linux/fs/xfs/xfs_mount.h

429 lines
15 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#ifndef __XFS_MOUNT_H__
#define __XFS_MOUNT_H__
struct xlog;
struct xfs_inode;
[XFS] Concurrent Multi-File Data Streams In media spaces, video is often stored in a frame-per-file format. When dealing with uncompressed realtime HD video streams in this format, it is crucial that files do not get fragmented and that multiple files a placed contiguously on disk. When multiple streams are being ingested and played out at the same time, it is critical that the filesystem does not cross the streams and interleave them together as this creates seek and readahead cache miss latency and prevents both ingest and playout from meeting frame rate targets. This patch set creates a "stream of files" concept into the allocator to place all the data from a single stream contiguously on disk so that RAID array readahead can be used effectively. Each additional stream gets placed in different allocation groups within the filesystem, thereby ensuring that we don't cross any streams. When an AG fills up, we select a new AG for the stream that is not in use. The core of the functionality is the stream tracking - each inode that we create in a directory needs to be associated with the directories' stream. Hence every time we create a file, we look up the directories' stream object and associate the new file with that object. Once we have a stream object for a file, we use the AG that the stream object point to for allocations. If we can't allocate in that AG (e.g. it is full) we move the entire stream to another AG. Other inodes in the same stream are moved to the new AG on their next allocation (i.e. lazy update). Stream objects are kept in a cache and hold a reference on the inode. Hence the inode cannot be reclaimed while there is an outstanding stream reference. This means that on unlink we need to remove the stream association and we also need to flush all the associations on certain events that want to reclaim all unreferenced inodes (e.g. filesystem freeze). SGI-PV: 964469 SGI-Modid: xfs-linux-melb:xfs-kern:29096a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-11 09:09:12 +08:00
struct xfs_mru_cache;
struct xfs_ail;
struct xfs_quotainfo;
struct xfs_da_geometry;
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
/* dynamic preallocation free space thresholds, 5% down to 1% */
enum {
XFS_LOWSP_1_PCNT = 0,
XFS_LOWSP_2_PCNT,
XFS_LOWSP_3_PCNT,
XFS_LOWSP_4_PCNT,
XFS_LOWSP_5_PCNT,
XFS_LOWSP_MAX,
};
/*
* Error Configuration
*
* Error classes define the subsystem the configuration belongs to.
* Error numbers define the errors that are configurable.
*/
enum {
XFS_ERR_METADATA,
XFS_ERR_CLASS_MAX,
};
enum {
XFS_ERR_DEFAULT,
XFS_ERR_EIO,
XFS_ERR_ENOSPC,
XFS_ERR_ENODEV,
XFS_ERR_ERRNO_MAX,
};
#define XFS_ERR_RETRY_FOREVER -1
/*
* Although retry_timeout is in jiffies which is normally an unsigned long,
* we limit the retry timeout to 86400 seconds, or one day. So even a
* signed 32-bit long is sufficient for a HZ value up to 24855. Making it
* signed lets us store the special "-1" value, meaning retry forever.
*/
struct xfs_error_cfg {
struct xfs_kobj kobj;
int max_retries;
long retry_timeout; /* in jiffies, -1 = infinite */
};
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
/*
* The struct xfsmount layout is optimised to separate read-mostly variables
* from variables that are frequently modified. We put the read-mostly variables
* first, then place all the other variables at the end.
*
* Typically, read-mostly variables are those that are set at mount time and
* never changed again, or only change rarely as a result of things like sysfs
* knobs being tweaked.
