korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-29 22:14:41 +08:00
Code Issues Packages Projects Releases Wiki Activity
38b8da7916
linux/arch/arm/boot/dts/da850.dtsi

397 lines
9.3 KiB
Plaintext
Raw Normal View History

ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
/*
* Copyright 2012 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
ARM: davinci: da850: Use #include for all device trees Replace /include/ by #include for da850 device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-06-14 17:45:53 +08:00
#include "skeleton.dtsi"
ARM: davinci: da850: add GPIO DT node Add DT node for Davinci GPIO driver. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-11-22 02:15:30 +08:00
#include <dt-bindings/interrupt-controller/irq.h>
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
/ {
arm {
#address-cells = <1>;
#size-cells = <1>;
ranges;
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
intc: interrupt-controller@fffee000 {
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ARM: dts: da850: There are 101 interrupts. Fix off by one error in da850 device tree in the number of INTC interrupts. Signed-off-by: David Lechner <david@lechnology.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [nsekhar@ti.com: commit message update] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-17 01:00:20 +08:00
ti,intc-size = <101>;
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
reg = <0xfffee000 0x2000>;
};
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
soc@1c00000 {
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
ARM: davinci: da850: move interrupt-parent property to soc node This patch moves 'interrupt-parent' property to soc node, so that the child inherits this property. This avoids adding 'interrupt-parent' property to each node. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: Sekhar Nori <nsekhar@ti.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-25 19:18:44 +08:00
interrupt-parent = <&intc>;
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
pmx_core: pinmux@14120 {
ARM: davinci: da850: add pinctrl driver DT entries For DT, DaVinci platform can use pinctrl-single driver for handling padconf registers. Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required pinctrl DT entries in da850 dts file. Test procedure 1)Populate DT file with NAND node information. 2)Populate board DT file with pinmux information for NAND. 3)Boot and confirm NAND is detected by the kernel. 4)cat /proc/mtd to show partitions. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-16 17:07:39 +08:00
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins function-mask DT property is now a mask for a pin at each pin offset inside a given pincontrol register. Fix DA850 DT data to reflect this change. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> [nsekhar@ti.com: reword commit message for clarity] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-05-21 22:08:02 +08:00
pinctrl-single,function-mask = <0xf>;
ARM: davinci: da850: add pinctrl driver DT entries For DT, DaVinci platform can use pinctrl-single driver for handling padconf registers. Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required pinctrl DT entries in da850 dts file. Test procedure 1)Populate DT file with NAND node information. 2)Populate board DT file with pinmux information for NAND. 3)Boot and confirm NAND is detected by the kernel. 4)cat /proc/mtd to show partitions. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-16 17:07:39 +08:00
status = "disabled";
ARM: davinci: da850: add NAND driver DT entries Add NAND driver DT node and related pinctrl DT data to export NAND functionality on da850 evm. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-16 17:07:41 +08:00
nand_cs3_pins: pinmux_nand_pins {
