linux/drivers/scsi/lpfc/lpfc_ct.c

3818 lines
107 KiB
C
Raw Normal View History

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2017-2023 Broadcom. All Rights Reserved. The term *
* Broadcom refers to Broadcom Inc. and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.broadcom.com *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
/*
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
* Fibre Channel SCSI LAN Device Driver CT support: FC Generic Services FC-GS
*/
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/utsname.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc.h"
#include "lpfc_scsi.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_version.h"
#include "lpfc_vport.h"
#include "lpfc_debugfs.h"
/* FDMI Port Speed definitions - FC-GS-7 */
#define HBA_PORTSPEED_1GFC 0x00000001 /* 1G FC */
#define HBA_PORTSPEED_2GFC 0x00000002 /* 2G FC */
#define HBA_PORTSPEED_4GFC 0x00000008 /* 4G FC */
#define HBA_PORTSPEED_10GFC 0x00000004 /* 10G FC */
#define HBA_PORTSPEED_8GFC 0x00000010 /* 8G FC */
#define HBA_PORTSPEED_16GFC 0x00000020 /* 16G FC */
#define HBA_PORTSPEED_32GFC 0x00000040 /* 32G FC */
#define HBA_PORTSPEED_20GFC 0x00000080 /* 20G FC */
#define HBA_PORTSPEED_40GFC 0x00000100 /* 40G FC */
#define HBA_PORTSPEED_128GFC 0x00000200 /* 128G FC */
#define HBA_PORTSPEED_64GFC 0x00000400 /* 64G FC */
#define HBA_PORTSPEED_256GFC 0x00000800 /* 256G FC */
#define HBA_PORTSPEED_UNKNOWN 0x00008000 /* Unknown */
#define HBA_PORTSPEED_10GE 0x00010000 /* 10G E */
#define HBA_PORTSPEED_40GE 0x00020000 /* 40G E */
#define HBA_PORTSPEED_100GE 0x00040000 /* 100G E */
#define HBA_PORTSPEED_25GE 0x00080000 /* 25G E */
#define HBA_PORTSPEED_50GE 0x00100000 /* 50G E */
#define HBA_PORTSPEED_400GE 0x00200000 /* 400G E */
#define FOURBYTES 4
static char *lpfc_release_version = LPFC_DRIVER_VERSION;
static void
lpfc_cmpl_ct_cmd_vmid(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb);
static void
lpfc_ct_ignore_hbq_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
struct lpfc_dmabuf *mp, uint32_t size)
{
if (!mp) {
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
"0146 Ignoring unsolicited CT No HBQ "
"status = x%x\n",
get_job_ulpstatus(phba, piocbq));
}
lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
"0145 Ignoring unsolicited CT HBQ Size:%d "
"status = x%x\n",
size, get_job_ulpstatus(phba, piocbq));
}
static void
lpfc_ct_unsol_buffer(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
struct lpfc_dmabuf *mp, uint32_t size)
{
lpfc_ct_ignore_hbq_buffer(phba, piocbq, mp, size);
}
/**
* lpfc_ct_unsol_cmpl : Completion callback function for unsol ct commands
* @phba : pointer to lpfc hba data structure.
* @cmdiocb : pointer to lpfc command iocb data structure.
* @rspiocb : pointer to lpfc response iocb data structure.
*
* This routine is the callback function for issuing unsol ct reject command.
* The memory allocated in the reject command path is freed up here.
**/
static void
lpfc_ct_unsol_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_nodelist *ndlp;
struct lpfc_dmabuf *mp, *bmp;
ndlp = cmdiocb->ndlp;
if (ndlp)
lpfc_nlp_put(ndlp);
mp = cmdiocb->rsp_dmabuf;
bmp = cmdiocb->bpl_dmabuf;
if (mp) {
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
cmdiocb->rsp_dmabuf = NULL;
}
if (bmp) {
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
kfree(bmp);
cmdiocb->bpl_dmabuf = NULL;
}
lpfc_sli_release_iocbq(phba, cmdiocb);
}
/**
* lpfc_ct_reject_event - Issue reject for unhandled CT MIB commands
* @ndlp: pointer to a node-list data structure.
* @ct_req: pointer to the CT request data structure.
* @ulp_context: context of received UNSOL CT command
* @ox_id: ox_id of the UNSOL CT command
*
* This routine is invoked by the lpfc_ct_handle_mibreq routine for sending
* a reject response. Reject response is sent for the unhandled commands.
**/
static void
lpfc_ct_reject_event(struct lpfc_nodelist *ndlp,
struct lpfc_sli_ct_request *ct_req,
u16 ulp_context, u16 ox_id)
{
struct lpfc_vport *vport = ndlp->vport;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli_ct_request *ct_rsp;
struct lpfc_iocbq *cmdiocbq = NULL;
struct lpfc_dmabuf *bmp = NULL;
struct lpfc_dmabuf *mp = NULL;
struct ulp_bde64 *bpl;
u8 rc = 0;
u32 tmo;
/* fill in BDEs for command */
mp = kmalloc(sizeof(*mp), GFP_KERNEL);
if (!mp) {
rc = 1;
goto ct_exit;
}
mp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &mp->phys);
if (!mp->virt) {
rc = 2;
goto ct_free_mp;
}
/* Allocate buffer for Buffer ptr list */
bmp = kmalloc(sizeof(*bmp), GFP_KERNEL);
if (!bmp) {
rc = 3;
goto ct_free_mpvirt;
}
bmp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &bmp->phys);
if (!bmp->virt) {
rc = 4;
goto ct_free_bmp;
}
INIT_LIST_HEAD(&mp->list);
INIT_LIST_HEAD(&bmp->list);
bpl = (struct ulp_bde64 *)bmp->virt;
memset(bpl, 0, sizeof(struct ulp_bde64));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys));
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys));
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
bpl->tus.f.bdeSize = (LPFC_CT_PREAMBLE - 4);
bpl->tus.w = le32_to_cpu(bpl->tus.w);
ct_rsp = (struct lpfc_sli_ct_request *)mp->virt;
memset(ct_rsp, 0, sizeof(struct lpfc_sli_ct_request));
ct_rsp->RevisionId.bits.Revision = SLI_CT_REVISION;
ct_rsp->RevisionId.bits.InId = 0;
ct_rsp->FsType = ct_req->FsType;
ct_rsp->FsSubType = ct_req->FsSubType;
ct_rsp->CommandResponse.bits.Size = 0;
ct_rsp->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CT_RESPONSE_FS_RJT);
ct_rsp->ReasonCode = SLI_CT_REQ_NOT_SUPPORTED;
ct_rsp->Explanation = SLI_CT_NO_ADDITIONAL_EXPL;
cmdiocbq = lpfc_sli_get_iocbq(phba);
if (!cmdiocbq) {
rc = 5;
goto ct_free_bmpvirt;
}
if (phba->sli_rev == LPFC_SLI_REV4) {
lpfc_sli_prep_xmit_seq64(phba, cmdiocbq, bmp,
phba->sli4_hba.rpi_ids[ndlp->nlp_rpi],
ox_id, 1, FC_RCTL_DD_SOL_CTL, 1,
CMD_XMIT_SEQUENCE64_WQE);
} else {
lpfc_sli_prep_xmit_seq64(phba, cmdiocbq, bmp, 0, ulp_context, 1,
FC_RCTL_DD_SOL_CTL, 1,
CMD_XMIT_SEQUENCE64_CX);
}
/* Save for completion so we can release these resources */
cmdiocbq->rsp_dmabuf = mp;
cmdiocbq->bpl_dmabuf = bmp;
2022-02-25 10:22:52 +08:00
cmdiocbq->cmd_cmpl = lpfc_ct_unsol_cmpl;
tmo = (3 * phba->fc_ratov);
cmdiocbq->retry = 0;
cmdiocbq->vport = vport;
cmdiocbq->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
cmdiocbq->ndlp = lpfc_nlp_get(ndlp);
if (!cmdiocbq->ndlp)
goto ct_no_ndlp;
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, 0);
if (rc) {
lpfc_nlp_put(ndlp);
goto ct_no_ndlp;
}
return;
ct_no_ndlp:
rc = 6;
lpfc_sli_release_iocbq(phba, cmdiocbq);
ct_free_bmpvirt:
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
ct_free_bmp:
kfree(bmp);
ct_free_mpvirt:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
ct_free_mp:
kfree(mp);
ct_exit:
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"6440 Unsol CT: Rsp err %d Data: x%x\n",
rc, vport->fc_flag);
}
/**
* lpfc_ct_handle_mibreq - Process an unsolicited CT MIB request data buffer
* @phba: pointer to lpfc hba data structure.
* @ctiocbq: pointer to lpfc CT command iocb data structure.
*
* This routine is used for processing the IOCB associated with a unsolicited
* CT MIB request. It first determines whether there is an existing ndlp that
* matches the DID from the unsolicited IOCB. If not, it will return.
**/
static void
lpfc_ct_handle_mibreq(struct lpfc_hba *phba, struct lpfc_iocbq *ctiocbq)
{
struct lpfc_sli_ct_request *ct_req;
struct lpfc_nodelist *ndlp = NULL;
struct lpfc_vport *vport = ctiocbq->vport;
u32 ulp_status = get_job_ulpstatus(phba, ctiocbq);
u32 ulp_word4 = get_job_word4(phba, ctiocbq);
u32 did;
u16 mi_cmd;
did = bf_get(els_rsp64_sid, &ctiocbq->wqe.xmit_els_rsp);
if (ulp_status) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"6438 Unsol CT: status:x%x/x%x did : x%x\n",
ulp_status, ulp_word4, did);
return;
}
/* Ignore traffic received during vport shutdown */
if (vport->fc_flag & FC_UNLOADING)
return;
ndlp = lpfc_findnode_did(vport, did);
if (!ndlp) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"6439 Unsol CT: NDLP Not Found for DID : x%x",
did);
return;
}
ct_req = (struct lpfc_sli_ct_request *)ctiocbq->cmd_dmabuf->virt;
mi_cmd = be16_to_cpu(ct_req->CommandResponse.bits.CmdRsp);
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"6442 : MI Cmd : x%x Not Supported\n", mi_cmd);
lpfc_ct_reject_event(ndlp, ct_req,
bf_get(wqe_ctxt_tag,
&ctiocbq->wqe.xmit_els_rsp.wqe_com),
bf_get(wqe_rcvoxid,
&ctiocbq->wqe.xmit_els_rsp.wqe_com));
}
/**
* lpfc_ct_unsol_event - Process an unsolicited event from a ct sli ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @ctiocbq: pointer to lpfc ct iocb data structure.
*
* This routine is used to process an unsolicited event received from a SLI
* (Service Level Interface) ring. The actual processing of the data buffer
* associated with the unsolicited event is done by invoking appropriate routine
* after properly set up the iocb buffer from the SLI ring on which the
* unsolicited event was received.
**/
void
lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *ctiocbq)
{
struct lpfc_dmabuf *mp = NULL;
IOCB_t *icmd = &ctiocbq->iocb;
int i;
struct lpfc_iocbq *iocbq;
struct lpfc_iocbq *iocb;
dma_addr_t dma_addr;
uint32_t size;
struct list_head head;
struct lpfc_sli_ct_request *ct_req;
struct lpfc_dmabuf *bdeBuf1 = ctiocbq->cmd_dmabuf;
struct lpfc_dmabuf *bdeBuf2 = ctiocbq->bpl_dmabuf;
u32 status, parameter, bde_count = 0;
struct lpfc_wcqe_complete *wcqe_cmpl = NULL;
ctiocbq->cmd_dmabuf = NULL;
ctiocbq->rsp_dmabuf = NULL;
ctiocbq->bpl_dmabuf = NULL;
wcqe_cmpl = &ctiocbq->wcqe_cmpl;
status = get_job_ulpstatus(phba, ctiocbq);
parameter = get_job_word4(phba, ctiocbq);
if (phba->sli_rev == LPFC_SLI_REV4)
bde_count = wcqe_cmpl->word3;
else
bde_count = icmd->ulpBdeCount;
if (unlikely(status == IOSTAT_NEED_BUFFER)) {
lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
} else if ((status == IOSTAT_LOCAL_REJECT) &&
((parameter & IOERR_PARAM_MASK) ==
IOERR_RCV_BUFFER_WAITING)) {
/* Not enough posted buffers; Try posting more buffers */
phba->fc_stat.NoRcvBuf++;
if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED))
2022-02-25 10:22:52 +08:00
lpfc_sli3_post_buffer(phba, pring, 2);
return;
}
/* If there are no BDEs associated
* with this IOCB, there is nothing to do.
*/
if (bde_count == 0)
return;
ctiocbq->cmd_dmabuf = bdeBuf1;
if (bde_count == 2)
ctiocbq->bpl_dmabuf = bdeBuf2;
ct_req = (struct lpfc_sli_ct_request *)ctiocbq->cmd_dmabuf->virt;
if (ct_req->FsType == SLI_CT_MANAGEMENT_SERVICE &&
ct_req->FsSubType == SLI_CT_MIB_Subtypes) {
lpfc_ct_handle_mibreq(phba, ctiocbq);
} else {
if (!lpfc_bsg_ct_unsol_event(phba, pring, ctiocbq))
return;
}
if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) {
INIT_LIST_HEAD(&head);
list_add_tail(&head, &ctiocbq->list);
list_for_each_entry(iocb, &head, list) {
if (phba->sli_rev == LPFC_SLI_REV4)
bde_count = iocb->wcqe_cmpl.word3;
else
bde_count = iocb->iocb.ulpBdeCount;
if (!bde_count)
continue;
bdeBuf1 = iocb->cmd_dmabuf;
iocb->cmd_dmabuf = NULL;
if (phba->sli_rev == LPFC_SLI_REV4)
size = iocb->wqe.gen_req.bde.tus.f.bdeSize;
else
size = iocb->iocb.un.cont64[0].tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, ctiocbq, bdeBuf1, size);
lpfc_in_buf_free(phba, bdeBuf1);
if (bde_count == 2) {
bdeBuf2 = iocb->bpl_dmabuf;
iocb->bpl_dmabuf = NULL;
if (phba->sli_rev == LPFC_SLI_REV4)
size = iocb->unsol_rcv_len;
else
size = iocb->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, ctiocbq, bdeBuf2,
size);
lpfc_in_buf_free(phba, bdeBuf2);
}
}
list_del(&head);
} else {
INIT_LIST_HEAD(&head);
list_add_tail(&head, &ctiocbq->list);
list_for_each_entry(iocbq, &head, list) {
icmd = &iocbq->iocb;
if (icmd->ulpBdeCount == 0)
lpfc_ct_unsol_buffer(phba, iocbq, NULL, 0);
for (i = 0; i < icmd->ulpBdeCount; i++) {
dma_addr = getPaddr(icmd->un.cont64[i].addrHigh,
icmd->un.cont64[i].addrLow);
mp = lpfc_sli_ringpostbuf_get(phba, pring,
dma_addr);
size = icmd->un.cont64[i].tus.f.bdeSize;
lpfc_ct_unsol_buffer(phba, iocbq, mp, size);
lpfc_in_buf_free(phba, mp);
}
2022-02-25 10:22:52 +08:00
lpfc_sli3_post_buffer(phba, pring, i);
}
list_del(&head);
}
}
/**
* lpfc_ct_handle_unsol_abort - ct upper level protocol abort handler
* @phba: Pointer to HBA context object.
* @dmabuf: pointer to a dmabuf that describes the FC sequence
*
* This function serves as the upper level protocol abort handler for CT
* protocol.
*
* Return 1 if abort has been handled, 0 otherwise.
