linux/include/sound/soc.h

1425 lines
48 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0
*
* linux/sound/soc.h -- ALSA SoC Layer
*
* Author: Liam Girdwood
* Created: Aug 11th 2005
* Copyright: Wolfson Microelectronics. PLC.
*/
#ifndef __LINUX_SND_SOC_H
#define __LINUX_SND_SOC_H
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/notifier.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/regmap.h>
#include <linux/log2.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/compress_driver.h>
#include <sound/control.h>
#include <sound/ac97_codec.h>
/*
* Convenience kcontrol builders
*/
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
#define SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, xmax, xinvert, xautodisable) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, .shift = shift_left, \
.rshift = shift_right, .max = xmax, .platform_max = xmax, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
.invert = xinvert, .autodisable = xautodisable})
#define SOC_DOUBLE_S_VALUE(xreg, shift_left, shift_right, xmin, xmax, xsign_bit, xinvert, xautodisable) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, .shift = shift_left, \
.rshift = shift_right, .min = xmin, .max = xmax, .platform_max = xmax, \
.sign_bit = xsign_bit, .invert = xinvert, .autodisable = xautodisable})
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, xautodisable) \
SOC_DOUBLE_VALUE(xreg, xshift, xshift, xmax, xinvert, xautodisable)
#define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .max = xmax, .platform_max = xmax, .invert = xinvert})
#define SOC_DOUBLE_R_VALUE(xlreg, xrreg, xshift, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xlreg, .rreg = xrreg, .shift = xshift, .rshift = xshift, \
.max = xmax, .platform_max = xmax, .invert = xinvert})
#define SOC_DOUBLE_R_S_VALUE(xlreg, xrreg, xshift, xmin, xmax, xsign_bit, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xlreg, .rreg = xrreg, .shift = xshift, .rshift = xshift, \
.max = xmax, .min = xmin, .platform_max = xmax, .sign_bit = xsign_bit, \
.invert = xinvert})
#define SOC_DOUBLE_R_RANGE_VALUE(xlreg, xrreg, xshift, xmin, xmax, xinvert) \
((unsigned long)&(struct soc_mixer_control) \
{.reg = xlreg, .rreg = xrreg, .shift = xshift, .rshift = xshift, \
.min = xmin, .max = xmax, .platform_max = xmax, .invert = xinvert})
#define SOC_SINGLE(xname, reg, shift, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
.put = snd_soc_put_volsw, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
#define SOC_SINGLE_RANGE(xname, xreg, xshift, xmin, xmax, xinvert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw_range, .get = snd_soc_get_volsw_range, \
.put = snd_soc_put_volsw_range, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, .shift = xshift, \
.rshift = xshift, .min = xmin, .max = xmax, \
.platform_max = xmax, .invert = xinvert} }
#define SOC_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
.put = snd_soc_put_volsw, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
#define SOC_SINGLE_SX_TLV(xname, xreg, xshift, xmin, xmax, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array),\
.info = snd_soc_info_volsw_sx, \
.get = snd_soc_get_volsw_sx,\
.put = snd_soc_put_volsw_sx, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, \
.shift = xshift, .rshift = xshift, \
.max = xmax, .min = xmin} }
#define SOC_SINGLE_RANGE_TLV(xname, xreg, xshift, xmin, xmax, xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_range, \
.get = snd_soc_get_volsw_range, .put = snd_soc_put_volsw_range, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, .shift = xshift, \
.rshift = xshift, .min = xmin, .max = xmax, \
.platform_max = xmax, .invert = xinvert} }
#define SOC_DOUBLE(xname, reg, shift_left, shift_right, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
.put = snd_soc_put_volsw, \
.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
max, invert, 0) }
#define SOC_DOUBLE_STS(xname, reg, shift_left, shift_right, max, invert) \
{ \
.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
.access = SNDRV_CTL_ELEM_ACCESS_READ | \
SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
max, invert, 0) }
#define SOC_DOUBLE_R(xname, reg_left, reg_right, xshift, xmax, xinvert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.info = snd_soc_info_volsw, \
.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
xmax, xinvert) }
#define SOC_DOUBLE_R_RANGE(xname, reg_left, reg_right, xshift, xmin, \
xmax, xinvert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw_range, \
.get = snd_soc_get_volsw_range, .put = snd_soc_put_volsw_range, \
.private_value = SOC_DOUBLE_R_RANGE_VALUE(reg_left, reg_right, \
xshift, xmin, xmax, xinvert) }
#define SOC_DOUBLE_TLV(xname, reg, shift_left, shift_right, max, invert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \
.put = snd_soc_put_volsw, \
.private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
max, invert, 0) }
#define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
xmax, xinvert) }
#define SOC_DOUBLE_R_RANGE_TLV(xname, reg_left, reg_right, xshift, xmin, \
xmax, xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_range, \
.get = snd_soc_get_volsw_range, .put = snd_soc_put_volsw_range, \
.private_value = SOC_DOUBLE_R_RANGE_VALUE(reg_left, reg_right, \
xshift, xmin, xmax, xinvert) }
#define SOC_DOUBLE_R_SX_TLV(xname, xreg, xrreg, xshift, xmin, xmax, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_sx, \
.get = snd_soc_get_volsw_sx, \
.put = snd_soc_put_volsw_sx, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xrreg, \
.shift = xshift, .rshift = xshift, \
.max = xmax, .min = xmin} }
#define SOC_DOUBLE_R_S_TLV(xname, reg_left, reg_right, xshift, xmin, xmax, xsign_bit, xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = snd_soc_get_volsw, .put = snd_soc_put_volsw, \
.private_value = SOC_DOUBLE_R_S_VALUE(reg_left, reg_right, xshift, \
xmin, xmax, xsign_bit, xinvert) }
#define SOC_SINGLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
.put = snd_soc_put_volsw, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, \
.min = xmin, .max = xmax, .platform_max = xmax, \
.sign_bit = 7,} }
#define SOC_DOUBLE_S8_TLV(xname, xreg, xmin, xmax, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\
.put = snd_soc_put_volsw, \
.private_value = SOC_DOUBLE_S_VALUE(xreg, 0, 8, xmin, xmax, 7, 0, 0) }
#define SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xitems, xtexts) \
{ .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
.items = xitems, .texts = xtexts, \
