linux/drivers/acpi/processor_perflib.c

779 lines
19 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:06 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* processor_perflib.c - ACPI Processor P-States Library ($Revision: 71 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2004 Dominik Brodowski <linux@brodo.de>
* Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
* - Added processor hotplug support
*/
#define pr_fmt(fmt) "ACPI: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03 08:49:16 +08:00
#include <linux/acpi.h>
#include <acpi/processor.h>
#ifdef CONFIG_X86
#include <asm/cpufeature.h>
#endif
#define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
static DEFINE_MUTEX(performance_mutex);
/*
* _PPC support is implemented as a CPUfreq policy notifier:
* This means each time a CPUfreq driver registered also with
* the ACPI core is asked to change the speed policy, the maximum
* value is adjusted so that it is within the platform limit.
*
* Also, when a new platform limit value is detected, the CPUfreq
* policy is adjusted accordingly.
*/
/* ignore_ppc:
* -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
* ignore _PPC
* 0 -> cpufreq low level drivers initialized -> consider _PPC values
* 1 -> ignore _PPC totally -> forced by user through boot param
*/
static int ignore_ppc = -1;
module_param(ignore_ppc, int, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
static bool acpi_processor_ppc_in_use;
static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
{
acpi_status status = 0;
unsigned long long ppc = 0;
int ret;
if (!pr)
return -EINVAL;
/*
* _PPC indicates the maximum state currently supported by the platform
* (e.g. 0 = states 0..n; 1 = states 1..n; etc.
*/
status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc);
if (status != AE_NOT_FOUND) {
acpi_processor_ppc_in_use = true;
if (ACPI_FAILURE(status)) {
acpi_evaluation_failure_warn(pr->handle, "_PPC", status);
return -ENODEV;
}
}
pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
(int)ppc, ppc ? "" : "not");
pr->performance_platform_limit = (int)ppc;
if (ppc >= pr->performance->state_count ||
cpufreq: Use per-policy frequency QoS Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-16 18:47:06 +08:00
unlikely(!freq_qos_request_active(&pr->perflib_req)))
return 0;
cpufreq: Use per-policy frequency QoS Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-16 18:47:06 +08:00
ret = freq_qos_update_request(&pr->perflib_req,
pr->performance->states[ppc].core_frequency * 1000);
if (ret < 0) {
pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n",
pr->id, ret);
}
return 0;
}
#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE 0x80
/*
* acpi_processor_ppc_ost: Notify firmware the _PPC evaluation status
* @handle: ACPI processor handle
* @status: the status code of _PPC evaluation
* 0: success. OSPM is now using the performance state specified.
* 1: failure. OSPM has not changed the number of P-states in use
*/
static void acpi_processor_ppc_ost(acpi_handle handle, int status)
{
if (acpi_has_method(handle, "_OST"))
acpi_evaluate_ost(handle, ACPI_PROCESSOR_NOTIFY_PERFORMANCE,
status, NULL);
}
void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
{
int ret;