**/
int
lpfc_ct_handle_unsol_abort(struct lpfc_hba *phba, struct hbq_dmabuf *dmabuf)
{
int handled;
/* CT upper level goes through BSG */
handled = lpfc_bsg_ct_unsol_abort(phba, dmabuf);
return handled;
}
static void
lpfc_free_ct_rsp(struct lpfc_hba *phba, struct lpfc_dmabuf *mlist)
{
struct lpfc_dmabuf *mlast, *next_mlast;
list_for_each_entry_safe(mlast, next_mlast, &mlist->list, list) {
list_del(&mlast->list);
lpfc_mbuf_free(phba, mlast->virt, mlast->phys);
kfree(mlast);
}
lpfc_mbuf_free(phba, mlist->virt, mlist->phys);
kfree(mlist);
return;
}
static struct lpfc_dmabuf *
lpfc_alloc_ct_rsp(struct lpfc_hba *phba, __be16 cmdcode, struct ulp_bde64 *bpl,
uint32_t size, int *entries)
{
struct lpfc_dmabuf *mlist = NULL;
struct lpfc_dmabuf *mp;
int cnt, i = 0;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
/* We get chunks of FCELSSIZE */
cnt = size > FCELSSIZE ? FCELSSIZE: size;
while (size) {
/* Allocate buffer for rsp payload */
mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
if (mlist)
lpfc_free_ct_rsp(phba, mlist);
return NULL;
}
INIT_LIST_HEAD(&mp->list);
if (be16_to_cpu(cmdcode) == SLI_CTNS_GID_FT ||
be16_to_cpu(cmdcode) == SLI_CTNS_GFF_ID)
mp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(mp->phys));
else
mp->virt = lpfc_mbuf_alloc(phba, 0, &(mp->phys));
if (!mp->virt) {
kfree(mp);
if (mlist)
lpfc_free_ct_rsp(phba, mlist);
return NULL;
}
/* Queue it to a linked list */
if (!mlist)
mlist = mp;
else
list_add_tail(&mp->list, &mlist->list);
bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I;
/* build buffer ptr list for IOCB */
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
bpl->tus.f.bdeSize = (uint16_t) cnt;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
bpl++;
i++;
size -= cnt;
}
*entries = i;
return mlist;
}
int
lpfc_ct_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *ctiocb)
{
struct lpfc_dmabuf *buf_ptr;
/* IOCBQ job structure gets cleaned during release. Just release
* the dma buffers here.
*/
if (ctiocb->cmd_dmabuf) {
buf_ptr = ctiocb->cmd_dmabuf;
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
kfree(buf_ptr);
ctiocb->cmd_dmabuf = NULL;
}
if (ctiocb->rsp_dmabuf) {
lpfc_free_ct_rsp(phba, ctiocb->rsp_dmabuf);
ctiocb->rsp_dmabuf = NULL;
}
if (ctiocb->bpl_dmabuf) {
buf_ptr = ctiocb->bpl_dmabuf;
lpfc_mbuf_free(phba, buf_ptr->virt, buf_ptr->phys);
kfree(buf_ptr);
ctiocb->bpl_dmabuf = NULL;
}
lpfc_sli_release_iocbq(phba, ctiocb);
return 0;
}
scsi: lpfc: Fix-up formatting/docrot where appropriate Other headers have been demoted as they are too far out of sync and ideally require effort from the authors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'usr_flg' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'num_entry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'tmo' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'retry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'rsp_size' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'retry' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'cmdcode' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'new_mask' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3272: warning: Function parameter or member 't' not described in 'lpfc_delayed_disc_tmo' Link: https://lore.kernel.org/r/20200721164148.2617584-31-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-22 00:41:38 +08:00
/*
* lpfc_gen_req - Build and issue a GEN_REQUEST command to the SLI Layer
* @vport: pointer to a host virtual N_Port data structure.
* @bmp: Pointer to BPL for SLI command
* @inp: Pointer to data buffer for response data.
* @outp: Pointer to data buffer that hold the CT command.
* @cmpl: completion routine to call when command completes
* @ndlp: Destination NPort nodelist entry
*
* This function as the final part for issuing a CT command.
*/
static int
lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
struct lpfc_dmabuf *inp, struct lpfc_dmabuf *outp,
void (*cmpl)(struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *),
struct lpfc_nodelist *ndlp, uint32_t event_tag, uint32_t num_entry,
uint32_t tmo, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *geniocb;
int rc;
u16 ulp_context;
/* Allocate buffer for command iocb */
geniocb = lpfc_sli_get_iocbq(phba);
if (geniocb == NULL)
return 1;
/* Update the num_entry bde count */
geniocb->num_bdes = num_entry;
geniocb->bpl_dmabuf = bmp;
/* Save for completion so we can release these resources */
geniocb->cmd_dmabuf = inp;
geniocb->rsp_dmabuf = outp;
geniocb->event_tag = event_tag;
if (!tmo) {
/* FC spec states we need 3 * ratov for CT requests */
tmo = (3 * phba->fc_ratov);
}
if (phba->sli_rev == LPFC_SLI_REV4)
ulp_context = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi];
else
ulp_context = ndlp->nlp_rpi;
lpfc_sli_prep_gen_req(phba, geniocb, bmp, ulp_context, num_entry, tmo);
/* Issue GEN REQ IOCB for NPORT <did> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0119 Issue GEN REQ IOCB to NPORT x%x "
"Data: x%x x%x\n",
ndlp->nlp_DID, geniocb->iotag,
vport->port_state);
2022-02-25 10:22:52 +08:00
geniocb->cmd_cmpl = cmpl;
geniocb->drvrTimeout = tmo + LPFC_DRVR_TIMEOUT;
geniocb->vport = vport;
geniocb->retry = retry;
geniocb->ndlp = lpfc_nlp_get(ndlp);
if (!geniocb->ndlp)
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
goto out;
rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
if (rc == IOCB_ERROR) {
lpfc_nlp_put(ndlp);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
goto out;
}
return 0;
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
out:
lpfc_sli_release_iocbq(phba, geniocb);
return 1;
}
scsi: lpfc: Fix-up formatting/docrot where appropriate Other headers have been demoted as they are too far out of sync and ideally require effort from the authors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'usr_flg' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'num_entry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'tmo' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'retry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'rsp_size' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'retry' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'cmdcode' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'new_mask' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3272: warning: Function parameter or member 't' not described in 'lpfc_delayed_disc_tmo' Link: https://lore.kernel.org/r/20200721164148.2617584-31-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-22 00:41:38 +08:00
/*
* lpfc_ct_cmd - Build and issue a CT command
* @vport: pointer to a host virtual N_Port data structure.
* @inmp: Pointer to data buffer for response data.
* @bmp: Pointer to BPL for SLI command
* @ndlp: Destination NPort nodelist entry
* @cmpl: completion routine to call when command completes
*
* This function is called for issuing a CT command.
*/
static int
lpfc_ct_cmd(struct lpfc_vport *vport, struct lpfc_dmabuf *inmp,
struct lpfc_dmabuf *bmp, struct lpfc_nodelist *ndlp,
void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *),
uint32_t rsp_size, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
struct ulp_bde64 *bpl = (struct ulp_bde64 *) bmp->virt;
struct lpfc_dmabuf *outmp;
int cnt = 0, status;
__be16 cmdcode = ((struct lpfc_sli_ct_request *)inmp->virt)->
CommandResponse.bits.CmdRsp;
bpl++; /* Skip past ct request */
/* Put buffer(s) for ct rsp in bpl */
outmp = lpfc_alloc_ct_rsp(phba, cmdcode, bpl, rsp_size, &cnt);
if (!outmp)
return -ENOMEM;
/*
* Form the CT IOCB. The total number of BDEs in this IOCB
* is the single command plus response count from
* lpfc_alloc_ct_rsp.
*/
cnt += 1;
status = lpfc_gen_req(vport, bmp, inmp, outmp, cmpl, ndlp,
phba->fc_eventTag, cnt, 0, retry);
if (status) {
lpfc_free_ct_rsp(phba, outmp);
return -ENOMEM;
}
return 0;
}
struct lpfc_vport *
lpfc_find_vport_by_did(struct lpfc_hba *phba, uint32_t did) {
struct lpfc_vport *vport_curr;
unsigned long flags;
spin_lock_irqsave(&phba->port_list_lock, flags);
list_for_each_entry(vport_curr, &phba->port_list, listentry) {
if ((vport_curr->fc_myDID) && (vport_curr->fc_myDID == did)) {
spin_unlock_irqrestore(&phba->port_list_lock, flags);
return vport_curr;
}
}
spin_unlock_irqrestore(&phba->port_list_lock, flags);
return NULL;
}
static void
lpfc_prep_node_fc4type(struct lpfc_vport *vport, uint32_t Did, uint8_t fc4_type)
{
struct lpfc_nodelist *ndlp;
if ((vport->port_type != LPFC_NPIV_PORT) ||
!(vport->ct_flags & FC_CT_RFF_ID) || !vport->cfg_restrict_login) {
ndlp = lpfc_setup_disc_node(vport, Did);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (ndlp) {
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"Parse GID_FTrsp: did:x%x flg:x%x x%x",
Did, ndlp->nlp_flag, vport->fc_flag);
/* By default, the driver expects to support FCP FC4 */
if (fc4_type == FC_TYPE_FCP)
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
if (fc4_type == FC_TYPE_NVME)
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0238 Process x%06x NameServer Rsp "
"Data: x%x x%x x%x x%x x%x\n", Did,
ndlp->nlp_flag, ndlp->nlp_fc4_type,
ndlp->nlp_state, vport->fc_flag,
vport->fc_rscn_id_cnt);
/* if ndlp needs to be discovered and prior
* state of ndlp hit devloss, change state to
* allow rediscovery.
*/
if (ndlp->nlp_flag & NLP_NPR_2B_DISC &&
ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
lpfc_nlp_set_state(vport, ndlp,
NLP_STE_NPR_NODE);
}
} else {
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"Skip1 GID_FTrsp: did:x%x flg:x%x cnt:%d",
Did, vport->fc_flag, vport->fc_rscn_id_cnt);
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0239 Skip x%06x NameServer Rsp "
"Data: x%x x%x x%px\n",
scsi: lpfc: Fix loss of remote port after devloss due to lack of RPIs In tests with remote ports contantly logging out/logging coupled with occassional local link bounce, if a remote port is disocnnected for longer than devloss_tmo and then subsequently reconnected, eventually the test will fail to login with the remote port and remote port connectivity is lost. When devloss_tmo expires, the driver does not free the node struct until the port or npiv instances is being deleted. The node is left allocated but the state set to UNUSED. If the node was in the process of logging in when the local link drop occurred, meaning the RPI was allocated for the node in order to send the ELS, but not yet registered which comes after successful login, the node is moved to the NPR state, and if devloss expires, to UNUSED state. If the remote port comes back, the node associated with it is restarted and this path happens to allocate a new RPI and overwrites the prior RPI value. In the cases where the port was logged in and loggs out, the path did release the RPI but did not set the node rpi value. In the cases where the remote port never finished logging in, the path never did the call to release the rpi. In this latter case, when the node is subsequently restore, the new rpi allocation overwrites the rpi that was not released, and the rpi is now leaked. Eventually the port will run out of RPI resources to log into new remote ports. Fix by following changes: - When an rpi is released, do so under locks and ensure the node rpi value is set to a non-allocated value (LPFC_RPI_ALLOC_ERROR). Note: refactored to a small service routine to avoid indentation issues. - When re-enabling a node, check the rpi value to determine if a new allocation is necessary. If already set, use the prior rpi. Enhanced logging to help in the future. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-15 07:56:47 +08:00
Did, vport->fc_flag,
vport->fc_rscn_id_cnt, ndlp);
}
} else {
if (!(vport->fc_flag & FC_RSCN_MODE) ||
lpfc_rscn_payload_check(vport, Did)) {
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"Query GID_FTrsp: did:x%x flg:x%x cnt:%d",
Did, vport->fc_flag, vport->fc_rscn_id_cnt);
/*
* This NPortID was previously a FCP/NVMe target,
* Don't even bother to send GFF_ID.
*/
ndlp = lpfc_findnode_did(vport, Did);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (ndlp &&
(ndlp->nlp_type &
(NLP_FCP_TARGET | NLP_NVME_TARGET))) {
if (fc4_type == FC_TYPE_FCP)
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
if (fc4_type == FC_TYPE_NVME)
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
lpfc_setup_disc_node(vport, Did);
} else if (lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID,
0, Did) == 0)
vport->num_disc_nodes++;
else
lpfc_setup_disc_node(vport, Did);
} else {
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"Skip2 GID_FTrsp: did:x%x flg:x%x cnt:%d",
Did, vport->fc_flag, vport->fc_rscn_id_cnt);
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0245 Skip x%06x NameServer Rsp "
"Data: x%x x%x\n", Did,
vport->fc_flag,
vport->fc_rscn_id_cnt);
}
}
}
static void
lpfc_ns_rsp_audit_did(struct lpfc_vport *vport, uint32_t Did, uint8_t fc4_type)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
char *str;
if (phba->cfg_ns_query == LPFC_NS_QUERY_GID_FT)
str = "GID_FT";
else
str = "GID_PT";
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6430 Process %s rsp for %08x type %x %s %s\n",
str, Did, fc4_type,
(fc4_type == FC_TYPE_FCP) ? "FCP" : " ",
(fc4_type == FC_TYPE_NVME) ? "NVME" : " ");
/*
* To conserve rpi's, filter out addresses for other
* vports on the same physical HBAs.
*/
if (Did != vport->fc_myDID &&
(!lpfc_find_vport_by_did(phba, Did) ||
vport->cfg_peer_port_login)) {
if (!phba->nvmet_support) {
/* FCPI/NVMEI path. Process Did */
lpfc_prep_node_fc4type(vport, Did, fc4_type);
return;
}
/* NVMET path. NVMET only cares about NVMEI nodes. */
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_type != NLP_NVME_INITIATOR ||
ndlp->nlp_state != NLP_STE_UNMAPPED_NODE)
continue;
spin_lock_irq(&ndlp->lock);
if (ndlp->nlp_DID == Did)
ndlp->nlp_flag &= ~NLP_NVMET_RECOV;
else
ndlp->nlp_flag |= NLP_NVMET_RECOV;
spin_unlock_irq(&ndlp->lock);
}
}
}
static int
lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint8_t fc4_type,
uint32_t Size)
{
struct lpfc_sli_ct_request *Response =
(struct lpfc_sli_ct_request *) mp->virt;
struct lpfc_dmabuf *mlast, *next_mp;
uint32_t *ctptr = (uint32_t *) & Response->un.gid.PortType;
uint32_t Did, CTentry;
int Cnt;
struct list_head head;
struct lpfc_nodelist *ndlp = NULL;
lpfc_set_disctmo(vport);
vport->num_disc_nodes = 0;
vport->fc_ns_retry = 0;
list_add_tail(&head, &mp->list);
list_for_each_entry_safe(mp, next_mp, &head, list) {
mlast = mp;
Cnt = Size > FCELSSIZE ? FCELSSIZE : Size;
Size -= Cnt;
if (!ctptr) {
ctptr = (uint32_t *) mlast->virt;
} else
Cnt -= 16; /* subtract length of CT header */
/* Loop through entire NameServer list of DIDs */
while (Cnt >= sizeof(uint32_t)) {
/* Get next DID from NameServer List */
CTentry = *ctptr++;
Did = ((be32_to_cpu(CTentry)) & Mask_DID);
lpfc_ns_rsp_audit_did(vport, Did, fc4_type);
if (CTentry & (cpu_to_be32(SLI_CT_LAST_ENTRY)))
goto nsout1;
Cnt -= sizeof(uint32_t);
}
ctptr = NULL;
}
/* All GID_FT entries processed. If the driver is running in
* in target mode, put impacted nodes into recovery and drop
* the RPI to flush outstanding IO.