.mask = xitems ? roundup_pow_of_two(xitems) - 1 : 0}
#define SOC_ENUM_SINGLE(xreg, xshift, xitems, xtexts) \
SOC_ENUM_DOUBLE(xreg, xshift, xshift, xitems, xtexts)
#define SOC_ENUM_SINGLE_EXT(xitems, xtexts) \
{ .items = xitems, .texts = xtexts }
#define SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xitems, xtexts, xvalues) \
{ .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \
.mask = xmask, .items = xitems, .texts = xtexts, .values = xvalues}
#define SOC_VALUE_ENUM_SINGLE(xreg, xshift, xmask, xitems, xtexts, xvalues) \
SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xitems, xtexts, xvalues)
#define SOC_VALUE_ENUM_SINGLE_AUTODISABLE(xreg, xshift, xmask, xitems, xtexts, xvalues) \
{ .reg = xreg, .shift_l = xshift, .shift_r = xshift, \
.mask = xmask, .items = xitems, .texts = xtexts, \
.values = xvalues, .autodisable = 1}
#define SOC_ENUM_SINGLE_VIRT(xitems, xtexts) \
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, xitems, xtexts)
#define SOC_ENUM(xname, xenum) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,\
.info = snd_soc_info_enum_double, \
.get = snd_soc_get_enum_double, .put = snd_soc_put_enum_double, \
.private_value = (unsigned long)&xenum }
#define SOC_SINGLE_EXT(xname, xreg, xshift, xmax, xinvert,\
xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, 0) }
#define SOC_DOUBLE_EXT(xname, reg, shift_left, shift_right, max, invert,\
xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
SOC_DOUBLE_VALUE(reg, shift_left, shift_right, max, invert, 0) }
#define SOC_DOUBLE_R_EXT(xname, reg_left, reg_right, xshift, xmax, xinvert,\
xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
xmax, xinvert) }
#define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
.private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, 0) }
#define SOC_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_range, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, .shift = xshift, \
.rshift = xshift, .min = xmin, .max = xmax, \
.platform_max = xmax, .invert = xinvert} }
#define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, \
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
xmax, xinvert, 0) }
#define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = SOC_DOUBLE_R_VALUE(reg_left, reg_right, xshift, \
xmax, xinvert) }
#define SOC_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_bool_ext, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = xdata }
#define SOC_ENUM_EXT(xname, xenum, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_enum_double, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = (unsigned long)&xenum }
#define SOC_VALUE_ENUM_EXT(xname, xenum, xhandler_get, xhandler_put) \
SOC_ENUM_EXT(xname, xenum, xhandler_get, xhandler_put)
#define SND_SOC_BYTES(xname, xbase, xregs) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_bytes_info, .get = snd_soc_bytes_get, \
.put = snd_soc_bytes_put, .private_value = \
((unsigned long)&(struct soc_bytes) \
{.base = xbase, .num_regs = xregs }) }
#define SND_SOC_BYTES_E(xname, xbase, xregs, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_bytes_info, .get = xhandler_get, \
.put = xhandler_put, .private_value = \
((unsigned long)&(struct soc_bytes) \
{.base = xbase, .num_regs = xregs }) }
#define SND_SOC_BYTES_MASK(xname, xbase, xregs, xmask) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_bytes_info, .get = snd_soc_bytes_get, \
.put = snd_soc_bytes_put, .private_value = \
((unsigned long)&(struct soc_bytes) \
{.base = xbase, .num_regs = xregs, \
.mask = xmask }) }
/*
* SND_SOC_BYTES_EXT is deprecated, please USE SND_SOC_BYTES_TLV instead
*/
#define SND_SOC_BYTES_EXT(xname, xcount, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_bytes_info_ext, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = (unsigned long)&(struct soc_bytes_ext) \
{.max = xcount} }
#define SND_SOC_BYTES_TLV(xname, xcount, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READWRITE | \
SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \
.tlv.c = (snd_soc_bytes_tlv_callback), \
.info = snd_soc_bytes_info_ext, \
.private_value = (unsigned long)&(struct soc_bytes_ext) \
{.max = xcount, .get = xhandler_get, .put = xhandler_put, } }
#define SOC_SINGLE_XR_SX(xname, xregbase, xregcount, xnbits, \
xmin, xmax, xinvert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.info = snd_soc_info_xr_sx, .get = snd_soc_get_xr_sx, \
.put = snd_soc_put_xr_sx, \
.private_value = (unsigned long)&(struct soc_mreg_control) \
{.regbase = xregbase, .regcount = xregcount, .nbits = xnbits, \
.invert = xinvert, .min = xmin, .max = xmax} }
#define SOC_SINGLE_STROBE(xname, xreg, xshift, xinvert) \
SOC_SINGLE_EXT(xname, xreg, xshift, 1, xinvert, \
snd_soc_get_strobe, snd_soc_put_strobe)
/*
* Simplified versions of above macros, declaring a struct and calculating
* ARRAY_SIZE internally
*/
#define SOC_ENUM_DOUBLE_DECL(name, xreg, xshift_l, xshift_r, xtexts) \
const struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \
ARRAY_SIZE(xtexts), xtexts)
#define SOC_ENUM_SINGLE_DECL(name, xreg, xshift, xtexts) \
SOC_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xtexts)
#define SOC_ENUM_SINGLE_EXT_DECL(name, xtexts) \
const struct soc_enum name = SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(xtexts), xtexts)
#define SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift_l, xshift_r, xmask, xtexts, xvalues) \
const struct soc_enum name = SOC_VALUE_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, \
ARRAY_SIZE(xtexts), xtexts, xvalues)
#define SOC_VALUE_ENUM_SINGLE_DECL(name, xreg, xshift, xmask, xtexts, xvalues) \
SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xmask, xtexts, xvalues)
#define SOC_VALUE_ENUM_SINGLE_AUTODISABLE_DECL(name, xreg, xshift, xmask, xtexts, xvalues) \
const struct soc_enum name = SOC_VALUE_ENUM_SINGLE_AUTODISABLE(xreg, \
xshift, xmask, ARRAY_SIZE(xtexts), xtexts, xvalues)
#define SOC_ENUM_SINGLE_VIRT_DECL(name, xtexts) \
const struct soc_enum name = SOC_ENUM_SINGLE_VIRT(ARRAY_SIZE(xtexts), xtexts)
/*
* Bias levels
*
* @ON: Bias is fully on for audio playback and capture operations.
* @PREPARE: Prepare for audio operations. Called before DAPM switching for
* stream start and stop operations.
* @STANDBY: Low power standby state when no playback/capture operations are
* in progress. NOTE: The transition time between STANDBY and ON
* should be as fast as possible and no longer than 10ms.
* @OFF: Power Off. No restrictions on transition times.