pinctrl-single,bits = <
/* EMA_OE, EMA_WE */
0x1c 0x00110000 0x00ff0000
/* EMA_CS[4],EMA_CS[3]*/
0x1c 0x00000110 0x00000ff0
/*
* EMA_D[0], EMA_D[1], EMA_D[2],
* EMA_D[3], EMA_D[4], EMA_D[5],
* EMA_D[6], EMA_D[7]
*/
0x24 0x11111111 0xffffffff
/* EMA_A[1], EMA_A[2] */
0x30 0x01100000 0x0ff00000
>;
};
ARM: davinci: da850: add DT node for I2C0 Add I2C0 device tree and pin muxing information to da850-evm. Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850 board dt file to use I2C0 clock. Verified i2c0 node gets created in sys class interface as "/sys/class/i2c-dev/i2c-0/subsystem/i2c-0". nsekhar@ti.com: tested using i2cdetect and i2cdump. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-02-06 17:36:22 +08:00
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,bits = <
/* I2C0_SDA,I2C0_SCL */
0x10 0x00002200 0x0000ff00
>;
};
ARM: DTS: da850: add node for i2c1 da850 has two I2C controllers, but the node for i2c1 was missing. Add node for i2c1 controller and i2c1 pinmux pins. Signed-off-by: Petr Kulhavy <petr@barix.com> [nsekhar@ti.com: fix indentation] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:04 +08:00
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,bits = <
/* I2C1_SDA, I2C1_SCL */
0x10 0x00440000 0x00ff0000
>;
};
ARM: davinci: da850: add mmc DT entries Add DT entry for MMC. Also add entry for pinmux information. Tested: 1) Without GPIO card detection and EDMA support as DT support for GPIO and EDMA are yet come. 2) By creating/deleting files and mounting/unmounting the partition. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-28 21:12:01 +08:00
mmc0_pins: pinmux_mmc_pins {
pinctrl-single,bits = <
/* MMCSD0_DAT[3] MMCSD0_DAT[2]
* MMCSD0_DAT[1] MMCSD0_DAT[0]
* MMCSD0_CMD MMCSD0_CLK
*/
0x28 0x00222222 0x00ffffff
>;
};
ARM: davinci: da850: add EHRPWM & ECAP DT node Add da850 EHRPWM & ECAP DT node along with pin-mux details. Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP clock. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-10 20:12:41 +08:00
ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
pinctrl-single,bits = <
/* EPWM0A */
0xc 0x00000002 0x0000000f
>;
};
ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
pinctrl-single,bits = <
/* EPWM0B */
0xc 0x00000020 0x000000f0
>;
};
ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
pinctrl-single,bits = <
/* EPWM1A */
0x14 0x00000002 0x0000000f
>;
};
ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
pinctrl-single,bits = <
/* EPWM1B */
0x14 0x00000020 0x000000f0
>;
};
ecap0_pins: pinmux_ecap0_pins {
pinctrl-single,bits = <
/* ECAP0_APWM0 */
0x8 0x20000000 0xf0000000
>;
};
ecap1_pins: pinmux_ecap1_pins {
pinctrl-single,bits = <
/* ECAP1_APWM1 */
0x4 0x40000000 0xf0000000
>;
};
ecap2_pins: pinmux_ecap2_pins {
pinctrl-single,bits = <
/* ECAP2_APWM2 */
0x4 0x00000004 0x0000000f
>;
};
ARM: dts: da850: add spi0 to device tree Add device node and pinmux for SoC spi0. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-17 01:00:17 +08:00
spi0_pins: pinmux_spi0_pins {
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0xc 0x00001101 0x0000ff0f
>;
};
spi0_cs0_pin: pinmux_spi0_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x10 0x00000010 0x000000f0
>;
};
spi1_pins: pinmux_spi1_pins {
ARM: davinci: da850: add SPI1 DT node Patch adds SPI1 DT node along with pinmux data. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03 22:09:08 +08:00
pinctrl-single,bits = <
/* SIMO, SOMI, CLK */
0x14 0x00110100 0x00ff0f00
>;
};
spi1_cs0_pin: pinmux_spi1_cs0 {
pinctrl-single,bits = <
/* CS0 */
0x14 0x00000010 0x000000f0
>;
};
ARM: davinci: da850: add DT node for mdio device Add mdio device tree node information to da850 by providing register details and bus frequency of mdio. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-15 14:01:34 +08:00