*/
if (vport->phba->nvmet_support) {
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (!(ndlp->nlp_flag & NLP_NVMET_RECOV))
continue;
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RECOVERY);
spin_lock_irq(&ndlp->lock);
ndlp->nlp_flag &= ~NLP_NVMET_RECOV;
spin_unlock_irq(&ndlp->lock);
}
}
nsout1:
list_del(&head);
return 0;
}
static void
lpfc_cmpl_ct_cmd_gid_ft(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_dmabuf *outp;
struct lpfc_dmabuf *inp;
struct lpfc_sli_ct_request *CTrsp;
struct lpfc_sli_ct_request *CTreq;
struct lpfc_nodelist *ndlp;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
u32 ulp_word4 = get_job_word4(phba, rspiocb);
int rc, type;
/* First save ndlp, before we overwrite it */
ndlp = cmdiocb->ndlp;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->rsp_iocb = rspiocb;
inp = cmdiocb->cmd_dmabuf;
outp = cmdiocb->rsp_dmabuf;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT cmpl: status:x%x/x%x rtry:%d",
ulp_status, ulp_word4, vport->fc_ns_retry);
/* Ignore response if link flipped after this request was made */
if (cmdiocb->event_tag != phba->fc_eventTag) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"9043 Event tag mismatch. Ignoring NS rsp\n");
goto out;
}
/* Don't bother processing response if vport is being torn down. */
if (vport->load_flag & FC_UNLOADING) {
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
goto out;
}
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (lpfc_els_chk_latt(vport)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0216 Link event during NS query\n");
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
goto out;
}
if (lpfc_error_lost_link(vport, ulp_status, ulp_word4)) {
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0226 NS query failed due to link event: "
"ulp_status x%x ulp_word4 x%x fc_flag x%x "
"port_state x%x gidft_inp x%x\n",
ulp_status, ulp_word4, vport->fc_flag,
vport->port_state, vport->gidft_inp);
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
if (vport->gidft_inp)
vport->gidft_inp--;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
goto out;
}
spin_lock_irq(shost->host_lock);
if (vport->fc_flag & FC_RSCN_DEFERRED) {
vport->fc_flag &= ~FC_RSCN_DEFERRED;
spin_unlock_irq(shost->host_lock);
/* This is a GID_FT completing so the gidft_inp counter was
* incremented before the GID_FT was issued to the wire.
*/
if (vport->gidft_inp)
vport->gidft_inp--;
/*
* Skip processing the NS response
* Re-issue the NS cmd
*/
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"0151 Process Deferred RSCN Data: x%x x%x\n",
vport->fc_flag, vport->fc_rscn_id_cnt);
lpfc_els_handle_rscn(vport);
goto out;
}
spin_unlock_irq(shost->host_lock);
if (ulp_status) {
/* Check for retry */
if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
if (ulp_status != IOSTAT_LOCAL_REJECT ||
(ulp_word4 & IOERR_PARAM_MASK) !=
IOERR_NO_RESOURCES)
vport->fc_ns_retry++;
type = lpfc_get_gidft_type(vport, cmdiocb);
if (type == 0)
goto out;
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
/* CT command is being retried */
rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_FT,
vport->fc_ns_retry, type);
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 22:15:56 +08:00
if (rc == 0)
goto out;
else { /* Unable to send NS cmd */
if (vport->gidft_inp)
vport->gidft_inp--;
}
}
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0257 GID_FT Query error: 0x%x 0x%x\n",
ulp_status, vport->fc_ns_retry);
} else {
/* Good status, continue checking */
CTreq = (struct lpfc_sli_ct_request *) inp->virt;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (CTrsp->CommandResponse.bits.CmdRsp ==
cpu_to_be16(SLI_CT_RESPONSE_FS_ACC)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0208 NameServer Rsp Data: x%x x%x "
"x%x x%x sz x%x\n",
vport->fc_flag,
CTreq->un.gid.Fc4Type,
vport->num_disc_nodes,
vport->gidft_inp,
get_job_data_placed(phba, rspiocb));
lpfc_ns_rsp(vport,
outp,
CTreq->un.gid.Fc4Type,
get_job_data_placed(phba, rspiocb));
} else if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_RJT) {
/* NameServer Rsp Error */
if ((CTrsp->ReasonCode == SLI_CT_UNABLE_TO_PERFORM_REQ)
&& (CTrsp->Explanation == SLI_CT_NO_FC4_TYPES)) {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"0269 No NameServer Entries "
"Data: x%x x%x x%x x%x\n",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT no entry cmd:x%x rsn:x%x exp:x%x",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation);
} else {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"0240 NameServer Rsp Error "
"Data: x%x x%x x%x x%x\n",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT rsp err1 cmd:x%x rsn:x%x exp:x%x",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation);
}
} else {
/* NameServer Rsp Error */
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0241 NameServer Rsp Error "
"Data: x%x x%x x%x x%x\n",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_FT rsp err2 cmd:x%x rsn:x%x exp:x%x",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t) CTrsp->ReasonCode,
(uint32_t) CTrsp->Explanation);
}
if (vport->gidft_inp)
vport->gidft_inp--;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"4216 GID_FT cmpl inp %d disc %d\n",
vport->gidft_inp, vport->num_disc_nodes);
/* Link up / RSCN discovery */
if ((vport->num_disc_nodes == 0) &&
(vport->gidft_inp == 0)) {
/*
* The driver has cycled through all Nports in the RSCN payload.
* Complete the handling by cleaning up and marking the
* current driver state.
*/
if (vport->port_state >= LPFC_DISC_AUTH) {
if (vport->fc_flag & FC_RSCN_MODE) {
lpfc_els_flush_rscn(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_MODE; /* RSCN still */
spin_unlock_irq(shost->host_lock);
}
else
lpfc_els_flush_rscn(vport);
}
lpfc_disc_start(vport);
}
out:
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(ndlp);
return;
}
static void
lpfc_cmpl_ct_cmd_gid_pt(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_dmabuf *outp;
struct lpfc_dmabuf *inp;
struct lpfc_sli_ct_request *CTrsp;
struct lpfc_sli_ct_request *CTreq;
struct lpfc_nodelist *ndlp;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
u32 ulp_word4 = get_job_word4(phba, rspiocb);
int rc;
/* First save ndlp, before we overwrite it */
ndlp = cmdiocb->ndlp;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->rsp_iocb = rspiocb;
inp = cmdiocb->cmd_dmabuf;
outp = cmdiocb->rsp_dmabuf;
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GID_PT cmpl: status:x%x/x%x rtry:%d",
ulp_status, ulp_word4,
vport->fc_ns_retry);
/* Ignore response if link flipped after this request was made */
if (cmdiocb->event_tag != phba->fc_eventTag) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"9044 Event tag mismatch. Ignoring NS rsp\n");
goto out;
}
/* Don't bother processing response if vport is being torn down. */
if (vport->load_flag & FC_UNLOADING) {
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
goto out;
}
if (lpfc_els_chk_latt(vport)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"4108 Link event during NS query\n");
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
goto out;
}
if (lpfc_error_lost_link(vport, ulp_status, ulp_word4)) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"4166 NS query failed due to link event: "
"ulp_status x%x ulp_word4 x%x fc_flag x%x "
"port_state x%x gidft_inp x%x\n",
ulp_status, ulp_word4, vport->fc_flag,
vport->port_state, vport->gidft_inp);
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
if (vport->gidft_inp)
vport->gidft_inp--;
goto out;
}
spin_lock_irq(shost->host_lock);
if (vport->fc_flag & FC_RSCN_DEFERRED) {
vport->fc_flag &= ~FC_RSCN_DEFERRED;
spin_unlock_irq(shost->host_lock);
/* This is a GID_PT completing so the gidft_inp counter was
* incremented before the GID_PT was issued to the wire.
*/
if (vport->gidft_inp)
vport->gidft_inp--;
/*
* Skip processing the NS response
* Re-issue the NS cmd
*/
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
"4167 Process Deferred RSCN Data: x%x x%x\n",
vport->fc_flag, vport->fc_rscn_id_cnt);
lpfc_els_handle_rscn(vport);
goto out;
}
spin_unlock_irq(shost->host_lock);
if (ulp_status) {
/* Check for retry */
if (vport->fc_ns_retry < LPFC_MAX_NS_RETRY) {
if (ulp_status != IOSTAT_LOCAL_REJECT ||
(ulp_word4 & IOERR_PARAM_MASK) !=
IOERR_NO_RESOURCES)
vport->fc_ns_retry++;
/* CT command is being retried */
rc = lpfc_ns_cmd(vport, SLI_CTNS_GID_PT,
vport->fc_ns_retry, GID_PT_N_PORT);
if (rc == 0)
goto out;
else { /* Unable to send NS cmd */
if (vport->gidft_inp)
vport->gidft_inp--;
}
}
if (vport->fc_flag & FC_RSCN_MODE)
lpfc_els_flush_rscn(vport);
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"4103 GID_FT Query error: 0x%x 0x%x\n",
ulp_status, vport->fc_ns_retry);
} else {
/* Good status, continue checking */
CTreq = (struct lpfc_sli_ct_request *)inp->virt;
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"4105 NameServer Rsp Data: x%x x%x "
"x%x x%x sz x%x\n",
vport->fc_flag,
CTreq->un.gid.Fc4Type,
vport->num_disc_nodes,
vport->gidft_inp,
get_job_data_placed(phba, rspiocb));
lpfc_ns_rsp(vport,
outp,
CTreq->un.gid.Fc4Type,
get_job_data_placed(phba, rspiocb));
} else if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_RJT) {
/* NameServer Rsp Error */
if ((CTrsp->ReasonCode == SLI_CT_UNABLE_TO_PERFORM_REQ)
&& (CTrsp->Explanation == SLI_CT_NO_FC4_TYPES)) {
lpfc_printf_vlog(
vport, KERN_INFO, LOG_DISCOVERY,
"4106 No NameServer Entries "
"Data: x%x x%x x%x x%x\n",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t)CTrsp->ReasonCode,
(uint32_t)CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(
vport, LPFC_DISC_TRC_CT,
"GID_PT no entry cmd:x%x rsn:x%x exp:x%x",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t)CTrsp->ReasonCode,
(uint32_t)CTrsp->Explanation);
} else {
lpfc_printf_vlog(
vport, KERN_INFO, LOG_DISCOVERY,
"4107 NameServer Rsp Error "
"Data: x%x x%x x%x x%x\n",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t)CTrsp->ReasonCode,
(uint32_t)CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(
vport, LPFC_DISC_TRC_CT,
"GID_PT rsp err1 cmd:x%x rsn:x%x exp:x%x",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t)CTrsp->ReasonCode,
(uint32_t)CTrsp->Explanation);
}
} else {
/* NameServer Rsp Error */
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"4109 NameServer Rsp Error "
"Data: x%x x%x x%x x%x\n",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t)CTrsp->ReasonCode,
(uint32_t)CTrsp->Explanation,
vport->fc_flag);
lpfc_debugfs_disc_trc(
vport, LPFC_DISC_TRC_CT,
"GID_PT rsp err2 cmd:x%x rsn:x%x exp:x%x",
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
(uint32_t)CTrsp->ReasonCode,
(uint32_t)CTrsp->Explanation);
}
if (vport->gidft_inp)
vport->gidft_inp--;
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6450 GID_PT cmpl inp %d disc %d\n",
vport->gidft_inp, vport->num_disc_nodes);
/* Link up / RSCN discovery */
if ((vport->num_disc_nodes == 0) &&
(vport->gidft_inp == 0)) {
/*
* The driver has cycled through all Nports in the RSCN payload.
* Complete the handling by cleaning up and marking the
* current driver state.
*/
if (vport->port_state >= LPFC_DISC_AUTH) {
if (vport->fc_flag & FC_RSCN_MODE) {
lpfc_els_flush_rscn(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_MODE; /* RSCN still */
spin_unlock_irq(shost->host_lock);
} else {
lpfc_els_flush_rscn(vport);
}
}
lpfc_disc_start(vport);
}
out:
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(ndlp);
}
static void
lpfc_cmpl_ct_cmd_gff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_dmabuf *inp = cmdiocb->cmd_dmabuf;
struct lpfc_dmabuf *outp = cmdiocb->rsp_dmabuf;
struct lpfc_sli_ct_request *CTrsp;
int did, rc, retry;
uint8_t fbits;
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
struct lpfc_nodelist *ndlp = NULL, *free_ndlp = NULL;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
u32 ulp_word4 = get_job_word4(phba, rspiocb);
did = ((struct lpfc_sli_ct_request *) inp->virt)->un.gff.PortId;
did = be32_to_cpu(did);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GFF_ID cmpl: status:x%x/x%x did:x%x",
ulp_status, ulp_word4, did);
/* Ignore response if link flipped after this request was made */
if (cmdiocb->event_tag != phba->fc_eventTag) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"9045 Event tag mismatch. Ignoring NS rsp\n");
goto iocb_free;
}
if (ulp_status == IOSTAT_SUCCESS) {
/* Good status, continue checking */
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
fbits = CTrsp->un.gff_acc.fbits[FCP_TYPE_FEATURE_OFFSET];
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6431 Process GFF_ID rsp for %08x "
"fbits %02x %s %s\n",
did, fbits,
(fbits & FC4_FEATURE_INIT) ? "Initiator" : " ",
(fbits & FC4_FEATURE_TARGET) ? "Target" : " ");
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC) {
if ((fbits & FC4_FEATURE_INIT) &&
!(fbits & FC4_FEATURE_TARGET)) {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"0270 Skip x%x GFF "
"NameServer Rsp Data: (init) "
"x%x x%x\n", did, fbits,
vport->fc_rscn_id_cnt);
goto out;
}
}
}
else {
/* Check for retry */
if (cmdiocb->retry < LPFC_MAX_NS_RETRY) {
retry = 1;
if (ulp_status == IOSTAT_LOCAL_REJECT) {
switch ((ulp_word4 &
IOERR_PARAM_MASK)) {
case IOERR_NO_RESOURCES:
/* We don't increment the retry
* count for this case.
*/
break;
case IOERR_LINK_DOWN:
case IOERR_SLI_ABORTED:
case IOERR_SLI_DOWN:
retry = 0;
break;
default:
cmdiocb->retry++;
}
}
else
cmdiocb->retry++;
if (retry) {
/* CT command is being retried */
rc = lpfc_ns_cmd(vport, SLI_CTNS_GFF_ID,
cmdiocb->retry, did);
if (rc == 0) {
/* success */
free_ndlp = cmdiocb->ndlp;
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(free_ndlp);
return;
}
}
}
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0267 NameServer GFF Rsp "
"x%x Error (%d %d) Data: x%x x%x\n",
did, ulp_status, ulp_word4,
vport->fc_flag, vport->fc_rscn_id_cnt);
}
/* This is a target port, unregistered port, or the GFF_ID failed */
ndlp = lpfc_setup_disc_node(vport, did);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (ndlp) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0242 Process x%x GFF "
"NameServer Rsp Data: x%x x%x x%x\n",
did, ndlp->nlp_flag, vport->fc_flag,
vport->fc_rscn_id_cnt);
} else {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0243 Skip x%x GFF "
"NameServer Rsp Data: x%x x%x\n", did,
vport->fc_flag, vport->fc_rscn_id_cnt);
}
out:
/* Link up / RSCN discovery */
if (vport->num_disc_nodes)
vport->num_disc_nodes--;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6451 GFF_ID cmpl inp %d disc %d\n",
vport->gidft_inp, vport->num_disc_nodes);
if (vport->num_disc_nodes == 0) {
/*
* The driver has cycled through all Nports in the RSCN payload.
* Complete the handling by cleaning up and marking the
* current driver state.
*/
if (vport->port_state >= LPFC_DISC_AUTH) {
if (vport->fc_flag & FC_RSCN_MODE) {
lpfc_els_flush_rscn(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_RSCN_MODE; /* RSCN still */
spin_unlock_irq(shost->host_lock);
}
else
lpfc_els_flush_rscn(vport);
}
lpfc_disc_start(vport);
}
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
iocb_free:
free_ndlp = cmdiocb->ndlp;
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(free_ndlp);
return;
}
static void
lpfc_cmpl_ct_cmd_gft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_dmabuf *inp = cmdiocb->cmd_dmabuf;
struct lpfc_dmabuf *outp = cmdiocb->rsp_dmabuf;
struct lpfc_sli_ct_request *CTrsp;
int did;
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
struct lpfc_nodelist *ndlp = NULL;
struct lpfc_nodelist *ns_ndlp = cmdiocb->ndlp;
uint32_t fc4_data_0, fc4_data_1;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
u32 ulp_word4 = get_job_word4(phba, rspiocb);
did = ((struct lpfc_sli_ct_request *)inp->virt)->un.gft.PortId;
did = be32_to_cpu(did);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"GFT_ID cmpl: status:x%x/x%x did:x%x",
ulp_status, ulp_word4, did);
/* Ignore response if link flipped after this request was made */
if ((uint32_t)cmdiocb->event_tag != phba->fc_eventTag) {
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"9046 Event tag mismatch. Ignoring NS rsp\n");
goto out;
}
if (ulp_status == IOSTAT_SUCCESS) {
/* Good status, continue checking */
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
fc4_data_0 = be32_to_cpu(CTrsp->un.gft_acc.fc4_types[0]);
fc4_data_1 = be32_to_cpu(CTrsp->un.gft_acc.fc4_types[1]);
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6432 Process GFT_ID rsp for %08x "
"Data %08x %08x %s %s\n",
did, fc4_data_0, fc4_data_1,
(fc4_data_0 & LPFC_FC4_TYPE_BITMASK) ?