*/
enum snd_soc_bias_level {
SND_SOC_BIAS_OFF = 0,
SND_SOC_BIAS_STANDBY = 1,
SND_SOC_BIAS_PREPARE = 2,
SND_SOC_BIAS_ON = 3,
};
struct device_node;
struct snd_jack;
struct snd_soc_card;
struct snd_soc_pcm_stream;
struct snd_soc_ops;
struct snd_soc_pcm_runtime;
struct snd_soc_dai;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct snd_soc_dai_driver;
struct snd_soc_dai_link;
struct snd_soc_component;
struct snd_soc_component_driver;
struct soc_enum;
struct snd_soc_jack;
struct snd_soc_jack_zone;
struct snd_soc_jack_pin;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
#include <sound/soc-dapm.h>
ASoC: dpcm: Add Dynamic PCM core operations. The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25 19:12:49 +08:00
#include <sound/soc-dpcm.h>
#include <sound/soc-topology.h>
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct snd_soc_jack_gpio;
typedef int (*hw_write_t)(void *,const char* ,int);
enum snd_soc_pcm_subclass {
SND_SOC_PCM_CLASS_PCM = 0,
SND_SOC_PCM_CLASS_BE = 1,
};
int snd_soc_register_card(struct snd_soc_card *card);
int snd_soc_unregister_card(struct snd_soc_card *card);
int devm_snd_soc_register_card(struct device *dev, struct snd_soc_card *card);
#ifdef CONFIG_PM_SLEEP
int snd_soc_suspend(struct device *dev);
int snd_soc_resume(struct device *dev);
#else
static inline int snd_soc_suspend(struct device *dev)
{
return 0;
}
static inline int snd_soc_resume(struct device *dev)
{
return 0;
}
#endif
int snd_soc_poweroff(struct device *dev);
int snd_soc_add_component(struct device *dev,
struct snd_soc_component *component,
const struct snd_soc_component_driver *component_driver,
struct snd_soc_dai_driver *dai_drv,
int num_dai);
int snd_soc_register_component(struct device *dev,
const struct snd_soc_component_driver *component_driver,
struct snd_soc_dai_driver *dai_drv, int num_dai);
int devm_snd_soc_register_component(struct device *dev,
const struct snd_soc_component_driver *component_driver,
struct snd_soc_dai_driver *dai_drv, int num_dai);
void snd_soc_unregister_component(struct device *dev);
struct snd_soc_component *snd_soc_lookup_component_nolocked(struct device *dev,
const char *driver_name);
struct snd_soc_component *snd_soc_lookup_component(struct device *dev,
const char *driver_name);
int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num);
#ifdef CONFIG_SND_SOC_COMPRESS
int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num);
#else
static inline int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num)
{
return 0;
}
#endif
void snd_soc_disconnect_sync(struct device *dev);
struct snd_soc_pcm_runtime *snd_soc_get_pcm_runtime(struct snd_soc_card *card,
struct snd_soc_dai_link *dai_link);
bool snd_soc_runtime_ignore_pmdown_time(struct snd_soc_pcm_runtime *rtd);
void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd,
int stream, int action);
static inline void snd_soc_runtime_activate(struct snd_soc_pcm_runtime *rtd,
int stream)
{
snd_soc_runtime_action(rtd, stream, 1);
}
static inline void snd_soc_runtime_deactivate(struct snd_soc_pcm_runtime *rtd,
int stream)
{
snd_soc_runtime_action(rtd, stream, -1);
}
int snd_soc_runtime_calc_hw(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hardware *hw, int stream);
int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd,
unsigned int dai_fmt);
#ifdef CONFIG_DMI
int snd_soc_set_dmi_name(struct snd_soc_card *card, const char *flavour);
#else
static inline int snd_soc_set_dmi_name(struct snd_soc_card *card,
const char *flavour)
{
return 0;
}
#endif
/* Utility functions to get clock rates from various things */
int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots);
int snd_soc_params_to_frame_size(struct snd_pcm_hw_params *params);
int snd_soc_calc_bclk(int fs, int sample_size, int channels, int tdm_slots);
int snd_soc_params_to_bclk(struct snd_pcm_hw_params *parms);
/* set runtime hw params */
int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream,
const struct snd_pcm_hardware *hw);
/* Jack reporting */
void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_pin *pins);
void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
struct notifier_block *nb);
void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
struct notifier_block *nb);
int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_zone *zones);
int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage);
#ifdef CONFIG_GPIOLIB
int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios);
int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
struct snd_soc_jack *jack,
int count, struct snd_soc_jack_gpio *gpios);
void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios);
#else
static inline int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
return 0;
}
static inline int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
struct snd_soc_jack *jack,
int count,
struct snd_soc_jack_gpio *gpios)
{
return 0;
}
static inline void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
}
#endif
struct snd_ac97 *snd_soc_alloc_ac97_component(struct snd_soc_component *component);
struct snd_ac97 *snd_soc_new_ac97_component(struct snd_soc_component *component,
unsigned int id, unsigned int id_mask);
void snd_soc_free_ac97_component(struct snd_ac97 *ac97);
#ifdef CONFIG_SND_SOC_AC97_BUS
int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops);
int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops,
struct platform_device *pdev);
extern struct snd_ac97_bus_ops *soc_ac97_ops;
#else
static inline int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops,
struct platform_device *pdev)
{
return 0;
}
static inline int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops)
{
return 0;
}
#endif
/*
*Controls
*/
struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template,
void *data, const char *long_name,
const char *prefix);
int snd_soc_add_component_controls(struct snd_soc_component *component,
const struct snd_kcontrol_new *controls, unsigned int num_controls);
int snd_soc_add_card_controls(struct snd_soc_card *soc_card,
const struct snd_kcontrol_new *controls, int num_controls);
int snd_soc_add_dai_controls(struct snd_soc_dai *dai,
const struct snd_kcontrol_new *controls, int num_controls);
int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_info_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_info_volsw_sx(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
#define snd_soc_info_bool_ext snd_ctl_boolean_mono_info
int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
#define snd_soc_get_volsw_2r snd_soc_get_volsw
#define snd_soc_put_volsw_2r snd_soc_put_volsw
int snd_soc_get_volsw_sx(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_info_volsw_range(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_get_volsw_range(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_limit_volume(struct snd_soc_card *card,
const char *name, int max);
int snd_soc_bytes_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_bytes_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_bytes_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_bytes_info_ext(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *ucontrol);
int snd_soc_bytes_tlv_callback(struct snd_kcontrol *kcontrol, int op_flag,
unsigned int size, unsigned int __user *tlv);
int snd_soc_info_xr_sx(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_get_xr_sx(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_xr_sx(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_get_strobe(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_strobe(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
/**
* struct snd_soc_jack_pin - Describes a pin to update based on jack detection
*
* @pin: name of the pin to update
* @mask: bits to check for in reported jack status
* @invert: if non-zero then pin is enabled when status is not reported
* @list: internal list entry
*/
struct snd_soc_jack_pin {
struct list_head list;
const char *pin;
int mask;
bool invert;
};
/**
* struct snd_soc_jack_zone - Describes voltage zones of jack detection
*
* @min_mv: start voltage in mv
* @max_mv: end voltage in mv
* @jack_type: type of jack that is expected for this voltage
* @debounce_time: debounce_time for jack, codec driver should wait for this
* duration before reading the adc for voltages
* @list: internal list entry
*/
struct snd_soc_jack_zone {
unsigned int min_mv;
unsigned int max_mv;
unsigned int jack_type;
unsigned int debounce_time;
struct list_head list;
};
/**
* struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
*
* @gpio: legacy gpio number
* @idx: gpio descriptor index within the function of the GPIO
* consumer device
* @gpiod_dev: GPIO consumer device
* @name: gpio name. Also as connection ID for the GPIO consumer
* device function name lookup
* @report: value to report when jack detected
* @invert: report presence in low state
* @debounce_time: debounce time in ms
* @wake: enable as wake source
* @jack_status_check: callback function which overrides the detection
* to provide more complex checks (eg, reading an
* ADC).
