linux/include/acpi/acstruct.h

210 lines
7.0 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: acstruct.h - Internal structs
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACSTRUCT_H__
#define __ACSTRUCT_H__
/*****************************************************************************
*
* Tree walking typedefs and structs
*
****************************************************************************/
/*
* Walk state - current state of a parse tree walk. Used for both a leisurely stroll through
* the tree (for whatever reason), and for control method execution.
*/
#define ACPI_NEXT_OP_DOWNWARD 1
#define ACPI_NEXT_OP_UPWARD 2
#define ACPI_WALK_NON_METHOD 0
#define ACPI_WALK_METHOD 1
#define ACPI_WALK_METHOD_RESTART 2
#define ACPI_WALK_CONST_REQUIRED 3
#define ACPI_WALK_CONST_OPTIONAL 4
struct acpi_walk_state {
u8 data_type; /* To differentiate various internal objs MUST BE FIRST! */
u8 walk_type;
acpi_owner_id owner_id; /* Owner of objects created during the walk */
u8 last_predicate; /* Result of last predicate */
u8 current_result; /* */
u8 next_op_info; /* Info about next_op */
u8 num_operands; /* Stack pointer for Operands[] array */
u8 return_used;
u16 opcode; /* Current AML opcode */
u8 scope_depth;
u8 pass_number; /* Parse pass during table load */
u32 arg_count; /* push for fixed or var args */
u32 aml_offset;
u32 arg_types;
u32 method_breakpoint; /* For single stepping */
u32 user_breakpoint; /* User AML breakpoint */
u32 parse_flags;
u32 prev_arg_types;
u8 *aml_last_while;
struct acpi_namespace_node arguments[ACPI_METHOD_NUM_ARGS]; /* Control method arguments */
union acpi_operand_object **caller_return_desc;
union acpi_generic_state *control_state; /* List of control states (nested IFs) */
struct acpi_namespace_node *deferred_node; /* Used when executing deferred opcodes */
struct acpi_gpe_event_info *gpe_event_info; /* Info for GPE (_Lxx/_Exx methods only */
union acpi_operand_object *implicit_return_obj;
struct acpi_namespace_node local_variables[ACPI_METHOD_NUM_LOCALS]; /* Control method locals */
struct acpi_namespace_node *method_call_node; /* Called method Node */
union acpi_parse_object *method_call_op; /* method_call Op if running a method */
union acpi_operand_object *method_desc; /* Method descriptor if running a method */
struct acpi_namespace_node *method_node; /* Method node if running a method. */
union acpi_parse_object *op; /* Current parser op */
union acpi_operand_object *operands[ACPI_OBJ_NUM_OPERANDS + 1]; /* Operands passed to the interpreter (+1 for NULL terminator) */
const struct acpi_opcode_info *op_info; /* Info on current opcode */
union acpi_parse_object *origin; /* Start of walk [Obsolete] */
union acpi_operand_object **params;
struct acpi_parse_state parser_state; /* Current state of parser */
union acpi_operand_object *result_obj;
union acpi_generic_state *results; /* Stack of accumulated results */
union acpi_operand_object *return_desc; /* Return object, if any */
union acpi_generic_state *scope_info; /* Stack of nested scopes */
union acpi_parse_object *prev_op; /* Last op that was processed */
union acpi_parse_object *next_op; /* next op to be processed */
acpi_parse_downwards descending_callback;
acpi_parse_upwards ascending_callback;
struct acpi_thread_state *thread;
struct acpi_walk_state *next; /* Next walk_state in list */
};
/* Info used by acpi_ps_init_objects */
struct acpi_init_walk_info {
u16 method_count;
u16 device_count;
u16 op_region_count;
u16 field_count;
u16 buffer_count;
u16 package_count;
u16 op_region_init;
u16 field_init;
u16 buffer_init;
u16 package_init;
u16 object_count;
struct acpi_table_desc *table_desc;
};
/* Info used by acpi_ns_initialize_devices */
struct acpi_device_walk_info {
u16 device_count;
u16 num_STA;
u16 num_INI;
struct acpi_table_desc *table_desc;
};
/* TBD: [Restructure] Merge with struct above */
struct acpi_walk_info {
u32 debug_level;
u32 count;
acpi_owner_id owner_id;
u8 display_type;
};
/* Display Types */
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 12:00:00 +08:00
#define ACPI_DISPLAY_SUMMARY (u8) 0
#define ACPI_DISPLAY_OBJECTS (u8) 1
#define ACPI_DISPLAY_MASK (u8) 1
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-24 12:00:00 +08:00
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 12:00:00 +08:00
#define ACPI_DISPLAY_SHORT (u8) 2
struct acpi_get_devices_info {
acpi_walk_callback user_function;
void *context;
char *hid;
};
union acpi_aml_operands {
union acpi_operand_object *operands[7];
struct {
struct acpi_object_integer *type;
struct acpi_object_integer *code;
struct acpi_object_integer *argument;
} fatal;
struct {
union acpi_operand_object *source;
struct acpi_object_integer *index;
union acpi_operand_object *target;
} index;
struct {
union acpi_operand_object *source;
struct acpi_object_integer *index;
struct acpi_object_integer *length;
union acpi_operand_object *target;
} mid;
};
/* Internal method parameter list */
struct acpi_parameter_info {
struct acpi_namespace_node *node;
union acpi_operand_object *obj_desc;
union acpi_operand_object **parameters;
union acpi_operand_object *return_object;
u8 pass_number;
u8 parameter_type;
u8 return_object_type;
};
/* Types for parameter_type above */
#define ACPI_PARAM_ARGS 0
#define ACPI_PARAM_GPE 1
#endif