ACPI: processor_perflib: Do not send _PPC change notification if not ready The following warning was triggered after resumed from S3 - if all the nonboot CPUs were put offline before suspend: [ 1840.329515] unchecked MSR access error: RDMSR from 0x771 at rIP: 0xffffffff86061e3a (native_read_msr+0xa/0x30) [ 1840.329516] Call Trace: [ 1840.329521] __rdmsr_on_cpu+0x33/0x50 [ 1840.329525] generic_exec_single+0x81/0xb0 [ 1840.329527] smp_call_function_single+0xd2/0x100 [ 1840.329530] ? acpi_ds_result_pop+0xdd/0xf2 [ 1840.329532] ? acpi_ds_create_operand+0x215/0x23c [ 1840.329534] rdmsrl_on_cpu+0x57/0x80 [ 1840.329536] ? cpumask_next+0x1b/0x20 [ 1840.329538] ? rdmsrl_on_cpu+0x57/0x80 [ 1840.329541] intel_pstate_update_perf_limits+0xf3/0x220 [ 1840.329544] ? notifier_call_chain+0x4a/0x70 [ 1840.329546] intel_pstate_set_policy+0x4e/0x150 [ 1840.329548] cpufreq_set_policy+0xcd/0x2f0 [ 1840.329550] cpufreq_update_policy+0xb2/0x130 [ 1840.329552] ? cpufreq_update_policy+0x130/0x130 [ 1840.329556] acpi_processor_ppc_has_changed+0x65/0x80 [ 1840.329558] acpi_processor_notify+0x80/0x100 [ 1840.329561] acpi_ev_notify_dispatch+0x44/0x5c [ 1840.329563] acpi_os_execute_deferred+0x14/0x20 [ 1840.329565] process_one_work+0x193/0x3c0 [ 1840.329567] worker_thread+0x35/0x3b0 [ 1840.329569] kthread+0x125/0x140 [ 1840.329571] ? process_one_work+0x3c0/0x3c0 [ 1840.329572] ? kthread_park+0x60/0x60 [ 1840.329575] ? do_syscall_64+0x67/0x180 [ 1840.329577] ret_from_fork+0x25/0x30 [ 1840.329585] unchecked MSR access error: WRMSR to 0x774 (tried to write 0x0000000000000000) at rIP: 0xffffffff86061f78 (native_write_msr+0x8/0x30) [ 1840.329586] Call Trace: [ 1840.329587] __wrmsr_on_cpu+0x37/0x40 [ 1840.329589] generic_exec_single+0x81/0xb0 [ 1840.329592] smp_call_function_single+0xd2/0x100 [ 1840.329594] ? acpi_ds_create_operand+0x215/0x23c [ 1840.329595] ? cpumask_next+0x1b/0x20 [ 1840.329597] wrmsrl_on_cpu+0x57/0x70 [ 1840.329598] ? rdmsrl_on_cpu+0x57/0x80 [ 1840.329599] ? wrmsrl_on_cpu+0x57/0x70 [ 1840.329602] intel_pstate_hwp_set+0xd3/0x150 [ 1840.329604] intel_pstate_set_policy+0x119/0x150 [ 1840.329606] cpufreq_set_policy+0xcd/0x2f0 [ 1840.329607] cpufreq_update_policy+0xb2/0x130 [ 1840.329610] ? cpufreq_update_policy+0x130/0x130 [ 1840.329613] acpi_processor_ppc_has_changed+0x65/0x80 [ 1840.329615] acpi_processor_notify+0x80/0x100 [ 1840.329617] acpi_ev_notify_dispatch+0x44/0x5c [ 1840.329619] acpi_os_execute_deferred+0x14/0x20 [ 1840.329620] process_one_work+0x193/0x3c0 [ 1840.329622] worker_thread+0x35/0x3b0 [ 1840.329624] kthread+0x125/0x140 [ 1840.329625] ? process_one_work+0x3c0/0x3c0 [ 1840.329626] ? kthread_park+0x60/0x60 [ 1840.329628] ? do_syscall_64+0x67/0x180 [ 1840.329631] ret_from_fork+0x25/0x30 This is because if there's only one online CPU, the MSR_PM_ENABLE (package wide)can not be enabled after resumed, due to intel_pstate_hwp_enable() will only be invoked on AP's online process after resumed - if there's no AP online, the HWP remains disabled after resumed (BIOS has disabled it in S3). Then if there comes a _PPC change notification which touches HWP register during this stage, the warning is triggered. Since we don't call acpi_processor_register_performance() when HWP is enabled, the pr->performance will be NULL. When this is NULL we don't need to do _PPC change notification. Reported-by: Doug Smythies <dsmythies@telus.net> Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Yu Chen <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-01-29 10:26:46 +08:00
if (ignore_ppc || !pr->performance) {
/*
* Only when it is notification event, the _OST object
* will be evaluated. Otherwise it is skipped.
*/
if (event_flag)
acpi_processor_ppc_ost(pr->handle, 1);
return;
}
ret = acpi_processor_get_platform_limit(pr);
/*
* Only when it is notification event, the _OST object
* will be evaluated. Otherwise it is skipped.