*/
typedef struct xfs_mount {
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
struct xfs_sb m_sb; /* copy of fs superblock */
struct super_block *m_super;
struct xfs_ail *m_ail; /* fs active log item list */
struct xfs_buf *m_sb_bp; /* buffer for superblock */
char *m_rtname; /* realtime device name */
char *m_logname; /* external log device name */
struct xfs_da_geometry *m_dir_geo; /* directory block geometry */
struct xfs_da_geometry *m_attr_geo; /* attribute block geometry */
struct xlog *m_log; /* log specific stuff */
struct xfs_inode *m_rbmip; /* pointer to bitmap inode */
struct xfs_inode *m_rsumip; /* pointer to summary inode */
struct xfs_inode *m_rootip; /* pointer to root directory */
struct xfs_quotainfo *m_quotainfo; /* disk quota information */
xfs_buftarg_t *m_ddev_targp; /* saves taking the address */
xfs_buftarg_t *m_logdev_targp;/* ptr to log device */
xfs_buftarg_t *m_rtdev_targp; /* ptr to rt device */
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
/*
* Optional cache of rt summary level per bitmap block with the
* invariant that m_rsum_cache[bbno] <= the minimum i for which
* rsum[i][bbno] != 0. Reads and writes are serialized by the rsumip
* inode lock.
*/
uint8_t *m_rsum_cache;
struct xfs_mru_cache *m_filestream; /* per-mount filestream data */
struct workqueue_struct *m_buf_workqueue;
struct workqueue_struct *m_unwritten_workqueue;
struct workqueue_struct *m_cil_workqueue;
struct workqueue_struct *m_reclaim_workqueue;
struct workqueue_struct *m_blockgc_workqueue;
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
struct workqueue_struct *m_sync_workqueue;
int m_bsize; /* fs logical block size */
uint8_t m_blkbit_log; /* blocklog + NBBY */
uint8_t m_blkbb_log; /* blocklog - BBSHIFT */
uint8_t m_agno_log; /* log #ag's */
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
uint8_t m_sectbb_log; /* sectlog - BBSHIFT */
uint m_blockmask; /* sb_blocksize-1 */
uint m_blockwsize; /* sb_blocksize in words */
uint m_blockwmask; /* blockwsize-1 */
uint m_alloc_mxr[2]; /* max alloc btree records */
uint m_alloc_mnr[2]; /* min alloc btree records */
uint m_bmap_dmxr[2]; /* max bmap btree records */
uint m_bmap_dmnr[2]; /* min bmap btree records */
uint m_rmap_mxr[2]; /* max rmap btree records */
uint m_rmap_mnr[2]; /* min rmap btree records */
uint m_refc_mxr[2]; /* max refc btree records */
uint m_refc_mnr[2]; /* min refc btree records */
uint m_ag_maxlevels; /* XFS_AG_MAXLEVELS */
uint m_bm_maxlevels[2]; /* XFS_BM_MAXLEVELS */
uint m_rmap_maxlevels; /* max rmap btree levels */
uint m_refc_maxlevels; /* max refcount btree level */
xfs_extlen_t m_ag_prealloc_blocks; /* reserved ag blocks */
uint m_alloc_set_aside; /* space we can't use */
uint m_ag_max_usable; /* max space per AG */
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
int m_dalign; /* stripe unit */
int m_swidth; /* stripe width */
xfs_agnumber_t m_maxagi; /* highest inode alloc group */
uint m_allocsize_log;/* min write size log bytes */
uint m_allocsize_blocks; /* min write size blocks */
int m_logbufs; /* number of log buffers */
int m_logbsize; /* size of each log buffer */
uint m_rsumlevels; /* rt summary levels */
uint m_rsumsize; /* size of rt summary, bytes */
int m_fixedfsid[2]; /* unchanged for life of FS */
uint m_qflags; /* quota status flags */
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
uint64_t m_flags; /* global mount flags */
int64_t m_low_space[XFS_LOWSP_MAX];
struct xfs_ino_geometry m_ino_geo; /* inode geometry */
struct xfs_trans_resv m_resv; /* precomputed res values */
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
/* low free space thresholds */
bool m_always_cow;
bool m_fail_unmount;
bool m_finobt_nores; /* no per-AG finobt resv. */
bool m_update_sb; /* sb needs update in mount */
/*
* Bitsets of per-fs metadata that have been checked and/or are sick.
