linux/net/mptcp/protocol.c

3790 lines
94 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/* Multipath TCP
*
* Copyright (c) 2017 - 2019, Intel Corporation.
*/
#define pr_fmt(fmt) "MPTCP: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/sched/signal.h>
#include <linux/atomic.h>
#include <net/sock.h>
#include <net/inet_common.h>
#include <net/inet_hashtables.h>
#include <net/protocol.h>
#include <net/tcp.h>
#include <net/tcp_states.h>
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
#include <net/transp_v6.h>
#endif
#include <net/mptcp.h>
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
#include <net/xfrm.h>
#include <asm/ioctls.h>
#include "protocol.h"
#include "mib.h"
#define CREATE_TRACE_POINTS
#include <trace/events/mptcp.h>
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
struct mptcp6_sock {
struct mptcp_sock msk;
struct ipv6_pinfo np;
};
#endif
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
struct mptcp_skb_cb {
u64 map_seq;
u64 end_seq;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
u32 offset;
u8 has_rxtstamp:1;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
};
#define MPTCP_SKB_CB(__skb) ((struct mptcp_skb_cb *)&((__skb)->cb[0]))
enum {
MPTCP_CMSG_TS = BIT(0),
MPTCP_CMSG_INQ = BIT(1),
};
static struct percpu_counter mptcp_sockets_allocated ____cacheline_aligned_in_smp;
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
static void __mptcp_destroy_sock(struct sock *sk);
static void __mptcp_check_send_data_fin(struct sock *sk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
DEFINE_PER_CPU(struct mptcp_delegated_action, mptcp_delegated_actions);
static struct net_device mptcp_napi_dev;
/* If msk has an initial subflow socket, and the MP_CAPABLE handshake has not
* completed yet or has failed, return the subflow socket.
* Otherwise return NULL.
*/
struct socket *__mptcp_nmpc_socket(const struct mptcp_sock *msk)
{
if (!msk->subflow || READ_ONCE(msk->can_ack))
return NULL;
return msk->subflow;
}
/* Returns end sequence number of the receiver's advertised window */
static u64 mptcp_wnd_end(const struct mptcp_sock *msk)
{
return READ_ONCE(msk->wnd_end);
}
static bool mptcp_is_tcpsk(struct sock *sk)
mptcp: fix tcp fallback crash Christoph Paasch reports following crash: general protection fault [..] CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62 RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471 [..] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] spin_lock_bh include/linux/spinlock.h:343 [inline] __mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278 mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882 [..] Problem is that mptcp_shutdown() socket isn't an mptcp socket, its a plain tcp_sk. Thus, trying to access mptcp_sk specific members accesses garbage. Root cause is that accept() returns a fallback (tcp) socket, not an mptcp one. There is code in getpeername to detect this and override the sockets stream_ops. But this will only run when accept() caller provided a sockaddr struct. "accept(fd, NULL, 0)" will therefore result in mptcp stream ops, but with sock->sk pointing at a tcp_sk. Update the existing fallback handling to detect this as well. Moreover, mptcp_shutdown did not have fallback handling, and mptcp_poll did it too late so add that there as well. Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02 19:44:51 +08:00
{
struct socket *sock = sk->sk_socket;
if (unlikely(sk->sk_prot == &tcp_prot)) {
/* we are being invoked after mptcp_accept() has
* accepted a non-mp-capable flow: sk is a tcp_sk,
* not an mptcp one.
*
* Hand the socket over to tcp so all further socket ops
* bypass mptcp.
*/
sock->ops = &inet_stream_ops;
return true;
mptcp: fix tcp fallback crash Christoph Paasch reports following crash: general protection fault [..] CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62 RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471 [..] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] spin_lock_bh include/linux/spinlock.h:343 [inline] __mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278 mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882 [..] Problem is that mptcp_shutdown() socket isn't an mptcp socket, its a plain tcp_sk. Thus, trying to access mptcp_sk specific members accesses garbage. Root cause is that accept() returns a fallback (tcp) socket, not an mptcp one. There is code in getpeername to detect this and override the sockets stream_ops. But this will only run when accept() caller provided a sockaddr struct. "accept(fd, NULL, 0)" will therefore result in mptcp stream ops, but with sock->sk pointing at a tcp_sk. Update the existing fallback handling to detect this as well. Moreover, mptcp_shutdown did not have fallback handling, and mptcp_poll did it too late so add that there as well. Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02 19:44:51 +08:00
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
} else if (unlikely(sk->sk_prot == &tcpv6_prot)) {
sock->ops = &inet6_stream_ops;
return true;
mptcp: fix tcp fallback crash Christoph Paasch reports following crash: general protection fault [..] CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62 RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471 [..] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] spin_lock_bh include/linux/spinlock.h:343 [inline] __mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278 mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882 [..] Problem is that mptcp_shutdown() socket isn't an mptcp socket, its a plain tcp_sk. Thus, trying to access mptcp_sk specific members accesses garbage. Root cause is that accept() returns a fallback (tcp) socket, not an mptcp one. There is code in getpeername to detect this and override the sockets stream_ops. But this will only run when accept() caller provided a sockaddr struct. "accept(fd, NULL, 0)" will therefore result in mptcp stream ops, but with sock->sk pointing at a tcp_sk. Update the existing fallback handling to detect this as well. Moreover, mptcp_shutdown did not have fallback handling, and mptcp_poll did it too late so add that there as well. Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02 19:44:51 +08:00
#endif
}
return false;
mptcp: fix tcp fallback crash Christoph Paasch reports following crash: general protection fault [..] CPU: 0 PID: 2874 Comm: syz-executor072 Not tainted 5.6.0-rc5 #62 RIP: 0010:__pv_queued_spin_lock_slowpath kernel/locking/qspinlock.c:471 [..] queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:50 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] spin_lock_bh include/linux/spinlock.h:343 [inline] __mptcp_flush_join_list+0x44/0xb0 net/mptcp/protocol.c:278 mptcp_shutdown+0xb3/0x230 net/mptcp/protocol.c:1882 [..] Problem is that mptcp_shutdown() socket isn't an mptcp socket, its a plain tcp_sk. Thus, trying to access mptcp_sk specific members accesses garbage. Root cause is that accept() returns a fallback (tcp) socket, not an mptcp one. There is code in getpeername to detect this and override the sockets stream_ops. But this will only run when accept() caller provided a sockaddr struct. "accept(fd, NULL, 0)" will therefore result in mptcp stream ops, but with sock->sk pointing at a tcp_sk. Update the existing fallback handling to detect this as well. Moreover, mptcp_shutdown did not have fallback handling, and mptcp_poll did it too late so add that there as well. Reported-by: Christoph Paasch <cpaasch@apple.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-02 19:44:51 +08:00
}
static int __mptcp_socket_create(struct mptcp_sock *msk)
{
struct mptcp_subflow_context *subflow;
struct sock *sk = (struct sock *)msk;
struct socket *ssock;
int err;
err = mptcp_subflow_create_socket(sk, &ssock);
if (err)
return err;
msk->first = ssock->sk;
msk->subflow = ssock;
subflow = mptcp_subflow_ctx(ssock->sk);
list_add(&subflow->node, &msk->conn_list);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sock_hold(ssock->sk);
subflow->request_mptcp = 1;
/* This is the first subflow, always with id 0 */
subflow->local_id_valid = 1;
mptcp_sock_graft(msk->first, sk->sk_socket);
return 0;
}
static void mptcp_drop(struct sock *sk, struct sk_buff *skb)
{
sk_drops_add(sk, skb);
__kfree_skb(skb);
}
static void mptcp_rmem_charge(struct sock *sk, int size)
{
mptcp_sk(sk)->rmem_fwd_alloc -= size;
}
static bool mptcp_try_coalesce(struct sock *sk, struct sk_buff *to,
struct sk_buff *from)
{
bool fragstolen;
int delta;
if (MPTCP_SKB_CB(from)->offset ||
!skb_try_coalesce(to, from, &fragstolen, &delta))
return false;
pr_debug("colesced seq %llx into %llx new len %d new end seq %llx",
MPTCP_SKB_CB(from)->map_seq, MPTCP_SKB_CB(to)->map_seq,
to->len, MPTCP_SKB_CB(from)->end_seq);
MPTCP_SKB_CB(to)->end_seq = MPTCP_SKB_CB(from)->end_seq;
kfree_skb_partial(from, fragstolen);
atomic_add(delta, &sk->sk_rmem_alloc);
mptcp_rmem_charge(sk, delta);
return true;
}
static bool mptcp_ooo_try_coalesce(struct mptcp_sock *msk, struct sk_buff *to,
struct sk_buff *from)
{
if (MPTCP_SKB_CB(from)->map_seq != MPTCP_SKB_CB(to)->end_seq)
return false;
return mptcp_try_coalesce((struct sock *)msk, to, from);
}
static void __mptcp_rmem_reclaim(struct sock *sk, int amount)
{
amount >>= SK_MEM_QUANTUM_SHIFT;
mptcp_sk(sk)->rmem_fwd_alloc -= amount << SK_MEM_QUANTUM_SHIFT;
__sk_mem_reduce_allocated(sk, amount);
}
static void mptcp_rmem_uncharge(struct sock *sk, int size)
{
struct mptcp_sock *msk = mptcp_sk(sk);
int reclaimable;
msk->rmem_fwd_alloc += size;
reclaimable = msk->rmem_fwd_alloc - sk_unused_reserved_mem(sk);
/* see sk_mem_uncharge() for the rationale behind the following schema */
if (unlikely(reclaimable >= SK_RECLAIM_THRESHOLD))
__mptcp_rmem_reclaim(sk, SK_RECLAIM_CHUNK);
}
static void mptcp_rfree(struct sk_buff *skb)
{
unsigned int len = skb->truesize;
struct sock *sk = skb->sk;
atomic_sub(len, &sk->sk_rmem_alloc);
mptcp_rmem_uncharge(sk, len);
}
static void mptcp_set_owner_r(struct sk_buff *skb, struct sock *sk)
{
skb_orphan(skb);
skb->sk = sk;
skb->destructor = mptcp_rfree;
atomic_add(skb->truesize, &sk->sk_rmem_alloc);
mptcp_rmem_charge(sk, skb->truesize);
}
/* "inspired" by tcp_data_queue_ofo(), main differences:
* - use mptcp seqs
* - don't cope with sacks
*/
static void mptcp_data_queue_ofo(struct mptcp_sock *msk, struct sk_buff *skb)
{
struct sock *sk = (struct sock *)msk;
struct rb_node **p, *parent;
u64 seq, end_seq, max_seq;
struct sk_buff *skb1;
seq = MPTCP_SKB_CB(skb)->map_seq;
end_seq = MPTCP_SKB_CB(skb)->end_seq;
max_seq = READ_ONCE(msk->rcv_wnd_sent);
pr_debug("msk=%p seq=%llx limit=%llx empty=%d", msk, seq, max_seq,
RB_EMPTY_ROOT(&msk->out_of_order_queue));
if (after64(end_seq, max_seq)) {
/* out of window */
mptcp_drop(sk, skb);
pr_debug("oow by %lld, rcv_wnd_sent %llu\n",
(unsigned long long)end_seq - (unsigned long)max_seq,
(unsigned long long)msk->rcv_wnd_sent);
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_NODSSWINDOW);
return;
}
p = &msk->out_of_order_queue.rb_node;
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_OFOQUEUE);
if (RB_EMPTY_ROOT(&msk->out_of_order_queue)) {
rb_link_node(&skb->rbnode, NULL, p);
rb_insert_color(&skb->rbnode, &msk->out_of_order_queue);
msk->ooo_last_skb = skb;
goto end;
}
/* with 2 subflows, adding at end of ooo queue is quite likely
* Use of ooo_last_skb avoids the O(Log(N)) rbtree lookup.
*/
if (mptcp_ooo_try_coalesce(msk, msk->ooo_last_skb, skb)) {
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_OFOMERGE);
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_OFOQUEUETAIL);
return;
}
/* Can avoid an rbtree lookup if we are adding skb after ooo_last_skb */
if (!before64(seq, MPTCP_SKB_CB(msk->ooo_last_skb)->end_seq)) {
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_OFOQUEUETAIL);
parent = &msk->ooo_last_skb->rbnode;
p = &parent->rb_right;
goto insert;
}
/* Find place to insert this segment. Handle overlaps on the way. */
parent = NULL;
while (*p) {
parent = *p;
skb1 = rb_to_skb(parent);
if (before64(seq, MPTCP_SKB_CB(skb1)->map_seq)) {
p = &parent->rb_left;
continue;
}
if (before64(seq, MPTCP_SKB_CB(skb1)->end_seq)) {
if (!after64(end_seq, MPTCP_SKB_CB(skb1)->end_seq)) {
/* All the bits are present. Drop. */
mptcp_drop(sk, skb);
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA);
return;
}
if (after64(seq, MPTCP_SKB_CB(skb1)->map_seq)) {
/* partial overlap:
* | skb |
* | skb1 |
* continue traversing
*/
} else {
/* skb's seq == skb1's seq and skb covers skb1.
* Replace skb1 with skb.
*/
rb_replace_node(&skb1->rbnode, &skb->rbnode,
&msk->out_of_order_queue);
mptcp_drop(sk, skb1);
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA);
goto merge_right;
}
} else if (mptcp_ooo_try_coalesce(msk, skb1, skb)) {
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_OFOMERGE);
return;
}
p = &parent->rb_right;
}
insert:
/* Insert segment into RB tree. */
rb_link_node(&skb->rbnode, parent, p);
rb_insert_color(&skb->rbnode, &msk->out_of_order_queue);
merge_right:
/* Remove other segments covered by skb. */
while ((skb1 = skb_rb_next(skb)) != NULL) {
if (before64(end_seq, MPTCP_SKB_CB(skb1)->end_seq))
break;
rb_erase(&skb1->rbnode, &msk->out_of_order_queue);
mptcp_drop(sk, skb1);
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA);
}
/* If there is no skb after us, we are the last_skb ! */
if (!skb1)
msk->ooo_last_skb = skb;
end:
skb_condense(skb);
mptcp_set_owner_r(skb, sk);
}
static bool mptcp_rmem_schedule(struct sock *sk, struct sock *ssk, int size)
{
struct mptcp_sock *msk = mptcp_sk(sk);
int amt, amount;
if (size < msk->rmem_fwd_alloc)
return true;
amt = sk_mem_pages(size);
amount = amt << SK_MEM_QUANTUM_SHIFT;
msk->rmem_fwd_alloc += amount;
if (!__sk_mem_raise_allocated(sk, size, amt, SK_MEM_RECV)) {
if (ssk->sk_forward_alloc < amount) {
msk->rmem_fwd_alloc -= amount;
return false;
}
ssk->sk_forward_alloc -= amount;
}
return true;
}
static bool __mptcp_move_skb(struct mptcp_sock *msk, struct sock *ssk,
struct sk_buff *skb, unsigned int offset,
size_t copy_len)
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
{
struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
struct sock *sk = (struct sock *)msk;
struct sk_buff *tail;
bool has_rxtstamp;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
__skb_unlink(skb, &ssk->sk_receive_queue);
skb_ext_reset(skb);
skb_orphan(skb);
/* try to fetch required memory from subflow */
if (!mptcp_rmem_schedule(sk, ssk, skb->truesize))
goto drop;
has_rxtstamp = TCP_SKB_CB(skb)->has_rxtstamp;
/* the skb map_seq accounts for the skb offset:
* mptcp_subflow_get_mapped_dsn() is based on the current tp->copied_seq
* value
*/
MPTCP_SKB_CB(skb)->map_seq = mptcp_subflow_get_mapped_dsn(subflow);
MPTCP_SKB_CB(skb)->end_seq = MPTCP_SKB_CB(skb)->map_seq + copy_len;
MPTCP_SKB_CB(skb)->offset = offset;
MPTCP_SKB_CB(skb)->has_rxtstamp = has_rxtstamp;
if (MPTCP_SKB_CB(skb)->map_seq == msk->ack_seq) {
/* in sequence */
WRITE_ONCE(msk->ack_seq, msk->ack_seq + copy_len);
tail = skb_peek_tail(&sk->sk_receive_queue);
if (tail && mptcp_try_coalesce(sk, tail, skb))
return true;
mptcp_set_owner_r(skb, sk);
__skb_queue_tail(&sk->sk_receive_queue, skb);
return true;
} else if (after64(MPTCP_SKB_CB(skb)->map_seq, msk->ack_seq)) {
mptcp_data_queue_ofo(msk, skb);
return false;
}
/* old data, keep it simple and drop the whole pkt, sender
* will retransmit as needed, if needed.
*/
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA);
drop:
mptcp_drop(sk, skb);
return false;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
}
static void mptcp_stop_timer(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
sk_stop_timer(sk, &icsk->icsk_retransmit_timer);
mptcp_sk(sk)->timer_ival = 0;
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
static void mptcp_close_wake_up(struct sock *sk)
{
if (sock_flag(sk, SOCK_DEAD))
return;
sk->sk_state_change(sk);
if (sk->sk_shutdown == SHUTDOWN_MASK ||
sk->sk_state == TCP_CLOSE)
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_HUP);
else
sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
}
static bool mptcp_pending_data_fin_ack(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
return !__mptcp_check_fallback(msk) &&
((1 << sk->sk_state) &
(TCPF_FIN_WAIT1 | TCPF_CLOSING | TCPF_LAST_ACK)) &&
msk->write_seq == READ_ONCE(msk->snd_una);
}
static void mptcp_check_data_fin_ack(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
/* Look for an acknowledged DATA_FIN */
if (mptcp_pending_data_fin_ack(sk)) {
WRITE_ONCE(msk->snd_data_fin_enable, 0);
switch (sk->sk_state) {
case TCP_FIN_WAIT1:
inet_sk_state_store(sk, TCP_FIN_WAIT2);
break;
case TCP_CLOSING:
case TCP_LAST_ACK:
inet_sk_state_store(sk, TCP_CLOSE);
break;
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
mptcp_close_wake_up(sk);
}
}
static bool mptcp_pending_data_fin(struct sock *sk, u64 *seq)
{
struct mptcp_sock *msk = mptcp_sk(sk);
if (READ_ONCE(msk->rcv_data_fin) &&
((1 << sk->sk_state) &
(TCPF_ESTABLISHED | TCPF_FIN_WAIT1 | TCPF_FIN_WAIT2))) {
u64 rcv_data_fin_seq = READ_ONCE(msk->rcv_data_fin_seq);
if (msk->ack_seq == rcv_data_fin_seq) {
if (seq)
*seq = rcv_data_fin_seq;
return true;
}
}
return false;
}
static void mptcp_set_datafin_timeout(const struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
mptcp: Correctly set DATA_FIN timeout when number of retransmits is large Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39e62c ("mptcp: Retransmit DATA_FIN") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25 08:52:59 +08:00
u32 retransmits;
mptcp: Correctly set DATA_FIN timeout when number of retransmits is large Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39e62c ("mptcp: Retransmit DATA_FIN") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25 08:52:59 +08:00
retransmits = min_t(u32, icsk->icsk_retransmits,
ilog2(TCP_RTO_MAX / TCP_RTO_MIN));
mptcp_sk(sk)->timer_ival = TCP_RTO_MIN << retransmits;
}
static void __mptcp_set_timeout(struct sock *sk, long tout)
{
mptcp_sk(sk)->timer_ival = tout > 0 ? tout : TCP_RTO_MIN;
}
static long mptcp_timeout_from_subflow(const struct mptcp_subflow_context *subflow)
{
const struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
return inet_csk(ssk)->icsk_pending && !subflow->stale_count ?
