of introducing acpi_get_table_with_size() is: ACPICA will
remember the early mapped pointer in acpi_get_table() and Linux isn't able to
prevent ACPICA from using the wrong early mapped pointer during the late
stage as there is no API provided from ACPICA to be an inverse of
acpi_get_table() to forget the early mapped pointer.
But how ACPICA can work with the early/late stage requirement? Inside of
ACPICA, tables are ensured to be remained in "INSTALLED" state during the
early stage, and they are carefully not transitioned to "VALIDATED" state
until the late stage. So the same logic is in fact implemented inside of
ACPICA in a different way. The gap is only that the feature is not provided
to the OSPMs in an accessible external API style.
It then is possible to fix the gap by providing an inverse of
acpi_get_table() from ACPICA, so that the two Linux sequences can be
combined:
acpi_get_table();
parse the table
acpi_put_table();
In order to work easier with the current Linux code, acpi_get_table() and
acpi_put_table() is implemented in a usage counting based style:
1. When the usage count of the table is increased from 0 to 1, table is
mapped and .Pointer is set with the mapping address (VALIDATED);
2. When the usage count of the table is decreased from 1 to 0, .Pointer
is unset and the mapping address is unmapped (INVALIDATED).
So that we can deploy the new APIs to Linux with minimal effort by just
invoking acpi_get_table() in acpi_get_table_with_size() and invoking
acpi_put_table() in early_acpi_os_unmap_memory(). Lv Zheng.
Link: https://github.com/acpica/acpica/commit/cac67909
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-14 15:04:25 +08:00
|
|
|
u16 validation_count;
|
2008-12-31 03:01:23 +08:00
|
|
|
};
|
|
|
|
|
2017-06-07 12:54:58 +08:00
|
|
|
/*
|
|
|
|
* Maximum value of the validation_count field in struct acpi_table_desc.
|
|
|
|
* When reached, validation_count cannot be changed any more and the table will
|
|
|
|
* be permanently regarded as validated.
|
|
|
|
*
|
|
|
|
* This is to prevent situations in which unbalanced table get/put operations
|
|
|
|
* may cause premature table unmapping in the OS to happen.
|
|
|
|
*
|
|
|
|
* The maximum validation count can be defined to any value, but should be
|
|
|
|
* greater than the maximum number of OS early stage mapping slots to avoid
|
|
|
|
* leaking early stage table mappings to the late stage.
|
|
|
|
*/
|
|
|
|
#define ACPI_MAX_TABLE_VALIDATIONS ACPI_UINT16_MAX
|
|
|
|
|
2009-07-27 10:53:00 +08:00
|
|
|
/* Masks for Flags field above */
|
2008-12-31 03:01:23 +08:00
|
|
|
|
2014-04-04 12:39:26 +08:00
|
|
|
#define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL (0) /* Virtual address, external maintained */
|
|
|
|
#define ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL (1) /* Physical address, internally mapped */
|
|
|
|
#define ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL (2) /* Virtual address, internallly allocated */
|
2014-04-04 12:39:04 +08:00
|
|
|
#define ACPI_TABLE_ORIGIN_MASK (3)
|
2017-07-10 15:23:56 +08:00
|
|
|
#define ACPI_TABLE_IS_VERIFIED (4)
|
2014-04-04 12:39:04 +08:00
|
|
|
#define ACPI_TABLE_IS_LOADED (8)
|
2008-12-31 03:01:23 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
/*
|
2007-02-03 00:48:18 +08:00
|
|
|
* Get the remaining ACPI tables
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
2007-02-03 00:48:18 +08:00
|
|
|
#include <acpi/actbl1.h>
|
2009-07-24 13:30:17 +08:00
|
|
|
#include <acpi/actbl2.h>
|
2011-11-16 11:04:00 +08:00
|
|
|
#include <acpi/actbl3.h>
|
2007-02-03 00:48:22 +08:00
|
|
|
|
2012-12-20 09:07:26 +08:00
|
|
|
/* Macros used to generate offsets to specific table fields */
|
|
|
|
|
|
|
|
#define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f)
|
|
|
|
|
2011-02-14 15:50:42 +08:00
|
|
|
/*
|
|
|
|
* Sizes of the various flavors of FADT. We need to look closely
|
|
|
|
* at the FADT length because the version number essentially tells
|
|
|
|
* us nothing because of many BIOS bugs where the version does not
|
|
|
|
* match the expected length. In other words, the length of the
|
|
|
|
* FADT is the bottom line as to what the version really is.
|
|
|
|
*
|
2016-11-15 03:56:17 +08:00
|
|
|
* For reference, the values below are as follows:
|
|
|
|
* FADT V1 size: 0x074
|
|
|
|
* FADT V2 size: 0x084
|
|
|
|
* FADT V3 size: 0x0F4
|
|
|
|
* FADT V4 size: 0x0F4
|
|
|
|
* FADT V5 size: 0x10C
|
|
|
|
* FADT V6 size: 0x114
|
2011-02-14 15:50:42 +08:00
|
|
|
*/
|
2016-11-15 03:56:17 +08:00
|
|
|
#define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4)
|
|
|
|
#define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (minor_revision) + 1)
|
|
|
|
#define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control))
|
|
|
|
#define ACPI_FADT_V5_SIZE (u32) (ACPI_FADT_OFFSET (hypervisor_id))
|
|
|
|
#define ACPI_FADT_V6_SIZE (u32) (sizeof (struct acpi_table_fadt))
|
2011-02-14 15:50:42 +08:00
|
|
|
|
2016-03-24 09:39:28 +08:00
|
|
|
#define ACPI_FADT_CONFORMANCE "ACPI 6.1 (FADT version 6)"
|
|
|
|
|
2005-08-05 12:44:28 +08:00
|
|
|
#endif /* __ACTBL_H__ */
|