mdio_pins: pinmux_mdio_pins {
pinctrl-single,bits = <
/* MDIO_CLK, MDIO_D */
0x10 0x00000088 0x000000ff
>;
};
ARM: davinci: da850: add DT node for ethernet Add ethernet device tree node information and pinmux for mii to da850 by providing interrupt details and local mac address. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-17 01:07:09 +08:00
mii_pins: pinmux_mii_pins {
pinctrl-single,bits = <
/*
* MII_TXEN, MII_TXCLK, MII_COL
* MII_TXD_3, MII_TXD_2, MII_TXD_1
* MII_TXD_0
*/
0x8 0x88888880 0xfffffff0
/*
* MII_RXER, MII_CRS, MII_RXCLK
* MII_RXDV, MII_RXD_3, MII_RXD_2
* MII_RXD_1, MII_RXD_0
*/
0xc 0x88888888 0xffffffff
>;
};
ARM: davinci: da850: add DT node for mdio device Add mdio device tree node information to da850 by providing register details and bus frequency of mdio. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-15 14:01:34 +08:00
ARM: davinci: da850: add pinctrl driver DT entries For DT, DaVinci platform can use pinctrl-single driver for handling padconf registers. Enable PINCTRL Kconfig for MACH_DA8XX_DT platform. Add required pinctrl DT entries in da850 dts file. Test procedure 1)Populate DT file with NAND node information. 2)Populate board DT file with pinmux information for NAND. 3)Boot and confirm NAND is detected by the kernel. 4)cat /proc/mtd to show partitions. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-16 17:07:39 +08:00
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
edma0: edma@0 {
ARM: DTS: da850: Use the new DT bindings for the eDMA3 Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:48 +08:00
compatible = "ti,edma3-tpcc";
ARM: DTS: da850: fix edma0 reg space The size of the eDMA0 CC register space is 0x8000 and not 0x10000. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:47 +08:00
/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
reg = <0x0 0x8000>;
ARM: DTS: da850: Use the new DT bindings for the eDMA3 Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:48 +08:00
reg-names = "edma3_cc";
interrupts = <11 12>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
#dma-cells = <2>;
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
edma0_tptc0: tptc@8000 {
ARM: DTS: da850: Use the new DT bindings for the eDMA3 Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:48 +08:00
compatible = "ti,edma3-tptc";
reg = <0x8000 0x400>;
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
edma0_tptc1: tptc@8400 {
ARM: DTS: da850: Use the new DT bindings for the eDMA3 Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:48 +08:00
compatible = "ti,edma3-tptc";
reg = <0x8400 0x400>;
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
ARM: DTS: da850: Add node for edma0 Add DT node for edma0. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-01 14:13:26 +08:00
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
edma1: edma@230000 {
ARM: DTS: da850: Enable eDMA1 The eDMA1 in da850 has only one TPTC and for example MMC1 is HW events are handled by it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:49 +08:00
compatible = "ti,edma3-tpcc";
/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
reg = <0x230000 0x8000>;
reg-names = "edma3_cc";
interrupts = <93 94>;
interrupt-names = "edma3_ccint", "edma3_ccerrint";
#dma-cells = <2>;
ti,tptcs = <&edma1_tptc0 7>;
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
edma1_tptc0: tptc@238000 {
ARM: DTS: da850: Enable eDMA1 The eDMA1 in da850 has only one TPTC and for example MMC1 is HW events are handled by it. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:49 +08:00
compatible = "ti,edma3-tptc";
reg = <0x238000 0x400>;
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
serial0: serial@42000 {
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
compatible = "ns16550a";