inet_csk(ssk)->icsk_timeout - jiffies : 0;
}
static void mptcp_set_timeout(struct sock *sk)
{
struct mptcp_subflow_context *subflow;
long tout = 0;
mptcp_for_each_subflow(mptcp_sk(sk), subflow)
tout = max(tout, mptcp_timeout_from_subflow(subflow));
__mptcp_set_timeout(sk, tout);
}
static bool tcp_can_send_ack(const struct sock *ssk)
{
return !((1 << inet_sk_state_load(ssk)) &
(TCPF_SYN_SENT | TCPF_SYN_RECV | TCPF_TIME_WAIT | TCPF_CLOSE | TCPF_LISTEN));
}
mptcp: Only send extra TCP acks in eligible socket states Recent changes exposed a bug where specifically-timed requests to the path manager netlink API could trigger a divide-by-zero in __tcp_select_window(), as syzkaller does: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 9667 Comm: syz-executor.0 Not tainted 5.14.0-rc6+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:__tcp_select_window+0x509/0xa60 net/ipv4/tcp_output.c:3016 Code: 44 89 ff e8 c9 29 e9 fd 45 39 e7 0f 8d 20 ff ff ff e8 db 28 e9 fd 44 89 e3 e9 13 ff ff ff e8 ce 28 e9 fd 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 b7 28 e9 fd 44 89 f1 48 89 ea RSP: 0018:ffff888031ccf020 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000040000 RDX: 0000000000000000 RSI: ffff88811532c080 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffffffff835807c2 R09: 0000000000000000 R10: 0000000000000004 R11: ffffed1020b92441 R12: 0000000000000000 R13: 1ffff11006399e08 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fa4c8344700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f424000 CR3: 000000003e4e2003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: tcp_select_window net/ipv4/tcp_output.c:264 [inline] __tcp_transmit_skb+0xc00/0x37a0 net/ipv4/tcp_output.c:1351 __tcp_send_ack.part.0+0x3ec/0x760 net/ipv4/tcp_output.c:3972 __tcp_send_ack net/ipv4/tcp_output.c:3978 [inline] tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3978 mptcp_pm_nl_addr_send_ack+0x1ab/0x380 net/mptcp/pm_netlink.c:654 mptcp_pm_remove_addr+0x161/0x200 net/mptcp/pm.c:58 mptcp_nl_remove_id_zero_address+0x197/0x460 net/mptcp/pm_netlink.c:1328 mptcp_nl_cmd_del_addr+0x98b/0xd40 net/mptcp/pm_netlink.c:1359 genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0x14e/0x190 net/socket.c:724 ____sys_sendmsg+0x709/0x870 net/socket.c:2403 ___sys_sendmsg+0xff/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae mptcp_pm_nl_addr_send_ack() was attempting to send a TCP ACK on the first subflow in the MPTCP socket's connection list without validating that the subflow was in a suitable connection state. To address this, always validate subflow state when sending extra ACKs on subflows for address advertisement or subflow priority change. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/229 Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-03 02:51:19 +08:00
void mptcp_subflow_send_ack(struct sock *ssk)
{
bool slow;
slow = lock_sock_fast(ssk);
if (tcp_can_send_ack(ssk))
tcp_send_ack(ssk);
unlock_sock_fast(ssk, slow);
}
static void mptcp_send_ack(struct mptcp_sock *msk)
{
struct mptcp_subflow_context *subflow;
mptcp: Only send extra TCP acks in eligible socket states Recent changes exposed a bug where specifically-timed requests to the path manager netlink API could trigger a divide-by-zero in __tcp_select_window(), as syzkaller does: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 PID: 9667 Comm: syz-executor.0 Not tainted 5.14.0-rc6+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:__tcp_select_window+0x509/0xa60 net/ipv4/tcp_output.c:3016 Code: 44 89 ff e8 c9 29 e9 fd 45 39 e7 0f 8d 20 ff ff ff e8 db 28 e9 fd 44 89 e3 e9 13 ff ff ff e8 ce 28 e9 fd 44 89 e0 44 89 e3 99 <f7> 7c 24 04 29 d3 e9 fc fe ff ff e8 b7 28 e9 fd 44 89 f1 48 89 ea RSP: 0018:ffff888031ccf020 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000040000 RDX: 0000000000000000 RSI: ffff88811532c080 RDI: 0000000000000002 RBP: 0000000000000000 R08: ffffffff835807c2 R09: 0000000000000000 R10: 0000000000000004 R11: ffffed1020b92441 R12: 0000000000000000 R13: 1ffff11006399e08 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fa4c8344700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f424000 CR3: 000000003e4e2003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: tcp_select_window net/ipv4/tcp_output.c:264 [inline] __tcp_transmit_skb+0xc00/0x37a0 net/ipv4/tcp_output.c:1351 __tcp_send_ack.part.0+0x3ec/0x760 net/ipv4/tcp_output.c:3972 __tcp_send_ack net/ipv4/tcp_output.c:3978 [inline] tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3978 mptcp_pm_nl_addr_send_ack+0x1ab/0x380 net/mptcp/pm_netlink.c:654 mptcp_pm_remove_addr+0x161/0x200 net/mptcp/pm.c:58 mptcp_nl_remove_id_zero_address+0x197/0x460 net/mptcp/pm_netlink.c:1328 mptcp_nl_cmd_del_addr+0x98b/0xd40 net/mptcp/pm_netlink.c:1359 genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0x14e/0x190 net/socket.c:724 ____sys_sendmsg+0x709/0x870 net/socket.c:2403 ___sys_sendmsg+0xff/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae mptcp_pm_nl_addr_send_ack() was attempting to send a TCP ACK on the first subflow in the MPTCP socket's connection list without validating that the subflow was in a suitable connection state. To address this, always validate subflow state when sending extra ACKs on subflows for address advertisement or subflow priority change. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/229 Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-03 02:51:19 +08:00
mptcp_for_each_subflow(msk, subflow)
mptcp_subflow_send_ack(mptcp_subflow_tcp_sock(subflow));
}
static void mptcp_subflow_cleanup_rbuf(struct sock *ssk)
{
bool slow;
slow = lock_sock_fast(ssk);
if (tcp_can_send_ack(ssk))
tcp_cleanup_rbuf(ssk, 1);
unlock_sock_fast(ssk, slow);
}
static bool mptcp_subflow_could_cleanup(const struct sock *ssk, bool rx_empty)
{
const struct inet_connection_sock *icsk = inet_csk(ssk);
u8 ack_pending = READ_ONCE(icsk->icsk_ack.pending);
const struct tcp_sock *tp = tcp_sk(ssk);
return (ack_pending & ICSK_ACK_SCHED) &&
((READ_ONCE(tp->rcv_nxt) - READ_ONCE(tp->rcv_wup) >
READ_ONCE(icsk->icsk_ack.rcv_mss)) ||
(rx_empty && ack_pending &
(ICSK_ACK_PUSHED2 | ICSK_ACK_PUSHED)));
}
static void mptcp_cleanup_rbuf(struct mptcp_sock *msk)
{
int old_space = READ_ONCE(msk->old_wspace);
struct mptcp_subflow_context *subflow;
struct sock *sk = (struct sock *)msk;
int space = __mptcp_space(sk);
bool cleanup, rx_empty;
cleanup = (space > 0) && (space >= (old_space << 1));
rx_empty = !__mptcp_rmem(sk);
mptcp_for_each_subflow(msk, subflow) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
if (cleanup || mptcp_subflow_could_cleanup(ssk, rx_empty))
mptcp_subflow_cleanup_rbuf(ssk);
}
}
static bool mptcp_check_data_fin(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
u64 rcv_data_fin_seq;
bool ret = false;
if (__mptcp_check_fallback(msk))
return ret;
/* Need to ack a DATA_FIN received from a peer while this side
* of the connection is in ESTABLISHED, FIN_WAIT1, or FIN_WAIT2.
* msk->rcv_data_fin was set when parsing the incoming options
* at the subflow level and the msk lock was not held, so this
* is the first opportunity to act on the DATA_FIN and change
* the msk state.
*
* If we are caught up to the sequence number of the incoming
* DATA_FIN, send the DATA_ACK now and do state transition. If
* not caught up, do nothing and let the recv code send DATA_ACK
* when catching up.
*/
if (mptcp_pending_data_fin(sk, &rcv_data_fin_seq)) {
WRITE_ONCE(msk->ack_seq, msk->ack_seq + 1);
WRITE_ONCE(msk->rcv_data_fin, 0);
sk->sk_shutdown |= RCV_SHUTDOWN;
smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
switch (sk->sk_state) {
case TCP_ESTABLISHED:
inet_sk_state_store(sk, TCP_CLOSE_WAIT);
break;
case TCP_FIN_WAIT1:
inet_sk_state_store(sk, TCP_CLOSING);
break;
case TCP_FIN_WAIT2:
inet_sk_state_store(sk, TCP_CLOSE);
break;
default:
/* Other states not expected */
WARN_ON_ONCE(1);
break;
}
ret = true;
mptcp_send_ack(msk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
mptcp_close_wake_up(sk);
}
return ret;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
static bool __mptcp_move_skbs_from_subflow(struct mptcp_sock *msk,
struct sock *ssk,
unsigned int *bytes)
{
struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
struct sock *sk = (struct sock *)msk;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
unsigned int moved = 0;
bool more_data_avail;
struct tcp_sock *tp;
bool done = false;
int sk_rbuf;
sk_rbuf = READ_ONCE(sk->sk_rcvbuf);
if (!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
int ssk_rbuf = READ_ONCE(ssk->sk_rcvbuf);
if (unlikely(ssk_rbuf > sk_rbuf)) {
WRITE_ONCE(sk->sk_rcvbuf, ssk_rbuf);
sk_rbuf = ssk_rbuf;
}
}
pr_debug("msk=%p ssk=%p", msk, ssk);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
tp = tcp_sk(ssk);
do {
u32 map_remaining, offset;
u32 seq = tp->copied_seq;
struct sk_buff *skb;
bool fin;
/* try to move as much data as available */
map_remaining = subflow->map_data_len -
mptcp_subflow_get_map_offset(subflow);
skb = skb_peek(&ssk->sk_receive_queue);
if (!skb) {
/* if no data is found, a racing workqueue/recvmsg
* already processed the new data, stop here or we
* can enter an infinite loop
*/
if (!moved)
done = true;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
break;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
if (__mptcp_check_fallback(msk)) {
/* if we are running under the workqueue, TCP could have
* collapsed skbs between dummy map creation and now
* be sure to adjust the size
*/
map_remaining = skb->len;
subflow->map_data_len = skb->len;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
offset = seq - TCP_SKB_CB(skb)->seq;
fin = TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN;
if (fin) {
done = true;
seq++;
}
if (offset < skb->len) {
size_t len = skb->len - offset;
if (tp->urg_data)
done = true;
if (__mptcp_move_skb(msk, ssk, skb, offset, len))
moved += len;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
seq += len;
if (WARN_ON_ONCE(map_remaining < len))
break;
} else {
WARN_ON_ONCE(!fin);
sk_eat_skb(ssk, skb);
done = true;
}
WRITE_ONCE(tp->copied_seq, seq);
more_data_avail = mptcp_subflow_data_available(ssk);
if (atomic_read(&sk->sk_rmem_alloc) > sk_rbuf) {
done = true;
break;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
} while (more_data_avail);
*bytes += moved;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
return done;
}
static bool __mptcp_ofo_queue(struct mptcp_sock *msk)
{
struct sock *sk = (struct sock *)msk;
struct sk_buff *skb, *tail;
bool moved = false;
struct rb_node *p;
u64 end_seq;
p = rb_first(&msk->out_of_order_queue);
pr_debug("msk=%p empty=%d", msk, RB_EMPTY_ROOT(&msk->out_of_order_queue));
while (p) {
skb = rb_to_skb(p);
if (after64(MPTCP_SKB_CB(skb)->map_seq, msk->ack_seq))
break;
p = rb_next(p);
rb_erase(&skb->rbnode, &msk->out_of_order_queue);
if (unlikely(!after64(MPTCP_SKB_CB(skb)->end_seq,
msk->ack_seq))) {
mptcp_drop(sk, skb);
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA);
continue;
}
end_seq = MPTCP_SKB_CB(skb)->end_seq;
tail = skb_peek_tail(&sk->sk_receive_queue);
if (!tail || !mptcp_ooo_try_coalesce(msk, tail, skb)) {
int delta = msk->ack_seq - MPTCP_SKB_CB(skb)->map_seq;
/* skip overlapping data, if any */
pr_debug("uncoalesced seq=%llx ack seq=%llx delta=%d",
MPTCP_SKB_CB(skb)->map_seq, msk->ack_seq,
delta);
MPTCP_SKB_CB(skb)->offset += delta;
MPTCP_SKB_CB(skb)->map_seq += delta;
__skb_queue_tail(&sk->sk_receive_queue, skb);
}
msk->ack_seq = end_seq;
moved = true;
}
return moved;
}
/* In most cases we will be able to lock the mptcp socket. If its already
* owned, we need to defer to the work queue to avoid ABBA deadlock.
*/
static bool move_skbs_to_msk(struct mptcp_sock *msk, struct sock *ssk)
{
struct sock *sk = (struct sock *)msk;
unsigned int moved = 0;
__mptcp_move_skbs_from_subflow(msk, ssk, &moved);
__mptcp_ofo_queue(msk);
mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. Reported-by: Maxim Galaganov <max@internet.ru> Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 06:59:44 +08:00
if (unlikely(ssk->sk_err)) {
if (!sock_owned_by_user(sk))
__mptcp_error_report(sk);
else
__set_bit(MPTCP_ERROR_REPORT, &msk->cb_flags);
mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. Reported-by: Maxim Galaganov <max@internet.ru> Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 06:59:44 +08:00
}
/* If the moves have caught up with the DATA_FIN sequence number
* it's time to ack the DATA_FIN and change socket state, but
* this is not a good place to change state. Let the workqueue
* do it.
*/
if (mptcp_pending_data_fin(sk, NULL))
mptcp_schedule_work(sk);
return moved > 0;
}
void mptcp_data_ready(struct sock *sk, struct sock *ssk)
{
struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
struct mptcp_sock *msk = mptcp_sk(sk);
int sk_rbuf, ssk_rbuf;
/* The peer can send data while we are shutting down this
* subflow at msk destruction time, but we must avoid enqueuing
* more data to the msk receive queue
*/
if (unlikely(subflow->disposable))
return;
ssk_rbuf = READ_ONCE(ssk->sk_rcvbuf);
sk_rbuf = READ_ONCE(sk->sk_rcvbuf);
if (unlikely(ssk_rbuf > sk_rbuf))
sk_rbuf = ssk_rbuf;
/* over limit? can't append more skbs to msk, Also, no need to wake-up*/
if (__mptcp_rmem(sk) > sk_rbuf) {
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_RCVPRUNED);
return;
}
/* Wake-up the reader only for in-sequence data */
mptcp_data_lock(sk);
mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 06:05:00 +08:00
if (move_skbs_to_msk(msk, ssk))
sk->sk_data_ready(sk);
mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 06:05:00 +08:00
mptcp_data_unlock(sk);
}
static bool __mptcp_finish_join(struct mptcp_sock *msk, struct sock *ssk)
{
struct sock *sk = (struct sock *)msk;
if (sk->sk_state != TCP_ESTABLISHED)
return false;
/* attach to msk socket only after we are sure we will deal with it
* at close time
*/
if (sk->sk_socket && !ssk->sk_socket)
mptcp_sock_graft(ssk, sk->sk_socket);
mptcp_propagate_sndbuf((struct sock *)msk, ssk);
mptcp_sockopt_sync_locked(msk, ssk);
return true;
}
static void __mptcp_flush_join_list(struct sock *sk)
{
struct mptcp_subflow_context *tmp, *subflow;
struct mptcp_sock *msk = mptcp_sk(sk);
list_for_each_entry_safe(subflow, tmp, &msk->join_list, node) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
bool slow = lock_sock_fast(ssk);
list_move_tail(&subflow->node, &msk->conn_list);
if (!__mptcp_finish_join(msk, ssk))
mptcp_subflow_reset(ssk);
unlock_sock_fast(ssk, slow);
}
}
static bool mptcp_timer_pending(struct sock *sk)
{
return timer_pending(&inet_csk(sk)->icsk_retransmit_timer);
}
static void mptcp_reset_timer(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
unsigned long tout;
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
/* prevent rescheduling on close */
if (unlikely(inet_sk_state_load(sk) == TCP_CLOSE))
return;
tout = mptcp_sk(sk)->timer_ival;
sk_reset_timer(sk, &icsk->icsk_retransmit_timer, jiffies + tout);
}
bool mptcp_schedule_work(struct sock *sk)
{
if (inet_sk_state_load(sk) != TCP_CLOSE &&
schedule_work(&mptcp_sk(sk)->work)) {
/* each subflow already holds a reference to the sk, and the
* workqueue is invoked by a subflow, so sk can't go away here.
