linux/sound/soc/cirrus/ep93xx-i2s.c

463 lines
11 KiB
C
Raw Normal View History

/*
* linux/sound/soc/ep93xx-i2s.c
* EP93xx I2S driver
*
* Copyright (C) 2010 Ryan Mallon
*
* Based on the original driver by:
* Copyright (C) 2007 Chase Douglas <chasedouglas@gmail>
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <sound/core.h>
#include <sound/dmaengine_pcm.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <mach/hardware.h>
#include <mach/ep93xx-regs.h>
#include <linux/platform_data/dma-ep93xx.h>
#include "ep93xx-pcm.h"
#define EP93XX_I2S_TXCLKCFG 0x00
#define EP93XX_I2S_RXCLKCFG 0x04
#define EP93XX_I2S_GLCTRL 0x0C
#define EP93XX_I2S_TXLINCTRLDATA 0x28
#define EP93XX_I2S_TXCTRL 0x2C
#define EP93XX_I2S_TXWRDLEN 0x30
#define EP93XX_I2S_TX0EN 0x34
#define EP93XX_I2S_RXLINCTRLDATA 0x58
#define EP93XX_I2S_RXCTRL 0x5C
#define EP93XX_I2S_RXWRDLEN 0x60
#define EP93XX_I2S_RX0EN 0x64
#define EP93XX_I2S_WRDLEN_16 (0 << 0)
#define EP93XX_I2S_WRDLEN_24 (1 << 0)
#define EP93XX_I2S_WRDLEN_32 (2 << 0)
#define EP93XX_I2S_LINCTRLDATA_R_JUST (1 << 2) /* Right justify */
#define EP93XX_I2S_CLKCFG_LRS (1 << 0) /* lrclk polarity */
#define EP93XX_I2S_CLKCFG_CKP (1 << 1) /* Bit clock polarity */
#define EP93XX_I2S_CLKCFG_REL (1 << 2) /* First bit transition */
#define EP93XX_I2S_CLKCFG_MASTER (1 << 3) /* Master mode */
#define EP93XX_I2S_CLKCFG_NBCG (1 << 4) /* Not bit clock gating */
struct ep93xx_i2s_info {
struct clk *mclk;
struct clk *sclk;
struct clk *lrclk;
void __iomem *regs;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
};
static struct ep93xx_dma_data ep93xx_i2s_dma_data[] = {
[SNDRV_PCM_STREAM_PLAYBACK] = {
.name = "i2s-pcm-out",
.port = EP93XX_DMA_I2S1,
.direction = DMA_MEM_TO_DEV,
},
[SNDRV_PCM_STREAM_CAPTURE] = {
.name = "i2s-pcm-in",
.port = EP93XX_DMA_I2S1,
.direction = DMA_DEV_TO_MEM,
},
};
static inline void ep93xx_i2s_write_reg(struct ep93xx_i2s_info *info,
unsigned reg, unsigned val)
{
__raw_writel(val, info->regs + reg);
}
static inline unsigned ep93xx_i2s_read_reg(struct ep93xx_i2s_info *info,
unsigned reg)
{
return __raw_readl(info->regs + reg);
}
static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
{
unsigned base_reg;
int i;
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
/* Enable clocks */
clk_enable(info->mclk);
clk_enable(info->sclk);
clk_enable(info->lrclk);
/* Enable i2s */
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 1);
}
/* Enable fifos */
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
base_reg = EP93XX_I2S_TX0EN;
else
base_reg = EP93XX_I2S_RX0EN;
for (i = 0; i < 3; i++)
ep93xx_i2s_write_reg(info, base_reg + (i * 4), 1);
}
static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
{
unsigned base_reg;
int i;
/* Disable fifos */
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
base_reg = EP93XX_I2S_TX0EN;
else
base_reg = EP93XX_I2S_RX0EN;
for (i = 0; i < 3; i++)
ep93xx_i2s_write_reg(info, base_reg + (i * 4), 0);
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
/* Disable i2s */
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 0);
/* Disable clocks */
clk_disable(info->lrclk);
clk_disable(info->sclk);
clk_disable(info->mclk);
}
}
static int ep93xx_i2s_dai_probe(struct snd_soc_dai *dai)
{
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
info->dma_params_tx.filter_data =
&ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_PLAYBACK];
info->dma_params_rx.filter_data =
&ep93xx_i2s_dma_data[SNDRV_PCM_STREAM_CAPTURE];
dai->playback_dma_data = &info->dma_params_tx;
dai->capture_dma_data = &info->dma_params_rx;
return 0;
}
static void ep93xx_i2s_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
ep93xx_i2s_disable(info, substream->stream);
}