reg = <0x42000 0x100>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
serial1: serial@10c000 {
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
compatible = "ns16550a";
reg = <0x10c000 0x100>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
serial2: serial@10d000 {
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
compatible = "ns16550a";
reg = <0x10d000 0x100>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
rtc0: rtc@23000 {
ARM: davinci: da850: add RTC DT entries Add RTC DT entries in da850 dts file. Tested on da850-evm device. Test Procedure: $ date 2013.01.28-10:00:00 # usage: date[YYYY.]MM.DD-hh:mm[:ss] $ hwclock -w (reset board and check system time) Signed-off-by: Mrugesh Katepallewar <mrugesh.mk@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-28 15:47:48 +08:00
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
i2c0: i2c@22000 {
ARM: davinci: da850: add DT node for I2C0 Add I2C0 device tree and pin muxing information to da850-evm. Also, add OF_DEV_AUXDATA for I2C0 controller driver in da850 board dt file to use I2C0 clock. Verified i2c0 node gets created in sys class interface as "/sys/class/i2c-dev/i2c-0/subsystem/i2c-0". nsekhar@ti.com: tested using i2cdetect and i2cdump. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-02-06 17:36:22 +08:00
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ARM: DTS: da850: add node for i2c1 da850 has two I2C controllers, but the node for i2c1 was missing. Add node for i2c1 controller and i2c1 pinmux pins. Signed-off-by: Petr Kulhavy <petr@barix.com> [nsekhar@ti.com: fix indentation] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:04 +08:00
i2c1: i2c@228000 {
compatible = "ti,davinci-i2c";
reg = <0x228000 0x1000>;
interrupts = <51>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
wdt: wdt@21000 {
ARM: davinci: da850: add wdt DT node Add da850 wdt DT node. Add OF_DEV_AUXDATA for wdt driver to use wdt clock. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-02-06 12:00:03 +08:00
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
mmc0: mmc@40000 {
ARM: davinci: da850: add mmc DT entries Add DT entry for MMC. Also add entry for pinmux information. Tested: 1) Without GPIO card detection and EDMA support as DT support for GPIO and EDMA are yet come. 2) By creating/deleting files and mounting/unmounting the partition. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-28 21:12:01 +08:00
compatible = "ti,da830-mmc";
reg = <0x40000 0x1000>;
interrupts = <16>;
ARM: DTS: da850: Enable DMA use for MMC0 Add the needed bindings for MMC0 in order to be able to utilize the DMA instead of PIO mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:50 +08:00
dmas = <&edma0 16 0>, <&edma0 17 0>;
dma-names = "rx", "tx";
ARM: davinci: da850: add mmc DT entries Add DT entry for MMC. Also add entry for pinmux information. Tested: 1) Without GPIO card detection and EDMA support as DT support for GPIO and EDMA are yet come. 2) By creating/deleting files and mounting/unmounting the partition. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-28 21:12:01 +08:00
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
mmc1: mmc@21b000 {
ARM: DTS: da850: Add node for mmc1 da850 has two MMC controller, MMCSD1 is served by eDMA1 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:51 +08:00
compatible = "ti,da830-mmc";
reg = <0x21b000 0x1000>;
interrupts = <72>;
dmas = <&edma1 28 0>, <&edma1 29 0>;
dma-names = "rx", "tx";
status = "disabled";
};