*/
sock_hold(sk);
return true;
}
return false;
}
void mptcp_subflow_eof(struct sock *sk)
{
if (!test_and_set_bit(MPTCP_WORK_EOF, &mptcp_sk(sk)->flags))
mptcp_schedule_work(sk);
}
static void mptcp_check_for_eof(struct mptcp_sock *msk)
{
struct mptcp_subflow_context *subflow;
struct sock *sk = (struct sock *)msk;
int receivers = 0;
mptcp_for_each_subflow(msk, subflow)
receivers += !subflow->rx_eof;
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
if (receivers)
return;
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
if (!(sk->sk_shutdown & RCV_SHUTDOWN)) {
/* hopefully temporary hack: propagate shutdown status
* to msk, when all subflows agree on it
*/
sk->sk_shutdown |= RCV_SHUTDOWN;
smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
sk->sk_data_ready(sk);
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
switch (sk->sk_state) {
case TCP_ESTABLISHED:
inet_sk_state_store(sk, TCP_CLOSE_WAIT);
break;
case TCP_FIN_WAIT1:
inet_sk_state_store(sk, TCP_CLOSING);
break;
case TCP_FIN_WAIT2:
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
inet_sk_state_store(sk, TCP_CLOSE);
break;
default:
return;
}
mptcp_close_wake_up(sk);
}
static struct sock *mptcp_subflow_recv_lookup(const struct mptcp_sock *msk)
{
struct mptcp_subflow_context *subflow;
struct sock *sk = (struct sock *)msk;
sock_owned_by_me(sk);
mptcp_for_each_subflow(msk, subflow) {
if (READ_ONCE(subflow->data_avail))
return mptcp_subflow_tcp_sock(subflow);
}
return NULL;
}
static bool mptcp_skb_can_collapse_to(u64 write_seq,
const struct sk_buff *skb,
const struct mptcp_ext *mpext)
{
if (!tcp_skb_can_collapse_to(skb))
return false;
/* can collapse only if MPTCP level sequence is in order and this
* mapping has not been xmitted yet
*/
return mpext && mpext->data_seq + mpext->data_len == write_seq &&
!mpext->frozen;
}
/* we can append data to the given data frag if:
* - there is space available in the backing page_frag
* - the data frag tail matches the current page_frag free offset
* - the data frag end sequence number matches the current write seq
*/
static bool mptcp_frag_can_collapse_to(const struct mptcp_sock *msk,
const struct page_frag *pfrag,
const struct mptcp_data_frag *df)
{
return df && pfrag->page == df->page &&
pfrag->size - pfrag->offset > 0 &&
pfrag->offset == (df->offset + df->data_len) &&
df->data_seq + df->data_len == msk->write_seq;
}
static void __mptcp_mem_reclaim_partial(struct sock *sk)
{
int reclaimable = mptcp_sk(sk)->rmem_fwd_alloc - sk_unused_reserved_mem(sk);
lockdep_assert_held_once(&sk->sk_lock.slock);
mptcp: Check reclaim amount before reducing allocation syzbot found a page counter underflow that was triggered by MPTCP's reclaim code: page_counter underflow: -4294964789 nr_pages=4294967295 WARNING: CPU: 2 PID: 3785 at mm/page_counter.c:56 page_counter_cancel+0xcf/0xe0 mm/page_counter.c:56 Modules linked in: CPU: 2 PID: 3785 Comm: kworker/2:6 Not tainted 5.16.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:page_counter_cancel+0xcf/0xe0 mm/page_counter.c:56 Code: c7 04 24 00 00 00 00 45 31 f6 eb 97 e8 2a 2b b5 ff 4c 89 ea 48 89 ee 48 c7 c7 00 9e b8 89 c6 05 a0 c1 ba 0b 01 e8 95 e4 4b 07 <0f> 0b eb a8 4c 89 e7 e8 25 5a fb ff eb c7 0f 1f 00 41 56 41 55 49 RSP: 0018:ffffc90002d4f918 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff88806a494120 RCX: 0000000000000000 RDX: ffff8880688c41c0 RSI: ffffffff815e8f28 RDI: fffff520005a9f15 RBP: ffffffff000009cb R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815e2cfe R11: 0000000000000000 R12: ffff88806a494120 R13: 00000000ffffffff R14: 0000000000000000 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88802cc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de21000 CR3: 000000005ad59000 CR4: 0000000000150ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> page_counter_uncharge+0x2e/0x60 mm/page_counter.c:160 drain_stock+0xc1/0x180 mm/memcontrol.c:2219 refill_stock+0x139/0x2f0 mm/memcontrol.c:2271 __sk_mem_reduce_allocated+0x24d/0x550 net/core/sock.c:2945 __mptcp_rmem_reclaim net/mptcp/protocol.c:167 [inline] __mptcp_mem_reclaim_partial+0x124/0x410 net/mptcp/protocol.c:975 mptcp_mem_reclaim_partial net/mptcp/protocol.c:982 [inline] mptcp_alloc_tx_skb net/mptcp/protocol.c:1212 [inline] mptcp_sendmsg_frag+0x18c6/0x2190 net/mptcp/protocol.c:1279 __mptcp_push_pending+0x232/0x720 net/mptcp/protocol.c:1545 mptcp_release_cb+0xfe/0x200 net/mptcp/protocol.c:2975 release_sock+0xb4/0x1b0 net/core/sock.c:3306 mptcp_worker+0x51e/0xc10 net/mptcp/protocol.c:2443 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> __mptcp_mem_reclaim_partial() could call __mptcp_rmem_reclaim() with a negative value, which passed that negative value to __sk_mem_reduce_allocated() and triggered the splat above. Check for a reclaim amount that is positive and large enough for __mptcp_rmem_reclaim() to actually adjust rmem_fwd_alloc (much like the sk_mem_reclaim_partial() code the function is based on). v2: Use '>' instead of '>=', since SK_MEM_QUANTUM - 1 would get right-shifted into nothing by __mptcp_rmem_reclaim. Fixes: 6511882cdd82 ("mptcp: allocate fwd memory separately on the rx and tx path") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/252 Reported-and-tested-by: syzbot+bc9e2d2dbcb347dd215a@syzkaller.appspotmail.com Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-07 06:06:38 +08:00
if (reclaimable > SK_MEM_QUANTUM)
__mptcp_rmem_reclaim(sk, reclaimable - 1);
sk_mem_reclaim_partial(sk);
}
static void mptcp_mem_reclaim_partial(struct sock *sk)
{
mptcp_data_lock(sk);
__mptcp_mem_reclaim_partial(sk);
mptcp_data_unlock(sk);
}
static void dfrag_uncharge(struct sock *sk, int len)
{
sk_mem_uncharge(sk, len);
sk_wmem_queued_add(sk, -len);
}
static void dfrag_clear(struct sock *sk, struct mptcp_data_frag *dfrag)
{
int len = dfrag->data_len + dfrag->overhead;
list_del(&dfrag->list);
dfrag_uncharge(sk, len);
put_page(dfrag->page);
}
static void __mptcp_clean_una(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct mptcp_data_frag *dtmp, *dfrag;
bool cleaned = false;
u64 snd_una;
/* on fallback we just need to ignore snd_una, as this is really
* plain TCP
*/
if (__mptcp_check_fallback(msk))
msk->snd_una = READ_ONCE(msk->snd_nxt);
snd_una = msk->snd_una;
list_for_each_entry_safe(dfrag, dtmp, &msk->rtx_queue, list) {
if (after64(dfrag->data_seq + dfrag->data_len, snd_una))
break;
if (unlikely(dfrag == msk->first_pending)) {
/* in recovery mode can see ack after the current snd head */
if (WARN_ON_ONCE(!msk->recovery))
break;
WRITE_ONCE(msk->first_pending, mptcp_send_next(sk));
}
dfrag_clear(sk, dfrag);
cleaned = true;
}
dfrag = mptcp_rtx_head(sk);
if (dfrag && after64(snd_una, dfrag->data_seq)) {
u64 delta = snd_una - dfrag->data_seq;
/* prevent wrap around in recovery mode */
if (unlikely(delta > dfrag->already_sent)) {
if (WARN_ON_ONCE(!msk->recovery))
goto out;
if (WARN_ON_ONCE(delta > dfrag->data_len))
goto out;
dfrag->already_sent += delta - dfrag->already_sent;
}
dfrag->data_seq += delta;
dfrag->offset += delta;
dfrag->data_len -= delta;
dfrag->already_sent -= delta;
dfrag_uncharge(sk, delta);
cleaned = true;
}
/* all retransmitted data acked, recovery completed */
if (unlikely(msk->recovery) && after64(msk->snd_una, msk->recovery_snd_nxt))
msk->recovery = false;
out:
if (cleaned && tcp_under_memory_pressure(sk))
__mptcp_mem_reclaim_partial(sk);
if (snd_una == READ_ONCE(msk->snd_nxt) &&
snd_una == READ_ONCE(msk->write_seq)) {
if (mptcp_timer_pending(sk) && !mptcp_data_fin_enabled(msk))
mptcp_stop_timer(sk);
} else {
mptcp_reset_timer(sk);
}
}
static void __mptcp_clean_una_wakeup(struct sock *sk)
{
lockdep_assert_held_once(&sk->sk_lock.slock);
__mptcp_clean_una(sk);
mptcp_write_space(sk);
}
static void mptcp_clean_una_wakeup(struct sock *sk)
{
mptcp_data_lock(sk);
__mptcp_clean_una_wakeup(sk);
mptcp_data_unlock(sk);
}
static void mptcp_enter_memory_pressure(struct sock *sk)
{
struct mptcp_subflow_context *subflow;
struct mptcp_sock *msk = mptcp_sk(sk);
bool first = true;
sk_stream_moderate_sndbuf(sk);
mptcp_for_each_subflow(msk, subflow) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
if (first)
tcp_enter_memory_pressure(ssk);
sk_stream_moderate_sndbuf(ssk);
first = false;
}
}
/* ensure we get enough memory for the frag hdr, beyond some minimal amount of
* data
*/
static bool mptcp_page_frag_refill(struct sock *sk, struct page_frag *pfrag)
{
if (likely(skb_page_frag_refill(32U + sizeof(struct mptcp_data_frag),
pfrag, sk->sk_allocation)))
return true;
mptcp_enter_memory_pressure(sk);
return false;
}
static struct mptcp_data_frag *
mptcp_carve_data_frag(const struct mptcp_sock *msk, struct page_frag *pfrag,
int orig_offset)
{
int offset = ALIGN(orig_offset, sizeof(long));
struct mptcp_data_frag *dfrag;
dfrag = (struct mptcp_data_frag *)(page_to_virt(pfrag->page) + offset);
dfrag->data_len = 0;
dfrag->data_seq = msk->write_seq;
dfrag->overhead = offset - orig_offset + sizeof(struct mptcp_data_frag);
dfrag->offset = offset + sizeof(struct mptcp_data_frag);
dfrag->already_sent = 0;
dfrag->page = pfrag->page;
return dfrag;
}
struct mptcp_sendmsg_info {
int mss_now;
int size_goal;
u16 limit;
u16 sent;
unsigned int flags;
bool data_lock_held;
};
static int mptcp_check_allowed_size(struct mptcp_sock *msk, u64 data_seq,
int avail_size)
{
u64 window_end = mptcp_wnd_end(msk);
if (__mptcp_check_fallback(msk))
return avail_size;
if (!before64(data_seq + avail_size, window_end)) {
u64 allowed_size = window_end - data_seq;
return min_t(unsigned int, allowed_size, avail_size);
}
return avail_size;
}
static bool __mptcp_add_ext(struct sk_buff *skb, gfp_t gfp)
{
struct skb_ext *mpext = __skb_ext_alloc(gfp);
if (!mpext)
return false;
__skb_ext_set(skb, SKB_EXT_MPTCP, mpext);
return true;
}
static struct sk_buff *__mptcp_do_alloc_tx_skb(struct sock *sk, gfp_t gfp)
{
struct sk_buff *skb;
skb = alloc_skb_fclone(MAX_TCP_HEADER, gfp);
if (likely(skb)) {
if (likely(__mptcp_add_ext(skb, gfp))) {
skb_reserve(skb, MAX_TCP_HEADER);
skb->ip_summed = CHECKSUM_PARTIAL;
INIT_LIST_HEAD(&skb->tcp_tsorted_anchor);
return skb;
}
__kfree_skb(skb);
} else {
mptcp_enter_memory_pressure(sk);
}
return NULL;
}
static struct sk_buff *__mptcp_alloc_tx_skb(struct sock *sk, struct sock *ssk, gfp_t gfp)
{
struct sk_buff *skb;
skb = __mptcp_do_alloc_tx_skb(sk, gfp);
if (!skb)
return NULL;
if (likely(sk_wmem_schedule(ssk, skb->truesize))) {
tcp_skb_entail(ssk, skb);
return skb;
}
mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skb Got crash when doing pressure test of mptcp: =========================================================================== dst_release: dst:ffffa06ce6e5c058 refcnt:-1 kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffa06ce6e5c058 PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063 Oops: 0011 [#1] SMP PTI CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014 Call Trace: ? skb_release_head_state+0x68/0x100 ? skb_release_all+0xe/0x30 ? kfree_skb+0x32/0xa0 ? mptcp_sendmsg_frag+0x57e/0x750 ? __mptcp_retrans+0x21b/0x3c0 ? __switch_to_asm+0x35/0x70 ? mptcp_worker+0x25e/0x320 ? process_one_work+0x1a7/0x360 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ? ret_from_fork+0x35/0x40 =========================================================================== In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will be initialized, in under memory pressure situation sk_wmem_schedule will return false and then kfree_skb. In this case skb->_skb_refdst is not null because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and kfree_skb will try to release dst and cause crash. Fixes: f70cad1085d1 ("mptcp: stop relying on tcp_tx_skb_cache") Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20220317220953.426024-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18 06:09:53 +08:00
tcp_skb_tsorted_anchor_cleanup(skb);
kfree_skb(skb);
return NULL;
}
static struct sk_buff *mptcp_alloc_tx_skb(struct sock *sk, struct sock *ssk, bool data_lock_held)
{
gfp_t gfp = data_lock_held ? GFP_ATOMIC : sk->sk_allocation;
if (unlikely(tcp_under_memory_pressure(sk))) {
if (data_lock_held)
__mptcp_mem_reclaim_partial(sk);
else
mptcp_mem_reclaim_partial(sk);
}
return __mptcp_alloc_tx_skb(sk, ssk, gfp);
}
/* note: this always recompute the csum on the whole skb, even
* if we just appended a single frag. More status info needed
*/
static void mptcp_update_data_checksum(struct sk_buff *skb, int added)
{
struct mptcp_ext *mpext = mptcp_get_ext(skb);
__wsum csum = ~csum_unfold(mpext->csum);
int offset = skb->len - added;
mpext->csum = csum_fold(csum_block_add(csum, skb_checksum(skb, offset, added, 0), offset));
}
static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
struct mptcp_data_frag *dfrag,
struct mptcp_sendmsg_info *info)
{
u64 data_seq = dfrag->data_seq + info->sent;
int offset = dfrag->offset + info->sent;
struct mptcp_sock *msk = mptcp_sk(sk);
bool zero_window_probe = false;
struct mptcp_ext *mpext = NULL;
bool can_coalesce = false;
bool reuse_skb = true;
struct sk_buff *skb;
size_t copy;
int i;
pr_debug("msk=%p ssk=%p sending dfrag at seq=%llu len=%u already sent=%u",
msk, ssk, dfrag->data_seq, dfrag->data_len, info->sent);
if (WARN_ON_ONCE(info->sent > info->limit ||
info->limit > dfrag->data_len))
return 0;
/* compute send limit */
info->mss_now = tcp_send_mss(ssk, &info->size_goal, info->flags);
copy = info->size_goal;
skb = tcp_write_queue_tail(ssk);
if (skb && copy > skb->len) {
/* Limit the write to the size available in the
* current skb, if any, so that we create at most a new skb.
* Explicitly tells TCP internals to avoid collapsing on later
* queue management operation, to avoid breaking the ext <->
* SSN association set here
*/
mpext = skb_ext_find(skb, SKB_EXT_MPTCP);
if (!mptcp_skb_can_collapse_to(data_seq, skb, mpext)) {
TCP_SKB_CB(skb)->eor = 1;
goto alloc_skb;
}
i = skb_shinfo(skb)->nr_frags;
can_coalesce = skb_can_coalesce(skb, i, dfrag->page, offset);
if (!can_coalesce && i >= sysctl_max_skb_frags) {
tcp_mark_push(tcp_sk(ssk), skb);
goto alloc_skb;
}
copy -= skb->len;
} else {
alloc_skb:
skb = mptcp_alloc_tx_skb(sk, ssk, info->data_lock_held);
if (!skb)
return -ENOMEM;
i = skb_shinfo(skb)->nr_frags;
reuse_skb = false;
mpext = skb_ext_find(skb, SKB_EXT_MPTCP);
}
/* Zero window and all data acked? Probe. */
copy = mptcp_check_allowed_size(msk, data_seq, copy);
if (copy == 0) {
u64 snd_una = READ_ONCE(msk->snd_una);
if (snd_una != msk->snd_nxt) {
tcp_remove_empty_skb(ssk);
return 0;
}
zero_window_probe = true;
data_seq = snd_una - 1;
copy = 1;
/* all mptcp-level data is acked, no skbs should be present into the
* ssk write queue
*/
WARN_ON_ONCE(reuse_skb);
}
copy = min_t(size_t, copy, info->limit - info->sent);
if (!sk_wmem_schedule(ssk, copy)) {
tcp_remove_empty_skb(ssk);
return -ENOMEM;
}
if (can_coalesce) {
skb_frag_size_add(&skb_shinfo(skb)->frags[i - 1], copy);
} else {
get_page(dfrag->page);
skb_fill_page_desc(skb, i, dfrag->page, offset, copy);
}
skb->len += copy;
skb->data_len += copy;
skb->truesize += copy;
sk_wmem_queued_add(ssk, copy);
sk_mem_charge(ssk, copy);
WRITE_ONCE(tcp_sk(ssk)->write_seq, tcp_sk(ssk)->write_seq + copy);
TCP_SKB_CB(skb)->end_seq += copy;
tcp_skb_pcount_set(skb, 0);
/* on skb reuse we just need to update the DSS len */
if (reuse_skb) {
TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH;
mpext->data_len += copy;
WARN_ON_ONCE(zero_window_probe);
goto out;
}
memset(mpext, 0, sizeof(*mpext));
mpext->data_seq = data_seq;
mpext->subflow_seq = mptcp_subflow_ctx(ssk)->rel_write_seq;
mpext->data_len = copy;
mpext->use_map = 1;
mpext->dsn64 = 1;
pr_debug("data_seq=%llu subflow_seq=%u data_len=%u dsn64=%d",
mpext->data_seq, mpext->subflow_seq, mpext->data_len,
mpext->dsn64);
if (zero_window_probe) {
mptcp_subflow_ctx(ssk)->rel_write_seq += copy;
mpext->frozen = 1;
if (READ_ONCE(msk->csum_enabled))
mptcp_update_data_checksum(skb, copy);
tcp_push_pending_frames(ssk);
return 0;
}
out:
if (READ_ONCE(msk->csum_enabled))
mptcp_update_data_checksum(skb, copy);
trace_mptcp_sendmsg_frag(mpext);
mptcp_subflow_ctx(ssk)->rel_write_seq += copy;
return copy;
}
#define MPTCP_SEND_BURST_SIZE ((1 << 16) - \
sizeof(struct tcphdr) - \
MAX_TCP_OPTION_SPACE - \
sizeof(struct ipv6hdr) - \
sizeof(struct frag_hdr))
struct subflow_send_info {
struct sock *ssk;
u64 linger_time;
};
void mptcp_subflow_set_active(struct mptcp_subflow_context *subflow)
{
if (!subflow->stale)
return;
subflow->stale = 0;
MPTCP_INC_STATS(sock_net(mptcp_subflow_tcp_sock(subflow)), MPTCP_MIB_SUBFLOWRECOVER);
}
bool mptcp_subflow_active(struct mptcp_subflow_context *subflow)
{
if (unlikely(subflow->stale)) {
u32 rcv_tstamp = READ_ONCE(tcp_sk(mptcp_subflow_tcp_sock(subflow))->rcv_tstamp);
if (subflow->stale_rcv_tstamp == rcv_tstamp)
return false;
mptcp_subflow_set_active(subflow);
}
return __mptcp_subflow_active(subflow);
}
#define SSK_MODE_ACTIVE 0
#define SSK_MODE_BACKUP 1
#define SSK_MODE_MAX 2
/* implement the mptcp packet scheduler;
* returns the subflow that will transmit the next DSS
* additionally updates the rtx timeout
*/
static struct sock *mptcp_subflow_get_send(struct mptcp_sock *msk)
{
struct subflow_send_info send_info[SSK_MODE_MAX];
struct mptcp_subflow_context *subflow;
struct sock *sk = (struct sock *)msk;
u32 pace, burst, wmem;
int i, nr_active = 0;
struct sock *ssk;
u64 linger_time;
long tout = 0;
sock_owned_by_me(sk);
if (__mptcp_check_fallback(msk)) {
if (!msk->first)
return NULL;
return sk_stream_memory_free(msk->first) ? msk->first : NULL;
}
/* re-use last subflow, if the burst allow that */
if (msk->last_snd && msk->snd_burst > 0 &&
sk_stream_memory_free(msk->last_snd) &&
mptcp_subflow_active(mptcp_subflow_ctx(msk->last_snd))) {
mptcp_set_timeout(sk);
return msk->last_snd;
}
/* pick the subflow with the lower wmem/wspace ratio */
for (i = 0; i < SSK_MODE_MAX; ++i) {
send_info[i].ssk = NULL;
send_info[i].linger_time = -1;
}
mptcp_for_each_subflow(msk, subflow) {
trace_mptcp_subflow_get_send(subflow);
ssk = mptcp_subflow_tcp_sock(subflow);
if (!mptcp_subflow_active(subflow))
continue;
tout = max(tout, mptcp_timeout_from_subflow(subflow));
nr_active += !subflow->backup;
pace = subflow->avg_pacing_rate;
if (unlikely(!pace)) {
/* init pacing rate from socket */
subflow->avg_pacing_rate = READ_ONCE(ssk->sk_pacing_rate);
pace = subflow->avg_pacing_rate;
if (!pace)
continue;
}
linger_time = div_u64((u64)READ_ONCE(ssk->sk_wmem_queued) << 32, pace);
if (linger_time < send_info[subflow->backup].linger_time) {
send_info[subflow->backup].ssk = ssk;
send_info[subflow->backup].linger_time = linger_time;
}
}
__mptcp_set_timeout(sk, tout);
/* pick the best backup if no other subflow is active */
if (!nr_active)
send_info[SSK_MODE_ACTIVE].ssk = send_info[SSK_MODE_BACKUP].ssk;
/* According to the blest algorithm, to avoid HoL blocking for the
* faster flow, we need to:
* - estimate the faster flow linger time
* - use the above to estimate the amount of byte transferred
* by the faster flow
* - check that the amount of queued data is greter than the above,
* otherwise do not use the picked, slower, subflow
* We select the subflow with the shorter estimated time to flush
* the queued mem, which basically ensure the above. We just need
* to check that subflow has a non empty cwin.
*/
ssk = send_info[SSK_MODE_ACTIVE].ssk;
if (!ssk || !sk_stream_memory_free(ssk) || !tcp_sk(ssk)->snd_wnd)
return NULL;
burst = min_t(int, MPTCP_SEND_BURST_SIZE, tcp_sk(ssk)->snd_wnd);
wmem = READ_ONCE(ssk->sk_wmem_queued);
subflow = mptcp_subflow_ctx(ssk);
subflow->avg_pacing_rate = div_u64((u64)subflow->avg_pacing_rate * wmem +
READ_ONCE(ssk->sk_pacing_rate) * burst,
burst + wmem);
msk->last_snd = ssk;
msk->snd_burst = burst;
return ssk;
}
static void mptcp_push_release(struct sock *ssk, struct mptcp_sendmsg_info *info)
{
tcp_push(ssk, 0, info->mss_now, tcp_sk(ssk)->nonagle, info->size_goal);
release_sock(ssk);
}
static void mptcp_update_post_push(struct mptcp_sock *msk,
struct mptcp_data_frag *dfrag,
u32 sent)
{
u64 snd_nxt_new = dfrag->data_seq;
dfrag->already_sent += sent;
msk->snd_burst -= sent;
snd_nxt_new += dfrag->already_sent;
/* snd_nxt_new can be smaller than snd_nxt in case mptcp
* is recovering after a failover. In that event, this re-sends
* old segments.
