2018-08-08 00:18:25 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
//
|
|
|
|
// max77686.c - Regulator driver for the Maxim 77686
|
|
|
|
//
|
|
|
|
// Copyright (C) 2012 Samsung Electronics
|
|
|
|
// Chiwoong Byun <woong.byun@samsung.com>
|
|
|
|
// Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
|
|
//
|
|
|
|
// This driver is based on max8997.c
|
2012-06-01 12:17:14 +08:00
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/bug.h>
|
|
|
|
#include <linux/err.h>
|
2018-11-15 16:01:19 +08:00
|
|
|
#include <linux/gpio/consumer.h>
|
2012-06-01 12:17:14 +08:00
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
2012-07-05 11:58:25 +08:00
|
|
|
#include <linux/regulator/of_regulator.h>
|
2012-06-01 12:17:14 +08:00
|
|
|
#include <linux/mfd/max77686.h>
|
|
|
|
#include <linux/mfd/max77686-private.h>
|
|
|
|
|
|
|
|
#define MAX77686_LDO_MINUV 800000
|
|
|
|
#define MAX77686_LDO_UVSTEP 50000
|
|
|
|
#define MAX77686_LDO_LOW_MINUV 800000
|
|
|
|
#define MAX77686_LDO_LOW_UVSTEP 25000
|
|
|
|
#define MAX77686_BUCK_MINUV 750000
|
|
|
|
#define MAX77686_BUCK_UVSTEP 50000
|
2016-04-29 18:59:51 +08:00
|
|
|
#define MAX77686_BUCK_ENABLE_TIME 40 /* us */
|
|
|
|
#define MAX77686_DVS_ENABLE_TIME 22 /* us */
|
2012-06-19 15:53:42 +08:00
|
|
|
#define MAX77686_RAMP_DELAY 100000 /* uV/us */
|
|
|
|
#define MAX77686_DVS_RAMP_DELAY 27500 /* uV/us */
|
2012-06-01 12:17:14 +08:00
|
|
|
#define MAX77686_DVS_MINUV 600000
|
|
|
|
#define MAX77686_DVS_UVSTEP 12500
|
|
|
|
|
2015-01-05 19:48:43 +08:00
|
|
|
/*
|
|
|
|
* Value for configuring buck[89] and LDO{20,21,22} as GPIO control.
|
|
|
|
* It is the same as 'off' for other regulators.
|
|
|
|
*/
|
|
|
|
#define MAX77686_GPIO_CONTROL 0x0
|
2014-10-27 20:11:47 +08:00
|
|
|
/*
|
|
|
|
* Values used for configuring LDOs and bucks.
|
|
|
|
* Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
|
|
|
|
*/
|
|
|
|
#define MAX77686_LDO_LOWPOWER 0x1
|
|
|
|
/*
|
|
|
|
* On/off controlled by PWRREQ:
|
|
|
|
* - LDO2, 6-8, 10-12, 14-16
|
|
|
|
* - buck[1234]
|
|
|
|
*/
|
|
|
|
#define MAX77686_OFF_PWRREQ 0x1
|
|
|
|
/* Low power mode controlled by PWRREQ: All LDOs */
|
|
|
|
#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
|
|
|
|
/* Forcing low power mode: buck[234] */
|
|
|
|
#define MAX77686_BUCK_LOWPOWER 0x2
|
|
|
|
#define MAX77686_NORMAL 0x3
|
|
|
|
|
2012-06-01 12:17:14 +08:00
|
|
|
#define MAX77686_OPMODE_SHIFT 6
|
|
|
|
#define MAX77686_OPMODE_BUCK234_SHIFT 4
|
|
|
|
#define MAX77686_OPMODE_MASK 0x3
|
|
|
|
|
|
|
|
#define MAX77686_VSEL_MASK 0x3F
|
|
|
|
#define MAX77686_DVS_VSEL_MASK 0xFF
|
|
|
|
|
|
|
|
#define MAX77686_RAMP_RATE_MASK 0xC0
|
|
|
|
|
|
|
|
#define MAX77686_REGULATORS MAX77686_REG_MAX
|
|
|
|
#define MAX77686_LDOS 26
|
|
|
|
|
|
|
|
struct max77686_data {
|
2018-11-15 16:01:19 +08:00
|
|
|
struct device *dev;
|
2015-05-19 01:01:03 +08:00
|
|
|
DECLARE_BITMAP(gpio_enabled, MAX77686_REGULATORS);
|
2015-01-05 19:48:43 +08:00
|
|
|
|
2014-11-04 16:49:41 +08:00
|
|
|
/* Array indexed by regulator id */
|
2012-10-16 19:54:18 +08:00
|
|
|
unsigned int opmode[MAX77686_REGULATORS];
|
2012-06-01 12:17:14 +08:00
|
|
|
};
|
|
|
|
|
2014-10-27 20:11:48 +08:00