* Callers must hold m_sb_lock to access these two fields.
*/
uint8_t m_fs_checked;
uint8_t m_fs_sick;
/*
* Bitsets of rt metadata that have been checked and/or are sick.
* Callers must hold m_sb_lock to access this field.
*/
uint8_t m_rt_checked;
uint8_t m_rt_sick;
/*
* End of read-mostly variables. Frequently written variables and locks
* should be placed below this comment from now on. The first variable
* here is marked as cacheline aligned so they it is separated from
* the read-mostly variables.
*/
spinlock_t ____cacheline_aligned m_sb_lock; /* sb counter lock */
struct percpu_counter m_icount; /* allocated inodes counter */
struct percpu_counter m_ifree; /* free inodes counter */
struct percpu_counter m_fdblocks; /* free block counter */
/*
* Count of data device blocks reserved for delayed allocations,
* including indlen blocks. Does not include allocated CoW staging
* extents or anything related to the rt device.
*/
struct percpu_counter m_delalloc_blks;
struct radix_tree_root m_perag_tree; /* per-ag accounting info */
spinlock_t m_perag_lock; /* lock for m_perag_tree */
uint64_t m_resblks; /* total reserved blocks */
uint64_t m_resblks_avail;/* available reserved blocks */
uint64_t m_resblks_save; /* reserved blks @ remount,ro */
xfs: introduce background inode reclaim work Background inode reclaim needs to run more frequently that the XFS syncd work is run as 30s is too long between optimal reclaim runs. Add a new periodic work item to the xfs syncd workqueue to run a fast, non-blocking inode reclaim scan. Background inode reclaim is kicked by the act of marking inodes for reclaim. When an AG is first marked as having reclaimable inodes, the background reclaim work is kicked. It will continue to run periodically untill it detects that there are no more reclaimable inodes. It will be kicked again when the first inode is queued for reclaim. To ensure shrinker based inode reclaim throttles to the inode cleaning and reclaim rate but still reclaim inodes efficiently, make it kick the background inode reclaim so that when we are low on memory we are trying to reclaim inodes as efficiently as possible. This kick shoul d not be necessary, but it will protect against failures to kick the background reclaim when inodes are first dirtied. To provide the rate throttling, make the shrinker pass do synchronous inode reclaim so that it blocks on inodes under IO. This means that the shrinker will reclaim inodes rather than just skipping over them, but it does not adversely affect the rate of reclaim because most dirty inodes are already under IO due to the background reclaim work the shrinker kicked. These two modifications solve one of the two OOM killer invocations Chris Mason reported recently when running a stress testing script. The particular workload trigger for the OOM killer invocation is where there are more threads than CPUs all unlinking files in an extremely memory constrained environment. Unlike other solutions, this one does not have a performance impact on performance when memory is not constrained or the number of concurrent threads operating is <= to the number of CPUs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-04-08 10:45:07 +08:00
struct delayed_work m_reclaim_work; /* background inode reclaim */
struct xfs_kobj m_kobj;
struct xfs_kobj m_error_kobj;
struct xfs_kobj m_error_meta_kobj;
struct xfs_error_cfg m_error_cfg[XFS_ERR_CLASS_MAX][XFS_ERR_ERRNO_MAX];
struct xstats m_stats; /* per-fs stats */
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
xfs_agnumber_t m_agfrotor; /* last ag where space found */
xfs_agnumber_t m_agirotor; /* last ag dir inode alloced */
spinlock_t m_agirotor_lock;/* .. and lock protecting it */
/*
* Workqueue item so that we can coalesce multiple inode flush attempts
* into a single flush.