*
* Thus compute snd_nxt_new candidate based on
* the dfrag->data_seq that was sent and the data
* that has been handed to the subflow for transmission
* and skip update in case it was old dfrag.
*/
if (likely(after64(snd_nxt_new, msk->snd_nxt)))
msk->snd_nxt = snd_nxt_new;
}
void mptcp_check_and_set_pending(struct sock *sk)
{
if (mptcp_send_head(sk))
mptcp_sk(sk)->push_pending |= BIT(MPTCP_PUSH_PENDING);
}
void __mptcp_push_pending(struct sock *sk, unsigned int flags)
{
struct sock *prev_ssk = NULL, *ssk = NULL;
struct mptcp_sock *msk = mptcp_sk(sk);
struct mptcp_sendmsg_info info = {
.flags = flags,
};
struct mptcp_data_frag *dfrag;
int len, copied = 0;
while ((dfrag = mptcp_send_head(sk))) {
info.sent = dfrag->already_sent;
info.limit = dfrag->data_len;
len = dfrag->data_len - dfrag->already_sent;
while (len > 0) {
int ret = 0;
prev_ssk = ssk;
ssk = mptcp_subflow_get_send(msk);
/* First check. If the ssk has changed since
* the last round, release prev_ssk
*/
if (ssk != prev_ssk && prev_ssk)
mptcp_push_release(prev_ssk, &info);
if (!ssk)
goto out;
/* Need to lock the new subflow only if different
* from the previous one, otherwise we are still
* helding the relevant lock
*/
if (ssk != prev_ssk)
lock_sock(ssk);
ret = mptcp_sendmsg_frag(sk, ssk, dfrag, &info);
if (ret <= 0) {
mptcp_push_release(ssk, &info);
goto out;
}
info.sent += ret;
copied += ret;
len -= ret;
mptcp_update_post_push(msk, dfrag, ret);
}
WRITE_ONCE(msk->first_pending, mptcp_send_next(sk));
}
/* at this point we held the socket lock for the last subflow we used */
if (ssk)
mptcp_push_release(ssk, &info);
out:
/* ensure the rtx timer is running */
if (!mptcp_timer_pending(sk))
mptcp_reset_timer(sk);
if (copied)
__mptcp_check_send_data_fin(sk);
}
static void __mptcp_subflow_push_pending(struct sock *sk, struct sock *ssk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct mptcp_sendmsg_info info = {
.data_lock_held = true,
};
struct mptcp_data_frag *dfrag;
struct sock *xmit_ssk;
int len, copied = 0;
bool first = true;
info.flags = 0;
while ((dfrag = mptcp_send_head(sk))) {
info.sent = dfrag->already_sent;
info.limit = dfrag->data_len;
len = dfrag->data_len - dfrag->already_sent;
while (len > 0) {
int ret = 0;
/* the caller already invoked the packet scheduler,
* check for a different subflow usage only after
* spooling the first chunk of data
*/
xmit_ssk = first ? ssk : mptcp_subflow_get_send(mptcp_sk(sk));
if (!xmit_ssk)
goto out;
if (xmit_ssk != ssk) {
mptcp_subflow_delegate(mptcp_subflow_ctx(xmit_ssk),
MPTCP_DELEGATE_SEND);
goto out;
}
ret = mptcp_sendmsg_frag(sk, ssk, dfrag, &info);
if (ret <= 0)
goto out;
info.sent += ret;
copied += ret;
len -= ret;
first = false;
mptcp_update_post_push(msk, dfrag, ret);
}
WRITE_ONCE(msk->first_pending, mptcp_send_next(sk));
}
out:
/* __mptcp_alloc_tx_skb could have released some wmem and we are
* not going to flush it via release_sock()
*/
if (copied) {
tcp_push(ssk, 0, info.mss_now, tcp_sk(ssk)->nonagle,
info.size_goal);
if (!mptcp_timer_pending(sk))
mptcp_reset_timer(sk);
if (msk->snd_data_fin_enable &&
msk->snd_nxt + 1 == msk->write_seq)
mptcp_schedule_work(sk);
}
}
static void mptcp_set_nospace(struct sock *sk)
{
/* enable autotune */
set_bit(SOCK_NOSPACE, &sk->sk_socket->flags);
/* will be cleared on avail space */
set_bit(MPTCP_NOSPACE, &mptcp_sk(sk)->flags);
}
static int mptcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct page_frag *pfrag;
size_t copied = 0;
int ret = 0;
long timeo;
/* we don't support FASTOPEN yet */
if (msg->msg_flags & MSG_FASTOPEN)
return -EOPNOTSUPP;
/* silently ignore everything else */
msg->msg_flags &= MSG_MORE | MSG_DONTWAIT | MSG_NOSIGNAL;
lock_sock(sk);
timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
if ((1 << sk->sk_state) & ~(TCPF_ESTABLISHED | TCPF_CLOSE_WAIT)) {
ret = sk_stream_wait_connect(sk, &timeo);
if (ret)
goto out;
}
pfrag = sk_page_frag(sk);
while (msg_data_left(msg)) {
int total_ts, frag_truesize = 0;
struct mptcp_data_frag *dfrag;
bool dfrag_collapsed;
size_t psize, offset;
if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN)) {
ret = -EPIPE;
goto out;
}
/* reuse tail pfrag, if possible, or carve a new one from the
* page allocator
*/
dfrag = mptcp_pending_tail(sk);
dfrag_collapsed = mptcp_frag_can_collapse_to(msk, pfrag, dfrag);
if (!dfrag_collapsed) {
if (!sk_stream_memory_free(sk))
goto wait_for_memory;
if (!mptcp_page_frag_refill(sk, pfrag))
goto wait_for_memory;
dfrag = mptcp_carve_data_frag(msk, pfrag, pfrag->offset);
frag_truesize = dfrag->overhead;
}
/* we do not bound vs wspace, to allow a single packet.
* memory accounting will prevent execessive memory usage
* anyway
*/
offset = dfrag->offset + dfrag->data_len;
psize = pfrag->size - offset;
psize = min_t(size_t, psize, msg_data_left(msg));
total_ts = psize + frag_truesize;
if (!sk_wmem_schedule(sk, total_ts))
goto wait_for_memory;
if (copy_page_from_iter(dfrag->page, offset, psize,
&msg->msg_iter) != psize) {
ret = -EFAULT;
goto out;
}
/* data successfully copied into the write queue */
sk->sk_forward_alloc -= total_ts;
copied += psize;
dfrag->data_len += psize;
frag_truesize += psize;
pfrag->offset += frag_truesize;
WRITE_ONCE(msk->write_seq, msk->write_seq + psize);
/* charge data on mptcp pending queue to the msk socket
* Note: we charge such data both to sk and ssk
*/
sk_wmem_queued_add(sk, frag_truesize);
if (!dfrag_collapsed) {
get_page(dfrag->page);
list_add_tail(&dfrag->list, &msk->rtx_queue);
if (!msk->first_pending)
WRITE_ONCE(msk->first_pending, dfrag);
}
pr_debug("msk=%p dfrag at seq=%llu len=%u sent=%u new=%d", msk,
dfrag->data_seq, dfrag->data_len, dfrag->already_sent,
!dfrag_collapsed);
continue;
wait_for_memory:
mptcp_set_nospace(sk);
__mptcp_push_pending(sk, msg->msg_flags);
ret = sk_stream_wait_memory(sk, &timeo);
if (ret)
goto out;
}
if (copied)
__mptcp_push_pending(sk, msg->msg_flags);
out:
release_sock(sk);
return copied ? : ret;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
static int __mptcp_recvmsg_mskq(struct mptcp_sock *msk,
struct msghdr *msg,
size_t len, int flags,
struct scm_timestamping_internal *tss,
int *cmsg_flags)
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
{
struct sk_buff *skb, *tmp;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
int copied = 0;
skb_queue_walk_safe(&msk->receive_queue, skb, tmp) {
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
u32 offset = MPTCP_SKB_CB(skb)->offset;
u32 data_len = skb->len - offset;
u32 count = min_t(size_t, len - copied, data_len);
int err;
if (!(flags & MSG_TRUNC)) {
err = skb_copy_datagram_msg(skb, offset, msg, count);
if (unlikely(err < 0)) {
if (!copied)
return err;
break;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
}
if (MPTCP_SKB_CB(skb)->has_rxtstamp) {
tcp_update_recv_tstamps(skb, tss);
*cmsg_flags |= MPTCP_CMSG_TS;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
copied += count;
if (count < data_len) {
if (!(flags & MSG_PEEK)) {
MPTCP_SKB_CB(skb)->offset += count;
MPTCP_SKB_CB(skb)->map_seq += count;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
break;
}
if (!(flags & MSG_PEEK)) {
/* we will bulk release the skb memory later */
skb->destructor = NULL;
WRITE_ONCE(msk->rmem_released, msk->rmem_released + skb->truesize);
__skb_unlink(skb, &msk->receive_queue);
__kfree_skb(skb);
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
if (copied >= len)
break;
}
return copied;
}
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
/* receive buffer autotuning. See tcp_rcv_space_adjust for more information.
*
* Only difference: Use highest rtt estimate of the subflows in use.
*/
static void mptcp_rcv_space_adjust(struct mptcp_sock *msk, int copied)
{
struct mptcp_subflow_context *subflow;
struct sock *sk = (struct sock *)msk;
u32 time, advmss = 1;
u64 rtt_us, mstamp;
sock_owned_by_me(sk);
if (copied <= 0)
return;
msk->rcvq_space.copied += copied;
mstamp = div_u64(tcp_clock_ns(), NSEC_PER_USEC);
time = tcp_stamp_us_delta(mstamp, msk->rcvq_space.time);
rtt_us = msk->rcvq_space.rtt_us;
if (rtt_us && time < (rtt_us >> 3))
return;
rtt_us = 0;
mptcp_for_each_subflow(msk, subflow) {
const struct tcp_sock *tp;
u64 sf_rtt_us;
u32 sf_advmss;
tp = tcp_sk(mptcp_subflow_tcp_sock(subflow));
sf_rtt_us = READ_ONCE(tp->rcv_rtt_est.rtt_us);
sf_advmss = READ_ONCE(tp->advmss);
rtt_us = max(sf_rtt_us, rtt_us);
advmss = max(sf_advmss, advmss);
}
msk->rcvq_space.rtt_us = rtt_us;
if (time < (rtt_us >> 3) || rtt_us == 0)
return;
if (msk->rcvq_space.copied <= msk->rcvq_space.space)
goto new_measure;
if (sock_net(sk)->ipv4.sysctl_tcp_moderate_rcvbuf &&
!(sk->sk_userlocks & SOCK_RCVBUF_LOCK)) {
int rcvmem, rcvbuf;
u64 rcvwin, grow;
rcvwin = ((u64)msk->rcvq_space.copied << 1) + 16 * advmss;
grow = rcvwin * (msk->rcvq_space.copied - msk->rcvq_space.space);
do_div(grow, msk->rcvq_space.space);
rcvwin += (grow << 1);
rcvmem = SKB_TRUESIZE(advmss + MAX_TCP_HEADER);
while (tcp_win_from_space(sk, rcvmem) < advmss)
rcvmem += 128;
do_div(rcvwin, advmss);
rcvbuf = min_t(u64, rcvwin * rcvmem,
sock_net(sk)->ipv4.sysctl_tcp_rmem[2]);
if (rcvbuf > sk->sk_rcvbuf) {
u32 window_clamp;
window_clamp = tcp_win_from_space(sk, rcvbuf);
WRITE_ONCE(sk->sk_rcvbuf, rcvbuf);
/* Make subflows follow along. If we do not do this, we
* get drops at subflow level if skbs can't be moved to
* the mptcp rx queue fast enough (announced rcv_win can
* exceed ssk->sk_rcvbuf).
*/
mptcp_for_each_subflow(msk, subflow) {
struct sock *ssk;
bool slow;
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
ssk = mptcp_subflow_tcp_sock(subflow);
slow = lock_sock_fast(ssk);
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
WRITE_ONCE(ssk->sk_rcvbuf, rcvbuf);
tcp_sk(ssk)->window_clamp = window_clamp;
tcp_cleanup_rbuf(ssk, 1);
unlock_sock_fast(ssk, slow);
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
}
}
}
msk->rcvq_space.space = msk->rcvq_space.copied;
new_measure:
msk->rcvq_space.copied = 0;
msk->rcvq_space.time = mstamp;
}
static void __mptcp_update_rmem(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
if (!msk->rmem_released)
return;
atomic_sub(msk->rmem_released, &sk->sk_rmem_alloc);
mptcp_rmem_uncharge(sk, msk->rmem_released);
WRITE_ONCE(msk->rmem_released, 0);
}
static void __mptcp_splice_receive_queue(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
skb_queue_splice_tail_init(&sk->sk_receive_queue, &msk->receive_queue);
}
static bool __mptcp_move_skbs(struct mptcp_sock *msk)
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
{
struct sock *sk = (struct sock *)msk;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
unsigned int moved = 0;
bool ret, done;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
do {
struct sock *ssk = mptcp_subflow_recv_lookup(msk);
bool slowpath;
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
/* we can have data pending in the subflows only if the msk
* receive buffer was full at subflow_data_ready() time,
* that is an unlikely slow path.
*/
if (likely(!ssk))
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
break;
slowpath = lock_sock_fast(ssk);
mptcp_data_lock(sk);
__mptcp_update_rmem(sk);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
done = __mptcp_move_skbs_from_subflow(msk, ssk, &moved);
mptcp_data_unlock(sk);
mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. Reported-by: Maxim Galaganov <max@internet.ru> Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 06:59:44 +08:00
if (unlikely(ssk->sk_err))
__mptcp_error_report(sk);
unlock_sock_fast(ssk, slowpath);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
} while (!done);
/* acquire the data lock only if some input data is pending */
ret = moved > 0;
if (!RB_EMPTY_ROOT(&msk->out_of_order_queue) ||
!skb_queue_empty_lockless(&sk->sk_receive_queue)) {
mptcp_data_lock(sk);
__mptcp_update_rmem(sk);
ret |= __mptcp_ofo_queue(msk);
__mptcp_splice_receive_queue(sk);
mptcp_data_unlock(sk);
}
if (ret)
mptcp_check_data_fin((struct sock *)msk);
return !skb_queue_empty(&msk->receive_queue);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
}
static unsigned int mptcp_inq_hint(const struct sock *sk)
{
const struct mptcp_sock *msk = mptcp_sk(sk);
const struct sk_buff *skb;
skb = skb_peek(&msk->receive_queue);
if (skb) {
u64 hint_val = msk->ack_seq - MPTCP_SKB_CB(skb)->map_seq;
if (hint_val >= INT_MAX)
return INT_MAX;
return (unsigned int)hint_val;
}
if (sk->sk_state == TCP_CLOSE || (sk->sk_shutdown & RCV_SHUTDOWN))
return 1;
return 0;
}
static int mptcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
int flags, int *addr_len)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct scm_timestamping_internal tss;
int copied = 0, cmsg_flags = 0;
int target;
long timeo;
/* MSG_ERRQUEUE is really a no-op till we support IP_RECVERR */
if (unlikely(flags & MSG_ERRQUEUE))
return inet_recv_error(sk, msg, len, addr_len);
lock_sock(sk);
if (unlikely(sk->sk_state == TCP_LISTEN)) {
copied = -ENOTCONN;
goto out_err;
}
timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
len = min_t(size_t, len, INT_MAX);
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
if (unlikely(msk->recvmsg_inq))
cmsg_flags = MPTCP_CMSG_INQ;
while (copied < len) {
int bytes_read;
bytes_read = __mptcp_recvmsg_mskq(msk, msg, len - copied, flags, &tss, &cmsg_flags);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
if (unlikely(bytes_read < 0)) {
if (!copied)
copied = bytes_read;
goto out_err;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
copied += bytes_read;
/* be sure to advertise window change */
mptcp_cleanup_rbuf(msk);
if (skb_queue_empty(&msk->receive_queue) && __mptcp_move_skbs(msk))
continue;
/* only the master socket status is relevant here. The exit
* conditions mirror closely tcp_recvmsg()
*/
if (copied >= target)
break;
if (copied) {
if (sk->sk_err ||
sk->sk_state == TCP_CLOSE ||
(sk->sk_shutdown & RCV_SHUTDOWN) ||
!timeo ||
signal_pending(current))
break;
} else {
if (sk->sk_err) {
copied = sock_error(sk);
break;
}
if (test_and_clear_bit(MPTCP_WORK_EOF, &msk->flags))
mptcp_check_for_eof(msk);
if (sk->sk_shutdown & RCV_SHUTDOWN) {
/* race breaker: the shutdown could be after the
* previous receive queue check
*/
if (__mptcp_move_skbs(msk))
continue;
break;
}
if (sk->sk_state == TCP_CLOSE) {
copied = -ENOTCONN;
break;
}
if (!timeo) {
copied = -EAGAIN;
break;
}
if (signal_pending(current)) {
copied = sock_intr_errno(timeo);
break;
}
}
pr_debug("block timeout %ld", timeo);
mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 06:05:00 +08:00
sk_wait_data(sk, &timeo, NULL);
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
out_err:
if (cmsg_flags && copied >= 0) {
if (cmsg_flags & MPTCP_CMSG_TS)
tcp_recv_timestamp(msg, sk, &tss);
if (cmsg_flags & MPTCP_CMSG_INQ) {
unsigned int inq = mptcp_inq_hint(sk);
put_cmsg(msg, SOL_TCP, TCP_CM_INQ, sizeof(inq), &inq);
}
}
mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 06:05:00 +08:00
pr_debug("msk=%p rx queue empty=%d:%d copied=%d",
msk, skb_queue_empty_lockless(&sk->sk_receive_queue),
skb_queue_empty(&msk->receive_queue), copied);
if (!(flags & MSG_PEEK))
mptcp_rcv_space_adjust(msk, copied);
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
release_sock(sk);
return copied;
}
static void mptcp_retransmit_timer(struct timer_list *t)
{
struct inet_connection_sock *icsk = from_timer(icsk, t,
icsk_retransmit_timer);
struct sock *sk = &icsk->icsk_inet.sk;
struct mptcp_sock *msk = mptcp_sk(sk);
bh_lock_sock(sk);
if (!sock_owned_by_user(sk)) {
/* we need a process context to retransmit */
if (!test_and_set_bit(MPTCP_WORK_RTX, &msk->flags))
mptcp_schedule_work(sk);
} else {
/* delegate our work to tcp_release_cb() */
__set_bit(MPTCP_RETRANSMIT, &msk->cb_flags);
}
bh_unlock_sock(sk);
sock_put(sk);
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
static void mptcp_timeout_timer(struct timer_list *t)
{
struct sock *sk = from_timer(sk, t, sk_timer);
mptcp_schedule_work(sk);
sock_put(sk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
}
/* Find an idle subflow. Return NULL if there is unacked data at tcp
* level.
*
* A backup subflow is returned only if that is the only kind available.
*/
static struct sock *mptcp_subflow_get_retrans(struct mptcp_sock *msk)
{
struct sock *backup = NULL, *pick = NULL;
struct mptcp_subflow_context *subflow;
int min_stale_count = INT_MAX;
sock_owned_by_me((const struct sock *)msk);
if (__mptcp_check_fallback(msk))
return NULL;
mptcp_for_each_subflow(msk, subflow) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
if (!__mptcp_subflow_active(subflow))
continue;
/* still data outstanding at TCP level? skip this */
if (!tcp_rtx_and_write_queues_empty(ssk)) {
mptcp_pm_subflow_chk_stale(msk, ssk);
min_stale_count = min_t(int, min_stale_count, subflow->stale_count);
continue;
}
if (subflow->backup) {
if (!backup)
backup = ssk;
continue;
}
if (!pick)
pick = ssk;
}
if (pick)
return pick;
/* use backup only if there are no progresses anywhere */
return min_stale_count > 1 ? backup : NULL;
}
static void mptcp_dispose_initial_subflow(struct mptcp_sock *msk)
{
if (msk->subflow) {
iput(SOCK_INODE(msk->subflow));
msk->subflow = NULL;
}
}
bool __mptcp_retransmit_pending_data(struct sock *sk)
{
struct mptcp_data_frag *cur, *rtx_head;
struct mptcp_sock *msk = mptcp_sk(sk);
if (__mptcp_check_fallback(mptcp_sk(sk)))
return false;
if (tcp_rtx_and_write_queues_empty(sk))
return false;
/* the closing socket has some data untransmitted and/or unacked:
* some data in the mptcp rtx queue has not really xmitted yet.