*/
if (event_flag) {
if (ret < 0)
acpi_processor_ppc_ost(pr->handle, 1);
else
acpi_processor_ppc_ost(pr->handle, 0);
}
if (ret >= 0)
cpufreq_update_limits(pr->id);
}
[ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface This interface is mainly intended (and implemented) for ACPI _PPC BIOS frequency limitations, but other cpufreq drivers can also use it for similar use-cases. Why is this needed: Currently it's not obvious why cpufreq got limited. People see cpufreq/scaling_max_freq reduced, but this could have happened by: - any userspace prog writing to scaling_max_freq - thermal limitations - hardware (_PPC in ACPI case) limitiations Therefore export bios_limit (in kHz) to: - Point the user that it's the BIOS (broken or intended) which limits frequency - Export it as a sysfs interface for userspace progs. While this was a rarely used feature on laptops, there will appear more and more server implemenations providing "Green IT" features like allowing the service processor to limit the frequency. People want to know about HW/BIOS frequency limitations. All ACPI P-state driven cpufreq drivers are covered with this patch: - powernow-k8 - powernow-k7 - acpi-cpufreq Tested with a patched DSDT which limits the first two cores (_PPC returns 1) via _PPC, exposed by bios_limit: # echo 2200000 >cpu2/cpufreq/scaling_max_freq # cat cpu*/cpufreq/scaling_max_freq 2600000 2600000 2200000 2200000 # #scaling_max_freq shows general user/thermal/BIOS limitations # cat cpu*/cpufreq/bios_limit 2600000 2600000 2800000 2800000 # #bios_limit only shows the HW/BIOS limitation CC: Pallipadi Venkatesh <venkatesh.pallipadi@intel.com> CC: Len Brown <lenb@kernel.org> CC: davej@codemonkey.org.uk CC: linux@dominikbrodowski.net Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Dave Jones <davej@redhat.com>
2009-11-19 19:31:01 +08:00
int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
{
struct acpi_processor *pr;
pr = per_cpu(processors, cpu);
if (!pr || !pr->performance || !pr->performance->state_count)
return -ENODEV;
*limit = pr->performance->states[pr->performance_platform_limit].
core_frequency * 1000;
return 0;
}
EXPORT_SYMBOL(acpi_processor_get_bios_limit);
void acpi_processor_ignore_ppc_init(void)
{
if (ignore_ppc < 0)
ignore_ppc = 0;
}
cpufreq: Use per-policy frequency QoS Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-16 18:47:06 +08:00
void acpi_processor_ppc_init(struct cpufreq_policy *policy)
{
unsigned int cpu;
for_each_cpu(cpu, policy->related_cpus) {
struct acpi_processor *pr = per_cpu(processors, cpu);
int ret;
if (!pr)
continue;
ret = freq_qos_add_request(&policy->constraints,
&pr->perflib_req,
FREQ_QOS_MAX, INT_MAX);
if (ret < 0)
pr_err("Failed to add freq constraint for CPU%d (%d)\n",
cpu, ret);
}
}
cpufreq: Use per-policy frequency QoS Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reported-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Diagnosed-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-16 18:47:06 +08:00
void acpi_processor_ppc_exit(struct cpufreq_policy *policy)
{
unsigned int cpu;
for_each_cpu(cpu, policy->related_cpus) {
struct acpi_processor *pr = per_cpu(processors, cpu);
if (pr)
freq_qos_remove_request(&pr->perflib_req);
}
}
static int acpi_processor_get_performance_control(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = 0;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *pct = NULL;
union acpi_object obj = { 0 };
status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
if (ACPI_FAILURE(status)) {
acpi_evaluation_failure_warn(pr->handle, "_PCT", status);
return -ENODEV;
}
pct = (union acpi_object *)buffer.pointer;
if (!pct || (pct->type != ACPI_TYPE_PACKAGE)
|| (pct->package.count != 2)) {
pr_err("Invalid _PCT data\n");
result = -EFAULT;
goto end;
}
/*
* control_register
*/
obj = pct->package.elements[0];
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_pct_register))
|| (obj.buffer.pointer == NULL)) {
pr_err("Invalid _PCT data (control_register)\n");
result = -EFAULT;
goto end;
}
memcpy(&pr->performance->control_register, obj.buffer.pointer,
sizeof(struct acpi_pct_register));
/*
* status_register
*/
obj = pct->package.elements[1];
if ((obj.type != ACPI_TYPE_BUFFER)
|| (obj.buffer.length < sizeof(struct acpi_pct_register))
|| (obj.buffer.pointer == NULL)) {
pr_err("Invalid _PCT data (status_register)\n");
result = -EFAULT;
goto end;
}
memcpy(&pr->performance->status_register, obj.buffer.pointer,
sizeof(struct acpi_pct_register));
end:
kfree(buffer.pointer);
return result;
}
#ifdef CONFIG_X86
/*
* Some AMDs have 50MHz frequency multiples, but only provide 100MHz rounding
* in their ACPI data. Calculate the real values and fix up the _PSS data.