|
|
|
static unsigned int max77686_get_opmode_shift(int id)
|
|
|
|
{
|
|
|
|
switch (id) {
|
|
|
|
case MAX77686_BUCK1:
|
|
|
|
case MAX77686_BUCK5 ... MAX77686_BUCK9:
|
|
|
|
return 0;
|
|
|
|
case MAX77686_BUCK2 ... MAX77686_BUCK4:
|
|
|
|
return MAX77686_OPMODE_BUCK234_SHIFT;
|
|
|
|
default:
|
|
|
|
/* all LDOs */
|
|
|
|
return MAX77686_OPMODE_SHIFT;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-01-05 19:48:43 +08:00
|
|
|
/*
|
|
|
|
* When regulator is configured for GPIO control then it
|
|
|
|
* replaces "normal" mode. Any change from low power mode to normal
|
|
|
|
* should actually change to GPIO control.
|
|
|
|
* Map normal mode to proper value for such regulators.
|
|
|
|
*/
|
|
|
|
static unsigned int max77686_map_normal_mode(struct max77686_data *max77686,
|
|
|
|
int id)
|
|
|
|
{
|
|
|
|
switch (id) {
|
|
|
|
case MAX77686_BUCK8:
|
|
|
|
case MAX77686_BUCK9:
|
|
|
|
case MAX77686_LDO20 ... MAX77686_LDO22:
|
2015-05-19 01:01:03 +08:00
|
|
|
if (test_bit(id, max77686->gpio_enabled))
|
2015-01-05 19:48:43 +08:00
|
|
|
return MAX77686_GPIO_CONTROL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return MAX77686_NORMAL;
|
|
|
|
}
|
|
|
|
|
regulator: max77686: Add suspend disable for some LDOs
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 19:14:52 +08:00
|
|
|
/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
|
|
|
|
static int max77686_set_suspend_disable(struct regulator_dev *rdev)
|
2012-10-16 19:54:19 +08:00
|
|
|
{
|
2014-10-27 20:11:48 +08:00
|
|
|
unsigned int val, shift;
|
2012-10-16 19:54:19 +08:00
|
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
2013-04-27 16:18:16 +08:00
|
|
|
int ret, id = rdev_get_id(rdev);
|
2012-10-16 19:54:19 +08:00
|
|
|
|
2014-10-27 20:11:48 +08:00
|
|
|
shift = max77686_get_opmode_shift(id);
|
|
|
|
val = MAX77686_OFF_PWRREQ;
|
2012-10-16 19:54:19 +08:00
|
|
|
|
2013-04-27 16:18:16 +08:00
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
2014-10-27 20:11:48 +08:00
|
|
|
rdev->desc->enable_mask, val << shift);
|
2013-04-27 16:18:16 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2013-02-14 03:52:26 +08:00
|
|
|
max77686->opmode[id] = val;
|
2013-04-27 16:18:16 +08:00
|
|
|
return 0;
|
2012-10-16 19:54:19 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Some LDOs supports [LPM/Normal]ON mode during suspend state */
|
|
|
|
static int max77686_set_suspend_mode(struct regulator_dev *rdev,
|
|
|
|
unsigned int mode)
|
|
|
|
{
|
|
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
|
|
|
unsigned int val;
|
2013-04-27 16:18:16 +08:00
|
|
|
int ret, id = rdev_get_id(rdev);
|
2012-10-16 19:54:19 +08:00
|
|
|
|
|
|
|
/* BUCK[5-9] doesn't support this feature */
|
2013-02-14 03:52:26 +08:00
|
|
|
if (id >= MAX77686_BUCK5)
|
2012-10-16 19:54:19 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
|
2014-10-27 20:11:48 +08:00
|
|
|
val = MAX77686_LDO_LOWPOWER_PWRREQ;
|
2012-10-16 19:54:19 +08:00
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
|
2015-01-05 19:48:43 +08:00
|
|
|
val = max77686_map_normal_mode(max77686, id);
|
2012-10-16 19:54:19 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
|
|
|
|