* keep it simple and re-inject the whole mptcp level rtx queue
*/
mptcp_data_lock(sk);
__mptcp_clean_una_wakeup(sk);
rtx_head = mptcp_rtx_head(sk);
if (!rtx_head) {
mptcp_data_unlock(sk);
return false;
}
msk->recovery_snd_nxt = msk->snd_nxt;
msk->recovery = true;
mptcp_data_unlock(sk);
msk->first_pending = rtx_head;
msk->snd_burst = 0;
/* be sure to clear the "sent status" on all re-injected fragments */
list_for_each_entry(cur, &msk->rtx_queue, list) {
if (!cur->already_sent)
break;
cur->already_sent = 0;
}
return true;
}
/* flags for __mptcp_close_ssk() */
#define MPTCP_CF_PUSH BIT(1)
#define MPTCP_CF_FASTCLOSE BIT(2)
/* subflow sockets can be either outgoing (connect) or incoming
* (accept).
*
* Outgoing subflows use in-kernel sockets.
* Incoming subflows do not have their own 'struct socket' allocated,
* so we need to use tcp_close() after detaching them from the mptcp
* parent socket.
*/
static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk,
struct mptcp_subflow_context *subflow,
unsigned int flags)
{
struct mptcp_sock *msk = mptcp_sk(sk);
bool need_push, dispose_it;
dispose_it = !msk->subflow || ssk != msk->subflow->sk;
if (dispose_it)
list_del(&subflow->node);
lock_sock_nested(ssk, SINGLE_DEPTH_NESTING);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
if (flags & MPTCP_CF_FASTCLOSE)
subflow->send_fastclose = 1;
need_push = (flags & MPTCP_CF_PUSH) && __mptcp_retransmit_pending_data(sk);
if (!dispose_it) {
tcp_disconnect(ssk, 0);
msk->subflow->state = SS_UNCONNECTED;
mptcp_subflow_ctx_reset(subflow);
release_sock(ssk);
goto out;
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
/* if we are invoked by the msk cleanup code, the subflow is
* already orphaned
*/
if (ssk->sk_socket)
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sock_orphan(ssk);
subflow->disposable = 1;
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
/* if ssk hit tcp_done(), tcp_cleanup_ulp() cleared the related ops
* the ssk has been already destroyed, we just need to release the
* reference owned by msk;
*/
if (!inet_csk(ssk)->icsk_ulp_ops) {
kfree_rcu(subflow, rcu);
} else {
/* otherwise tcp will dispose of the ssk and subflow ctx */
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
__tcp_close(ssk, 0);
/* close acquired an extra ref */
__sock_put(ssk);
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
release_sock(ssk);
sock_put(ssk);
if (ssk == msk->first)
msk->first = NULL;
out:
if (ssk == msk->last_snd)
msk->last_snd = NULL;
if (need_push)
__mptcp_push_pending(sk, 0);
}
void mptcp_close_ssk(struct sock *sk, struct sock *ssk,
struct mptcp_subflow_context *subflow)
{
if (sk->sk_state == TCP_ESTABLISHED)
mptcp_event(MPTCP_EVENT_SUB_CLOSED, mptcp_sk(sk), ssk, GFP_KERNEL);
/* subflow aborted before reaching the fully_established status
* attempt the creation of the next subflow
*/
mptcp_pm_subflow_check_next(mptcp_sk(sk), ssk, subflow);
__mptcp_close_ssk(sk, ssk, subflow, MPTCP_CF_PUSH);
}
mptcp: add dummy icsk_sync_mss() syzbot noted that the master MPTCP socket lacks the icsk_sync_mss callback, and was able to trigger a null pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8e171067 P4D 8e171067 PUD 93fa2067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 8984 Comm: syz-executor066 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc900020b7b80 EFLAGS: 00010246 RAX: 1ffff110124ba600 RBX: 0000000000000000 RCX: ffff88809fefa600 RDX: ffff8880994cdb18 RSI: 0000000000000000 RDI: ffff8880925d3140 RBP: ffffc900020b7bd8 R08: ffffffff870225be R09: fffffbfff140652a R10: fffffbfff140652a R11: 0000000000000000 R12: ffff8880925d35d0 R13: ffff8880925d3140 R14: dffffc0000000000 R15: 1ffff110124ba6ba FS: 0000000001a0b880(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a6d6f000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: cipso_v4_sock_setattr+0x34b/0x470 net/ipv4/cipso_ipv4.c:1888 netlbl_sock_setattr+0x2a7/0x310 net/netlabel/netlabel_kapi.c:989 smack_netlabel security/smack/smack_lsm.c:2425 [inline] smack_inode_setsecurity+0x3da/0x4a0 security/smack/smack_lsm.c:2716 security_inode_setsecurity+0xb2/0x140 security/security.c:1364 __vfs_setxattr_noperm+0x16f/0x3e0 fs/xattr.c:197 vfs_setxattr fs/xattr.c:224 [inline] setxattr+0x335/0x430 fs/xattr.c:451 __do_sys_fsetxattr fs/xattr.c:506 [inline] __se_sys_fsetxattr+0x130/0x1b0 fs/xattr.c:495 __x64_sys_fsetxattr+0xbf/0xd0 fs/xattr.c:495 do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440199 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffcadc19e48 EFLAGS: 00000246 ORIG_RAX: 00000000000000be RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440199 RDX: 0000000020000200 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000003 R09: 00000000004002c8 R10: 0000000000000009 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: CR2: 0000000000000000 Address the issue adding a dummy icsk_sync_mss callback. To properly sync the subflows mss and options list we need some additional infrastructure, which will land to net-next. Reported-by: syzbot+f4dfece964792d80b139@syzkaller.appspotmail.com Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 19:19:03 +08:00
static unsigned int mptcp_sync_mss(struct sock *sk, u32 pmtu)
{
return 0;
}
static void __mptcp_close_subflow(struct mptcp_sock *msk)
{
struct mptcp_subflow_context *subflow, *tmp;
might_sleep();
list_for_each_entry_safe(subflow, tmp, &msk->conn_list, node) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
if (inet_sk_state_load(ssk) != TCP_CLOSE)
continue;
/* 'subflow_data_ready' will re-sched once rx queue is empty */
if (!skb_queue_empty_lockless(&ssk->sk_receive_queue))
continue;
mptcp_close_ssk((struct sock *)msk, ssk, subflow);
}
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
static bool mptcp_check_close_timeout(const struct sock *sk)
{
s32 delta = tcp_jiffies32 - inet_csk(sk)->icsk_mtup.probe_timestamp;
struct mptcp_subflow_context *subflow;
if (delta >= TCP_TIMEWAIT_LEN)
return true;
/* if all subflows are in closed status don't bother with additional
* timeout
*/
mptcp_for_each_subflow(mptcp_sk(sk), subflow) {
if (inet_sk_state_load(mptcp_subflow_tcp_sock(subflow)) !=
TCP_CLOSE)
return false;
}
return true;
}
static void mptcp_check_fastclose(struct mptcp_sock *msk)
{
struct mptcp_subflow_context *subflow, *tmp;
struct sock *sk = &msk->sk.icsk_inet.sk;
if (likely(!READ_ONCE(msk->rcv_fastclose)))
return;
mptcp_token_destroy(msk);
list_for_each_entry_safe(subflow, tmp, &msk->conn_list, node) {
struct sock *tcp_sk = mptcp_subflow_tcp_sock(subflow);
bool slow;
slow = lock_sock_fast(tcp_sk);
if (tcp_sk->sk_state != TCP_CLOSE) {
tcp_send_active_reset(tcp_sk, GFP_ATOMIC);
tcp_set_state(tcp_sk, TCP_CLOSE);
}
unlock_sock_fast(tcp_sk, slow);
}
inet_sk_state_store(sk, TCP_CLOSE);
sk->sk_shutdown = SHUTDOWN_MASK;
smp_mb__before_atomic(); /* SHUTDOWN must be visible first */
set_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags);
mptcp_close_wake_up(sk);
}
static void __mptcp_retrans(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct mptcp_sendmsg_info info = {};
struct mptcp_data_frag *dfrag;
size_t copied = 0;
struct sock *ssk;
int ret;
mptcp_clean_una_wakeup(sk);
/* first check ssk: need to kick "stale" logic */
ssk = mptcp_subflow_get_retrans(msk);
dfrag = mptcp_rtx_head(sk);
if (!dfrag) {
if (mptcp_data_fin_enabled(msk)) {
struct inet_connection_sock *icsk = inet_csk(sk);
icsk->icsk_retransmits++;
mptcp_set_datafin_timeout(sk);
mptcp_send_ack(msk);
goto reset_timer;
}
if (!mptcp_send_head(sk))
return;
goto reset_timer;
}
if (!ssk)
goto reset_timer;
lock_sock(ssk);
/* limit retransmission to the bytes already sent on some subflows */
info.sent = 0;
info.limit = READ_ONCE(msk->csum_enabled) ? dfrag->data_len : dfrag->already_sent;
while (info.sent < info.limit) {
ret = mptcp_sendmsg_frag(sk, ssk, dfrag, &info);
if (ret <= 0)
break;
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_RETRANSSEGS);
copied += ret;
info.sent += ret;
}
if (copied) {
dfrag->already_sent = max(dfrag->already_sent, info.sent);
tcp_push(ssk, 0, info.mss_now, tcp_sk(ssk)->nonagle,
info.size_goal);
}
release_sock(ssk);
reset_timer:
mptcp_check_and_set_pending(sk);
if (!mptcp_timer_pending(sk))
mptcp_reset_timer(sk);
}
static void mptcp_worker(struct work_struct *work)
{
struct mptcp_sock *msk = container_of(work, struct mptcp_sock, work);
struct sock *sk = &msk->sk.icsk_inet.sk;
int state;
lock_sock(sk);
state = sk->sk_state;
if (unlikely(state == TCP_CLOSE))
goto unlock;
mptcp_check_data_fin_ack(sk);
mptcp_check_fastclose(msk);
mptcp_pm_nl_work(msk);
if (test_and_clear_bit(MPTCP_WORK_EOF, &msk->flags))
mptcp_check_for_eof(msk);
__mptcp_check_send_data_fin(sk);
mptcp_check_data_fin(sk);
/* There is no point in keeping around an orphaned sk timedout or
* closed, but we need the msk around to reply to incoming DATA_FIN,
* even if it is orphaned and in FIN_WAIT2 state
*/
if (sock_flag(sk, SOCK_DEAD) &&
(mptcp_check_close_timeout(sk) || sk->sk_state == TCP_CLOSE)) {
inet_sk_state_store(sk, TCP_CLOSE);
__mptcp_destroy_sock(sk);
goto unlock;
}
if (test_and_clear_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags))
__mptcp_close_subflow(msk);
if (test_and_clear_bit(MPTCP_WORK_RTX, &msk->flags))
__mptcp_retrans(sk);
unlock:
release_sock(sk);
sock_put(sk);
}
static int __mptcp_init_sock(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
INIT_LIST_HEAD(&msk->conn_list);
INIT_LIST_HEAD(&msk->join_list);
INIT_LIST_HEAD(&msk->rtx_queue);
INIT_WORK(&msk->work, mptcp_worker);
__skb_queue_head_init(&msk->receive_queue);
msk->out_of_order_queue = RB_ROOT;
msk->first_pending = NULL;
msk->rmem_fwd_alloc = 0;
WRITE_ONCE(msk->rmem_released, 0);
msk->timer_ival = TCP_RTO_MIN;
msk->first = NULL;
mptcp: add dummy icsk_sync_mss() syzbot noted that the master MPTCP socket lacks the icsk_sync_mss callback, and was able to trigger a null pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8e171067 P4D 8e171067 PUD 93fa2067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 8984 Comm: syz-executor066 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc900020b7b80 EFLAGS: 00010246 RAX: 1ffff110124ba600 RBX: 0000000000000000 RCX: ffff88809fefa600 RDX: ffff8880994cdb18 RSI: 0000000000000000 RDI: ffff8880925d3140 RBP: ffffc900020b7bd8 R08: ffffffff870225be R09: fffffbfff140652a R10: fffffbfff140652a R11: 0000000000000000 R12: ffff8880925d35d0 R13: ffff8880925d3140 R14: dffffc0000000000 R15: 1ffff110124ba6ba FS: 0000000001a0b880(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a6d6f000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: cipso_v4_sock_setattr+0x34b/0x470 net/ipv4/cipso_ipv4.c:1888 netlbl_sock_setattr+0x2a7/0x310 net/netlabel/netlabel_kapi.c:989 smack_netlabel security/smack/smack_lsm.c:2425 [inline] smack_inode_setsecurity+0x3da/0x4a0 security/smack/smack_lsm.c:2716 security_inode_setsecurity+0xb2/0x140 security/security.c:1364 __vfs_setxattr_noperm+0x16f/0x3e0 fs/xattr.c:197 vfs_setxattr fs/xattr.c:224 [inline] setxattr+0x335/0x430 fs/xattr.c:451 __do_sys_fsetxattr fs/xattr.c:506 [inline] __se_sys_fsetxattr+0x130/0x1b0 fs/xattr.c:495 __x64_sys_fsetxattr+0xbf/0xd0 fs/xattr.c:495 do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440199 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffcadc19e48 EFLAGS: 00000246 ORIG_RAX: 00000000000000be RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440199 RDX: 0000000020000200 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000003 R09: 00000000004002c8 R10: 0000000000000009 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: CR2: 0000000000000000 Address the issue adding a dummy icsk_sync_mss callback. To properly sync the subflows mss and options list we need some additional infrastructure, which will land to net-next. Reported-by: syzbot+f4dfece964792d80b139@syzkaller.appspotmail.com Fixes: 2303f994b3e1 ("mptcp: Associate MPTCP context with TCP socket") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 19:19:03 +08:00
inet_csk(sk)->icsk_sync_mss = mptcp_sync_mss;
WRITE_ONCE(msk->csum_enabled, mptcp_is_checksum_enabled(sock_net(sk)));
msk->recovery = false;
mptcp_pm_data_init(msk);
/* re-use the csk retrans timer for MPTCP-level retrans */
timer_setup(&msk->sk.icsk_retransmit_timer, mptcp_retransmit_timer, 0);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
timer_setup(&sk->sk_timer, mptcp_timeout_timer, 0);
return 0;
}
static void mptcp_ca_reset(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
tcp_assign_congestion_control(sk);
strcpy(mptcp_sk(sk)->ca_name, icsk->icsk_ca_ops->name);
/* no need to keep a reference to the ops, the name will suffice */
tcp_cleanup_congestion_control(sk);
icsk->icsk_ca_ops = NULL;
}
static int mptcp_init_sock(struct sock *sk)
{
struct net *net = sock_net(sk);
int ret;
ret = __mptcp_init_sock(sk);
if (ret)
return ret;
if (!mptcp_is_enabled(net))
return -ENOPROTOOPT;
if (unlikely(!net->mib.mptcp_statistics) && !mptcp_mib_alloc(net))
return -ENOMEM;
ret = __mptcp_socket_create(mptcp_sk(sk));
if (ret)
return ret;
/* fetch the ca name; do it outside __mptcp_init_sock(), so that clone will
* propagate the correct value
*/
mptcp_ca_reset(sk);
sk_sockets_allocated_inc(sk);
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
sk->sk_rcvbuf = sock_net(sk)->ipv4.sysctl_tcp_rmem[1];
sk->sk_sndbuf = sock_net(sk)->ipv4.sysctl_tcp_wmem[1];
return 0;
}
static void __mptcp_clear_xmit(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct mptcp_data_frag *dtmp, *dfrag;
WRITE_ONCE(msk->first_pending, NULL);
list_for_each_entry_safe(dfrag, dtmp, &msk->rtx_queue, list)
dfrag_clear(sk, dfrag);
}
static void mptcp_cancel_work(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
if (cancel_work_sync(&msk->work))
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
__sock_put(sk);
}
void mptcp_subflow_shutdown(struct sock *sk, struct sock *ssk, int how)
{
lock_sock(ssk);
switch (ssk->sk_state) {
case TCP_LISTEN:
if (!(how & RCV_SHUTDOWN))
break;
fallthrough;
case TCP_SYN_SENT:
tcp_disconnect(ssk, O_NONBLOCK);
break;
default:
if (__mptcp_check_fallback(mptcp_sk(sk))) {
pr_debug("Fallback");
ssk->sk_shutdown |= how;
tcp_shutdown(ssk, how);
} else {
pr_debug("Sending DATA_FIN on subflow %p", ssk);
tcp_send_ack(ssk);
if (!mptcp_timer_pending(sk))
mptcp_reset_timer(sk);
}
break;
}
release_sock(ssk);
}
static const unsigned char new_state[16] = {
/* current state: new state: action: */
[0 /* (Invalid) */] = TCP_CLOSE,
[TCP_ESTABLISHED] = TCP_FIN_WAIT1 | TCP_ACTION_FIN,
[TCP_SYN_SENT] = TCP_CLOSE,
[TCP_SYN_RECV] = TCP_FIN_WAIT1 | TCP_ACTION_FIN,
[TCP_FIN_WAIT1] = TCP_FIN_WAIT1,
[TCP_FIN_WAIT2] = TCP_FIN_WAIT2,
[TCP_TIME_WAIT] = TCP_CLOSE, /* should not happen ! */
[TCP_CLOSE] = TCP_CLOSE,
[TCP_CLOSE_WAIT] = TCP_LAST_ACK | TCP_ACTION_FIN,
[TCP_LAST_ACK] = TCP_LAST_ACK,
[TCP_LISTEN] = TCP_CLOSE,
[TCP_CLOSING] = TCP_CLOSING,
[TCP_NEW_SYN_RECV] = TCP_CLOSE, /* should not happen ! */
};
static int mptcp_close_state(struct sock *sk)
{
int next = (int)new_state[sk->sk_state];
int ns = next & TCP_STATE_MASK;
inet_sk_state_store(sk, ns);
return next & TCP_ACTION_FIN;
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
static void __mptcp_check_send_data_fin(struct sock *sk)
{
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
struct mptcp_subflow_context *subflow;
struct mptcp_sock *msk = mptcp_sk(sk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
pr_debug("msk=%p snd_data_fin_enable=%d pending=%d snd_nxt=%llu write_seq=%llu",
msk, msk->snd_data_fin_enable, !!mptcp_send_head(sk),
msk->snd_nxt, msk->write_seq);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
/* we still need to enqueue subflows or not really shutting down,
* skip this
*/
if (!msk->snd_data_fin_enable || msk->snd_nxt + 1 != msk->write_seq ||
mptcp_send_head(sk))
return;
WRITE_ONCE(msk->snd_nxt, msk->write_seq);
/* fallback socket will not get data_fin/ack, can move to the next
* state now
*/
if (__mptcp_check_fallback(msk)) {
WRITE_ONCE(msk->snd_una, msk->write_seq);
if ((1 << sk->sk_state) & (TCPF_CLOSING | TCPF_LAST_ACK)) {
inet_sk_state_store(sk, TCP_CLOSE);
mptcp_close_wake_up(sk);
} else if (sk->sk_state == TCP_FIN_WAIT1) {
inet_sk_state_store(sk, TCP_FIN_WAIT2);
}
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
mptcp_for_each_subflow(msk, subflow) {
struct sock *tcp_sk = mptcp_subflow_tcp_sock(subflow);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
mptcp_subflow_shutdown(sk, tcp_sk, SEND_SHUTDOWN);
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
}
mptcp: fix use-after-free on tcp fallback When an mptcp socket connects to a tcp peer or when a middlebox interferes with tcp options, mptcp needs to fall back to plain tcp. Problem is that mptcp is trying to be too clever in this case: It attempts to close the mptcp meta sk and transparently replace it with the (only) subflow tcp sk. Unfortunately, this is racy -- the socket is already exposed to userspace. Any parallel calls to send/recv/setsockopt etc. can cause use-after-free: BUG: KASAN: use-after-free in atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline] CPU: 1 PID: 2083 Comm: syz-executor.1 Not tainted 5.5.0 #2 atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline] queued_spin_lock include/asm-generic/qspinlock.h:78 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] __raw_spin_lock_bh include/linux/spinlock_api_smp.h:136 [inline] _raw_spin_lock_bh+0x71/0xd0 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:343 [inline] __lock_sock+0x105/0x190 net/core/sock.c:2414 lock_sock_nested+0x10f/0x140 net/core/sock.c:2938 lock_sock include/net/sock.h:1516 [inline] mptcp_setsockopt+0x2f/0x1f0 net/mptcp/protocol.c:800 __sys_setsockopt+0x152/0x240 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2143 do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 While the use-after-free can be resolved, there is another problem: sock->ops and sock->sk assignments are not atomic, i.e. we may get calls into mptcp functions with sock->sk already pointing at the subflow socket, or calls into tcp functions with a mptcp meta sk. Remove the fallback code and call the relevant functions for the (only) subflow in case the mptcp socket is connected to tcp peer. Reported-by: Christoph Paasch <cpaasch@apple.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05 01:12:30 +08:00
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
static void __mptcp_wr_shutdown(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