First set of device tree changes for omaps for v4.7 merge window: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXGp/XAAoJEBvUPslcq6VzbhwQAKHgA3os+FR8sj2PRMkr4zwn o4WVhh3A6rEHPB7gR9QpMrc+12eD4eQEb+HpbEd5P4j40DN0BXC82l0BCza5XRsS qBqaPKE983nY3HtisibPufM/0DtMDJmLvUGgAe03mAorrN23pZkvE0MSKVx0EwSl q/c/r19rfFTIz1EDTX8loW4gxPI/lr1iU7G1wX4tKpeA75EBdNG7xgyKmbSzfF1e MnZP4qhKzCRWPN+w41g7hpjdj0sPx3gxCeLn7ofM2WUnxXyMUTtVgMSdUoFhImxF 0Ivsh1uiPz2/HKZSclRYy0yHmeEsEHMGiyYGJXw6+PazlTNDSP+71nC++HMm4Gzr lYUrIgmCNRtyw9nXWcNtcDTPIgM7HreLK39W4e4O+h4D9pb2w3l6C1qdUZRrjydk oODJP7b6OXS3JnOfhO5lsS0rd31CpORWS5lP1NoXfgS3KVV4VNxqDe1bNM3IoqiX ypzY4aiRKRQxUB6OMfRXh3uUSICZnIpMmZehobMOyWAWVU/xZOkVWMbm5aZUevnN 2ywWi5RXryPsa2HiRdtunXA5pM2hHklhabufEC3qz2rO1kPJxIseI2SxkScsDQOi Z8g5zL+2JhKZQgo0/9qYT/mTFbNtsjfq2XwNcxOGx+4QPj9GziGcROW84wHOVxlM Q/H2+GtOuytXEMVQvjqE =zZDR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-25 05:43:56 +08:00
ehrpwm0: pwm@300000 {
ARM: dts: da850: Add new ECAP and EPWM bindings For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-07-12 03:11:46 +08:00
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
ARM: davinci: da850: add EHRPWM & ECAP DT node Add da850 EHRPWM & ECAP DT node along with pin-mux details. Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP clock. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-10 20:12:41 +08:00
#pwm-cells = <3>;
reg = <0x300000 0x2000>;
status = "disabled";
};
First set of device tree changes for omaps for v4.7 merge window: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXGp/XAAoJEBvUPslcq6VzbhwQAKHgA3os+FR8sj2PRMkr4zwn o4WVhh3A6rEHPB7gR9QpMrc+12eD4eQEb+HpbEd5P4j40DN0BXC82l0BCza5XRsS qBqaPKE983nY3HtisibPufM/0DtMDJmLvUGgAe03mAorrN23pZkvE0MSKVx0EwSl q/c/r19rfFTIz1EDTX8loW4gxPI/lr1iU7G1wX4tKpeA75EBdNG7xgyKmbSzfF1e MnZP4qhKzCRWPN+w41g7hpjdj0sPx3gxCeLn7ofM2WUnxXyMUTtVgMSdUoFhImxF 0Ivsh1uiPz2/HKZSclRYy0yHmeEsEHMGiyYGJXw6+PazlTNDSP+71nC++HMm4Gzr lYUrIgmCNRtyw9nXWcNtcDTPIgM7HreLK39W4e4O+h4D9pb2w3l6C1qdUZRrjydk oODJP7b6OXS3JnOfhO5lsS0rd31CpORWS5lP1NoXfgS3KVV4VNxqDe1bNM3IoqiX ypzY4aiRKRQxUB6OMfRXh3uUSICZnIpMmZehobMOyWAWVU/xZOkVWMbm5aZUevnN 2ywWi5RXryPsa2HiRdtunXA5pM2hHklhabufEC3qz2rO1kPJxIseI2SxkScsDQOi Z8g5zL+2JhKZQgo0/9qYT/mTFbNtsjfq2XwNcxOGx+4QPj9GziGcROW84wHOVxlM Q/H2+GtOuytXEMVQvjqE =zZDR -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "First set of device tree changes for omaps for v4.7 merge window" from Tony Lindgren: - Two sets of name and unit address check fixes for dts files. - DMA, McASP, and timer and regulator related dts changes for dra7 - Add more devices for Nokia N9/N950 - Initial support for am335x ICEv2 - Initial support for am572x-IDK - Pinctrl changes for am335x-baltos-ir5221 - Initial support for Amazon Kindle Fire (first generation) - A series of changes to add GPIO controller support for the GPMC driver. The driver changes will be merged separately. - Support for am43xx clkout1 - Pinctrl and RTC changes for am335x-chili - Add support for dra72-evm rev C (SR2.0) * tag 'omap-for-v4.7/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (61 commits) ARM: dts: Add support for dra72-evm rev C (SR2.0) ARM: dts: am335x-chilisom: Enable poweroff PMIC sequence using RTC signal ARM: dts: am335x-chili*: Move Ethernet MAC description from SOM to board ARM: dts: am335x-chili*: Move uart0 description from SOM to board ARM: dts: am43xx: add support for clkout1 clock ARM: dts: omap3-beagle: Provide NAND ready pin ARM: dts: am335x: Provide NAND ready pin ARM: dts: am437x: Provide NAND ready pin ARM: dts: dra7x-evm: Provide NAND ready pin ARM: dts: dm816x: Enable gpio controller for GPMC ARM: dts: dm814x: Enable gpio controller for GPMC ARM: dts: omap3: Enable gpio controller for GPMC ARM: dts: am4372: Enable gpio controller for GPMC ARM: dts: am335x: Enable gpio controller for GPMC ARM: dts: dra7: Enable gpio controller for GPMC ARM: dts: omap5: Enable gpio and interrupt controller for GPMC ARM: dts: omap4: Enable gpio and interrupt controller for GPMC ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC ARM: dts: omap4-kc1: Power off support ARM: dts: omap4-kc1: LEDs support ...