rdev->desc->name, mode);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2013-04-27 16:18:16 +08:00
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
2014-10-27 20:11:48 +08:00
|
|
|
rdev->desc->enable_mask,
|
|
|
|
val << MAX77686_OPMODE_SHIFT);
|
2013-04-27 16:18:16 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2013-02-14 03:52:26 +08:00
|
|
|
max77686->opmode[id] = val;
|
2013-04-27 16:18:16 +08:00
|
|
|
return 0;
|
2012-10-16 19:54:19 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
|
|
|
|
static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
|
|
|
|
unsigned int mode)
|
|
|
|
{
|
|
|
|
unsigned int val;
|
|
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
2015-01-05 19:48:43 +08:00
|
|
|
int ret, id = rdev_get_id(rdev);
|
2012-10-16 19:54:19 +08:00
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_STANDBY: /* switch off */
|
2014-10-27 20:11:48 +08:00
|
|
|
val = MAX77686_OFF_PWRREQ;
|
2012-10-16 19:54:19 +08:00
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
|
2014-10-27 20:11:48 +08:00
|
|
|
val = MAX77686_LDO_LOWPOWER_PWRREQ;
|
2012-10-16 19:54:19 +08:00
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
|
2015-01-05 19:48:43 +08:00
|
|
|
val = max77686_map_normal_mode(max77686, id);
|
2012-10-16 19:54:19 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
|
|
|
|
rdev->desc->name, mode);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2013-04-27 16:18:16 +08:00
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
2014-10-27 20:11:48 +08:00
|
|
|
rdev->desc->enable_mask,
|
|
|
|
val << MAX77686_OPMODE_SHIFT);
|
2013-04-27 16:18:16 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2015-01-05 19:48:43 +08:00
|
|
|
max77686->opmode[id] = val;
|
2013-04-27 16:18:16 +08:00
|
|
|
return 0;
|
2012-10-16 19:54:19 +08:00
|
|
|
}
|
|
|
|
|
2012-10-22 12:09:28 +08:00
|
|
|
static int max77686_enable(struct regulator_dev *rdev)
|
2012-10-16 19:54:18 +08:00
|
|
|
{
|
|
|
|
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
|
2014-10-27 20:11:48 +08:00
|
|
|
unsigned int shift;
|
|
|
|
int id = rdev_get_id(rdev);
|
|
|
|
|
|
|
|
shift = max77686_get_opmode_shift(id);
|
2012-10-16 19:54:18 +08:00
|
|
|
|
regulator: max77686: Add suspend disable for some LDOs
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 19:14:52 +08:00
|
|
|
if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
|
2015-01-05 19:48:43 +08:00
|
|
|
max77686->opmode[id] = max77686_map_normal_mode(max77686, id);
|
regulator: max77686: Add suspend disable for some LDOs
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 19:14:52 +08:00
|
|
|
|
2012-10-16 19:54:18 +08:00
|
|
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
|
|
rdev->desc->enable_mask,
|
2014-10-27 20:11:48 +08:00
|
|
|
max77686->opmode[id] << shift);
|
2012-10-16 19:54:18 +08:00
|
|
|
}
|
|
|
|
|
2015-01-05 19:48:43 +08:00
|
|
|
static int max77686_of_parse_cb(struct device_node *np,
|
|
|
|
const struct regulator_desc *desc,
|
|
|
|
struct regulator_config *config)
|
|
|
|
{
|
|
|
|
struct max77686_data *max77686 = config->driver_data;
|
2018-12-06 20:43:43 +08:00
|
|
|
int ret;
|
2015-01-05 19:48:43 +08:00
|
|
|
|
|
|
|