pr_debug("msk=%p snd_data_fin_enable=%d shutdown=%x state=%d pending=%d",
msk, msk->snd_data_fin_enable, sk->sk_shutdown, sk->sk_state,
!!mptcp_send_head(sk));
/* will be ignored by fallback sockets */
WRITE_ONCE(msk->write_seq, msk->write_seq + 1);
WRITE_ONCE(msk->snd_data_fin_enable, 1);
__mptcp_check_send_data_fin(sk);
}
static void __mptcp_destroy_sock(struct sock *sk)
{
struct mptcp_subflow_context *subflow, *tmp;
struct mptcp_sock *msk = mptcp_sk(sk);
LIST_HEAD(conn_list);
pr_debug("msk=%p", msk);
might_sleep();
/* join list will be eventually flushed (with rst) at sock lock release time*/
mptcp: avoid a lockdep splat when mcast group was joined syzbot triggered following lockdep splat: ffffffff82d2cd40 (rtnl_mutex){+.+.}, at: ip_mc_drop_socket+0x52/0x180 but task is already holding lock: ffff8881187a2310 (sk_lock-AF_INET){+.+.}, at: mptcp_close+0x18/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_INET){+.+.}: lock_acquire+0xee/0x230 lock_sock_nested+0x89/0xc0 do_ip_setsockopt.isra.0+0x335/0x22f0 ip_setsockopt+0x35/0x60 tcp_setsockopt+0x5d/0x90 __sys_setsockopt+0xf3/0x190 __x64_sys_setsockopt+0x61/0x70 do_syscall_64+0x72/0x300 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (rtnl_mutex){+.+.}: check_prevs_add+0x2b7/0x1210 __lock_acquire+0x10b6/0x1400 lock_acquire+0xee/0x230 __mutex_lock+0x120/0xc70 ip_mc_drop_socket+0x52/0x180 inet_release+0x36/0xe0 __sock_release+0xfd/0x130 __mptcp_close+0xa8/0x1f0 inet_release+0x7f/0xe0 __sock_release+0x69/0x130 sock_close+0x18/0x20 __fput+0x179/0x400 task_work_run+0xd5/0x110 do_exit+0x685/0x1510 do_group_exit+0x7e/0x170 __x64_sys_exit_group+0x28/0x30 do_syscall_64+0x72/0x300 entry_SYSCALL_64_after_hwframe+0x49/0xbe The trigger is: socket(AF_INET, SOCK_STREAM, 0x106 /* IPPROTO_MPTCP */) = 4 setsockopt(4, SOL_IP, MCAST_JOIN_GROUP, {gr_interface=7, gr_group={sa_family=AF_INET, sin_port=htons(20003), sin_addr=inet_addr("224.0.0.2")}}, 136) = 0 exit(0) Which results in a call to rtnl_lock while we are holding the parent mptcp socket lock via mptcp_close -> lock_sock(msk) -> inet_release -> ip_mc_drop_socket -> rtnl_lock(). >From lockdep point of view we thus have both 'rtnl_lock; lock_sock' and 'lock_sock; rtnl_lock'. Fix this by stealing the msk conn_list and doing the subflow close without holding the msk lock. Fixes: cec37a6e41aae7bf ("mptcp: Handle MP_CAPABLE options for outgoing connections") Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29 22:54:45 +08:00
list_splice_init(&msk->conn_list, &conn_list);
sk_stop_timer(sk, &msk->sk.icsk_retransmit_timer);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sk_stop_timer(sk, &sk->sk_timer);
msk->pm.status = 0;
mptcp: avoid a lockdep splat when mcast group was joined syzbot triggered following lockdep splat: ffffffff82d2cd40 (rtnl_mutex){+.+.}, at: ip_mc_drop_socket+0x52/0x180 but task is already holding lock: ffff8881187a2310 (sk_lock-AF_INET){+.+.}, at: mptcp_close+0x18/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_INET){+.+.}: lock_acquire+0xee/0x230 lock_sock_nested+0x89/0xc0 do_ip_setsockopt.isra.0+0x335/0x22f0 ip_setsockopt+0x35/0x60 tcp_setsockopt+0x5d/0x90 __sys_setsockopt+0xf3/0x190 __x64_sys_setsockopt+0x61/0x70 do_syscall_64+0x72/0x300 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (rtnl_mutex){+.+.}: check_prevs_add+0x2b7/0x1210 __lock_acquire+0x10b6/0x1400 lock_acquire+0xee/0x230 __mutex_lock+0x120/0xc70 ip_mc_drop_socket+0x52/0x180 inet_release+0x36/0xe0 __sock_release+0xfd/0x130 __mptcp_close+0xa8/0x1f0 inet_release+0x7f/0xe0 __sock_release+0x69/0x130 sock_close+0x18/0x20 __fput+0x179/0x400 task_work_run+0xd5/0x110 do_exit+0x685/0x1510 do_group_exit+0x7e/0x170 __x64_sys_exit_group+0x28/0x30 do_syscall_64+0x72/0x300 entry_SYSCALL_64_after_hwframe+0x49/0xbe The trigger is: socket(AF_INET, SOCK_STREAM, 0x106 /* IPPROTO_MPTCP */) = 4 setsockopt(4, SOL_IP, MCAST_JOIN_GROUP, {gr_interface=7, gr_group={sa_family=AF_INET, sin_port=htons(20003), sin_addr=inet_addr("224.0.0.2")}}, 136) = 0 exit(0) Which results in a call to rtnl_lock while we are holding the parent mptcp socket lock via mptcp_close -> lock_sock(msk) -> inet_release -> ip_mc_drop_socket -> rtnl_lock(). >From lockdep point of view we thus have both 'rtnl_lock; lock_sock' and 'lock_sock; rtnl_lock'. Fix this by stealing the msk conn_list and doing the subflow close without holding the msk lock. Fixes: cec37a6e41aae7bf ("mptcp: Handle MP_CAPABLE options for outgoing connections") Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29 22:54:45 +08:00
/* clears msk->subflow, allowing the following loop to close
* even the initial subflow
*/
mptcp_dispose_initial_subflow(msk);
mptcp: avoid a lockdep splat when mcast group was joined syzbot triggered following lockdep splat: ffffffff82d2cd40 (rtnl_mutex){+.+.}, at: ip_mc_drop_socket+0x52/0x180 but task is already holding lock: ffff8881187a2310 (sk_lock-AF_INET){+.+.}, at: mptcp_close+0x18/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_INET){+.+.}: lock_acquire+0xee/0x230 lock_sock_nested+0x89/0xc0 do_ip_setsockopt.isra.0+0x335/0x22f0 ip_setsockopt+0x35/0x60 tcp_setsockopt+0x5d/0x90 __sys_setsockopt+0xf3/0x190 __x64_sys_setsockopt+0x61/0x70 do_syscall_64+0x72/0x300 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (rtnl_mutex){+.+.}: check_prevs_add+0x2b7/0x1210 __lock_acquire+0x10b6/0x1400 lock_acquire+0xee/0x230 __mutex_lock+0x120/0xc70 ip_mc_drop_socket+0x52/0x180 inet_release+0x36/0xe0 __sock_release+0xfd/0x130 __mptcp_close+0xa8/0x1f0 inet_release+0x7f/0xe0 __sock_release+0x69/0x130 sock_close+0x18/0x20 __fput+0x179/0x400 task_work_run+0xd5/0x110 do_exit+0x685/0x1510 do_group_exit+0x7e/0x170 __x64_sys_exit_group+0x28/0x30 do_syscall_64+0x72/0x300 entry_SYSCALL_64_after_hwframe+0x49/0xbe The trigger is: socket(AF_INET, SOCK_STREAM, 0x106 /* IPPROTO_MPTCP */) = 4 setsockopt(4, SOL_IP, MCAST_JOIN_GROUP, {gr_interface=7, gr_group={sa_family=AF_INET, sin_port=htons(20003), sin_addr=inet_addr("224.0.0.2")}}, 136) = 0 exit(0) Which results in a call to rtnl_lock while we are holding the parent mptcp socket lock via mptcp_close -> lock_sock(msk) -> inet_release -> ip_mc_drop_socket -> rtnl_lock(). >From lockdep point of view we thus have both 'rtnl_lock; lock_sock' and 'lock_sock; rtnl_lock'. Fix this by stealing the msk conn_list and doing the subflow close without holding the msk lock. Fixes: cec37a6e41aae7bf ("mptcp: Handle MP_CAPABLE options for outgoing connections") Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29 22:54:45 +08:00
list_for_each_entry_safe(subflow, tmp, &conn_list, node) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
__mptcp_close_ssk(sk, ssk, subflow, 0);
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sk->sk_prot->destroy(sk);
WARN_ON_ONCE(msk->rmem_fwd_alloc);
WARN_ON_ONCE(msk->rmem_released);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sk_stream_kill_queues(sk);
xfrm_sk_free_policy(sk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sk_refcnt_debug_release(sk);
sock_put(sk);
}
static void mptcp_close(struct sock *sk, long timeout)
{
struct mptcp_subflow_context *subflow;
bool do_cancel_work = false;
lock_sock(sk);
sk->sk_shutdown = SHUTDOWN_MASK;
if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE)) {
inet_sk_state_store(sk, TCP_CLOSE);
goto cleanup;
}
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
if (mptcp_close_state(sk))
__mptcp_wr_shutdown(sk);
sk_stream_wait_close(sk, timeout);
cleanup:
/* orphan all the subflows */
inet_csk(sk)->icsk_mtup.probe_timestamp = tcp_jiffies32;
mptcp_for_each_subflow(mptcp_sk(sk), subflow) {
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
net: introduce and use lock_sock_fast_nested() Syzkaller reported a false positive deadlock involving the nl socket lock and the subflow socket lock: MPTCP: kernel_bind error, err=-98 ============================================ WARNING: possible recursive locking detected 5.15.0-rc1-syzkaller #0 Not tainted -------------------------------------------- syz-executor998/6520 is trying to acquire lock: ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 but task is already holding lock: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-sk_lock-AF_INET); lock(k-sk_lock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor998/6520: #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline] #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline] #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720 stack backtrace: CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline] check_deadlock kernel/locking/lockdep.c:2987 [inline] validate_chain kernel/locking/lockdep.c:3776 [inline] __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_fast+0x36/0x100 net/core/sock.c:3229 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 __sock_release net/socket.c:649 [inline] sock_release+0x87/0x1b0 net/socket.c:677 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504 kernel_sendpage net/socket.c:3501 [inline] sock_sendpage+0xe5/0x140 net/socket.c:1003 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364 splice_from_pipe_feed fs/splice.c:418 [inline] __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562 splice_from_pipe fs/splice.c:597 [inline] generic_splice_sendpage+0xd4/0x140 fs/splice.c:746 do_splice_from fs/splice.c:767 [inline] direct_splice_actor+0x110/0x180 fs/splice.c:936 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891 do_splice_direct+0x1b3/0x280 fs/splice.c:979 do_sendfile+0xae9/0x1240 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1314 [inline] __se_sys_sendfile64 fs/read_write.c:1300 [inline] __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f215cb69969 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08 R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 the problem originates from uncorrect lock annotation in the mptcp code and is only visible since commit 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations"), but is present since the port-based endpoint support initial implementation. This patch addresses the issue introducing a nested variant of lock_sock_fast() and using it in the relevant code path. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29 17:59:17 +08:00
bool slow = lock_sock_fast_nested(ssk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sock_orphan(ssk);
unlock_sock_fast(ssk, slow);
}
sock_orphan(sk);
sock_hold(sk);
pr_debug("msk=%p state=%d", sk, sk->sk_state);
if (mptcp_sk(sk)->token)
mptcp_event(MPTCP_EVENT_CLOSED, mptcp_sk(sk), NULL, GFP_KERNEL);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
if (sk->sk_state == TCP_CLOSE) {
__mptcp_destroy_sock(sk);
do_cancel_work = true;
} else {
sk_reset_timer(sk, &sk->sk_timer, jiffies + TCP_TIMEWAIT_LEN);
}
release_sock(sk);
if (do_cancel_work)
mptcp_cancel_work(sk);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sock_put(sk);
}
static void mptcp_copy_inaddrs(struct sock *msk, const struct sock *ssk)
{
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
const struct ipv6_pinfo *ssk6 = inet6_sk(ssk);
struct ipv6_pinfo *msk6 = inet6_sk(msk);
msk->sk_v6_daddr = ssk->sk_v6_daddr;
msk->sk_v6_rcv_saddr = ssk->sk_v6_rcv_saddr;
if (msk6 && ssk6) {
msk6->saddr = ssk6->saddr;
msk6->flow_label = ssk6->flow_label;
}
#endif
inet_sk(msk)->inet_num = inet_sk(ssk)->inet_num;
inet_sk(msk)->inet_dport = inet_sk(ssk)->inet_dport;
inet_sk(msk)->inet_sport = inet_sk(ssk)->inet_sport;
inet_sk(msk)->inet_daddr = inet_sk(ssk)->inet_daddr;
inet_sk(msk)->inet_saddr = inet_sk(ssk)->inet_saddr;
inet_sk(msk)->inet_rcv_saddr = inet_sk(ssk)->inet_rcv_saddr;
}
static int mptcp_disconnect(struct sock *sk, int flags)
{
struct mptcp_subflow_context *subflow;
struct mptcp_sock *msk = mptcp_sk(sk);
inet_sk_state_store(sk, TCP_CLOSE);
mptcp_for_each_subflow(msk, subflow) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
__mptcp_close_ssk(sk, ssk, subflow, MPTCP_CF_FASTCLOSE);
}
sk_stop_timer(sk, &msk->sk.icsk_retransmit_timer);
sk_stop_timer(sk, &sk->sk_timer);
if (mptcp_sk(sk)->token)
mptcp_event(MPTCP_EVENT_CLOSED, mptcp_sk(sk), NULL, GFP_KERNEL);
mptcp_destroy_common(msk);
msk->last_snd = NULL;
WRITE_ONCE(msk->flags, 0);
msk->cb_flags = 0;
msk->push_pending = 0;
msk->recovery = false;
msk->can_ack = false;
msk->fully_established = false;
msk->rcv_data_fin = false;
msk->snd_data_fin_enable = false;
msk->rcv_fastclose = false;
msk->use_64bit_ack = false;
WRITE_ONCE(msk->csum_enabled, mptcp_is_checksum_enabled(sock_net(sk)));
mptcp_pm_data_reset(msk);
mptcp_ca_reset(sk);
sk->sk_shutdown = 0;
sk_error_report(sk);
return 0;
}
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
static struct ipv6_pinfo *mptcp_inet6_sk(const struct sock *sk)
{
unsigned int offset = sizeof(struct mptcp6_sock) - sizeof(struct ipv6_pinfo);
return (struct ipv6_pinfo *)(((u8 *)sk) + offset);
}
#endif
struct sock *mptcp_sk_clone(const struct sock *sk,
mptcp: move option parsing into mptcp_incoming_options() The mptcp_options_received structure carries several per packet flags (mp_capable, mp_join, etc.). Such fields must be cleared on each packet, even on dropped ones or packet not carrying any MPTCP options, but the current mptcp code clears them only on TCP option reset. On several races/corner cases we end-up with stray bits in incoming options, leading to WARN_ON splats. e.g.: [ 171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713 [ 171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata [ 171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95 [ 171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c [ 171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282 [ 171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e [ 171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955 [ 171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca [ 171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020 [ 171.228460] FS: 00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000 [ 171.230065] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0 [ 171.232586] Call Trace: [ 171.233109] <IRQ> [ 171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691) [ 171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832) [ 171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1)) [ 171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217) [ 171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822) [ 171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730) [ 171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009) [ 171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1)) [ 171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232) [ 171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252) [ 171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539) [ 171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135) [ 171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640) [ 171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293) [ 171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083) [ 171.282358] </IRQ> We could address the issue clearing explicitly the relevant fields in several places - tcp_parse_option, tcp_fast_parse_options, possibly others. Instead we move the MPTCP option parsing into the already existing mptcp ingress hook, so that we need to clear the fields in a single place. This allows us dropping an MPTCP hook from the TCP code and removing the quite large mptcp_options_received from the tcp_sock struct. On the flip side, the MPTCP sockets will traverse the option space twice (in tcp_parse_option() and in mptcp_incoming_options(). That looks acceptable: we already do that for syn and 3rd ack packets, plain TCP socket will benefit from it, and even MPTCP sockets will experience better code locality, reducing the jumps between TCP and MPTCP code. v1 -> v2: - rebased on current '-net' tree Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30 21:01:52 +08:00
const struct mptcp_options_received *mp_opt,
struct request_sock *req)
{
struct mptcp_subflow_request_sock *subflow_req = mptcp_subflow_rsk(req);
struct sock *nsk = sk_clone_lock(sk, GFP_ATOMIC);
struct mptcp_sock *msk;
u64 ack_seq;
if (!nsk)
return NULL;
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
if (nsk->sk_family == AF_INET6)
inet_sk(nsk)->pinet6 = mptcp_inet6_sk(nsk);
#endif
__mptcp_init_sock(nsk);
msk = mptcp_sk(nsk);
msk->local_key = subflow_req->local_key;
msk->token = subflow_req->token;
msk->subflow = NULL;
WRITE_ONCE(msk->fully_established, false);
if (mp_opt->suboptions & OPTION_MPTCP_CSUMREQD)
WRITE_ONCE(msk->csum_enabled, true);
msk->write_seq = subflow_req->idsn + 1;
msk->snd_nxt = msk->write_seq;
msk->snd_una = msk->write_seq;
msk->wnd_end = msk->snd_nxt + req->rsk_rcv_wnd;
msk->setsockopt_seq = mptcp_sk(sk)->setsockopt_seq;
if (mp_opt->suboptions & OPTIONS_MPTCP_MPC) {
msk->can_ack = true;
mptcp: move option parsing into mptcp_incoming_options() The mptcp_options_received structure carries several per packet flags (mp_capable, mp_join, etc.). Such fields must be cleared on each packet, even on dropped ones or packet not carrying any MPTCP options, but the current mptcp code clears them only on TCP option reset. On several races/corner cases we end-up with stray bits in incoming options, leading to WARN_ON splats. e.g.: [ 171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713 [ 171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata [ 171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95 [ 171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c [ 171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282 [ 171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e [ 171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955 [ 171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca [ 171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020 [ 171.228460] FS: 00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000 [ 171.230065] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0 [ 171.232586] Call Trace: [ 171.233109] <IRQ> [ 171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691) [ 171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832) [ 171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1)) [ 171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217) [ 171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822) [ 171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730) [ 171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009) [ 171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1)) [ 171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232) [ 171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252) [ 171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539) [ 171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135) [ 171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640) [ 171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293) [ 171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083) [ 171.282358] </IRQ> We could address the issue clearing explicitly the relevant fields in several places - tcp_parse_option, tcp_fast_parse_options, possibly others. Instead we move the MPTCP option parsing into the already existing mptcp ingress hook, so that we need to clear the fields in a single place. This allows us dropping an MPTCP hook from the TCP code and removing the quite large mptcp_options_received from the tcp_sock struct. On the flip side, the MPTCP sockets will traverse the option space twice (in tcp_parse_option() and in mptcp_incoming_options(). That looks acceptable: we already do that for syn and 3rd ack packets, plain TCP socket will benefit from it, and even MPTCP sockets will experience better code locality, reducing the jumps between TCP and MPTCP code. v1 -> v2: - rebased on current '-net' tree Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30 21:01:52 +08:00