2016-04-25 05:43:56 +08:00
ehrpwm1: pwm@302000 {
ARM: dts: da850: Add new ECAP and EPWM bindings For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-07-12 03:11:46 +08:00
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
ARM: davinci: da850: add EHRPWM & ECAP DT node Add da850 EHRPWM & ECAP DT node along with pin-mux details. Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP clock. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-10 20:12:41 +08:00
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
ecap0: ecap@306000 {
ARM: dts: da850: Add new ECAP and EPWM bindings For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-07-12 03:11:46 +08:00
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
ARM: davinci: da850: add EHRPWM & ECAP DT node Add da850 EHRPWM & ECAP DT node along with pin-mux details. Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP clock. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-10 20:12:41 +08:00
#pwm-cells = <3>;
reg = <0x306000 0x80>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
ecap1: ecap@307000 {
ARM: dts: da850: Add new ECAP and EPWM bindings For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-07-12 03:11:46 +08:00
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
ARM: davinci: da850: add EHRPWM & ECAP DT node Add da850 EHRPWM & ECAP DT node along with pin-mux details. Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP clock. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-10 20:12:41 +08:00
#pwm-cells = <3>;
reg = <0x307000 0x80>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
ecap2: ecap@308000 {
ARM: dts: da850: Add new ECAP and EPWM bindings For some devices, the PWMSS is a parent of eCAP and ePWM and provides the functional clocks for those submodules. The ti,am33xx-ecap and ti,am33xx-ehrpwm bindings were based on this parent child relationship where the functional clock would be grabbed from the module's parent. However, DA850 doesn't have a PWMSS and the eCAP and ePWM provides their functional clock themselves. Therefore, prefer the new binding that doesn't assume this parent child relationship. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Acked-by: Rob Herring <robh@kernel.org> [nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-07-12 03:11:46 +08:00
compatible = "ti,da850-ecap", "ti,am3352-ecap",
"ti,am33xx-ecap";
ARM: davinci: da850: add EHRPWM & ECAP DT node Add da850 EHRPWM & ECAP DT node along with pin-mux details. Also adds OF_DEV_AUXDATA for EHRPWM & ECAP driver to use EHRPWM & ECAP clock. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-10 20:12:41 +08:00
#pwm-cells = <3>;
reg = <0x308000 0x80>;
status = "disabled";
};
ARM: dts: da850: add spi0 to device tree Add device node and pinmux for SoC spi0. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-17 01:00:17 +08:00
spi0: spi@41000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x41000 0x1000>;
num-cs = <6>;
ti,davinci-spi-intr-line = <1>;
interrupts = <20>;
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
spi1: spi@30e000 {
ARM: davinci: da850: add SPI1 DT node Patch adds SPI1 DT node along with pinmux data. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03 22:09:08 +08:00
#address-cells = <1>;
#size-cells = <0>;
compatible = "ti,da830-spi";
reg = <0x30e000 0x1000>;
num-cs = <4>;
ti,davinci-spi-intr-line = <1>;
interrupts = <56>;
ARM: DTS: da850: Enable DMA for SPI1 Add the needed bindings so the SPI driver can use DMA with SPI1. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:52 +08:00
dmas = <&edma0 18 0>, <&edma0 19 0>;
dma-names = "rx", "tx";
ARM: davinci: da850: add SPI1 DT node Patch adds SPI1 DT node along with pinmux data. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03 22:09:08 +08:00
status = "disabled";
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
mdio: mdio@224000 {
ARM: davinci: da850: add DT node for mdio device Add mdio device tree node information to da850 by providing register details and bus frequency of mdio. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-15 14:01:34 +08:00
compatible = "ti,davinci_mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x224000 0x1000>;
ARM: dts: da850: disable mdio and eth0 in da850.dtsi Disable mdio and eth0 in da850.dtsi file. All other devices are disabled by default and not all boards will use these devices, so these should be disabled too. da850-evm.dtb already had status = "okay" for these devices. da850-enbw-cmc.dts did not, so they were added. Signed-off-by: David Lechner <david@lechnology.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [nsekhar@ti.com: commit description updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-17 01:00:19 +08:00
status = "disabled";
ARM: davinci: da850: add DT node for mdio device Add mdio device tree node information to da850 by providing register details and bus frequency of mdio. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-15 14:01:34 +08:00
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
eth0: ethernet@220000 {
ARM: davinci: da850: add DT node for ethernet Add ethernet device tree node information and pinmux for mii to da850 by providing interrupt details and local mac address. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-17 01:07:09 +08:00