switch (desc->id) {
|
|
|
|
case MAX77686_BUCK8:
|
|
|
|
case MAX77686_BUCK9:
|
|
|
|
case MAX77686_LDO20 ... MAX77686_LDO22:
|
2019-10-05 07:10:17 +08:00
|
|
|
config->ena_gpiod = fwnode_gpiod_get_index(
|
|
|
|
of_fwnode_handle(np),
|
|
|
|
"maxim,ena",
|
2018-11-15 16:01:19 +08:00
|
|
|
0,
|
|
|
|
GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
|
|
|
|
"max77686-regulator");
|
|
|
|
if (IS_ERR(config->ena_gpiod))
|
|
|
|
config->ena_gpiod = NULL;
|
2015-01-05 19:48:43 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-11-15 16:01:19 +08:00
|
|
|
if (config->ena_gpiod) {
|
2015-05-19 01:01:03 +08:00
|
|
|
set_bit(desc->id, max77686->gpio_enabled);
|
2015-01-05 19:48:43 +08:00
|
|
|
|
2018-12-06 20:43:43 +08:00
|
|
|
ret = regmap_update_bits(config->regmap, desc->enable_reg,
|
|
|
|
desc->enable_mask,
|
|
|
|
MAX77686_GPIO_CONTROL);
|
|
|
|
if (ret) {
|
|
|
|
gpiod_put(config->ena_gpiod);
|
|
|
|
config->ena_gpiod = NULL;
|
|
|
|
}
|
2015-01-05 19:48:43 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2021-06-05 09:34:24 +08:00
|
|
|
static const unsigned int max77686_buck_dvs_ramp_table[] = {
|
|
|
|
13750, 27500, 55000, 100000
|
|
|
|
};
|
|
|
|
|
2017-01-28 22:22:24 +08:00
|
|
|
static const struct regulator_ops max77686_ops = {
|
2012-06-01 12:17:14 +08:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
2012-06-03 22:46:14 +08:00
|
|
|
.map_voltage = regulator_map_voltage_linear,
|
2012-06-01 12:17:14 +08:00
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
2012-10-16 19:54:18 +08:00
|
|
|
.enable = max77686_enable,
|
2012-06-01 12:17:14 +08:00
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
2012-06-19 15:53:42 +08:00
|
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
2012-10-16 19:54:19 +08:00
|
|
|
.set_suspend_mode = max77686_set_suspend_mode,
|
|
|
|
};
|
|
|
|
|
2017-01-28 22:22:24 +08:00
|
|
|
static const struct regulator_ops max77686_ldo_ops = {
|
2012-10-16 19:54:19 +08:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.enable = max77686_enable,
|
2012-06-01 12:17:14 +08:00
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
2012-06-19 15:53:42 +08:00
|
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
2012-10-16 19:54:19 +08:00
|
|
|
.set_suspend_mode = max77686_ldo_set_suspend_mode,
|
regulator: max77686: Add suspend disable for some LDOs
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 19:14:52 +08:00
|
|
|
.set_suspend_disable = max77686_set_suspend_disable,
|
2012-10-16 19:54:19 +08:00
|
|
|
};
|
|
|
|
|
2017-01-28 22:22:24 +08:00
|
|
|
static const struct regulator_ops max77686_buck1_ops = {
|
2012-10-16 19:54:19 +08:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.enable = max77686_enable,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
regulator: max77686: Add suspend disable for some LDOs
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 19:14:52 +08:00
|
|
|
.set_suspend_disable = max77686_set_suspend_disable,
|
2012-06-01 12:17:14 +08:00
|
|
|
};
|
|
|
|
|
2017-01-28 22:22:24 +08:00
|
|
|
static const struct regulator_ops max77686_buck_dvs_ops = {
|
2012-06-01 12:17:14 +08:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