*/
struct snd_soc_jack_gpio {
unsigned int gpio;
unsigned int idx;
struct device *gpiod_dev;
const char *name;
int report;
int invert;
int debounce_time;
bool wake;
/* private: */
struct snd_soc_jack *jack;
struct delayed_work work;
struct notifier_block pm_notifier;
struct gpio_desc *desc;
void *data;
/* public: */
int (*jack_status_check)(void *data);
};
struct snd_soc_jack {
struct mutex mutex;
struct snd_jack *jack;
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
struct snd_soc_card *card;
struct list_head pins;
int status;
struct blocking_notifier_head notifier;
struct list_head jack_zones;
};
/* SoC PCM stream information */
struct snd_soc_pcm_stream {
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
const char *stream_name;
u64 formats; /* SNDRV_PCM_FMTBIT_* */
unsigned int rates; /* SNDRV_PCM_RATE_* */
unsigned int rate_min; /* min rate */
unsigned int rate_max; /* max rate */
unsigned int channels_min; /* min channels */
unsigned int channels_max; /* max channels */
unsigned int sig_bits; /* number of bits of content */
};
/* SoC audio ops */
struct snd_soc_ops {
int (*startup)(struct snd_pcm_substream *);
void (*shutdown)(struct snd_pcm_substream *);
int (*hw_params)(struct snd_pcm_substream *, struct snd_pcm_hw_params *);
int (*hw_free)(struct snd_pcm_substream *);
int (*prepare)(struct snd_pcm_substream *);
int (*trigger)(struct snd_pcm_substream *, int);
};
struct snd_soc_compr_ops {
int (*startup)(struct snd_compr_stream *);
void (*shutdown)(struct snd_compr_stream *);
int (*set_params)(struct snd_compr_stream *);
int (*trigger)(struct snd_compr_stream *);
};
struct snd_soc_component*
snd_soc_rtdcom_lookup(struct snd_soc_pcm_runtime *rtd,
const char *driver_name);
struct snd_soc_dai_link_component {
const char *name;
struct device_node *of_node;
const char *dai_name;
};
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct snd_soc_dai_link {
/* config - must be set by machine driver */
const char *name; /* Codec name */
const char *stream_name; /* Stream name */
ASoC: make snd_soc_dai_link more symmetrical Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-26 08:22:11 +08:00
/*
* You MAY specify the link's CPU-side device, either by device name,
* or by DT/OF node, but not both. If this information is omitted,
* the CPU-side DAI is matched using .cpu_dai_name only, which hence
* must be globally unique. These fields are currently typically used
* only for codec to codec links, or systems using device tree.
*/
/*
* You MAY specify the DAI name of the CPU DAI. If this information is
* omitted, the CPU-side DAI is matched using .cpu_name/.cpu_of_node
* only, which only works well when that device exposes a single DAI.
*/
struct snd_soc_dai_link_component *cpus;
unsigned int num_cpus;
ASoC: make snd_soc_dai_link more symmetrical Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-26 08:22:11 +08:00
/*
* You MUST specify the link's codec, either by device name, or by
* DT/OF node, but not both.
*/
/* You MUST specify the DAI name within the codec */
struct snd_soc_dai_link_component *codecs;
unsigned int num_codecs;
ASoC: make snd_soc_dai_link more symmetrical Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-26 08:22:11 +08:00
/*
* You MAY specify the link's platform/PCM/DMA driver, either by
* device name, or by DT/OF node, but not both. Some forms of link
ASoC: soc-core: allow no Platform on dai_link dai_link is used to selecting Component (= CPU/Codec/Platform) and DAI (= CPU/Codec). And selected CPU/Codec/Platform components are *listed* on Card. Many drivers don't need special Platform component, but was mandatory at legacy style ALSA SoC. Thus, there is this kind of settings on many drivers. dai_link->platform_of_node = dai_link->cpu_of_node; In this case, soc_bind_dai_link() will pick-up "CPU component" as "Platform component", and try to add it to snd_soc_pcm_runtime. But it will be ignored, because it is already added when CPU bindings. Historically, this kind of "CPU component" is used/selected as "Platform" on many ALSA SoC drivers. OTOH, Dummy Platform will be selected automatically by ALSA SoC if driver doesn't have Platform settings. These indicates that there are 2 type of Platforms exist at current ALSA SoC if driver doesn't need special Platform. 1) use Dummy Platform as Platform component 2) use CPU component as Platform component ALSA SoC will call Dummy Platform callback function if it is using Dummy Platform, but it is completely pointless. Because it is the sound card which doesn't need special Platform. Thus, the behavior we request to ALSA SoC is selecting 2) automatically instead of 1) if sound card doesn't need special Platform. And, 2) means "do nothing" as above explain. These were needed at legacy style dai_link, but is no longer needed at modern style dai_link anymore. This patch allows "no Platform" settings on dai_link, and will do nothing for it if there was no platform settings. This is same as 2). By this patch, all drivers which is selecting "CPU component" as "Platform" can remove such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19 09:14:07 +08:00
* do not need a platform. In such case, platforms are not mandatory.
ASoC: make snd_soc_dai_link more symmetrical Prior to this patch, the CPU side of a DAI link was specified using a single name. Often, this was the result of calling dev_name() on the device providing the DAI, but in the case of a CPU DAI driver that provided multiple DAIs, it needed to mix together both the device name and some device-relative name, in order to form a single globally unique name. However, the CODEC side of the DAI link was specified using separate fields for device (name or OF node) and device-relative DAI name. This patch allows the CPU side of a DAI link to be specified in the same way as the CODEC side, separating concepts of device and device-relative DAI name. I believe this will be important in multi-codec and/or dynamic PCM scenarios, where a single CPU driver provides multiple DAIs, while also booting using device tree, with accompanying desire not to hard-code the CPU side device's name into the original .cpu_dai_name field. Ideally, both the CPU DAI and CODEC DAI loops in soc_bind_dai_link() would now be identical. However, two things prevent that at present: 1) The need to save rtd->codec for the CODEC side, which means we have to search for the CODEC explicitly, and not just the CODEC side DAI. 2) Since we know the CODEC side DAI is part of a codec, and not just a standalone DAI, it's slightly more efficient to convert .codec_name/ .codec_of_node into a codec first, and then compare each DAI's .codec field, since this avoids strcmp() on each DAI's CODEC's name within the loop. However, the two loops are essentially semantically equivalent. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-26 08:22:11 +08:00
*/
struct snd_soc_dai_link_component *platforms;
unsigned int num_platforms;
int id; /* optional ID for machine driver link identification */
ASoC: core: Support transparent CODEC<->CODEC DAI links Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-05 05:12:09 +08:00
const struct snd_soc_pcm_stream *params;
unsigned int num_params;
ASoC: core: Support transparent CODEC<->CODEC DAI links Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-05 05:12:09 +08:00
unsigned int dai_fmt; /* format to set on init */
ASoC: dpcm: Add Dynamic PCM core operations. The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25 19:12:49 +08:00
enum snd_soc_dpcm_trigger trigger[2]; /* trigger type for DPCM */
/* codec/machine specific init - e.g. add machine controls */
int (*init)(struct snd_soc_pcm_runtime *rtd);
/* optional hw_params re-writing for BE and FE sync */
int (*be_hw_params_fixup)(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params);
/* machine stream operations */
const struct snd_soc_ops *ops;
const struct snd_soc_compr_ops *compr_ops;
/* Mark this pcm with non atomic ops */
unsigned int nonatomic:1;
/* For unidirectional dai links */
unsigned int playback_only:1;
unsigned int capture_only:1;
/* Keep DAI active over suspend */
unsigned int ignore_suspend:1;
/* Symmetry requirements */
unsigned int symmetric_rates:1;
unsigned int symmetric_channels:1;
unsigned int symmetric_samplebits:1;
ASoC: dpcm: Add Dynamic PCM core operations. The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25 19:12:49 +08:00
/* Do not create a PCM for this DAI link (Backend link) */
unsigned int no_pcm:1;
/* This DAI link can route to other DAI links at runtime (Frontend)*/
unsigned int dynamic:1;
/* DPCM capture and Playback support */
unsigned int dpcm_capture:1;
unsigned int dpcm_playback:1;
/* DPCM used FE & BE merged format */
unsigned int dpcm_merged_format:1;
/* DPCM used FE & BE merged channel */
unsigned int dpcm_merged_chan:1;
/* DPCM used FE & BE merged rate */
unsigned int dpcm_merged_rate:1;
/* pmdown_time is ignored at stop */
unsigned int ignore_pmdown_time:1;
/* Do not create a PCM for this DAI link (Backend link) */
unsigned int ignore:1;
#ifdef CONFIG_SND_SOC_TOPOLOGY
struct snd_soc_dobj dobj; /* For topology */
#endif
};
#define for_each_link_codecs(link, i, codec) \
for ((i) = 0; \
((i) < link->num_codecs) && ((codec) = &link->codecs[i]); \
(i)++)
#define for_each_link_platforms(link, i, platform) \
for ((i) = 0; \
((i) < link->num_platforms) && \
((platform) = &link->platforms[i]); \
(i)++)
#define for_each_link_cpus(link, i, cpu) \
for ((i) = 0; \
((i) < link->num_cpus) && ((cpu) = &link->cpus[i]); \
(i)++)
/*
* Sample 1 : Single CPU/Codec/Platform
*
* SND_SOC_DAILINK_DEFS(test,
* DAILINK_COMP_ARRAY(COMP_CPU("cpu_dai")),
* DAILINK_COMP_ARRAY(COMP_CODEC("codec", "codec_dai")),
* DAILINK_COMP_ARRAY(COMP_PLATFORM("platform")));
*
* struct snd_soc_dai_link link = {
* ...