"FCP" : " ",
(fc4_data_1 & LPFC_FC4_TYPE_BITMASK) ?
"NVME" : " ");
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
/* Lookup the NPort_ID queried in the GFT_ID and find the
* driver's local node. It's an error if the driver
* doesn't have one.
*/
ndlp = lpfc_findnode_did(vport, did);
if (ndlp) {
/* The bitmask value for FCP and NVME FCP types is
* the same because they are 32 bits distant from
* each other in word0 and word0.
*/
if (fc4_data_0 & LPFC_FC4_TYPE_BITMASK)
ndlp->nlp_fc4_type |= NLP_FC4_FCP;
if (fc4_data_1 & LPFC_FC4_TYPE_BITMASK)
ndlp->nlp_fc4_type |= NLP_FC4_NVME;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3064 Setting ndlp x%px, DID x%06x "
"with FC4 x%08x, Data: x%08x x%08x "
"%d\n",
ndlp, did, ndlp->nlp_fc4_type,
FC_TYPE_FCP, FC_TYPE_NVME,
ndlp->nlp_state);
if (ndlp->nlp_state == NLP_STE_REG_LOGIN_ISSUE &&
ndlp->nlp_fc4_type) {
ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
lpfc_nlp_set_state(vport, ndlp,
NLP_STE_PRLI_ISSUE);
lpfc_issue_els_prli(vport, ndlp, 0);
} else if (!ndlp->nlp_fc4_type) {
/* If fc4 type is still unknown, then LOGO */
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"6443 Sending LOGO ndlp x%px,"
"DID x%06x with fc4_type: "
"x%08x, state: %d\n",
ndlp, did, ndlp->nlp_fc4_type,
ndlp->nlp_state);
lpfc_issue_els_logo(vport, ndlp, 0);
ndlp->nlp_prev_state = NLP_STE_REG_LOGIN_ISSUE;
lpfc_nlp_set_state(vport, ndlp,
NLP_STE_NPR_NODE);
}
}
} else
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"3065 GFT_ID failed x%08x\n", ulp_status);
out:
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(ns_ndlp);
}
static void
lpfc_cmpl_ct(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_dmabuf *inp;
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
struct lpfc_nodelist *ndlp;
int cmdcode, rc;
uint8_t retry;
uint32_t latt;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
u32 ulp_word4 = get_job_word4(phba, rspiocb);
/* First save ndlp, before we overwrite it */
ndlp = cmdiocb->ndlp;
/* we pass cmdiocb to state machine which needs rspiocb as well */
cmdiocb->rsp_iocb = rspiocb;
inp = cmdiocb->cmd_dmabuf;
outp = cmdiocb->rsp_dmabuf;
cmdcode = be16_to_cpu(((struct lpfc_sli_ct_request *) inp->virt)->
CommandResponse.bits.CmdRsp);
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
latt = lpfc_els_chk_latt(vport);
/* RFT request completes status <ulp_status> CmdRsp <CmdRsp> */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0209 CT Request completes, latt %d, "
"ulp_status x%x CmdRsp x%x, Context x%x, Tag x%x\n",
latt, ulp_status,
be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp),
get_job_ulpcontext(phba, cmdiocb), cmdiocb->iotag);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"CT cmd cmpl: status:x%x/x%x cmd:x%x",
ulp_status, ulp_word4, cmdcode);
if (ulp_status) {
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0268 NS cmd x%x Error (x%x x%x)\n",
cmdcode, ulp_status, ulp_word4);
if (ulp_status == IOSTAT_LOCAL_REJECT &&
(((ulp_word4 & IOERR_PARAM_MASK) ==
IOERR_SLI_DOWN) ||
((ulp_word4 & IOERR_PARAM_MASK) ==
IOERR_SLI_ABORTED)))
goto out;
retry = cmdiocb->retry;
if (retry >= LPFC_MAX_NS_RETRY)
goto out;
retry++;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0250 Retrying NS cmd %x\n", cmdcode);
rc = lpfc_ns_cmd(vport, cmdcode, retry, 0);
if (rc == 0)
goto out;
}
out:
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(ndlp);
return;
}
static void
lpfc_cmpl_ct_cmd_rft_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
if (ulp_status == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = cmdiocb->rsp_dmabuf;
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC)
vport->ct_flags |= FC_CT_RFT_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rnn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
if (ulp_status == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = cmdiocb->rsp_dmabuf;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC)
vport->ct_flags |= FC_CT_RNN_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rspn_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
if (ulp_status == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = cmdiocb->rsp_dmabuf;
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC)
vport->ct_flags |= FC_CT_RSPN_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rsnn_nn(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
if (ulp_status == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = cmdiocb->rsp_dmabuf;
CTrsp = (struct lpfc_sli_ct_request *) outp->virt;
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC)
vport->ct_flags |= FC_CT_RSNN_NN;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_da_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
/* even if it fails we will act as though it succeeded. */
vport->ct_flags = 0;
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
static void
lpfc_cmpl_ct_cmd_rff_id(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
if (ulp_status == IOSTAT_SUCCESS) {
struct lpfc_dmabuf *outp;
struct lpfc_sli_ct_request *CTrsp;
outp = cmdiocb->rsp_dmabuf;
CTrsp = (struct lpfc_sli_ct_request *)outp->virt;
if (be16_to_cpu(CTrsp->CommandResponse.bits.CmdRsp) ==
SLI_CT_RESPONSE_FS_ACC)
vport->ct_flags |= FC_CT_RFF_ID;
}
lpfc_cmpl_ct(phba, cmdiocb, rspiocb);
return;
}
/*
* Although the symbolic port name is thought to be an integer
* as of January 18, 2016, leave it as a string until more of
* the record state becomes defined.
*/
int
lpfc_vport_symbolic_port_name(struct lpfc_vport *vport, char *symbol,
size_t size)
{
int n;
/*
* Use the lpfc board number as the Symbolic Port
* Name object. NPIV is not in play so this integer
* value is sufficient and unique per FC-ID.
*/
scsi: lpfc: change snprintf to scnprintf for possible overflow Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-22 00:44:32 +08:00
n = scnprintf(symbol, size, "%d", vport->phba->brd_no);
return n;
}
int
lpfc_vport_symbolic_node_name(struct lpfc_vport *vport, char *symbol,
size_t size)
{
char fwrev[FW_REV_STR_SIZE] = {0};
char tmp[MAXHOSTNAMELEN] = {0};
memset(symbol, 0, size);
scnprintf(tmp, sizeof(tmp), "Emulex %s", vport->phba->ModelName);
if (strlcat(symbol, tmp, size) >= size)
goto buffer_done;
lpfc_decode_firmware_rev(vport->phba, fwrev, 0);
scnprintf(tmp, sizeof(tmp), " FV%s", fwrev);
if (strlcat(symbol, tmp, size) >= size)
goto buffer_done;
scnprintf(tmp, sizeof(tmp), " DV%s", lpfc_release_version);
if (strlcat(symbol, tmp, size) >= size)
goto buffer_done;
scnprintf(tmp, sizeof(tmp), " HN:%s", vport->phba->os_host_name);
if (strlcat(symbol, tmp, size) >= size)
goto buffer_done;
/* Note :- OS name is "Linux" */
scnprintf(tmp, sizeof(tmp), " OS:%s", init_utsname()->sysname);
strlcat(symbol, tmp, size);
buffer_done:
return strnlen(symbol, size);
}
static uint32_t
lpfc_find_map_node(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp, *next_ndlp;
struct Scsi_Host *shost;
uint32_t cnt = 0;
shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_type & NLP_FABRIC)
continue;
if ((ndlp->nlp_state == NLP_STE_MAPPED_NODE) ||
(ndlp->nlp_state == NLP_STE_UNMAPPED_NODE))
cnt++;
}
spin_unlock_irq(shost->host_lock);
return cnt;
}
/*
* This routine will return the FC4 Type associated with the CT
* GID_FT command.
*/
int
lpfc_get_gidft_type(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb)
{
struct lpfc_sli_ct_request *CtReq;
struct lpfc_dmabuf *mp;
uint32_t type;
mp = cmdiocb->cmd_dmabuf;
if (mp == NULL)
return 0;
CtReq = (struct lpfc_sli_ct_request *)mp->virt;
type = (uint32_t)CtReq->un.gid.Fc4Type;
if ((type != SLI_CTPT_FCP) && (type != SLI_CTPT_NVME))
return 0;
return type;
}
/*
* lpfc_ns_cmd
* Description:
* Issue Cmd to NameServer
* SLI_CTNS_GID_FT
* LI_CTNS_RFT_ID
*/
int
lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
uint8_t retry, uint32_t context)
{
struct lpfc_nodelist * ndlp;
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *mp, *bmp;
struct lpfc_sli_ct_request *CtReq;
struct ulp_bde64 *bpl;
void (*cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *) = NULL;
uint32_t *ptr;
uint32_t rsp_size = 1024;
size_t size;
int rc = 0;
ndlp = lpfc_findnode_did(vport, NameServer_DID);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (!ndlp || ndlp->nlp_state != NLP_STE_UNMAPPED_NODE) {
rc=1;
goto ns_cmd_exit;
}
/* fill in BDEs for command */
/* Allocate buffer for command payload */
mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp) {
rc=2;
goto ns_cmd_exit;
}
INIT_LIST_HEAD(&mp->list);
mp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(mp->phys));
if (!mp->virt) {
rc=3;
goto ns_cmd_free_mp;
}
/* Allocate buffer for Buffer ptr list */
bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!bmp) {
rc=4;
goto ns_cmd_free_mpvirt;
}
INIT_LIST_HEAD(&bmp->list);
bmp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(bmp->phys));
if (!bmp->virt) {
rc=5;
goto ns_cmd_free_bmp;
}
/* NameServer Req */
lpfc_printf_vlog(vport, KERN_INFO ,LOG_DISCOVERY,
"0236 NameServer Req Data: x%x x%x x%x x%x\n",
cmdcode, vport->fc_flag, vport->fc_rscn_id_cnt,
context);
bpl = (struct ulp_bde64 *) bmp->virt;
memset(bpl, 0, sizeof(struct ulp_bde64));
bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys) );
bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys) );
bpl->tus.f.bdeFlags = 0;
if (cmdcode == SLI_CTNS_GID_FT)
bpl->tus.f.bdeSize = GID_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_GID_PT)
bpl->tus.f.bdeSize = GID_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_GFF_ID)
bpl->tus.f.bdeSize = GFF_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_GFT_ID)
bpl->tus.f.bdeSize = GFT_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RFT_ID)
bpl->tus.f.bdeSize = RFT_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RNN_ID)
bpl->tus.f.bdeSize = RNN_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RSPN_ID)
bpl->tus.f.bdeSize = RSPN_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RSNN_NN)
bpl->tus.f.bdeSize = RSNN_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_DA_ID)
bpl->tus.f.bdeSize = DA_ID_REQUEST_SZ;
else if (cmdcode == SLI_CTNS_RFF_ID)
bpl->tus.f.bdeSize = RFF_REQUEST_SZ;
else
bpl->tus.f.bdeSize = 0;
bpl->tus.w = le32_to_cpu(bpl->tus.w);
CtReq = (struct lpfc_sli_ct_request *) mp->virt;
memset(CtReq, 0, sizeof(struct lpfc_sli_ct_request));
CtReq->RevisionId.bits.Revision = SLI_CT_REVISION;
CtReq->RevisionId.bits.InId = 0;
CtReq->FsType = SLI_CT_DIRECTORY_SERVICE;
CtReq->FsSubType = SLI_CT_DIRECTORY_NAME_SERVER;
CtReq->CommandResponse.bits.Size = 0;
switch (cmdcode) {
case SLI_CTNS_GID_FT:
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_GID_FT);
CtReq->un.gid.Fc4Type = context;
if (vport->port_state < LPFC_NS_QRY)
vport->port_state = LPFC_NS_QRY;
lpfc_set_disctmo(vport);
cmpl = lpfc_cmpl_ct_cmd_gid_ft;
rsp_size = FC_MAX_NS_RSP;
break;
case SLI_CTNS_GID_PT:
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_GID_PT);
CtReq->un.gid.PortType = context;
if (vport->port_state < LPFC_NS_QRY)
vport->port_state = LPFC_NS_QRY;
lpfc_set_disctmo(vport);
cmpl = lpfc_cmpl_ct_cmd_gid_pt;
rsp_size = FC_MAX_NS_RSP;
break;
case SLI_CTNS_GFF_ID:
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_GFF_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.gff.PortId = cpu_to_be32(context);
cmpl = lpfc_cmpl_ct_cmd_gff_id;
break;
case SLI_CTNS_GFT_ID:
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_GFT_ID);
CtReq->un.gft.PortId = cpu_to_be32(context);
cmpl = lpfc_cmpl_ct_cmd_gft_id;
break;
case SLI_CTNS_RFT_ID:
vport->ct_flags &= ~FC_CT_RFT_ID;
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_RFT_ID);
CtReq->un.rft.port_id = cpu_to_be32(vport->fc_myDID);
/* Register Application Services type if vmid enabled. */
if (phba->cfg_vmid_app_header)
CtReq->un.rft.app_serv_reg =
cpu_to_be32(RFT_APP_SERV_REG);
/* Register FC4 FCP type if enabled. */
if (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH ||
vport->cfg_enable_fc4_type == LPFC_ENABLE_FCP)
CtReq->un.rft.fcp_reg = cpu_to_be32(RFT_FCP_REG);
/* Register NVME type if enabled. */
if (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH ||
vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)
CtReq->un.rft.nvme_reg = cpu_to_be32(RFT_NVME_REG);
ptr = (uint32_t *)CtReq;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6433 Issue RFT (%s %s %s): %08x %08x %08x "
"%08x %08x %08x %08x %08x\n",
CtReq->un.rft.fcp_reg ? "FCP" : " ",
CtReq->un.rft.nvme_reg ? "NVME" : " ",
CtReq->un.rft.app_serv_reg ? "APPS" : " ",
*ptr, *(ptr + 1), *(ptr + 2), *(ptr + 3),
*(ptr + 4), *(ptr + 5),
*(ptr + 6), *(ptr + 7));
cmpl = lpfc_cmpl_ct_cmd_rft_id;
break;
case SLI_CTNS_RNN_ID:
vport->ct_flags &= ~FC_CT_RNN_ID;
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_RNN_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.rnn.PortId = cpu_to_be32(vport->fc_myDID);
memcpy(CtReq->un.rnn.wwnn, &vport->fc_nodename,
sizeof(struct lpfc_name));
cmpl = lpfc_cmpl_ct_cmd_rnn_id;
break;
case SLI_CTNS_RSPN_ID:
vport->ct_flags &= ~FC_CT_RSPN_ID;
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_RSPN_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.rspn.PortId = cpu_to_be32(vport->fc_myDID);
size = sizeof(CtReq->un.rspn.symbname);
CtReq->un.rspn.len =
lpfc_vport_symbolic_port_name(vport,
CtReq->un.rspn.symbname, size);
cmpl = lpfc_cmpl_ct_cmd_rspn_id;
break;
case SLI_CTNS_RSNN_NN:
vport->ct_flags &= ~FC_CT_RSNN_NN;
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_RSNN_NN);
memcpy(CtReq->un.rsnn.wwnn, &vport->fc_nodename,
sizeof(struct lpfc_name));
size = sizeof(CtReq->un.rsnn.symbname);
CtReq->un.rsnn.len =
lpfc_vport_symbolic_node_name(vport,
CtReq->un.rsnn.symbname, size);
cmpl = lpfc_cmpl_ct_cmd_rsnn_nn;
break;
case SLI_CTNS_DA_ID:
/* Implement DA_ID Nameserver request */
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_DA_ID);
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 14:52:54 +08:00
CtReq->un.da_id.port_id = cpu_to_be32(vport->fc_myDID);
cmpl = lpfc_cmpl_ct_cmd_da_id;
break;
case SLI_CTNS_RFF_ID:
vport->ct_flags &= ~FC_CT_RFF_ID;
CtReq->CommandResponse.bits.CmdRsp =
cpu_to_be16(SLI_CTNS_RFF_ID);
CtReq->un.rff.PortId = cpu_to_be32(vport->fc_myDID);
CtReq->un.rff.fbits = FC4_FEATURE_INIT;
/* The driver always supports FC_TYPE_FCP. However, the
* caller can specify NVME (type x28) as well. But only
* these that FC4 type is supported.