*/
struct work_struct m_flush_inodes_work;
/*
* Generation of the filesysyem layout. This is incremented by each
* growfs, and used by the pNFS server to ensure the client updates
* its view of the block device once it gets a layout that might
* reference the newly added blocks. Does not need to be persistent
* as long as we only allow file system size increments, but if we
* ever support shrinks it would have to be persisted in addition
* to various other kinds of pain inflicted on the pNFS server.
*/
uint32_t m_generation;
xfs: separate read-only variables in struct xfs_mount Seeing massive cpu usage from xfs_agino_range() on one machine; instruction level profiles look similar to another machine running the same workload, only one machine is consuming 10x as much CPU as the other and going much slower. The only real difference between the two machines is core count per socket. Both are running identical 16p/16GB virtual machine configurations Machine A: 25.83% [k] xfs_agino_range 12.68% [k] __xfs_dir3_data_check 6.95% [k] xfs_verify_ino 6.78% [k] xfs_dir2_data_entry_tag_p 3.56% [k] xfs_buf_find 2.31% [k] xfs_verify_dir_ino 2.02% [k] xfs_dabuf_map.constprop.0 1.65% [k] xfs_ag_block_count And takes around 13 minutes to remove 50 million inodes. Machine B: 13.90% [k] __pv_queued_spin_lock_slowpath 3.76% [k] do_raw_spin_lock 2.83% [k] xfs_dir3_leaf_check_int 2.75% [k] xfs_agino_range 2.51% [k] __raw_callee_save___pv_queued_spin_unlock 2.18% [k] __xfs_dir3_data_check 2.02% [k] xfs_log_commit_cil And takes around 5m30s to remove 50 million inodes. Suspect is cacheline contention on m_sectbb_log which is used in one of the macros in xfs_agino_range. This is a read-only variable but shares a cacheline with m_active_trans which is a global atomic that gets bounced all around the machine. The workload is trying to run hundreds of thousands of transactions per second and hence cacheline contention will be occurring on this atomic counter. Hence xfs_agino_range() is likely just be an innocent bystander as the cache coherency protocol fights over the cacheline between CPU cores and sockets. On machine A, this rearrangement of the struct xfs_mount results in the profile changing to: 9.77% [kernel] [k] xfs_agino_range 6.27% [kernel] [k] __xfs_dir3_data_check 5.31% [kernel] [k] __pv_queued_spin_lock_slowpath 4.54% [kernel] [k] xfs_buf_find 3.79% [kernel] [k] do_raw_spin_lock 3.39% [kernel] [k] xfs_verify_ino 2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock Vastly less CPU usage in xfs_agino_range(), but still 3x the amount of machine B and still runs substantially slower than it should. Current rm -rf of 50 million files: vanilla patched machine A 13m20s 6m42s machine B 5m30s 5m02s It's an improvement, hence indicating that separation and further optimisation of read-only global filesystem data is worthwhile, but it clearly isn't the underlying issue causing this specific performance degradation. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-05-21 04:17:11 +08:00
struct mutex m_growlock; /* growfs mutex */
#ifdef DEBUG
/*
* Frequency with which errors are injected. Replaces xfs_etest; the
* value stored in here is the inverse of the frequency with which the
* error triggers. 1 = always, 2 = half the time, etc.
*/
unsigned int *m_errortag;
struct xfs_kobj m_errortag_kobj;
#endif
} xfs_mount_t;
#define M_IGEO(mp) (&(mp)->m_ino_geo)
/*
* Flags for m_flags.