* SND_SOC_DAILINK_REG(test),
* };
*
* Sample 2 : Multi CPU/Codec, no Platform
*
* SND_SOC_DAILINK_DEFS(test,
* DAILINK_COMP_ARRAY(COMP_CPU("cpu_dai1"),
* COMP_CPU("cpu_dai2")),
* DAILINK_COMP_ARRAY(COMP_CODEC("codec1", "codec_dai1"),
* COMP_CODEC("codec2", "codec_dai2")));
*
* struct snd_soc_dai_link link = {
* ...
* SND_SOC_DAILINK_REG(test),
* };
*
* Sample 3 : Define each CPU/Codec/Platform manually
*
* SND_SOC_DAILINK_DEF(test_cpu,
* DAILINK_COMP_ARRAY(COMP_CPU("cpu_dai1"),
* COMP_CPU("cpu_dai2")));
* SND_SOC_DAILINK_DEF(test_codec,
* DAILINK_COMP_ARRAY(COMP_CODEC("codec1", "codec_dai1"),
* COMP_CODEC("codec2", "codec_dai2")));
* SND_SOC_DAILINK_DEF(test_platform,
* DAILINK_COMP_ARRAY(COMP_PLATFORM("platform")));
*
* struct snd_soc_dai_link link = {
* ...
* SND_SOC_DAILINK_REG(test_cpu,
* test_codec,
* test_platform),
* };
*
* Sample 4 : Sample3 without platform
*
* struct snd_soc_dai_link link = {
* ...
* SND_SOC_DAILINK_REG(test_cpu,
* test_codec);
* };
*/
#define SND_SOC_DAILINK_REG1(name) SND_SOC_DAILINK_REG3(name##_cpus, name##_codecs, name##_platforms)
#define SND_SOC_DAILINK_REG2(cpu, codec) SND_SOC_DAILINK_REG3(cpu, codec, null_dailink_component)
#define SND_SOC_DAILINK_REG3(cpu, codec, platform) \
.cpus = cpu, \
.num_cpus = ARRAY_SIZE(cpu), \
.codecs = codec, \
.num_codecs = ARRAY_SIZE(codec), \
.platforms = platform, \
.num_platforms = ARRAY_SIZE(platform)
#define SND_SOC_DAILINK_REGx(_1, _2, _3, func, ...) func
#define SND_SOC_DAILINK_REG(...) \
SND_SOC_DAILINK_REGx(__VA_ARGS__, \
SND_SOC_DAILINK_REG3, \
SND_SOC_DAILINK_REG2, \
SND_SOC_DAILINK_REG1)(__VA_ARGS__)
#define SND_SOC_DAILINK_DEF(name, def...) \
static struct snd_soc_dai_link_component name[] = { def }
#define SND_SOC_DAILINK_DEFS(name, cpu, codec, platform...) \
SND_SOC_DAILINK_DEF(name##_cpus, cpu); \
SND_SOC_DAILINK_DEF(name##_codecs, codec); \
SND_SOC_DAILINK_DEF(name##_platforms, platform)
#define DAILINK_COMP_ARRAY(param...) param
#define COMP_EMPTY() { }
#define COMP_CPU(_dai) { .dai_name = _dai, }
#define COMP_CODEC(_name, _dai) { .name = _name, .dai_name = _dai, }
#define COMP_PLATFORM(_name) { .name = _name }
#define COMP_AUX(_name) { .name = _name }
#define COMP_CODEC_CONF(_name) { .name = _name }
#define COMP_DUMMY() { .name = "snd-soc-dummy", .dai_name = "snd-soc-dummy-dai", }
extern struct snd_soc_dai_link_component null_dailink_component[0];
struct snd_soc_codec_conf {
/*
* specify device either by device name, or by
* DT/OF node, but not both.
*/
struct snd_soc_dai_link_component dlc;
/*
* optional map of kcontrol, widget and path name prefixes that are
* associated per device
*/
const char *name_prefix;
};
struct snd_soc_aux_dev {
/*
* specify multi-codec either by device name, or by
* DT/OF node, but not both.
*/
struct snd_soc_dai_link_component dlc;
/* codec/machine specific init - e.g. add machine controls */
int (*init)(struct snd_soc_component *component);
};
/* SoC card */
struct snd_soc_card {
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
const char *name;
const char *long_name;
const char *driver_name;
const char *components;
#ifdef CONFIG_DMI
char dmi_longname[80];
#endif /* CONFIG_DMI */
char topology_shortname[32];
struct device *dev;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct snd_card *snd_card;
struct module *owner;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct mutex mutex;
struct mutex dapm_mutex;
/* Mutex for PCM operations */
struct mutex pcm_mutex;
enum snd_soc_pcm_subclass pcm_subclass;
ASoC: dpcm: prevent snd_soc_dpcm use after free The dpcm get from fe_clients/be_clients may be free before use Add a spin lock at snd_soc_card level, to protect the dpcm instance. The lock may be used in atomic context, so use spin lock. Use irq spin lock version, since the lock may be used in interrupts. possible race condition between void dpcm_be_disconnect( ... list_del(&dpcm->list_be); list_del(&dpcm->list_fe); kfree(dpcm); ... and for_each_dpcm_fe() for_each_dpcm_be*() race condition example Thread 1: snd_soc_dapm_mixer_update_power() -> soc_dpcm_runtime_update() -> dpcm_be_disconnect() -> kfree(dpcm); Thread 2: dpcm_fe_dai_trigger() -> dpcm_be_dai_trigger() -> snd_soc_dpcm_can_be_free_stop() -> if (dpcm->fe == fe) Excpetion Scenario: two FE link to same BE FE1 -> BE FE2 -> Thread 1: switch of mixer between FE2 -> BE Thread 2: pcm_stop FE1 Exception: Unable to handle kernel paging request at virtual address dead0000000000e0 pc=<> [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c sound/soc/soc-pcm.c:3226 if (dpcm->fe == fe) lr=<> [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c Backtrace: [<ffffff89602dba80>] notify_die+0x68/0xb8 [<ffffff896028c7dc>] die+0x118/0x2a8 [<ffffff89602a2f84>] __do_kernel_fault+0x13c/0x14c [<ffffff89602a27f4>] do_translation_fault+0x64/0xa0 [<ffffff8960280cf8>] do_mem_abort+0x4c/0xd0 [<ffffff8960282ad0>] el1_da+0x24/0x40 [<ffffff8960e2cd10>] dpcm_be_dai_trigger+0x29c/0x47c [<ffffff8960e2f694>] dpcm_fe_dai_do_trigger+0x94/0x26c [<ffffff8960e2edec>] dpcm_fe_dai_trigger+0x3c/0x44 [<ffffff8960de5588>] snd_pcm_do_stop+0x50/0x5c [<ffffff8960dded24>] snd_pcm_action+0xb4/0x13c [<ffffff8960ddfdb4>] snd_pcm_drop+0xa0/0x128 [<ffffff8960de69bc>] snd_pcm_common_ioctl+0x9d8/0x30f0 [<ffffff8960de1cac>] snd_pcm_ioctl_compat+0x29c/0x2f14 [<ffffff89604c9d60>] compat_SyS_ioctl+0x128/0x244 [<ffffff8960283740>] el0_svc_naked+0x34/0x38 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-08 13:05:53 +08:00
spinlock_t dpcm_lock;
int (*probe)(struct snd_soc_card *card);
int (*late_probe)(struct snd_soc_card *card);
int (*remove)(struct snd_soc_card *card);
/* the pre and post PM functions are used to do any PM work before and
* after the codec and DAI's do any PM work. */
int (*suspend_pre)(struct snd_soc_card *card);
int (*suspend_post)(struct snd_soc_card *card);
int (*resume_pre)(struct snd_soc_card *card);
int (*resume_post)(struct snd_soc_card *card);
/* callbacks */
int (*set_bias_level)(struct snd_soc_card *,
struct snd_soc_dapm_context *dapm,
enum snd_soc_bias_level level);
int (*set_bias_level_post)(struct snd_soc_card *,
struct snd_soc_dapm_context *dapm,
enum snd_soc_bias_level level);
int (*add_dai_link)(struct snd_soc_card *,
struct snd_soc_dai_link *link);
void (*remove_dai_link)(struct snd_soc_card *,
struct snd_soc_dai_link *link);
long pmdown_time;
/* CPU <--> Codec DAI links */
struct snd_soc_dai_link *dai_link; /* predefined links only */