*/
static void amd_fixup_frequency(struct acpi_processor_px *px, int i)
{
u32 hi, lo, fid, did;
int index = px->control & 0x00000007;
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
return;
if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
|| boot_cpu_data.x86 == 0x11) {
rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi);
/*
* MSR C001_0064+:
* Bit 63: PstateEn. Read-write. If set, the P-state is valid.
*/
if (!(hi & BIT(31)))
return;
fid = lo & 0x3f;
did = (lo >> 6) & 7;
if (boot_cpu_data.x86 == 0x10)
px->core_frequency = (100 * (fid + 0x10)) >> did;
else
px->core_frequency = (100 * (fid + 8)) >> did;
}
}
#else
static void amd_fixup_frequency(struct acpi_processor_px *px, int i) {};
#endif
static int acpi_processor_get_performance_states(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_buffer format = { sizeof("NNNNNN"), "NNNNNN" };
struct acpi_buffer state = { 0, NULL };
union acpi_object *pss = NULL;
int i;
int last_invalid = -1;
status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
acpi_evaluation_failure_warn(pr->handle, "_PSS", status);
return -ENODEV;
}
pss = buffer.pointer;
if (!pss || (pss->type != ACPI_TYPE_PACKAGE)) {
pr_err("Invalid _PSS data\n");
result = -EFAULT;
goto end;
}
acpi_handle_debug(pr->handle, "Found %d performance states\n",
pss->package.count);
pr->performance->state_count = pss->package.count;
pr->performance->states =
treewide: kmalloc() -> kmalloc_array() The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 04:55:00 +08:00
kmalloc_array(pss->package.count,
sizeof(struct acpi_processor_px),
GFP_KERNEL);
if (!pr->performance->states) {
result = -ENOMEM;
goto end;
}
for (i = 0; i < pr->performance->state_count; i++) {
struct acpi_processor_px *px = &(pr->performance->states[i]);
state.length = sizeof(struct acpi_processor_px);
state.pointer = px;
acpi_handle_debug(pr->handle, "Extracting state %d\n", i);
status = acpi_extract_package(&(pss->package.elements[i]),
&format, &state);
if (ACPI_FAILURE(status)) {
acpi_handle_warn(pr->handle, "Invalid _PSS data: %s\n",
acpi_format_exception(status));
result = -EFAULT;
kfree(pr->performance->states);
goto end;
}
amd_fixup_frequency(px, i);
acpi_handle_debug(pr->handle,
"State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n",
i,
(u32) px->core_frequency,
(u32) px->power,
(u32) px->transition_latency,
(u32) px->bus_master_latency,
(u32) px->control, (u32) px->status);
/*
* Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
*/
if (!px->core_frequency ||
((u32)(px->core_frequency * 1000) !=
(px->core_frequency * 1000))) {
pr_err(FW_BUG
"Invalid BIOS _PSS frequency found for processor %d: 0x%llx MHz\n",
pr->id, px->core_frequency);
if (last_invalid == -1)
last_invalid = i;
} else {
if (last_invalid != -1) {
/*
* Copy this valid entry over last_invalid entry
*/
memcpy(&(pr->performance->states[last_invalid]),
px, sizeof(struct acpi_processor_px));
++last_invalid;
}
}
}
if (last_invalid == 0) {
pr_err(FW_BUG
"No valid BIOS _PSS frequency found for processor %d\n", pr->id);
result = -EFAULT;
kfree(pr->performance->states);
pr->performance->states = NULL;
}
if (last_invalid > 0)
pr->performance->state_count = last_invalid;
end:
kfree(buffer.pointer);
return result;
}