*/
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
#define XFS_MOUNT_WSYNC (1ULL << 0) /* for nfs - all metadata ops
must be synchronous except
for space allocations */
#define XFS_MOUNT_UNMOUNTING (1ULL << 1) /* filesystem is unmounting */
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
#define XFS_MOUNT_WAS_CLEAN (1ULL << 3)
#define XFS_MOUNT_FS_SHUTDOWN (1ULL << 4) /* atomic stop of all filesystem
operations, typically for
disk errors in metadata */
#define XFS_MOUNT_DISCARD (1ULL << 5) /* discard unused blocks */
#define XFS_MOUNT_NOALIGN (1ULL << 7) /* turn off stripe alignment
allocations */
#define XFS_MOUNT_ATTR2 (1ULL << 8) /* allow use of attr2 format */
#define XFS_MOUNT_GRPID (1ULL << 9) /* group-ID assigned from directory */
#define XFS_MOUNT_NORECOVERY (1ULL << 10) /* no recovery - dirty fs */
#define XFS_MOUNT_ALLOCSIZE (1ULL << 12) /* specified allocation size */
#define XFS_MOUNT_SMALL_INUMS (1ULL << 14) /* user wants 32bit inodes */
#define XFS_MOUNT_32BITINODES (1ULL << 15) /* inode32 allocator active */
#define XFS_MOUNT_NOUUID (1ULL << 16) /* ignore uuid during mount */
#define XFS_MOUNT_IKEEP (1ULL << 18) /* keep empty inode clusters*/
#define XFS_MOUNT_SWALLOC (1ULL << 19) /* turn on stripe width
* allocation */
#define XFS_MOUNT_RDONLY (1ULL << 20) /* read-only fs */
#define XFS_MOUNT_DIRSYNC (1ULL << 21) /* synchronous directory ops */
#define XFS_MOUNT_LARGEIO (1ULL << 22) /* report large preferred
* I/O size in stat() */
[XFS] Concurrent Multi-File Data Streams In media spaces, video is often stored in a frame-per-file format. When dealing with uncompressed realtime HD video streams in this format, it is crucial that files do not get fragmented and that multiple files a placed contiguously on disk. When multiple streams are being ingested and played out at the same time, it is critical that the filesystem does not cross the streams and interleave them together as this creates seek and readahead cache miss latency and prevents both ingest and playout from meeting frame rate targets. This patch set creates a "stream of files" concept into the allocator to place all the data from a single stream contiguously on disk so that RAID array readahead can be used effectively. Each additional stream gets placed in different allocation groups within the filesystem, thereby ensuring that we don't cross any streams. When an AG fills up, we select a new AG for the stream that is not in use. The core of the functionality is the stream tracking - each inode that we create in a directory needs to be associated with the directories' stream. Hence every time we create a file, we look up the directories' stream object and associate the new file with that object. Once we have a stream object for a file, we use the AG that the stream object point to for allocations. If we can't allocate in that AG (e.g. it is full) we move the entire stream to another AG. Other inodes in the same stream are moved to the new AG on their next allocation (i.e. lazy update). Stream objects are kept in a cache and hold a reference on the inode. Hence the inode cannot be reclaimed while there is an outstanding stream reference. This means that on unlink we need to remove the stream association and we also need to flush all the associations on certain events that want to reclaim all unreferenced inodes (e.g. filesystem freeze). SGI-PV: 964469 SGI-Modid: xfs-linux-melb:xfs-kern:29096a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Barry Naujok <bnaujok@sgi.com> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-11 09:09:12 +08:00
#define XFS_MOUNT_FILESTREAMS (1ULL << 24) /* enable the filestreams
allocator */
#define XFS_MOUNT_NOATTR2 (1ULL << 25) /* disable use of attr2 format */
#define XFS_MOUNT_DAX_ALWAYS (1ULL << 26)
#define XFS_MOUNT_DAX_NEVER (1ULL << 27)
/*
* Max and min values for mount-option defined I/O
* preallocation sizes.