int num_links; /* predefined links only */
2015-11-18 15:34:11 +08:00
struct list_head rtd_list;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
int num_rtd;
/* optional codec specific configuration */
struct snd_soc_codec_conf *codec_conf;
int num_configs;
/*
* optional auxiliary devices such as amplifiers or codecs with DAI
* link unused
*/
struct snd_soc_aux_dev *aux_dev;
int num_aux_devs;
struct list_head aux_comp_list;
const struct snd_kcontrol_new *controls;
int num_controls;
/*
* Card-specific routes and widgets.
* Note: of_dapm_xxx for Device Tree; Otherwise for driver build-in.
*/
const struct snd_soc_dapm_widget *dapm_widgets;
int num_dapm_widgets;
const struct snd_soc_dapm_route *dapm_routes;
int num_dapm_routes;
const struct snd_soc_dapm_widget *of_dapm_widgets;
int num_of_dapm_widgets;
const struct snd_soc_dapm_route *of_dapm_routes;
int num_of_dapm_routes;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
/* lists of probed devices belonging to this card */
struct list_head component_dev_list;
struct list_head list;
struct list_head widgets;
struct list_head paths;
struct list_head dapm_list;
struct list_head dapm_dirty;
/* attached dynamic objects */
struct list_head dobj_list;
/* Generic DAPM context for the card */
struct snd_soc_dapm_context dapm;
struct snd_soc_dapm_stats dapm_stats;
struct snd_soc_dapm_update *update;
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_card_root;
#endif
#ifdef CONFIG_PM_SLEEP
struct work_struct deferred_resume_work;
#endif
u32 pop_time;
/* bit field */
unsigned int instantiated:1;
unsigned int topology_shortname_created:1;
unsigned int fully_routed:1;
unsigned int disable_route_checks:1;
unsigned int probed:1;
void *drvdata;
};
#define for_each_card_prelinks(card, i, link) \
for ((i) = 0; \
((i) < (card)->num_links) && ((link) = &(card)->dai_link[i]); \
(i)++)
#define for_each_card_pre_auxs(card, i, aux) \
for ((i) = 0; \
((i) < (card)->num_aux_devs) && ((aux) = &(card)->aux_dev[i]); \
(i)++)
#define for_each_card_rtds(card, rtd) \
list_for_each_entry(rtd, &(card)->rtd_list, list)
#define for_each_card_rtds_safe(card, rtd, _rtd) \
list_for_each_entry_safe(rtd, _rtd, &(card)->rtd_list, list)
#define for_each_card_auxs(card, component) \
list_for_each_entry(component, &card->aux_comp_list, card_aux_list)
#define for_each_card_auxs_safe(card, component, _comp) \
list_for_each_entry_safe(component, _comp, \
&card->aux_comp_list, card_aux_list)
#define for_each_card_components(card, component) \
list_for_each_entry(component, &(card)->component_dev_list, card_list)
#define for_each_card_dapms(card, dapm) \
list_for_each_entry(dapm, &card->dapm_list, list)
#define for_each_card_widgets(card, w)\
list_for_each_entry(w, &card->widgets, list)
#define for_each_card_widgets_safe(card, w, _w) \
list_for_each_entry_safe(w, _w, &card->widgets, list)
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
/* SoC machine DAI configuration, glues a codec and cpu DAI together */
struct snd_soc_pcm_runtime {
struct device *dev;
struct snd_soc_card *card;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct snd_soc_dai_link *dai_link;
struct snd_pcm_ops ops;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
unsigned int params_select; /* currently selected param for dai link */
ASoC: dpcm: Add Dynamic PCM core operations. The Dynamic PCM core allows digital audio data to be dynamically routed between different ALSA PCMs and DAI links on SoC CPUs with on chip DSP devices. e.g. audio data could be played on pcm:0,0 and routed to any (or all) SoC DAI links. Dynamic PCM introduces the concept of Front End (FE) PCMs and Back End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that they can dynamically route digital audio data to any supported BE PCM. A BE PCM has no ALSA device, but represents a DAI link and it's substream and audio HW parameters. e.g. pcm:0,0 routing digital data to 2 external codecs. FE pcm:0,0 ----> BE (McBSP.0) ----> CODEC 0 +--> BE (McPDM.0) ----> CODEC 1 e.g. pcm:0,0 and pcm:0,1 routing digital data to 1 external codec. FE pcm:0,0 --- +--> BE (McBSP.0) ----> CODEC FE pcm:0,1 --- The digital audio routing is controlled by the usual ALSA method of mixer kcontrols. Dynamic PCM uses a DAPM graph to work out the routing based upon the mixer settings and configures the BE PCMs based on routing and the FE HW params. DPCM is designed so that most ASoC component drivers will need no modification at all. It's intended that existing CODEC, DAI and platform drivers can be used in DPCM based audio devices without any changes. However, there will be some cases where minor changes are required (e.g. for very tightly coupled HW) and there are helpers to support this too. Somethimes the HW params of a FE and BE do not match or are incompatible, so in these cases the machine driver can reconfigure any hw_params and make any DSP perform sample rate / format conversion. This patch adds the core DPCM code and contains :- o The FE and BE PCM operations. o FE and BE DAI link support. o FE and BE PCM creation. o BE support API. o BE and FE link management. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25 19:12:49 +08:00
/* Dynamic PCM BE runtime data */
struct snd_soc_dpcm_runtime dpcm[2];
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
long pmdown_time;
/* runtime devices */
struct snd_pcm *pcm;
struct snd_compr *compr;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
/*
* dais = cpu_dai + codec_dai
* see
* soc_new_pcm_runtime()
* asoc_rtd_to_cpu()
* asoc_rtd_to_codec()
*/
struct snd_soc_dai **dais;
unsigned int num_codecs;
unsigned int num_cpus;
struct snd_soc_dapm_widget *playback_widget;
struct snd_soc_dapm_widget *capture_widget;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct delayed_work delayed_work;
void (*close_delayed_work_func)(struct snd_soc_pcm_runtime *rtd);
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_dpcm_root;
#endif
2015-11-18 15:34:11 +08:00
unsigned int num; /* 0-based and monotonic increasing */
struct list_head list; /* rtd list of the soc card */
/* bit field */
unsigned int pop_wait:1;
unsigned int fe_compr:1; /* for Dynamic PCM */