msk->remote_key = mp_opt->sndr_key;
mptcp_crypto_key_sha(msk->remote_key, NULL, &ack_seq);
ack_seq++;
WRITE_ONCE(msk->ack_seq, ack_seq);
WRITE_ONCE(msk->rcv_wnd_sent, ack_seq);
}
sock_reset_flag(nsk, SOCK_RCU_FREE);
/* will be fully established after successful MPC subflow creation */
inet_sk_state_store(nsk, TCP_SYN_RECV);
security_inet_csk_clone(nsk, req);
bh_unlock_sock(nsk);
/* keep a single reference */
__sock_put(nsk);
return nsk;
}
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
void mptcp_rcv_space_init(struct mptcp_sock *msk, const struct sock *ssk)
{
const struct tcp_sock *tp = tcp_sk(ssk);
msk->rcvq_space.copied = 0;
msk->rcvq_space.rtt_us = 0;
msk->rcvq_space.time = tp->tcp_mstamp;
/* initial rcv_space offering made to peer */
msk->rcvq_space.space = min_t(u32, tp->rcv_wnd,
TCP_INIT_CWND * tp->advmss);
if (msk->rcvq_space.space == 0)
msk->rcvq_space.space = TCP_INIT_CWND * TCP_MSS_DEFAULT;
WRITE_ONCE(msk->wnd_end, msk->snd_nxt + tcp_sk(ssk)->snd_wnd);
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
}
static struct sock *mptcp_accept(struct sock *sk, int flags, int *err,
bool kern)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct socket *listener;
struct sock *newsk;
listener = __mptcp_nmpc_socket(msk);
if (WARN_ON_ONCE(!listener)) {
*err = -EINVAL;
return NULL;
}
pr_debug("msk=%p, listener=%p", msk, mptcp_subflow_ctx(listener->sk));
newsk = inet_csk_accept(listener->sk, flags, err, kern);
if (!newsk)
return NULL;
pr_debug("msk=%p, subflow is mptcp=%d", msk, sk_is_mptcp(newsk));
if (sk_is_mptcp(newsk)) {
struct mptcp_subflow_context *subflow;
struct sock *new_mptcp_sock;
subflow = mptcp_subflow_ctx(newsk);
new_mptcp_sock = subflow->conn;
/* is_mptcp should be false if subflow->conn is missing, see
* subflow_syn_recv_sock()
*/
if (WARN_ON_ONCE(!new_mptcp_sock)) {
tcp_sk(newsk)->is_mptcp = 0;
goto out;
}
/* acquire the 2nd reference for the owning socket */
sock_hold(new_mptcp_sock);
newsk = new_mptcp_sock;
MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_MPCAPABLEPASSIVEACK);
} else {
MPTCP_INC_STATS(sock_net(sk),
MPTCP_MIB_MPCAPABLEPASSIVEFALLBACK);
}
out:
newsk->sk_kern_sock = kern;
return newsk;
}
void mptcp_destroy_common(struct mptcp_sock *msk)
{
struct sock *sk = (struct sock *)msk;
__mptcp_clear_xmit(sk);
/* move to sk_receive_queue, sk_stream_kill_queues will purge it */
mptcp_data_lock(sk);
skb_queue_splice_tail_init(&msk->receive_queue, &sk->sk_receive_queue);
__skb_queue_purge(&sk->sk_receive_queue);
skb_rbtree_purge(&msk->out_of_order_queue);
mptcp_data_unlock(sk);
/* move all the rx fwd alloc into the sk_mem_reclaim_final in
* inet_sock_destruct() will dispose it
*/
sk->sk_forward_alloc += msk->rmem_fwd_alloc;
msk->rmem_fwd_alloc = 0;
mptcp_token_destroy(msk);
mptcp_pm_free_anno_list(msk);
}
static void mptcp_destroy(struct sock *sk)
{
struct mptcp_sock *msk = mptcp_sk(sk);
mptcp_destroy_common(msk);
sk_sockets_allocated_dec(sk);
}
void __mptcp_data_acked(struct sock *sk)
{
if (!sock_owned_by_user(sk))
__mptcp_clean_una(sk);
else
__set_bit(MPTCP_CLEAN_UNA, &mptcp_sk(sk)->cb_flags);
if (mptcp_pending_data_fin_ack(sk))
mptcp_schedule_work(sk);
}
void __mptcp_check_push(struct sock *sk, struct sock *ssk)
{
if (!mptcp_send_head(sk))
return;
if (!sock_owned_by_user(sk)) {
struct sock *xmit_ssk = mptcp_subflow_get_send(mptcp_sk(sk));
if (xmit_ssk == ssk)
__mptcp_subflow_push_pending(sk, ssk);
else if (xmit_ssk)
mptcp_subflow_delegate(mptcp_subflow_ctx(xmit_ssk), MPTCP_DELEGATE_SEND);
} else {
__set_bit(MPTCP_PUSH_PENDING, &mptcp_sk(sk)->cb_flags);
}
}
#define MPTCP_FLAGS_PROCESS_CTX_NEED (BIT(MPTCP_PUSH_PENDING) | \
BIT(MPTCP_RETRANSMIT) | \
BIT(MPTCP_FLUSH_JOIN_LIST))
/* processes deferred events and flush wmem */
static void mptcp_release_cb(struct sock *sk)
__must_hold(&sk->sk_lock.slock)
{
struct mptcp_sock *msk = mptcp_sk(sk);
for (;;) {
unsigned long flags = (msk->cb_flags & MPTCP_FLAGS_PROCESS_CTX_NEED) |
msk->push_pending;
if (!flags)
break;
/* the following actions acquire the subflow socket lock
*
* 1) can't be invoked in atomic scope
* 2) must avoid ABBA deadlock with msk socket spinlock: the RX
* datapath acquires the msk socket spinlock while helding
* the subflow socket lock
*/
msk->push_pending = 0;
msk->cb_flags &= ~flags;
spin_unlock_bh(&sk->sk_lock.slock);
if (flags & BIT(MPTCP_FLUSH_JOIN_LIST))
__mptcp_flush_join_list(sk);
if (flags & BIT(MPTCP_PUSH_PENDING))
__mptcp_push_pending(sk, 0);
if (flags & BIT(MPTCP_RETRANSMIT))
__mptcp_retrans(sk);
cond_resched();
spin_lock_bh(&sk->sk_lock.slock);
}
if (__test_and_clear_bit(MPTCP_CLEAN_UNA, &msk->cb_flags))
__mptcp_clean_una_wakeup(sk);
if (unlikely(&msk->cb_flags)) {
/* be sure to set the current sk state before tacking actions
* depending on sk_state, that is processing MPTCP_ERROR_REPORT
*/
if (__test_and_clear_bit(MPTCP_CONNECTED, &msk->cb_flags))
__mptcp_set_connected(sk);
if (__test_and_clear_bit(MPTCP_ERROR_REPORT, &msk->cb_flags))
__mptcp_error_report(sk);
if (__test_and_clear_bit(MPTCP_RESET_SCHEDULER, &msk->cb_flags))
msk->last_snd = NULL;
}
__mptcp_update_rmem(sk);
}
/* MP_JOIN client subflow must wait for 4th ack before sending any data:
* TCP can't schedule delack timer before the subflow is fully established.
* MPTCP uses the delack timer to do 3rd ack retransmissions
*/
static void schedule_3rdack_retransmission(struct sock *ssk)
{
struct inet_connection_sock *icsk = inet_csk(ssk);
struct tcp_sock *tp = tcp_sk(ssk);
unsigned long timeout;
if (mptcp_subflow_ctx(ssk)->fully_established)
return;
/* reschedule with a timeout above RTT, as we must look only for drop */
if (tp->srtt_us)
timeout = usecs_to_jiffies(tp->srtt_us >> (3 - 1));
else
timeout = TCP_TIMEOUT_INIT;
timeout += jiffies;
WARN_ON_ONCE(icsk->icsk_ack.pending & ICSK_ACK_TIMER);
icsk->icsk_ack.pending |= ICSK_ACK_SCHED | ICSK_ACK_TIMER;
icsk->icsk_ack.timeout = timeout;
sk_reset_timer(ssk, &icsk->icsk_delack_timer, timeout);
}
void mptcp_subflow_process_delegated(struct sock *ssk)
{
struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
struct sock *sk = subflow->conn;
if (test_bit(MPTCP_DELEGATE_SEND, &subflow->delegated_status)) {
mptcp_data_lock(sk);
if (!sock_owned_by_user(sk))
__mptcp_subflow_push_pending(sk, ssk);
else
__set_bit(MPTCP_PUSH_PENDING, &mptcp_sk(sk)->cb_flags);
mptcp_data_unlock(sk);
mptcp_subflow_delegated_done(subflow, MPTCP_DELEGATE_SEND);
}
if (test_bit(MPTCP_DELEGATE_ACK, &subflow->delegated_status)) {
schedule_3rdack_retransmission(ssk);
mptcp_subflow_delegated_done(subflow, MPTCP_DELEGATE_ACK);
}
}
static int mptcp_hash(struct sock *sk)
{
/* should never be called,
* we hash the TCP subflows not the master socket
*/
WARN_ON_ONCE(1);
return 0;
}
static void mptcp_unhash(struct sock *sk)
{
/* called from sk_common_release(), but nothing to do here */
}
static int mptcp_get_port(struct sock *sk, unsigned short snum)
{
struct mptcp_sock *msk = mptcp_sk(sk);
struct socket *ssock;
ssock = __mptcp_nmpc_socket(msk);
pr_debug("msk=%p, subflow=%p", msk, ssock);
if (WARN_ON_ONCE(!ssock))
return -EINVAL;
return inet_csk_get_port(ssock->sk, snum);
}
void mptcp_finish_connect(struct sock *ssk)
{
struct mptcp_subflow_context *subflow;
struct mptcp_sock *msk;
struct sock *sk;
u64 ack_seq;
subflow = mptcp_subflow_ctx(ssk);
sk = subflow->conn;
msk = mptcp_sk(sk);
pr_debug("msk=%p, token=%u", sk, subflow->token);
mptcp_crypto_key_sha(subflow->remote_key, NULL, &ack_seq);
ack_seq++;
subflow->map_seq = ack_seq;
subflow->map_subflow_seq = 1;
/* the socket is not connected yet, no msk/subflow ops can access/race
* accessing the field below
*/
WRITE_ONCE(msk->remote_key, subflow->remote_key);
WRITE_ONCE(msk->local_key, subflow->local_key);
WRITE_ONCE(msk->write_seq, subflow->idsn + 1);
WRITE_ONCE(msk->snd_nxt, msk->write_seq);
WRITE_ONCE(msk->ack_seq, ack_seq);
WRITE_ONCE(msk->rcv_wnd_sent, ack_seq);
WRITE_ONCE(msk->can_ack, 1);
WRITE_ONCE(msk->snd_una, msk->write_seq);
mptcp_pm_new_connection(msk, ssk, 0);
mptcp: add receive buffer auto-tuning When mptcp is used, userspace doesn't read from the tcp (subflow) socket but from the parent (mptcp) socket receive queue. skbs are moved from the subflow socket to the mptcp rx queue either from 'data_ready' callback (if mptcp socket can be locked), a work queue, or the socket receive function. This means tcp_rcv_space_adjust() is never called and thus no receive buffer size auto-tuning is done. An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the function that moves skbs from subflow to mptcp socket. While this enabled autotuning, it also meant tuning was done even if userspace was reading the mptcp socket very slowly. This adds mptcp_rcv_space_adjust() and calls it after userspace has read data from the mptcp socket rx queue. Its very similar to tcp_rcv_space_adjust, with two differences: 1. The rtt estimate is the largest one observed on a subflow 2. The rcvbuf size and window clamp of all subflows is adjusted to the mptcp-level rcvbuf. Otherwise, we get spurious drops at tcp (subflow) socket level if the skbs are not moved to the mptcp socket fast enough. Before: time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap [..] ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 40823ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 23119ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5421ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 41446ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 23427ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5426ms) [ OK ] Time: 1396 seconds After: ns4 MPTCP -> ns3 (10.0.3.2:10108 ) MPTCP (duration 5417ms) [ OK ] ns4 MPTCP -> ns3 (10.0.3.2:10109 ) TCP (duration 5427ms) [ OK ] ns4 TCP -> ns3 (10.0.3.2:10110 ) MPTCP (duration 5422ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP (duration 5415ms) [ OK ] ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP (duration 5422ms) [ OK ] ns4 TCP -> ns3 (dead:beef:3::2:10113) MPTCP (duration 5423ms) [ OK ] Time: 296 seconds Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01 03:24:45 +08:00
mptcp_rcv_space_init(msk, ssk);
}
void mptcp_sock_graft(struct sock *sk, struct socket *parent)
{
write_lock_bh(&sk->sk_callback_lock);
rcu_assign_pointer(sk->sk_wq, &parent->wq);
sk_set_socket(sk, parent);
sk->sk_uid = SOCK_INODE(parent)->i_uid;
write_unlock_bh(&sk->sk_callback_lock);
}
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
bool mptcp_finish_join(struct sock *ssk)
{
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(ssk);
struct mptcp_sock *msk = mptcp_sk(subflow->conn);
struct sock *parent = (void *)msk;
bool ret = true;
pr_debug("msk=%p, subflow=%p", msk, subflow);
/* mptcp socket already closing? */
if (!mptcp_is_fully_established(parent)) {
subflow->reset_reason = MPTCP_RST_EMPTCP;
return false;
}
if (!msk->pm.server_side)
goto out;
if (!mptcp_pm_allow_new_subflow(msk))
goto err_prohibited;
if (WARN_ON_ONCE(!list_empty(&subflow->node)))
goto err_prohibited;
/* active connections are already on conn_list.
* If we can't acquire msk socket lock here, let the release callback
* handle it
*/
mptcp_data_lock(parent);
if (!sock_owned_by_user(parent)) {
ret = __mptcp_finish_join(msk, ssk);
if (ret) {
sock_hold(ssk);
list_add_tail(&subflow->node, &msk->conn_list);
}
} else {
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
sock_hold(ssk);
list_add_tail(&subflow->node, &msk->join_list);
__set_bit(MPTCP_FLUSH_JOIN_LIST, &msk->cb_flags);
mptcp: refactor shutdown and close We must not close the subflows before all the MPTCP level data, comprising the DATA_FIN has been acked at the MPTCP level, otherwise we could be unable to retransmit as needed. __mptcp_wr_shutdown() shutdown is responsible to check for the correct status and close all subflows. Is called by the output path after spooling any data and at shutdown/close time. In a similar way, __mptcp_destroy_sock() is responsible to clean-up the MPTCP level status, and is called when the msk transition to TCP_CLOSE. The protocol level close() does not force anymore the TCP_CLOSE status, but orphan the msk socket and all the subflows. Orphaned msk sockets are forciby closed after a timeout or when all MPTCP-level data is acked. There is a caveat about keeping the orphaned subflows around: the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via tcp_close(). To prevent accessing freed memory on later MPTCP level operations, the msk acquires a reference to each subflow socket and prevent subflow_ulp_release() from releasing the subflow context before __mptcp_destroy_sock(). The additional subflow references are released by __mptcp_done() and the async ULP release is detected checking ULP ops. If such field has been already cleared by the ULP release path, the dangling context is freed directly by __mptcp_done(). Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16 17:48:09 +08:00
}
mptcp_data_unlock(parent);
if (!ret) {
err_prohibited:
subflow->reset_reason = MPTCP_RST_EPROHIBIT;
return false;
}
subflow->map_seq = READ_ONCE(msk->ack_seq);
out:
mptcp_event(MPTCP_EVENT_SUB_ESTABLISHED, msk, ssk, GFP_ATOMIC);
return true;
}
static void mptcp_shutdown(struct sock *sk, int how)
{
pr_debug("sk=%p, how=%d", sk, how);
if ((how & SEND_SHUTDOWN) && mptcp_close_state(sk))
__mptcp_wr_shutdown(sk);
}
static int mptcp_forward_alloc_get(const struct sock *sk)
{
return sk->sk_forward_alloc + mptcp_sk(sk)->rmem_fwd_alloc;
}
static int mptcp_ioctl_outq(const struct mptcp_sock *msk, u64 v)
{
const struct sock *sk = (void *)msk;
u64 delta;
if (sk->sk_state == TCP_LISTEN)
return -EINVAL;
if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV))
return 0;
delta = msk->write_seq - v;
if (__mptcp_check_fallback(msk) && msk->first) {
struct tcp_sock *tp = tcp_sk(msk->first);
/* the first subflow is disconnected after close - see
* __mptcp_close_ssk(). tcp_disconnect() moves the write_seq
* so ignore that status, too.
*/
if (!((1 << msk->first->sk_state) &
(TCPF_SYN_SENT | TCPF_SYN_RECV | TCPF_CLOSE)))
delta += READ_ONCE(tp->write_seq) - tp->snd_una;
}
if (delta > INT_MAX)
delta = INT_MAX;
return (int)delta;
}
static int mptcp_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
struct mptcp_sock *msk = mptcp_sk(sk);
bool slow;
int answ;
switch (cmd) {
case SIOCINQ:
if (sk->sk_state == TCP_LISTEN)
return -EINVAL;
lock_sock(sk);
__mptcp_move_skbs(msk);
answ = mptcp_inq_hint(sk);
release_sock(sk);
break;
case SIOCOUTQ:
slow = lock_sock_fast(sk);
answ = mptcp_ioctl_outq(msk, READ_ONCE(msk->snd_una));
unlock_sock_fast(sk, slow);
break;
case SIOCOUTQNSD:
slow = lock_sock_fast(sk);
answ = mptcp_ioctl_outq(msk, msk->snd_nxt);
unlock_sock_fast(sk, slow);
break;
default:
return -ENOIOCTLCMD;
}
return put_user(answ, (int __user *)arg);
}
static struct proto mptcp_prot = {
.name = "MPTCP",
.owner = THIS_MODULE,
.init = mptcp_init_sock,
.disconnect = mptcp_disconnect,
.close = mptcp_close,
.accept = mptcp_accept,
.setsockopt = mptcp_setsockopt,
.getsockopt = mptcp_getsockopt,
.shutdown = mptcp_shutdown,
.destroy = mptcp_destroy,
.sendmsg = mptcp_sendmsg,
.ioctl = mptcp_ioctl,
.recvmsg = mptcp_recvmsg,
.release_cb = mptcp_release_cb,
.hash = mptcp_hash,
.unhash = mptcp_unhash,
.get_port = mptcp_get_port,
.forward_alloc_get = mptcp_forward_alloc_get,
.sockets_allocated = &mptcp_sockets_allocated,
.memory_allocated = &tcp_memory_allocated,
.memory_pressure = &tcp_memory_pressure,
.sysctl_wmem_offset = offsetof(struct net, ipv4.sysctl_tcp_wmem),
.sysctl_rmem_offset = offsetof(struct net, ipv4.sysctl_tcp_rmem),
.sysctl_mem = sysctl_tcp_mem,
.obj_size = sizeof(struct mptcp_sock),
.slab_flags = SLAB_TYPESAFE_BY_RCU,
.no_autobind = true,
};
static int mptcp_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len)
{
struct mptcp_sock *msk = mptcp_sk(sock->sk);
struct socket *ssock;
int err;
lock_sock(sock->sk);
ssock = __mptcp_nmpc_socket(msk);
if (!ssock) {
err = -EINVAL;
goto unlock;
}
err = ssock->ops->bind(ssock, uaddr, addr_len);
if (!err)
mptcp_copy_inaddrs(sock->sk, ssock->sk);
unlock:
release_sock(sock->sk);
return err;
}
static void mptcp_subflow_early_fallback(struct mptcp_sock *msk,
struct mptcp_subflow_context *subflow)
{
subflow->request_mptcp = 0;
__mptcp_do_fallback(msk);
}
static int mptcp_stream_connect(struct socket *sock, struct sockaddr *uaddr,
int addr_len, int flags)
{
struct mptcp_sock *msk = mptcp_sk(sock->sk);
struct mptcp_subflow_context *subflow;
struct socket *ssock;
int err = -EINVAL;
lock_sock(sock->sk);
if (uaddr) {
if (addr_len < sizeof(uaddr->sa_family))
goto unlock;
if (uaddr->sa_family == AF_UNSPEC) {
err = mptcp_disconnect(sock->sk, flags);
sock->state = err ? SS_DISCONNECTING : SS_UNCONNECTED;
goto unlock;
}
}
if (sock->state != SS_UNCONNECTED && msk->subflow) {
/* pending connection or invalid state, let existing subflow
* cope with that
*/
ssock = msk->subflow;
goto do_connect;
}
ssock = __mptcp_nmpc_socket(msk);
if (!ssock)
goto unlock;
mptcp_token_destroy(msk);
inet_sk_state_store(sock->sk, TCP_SYN_SENT);
subflow = mptcp_subflow_ctx(ssock->sk);
#ifdef CONFIG_TCP_MD5SIG
/* no MPTCP if MD5SIG is enabled on this socket or we may run out of
* TCP option space.