*/
if (((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
(vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) &&
(context == FC_TYPE_NVME)) {
if ((vport == phba->pport) && phba->nvmet_support) {
CtReq->un.rff.fbits = (FC4_FEATURE_TARGET |
FC4_FEATURE_NVME_DISC);
lpfc_nvmet_update_targetport(phba);
} else {
lpfc_nvme_update_localport(vport);
}
CtReq->un.rff.type_code = context;
} else if (((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) ||
(vport->cfg_enable_fc4_type == LPFC_ENABLE_FCP)) &&
(context == FC_TYPE_FCP))
CtReq->un.rff.type_code = context;
else
goto ns_cmd_free_bmpvirt;
ptr = (uint32_t *)CtReq;
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"6434 Issue RFF (%s): %08x %08x %08x %08x "
"%08x %08x %08x %08x\n",
(context == FC_TYPE_NVME) ? "NVME" : "FCP",
*ptr, *(ptr + 1), *(ptr + 2), *(ptr + 3),
*(ptr + 4), *(ptr + 5),
*(ptr + 6), *(ptr + 7));
cmpl = lpfc_cmpl_ct_cmd_rff_id;
break;
}
/* The lpfc_ct_cmd/lpfc_get_req shall increment ndlp reference count
* to hold ndlp reference for the corresponding callback function.
*/
if (!lpfc_ct_cmd(vport, mp, bmp, ndlp, cmpl, rsp_size, retry)) {
/* On success, The cmpl function will free the buffers */
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"Issue CT cmd: cmd:x%x did:x%x",
cmdcode, ndlp->nlp_DID, 0);
return 0;
}
rc=6;
ns_cmd_free_bmpvirt:
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
ns_cmd_free_bmp:
kfree(bmp);
ns_cmd_free_mpvirt:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
ns_cmd_free_mp:
kfree(mp);
ns_cmd_exit:
scsi: lpfc: Add an internal trace log buffer The current logging methods typically end up requesting a reproduction with a different logging level set to figure out what happened. This was mainly by design to not clutter the kernel log messages with things that were typically not interesting and the messages themselves could cause other issues. When looking to make a better system, it was seen that in many cases when more data was wanted was when another message, usually at KERN_ERR level, was logged. And in most cases, what the additional logging that was then enabled was typically. Most of these areas fell into the discovery machine. Based on this summary, the following design has been put in place: The driver will maintain an internal log (256 elements of 256 bytes). The "additional logging" messages that are usually enabled in a reproduction will be changed to now log all the time to the internal log. A new logging level is defined - LOG_TRACE_EVENT. When this level is set (it is not by default) and a message marked as KERN_ERR is logged, all the messages in the internal log will be dumped to the kernel log before the KERN_ERR message is logged. There is a timestamp on each message added to the internal log. However, this timestamp is not converted to wall time when logged. The value of the timestamp is solely to give a crude time reference for the messages. Link: https://lore.kernel.org/r/20200630215001.70793-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01 05:50:00 +08:00
lpfc_printf_vlog(vport, KERN_ERR, LOG_TRACE_EVENT,
"0266 Issue NameServer Req x%x err %d Data: x%x x%x\n",
cmdcode, rc, vport->fc_flag, vport->fc_rscn_id_cnt);
return 1;
}
/**
* lpfc_fdmi_rprt_defer - Check for any deferred FDMI RPRT commands
* @phba: Pointer to HBA context object.
* @mask: Initial port attributes mask
*
* This function checks to see if any vports have deferred their FDMI RPRT.
* A vports RPRT may be deferred if it is issued before the primary ports
* RHBA completes.
*/
static void
lpfc_fdmi_rprt_defer(struct lpfc_hba *phba, uint32_t mask)
{
struct lpfc_vport **vports;
struct lpfc_vport *vport;
struct lpfc_nodelist *ndlp;
int i;
phba->hba_flag |= HBA_RHBA_CMPL;
vports = lpfc_create_vport_work_array(phba);
if (vports) {
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
vport = vports[i];
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
continue;
if (vport->ct_flags & FC_CT_RPRT_DEFER) {
vport->ct_flags &= ~FC_CT_RPRT_DEFER;
vport->fdmi_port_mask = mask;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT, 0);
}
}
}
lpfc_destroy_vport_work_array(phba, vports);
}
/**
* lpfc_cmpl_ct_disc_fdmi - Handle a discovery FDMI completion
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to the command IOCBQ.
* @rspiocb: Pointer to the response IOCBQ.
*
* This function to handle the completion of a driver initiated FDMI
* CT command issued during discovery.
*/
static void
lpfc_cmpl_ct_disc_fdmi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_dmabuf *inp = cmdiocb->cmd_dmabuf;
struct lpfc_dmabuf *outp = cmdiocb->rsp_dmabuf;
struct lpfc_sli_ct_request *CTcmd = inp->virt;
struct lpfc_sli_ct_request *CTrsp = outp->virt;
__be16 fdmi_cmd = CTcmd->CommandResponse.bits.CmdRsp;
__be16 fdmi_rsp = CTrsp->CommandResponse.bits.CmdRsp;
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
struct lpfc_nodelist *ndlp, *free_ndlp = NULL;
uint32_t latt, cmd, err;
u32 ulp_status = get_job_ulpstatus(phba, rspiocb);
u32 ulp_word4 = get_job_word4(phba, rspiocb);
latt = lpfc_els_chk_latt(vport);
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_CT,
"FDMI cmpl: status:x%x/x%x latt:%d",
ulp_status, ulp_word4, latt);
if (latt || ulp_status) {
/* Look for a retryable error */
if (ulp_status == IOSTAT_LOCAL_REJECT) {
switch ((ulp_word4 & IOERR_PARAM_MASK)) {
case IOERR_SLI_ABORTED:
scsi: lpfc: Fix list corruption in lpfc_sli_get_iocbq After study, it was determined there was a double free of a CT iocb during execution of lpfc_offline_prep and lpfc_offline. The prep routine issued an abort for some CT iocbs, but the aborts did not complete fast enough for a subsequent routine that waits for completion. Thus the driver proceeded to lpfc_offline, which releases any pending iocbs. Unfortunately, the completions for the aborts were then received which re-released the ct iocbs. Turns out the issue for why the aborts didn't complete fast enough was not their time on the wire/in the adapter. It was the lpfc_work_done routine, which requires the adapter state to be UP before it calls lpfc_sli_handle_slow_ring_event() to process the completions. The issue is the prep routine takes the link down as part of it's processing. To fix, the following was performed: - Prevent the offline routine from releasing iocbs that have had aborts issued on them. Defer to the abort completions. Also means the driver fully waits for the completions. Given this change, the recognition of "driver-generated" status which then releases the iocb is no longer valid. As such, the change made in the commit 296012285c90 is reverted. As recognition of "driver-generated" status is no longer valid, this patch reverts the changes made in commit 296012285c90 ("scsi: lpfc: Fix leak of ELS completions on adapter reset") - Modify lpfc_work_done to allow slow path completions so that the abort completions aren't ignored. - Updated the fdmi path to recognize a CT request that fails due to the port being unusable. This stops FDMI retries. FDMI will be restarted on next link up. Link: https://lore.kernel.org/r/20190922035906.10977-14-jsmart2021@gmail.com Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-22 11:58:59 +08:00
case IOERR_SLI_DOWN:
/* Driver aborted this IO. No retry as error
* is likely Offline->Online or some adapter
* error. Recovery will try again.
*/
break;
case IOERR_ABORT_IN_PROGRESS:
case IOERR_SEQUENCE_TIMEOUT:
case IOERR_ILLEGAL_FRAME:
case IOERR_NO_RESOURCES:
case IOERR_ILLEGAL_COMMAND:
cmdiocb->retry++;
if (cmdiocb->retry >= LPFC_FDMI_MAX_RETRY)
break;
/* Retry the same FDMI command */
err = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING,
cmdiocb, 0);
if (err == IOCB_ERROR)
break;
return;
default:
break;
}
}
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0229 FDMI cmd %04x failed, latt = %d "
"ulp_status: x%x, rid x%x\n",
be16_to_cpu(fdmi_cmd), latt, ulp_status,
ulp_word4);
}
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
free_ndlp = cmdiocb->ndlp;
lpfc_ct_free_iocb(phba, cmdiocb);
scsi: lpfc: Rework locations of ndlp reference taking Now that the driver has gone to a normal ref interface (with no odd logic) the discovery logic needs to be updated to reworked so that it properly takes references when it should and give them up when it should. Rework the driver for the following get/put model: - Move gets to just before an I/O is issued. Add gets for places where an I/O was issued without one. - Ensure that failures from lpfc_nlp_get() are handled by the driver. - Check and fix the placement of lpfc_nlp_puts relative to io completions. Note: some of these paths may not release the reference on the exact io completion as the reference is held as the code takes another step in the discovery thread and which may cause another io to be issued. - Rearrange some code for error processing and calling lpfc_nlp_put. - Fix some places of incorrect reference freeing that was causing the premature releasing of the structure. - Nvmet plogi handling performs unreg_rpi's. The reference counts were unbalanced resulting in premature node removal. In some cases this caused loss of node discovery. Corrected the reftaking around nvmet plogis. Nodes that experience devloss now get released from the node list now that there is a proper reference taking. Link: https://lore.kernel.org/r/20201115192646.12977-3-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:31 +08:00
lpfc_nlp_put(free_ndlp);
ndlp = lpfc_findnode_did(vport, FDMI_DID);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (!ndlp)
return;
/* Check for a CT LS_RJT response */
cmd = be16_to_cpu(fdmi_cmd);
if (be16_to_cpu(fdmi_rsp) == SLI_CT_RESPONSE_FS_RJT) {
/* FDMI rsp failed */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY | LOG_ELS,
"0220 FDMI cmd failed FS_RJT Data: x%x", cmd);
/* Should we fallback to FDMI-2 / FDMI-1 ? */
switch (cmd) {
case SLI_MGMT_RHBA:
if (vport->fdmi_hba_mask == LPFC_FDMI2_HBA_ATTR) {
/* Fallback to FDMI-1 for HBA attributes */
vport->fdmi_hba_mask = LPFC_FDMI1_HBA_ATTR;
/* If HBA attributes are FDMI1, so should
* port attributes be for consistency.
*/
vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
/* Start over */
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
}
return;
case SLI_MGMT_RPRT:
if (vport->port_type != LPFC_PHYSICAL_PORT) {
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
return;
}
if (vport->fdmi_port_mask == LPFC_FDMI2_PORT_ATTR) {
/* Fallback to FDMI-1 */
vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
/* Start over */
lpfc_fdmi_cmd(vport, ndlp, cmd, 0);
return;
}
if (vport->fdmi_port_mask == LPFC_FDMI2_SMART_ATTR) {
vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
/* Retry the same command */
lpfc_fdmi_cmd(vport, ndlp, cmd, 0);
}
return;
case SLI_MGMT_RPA:
/* No retry on Vendor, RPA only done on physical port */
if (phba->link_flag & LS_CT_VEN_RPA) {
phba->link_flag &= ~LS_CT_VEN_RPA;
if (phba->cmf_active_mode == LPFC_CFG_OFF)
return;
lpfc_printf_log(phba, KERN_WARNING,
LOG_DISCOVERY | LOG_ELS,
"6460 VEN FDMI RPA RJT\n");
return;
}
if (vport->fdmi_port_mask == LPFC_FDMI2_PORT_ATTR) {
/* Fallback to FDMI-1 */
vport->fdmi_hba_mask = LPFC_FDMI1_HBA_ATTR;
vport->fdmi_port_mask = LPFC_FDMI1_PORT_ATTR;
/* Start over */
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
return;
}
if (vport->fdmi_port_mask == LPFC_FDMI2_SMART_ATTR) {
vport->fdmi_port_mask = LPFC_FDMI2_PORT_ATTR;
/* Retry the same command */
lpfc_fdmi_cmd(vport, ndlp, cmd, 0);
}
return;
}
}
/*
* On success, need to cycle thru FDMI registration for discovery
* DHBA -> DPRT -> RHBA -> RPA (physical port)
* DPRT -> RPRT (vports)
*/
switch (cmd) {
case SLI_MGMT_RHBA:
/* Check for any RPRTs deferred till after RHBA completes */
lpfc_fdmi_rprt_defer(phba, vport->fdmi_port_mask);
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA, 0);
break;
case SLI_MGMT_DHBA:
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0);
break;
case SLI_MGMT_DPRT:
if (vport->port_type == LPFC_PHYSICAL_PORT) {
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RHBA, 0);
} else {
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
return;
/* Only issue a RPRT for the vport if the RHBA
* for the physical port completes successfully.
* We may have to defer the RPRT accordingly.
*/
if (phba->hba_flag & HBA_RHBA_CMPL) {
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT, 0);
} else {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY,
"6078 RPRT deferred\n");
vport->ct_flags |= FC_CT_RPRT_DEFER;
}
}
break;
case SLI_MGMT_RPA:
if (vport->port_type == LPFC_PHYSICAL_PORT &&
phba->sli4_hba.pc_sli4_params.mi_ver) {
/* mi is only for the phyical port, no vports */
if (phba->link_flag & LS_CT_VEN_RPA) {
lpfc_printf_vlog(vport, KERN_INFO,
LOG_DISCOVERY | LOG_ELS |
LOG_CGN_MGMT,
"6449 VEN RPA FDMI Success\n");
phba->link_flag &= ~LS_CT_VEN_RPA;
break;
}
lpfc_printf_log(phba, KERN_INFO,
LOG_DISCOVERY | LOG_CGN_MGMT,
"6210 Issue Vendor MI FDMI %x\n",
phba->sli4_hba.pc_sli4_params.mi_ver);
/* CGN is only for the physical port, no vports */
if (lpfc_fdmi_cmd(vport, ndlp, cmd,
LPFC_FDMI_VENDOR_ATTR_mi) == 0)
phba->link_flag |= LS_CT_VEN_RPA;
lpfc_printf_log(phba, KERN_INFO,
LOG_DISCOVERY | LOG_ELS,
"6458 Send MI FDMI:%x Flag x%x\n",
phba->sli4_hba.pc_sli4_params.mi_ver,
phba->link_flag);
} else {
lpfc_printf_log(phba, KERN_INFO,
LOG_DISCOVERY | LOG_ELS,
"6459 No FDMI VEN MI support - "
"RPA Success\n");
}
break;
}
return;
}
/**
* lpfc_fdmi_change_check - Check for changed FDMI parameters
* @vport: pointer to a host virtual N_Port data structure.
*
* Check how many mapped NPorts we are connected to
* Check if our hostname changed
* Called from hbeat timeout routine to check if any FDMI parameters
* changed. If so, re-register those Attributes.
*/
void
lpfc_fdmi_change_check(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp;
uint16_t cnt;
if (!lpfc_is_link_up(phba))
return;
/* Must be connected to a Fabric */
if (!(vport->fc_flag & FC_FABRIC))
return;
ndlp = lpfc_findnode_did(vport, FDMI_DID);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (!ndlp)
return;
/* Check if system hostname changed */
if (strcmp(phba->os_host_name, init_utsname()->nodename)) {
memset(phba->os_host_name, 0, sizeof(phba->os_host_name));
scnprintf(phba->os_host_name, sizeof(phba->os_host_name), "%s",
init_utsname()->nodename);
lpfc_ns_cmd(vport, SLI_CTNS_RSNN_NN, 0, 0);
/* Since this effects multiple HBA and PORT attributes, we need
* de-register and go thru the whole FDMI registration cycle.