ASoC: soc-core: remove snd_soc_rtdcom_list Current ALSA SoC is using struct snd_soc_rtdcom_list to connecting component to rtd by using list_head. struct snd_soc_rtdcom_list { struct snd_soc_component *component; struct list_head list; /* rtd::component_list */ }; struct snd_soc_pcm_runtime { ... struct list_head component_list; /* list of connected components */ ... }; The CPU/Codec/Platform component which will be connected to rtd (a) is indicated via dai_link at snd_soc_add_pcm_runtime() int snd_soc_add_pcm_runtime(...) { ... /* Find CPU from registered CPUs */ rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus); ... (a) snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component); ... /* Find CODEC from registered CODECs */ (b) for_each_link_codecs(dai_link, i, codec) { rtd->codec_dais[i] = snd_soc_find_dai(codec); ... (a) snd_soc_rtdcom_add(rtd, rtd->codec_dais[i]->component); } ... /* Find PLATFORM from registered PLATFORMs */ (b) for_each_link_platforms(dai_link, i, platform) { for_each_component(component) { ... (a) snd_soc_rtdcom_add(rtd, component); } } } It shows, it is possible to know how many components will be connected to rtd by using dai_link->num_cpus dai_link->num_codecs dai_link->num_platforms If so, we can use component pointer array instead of list_head, in such case, code can be more simple. This patch removes struct snd_soc_rtdcom_list that is only of temporary value, and convert to pointer array. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87a76wt4wm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10 10:35:21 +08:00
int num_components;
ASoC: soc-core: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200507192228.GA16355@embeddedor Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-08 03:22:28 +08:00
struct snd_soc_component *components[]; /* CPU/Codec/Platform */
};
/* see soc_new_pcm_runtime() */
#define asoc_rtd_to_cpu(rtd, n) (rtd)->dais[n]
#define asoc_rtd_to_codec(rtd, n) (rtd)->dais[n + (rtd)->num_cpus]
ASoC: soc-core: remove snd_soc_rtdcom_list Current ALSA SoC is using struct snd_soc_rtdcom_list to connecting component to rtd by using list_head. struct snd_soc_rtdcom_list { struct snd_soc_component *component; struct list_head list; /* rtd::component_list */ }; struct snd_soc_pcm_runtime { ... struct list_head component_list; /* list of connected components */ ... }; The CPU/Codec/Platform component which will be connected to rtd (a) is indicated via dai_link at snd_soc_add_pcm_runtime() int snd_soc_add_pcm_runtime(...) { ... /* Find CPU from registered CPUs */ rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus); ... (a) snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component); ... /* Find CODEC from registered CODECs */ (b) for_each_link_codecs(dai_link, i, codec) { rtd->codec_dais[i] = snd_soc_find_dai(codec); ... (a) snd_soc_rtdcom_add(rtd, rtd->codec_dais[i]->component); } ... /* Find PLATFORM from registered PLATFORMs */ (b) for_each_link_platforms(dai_link, i, platform) { for_each_component(component) { ... (a) snd_soc_rtdcom_add(rtd, component); } } } It shows, it is possible to know how many components will be connected to rtd by using dai_link->num_cpus dai_link->num_codecs dai_link->num_platforms If so, we can use component pointer array instead of list_head, in such case, code can be more simple. This patch removes struct snd_soc_rtdcom_list that is only of temporary value, and convert to pointer array. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87a76wt4wm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10 10:35:21 +08:00
#define for_each_rtd_components(rtd, i, component) \
for ((i) = 0, component = NULL; \
ASoC: soc-core: remove snd_soc_rtdcom_list Current ALSA SoC is using struct snd_soc_rtdcom_list to connecting component to rtd by using list_head. struct snd_soc_rtdcom_list { struct snd_soc_component *component; struct list_head list; /* rtd::component_list */ }; struct snd_soc_pcm_runtime { ... struct list_head component_list; /* list of connected components */ ... }; The CPU/Codec/Platform component which will be connected to rtd (a) is indicated via dai_link at snd_soc_add_pcm_runtime() int snd_soc_add_pcm_runtime(...) { ... /* Find CPU from registered CPUs */ rtd->cpu_dai = snd_soc_find_dai(dai_link->cpus); ... (a) snd_soc_rtdcom_add(rtd, rtd->cpu_dai->component); ... /* Find CODEC from registered CODECs */ (b) for_each_link_codecs(dai_link, i, codec) { rtd->codec_dais[i] = snd_soc_find_dai(codec); ... (a) snd_soc_rtdcom_add(rtd, rtd->codec_dais[i]->component); } ... /* Find PLATFORM from registered PLATFORMs */ (b) for_each_link_platforms(dai_link, i, platform) { for_each_component(component) { ... (a) snd_soc_rtdcom_add(rtd, component); } } } It shows, it is possible to know how many components will be connected to rtd by using dai_link->num_cpus dai_link->num_codecs dai_link->num_platforms If so, we can use component pointer array instead of list_head, in such case, code can be more simple. This patch removes struct snd_soc_rtdcom_list that is only of temporary value, and convert to pointer array. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87a76wt4wm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-10 10:35:21 +08:00
((i) < rtd->num_components) && ((component) = rtd->components[i]);\
(i)++)
#define for_each_rtd_cpu_dais(rtd, i, dai) \
for ((i) = 0; \
((i) < rtd->num_cpus) && ((dai) = asoc_rtd_to_cpu(rtd, i)); \
(i)++)
#define for_each_rtd_cpu_dais_rollback(rtd, i, dai) \
for (; (--(i) >= 0) && ((dai) = asoc_rtd_to_cpu(rtd, i));)
#define for_each_rtd_codec_dais(rtd, i, dai) \
for ((i) = 0; \
((i) < rtd->num_codecs) && ((dai) = asoc_rtd_to_codec(rtd, i)); \
(i)++)
#define for_each_rtd_codec_dais_rollback(rtd, i, dai) \
for (; (--(i) >= 0) && ((dai) = asoc_rtd_to_codec(rtd, i));)
#define for_each_rtd_dais(rtd, i, dai) \
for ((i) = 0; \
((i) < (rtd)->num_cpus + (rtd)->num_codecs) && \
((dai) = (rtd)->dais[i]); \
(i)++)
void snd_soc_close_delayed_work(struct snd_soc_pcm_runtime *rtd);
/* mixer control */
struct soc_mixer_control {
int min, max, platform_max;
int reg, rreg;
unsigned int shift, rshift;
unsigned int sign_bit;
ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-05 17:27:31 +08:00
unsigned int invert:1;
unsigned int autodisable:1;
#ifdef CONFIG_SND_SOC_TOPOLOGY
struct snd_soc_dobj dobj;
#endif
};
struct soc_bytes {
int base;
int num_regs;
u32 mask;
};
struct soc_bytes_ext {
int max;
#ifdef CONFIG_SND_SOC_TOPOLOGY
struct snd_soc_dobj dobj;
#endif
/* used for TLV byte control */
int (*get)(struct snd_kcontrol *kcontrol, unsigned int __user *bytes,
unsigned int size);
int (*put)(struct snd_kcontrol *kcontrol, const unsigned int __user *bytes,