compatible = "ti,davinci-dm6467-emac";
reg = <0x220000 0x4000>;
ti,davinci-ctrl-reg-offset = <0x3000>;
ti,davinci-ctrl-mod-reg-offset = <0x2000>;
ti,davinci-ctrl-ram-offset = <0>;
ti,davinci-ctrl-ram-size = <0x2000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <33
34
35
36
>;
ARM: dts: da850: disable mdio and eth0 in da850.dtsi Disable mdio and eth0 in da850.dtsi file. All other devices are disabled by default and not all boards will use these devices, so these should be disabled too. da850-evm.dtb already had status = "okay" for these devices. da850-enbw-cmc.dts did not, so they were added. Signed-off-by: David Lechner <david@lechnology.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [nsekhar@ti.com: commit description updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-17 01:00:19 +08:00
status = "disabled";
ARM: davinci: da850: add DT node for ethernet Add ethernet device tree node information and pinmux for mii to da850 by providing interrupt details and local mac address. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-17 01:07:09 +08:00
};
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
gpio: gpio@226000 {
ARM: davinci: da850: add GPIO DT node Add DT node for Davinci GPIO driver. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-11-22 02:15:30 +08:00
compatible = "ti,dm6441-gpio";
gpio-controller;
ARM: DTS: da850: fix missing #gpio-cells in gpio node The gpio node is missing the mandatory property #gpio-cells, which is causing runtime errors when using GPIOs e.g. with gpio-leds or gpio-keys: "could not get #gpio-cells for /soc/gpio@1e26000" This fixes the problem and adds the missing parameter. The value is 2 according to the gpio-davinci.txt binding. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-05 17:31:37 +08:00
#gpio-cells = <2>;
ARM: davinci: da850: add GPIO DT node Add DT node for Davinci GPIO driver. Signed-off-by: KV Sujith <sujithkv@ti.com> Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-11-22 02:15:30 +08:00
reg = <0x226000 0x1000>;
interrupts = <42 IRQ_TYPE_EDGE_BOTH
43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
ti,ngpio = <144>;
ti,davinci-gpio-unbanked = <0>;
status = "disabled";
};
ARM: DTS: da850: Add node for McASP Node for mcasp0 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-01 14:13:27 +08:00
ARM: dts: davinci: use proper address after @ TI has been using the physical address in DT after the @ in device nodes. The device tree convention is to use the same address that is used for the reg property. This updates all davinci DT files to use the proper convention. Signed-off-by: David Lechner <david@lechnology.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-01 23:42:03 +08:00
mcasp0: mcasp@100000 {
ARM: DTS: da850: Add node for McASP Node for mcasp0 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-01 14:13:27 +08:00
compatible = "ti,da830-mcasp-audio";
reg = <0x100000 0x2000>,
<0x102000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <54>;
interrupt-names = "common";
status = "disabled";
ARM: DTS: da850: Use the new DT bindings for the eDMA3 Switch to use the ti,edma3-tpcc and ti,edma3-tptc binding for the eDMA3. With the new bindings boards can customize and tweak the DMA channel priority to match their needs. With the new binding the memcpy is safe to be used since with the old binding it was not possible for a driver to know which channel is allowed to be used as non HW triggered channel. Using the new binding will allow us to reserve PaRAM slots to be used by the DSP which was not possible before and prevented the da850 boards to be moved to DT only. Note that the DMA memcpy is disabled, it can be enabled by reserving channels for memcpy by adding the following property to the edma node: ti,edma-memcpy-channels = <20 21>; /* Reserving channel 20 and 21 for memcpy */ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Sushaanth Srirangapathi <sushaanth.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-17 21:27:48 +08:00
dmas = <&edma0 1 1>,
<&edma0 0 1>;
ARM: DTS: da850: Add node for McASP Node for mcasp0 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2014-08-01 14:13:27 +08:00
dma-names = "tx", "rx";
};
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
};
ARM: davinci: da850: add NAND driver DT entries Add NAND driver DT node and related pinctrl DT data to export NAND functionality on da850 evm. Signed-off-by: Kumar, Anil <anilkumar.v@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-01-16 17:07:41 +08:00
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
reg = <0x62000000 0x807ff
0x68000000 0x8000>;
ti,davinci-chipselect = <1>;
ti,davinci-mask-ale = <0>;
ti,davinci-mask-cle = <0>;
ti,davinci-mask-chipsel = <0>;
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
status = "disabled";
};
ARM: davinci: da850: add SoC DT data Add DT data for DA850 SoC. Only interrupt controller and serial port information is being added at this time. Signed-off-by: Heiko Schocher <hs@denx.de> [nsekhar@ti.com: refactored DT data into SoC specific and board specific and include SoC data into .dtsi file] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-08-30 16:51:04 +08:00
};
Reference in New Issue Copy Permalink