* DHBA -> DPRT -> RHBA -> RPA (physical port)
* DPRT -> RPRT (vports)
*/
if (vport->port_type == LPFC_PHYSICAL_PORT) {
/* For extra Vendor RPA */
phba->link_flag &= ~LS_CT_VEN_RPA;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DHBA, 0);
} else {
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
return;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_DPRT, 0);
}
/* Since this code path registers all the port attributes
* we can just return without further checking.
*/
return;
}
if (!(vport->fdmi_port_mask & LPFC_FDMI_PORT_ATTR_num_disc))
return;
/* Check if the number of mapped NPorts changed */
cnt = lpfc_find_map_node(vport);
if (cnt == vport->fdmi_num_disc)
return;
if (vport->port_type == LPFC_PHYSICAL_PORT) {
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPA,
LPFC_FDMI_PORT_ATTR_num_disc);
} else {
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
return;
lpfc_fdmi_cmd(vport, ndlp, SLI_MGMT_RPRT,
LPFC_FDMI_PORT_ATTR_num_disc);
}
}
static inline int
lpfc_fdmi_set_attr_u32(void *attr, uint16_t attrtype, uint32_t attrval)
{
struct lpfc_fdmi_attr_u32 *ae = attr;
int size = sizeof(*ae);
ae->type = cpu_to_be16(attrtype);
ae->len = cpu_to_be16(size);
ae->value_u32 = cpu_to_be32(attrval);
return size;
}
static inline int
lpfc_fdmi_set_attr_wwn(void *attr, uint16_t attrtype, struct lpfc_name *wwn)
{
struct lpfc_fdmi_attr_wwn *ae = attr;
int size = sizeof(*ae);
ae->type = cpu_to_be16(attrtype);
ae->len = cpu_to_be16(size);
/* WWN's assumed to be bytestreams - Big Endian presentation */
memcpy(ae->name, wwn,
min_t(size_t, sizeof(struct lpfc_name), sizeof(__be64)));
return size;
}
static inline int
lpfc_fdmi_set_attr_fullwwn(void *attr, uint16_t attrtype,
struct lpfc_name *wwnn, struct lpfc_name *wwpn)
{
struct lpfc_fdmi_attr_fullwwn *ae = attr;
u8 *nname = ae->nname;
u8 *pname = ae->pname;
int size = sizeof(*ae);
ae->type = cpu_to_be16(attrtype);
ae->len = cpu_to_be16(size);
/* WWN's assumed to be bytestreams - Big Endian presentation */
memcpy(nname, wwnn,
min_t(size_t, sizeof(struct lpfc_name), sizeof(__be64)));
memcpy(pname, wwpn,
min_t(size_t, sizeof(struct lpfc_name), sizeof(__be64)));
return size;
}
static inline int
lpfc_fdmi_set_attr_string(void *attr, uint16_t attrtype, char *attrstring)
{
struct lpfc_fdmi_attr_string *ae = attr;
int len, size;
/*
* We are trusting the caller that if a fdmi string field
* is capped at 64 bytes, the caller passes in a string of
* 64 bytes or less.
*/
strncpy(ae->value_string, attrstring, sizeof(ae->value_string));
len = strnlen(ae->value_string, sizeof(ae->value_string));
/* round string length to a 32bit boundary. Ensure there's a NULL */
len += (len & 3) ? (4 - (len & 3)) : 4;
/* size is Type/Len (4 bytes) plus string length */
size = FOURBYTES + len;
ae->type = cpu_to_be16(attrtype);
ae->len = cpu_to_be16(size);
return size;
}
/* Bitfields for FC4 Types that can be reported */
#define ATTR_FC4_CT 0x00000001
#define ATTR_FC4_FCP 0x00000002
#define ATTR_FC4_NVME 0x00000004
static inline int
lpfc_fdmi_set_attr_fc4types(void *attr, uint16_t attrtype, uint32_t typemask)
{
struct lpfc_fdmi_attr_fc4types *ae = attr;
int size = sizeof(*ae);
ae->type = cpu_to_be16(attrtype);
ae->len = cpu_to_be16(size);
if (typemask & ATTR_FC4_FCP)
ae->value_types[2] = 0x01; /* Type 0x8 - FCP */
if (typemask & ATTR_FC4_CT)
ae->value_types[7] = 0x01; /* Type 0x20 - CT */
if (typemask & ATTR_FC4_NVME)
ae->value_types[6] = 0x01; /* Type 0x28 - NVME */
return size;
}
/* Routines for all individual HBA attributes */
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_wwnn(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_wwn(attr, RHBA_NODENAME,
&vport->fc_sparam.nodeName);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_manufacturer(struct lpfc_vport *vport, void *attr)
{
/* This string MUST be consistent with other FC platforms
* supported by Broadcom.
*/
return lpfc_fdmi_set_attr_string(attr, RHBA_MANUFACTURER,
"Emulex Corporation");
}
static int
lpfc_fdmi_hba_attr_sn(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
return lpfc_fdmi_set_attr_string(attr, RHBA_SERIAL_NUMBER,
phba->SerialNumber);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_model(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
return lpfc_fdmi_set_attr_string(attr, RHBA_MODEL,
phba->ModelName);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_description(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
return lpfc_fdmi_set_attr_string(attr, RHBA_MODEL_DESCRIPTION,
phba->ModelDesc);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_hdw_ver(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
lpfc_vpd_t *vp = &phba->vpd;
char buf[16] = { 0 };
snprintf(buf, sizeof(buf), "%08x", vp->rev.biuRev);
return lpfc_fdmi_set_attr_string(attr, RHBA_HARDWARE_VERSION, buf);
}
static int
lpfc_fdmi_hba_attr_drvr_ver(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_string(attr, RHBA_DRIVER_VERSION,
lpfc_release_version);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_rom_ver(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
char buf[64] = { 0 };
if (phba->sli_rev == LPFC_SLI_REV4) {
lpfc_decode_firmware_rev(phba, buf, 1);
return lpfc_fdmi_set_attr_string(attr, RHBA_OPTION_ROM_VERSION,
buf);
}
return lpfc_fdmi_set_attr_string(attr, RHBA_OPTION_ROM_VERSION,
phba->OptionROMVersion);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_fmw_ver(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
char buf[64] = { 0 };
lpfc_decode_firmware_rev(phba, buf, 1);
return lpfc_fdmi_set_attr_string(attr, RHBA_FIRMWARE_VERSION, buf);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_os_ver(struct lpfc_vport *vport, void *attr)
{
char buf[256] = { 0 };
snprintf(buf, sizeof(buf), "%s %s %s",
init_utsname()->sysname,
init_utsname()->release,
init_utsname()->version);
return lpfc_fdmi_set_attr_string(attr, RHBA_OS_NAME_VERSION, buf);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_ct_len(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RHBA_MAX_CT_PAYLOAD_LEN,
LPFC_MAX_CT_SIZE);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_symbolic_name(struct lpfc_vport *vport, void *attr)
{
char buf[256] = { 0 };
lpfc_vport_symbolic_node_name(vport, buf, sizeof(buf));
return lpfc_fdmi_set_attr_string(attr, RHBA_SYM_NODENAME, buf);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_vendor_info(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RHBA_VENDOR_INFO, 0);
}
static int
lpfc_fdmi_hba_attr_num_ports(struct lpfc_vport *vport, void *attr)
{
/* Each driver instance corresponds to a single port */
return lpfc_fdmi_set_attr_u32(attr, RHBA_NUM_PORTS, 1);
}
static int
lpfc_fdmi_hba_attr_fabric_wwnn(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_wwn(attr, RHBA_FABRIC_WWNN,
&vport->fabric_nodename);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_bios_ver(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
return lpfc_fdmi_set_attr_string(attr, RHBA_BIOS_VERSION,
phba->BIOSVersion);
}
static int
lpfc_fdmi_hba_attr_bios_state(struct lpfc_vport *vport, void *attr)
{
/* Driver doesn't have access to this information */
return lpfc_fdmi_set_attr_u32(attr, RHBA_BIOS_STATE, 0);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_hba_attr_vendor_id(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_string(attr, RHBA_VENDOR_ID, "EMULEX");
}
/*
* Routines for all individual PORT attributes
*/
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_fc4type(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
u32 fc4types;
fc4types = (ATTR_FC4_CT | ATTR_FC4_FCP);
/* Check to see if Firmware supports NVME and on physical port */
if ((phba->sli_rev == LPFC_SLI_REV4) && (vport == phba->pport) &&
phba->sli4_hba.pc_sli4_params.nvme)
fc4types |= ATTR_FC4_NVME;
return lpfc_fdmi_set_attr_fc4types(attr, RPRT_SUPPORTED_FC4_TYPES,
fc4types);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
u32 speeds = 0;
u32 tcfg;
u8 i, cnt;
if (!(phba->hba_flag & HBA_FCOE_MODE)) {
cnt = 0;
if (phba->sli_rev == LPFC_SLI_REV4) {
tcfg = phba->sli4_hba.conf_trunk;
for (i = 0; i < 4; i++, tcfg >>= 1)
if (tcfg & 1)
cnt++;
}
if (cnt > 2) { /* 4 lane trunk group */
if (phba->lmt & LMT_64Gb)
speeds |= HBA_PORTSPEED_256GFC;
if (phba->lmt & LMT_32Gb)
speeds |= HBA_PORTSPEED_128GFC;
if (phba->lmt & LMT_16Gb)
speeds |= HBA_PORTSPEED_64GFC;
} else if (cnt) { /* 2 lane trunk group */
if (phba->lmt & LMT_128Gb)
speeds |= HBA_PORTSPEED_256GFC;
if (phba->lmt & LMT_64Gb)
speeds |= HBA_PORTSPEED_128GFC;
if (phba->lmt & LMT_32Gb)
speeds |= HBA_PORTSPEED_64GFC;
if (phba->lmt & LMT_16Gb)
speeds |= HBA_PORTSPEED_32GFC;
} else {
if (phba->lmt & LMT_256Gb)
speeds |= HBA_PORTSPEED_256GFC;
if (phba->lmt & LMT_128Gb)
speeds |= HBA_PORTSPEED_128GFC;
if (phba->lmt & LMT_64Gb)
speeds |= HBA_PORTSPEED_64GFC;
if (phba->lmt & LMT_32Gb)
speeds |= HBA_PORTSPEED_32GFC;
if (phba->lmt & LMT_16Gb)
speeds |= HBA_PORTSPEED_16GFC;
if (phba->lmt & LMT_10Gb)
speeds |= HBA_PORTSPEED_10GFC;
if (phba->lmt & LMT_8Gb)
speeds |= HBA_PORTSPEED_8GFC;
if (phba->lmt & LMT_4Gb)
speeds |= HBA_PORTSPEED_4GFC;
if (phba->lmt & LMT_2Gb)
speeds |= HBA_PORTSPEED_2GFC;
if (phba->lmt & LMT_1Gb)
speeds |= HBA_PORTSPEED_1GFC;
}
} else {
/* FCoE links support only one speed */
switch (phba->fc_linkspeed) {
case LPFC_ASYNC_LINK_SPEED_10GBPS:
speeds = HBA_PORTSPEED_10GE;
break;
case LPFC_ASYNC_LINK_SPEED_25GBPS:
speeds = HBA_PORTSPEED_25GE;
break;
case LPFC_ASYNC_LINK_SPEED_40GBPS:
speeds = HBA_PORTSPEED_40GE;
break;
case LPFC_ASYNC_LINK_SPEED_100GBPS:
speeds = HBA_PORTSPEED_100GE;
break;
}
}
return lpfc_fdmi_set_attr_u32(attr, RPRT_SUPPORTED_SPEED, speeds);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
u32 speeds = 0;
if (!(phba->hba_flag & HBA_FCOE_MODE)) {
switch (phba->fc_linkspeed) {
case LPFC_LINK_SPEED_1GHZ:
speeds = HBA_PORTSPEED_1GFC;
break;
case LPFC_LINK_SPEED_2GHZ:
speeds = HBA_PORTSPEED_2GFC;
break;
case LPFC_LINK_SPEED_4GHZ:
speeds = HBA_PORTSPEED_4GFC;
break;
case LPFC_LINK_SPEED_8GHZ:
speeds = HBA_PORTSPEED_8GFC;
break;
case LPFC_LINK_SPEED_10GHZ:
speeds = HBA_PORTSPEED_10GFC;
break;
case LPFC_LINK_SPEED_16GHZ:
speeds = HBA_PORTSPEED_16GFC;
break;
case LPFC_LINK_SPEED_32GHZ:
speeds = HBA_PORTSPEED_32GFC;
break;
case LPFC_LINK_SPEED_64GHZ:
speeds = HBA_PORTSPEED_64GFC;
break;
case LPFC_LINK_SPEED_128GHZ:
speeds = HBA_PORTSPEED_128GFC;
break;
case LPFC_LINK_SPEED_256GHZ:
speeds = HBA_PORTSPEED_256GFC;
break;
default:
speeds = HBA_PORTSPEED_UNKNOWN;
break;
}
} else {
switch (phba->fc_linkspeed) {
case LPFC_ASYNC_LINK_SPEED_10GBPS:
speeds = HBA_PORTSPEED_10GE;
break;
case LPFC_ASYNC_LINK_SPEED_25GBPS:
speeds = HBA_PORTSPEED_25GE;
break;
case LPFC_ASYNC_LINK_SPEED_40GBPS:
speeds = HBA_PORTSPEED_40GE;
break;
case LPFC_ASYNC_LINK_SPEED_100GBPS:
speeds = HBA_PORTSPEED_100GE;
break;
default:
speeds = HBA_PORTSPEED_UNKNOWN;
break;
}
}
return lpfc_fdmi_set_attr_u32(attr, RPRT_PORT_SPEED, speeds);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_max_frame(struct lpfc_vport *vport, void *attr)
{
struct serv_parm *hsp = (struct serv_parm *)&vport->fc_sparam;
return lpfc_fdmi_set_attr_u32(attr, RPRT_MAX_FRAME_SIZE,
(((uint32_t)hsp->cmn.bbRcvSizeMsb & 0x0F) << 8) |
(uint32_t)hsp->cmn.bbRcvSizeLsb);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_os_devname(struct lpfc_vport *vport, void *attr)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
char buf[64] = { 0 };
snprintf(buf, sizeof(buf), "/sys/class/scsi_host/host%d",
shost->host_no);
return lpfc_fdmi_set_attr_string(attr, RPRT_OS_DEVICE_NAME, buf);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_host_name(struct lpfc_vport *vport, void *attr)
{
char buf[64] = { 0 };
scnprintf(buf, sizeof(buf), "%s", vport->phba->os_host_name);
return lpfc_fdmi_set_attr_string(attr, RPRT_HOST_NAME, buf);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_wwnn(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_wwn(attr, RPRT_NODENAME,
&vport->fc_sparam.nodeName);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_wwpn(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_wwn(attr, RPRT_PORTNAME,
&vport->fc_sparam.portName);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_symbolic_name(struct lpfc_vport *vport, void *attr)
{
char buf[256] = { 0 };
lpfc_vport_symbolic_port_name(vport, buf, sizeof(buf));
return lpfc_fdmi_set_attr_string(attr, RPRT_SYM_PORTNAME, buf);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_port_type(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
return lpfc_fdmi_set_attr_u32(attr, RPRT_PORT_TYPE,
(phba->fc_topology == LPFC_TOPOLOGY_LOOP) ?