2012-06-03 22:46:14 +08:00
|
|
|
.map_voltage = regulator_map_voltage_linear,
|
2012-06-01 12:17:14 +08:00
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
2012-10-16 19:54:18 +08:00
|
|
|
.enable = max77686_enable,
|
2012-06-01 12:17:14 +08:00
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
2012-06-19 15:53:42 +08:00
|
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
2021-06-05 09:34:24 +08:00
|
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
regulator: max77686: Add suspend disable for some LDOs
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 19:14:52 +08:00
|
|
|
.set_suspend_disable = max77686_set_suspend_disable,
|
2012-06-01 12:17:14 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define regulator_desc_ldo(num) { \
|
|
|
|
.name = "LDO"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2015-01-05 19:48:43 +08:00
|
|
|
.of_parse_cb = max77686_of_parse_cb, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.id = MAX77686_LDO##num, \
|
|
|
|
.ops = &max77686_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_LDO_MINUV, \
|
|
|
|
.uV_step = MAX77686_LDO_UVSTEP, \
|
2012-06-19 15:53:42 +08:00
|
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
|
|
}
|
2012-10-16 19:54:19 +08:00
|
|
|
#define regulator_desc_lpm_ldo(num) { \
|
|
|
|
.name = "LDO"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2012-10-16 19:54:19 +08:00
|
|
|
.id = MAX77686_LDO##num, \
|
|
|
|
.ops = &max77686_ldo_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_LDO_MINUV, \
|
|
|
|
.uV_step = MAX77686_LDO_UVSTEP, \
|
|
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
|
|
}
|
2012-06-01 12:17:14 +08:00
|
|
|
#define regulator_desc_ldo_low(num) { \
|
2012-10-16 19:54:19 +08:00
|
|
|
.name = "LDO"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2012-10-16 19:54:19 +08:00
|
|
|
.id = MAX77686_LDO##num, \
|
|
|
|
.ops = &max77686_ldo_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_LDO_LOW_MINUV, \
|
|
|
|
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
|
|
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
|
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
|
|
}
|
|
|
|
#define regulator_desc_ldo1_low(num) { \
|
2012-06-01 12:17:14 +08:00
|
|
|
.name = "LDO"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("LDO"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2012-06-01 12:17:14 +08:00
|
|
|
.id = MAX77686_LDO##num, \
|
|
|
|
.ops = &max77686_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_LDO_LOW_MINUV, \
|
|
|
|
.uV_step = MAX77686_LDO_LOW_UVSTEP, \
|
2012-06-19 15:53:42 +08:00
|
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
|
|
<< MAX77686_OPMODE_SHIFT, \
|
|
|
|
}
|
|
|
|
#define regulator_desc_buck(num) { \
|
|
|
|
.name = "BUCK"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("BUCK"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2015-01-05 19:48:43 +08:00
|
|
|
.of_parse_cb = max77686_of_parse_cb, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.id = MAX77686_BUCK##num, \
|
|
|
|
.ops = &max77686_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_BUCK_MINUV, \
|
|
|
|
.uV_step = MAX77686_BUCK_UVSTEP, \
|
2012-06-19 15:53:42 +08:00
|