acpi: Export the acpi_processor_get_performance_info The git commit d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 (cpufreq: handle cpufreq being disabled for all exported function) tightens the cpufreq API by returning errors when disable_cpufreq() had been called. The problem we are hitting is that the module xen-acpi-processor which uses the ACPI's functions: acpi_processor_register_performance, acpi_processor_preregister_performance, and acpi_processor_notify_smm fails at acpi_processor_register_performance with -22. Note that earlier during bootup in arch/x86/xen/setup.c there is also an call to cpufreq's API: disable_cpufreq(). This is b/c we want the Linux kernel to parse the ACPI data, but leave the cpufreq decisions to the hypervisor. In v3.9 all the checks that d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 added are now hit and the calls to cpufreq_register_notifier will now fail. This means that acpi_processor_ppc_init ends up printing: "Warning: Processor Platform Limit not supported" and the acpi_processor_ppc_status is not set. The repercussions of that is that the call to acpi_processor_register_performance fails right away at: if (!(acpi_processor_ppc_status & PPC_REGISTERED)) and we don't progress any further on parsing and extracting the _P* objects. The only reason the Xen code called that function was b/c it was exported and the only way to gather the P-states. But we can also just make acpi_processor_get_performance_info be exported and not use acpi_processor_register_performance. This patch does so. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 02:42:54 +08:00
int acpi_processor_get_performance_info(struct acpi_processor *pr)
{
int result = 0;
if (!pr || !pr->performance || !pr->handle)
return -EINVAL;
if (!acpi_has_method(pr->handle, "_PCT")) {
acpi_handle_debug(pr->handle,
"ACPI-based processor performance control unavailable\n");
return -ENODEV;
}
result = acpi_processor_get_performance_control(pr);
if (result)
goto update_bios;
result = acpi_processor_get_performance_states(pr);
if (result)
goto update_bios;
/* We need to call _PPC once when cpufreq starts */
if (ignore_ppc != 1)
result = acpi_processor_get_platform_limit(pr);
return result;
/*
* Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
* the BIOS is older than the CPU and does not know its frequencies
*/
update_bios:
#ifdef CONFIG_X86
if (acpi_has_method(pr->handle, "_PPC")) {
if(boot_cpu_has(X86_FEATURE_EST))
pr_warn(FW_BUG "BIOS needs update for CPU "
"frequency support\n");
}
#endif
return result;
}
acpi: Export the acpi_processor_get_performance_info The git commit d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 (cpufreq: handle cpufreq being disabled for all exported function) tightens the cpufreq API by returning errors when disable_cpufreq() had been called. The problem we are hitting is that the module xen-acpi-processor which uses the ACPI's functions: acpi_processor_register_performance, acpi_processor_preregister_performance, and acpi_processor_notify_smm fails at acpi_processor_register_performance with -22. Note that earlier during bootup in arch/x86/xen/setup.c there is also an call to cpufreq's API: disable_cpufreq(). This is b/c we want the Linux kernel to parse the ACPI data, but leave the cpufreq decisions to the hypervisor. In v3.9 all the checks that d5aaffa9dd531c978c6f3fea06a2972653bd7fc8 added are now hit and the calls to cpufreq_register_notifier will now fail. This means that acpi_processor_ppc_init ends up printing: "Warning: Processor Platform Limit not supported" and the acpi_processor_ppc_status is not set. The repercussions of that is that the call to acpi_processor_register_performance fails right away at: if (!(acpi_processor_ppc_status & PPC_REGISTERED)) and we don't progress any further on parsing and extracting the _P* objects. The only reason the Xen code called that function was b/c it was exported and the only way to gather the P-states. But we can also just make acpi_processor_get_performance_info be exported and not use acpi_processor_register_performance. This patch does so. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-03-06 02:42:54 +08:00
EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info);
int acpi_processor_pstate_control(void)
{
acpi_status status;
if (!acpi_gbl_FADT.smi_command || !acpi_gbl_FADT.pstate_control)
return 0;
pr_debug("Writing pstate_control [0x%x] to smi_command [0x%x]\n",
acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command);
status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
(u32)acpi_gbl_FADT.pstate_control, 8);
if (ACPI_SUCCESS(status))
return 1;
pr_warn("Failed to write pstate_control [0x%x] to smi_command [0x%x]: %s\n",
acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command,
acpi_format_exception(status));
return -EIO;
}
int acpi_processor_notify_smm(struct module *calling_module)
{
static int is_done;
int result;
if (!acpi_processor_cpufreq_init)
return -EBUSY;
if (!try_module_get(calling_module))
return -EINVAL;
/* is_done is set to negative if an error occurred,
* and to postitive if _no_ error occurred, but SMM
* was already notified. This avoids double notification
* which might lead to unexpected results...
*/
if (is_done > 0) {
module_put(calling_module);
return 0;
} else if (is_done < 0) {
module_put(calling_module);
return is_done;
}
is_done = -EIO;
result = acpi_processor_pstate_control();
if (!result) {
pr_debug("No SMI port or pstate_control\n");
module_put(calling_module);
return 0;
}
if (result < 0) {
module_put(calling_module);
return result;
}
/* Success. If there's no _PPC, we need to fear nothing, so
* we can allow the cpufreq driver to be rmmod'ed. */
is_done = 1;
if (!acpi_processor_ppc_in_use)
module_put(calling_module);
return 0;
}
EXPORT_SYMBOL(acpi_processor_notify_smm);
int acpi_processor_get_psd(acpi_handle handle, struct acpi_psd_package *pdomain)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
struct acpi_buffer state = {0, NULL};
union acpi_object *psd = NULL;
status = acpi_evaluate_object(handle, "_PSD", NULL, &buffer);
if (ACPI_FAILURE(status)) {
return -ENODEV;
}
psd = buffer.pointer;
if (!psd || (psd->type != ACPI_TYPE_PACKAGE)) {
pr_err("Invalid _PSD data\n");
result = -EFAULT;
goto end;
}
if (psd->package.count != 1) {
pr_err("Invalid _PSD data\n");
result = -EFAULT;
goto end;
}
state.length = sizeof(struct acpi_psd_package);
state.pointer = pdomain;
status = acpi_extract_package(&(psd->package.elements[0]),
&format, &state);
if (ACPI_FAILURE(status)) {
pr_err("Invalid _PSD data\n");
result = -EFAULT;
goto end;
}
if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
pr_err("Unknown _PSD:num_entries\n");
result = -EFAULT;
goto end;
}
if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
pr_err("Unknown _PSD:revision\n");
result = -EFAULT;
goto end;
}
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
pr_err("Invalid _PSD:coord_type\n");
result = -EFAULT;
goto end;
}
end:
kfree(buffer.pointer);
return result;
}
EXPORT_SYMBOL(acpi_processor_get_psd);
int acpi_processor_preregister_performance(
struct acpi_processor_performance __percpu *performance)
{
int count_target;
int retval = 0;
unsigned int i, j;
cpumask_var_t covered_cpus;
struct acpi_processor *pr;
struct acpi_psd_package *pdomain;
struct acpi_processor *match_pr;
struct acpi_psd_package *match_pdomain;
if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
return -ENOMEM;
mutex_lock(&performance_mutex);
/*
* Check if another driver has already registered, and abort before
* changing pr->performance if it has. Check input data as well.