LPFC_FDMI_PORTTYPE_NLPORT :
LPFC_FDMI_PORTTYPE_NPORT);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_class(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RPRT_SUPPORTED_CLASS,
FC_COS_CLASS2 | FC_COS_CLASS3);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_fabric_wwpn(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_wwn(attr, RPRT_FABRICNAME,
&vport->fabric_portname);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_active_fc4type(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
u32 fc4types;
fc4types = (ATTR_FC4_CT | ATTR_FC4_FCP);
/* Check to see if NVME is configured or not */
if (vport == phba->pport &&
phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME)
fc4types |= ATTR_FC4_NVME;
return lpfc_fdmi_set_attr_fc4types(attr, RPRT_ACTIVE_FC4_TYPES,
fc4types);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_port_state(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RPRT_PORT_STATE,
LPFC_FDMI_PORTSTATE_ONLINE);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_num_disc(struct lpfc_vport *vport, void *attr)
{
vport->fdmi_num_disc = lpfc_find_map_node(vport);
return lpfc_fdmi_set_attr_u32(attr, RPRT_DISC_PORT,
vport->fdmi_num_disc);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_port_attr_nportid(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RPRT_PORT_ID, vport->fc_myDID);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_service(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_string(attr, RPRT_SMART_SERVICE,
"Smart SAN Initiator");
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_guid(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_fullwwn(attr, RPRT_SMART_GUID,
&vport->fc_sparam.nodeName,
&vport->fc_sparam.portName);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_version(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_string(attr, RPRT_SMART_VERSION,
"Smart SAN Version 2.0");
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_model(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
return lpfc_fdmi_set_attr_string(attr, RPRT_SMART_MODEL,
phba->ModelName);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_port_info(struct lpfc_vport *vport, void *attr)
{
/* SRIOV (type 3) is not supported */
return lpfc_fdmi_set_attr_u32(attr, RPRT_SMART_PORT_INFO,
(vport->vpi) ? 2 /* NPIV */ : 1 /* Physical */);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_qos(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RPRT_SMART_QOS, 0);
}
scsi: lpfc: Mark symbols static where possible We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-25 13:44:55 +08:00
static int
lpfc_fdmi_smart_attr_security(struct lpfc_vport *vport, void *attr)
{
return lpfc_fdmi_set_attr_u32(attr, RPRT_SMART_SECURITY, 1);
}
static int
lpfc_fdmi_vendor_attr_mi(struct lpfc_vport *vport, void *attr)
{
struct lpfc_hba *phba = vport->phba;
char buf[32] = { 0 };
sprintf(buf, "ELXE2EM:%04d", phba->sli4_hba.pc_sli4_params.mi_ver);
return lpfc_fdmi_set_attr_string(attr, RPRT_VENDOR_MI, buf);
}
/* RHBA attribute jump table */
static int (*lpfc_fdmi_hba_action[])
(struct lpfc_vport *vport, void *attrbuf) = {
/* Action routine Mask bit Attribute type */
lpfc_fdmi_hba_attr_wwnn, /* bit0 RHBA_NODENAME */
lpfc_fdmi_hba_attr_manufacturer, /* bit1 RHBA_MANUFACTURER */
lpfc_fdmi_hba_attr_sn, /* bit2 RHBA_SERIAL_NUMBER */
lpfc_fdmi_hba_attr_model, /* bit3 RHBA_MODEL */
lpfc_fdmi_hba_attr_description, /* bit4 RHBA_MODEL_DESCRIPTION */
lpfc_fdmi_hba_attr_hdw_ver, /* bit5 RHBA_HARDWARE_VERSION */
lpfc_fdmi_hba_attr_drvr_ver, /* bit6 RHBA_DRIVER_VERSION */
lpfc_fdmi_hba_attr_rom_ver, /* bit7 RHBA_OPTION_ROM_VERSION */
lpfc_fdmi_hba_attr_fmw_ver, /* bit8 RHBA_FIRMWARE_VERSION */
lpfc_fdmi_hba_attr_os_ver, /* bit9 RHBA_OS_NAME_VERSION */
lpfc_fdmi_hba_attr_ct_len, /* bit10 RHBA_MAX_CT_PAYLOAD_LEN */
lpfc_fdmi_hba_attr_symbolic_name, /* bit11 RHBA_SYM_NODENAME */
lpfc_fdmi_hba_attr_vendor_info, /* bit12 RHBA_VENDOR_INFO */
lpfc_fdmi_hba_attr_num_ports, /* bit13 RHBA_NUM_PORTS */
lpfc_fdmi_hba_attr_fabric_wwnn, /* bit14 RHBA_FABRIC_WWNN */
lpfc_fdmi_hba_attr_bios_ver, /* bit15 RHBA_BIOS_VERSION */
lpfc_fdmi_hba_attr_bios_state, /* bit16 RHBA_BIOS_STATE */
lpfc_fdmi_hba_attr_vendor_id, /* bit17 RHBA_VENDOR_ID */
};
/* RPA / RPRT attribute jump table */
static int (*lpfc_fdmi_port_action[])
(struct lpfc_vport *vport, void *attrbuf) = {
/* Action routine Mask bit Attribute type */
lpfc_fdmi_port_attr_fc4type, /* bit0 RPRT_SUPPORT_FC4_TYPES */
lpfc_fdmi_port_attr_support_speed, /* bit1 RPRT_SUPPORTED_SPEED */
lpfc_fdmi_port_attr_speed, /* bit2 RPRT_PORT_SPEED */
lpfc_fdmi_port_attr_max_frame, /* bit3 RPRT_MAX_FRAME_SIZE */
lpfc_fdmi_port_attr_os_devname, /* bit4 RPRT_OS_DEVICE_NAME */
lpfc_fdmi_port_attr_host_name, /* bit5 RPRT_HOST_NAME */
lpfc_fdmi_port_attr_wwnn, /* bit6 RPRT_NODENAME */
lpfc_fdmi_port_attr_wwpn, /* bit7 RPRT_PORTNAME */
lpfc_fdmi_port_attr_symbolic_name, /* bit8 RPRT_SYM_PORTNAME */
lpfc_fdmi_port_attr_port_type, /* bit9 RPRT_PORT_TYPE */
lpfc_fdmi_port_attr_class, /* bit10 RPRT_SUPPORTED_CLASS */
lpfc_fdmi_port_attr_fabric_wwpn, /* bit11 RPRT_FABRICNAME */
lpfc_fdmi_port_attr_active_fc4type, /* bit12 RPRT_ACTIVE_FC4_TYPES */
lpfc_fdmi_port_attr_port_state, /* bit13 RPRT_PORT_STATE */
lpfc_fdmi_port_attr_num_disc, /* bit14 RPRT_DISC_PORT */
lpfc_fdmi_port_attr_nportid, /* bit15 RPRT_PORT_ID */
lpfc_fdmi_smart_attr_service, /* bit16 RPRT_SMART_SERVICE */
lpfc_fdmi_smart_attr_guid, /* bit17 RPRT_SMART_GUID */
lpfc_fdmi_smart_attr_version, /* bit18 RPRT_SMART_VERSION */
lpfc_fdmi_smart_attr_model, /* bit19 RPRT_SMART_MODEL */
lpfc_fdmi_smart_attr_port_info, /* bit20 RPRT_SMART_PORT_INFO */
lpfc_fdmi_smart_attr_qos, /* bit21 RPRT_SMART_QOS */
lpfc_fdmi_smart_attr_security, /* bit22 RPRT_SMART_SECURITY */
lpfc_fdmi_vendor_attr_mi, /* bit23 RPRT_VENDOR_MI */
};
/**
* lpfc_fdmi_cmd - Build and send a FDMI cmd to the specified NPort
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: ndlp to send FDMI cmd to (if NULL use FDMI_DID)
scsi: lpfc: Fix-up formatting/docrot where appropriate Other headers have been demoted as they are too far out of sync and ideally require effort from the authors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'usr_flg' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'num_entry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'tmo' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'retry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'rsp_size' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'retry' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'cmdcode' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'new_mask' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3272: warning: Function parameter or member 't' not described in 'lpfc_delayed_disc_tmo' Link: https://lore.kernel.org/r/20200721164148.2617584-31-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-22 00:41:38 +08:00
* @cmdcode: FDMI command to send
* @new_mask: Mask of HBA or PORT Attributes to send
*
* Builds and sends a FDMI command using the CT subsystem.
*/
int
lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
int cmdcode, uint32_t new_mask)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *rq, *rsp;
struct lpfc_sli_ct_request *CtReq;
struct ulp_bde64_le *bde;
uint32_t bit_pos;
uint32_t size, addsz;
uint32_t rsp_size;
uint32_t mask;
struct lpfc_fdmi_reg_hba *rh;
struct lpfc_fdmi_port_entry *pe;
struct lpfc_fdmi_reg_portattr *pab = NULL, *base = NULL;
struct lpfc_fdmi_attr_block *ab = NULL;
int (*func)(struct lpfc_vport *vport, void *attrbuf);
void (*cmpl)(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb);
scsi: lpfc: Rework remote port ref counting and node freeing When a remote port is disconnected and disappears, its node structure (ndlp) stays allocated and on a vport node list. While on the list it can be matched, thus requires validation checks on state to be added in numerous code paths. If the node comes back, its possible for there to be multiple node structures for the same device on the vport node list. There is no reason to keep the node structure around after it is no longer in existence, and the current implementation creates problems for itself (multiple nodes) and lots of unnecessary code for state validation. Additionally, the reference taking on the node structure didn't follow the normal model used by the kernel kref api. It included lots of odd logic to match state with reference count. The combination of this odd logic plus the way it was implicitly used in the discovery engine made its reference taking implementation suspect and extremely hard to follow. Change the driver such that the reference taking routines are now normal ref increments/decrements and callout on refcount=0. With this in place, the rework can be done such that the node structure is fully removed and deallocated when the remote port no longer exists and all references are removed. This removal logic, and the basic ref counting are intrically tied, thus in a single patch. Link: https://lore.kernel.org/r/20201115192646.12977-2-james.smart@broadcom.com Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-11-16 03:26:30 +08:00
if (!ndlp)
return 0;
cmpl = lpfc_cmpl_ct_disc_fdmi; /* called from discovery */
/* fill in BDEs for command */
/* Allocate buffer for command payload */
rq = kmalloc(sizeof(*rq), GFP_KERNEL);
if (!rq)
goto fdmi_cmd_exit;
rq->virt = lpfc_mbuf_alloc(phba, 0, &rq->phys);
if (!rq->virt)
goto fdmi_cmd_free_rq;
/* Allocate buffer for Buffer ptr list */
rsp = kmalloc(sizeof(*rsp), GFP_KERNEL);
if (!rsp)
goto fdmi_cmd_free_rqvirt;
rsp->virt = lpfc_mbuf_alloc(phba, 0, &rsp->phys);
if (!rsp->virt)
goto fdmi_cmd_free_rsp;
INIT_LIST_HEAD(&rq->list);
INIT_LIST_HEAD(&rsp->list);
/* mbuf buffers are 1K in length - aka LPFC_BPL_SIZE */
memset(rq->virt, 0, LPFC_BPL_SIZE);
rsp_size = LPFC_BPL_SIZE;
/* FDMI request */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0218 FDMI Request x%x mask x%x Data: x%x x%x x%x\n",
cmdcode, new_mask, vport->fdmi_port_mask,
vport->fc_flag, vport->port_state);
CtReq = (struct lpfc_sli_ct_request *)rq->virt;
/* First populate the CT_IU preamble */
CtReq->RevisionId.bits.Revision = SLI_CT_REVISION;
CtReq->RevisionId.bits.InId = 0;
CtReq->FsType = SLI_CT_MANAGEMENT_SERVICE;
CtReq->FsSubType = SLI_CT_FDMI_Subtypes;
CtReq->CommandResponse.bits.CmdRsp = cpu_to_be16(cmdcode);
size = 0;
/* Next fill in the specific FDMI cmd information */
switch (cmdcode) {
case SLI_MGMT_RHAT:
case SLI_MGMT_RHBA:
rh = (struct lpfc_fdmi_reg_hba *)&CtReq->un;
/* HBA Identifier */
memcpy(&rh->hi.PortName, &phba->pport->fc_sparam.portName,
sizeof(struct lpfc_name));
size += sizeof(struct lpfc_fdmi_hba_ident);
if (cmdcode == SLI_MGMT_RHBA) {
/* Registered Port List */
/* One entry (port) per adapter */
rh->rpl.EntryCnt = cpu_to_be32(1);
memcpy(&rh->rpl.pe.PortName,
&phba->pport->fc_sparam.portName,
sizeof(struct lpfc_name));
size += sizeof(struct lpfc_fdmi_reg_port_list);
}
ab = (struct lpfc_fdmi_attr_block *)((uint8_t *)rh + size);
ab->EntryCnt = 0;
size += FOURBYTES; /* add length of EntryCnt field */
bit_pos = 0;
if (new_mask)
mask = new_mask;
else
mask = vport->fdmi_hba_mask;
/* Mask will dictate what attributes to build in the request */
while (mask) {
if (mask & 0x1) {
func = lpfc_fdmi_hba_action[bit_pos];
addsz = func(vport, ((uint8_t *)rh + size));
if (addsz) {
ab->EntryCnt++;
size += addsz;
}
/* check if another attribute fits */
if ((size + FDMI_MAX_ATTRLEN) >
(LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
goto hba_out;
}
mask = mask >> 1;
bit_pos++;
}
hba_out:
ab->EntryCnt = cpu_to_be32(ab->EntryCnt);
/* Total size */
size += GID_REQUEST_SZ - 4;
break;
case SLI_MGMT_RPRT:
if (vport->port_type != LPFC_PHYSICAL_PORT) {
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
return 0;
}
fallthrough;
case SLI_MGMT_RPA:
/* Store base ptr right after preamble */
base = (struct lpfc_fdmi_reg_portattr *)&CtReq->un;
if (cmdcode == SLI_MGMT_RPRT) {
rh = (struct lpfc_fdmi_reg_hba *)base;
/* HBA Identifier */
memcpy(&rh->hi.PortName,
&phba->pport->fc_sparam.portName,
sizeof(struct lpfc_name));
pab = (struct lpfc_fdmi_reg_portattr *)
((uint8_t *)base + sizeof(struct lpfc_name));
size += sizeof(struct lpfc_name);
} else {
pab = base;
}
memcpy((uint8_t *)&pab->PortName,
(uint8_t *)&vport->fc_sparam.portName,
sizeof(struct lpfc_name));
pab->ab.EntryCnt = 0;
/* add length of name and EntryCnt field */
size += sizeof(struct lpfc_name) + FOURBYTES;
bit_pos = 0;
if (new_mask)
mask = new_mask;
else
mask = vport->fdmi_port_mask;
/* Mask will dictate what attributes to build in the request */
while (mask) {
if (mask & 0x1) {
func = lpfc_fdmi_port_action[bit_pos];
addsz = func(vport, ((uint8_t *)base + size));
if (addsz) {
pab->ab.EntryCnt++;
size += addsz;
}
/* check if another attribute fits */
if ((size + FDMI_MAX_ATTRLEN) >
(LPFC_BPL_SIZE - LPFC_CT_PREAMBLE))
goto port_out;
}
mask = mask >> 1;
bit_pos++;
}
port_out:
pab->ab.EntryCnt = cpu_to_be32(pab->ab.EntryCnt);
size += GID_REQUEST_SZ - 4;
break;
case SLI_MGMT_GHAT:
case SLI_MGMT_GRPL:
rsp_size = FC_MAX_NS_RSP;
fallthrough;
case SLI_MGMT_DHBA:
case SLI_MGMT_DHAT:
pe = (struct lpfc_fdmi_port_entry *)&CtReq->un;
memcpy((uint8_t *)&pe->PortName,
(uint8_t *)&vport->fc_sparam.portName,
sizeof(struct lpfc_name));
size = GID_REQUEST_SZ - 4 + sizeof(struct lpfc_name);
break;
case SLI_MGMT_GPAT:
case SLI_MGMT_GPAS:
rsp_size = FC_MAX_NS_RSP;
fallthrough;
case SLI_MGMT_DPRT:
if (vport->port_type != LPFC_PHYSICAL_PORT) {
ndlp = lpfc_findnode_did(phba->pport, FDMI_DID);
if (!ndlp)
return 0;
}
fallthrough;
case SLI_MGMT_DPA:
pe = (struct lpfc_fdmi_port_entry *)&CtReq->un;
memcpy((uint8_t *)&pe->PortName,
(uint8_t *)&vport->fc_sparam.portName,
sizeof(struct lpfc_name));
size = GID_REQUEST_SZ - 4 + sizeof(struct lpfc_name);
break;
case SLI_MGMT_GRHL:
size = GID_REQUEST_SZ - 4;
break;
default:
lpfc_printf_vlog(vport, KERN_WARNING, LOG_DISCOVERY,
"0298 FDMI cmdcode x%x not supported\n",
cmdcode);
goto fdmi_cmd_free_rspvirt;
}
CtReq->CommandResponse.bits.Size = cpu_to_be16(rsp_size);
bde = (struct ulp_bde64_le *)rsp->virt;
bde->addr_high = cpu_to_le32(putPaddrHigh(rq->phys));
bde->addr_low = cpu_to_le32(putPaddrLow(rq->phys));
bde->type_size = cpu_to_le32(ULP_BDE64_TYPE_BDE_64 <<
ULP_BDE64_TYPE_SHIFT);
bde->type_size |= cpu_to_le32(size);
/*
* The lpfc_ct_cmd/lpfc_get_req shall increment ndlp reference count
* to hold ndlp reference for the corresponding callback function.