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
2016-04-29 18:59:51 +08:00
|
|
|
.enable_time = MAX77686_BUCK_ENABLE_TIME, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \
|
|
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK, \
|
|
|
|
}
|
|
|
|
#define regulator_desc_buck1(num) { \
|
|
|
|
.name = "BUCK"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("BUCK"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2012-06-01 12:17:14 +08:00
|
|
|
.id = MAX77686_BUCK##num, \
|
2012-10-16 19:54:19 +08:00
|
|
|
.ops = &max77686_buck1_ops, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_BUCK_MINUV, \
|
|
|
|
.uV_step = MAX77686_BUCK_UVSTEP, \
|
2012-06-19 15:53:42 +08:00
|
|
|
.ramp_delay = MAX77686_RAMP_DELAY, \
|
2016-04-29 18:59:51 +08:00
|
|
|
.enable_time = MAX77686_BUCK_ENABLE_TIME, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.n_voltages = MAX77686_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_BUCK1OUT, \
|
|
|
|
.vsel_mask = MAX77686_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_BUCK1CTRL, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK, \
|
|
|
|
}
|
|
|
|
#define regulator_desc_buck_dvs(num) { \
|
|
|
|
.name = "BUCK"#num, \
|
2014-11-05 17:47:50 +08:00
|
|
|
.of_match = of_match_ptr("BUCK"#num), \
|
|
|
|
.regulators_node = of_match_ptr("voltage-regulators"), \
|
2012-06-01 12:17:14 +08:00
|
|
|
.id = MAX77686_BUCK##num, \
|
2012-06-04 10:19:18 +08:00
|
|
|
.ops = &max77686_buck_dvs_ops, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.min_uV = MAX77686_DVS_MINUV, \
|
|
|
|
.uV_step = MAX77686_DVS_UVSTEP, \
|
2012-06-19 15:53:42 +08:00
|
|
|
.ramp_delay = MAX77686_DVS_RAMP_DELAY, \
|
2016-04-29 18:59:51 +08:00
|
|
|
.enable_time = MAX77686_DVS_ENABLE_TIME, \
|
2012-06-01 12:17:14 +08:00
|
|
|
.n_voltages = MAX77686_DVS_VSEL_MASK + 1, \
|
|
|
|
.vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \
|
|
|
|
.vsel_mask = MAX77686_DVS_VSEL_MASK, \
|
|
|
|
.enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
|
|
|
|
.enable_mask = MAX77686_OPMODE_MASK \
|
|
|
|
<< MAX77686_OPMODE_BUCK234_SHIFT, \
|
2021-06-05 09:34:24 +08:00
|
|
|
.ramp_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \
|
|
|
|
.ramp_mask = MAX77686_RAMP_RATE_MASK, \
|
|
|
|
.ramp_delay_table = max77686_buck_dvs_ramp_table, \
|
|
|
|
.n_ramp_values = ARRAY_SIZE(max77686_buck_dvs_ramp_table), \
|
2012-06-01 12:17:14 +08:00
|
|
|
}
|
|
|
|
|
2014-10-27 23:03:42 +08:00
|
|
|
static const struct regulator_desc regulators[] = {
|
2012-10-16 19:54:19 +08:00
|
|
|
regulator_desc_ldo1_low(1),
|
2012-06-01 12:17:14 +08:00
|
|
|
regulator_desc_ldo_low(2),
|
|
|
|
regulator_desc_ldo(3),
|
|
|
|
regulator_desc_ldo(4),
|
|
|
|
regulator_desc_ldo(5),
|
|
|
|
regulator_desc_ldo_low(6),
|
|
|
|
regulator_desc_ldo_low(7),
|
|
|
|
regulator_desc_ldo_low(8),
|
|
|
|
regulator_desc_ldo(9),
|
2012-10-16 19:54:19 +08:00
|
|
|
regulator_desc_lpm_ldo(10),
|
|
|
|
regulator_desc_lpm_ldo(11),
|
|
|
|
regulator_desc_lpm_ldo(12),
|
2012-06-01 12:17:14 +08:00
|
|
|
regulator_desc_ldo(13),
|
2012-10-16 19:54:19 +08:00
|
|
|
regulator_desc_lpm_ldo(14),
|
2012-06-01 12:17:14 +08:00
|
|
|
regulator_desc_ldo_low(15),