unsigned int size);
};
/* multi register control */
struct soc_mreg_control {
long min, max;
unsigned int regbase, regcount, nbits, invert;
};
/* enumerated kcontrol */
struct soc_enum {
int reg;
unsigned char shift_l;
unsigned char shift_r;
unsigned int items;
unsigned int mask;
const char * const *texts;
const unsigned int *values;
unsigned int autodisable:1;
#ifdef CONFIG_SND_SOC_TOPOLOGY
struct snd_soc_dobj dobj;
#endif
};
static inline bool snd_soc_volsw_is_stereo(struct soc_mixer_control *mc)
{
if (mc->reg == mc->rreg && mc->shift == mc->rshift)
return false;
/*
* mc->reg == mc->rreg && mc->shift != mc->rshift, or
* mc->reg != mc->rreg means that the control is
* stereo (bits in one register or in two registers)
*/
return true;
}
static inline unsigned int snd_soc_enum_val_to_item(struct soc_enum *e,
unsigned int val)
{
unsigned int i;
if (!e->values)
return val;
for (i = 0; i < e->items; i++)
if (val == e->values[i])
return i;
return 0;
}
static inline unsigned int snd_soc_enum_item_to_val(struct soc_enum *e,
unsigned int item)
{
if (!e->values)
return item;
return e->values[item];
}
/**
* snd_soc_kcontrol_component() - Returns the component that registered the
* control
* @kcontrol: The control for which to get the component
*
* Note: This function will work correctly if the control has been registered
* for a component. With snd_soc_add_codec_controls() or via table based
* setup for either a CODEC or component driver. Otherwise the behavior is
* undefined.
*/
static inline struct snd_soc_component *snd_soc_kcontrol_component(
struct snd_kcontrol *kcontrol)
{
return snd_kcontrol_chip(kcontrol);
}
int snd_soc_util_init(void);
void snd_soc_util_exit(void);
int snd_soc_of_parse_card_name(struct snd_soc_card *card,
const char *propname);
int snd_soc_of_parse_audio_simple_widgets(struct snd_soc_card *card,
const char *propname);
int snd_soc_of_get_slot_mask(struct device_node *np,
const char *prop_name,
unsigned int *mask);
int snd_soc_of_parse_tdm_slot(struct device_node *np,
unsigned int *tx_mask,
unsigned int *rx_mask,
unsigned int *slots,
unsigned int *slot_width);
void snd_soc_of_parse_node_prefix(struct device_node *np,
struct snd_soc_codec_conf *codec_conf,
struct device_node *of_node,
const char *propname);
static inline
void snd_soc_of_parse_audio_prefix(struct snd_soc_card *card,
struct snd_soc_codec_conf *codec_conf,
struct device_node *of_node,
const char *propname)
{
snd_soc_of_parse_node_prefix(card->dev->of_node,
codec_conf, of_node, propname);
}
int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,
const char *propname);
unsigned int snd_soc_of_parse_daifmt(struct device_node *np,
const char *prefix,
struct device_node **bitclkmaster,
struct device_node **framemaster);
int snd_soc_get_dai_id(struct device_node *ep);
int snd_soc_get_dai_name(struct of_phandle_args *args,
const char **dai_name);
int snd_soc_of_get_dai_name(struct device_node *of_node,
const char **dai_name);
int snd_soc_of_get_dai_link_codecs(struct device *dev,
struct device_node *of_node,
struct snd_soc_dai_link *dai_link);
void snd_soc_of_put_dai_link_codecs(struct snd_soc_dai_link *dai_link);
int snd_soc_add_pcm_runtime(struct snd_soc_card *card,
struct snd_soc_dai_link *dai_link);
void snd_soc_remove_pcm_runtime(struct snd_soc_card *card,
struct snd_soc_pcm_runtime *rtd);
struct snd_soc_dai *snd_soc_register_dai(struct snd_soc_component *component,
struct snd_soc_dai_driver *dai_drv,
bool legacy_dai_naming);
struct snd_soc_dai *devm_snd_soc_register_dai(struct device *dev,
struct snd_soc_component *component,
struct snd_soc_dai_driver *dai_drv,
bool legacy_dai_naming);
void snd_soc_unregister_dai(struct snd_soc_dai *dai);
struct snd_soc_dai *snd_soc_find_dai(
const struct snd_soc_dai_link_component *dlc);
#include <sound/soc-dai.h>
static inline
int snd_soc_fixup_dai_links_platform_name(struct snd_soc_card *card,
const char *platform_name)
{
struct snd_soc_dai_link *dai_link;
const char *name;
int i;
if (!platform_name) /* nothing to do */
return 0;
/* set platform name for each dailink */
for_each_card_prelinks(card, i, dai_link) {
name = devm_kstrdup(card->dev, platform_name, GFP_KERNEL);
if (!name)
return -ENOMEM;
if (!dai_link->platforms)
return -EINVAL;
/* only single platform is supported for now */
dai_link->platforms->name = name;
}
return 0;
}
#ifdef CONFIG_DEBUG_FS
extern struct dentry *snd_soc_debugfs_root;
#endif
extern const struct dev_pm_ops snd_soc_pm_ops;
/* Helper functions */
static inline void snd_soc_dapm_mutex_lock(struct snd_soc_dapm_context *dapm)
{
mutex_lock_nested(&dapm->card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
}
static inline void snd_soc_dapm_mutex_unlock(struct snd_soc_dapm_context *dapm)
{
mutex_unlock(&dapm->card->dapm_mutex);
}
#include <sound/soc-component.h>
#include <sound/soc-card.h>
ASoC: core: Add component pin control functions It's often the case that a codec driver will need to control its own pins. However, if a name_prefix has been applied to this codec it must be included in the name passed to any of the snd_soc_dapm_x_pin() functions. The behaviour of the existing pin control functions is reasonable, since you may want to search for a fully-specified name within the scope of an entire card. This means that we can't apply the prefix in these functions because it will break card-scope searches. Constructing a prefixed string "manually" in codec drivers leads to a lot of repetition of the same code. To make this tidier in codec drivers this patch adds a new set of equivalent functions that take a struct snd_soc_component instead of a dapm context and automatically add the component's name_prefix to the given name. This makes it a simple change in codec drivers to be prefix-safe. The new functions are not quite trivial enough to be inlines and the compiler won't be able to compile-away any part of them. Although it looks somewhat inefficient to have to allocate a temporary buffer and combine strings, the current design of the widget list doesn't lend itself to a more optimized implementation - it's a single list of all widgets on a card and is searched linearly for a matching string. As pin state changes are generally low-frequency events it's unlikely to be a significant issue - at least not enough to rewrite the widget list handling just for this. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-29 23:44:38 +08:00
#endif