*/
if (!lpfc_ct_cmd(vport, rq, rsp, ndlp, cmpl, rsp_size, 0))
return 0;
fdmi_cmd_free_rspvirt:
lpfc_mbuf_free(phba, rsp->virt, rsp->phys);
fdmi_cmd_free_rsp:
kfree(rsp);
fdmi_cmd_free_rqvirt:
lpfc_mbuf_free(phba, rq->virt, rq->phys);
fdmi_cmd_free_rq:
kfree(rq);
fdmi_cmd_exit:
/* Issue FDMI request failed */
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"0244 Issue FDMI request failed Data: x%x\n",
cmdcode);
return 1;
}
/**
* lpfc_delayed_disc_tmo - Timeout handler for delayed discovery timer.
scsi: lpfc: Fix-up formatting/docrot where appropriate Other headers have been demoted as they are too far out of sync and ideally require effort from the authors. Fixes the following W=1 kernel build warning(s): drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'usr_flg' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'num_entry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'tmo' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:321: warning: Function parameter or member 'retry' not described in 'lpfc_gen_req' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'rsp_size' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:413: warning: Function parameter or member 'retry' not described in 'lpfc_ct_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'cmdcode' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3030: warning: Function parameter or member 'new_mask' not described in 'lpfc_fdmi_cmd' drivers/scsi/lpfc/lpfc_ct.c:3272: warning: Function parameter or member 't' not described in 'lpfc_delayed_disc_tmo' Link: https://lore.kernel.org/r/20200721164148.2617584-31-lee.jones@linaro.org Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-22 00:41:38 +08:00
* @t: Context object of the timer.
*
* This function set the WORKER_DELAYED_DISC_TMO flag and wake up
* the worker thread.
**/
void
lpfc_delayed_disc_tmo(struct timer_list *t)
{
struct lpfc_vport *vport = from_timer(vport, t, delayed_disc_tmo);
struct lpfc_hba *phba = vport->phba;
uint32_t tmo_posted;
unsigned long iflag;
spin_lock_irqsave(&vport->work_port_lock, iflag);
tmo_posted = vport->work_port_events & WORKER_DELAYED_DISC_TMO;
if (!tmo_posted)
vport->work_port_events |= WORKER_DELAYED_DISC_TMO;
spin_unlock_irqrestore(&vport->work_port_lock, iflag);
if (!tmo_posted)
lpfc_worker_wake_up(phba);
return;
}
/**
* lpfc_delayed_disc_timeout_handler - Function called by worker thread to
* handle delayed discovery.
* @vport: pointer to a host virtual N_Port data structure.
*
* This function start nport discovery of the vport.
**/
void
lpfc_delayed_disc_timeout_handler(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
spin_lock_irq(shost->host_lock);
if (!(vport->fc_flag & FC_DISC_DELAYED)) {
spin_unlock_irq(shost->host_lock);
return;
}
vport->fc_flag &= ~FC_DISC_DELAYED;
spin_unlock_irq(shost->host_lock);
lpfc_do_scr_ns_plogi(vport->phba, vport);
}
void
lpfc_decode_firmware_rev(struct lpfc_hba *phba, char *fwrevision, int flag)
{
struct lpfc_sli *psli = &phba->sli;
lpfc_vpd_t *vp = &phba->vpd;
uint32_t b1, b2, b3, b4, i, rev;
char c;
uint32_t *ptr, str[4];
uint8_t *fwname;
if (phba->sli_rev == LPFC_SLI_REV4)
snprintf(fwrevision, FW_REV_STR_SIZE, "%s", vp->rev.opFwName);
else if (vp->rev.rBit) {
if (psli->sli_flag & LPFC_SLI_ACTIVE)
rev = vp->rev.sli2FwRev;
else
rev = vp->rev.sli1FwRev;
b1 = (rev & 0x0000f000) >> 12;
b2 = (rev & 0x00000f00) >> 8;
b3 = (rev & 0x000000c0) >> 6;
b4 = (rev & 0x00000030) >> 4;
switch (b4) {
case 0:
c = 'N';
break;
case 1:
c = 'A';
break;
case 2:
c = 'B';
break;
2011-10-11 09:32:10 +08:00
case 3:
c = 'X';
break;
default:
c = 0;
break;
}
b4 = (rev & 0x0000000f);
if (psli->sli_flag & LPFC_SLI_ACTIVE)
fwname = vp->rev.sli2FwName;
else
fwname = vp->rev.sli1FwName;
for (i = 0; i < 16; i++)
if (fwname[i] == 0x20)
fwname[i] = 0;
ptr = (uint32_t*)fwname;
for (i = 0; i < 3; i++)
str[i] = be32_to_cpu(*ptr++);
if (c == 0) {
if (flag)
sprintf(fwrevision, "%d.%d%d (%s)",
b1, b2, b3, (char *)str);
else
sprintf(fwrevision, "%d.%d%d", b1,
b2, b3);
} else {
if (flag)
sprintf(fwrevision, "%d.%d%d%c%d (%s)",
b1, b2, b3, c,
b4, (char *)str);
else
sprintf(fwrevision, "%d.%d%d%c%d",
b1, b2, b3, c, b4);
}
} else {
rev = vp->rev.smFwRev;
b1 = (rev & 0xff000000) >> 24;
b2 = (rev & 0x00f00000) >> 20;
b3 = (rev & 0x000f0000) >> 16;
c = (rev & 0x0000ff00) >> 8;
b4 = (rev & 0x000000ff);
sprintf(fwrevision, "%d.%d%d%c%d", b1, b2, b3, c, b4);
}
return;
}
static void
lpfc_cmpl_ct_cmd_vmid(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb)
{
struct lpfc_vport *vport = cmdiocb->vport;
struct lpfc_dmabuf *inp = cmdiocb->cmd_dmabuf;
struct lpfc_dmabuf *outp = cmdiocb->rsp_dmabuf;
struct lpfc_sli_ct_request *ctcmd = inp->virt;
struct lpfc_sli_ct_request *ctrsp = outp->virt;
__be16 rsp = ctrsp->CommandResponse.bits.CmdRsp;
struct app_id_object *app;
struct lpfc_nodelist *ndlp = cmdiocb->ndlp;
u32 cmd, hash, bucket;
struct lpfc_vmid *vmp, *cur;
u8 *data = outp->virt;
int i;
cmd = be16_to_cpu(ctcmd->CommandResponse.bits.CmdRsp);
if (cmd == SLI_CTAS_DALLAPP_ID)
lpfc_ct_free_iocb(phba, cmdiocb);
if (lpfc_els_chk_latt(vport) || get_job_ulpstatus(phba, rspiocb)) {
if (cmd != SLI_CTAS_DALLAPP_ID)
goto free_res;
}
/* Check for a CT LS_RJT response */
if (be16_to_cpu(rsp) == SLI_CT_RESPONSE_FS_RJT) {
if (cmd != SLI_CTAS_DALLAPP_ID)
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"3306 VMID FS_RJT Data: x%x x%x x%x\n",
cmd, ctrsp->ReasonCode,
ctrsp->Explanation);
if ((cmd != SLI_CTAS_DALLAPP_ID) ||
(ctrsp->ReasonCode != SLI_CT_UNABLE_TO_PERFORM_REQ) ||
(ctrsp->Explanation != SLI_CT_APP_ID_NOT_AVAILABLE)) {
/* If DALLAPP_ID failed retry later */
if (cmd == SLI_CTAS_DALLAPP_ID)
vport->load_flag |= FC_DEREGISTER_ALL_APP_ID;
goto free_res;
}
}
switch (cmd) {
case SLI_CTAS_RAPP_IDENT:
app = (struct app_id_object *)(RAPP_IDENT_OFFSET + data);
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"6712 RAPP_IDENT app id %d port id x%x id "
"len %d\n", be32_to_cpu(app->app_id),
be32_to_cpu(app->port_id),
app->obj.entity_id_len);
if (app->obj.entity_id_len == 0 || app->port_id == 0)
goto free_res;
hash = lpfc_vmid_hash_fn(app->obj.entity_id,
app->obj.entity_id_len);
vmp = lpfc_get_vmid_from_hashtable(vport, hash,
app->obj.entity_id);
if (vmp) {
write_lock(&vport->vmid_lock);
vmp->un.app_id = be32_to_cpu(app->app_id);
vmp->flag |= LPFC_VMID_REGISTERED;
vmp->flag &= ~LPFC_VMID_REQ_REGISTER;
write_unlock(&vport->vmid_lock);
/* Set IN USE flag */
vport->vmid_flag |= LPFC_VMID_IN_USE;
} else {
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"6901 No entry found %s hash %d\n",
app->obj.entity_id, hash);
}
break;
case SLI_CTAS_DAPP_IDENT:
app = (struct app_id_object *)(DAPP_IDENT_OFFSET + data);
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"6713 DAPP_IDENT app id %d port id x%x\n",
be32_to_cpu(app->app_id),
be32_to_cpu(app->port_id));
break;
case SLI_CTAS_DALLAPP_ID:
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"8856 Deregistered all app ids\n");
read_lock(&vport->vmid_lock);
for (i = 0; i < phba->cfg_max_vmid; i++) {
vmp = &vport->vmid[i];
if (vmp->flag != LPFC_VMID_SLOT_FREE)
memset(vmp, 0, sizeof(struct lpfc_vmid));
}
read_unlock(&vport->vmid_lock);
/* for all elements in the hash table */
if (!hash_empty(vport->hash_table))
hash_for_each(vport->hash_table, bucket, cur, hnode)
hash_del(&cur->hnode);
vport->load_flag |= FC_ALLOW_VMID;
break;
default:
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"8857 Invalid command code\n");
}
free_res:
lpfc_ct_free_iocb(phba, cmdiocb);
lpfc_nlp_put(ndlp);
}
/**
* lpfc_vmid_cmd - Build and send a FDMI cmd to the specified NPort
* @vport: pointer to a host virtual N_Port data structure.
* @cmdcode: application server command code to send
* @vmid: pointer to vmid info structure
*
* Builds and sends a FDMI command using the CT subsystem.
*/
int
lpfc_vmid_cmd(struct lpfc_vport *vport,
int cmdcode, struct lpfc_vmid *vmid)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_dmabuf *mp, *bmp;
struct lpfc_sli_ct_request *ctreq;
struct ulp_bde64 *bpl;
u32 size;
u32 rsp_size;
u8 *data;
struct lpfc_vmid_rapp_ident_list *rap;
struct lpfc_vmid_dapp_ident_list *dap;
u8 retry = 0;
struct lpfc_nodelist *ndlp;
void (*cmpl)(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb);
ndlp = lpfc_findnode_did(vport, FDMI_DID);
if (!ndlp || ndlp->nlp_state != NLP_STE_UNMAPPED_NODE)
return 0;
cmpl = lpfc_cmpl_ct_cmd_vmid;
/* fill in BDEs for command */
/* Allocate buffer for command payload */
mp = kmalloc(sizeof(*mp), GFP_KERNEL);
if (!mp)
goto vmid_free_mp_exit;
mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
if (!mp->virt)
goto vmid_free_mp_virt_exit;
/* Allocate buffer for Buffer ptr list */
bmp = kmalloc(sizeof(*bmp), GFP_KERNEL);
if (!bmp)
goto vmid_free_bmp_exit;
bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys);
if (!bmp->virt)
goto vmid_free_bmp_virt_exit;
INIT_LIST_HEAD(&mp->list);
INIT_LIST_HEAD(&bmp->list);
lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY,
"3275 VMID Request Data: x%x x%x x%x\n",
vport->fc_flag, vport->port_state, cmdcode);
ctreq = (struct lpfc_sli_ct_request *)mp->virt;
data = mp->virt;
/* First populate the CT_IU preamble */
memset(data, 0, LPFC_BPL_SIZE);
ctreq->RevisionId.bits.Revision = SLI_CT_REVISION;
ctreq->RevisionId.bits.InId = 0;
ctreq->FsType = SLI_CT_MANAGEMENT_SERVICE;
ctreq->FsSubType = SLI_CT_APP_SEV_Subtypes;
ctreq->CommandResponse.bits.CmdRsp = cpu_to_be16(cmdcode);
rsp_size = LPFC_BPL_SIZE;
size = 0;
switch (cmdcode) {
case SLI_CTAS_RAPP_IDENT:
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"1329 RAPP_IDENT for %s\n", vmid->host_vmid);
ctreq->un.PortID = cpu_to_be32(vport->fc_myDID);
rap = (struct lpfc_vmid_rapp_ident_list *)
(DAPP_IDENT_OFFSET + data);
rap->no_of_objects = cpu_to_be32(1);
rap->obj[0].entity_id_len = vmid->vmid_len;
memcpy(rap->obj[0].entity_id, vmid->host_vmid, vmid->vmid_len);
size = RAPP_IDENT_OFFSET +
struct_size(rap, obj, be32_to_cpu(rap->no_of_objects));
retry = 1;
break;
case SLI_CTAS_GALLAPPIA_ID:
ctreq->un.PortID = cpu_to_be32(vport->fc_myDID);
size = GALLAPPIA_ID_SIZE;
break;
case SLI_CTAS_DAPP_IDENT:
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"1469 DAPP_IDENT for %s\n", vmid->host_vmid);
ctreq->un.PortID = cpu_to_be32(vport->fc_myDID);
dap = (struct lpfc_vmid_dapp_ident_list *)
(DAPP_IDENT_OFFSET + data);
dap->no_of_objects = cpu_to_be32(1);
dap->obj[0].entity_id_len = vmid->vmid_len;
memcpy(dap->obj[0].entity_id, vmid->host_vmid, vmid->vmid_len);
size = DAPP_IDENT_OFFSET +
struct_size(dap, obj, be32_to_cpu(dap->no_of_objects));
write_lock(&vport->vmid_lock);
vmid->flag &= ~LPFC_VMID_REGISTERED;
write_unlock(&vport->vmid_lock);
retry = 1;
break;
case SLI_CTAS_DALLAPP_ID:
ctreq->un.PortID = cpu_to_be32(vport->fc_myDID);
size = DALLAPP_ID_SIZE;
break;
default:
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"7062 VMID cmdcode x%x not supported\n",
cmdcode);
goto vmid_free_all_mem;
}
ctreq->CommandResponse.bits.Size = cpu_to_be16(rsp_size);
bpl = (struct ulp_bde64 *)bmp->virt;
bpl->addrHigh = putPaddrHigh(mp->phys);
bpl->addrLow = putPaddrLow(mp->phys);
bpl->tus.f.bdeFlags = 0;
bpl->tus.f.bdeSize = size;
/* The lpfc_ct_cmd/lpfc_get_req shall increment ndlp reference count
* to hold ndlp reference for the corresponding callback function.
*/
if (!lpfc_ct_cmd(vport, mp, bmp, ndlp, cmpl, rsp_size, retry))
return 0;
vmid_free_all_mem:
lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
vmid_free_bmp_virt_exit:
kfree(bmp);
vmid_free_bmp_exit:
lpfc_mbuf_free(phba, mp->virt, mp->phys);
vmid_free_mp_virt_exit:
kfree(mp);
vmid_free_mp_exit:
/* Issue CT request failed */
lpfc_printf_vlog(vport, KERN_DEBUG, LOG_DISCOVERY,
"3276 VMID CT request failed Data: x%x\n", cmdcode);
return -EIO;
}