|
2012-10-16 19:54:19 +08:00
|
|
|
regulator_desc_lpm_ldo(16),
|
2012-06-01 12:17:14 +08:00
|
|
|
regulator_desc_ldo(17),
|
|
|
|
regulator_desc_ldo(18),
|
|
|
|
regulator_desc_ldo(19),
|
|
|
|
regulator_desc_ldo(20),
|
|
|
|
regulator_desc_ldo(21),
|
|
|
|
regulator_desc_ldo(22),
|
|
|
|
regulator_desc_ldo(23),
|
|
|
|
regulator_desc_ldo(24),
|
|
|
|
regulator_desc_ldo(25),
|
|
|
|
regulator_desc_ldo(26),
|
|
|
|
regulator_desc_buck1(1),
|
|
|
|
regulator_desc_buck_dvs(2),
|
|
|
|
regulator_desc_buck_dvs(3),
|
|
|
|
regulator_desc_buck_dvs(4),
|
|
|
|
regulator_desc_buck(5),
|
|
|
|
regulator_desc_buck(6),
|
|
|
|
regulator_desc_buck(7),
|
|
|
|
regulator_desc_buck(8),
|
|
|
|
regulator_desc_buck(9),
|
|
|
|
};
|
|
|
|
|
2012-11-20 02:22:22 +08:00
|
|
|
static int max77686_pmic_probe(struct platform_device *pdev)
|
2012-06-01 12:17:14 +08:00
|
|
|
{
|
|
|
|
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
struct max77686_data *max77686;
|
2014-11-05 17:47:50 +08:00
|
|
|
int i;
|
2012-06-20 15:01:25 +08:00
|
|
|
struct regulator_config config = { };
|
2012-06-01 12:17:14 +08:00
|
|
|
|
|
|
|
dev_dbg(&pdev->dev, "%s\n", __func__);
|
|
|
|
|
|
|
|
max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!max77686)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2018-11-15 16:01:19 +08:00
|
|
|
max77686->dev = &pdev->dev;
|
2014-11-05 17:47:50 +08:00
|
|
|
config.dev = iodev->dev;
|
2012-06-20 13:20:51 +08:00
|
|
|
config.regmap = iodev->regmap;
|
2012-10-16 19:54:18 +08:00
|
|
|
config.driver_data = max77686;
|
2012-06-01 12:17:14 +08:00
|
|
|
platform_set_drvdata(pdev, max77686);
|
|
|
|
|
2012-06-08 12:03:04 +08:00
|
|
|
for (i = 0; i < MAX77686_REGULATORS; i++) {
|
2014-03-10 16:32:45 +08:00
|
|
|
struct regulator_dev *rdev;
|
2014-11-04 16:49:41 +08:00
|
|
|
int id = regulators[i].id;
|
2014-03-10 16:32:45 +08:00
|
|
|
|
2014-11-04 16:49:42 +08:00
|
|
|
max77686->opmode[id] = MAX77686_NORMAL;
|
2014-03-10 16:32:45 +08:00
|
|
|
rdev = devm_regulator_register(&pdev->dev,
|
2013-09-04 13:37:54 +08:00
|
|
|
®ulators[i], &config);
|
2014-03-10 16:32:45 +08:00
|
|
|
if (IS_ERR(rdev)) {
|
2014-11-05 17:47:50 +08:00
|
|
|
int ret = PTR_ERR(rdev);
|
2012-06-20 13:20:51 +08:00
|
|
|
dev_err(&pdev->dev,
|
2014-11-05 17:47:50 +08:00
|
|
|
"regulator init failed for %d: %d\n", i, ret);
|
|
|
|
return ret;
|
2012-06-01 12:17:14 +08:00
|
|
|
}
|
|
|
|
}
|
2012-06-08 12:03:04 +08:00
|
|
|
|
2012-06-01 12:17:14 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct platform_device_id max77686_pmic_id[] = {
|
|
|
|
{"max77686-pmic", 0},
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(platform, max77686_pmic_id);
|
|
|
|
|
|
|
|
static struct platform_driver max77686_pmic_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "max77686-pmic",
|
|
|
|
},
|
|
|
|
.probe = max77686_pmic_probe,
|
|
|
|
.id_table = max77686_pmic_id,
|
|
|
|
};
|
|
|
|
|
2016-04-06 21:49:47 +08:00
|
|
|
module_platform_driver(max77686_pmic_driver);
|
2012-06-01 12:17:14 +08:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver");
|
|
|
|
MODULE_AUTHOR("Chiwoong Byun <woong.byun@samsung.com>");
|
|
|
|
MODULE_LICENSE("GPL");
|