*/
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr) {
/* Look only at processors in ACPI namespace */
continue;
}
if (pr->performance) {
retval = -EBUSY;
goto err_out;
}
if (!performance || !per_cpu_ptr(performance, i)) {
retval = -EINVAL;
goto err_out;
}
}
/* Call _PSD for all CPUs */
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
pr->performance = per_cpu_ptr(performance, i);
pdomain = &(pr->performance->domain_info);
if (acpi_processor_get_psd(pr->handle, pdomain)) {
retval = -EINVAL;
continue;
}
}
if (retval)
goto err_ret;
/*
* Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
continue;
if (cpumask_test_cpu(i, covered_cpus))
continue;
pdomain = &(pr->performance->domain_info);
cpumask_set_cpu(i, pr->performance->shared_cpu_map);
cpumask_set_cpu(i, covered_cpus);
if (pdomain->num_processors <= 1)
continue;
/* Validate the Domain info */
count_target = pdomain->num_processors;
if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
pr->performance->shared_type = CPUFREQ_SHARED_TYPE_HW;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ANY;
for_each_possible_cpu(j) {
if (i == j)
continue;
match_pr = per_cpu(processors, j);
if (!match_pr)
continue;
match_pdomain = &(match_pr->performance->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
/* Here i and j are in the same domain */
if (match_pdomain->num_processors != count_target) {
retval = -EINVAL;
goto err_ret;
}
if (pdomain->coord_type != match_pdomain->coord_type) {
retval = -EINVAL;
goto err_ret;
}
cpumask_set_cpu(j, covered_cpus);
cpumask_set_cpu(j, pr->performance->shared_cpu_map);
}
for_each_possible_cpu(j) {
if (i == j)
continue;
match_pr = per_cpu(processors, j);
if (!match_pr)
continue;
match_pdomain = &(match_pr->performance->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
match_pr->performance->shared_type =
pr->performance->shared_type;
cpumask_copy(match_pr->performance->shared_cpu_map,
pr->performance->shared_cpu_map);
}
}
err_ret:
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr || !pr->performance)
continue;
/* Assume no coordination on any error parsing domain info */
if (retval) {
cpumask_clear(pr->performance->shared_cpu_map);
cpumask_set_cpu(i, pr->performance->shared_cpu_map);
pr->performance->shared_type = CPUFREQ_SHARED_TYPE_NONE;
}
pr->performance = NULL; /* Will be set for real in register */
}
err_out:
mutex_unlock(&performance_mutex);
free_cpumask_var(covered_cpus);
return retval;
}
EXPORT_SYMBOL(acpi_processor_preregister_performance);
int
acpi_processor_register_performance(struct acpi_processor_performance
*performance, unsigned int cpu)
{
struct acpi_processor *pr;
if (!acpi_processor_cpufreq_init)
return -EINVAL;
mutex_lock(&performance_mutex);
pr = per_cpu(processors, cpu);
if (!pr) {
mutex_unlock(&performance_mutex);
return -ENODEV;
}
if (pr->performance) {
mutex_unlock(&performance_mutex);
return -EBUSY;
}
WARN_ON(!performance);
pr->performance = performance;
if (acpi_processor_get_performance_info(pr)) {
pr->performance = NULL;
mutex_unlock(&performance_mutex);
return -EIO;
}
mutex_unlock(&performance_mutex);
return 0;
}
EXPORT_SYMBOL(acpi_processor_register_performance);
void acpi_processor_unregister_performance(unsigned int cpu)
{
struct acpi_processor *pr;
mutex_lock(&performance_mutex);
pr = per_cpu(processors, cpu);
if (!pr) {
mutex_unlock(&performance_mutex);
return;
}
if (pr->performance)
kfree(pr->performance->states);
pr->performance = NULL;
mutex_unlock(&performance_mutex);
return;
}
EXPORT_SYMBOL(acpi_processor_unregister_performance);