*/
if (rcu_access_pointer(tcp_sk(ssock->sk)->md5sig_info))
mptcp_subflow_early_fallback(msk, subflow);
#endif
if (subflow->request_mptcp && mptcp_token_new_connect(ssock->sk)) {
MPTCP_INC_STATS(sock_net(ssock->sk), MPTCP_MIB_TOKENFALLBACKINIT);
mptcp_subflow_early_fallback(msk, subflow);
}
if (likely(!__mptcp_check_fallback(msk)))
MPTCP_INC_STATS(sock_net(sock->sk), MPTCP_MIB_MPCAPABLEACTIVE);
do_connect:
err = ssock->ops->connect(ssock, uaddr, addr_len, flags);
sock->state = ssock->state;
/* on successful connect, the msk state will be moved to established by
* subflow_finish_connect()
*/
if (!err || err == -EINPROGRESS)
mptcp_copy_inaddrs(sock->sk, ssock->sk);
else
inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk));
unlock:
release_sock(sock->sk);
return err;
}
static int mptcp_listen(struct socket *sock, int backlog)
{
struct mptcp_sock *msk = mptcp_sk(sock->sk);
struct socket *ssock;
int err;
pr_debug("msk=%p", msk);
lock_sock(sock->sk);
ssock = __mptcp_nmpc_socket(msk);
if (!ssock) {
err = -EINVAL;
goto unlock;
}
mptcp_token_destroy(msk);
inet_sk_state_store(sock->sk, TCP_LISTEN);
sock_set_flag(sock->sk, SOCK_RCU_FREE);
err = ssock->ops->listen(ssock, backlog);
inet_sk_state_store(sock->sk, inet_sk_state_load(ssock->sk));
if (!err)
mptcp_copy_inaddrs(sock->sk, ssock->sk);
unlock:
release_sock(sock->sk);
return err;
}
static int mptcp_stream_accept(struct socket *sock, struct socket *newsock,
int flags, bool kern)
{
struct mptcp_sock *msk = mptcp_sk(sock->sk);
struct socket *ssock;
int err;
pr_debug("msk=%p", msk);
ssock = __mptcp_nmpc_socket(msk);
if (!ssock)
return -EINVAL;
err = ssock->ops->accept(sock, newsock, flags, kern);
if (err == 0 && !mptcp_is_tcpsk(newsock->sk)) {
struct mptcp_sock *msk = mptcp_sk(newsock->sk);
struct mptcp_subflow_context *subflow;
struct sock *newsk = newsock->sk;
lock_sock(newsk);
mptcp: link MPC subflow into msk only after accept Christoph reported the following splat: WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Modules linked in: CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f RSP: 0018:ffffc900037f7948 EFLAGS: 00010293 RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005 RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68 FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0 Call Trace: __tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433 __mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761 __mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127 mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184 inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434 __sock_release+0xd2/0x280 net/socket.c:596 sock_close+0x15/0x20 net/socket.c:1277 __fput+0x276/0x960 fs/file_table.c:281 task_work_run+0x109/0x1d0 kernel/task_work.c:151 get_signal+0xe8f/0x1d40 kernel/signal.c:2561 arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:161 [inline] exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2ac1254469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469 RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003 RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003 After commit 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), the msk's workqueue and/or PM can touch the MPC subflow - and acquire its socket lock - even if it's still unaccepted. If the above event races with the relevant listener socket close, we can end-up with the above splat. This change addresses the issue delaying the MPC socket insertion in conn_list at accept time - that is, partially reverting the blamed commit. We must additionally ensure that mptcp_pm_fully_established() happens after accept() time, or the PM will not be able to handle properly such event - conn_list could be empty otherwise. In the receive path, we check the subflow list node to ensure it is out of the listener queue. Be sure client subflows do not match transiently such condition moving them into the join list earlier at creation time. Since we now have multiple mptcp_pm_fully_established() call sites from different code-paths, said helper can now race with itself. Use an additional PM status bit to avoid multiple notifications. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09 19:03:29 +08:00
/* PM/worker can now acquire the first subflow socket
* lock without racing with listener queue cleanup,
* we can notify it, if needed.
*
* Even if remote has reset the initial subflow by now
* the refcnt is still at least one.
mptcp: link MPC subflow into msk only after accept Christoph reported the following splat: WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Modules linked in: CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f RSP: 0018:ffffc900037f7948 EFLAGS: 00010293 RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005 RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68 FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0 Call Trace: __tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433 __mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761 __mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127 mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184 inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434 __sock_release+0xd2/0x280 net/socket.c:596 sock_close+0x15/0x20 net/socket.c:1277 __fput+0x276/0x960 fs/file_table.c:281 task_work_run+0x109/0x1d0 kernel/task_work.c:151 get_signal+0xe8f/0x1d40 kernel/signal.c:2561 arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:161 [inline] exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2ac1254469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469 RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003 RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003 After commit 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), the msk's workqueue and/or PM can touch the MPC subflow - and acquire its socket lock - even if it's still unaccepted. If the above event races with the relevant listener socket close, we can end-up with the above splat. This change addresses the issue delaying the MPC socket insertion in conn_list at accept time - that is, partially reverting the blamed commit. We must additionally ensure that mptcp_pm_fully_established() happens after accept() time, or the PM will not be able to handle properly such event - conn_list could be empty otherwise. In the receive path, we check the subflow list node to ensure it is out of the listener queue. Be sure client subflows do not match transiently such condition moving them into the join list earlier at creation time. Since we now have multiple mptcp_pm_fully_established() call sites from different code-paths, said helper can now race with itself. Use an additional PM status bit to avoid multiple notifications. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09 19:03:29 +08:00
*/
subflow = mptcp_subflow_ctx(msk->first);
list_add(&subflow->node, &msk->conn_list);
sock_hold(msk->first);
if (mptcp_is_fully_established(newsk))
mptcp_pm_fully_established(msk, msk->first, GFP_KERNEL);
mptcp: link MPC subflow into msk only after accept Christoph reported the following splat: WARNING: CPU: 0 PID: 4615 at net/ipv4/inet_connection_sock.c:1031 inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Modules linked in: CPU: 0 PID: 4615 Comm: syz-executor.4 Not tainted 5.9.0 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_listen_stop+0x8e8/0xad0 net/ipv4/inet_connection_sock.c:1031 Code: 03 00 00 00 e8 79 b2 3d ff e9 ad f9 ff ff e8 1f 76 ba fe be 02 00 00 00 4c 89 f7 e8 62 b2 3d ff e9 14 f9 ff ff e8 08 76 ba fe <0f> 0b e9 97 f8 ff ff e8 fc 75 ba fe be 03 00 00 00 4c 89 f7 e8 3f RSP: 0018:ffffc900037f7948 EFLAGS: 00010293 RAX: ffff88810a349c80 RBX: ffff888114ee1b00 RCX: ffffffff827b14cd RDX: 0000000000000000 RSI: ffffffff827b1c38 RDI: 0000000000000005 RBP: ffff88810a2a8000 R08: ffff88810a349c80 R09: fffff520006fef1f R10: 0000000000000003 R11: fffff520006fef1e R12: ffff888114ee2d00 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff888114ee1d68 FS: 00007f2ac1945700(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd44798bc0 CR3: 0000000109810002 CR4: 0000000000170ef0 Call Trace: __tcp_close+0xd86/0x1110 net/ipv4/tcp.c:2433 __mptcp_close_ssk+0x256/0x430 net/mptcp/protocol.c:1761 __mptcp_destroy_sock+0x49b/0x770 net/mptcp/protocol.c:2127 mptcp_close+0x62d/0x910 net/mptcp/protocol.c:2184 inet_release+0xe9/0x1f0 net/ipv4/af_inet.c:434 __sock_release+0xd2/0x280 net/socket.c:596 sock_close+0x15/0x20 net/socket.c:1277 __fput+0x276/0x960 fs/file_table.c:281 task_work_run+0x109/0x1d0 kernel/task_work.c:151 get_signal+0xe8f/0x1d40 kernel/signal.c:2561 arch_do_signal+0x88/0x1b60 arch/x86/kernel/signal.c:811 exit_to_user_mode_loop kernel/entry/common.c:161 [inline] exit_to_user_mode_prepare+0x9b/0xf0 kernel/entry/common.c:191 syscall_exit_to_user_mode+0x22/0x150 kernel/entry/common.c:266 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f2ac1254469 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48 RSP: 002b:00007f2ac1944dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffbf RBX: 000000000069bf00 RCX: 00007f2ac1254469 RDX: 0000000000000000 RSI: 0000000000008982 RDI: 0000000000000003 RBP: 000000000069bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000069bf0c R13: 00007ffeb53f178f R14: 00000000004668b0 R15: 0000000000000003 After commit 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), the msk's workqueue and/or PM can touch the MPC subflow - and acquire its socket lock - even if it's still unaccepted. If the above event races with the relevant listener socket close, we can end-up with the above splat. This change addresses the issue delaying the MPC socket insertion in conn_list at accept time - that is, partially reverting the blamed commit. We must additionally ensure that mptcp_pm_fully_established() happens after accept() time, or the PM will not be able to handle properly such event - conn_list could be empty otherwise. In the receive path, we check the subflow list node to ensure it is out of the listener queue. Be sure client subflows do not match transiently such condition moving them into the join list earlier at creation time. Since we now have multiple mptcp_pm_fully_established() call sites from different code-paths, said helper can now race with itself. Use an additional PM status bit to avoid multiple notifications. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/103 Fixes: 0397c6d85f9c ("mptcp: keep unaccepted MPC subflow into join list"), Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-09 19:03:29 +08:00
mptcp_copy_inaddrs(newsk, msk->first);
mptcp_rcv_space_init(msk, msk->first);
mptcp_propagate_sndbuf(newsk, msk->first);
/* set ssk->sk_socket of accept()ed flows to mptcp socket.
* This is needed so NOSPACE flag can be set from tcp stack.
*/
mptcp_for_each_subflow(msk, subflow) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
if (!ssk->sk_socket)
mptcp_sock_graft(ssk, newsock);
}
release_sock(newsk);
}
return err;
}
static __poll_t mptcp_check_readable(struct mptcp_sock *msk)
{
mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2dc39 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39 RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003 R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003 Fix the issue by replacing the MPTCP_DATA_READY bit with direct inspection of the msk receive queue. Reported-and-tested-by: syzbot+3360da629681aa0d22fe@syzkaller.appspotmail.com Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08 06:05:00 +08:00
/* Concurrent splices from sk_receive_queue into receive_queue will
* always show at least one non-empty queue when checked in this order.
*/
if (skb_queue_empty_lockless(&((struct sock *)msk)->sk_receive_queue) &&
skb_queue_empty_lockless(&msk->receive_queue))
return 0;
return EPOLLIN | EPOLLRDNORM;
}
static __poll_t mptcp_check_writeable(struct mptcp_sock *msk)
{
struct sock *sk = (struct sock *)msk;
if (unlikely(sk->sk_shutdown & SEND_SHUTDOWN))
return EPOLLOUT | EPOLLWRNORM;
if (sk_stream_is_writeable(sk))
return EPOLLOUT | EPOLLWRNORM;
mptcp_set_nospace(sk);
smp_mb__after_atomic(); /* msk->flags is changed by write_space cb */
if (sk_stream_is_writeable(sk))
return EPOLLOUT | EPOLLWRNORM;
return 0;
}
static __poll_t mptcp_poll(struct file *file, struct socket *sock,
struct poll_table_struct *wait)
{
struct sock *sk = sock->sk;
struct mptcp_sock *msk;
__poll_t mask = 0;
int state;
msk = mptcp_sk(sk);
sock_poll_wait(file, sock, wait);
state = inet_sk_state_load(sk);
pr_debug("msk=%p state=%d flags=%lx", msk, state, msk->flags);
if (state == TCP_LISTEN) {
if (WARN_ON_ONCE(!msk->subflow || !msk->subflow->sk))
return 0;
return inet_csk_listen_poll(msk->subflow->sk);
}
if (state != TCP_SYN_SENT && state != TCP_SYN_RECV) {
mask |= mptcp_check_readable(msk);
mask |= mptcp_check_writeable(msk);
}
if (sk->sk_shutdown == SHUTDOWN_MASK || state == TCP_CLOSE)
mask |= EPOLLHUP;
if (sk->sk_shutdown & RCV_SHUTDOWN)
mask |= EPOLLIN | EPOLLRDNORM | EPOLLRDHUP;
/* This barrier is coupled with smp_wmb() in tcp_reset() */
smp_rmb();
if (sk->sk_err)
mask |= EPOLLERR;
return mask;
}
static const struct proto_ops mptcp_stream_ops = {
.family = PF_INET,
.owner = THIS_MODULE,
.release = inet_release,
.bind = mptcp_bind,
.connect = mptcp_stream_connect,
.socketpair = sock_no_socketpair,
.accept = mptcp_stream_accept,
.getname = inet_getname,
.poll = mptcp_poll,
.ioctl = inet_ioctl,
.gettstamp = sock_gettstamp,
.listen = mptcp_listen,
.shutdown = inet_shutdown,
.setsockopt = sock_common_setsockopt,
.getsockopt = sock_common_getsockopt,
.sendmsg = inet_sendmsg,
.recvmsg = inet_recvmsg,
.mmap = sock_no_mmap,
.sendpage = inet_sendpage,
};
static struct inet_protosw mptcp_protosw = {
.type = SOCK_STREAM,
.protocol = IPPROTO_MPTCP,
.prot = &mptcp_prot,
.ops = &mptcp_stream_ops,
.flags = INET_PROTOSW_ICSK,
};
static int mptcp_napi_poll(struct napi_struct *napi, int budget)
{
struct mptcp_delegated_action *delegated;
struct mptcp_subflow_context *subflow;
int work_done = 0;
delegated = container_of(napi, struct mptcp_delegated_action, napi);
while ((subflow = mptcp_subflow_delegated_next(delegated)) != NULL) {
struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
bh_lock_sock_nested(ssk);
if (!sock_owned_by_user(ssk) &&
mptcp_subflow_has_delegated_action(subflow))
mptcp_subflow_process_delegated(ssk);
/* ... elsewhere tcp_release_cb_override already processed
* the action or will do at next release_sock().
* In both case must dequeue the subflow here - on the same
* CPU that scheduled it.
*/
bh_unlock_sock(ssk);
sock_put(ssk);
if (++work_done == budget)
return budget;
}
/* always provide a 0 'work_done' argument, so that napi_complete_done
* will not try accessing the NULL napi->dev ptr
*/
napi_complete_done(napi, 0);
return work_done;
}
void __init mptcp_proto_init(void)
{
struct mptcp_delegated_action *delegated;
int cpu;
mptcp_prot.h.hashinfo = tcp_prot.h.hashinfo;
if (percpu_counter_init(&mptcp_sockets_allocated, 0, GFP_KERNEL))
panic("Failed to allocate MPTCP pcpu counter\n");
init_dummy_netdev(&mptcp_napi_dev);
for_each_possible_cpu(cpu) {
delegated = per_cpu_ptr(&mptcp_delegated_actions, cpu);
INIT_LIST_HEAD(&delegated->head);
netif_tx_napi_add(&mptcp_napi_dev, &delegated->napi, mptcp_napi_poll,
NAPI_POLL_WEIGHT);
napi_enable(&delegated->napi);
}
mptcp_subflow_init();
mptcp_pm_init();
mptcp_token_init();
if (proto_register(&mptcp_prot, 1) != 0)
panic("Failed to register MPTCP proto.\n");
inet_register_protosw(&mptcp_protosw);
mptcp: update mptcp ack sequence from work queue If userspace is not reading data, all the mptcp-level acks contain the ack_seq from the last time userspace read data rather than the most recent in-sequence value. This causes pointless retransmissions for data that is already queued. The reason for this is that all the mptcp protocol level processing happens at mptcp_recv time. This adds work queue to move skbs from the subflow sockets receive queue on the mptcp socket receive queue (which was not used so far). This allows us to announce the correct mptcp ack sequence in a timely fashion, even when the application does not call recv() on the mptcp socket for some time. We still wake userspace tasks waiting for POLLIN immediately: If the mptcp level receive queue is empty (because the work queue is still pending) it can be filled from in-sequence subflow sockets at recv time without a need to wait for the worker. The skb_orphan when moving skbs from subflow to mptcp level is needed, because the destructor (sock_rfree) relies on skb->sk (ssk!) lock being taken. A followup patch will add needed rmem accouting for the moved skbs. Other problem: In case application behaves as expected, and calls recv() as soon as mptcp socket becomes readable, the work queue will only waste cpu cycles. This will also be addressed in followup patches. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26 17:14:48 +08:00
BUILD_BUG_ON(sizeof(struct mptcp_skb_cb) > sizeof_field(struct sk_buff, cb));
}
#if IS_ENABLED(CONFIG_MPTCP_IPV6)
static const struct proto_ops mptcp_v6_stream_ops = {
.family = PF_INET6,
.owner = THIS_MODULE,
.release = inet6_release,
.bind = mptcp_bind,
.connect = mptcp_stream_connect,
.socketpair = sock_no_socketpair,
.accept = mptcp_stream_accept,
.getname = inet6_getname,
.poll = mptcp_poll,
.ioctl = inet6_ioctl,
.gettstamp = sock_gettstamp,
.listen = mptcp_listen,
.shutdown = inet_shutdown,
.setsockopt = sock_common_setsockopt,
.getsockopt = sock_common_getsockopt,
.sendmsg = inet6_sendmsg,
.recvmsg = inet6_recvmsg,
.mmap = sock_no_mmap,
.sendpage = inet_sendpage,
#ifdef CONFIG_COMPAT
.compat_ioctl = inet6_compat_ioctl,
#endif
};
static struct proto mptcp_v6_prot;
static void mptcp_v6_destroy(struct sock *sk)
{
mptcp_destroy(sk);
inet6_destroy_sock(sk);
}
static struct inet_protosw mptcp_v6_protosw = {
.type = SOCK_STREAM,
.protocol = IPPROTO_MPTCP,
.prot = &mptcp_v6_prot,
.ops = &mptcp_v6_stream_ops,
.flags = INET_PROTOSW_ICSK,
};
int __init mptcp_proto_v6_init(void)
{
int err;
mptcp_v6_prot = mptcp_prot;
strcpy(mptcp_v6_prot.name, "MPTCPv6");
mptcp_v6_prot.slab = NULL;
mptcp_v6_prot.destroy = mptcp_v6_destroy;
mptcp_v6_prot.obj_size = sizeof(struct mptcp6_sock);
err = proto_register(&mptcp_v6_prot, 1);
if (err)
return err;
err = inet6_register_protosw(&mptcp_v6_protosw);
if (err)
proto_unregister(&mptcp_v6_prot);
return err;
}
#endif