*/
#define XFS_MAX_IO_LOG 30 /* 1G */
#define XFS_MIN_IO_LOG PAGE_SHIFT
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
#define XFS_LAST_UNMOUNT_WAS_CLEAN(mp) \
((mp)->m_flags & XFS_MOUNT_WAS_CLEAN)
#define XFS_FORCED_SHUTDOWN(mp) ((mp)->m_flags & XFS_MOUNT_FS_SHUTDOWN)
void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
int lnnum);
#define xfs_force_shutdown(m,f) \
xfs_do_force_shutdown(m, f, __FILE__, __LINE__)
#define SHUTDOWN_META_IO_ERROR 0x0001 /* write attempt to metadata failed */
#define SHUTDOWN_LOG_IO_ERROR 0x0002 /* write attempt to the log failed */
#define SHUTDOWN_FORCE_UMOUNT 0x0004 /* shutdown from a forced unmount */
#define SHUTDOWN_CORRUPT_INCORE 0x0008 /* corrupt in-memory data structures */
/*
* Flags for xfs_mountfs
*/
#define XFS_MFSI_QUIET 0x40 /* Be silent if mount errors found */
static inline xfs_agnumber_t
xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d)
{
xfs_rfsblock_t ld = XFS_BB_TO_FSBT(mp, d);
do_div(ld, mp->m_sb.sb_agblocks);
return (xfs_agnumber_t) ld;
}
static inline xfs_agblock_t
xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d)
{
xfs_rfsblock_t ld = XFS_BB_TO_FSBT(mp, d);
return (xfs_agblock_t) do_div(ld, mp->m_sb.sb_agblocks);
}
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
/* per-AG block reservation data structures*/
struct xfs_ag_resv {
/* number of blocks originally reserved here */
xfs_extlen_t ar_orig_reserved;
/* number of blocks reserved here */
xfs_extlen_t ar_reserved;
/* number of blocks originally asked for */
xfs_extlen_t ar_asked;
};
/*
* Per-ag incore structure, copies of information in agf and agi, to improve the
* performance of allocation group selection.
*/
typedef struct xfs_perag {
struct xfs_mount *pag_mount; /* owner filesystem */
xfs_agnumber_t pag_agno; /* AG this structure belongs to */
atomic_t pag_ref; /* perag reference count */
char pagf_init; /* this agf's entry is initialized */
char pagi_init; /* this agi's entry is initialized */
char pagf_metadata; /* the agf is preferred to be metadata */
char pagi_inodeok; /* The agi is ok for inodes */
uint8_t pagf_levels[XFS_BTNUM_AGF];
/* # of levels in bno & cnt btree */
xfs: detect agfl count corruption and reset agfl The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d52bcb ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-16 01:51:58 +08:00
bool pagf_agflreset; /* agfl requires reset before use */
uint32_t pagf_flcount; /* count of blocks in freelist */
xfs_extlen_t pagf_freeblks; /* total free blocks */
xfs_extlen_t pagf_longest; /* longest free space */
uint32_t pagf_btreeblks; /* # of blocks held in AGF btrees */
xfs_agino_t pagi_freecount; /* number of free inodes */
xfs_agino_t pagi_count; /* number of allocated inodes */
/*
* Inode allocation search lookup optimisation.
* If the pagino matches, the search for new inodes
* doesn't need to search the near ones again straight away
*/
xfs_agino_t pagl_pagino;
xfs_agino_t pagl_leftrec;
xfs_agino_t pagl_rightrec;
/*
* Bitsets of per-ag metadata that have been checked and/or are sick.
* Callers should hold pag_state_lock before accessing this field.
*/
uint16_t pag_checked;
uint16_t pag_sick;
spinlock_t pag_state_lock;
spinlock_t pagb_lock; /* lock for pagb_tree */
struct rb_root pagb_tree; /* ordered tree of busy extents */
unsigned int pagb_gen; /* generation count for pagb_tree */
wait_queue_head_t pagb_wait; /* woken when pagb_gen changes */
atomic_t pagf_fstrms; /* # of filestreams active in this AG */
spinlock_t pag_ici_lock; /* incore inode cache lock */
struct radix_tree_root pag_ici_root; /* incore inode cache root */
int pag_ici_reclaimable; /* reclaimable inodes */
unsigned long pag_ici_reclaim_cursor; /* reclaim restart point */
/* buffer cache index */
spinlock_t pag_buf_lock; /* lock for pag_buf_hash */
struct rhashtable pag_buf_hash;
/* for rcu-safe freeing */
struct rcu_head rcu_head;
int pagb_count; /* pagb slots in use */
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
/* Blocks reserved for all kinds of metadata. */
struct xfs_ag_resv pag_meta_resv;
/* Blocks reserved for the reverse mapping btree. */
struct xfs_ag_resv pag_rmapbt_resv;
/* background prealloc block trimming */
struct delayed_work pag_blockgc_work;
/* reference count */
uint8_t pagf_refcount_level;
/*
* Unlinked inode information. This incore information reflects
* data stored in the AGI, so callers must hold the AGI buffer lock
* or have some other means to control concurrency.
*/
struct rhashtable pagi_unlinked_hash;
} xfs_perag_t;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
static inline struct xfs_ag_resv *
xfs_perag_resv(
struct xfs_perag *pag,
enum xfs_ag_resv_type type)
{
switch (type) {
case XFS_AG_RESV_METADATA:
return &pag->pag_meta_resv;
case XFS_AG_RESV_RMAPBT:
return &pag->pag_rmapbt_resv;
xfs: set up per-AG free space reservations One unfortunate quirk of the reference count and reverse mapping btrees -- they can expand in size when blocks are written to *other* allocation groups if, say, one large extent becomes a lot of tiny extents. Since we don't want to start throwing errors in the middle of CoWing, we need to reserve some blocks to handle future expansion. The transaction block reservation counters aren't sufficient here because we have to have a reserve of blocks in every AG, not just somewhere in the filesystem. Therefore, create two per-AG block reservation pools. One feeds the AGFL so that rmapbt expansion always succeeds, and the other feeds all other metadata so that refcountbt expansion never fails. Use the count of how many reserved blocks we need to have on hand to create a virtual reservation in the AG. Through selective clamping of the maximum length of allocation requests and of the length of the longest free extent, we can make it look like there's less free space in the AG unless the reservation owner is asking for blocks. In other words, play some accounting tricks in-core to make sure that we always have blocks available. On the plus side, there's nothing to clean up if we crash, which is contrast to the strategy that the rough draft used (actually removing extents from the freespace btrees). Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-19 08:30:52 +08:00
default:
return NULL;
}
}
int xfs_buf_hash_init(xfs_perag_t *pag);
void xfs_buf_hash_destroy(xfs_perag_t *pag);
extern void xfs_uuid_table_free(void);
extern uint64_t xfs_default_resblks(xfs_mount_t *mp);
extern int xfs_mountfs(xfs_mount_t *mp);
extern int xfs_initialize_perag(xfs_mount_t *mp, xfs_agnumber_t agcount,
xfs_agnumber_t *maxagi);
extern void xfs_unmountfs(xfs_mount_t *);
extern int xfs_mod_fdblocks(struct xfs_mount *mp, int64_t delta,
bool reserved);
extern int xfs_mod_frextents(struct xfs_mount *mp, int64_t delta);
extern int xfs_readsb(xfs_mount_t *, int);
extern void xfs_freesb(xfs_mount_t *);
extern bool xfs_fs_writable(struct xfs_mount *mp, int level);
extern int xfs_sb_validate_fsb_count(struct xfs_sb *, uint64_t);
extern int xfs_dev_is_read_only(struct xfs_mount *, char *);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 08:35:03 +08:00
extern void xfs_set_low_space_thresholds(struct xfs_mount *);
int xfs_zero_extent(struct xfs_inode *ip, xfs_fsblock_t start_fsb,
xfs_off_t count_fsb);
struct xfs_error_cfg * xfs_error_get_cfg(struct xfs_mount *mp,
int error_class, int error);
void xfs_force_summary_recalc(struct xfs_mount *mp);
void xfs_mod_delalloc(struct xfs_mount *mp, int64_t delta);
#endif /* __XFS_MOUNT_H__ */