static int ep93xx_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(cpu_dai);
unsigned int clk_cfg, lin_ctrl;
clk_cfg = ep93xx_i2s_read_reg(info, EP93XX_I2S_RXCLKCFG);
lin_ctrl = ep93xx_i2s_read_reg(info, EP93XX_I2S_RXLINCTRLDATA);
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
clk_cfg |= EP93XX_I2S_CLKCFG_REL;
lin_ctrl &= ~EP93XX_I2S_LINCTRLDATA_R_JUST;
break;
case SND_SOC_DAIFMT_LEFT_J:
clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
lin_ctrl &= ~EP93XX_I2S_LINCTRLDATA_R_JUST;
break;
case SND_SOC_DAIFMT_RIGHT_J:
clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
lin_ctrl |= EP93XX_I2S_LINCTRLDATA_R_JUST;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* CPU is master */
clk_cfg |= EP93XX_I2S_CLKCFG_MASTER;
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* Codec is master */
clk_cfg &= ~EP93XX_I2S_CLKCFG_MASTER;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/* Negative bit clock, lrclk low on left word */
clk_cfg &= ~(EP93XX_I2S_CLKCFG_CKP | EP93XX_I2S_CLKCFG_REL);
break;
case SND_SOC_DAIFMT_NB_IF:
/* Negative bit clock, lrclk low on right word */
clk_cfg &= ~EP93XX_I2S_CLKCFG_CKP;
clk_cfg |= EP93XX_I2S_CLKCFG_REL;
break;
case SND_SOC_DAIFMT_IB_NF:
/* Positive bit clock, lrclk low on left word */
clk_cfg |= EP93XX_I2S_CLKCFG_CKP;
clk_cfg &= ~EP93XX_I2S_CLKCFG_REL;
break;
case SND_SOC_DAIFMT_IB_IF:
/* Positive bit clock, lrclk low on right word */
clk_cfg |= EP93XX_I2S_CLKCFG_CKP | EP93XX_I2S_CLKCFG_REL;
break;
}
/* Write new register values */
ep93xx_i2s_write_reg(info, EP93XX_I2S_RXCLKCFG, clk_cfg);
ep93xx_i2s_write_reg(info, EP93XX_I2S_TXCLKCFG, clk_cfg);
ep93xx_i2s_write_reg(info, EP93XX_I2S_RXLINCTRLDATA, lin_ctrl);
ep93xx_i2s_write_reg(info, EP93XX_I2S_TXLINCTRLDATA, lin_ctrl);
return 0;
}
static int ep93xx_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
unsigned word_len, div, sdiv, lrdiv;
int err;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
word_len = EP93XX_I2S_WRDLEN_16;
break;
case SNDRV_PCM_FORMAT_S24_LE:
word_len = EP93XX_I2S_WRDLEN_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
word_len = EP93XX_I2S_WRDLEN_32;
break;
default:
return -EINVAL;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
ep93xx_i2s_write_reg(info, EP93XX_I2S_TXWRDLEN, word_len);
else
ep93xx_i2s_write_reg(info, EP93XX_I2S_RXWRDLEN, word_len);
/*
ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code Changelog: 1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is hardware limitation and that's the way original Cirrus's driver worked. This will fix distorted sound playback and make capture actually work in present ep93xx drivers. I've found, that author of code, on which modern ep93xx-i2s.c and ep93xx-pcm.c are based, had faced this problem also in 2007: http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3 Now SoC code uses his developments, but not overcomes the hardware issues. Some details from EP93xx users guide: Both I2S transmitter and receiver have similar 16x32bit FIFO, where they store 8 samples for both left and right channels. The FIFO is always 32bit wide and should be properly aligned if you use samples of other width. Transmitter and receiver have configuration registers for selection of I2S word length (16, 24, 32). They are I2STXWrdLen and I2SRXWrdLen. Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for transfers to and from peripherals is selected by particular module configuration. Lucky AC97 module has such configuration: AC97RXCRx registers, bit CM (Compact mode enable) switches between 16 and 32 bit samples. AC97TXCRx registers have the same bits for transmitters. ep93xx-ac97.c enables this compact mode and so has all the rights to use S16_LE format. No one has found such a configuration in I2S module until now in any Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit samples consecutively for left and right channels. You cannot use 32-bit DMA transfers to transfer two 16-bit samples. So we can use two formats for AC97, but should remove all but S32_LE for I2S. Always using 32 bit chunks is not a problem for I2S, the codec I use uses less bits too (24), it's permitted by I2S standard. In proposed patch formats list shortened to just S32_LE, this makes all the DMA transactions right, while ALSA will do all sample format translation for us. 2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c masks the first problem. DMA takes two 16 bit samples instead of one, overall sound speed seems to be normal, but you get actually 4000 sampling rate instead of requested 8000 and therefore some noise... This is also the reason why the capture function not worked at all in this driver... If we take a look into I2S specification, we will figure that LRCLK MUST be equal to sample rate, if we are talking about stereo (in mono too, but it's not our case at all). In proposed patch SCLK and LRCLK rates are corrected, assuming we always send 32 bits * 2 channels to codec. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-16 20:48:05 +08:00
* EP93xx I2S module can be setup so SCLK / LRCLK value can be
* 32, 64, 128. MCLK / SCLK value can be 2 and 4.
* We set LRCLK equal to `rate' and minimum SCLK / LRCLK
* value is 64, because our sample size is 32 bit * 2 channels.
* I2S standard permits us to transmit more bits than
* the codec uses.
*/
ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code Changelog: 1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is hardware limitation and that's the way original Cirrus's driver worked. This will fix distorted sound playback and make capture actually work in present ep93xx drivers. I've found, that author of code, on which modern ep93xx-i2s.c and ep93xx-pcm.c are based, had faced this problem also in 2007: http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3 Now SoC code uses his developments, but not overcomes the hardware issues. Some details from EP93xx users guide: Both I2S transmitter and receiver have similar 16x32bit FIFO, where they store 8 samples for both left and right channels. The FIFO is always 32bit wide and should be properly aligned if you use samples of other width. Transmitter and receiver have configuration registers for selection of I2S word length (16, 24, 32). They are I2STXWrdLen and I2SRXWrdLen. Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for transfers to and from peripherals is selected by particular module configuration. Lucky AC97 module has such configuration: AC97RXCRx registers, bit CM (Compact mode enable) switches between 16 and 32 bit samples. AC97TXCRx registers have the same bits for transmitters. ep93xx-ac97.c enables this compact mode and so has all the rights to use S16_LE format. No one has found such a configuration in I2S module until now in any Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit samples consecutively for left and right channels. You cannot use 32-bit DMA transfers to transfer two 16-bit samples. So we can use two formats for AC97, but should remove all but S32_LE for I2S. Always using 32 bit chunks is not a problem for I2S, the codec I use uses less bits too (24), it's permitted by I2S standard. In proposed patch formats list shortened to just S32_LE, this makes all the DMA transactions right, while ALSA will do all sample format translation for us. 2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c masks the first problem. DMA takes two 16 bit samples instead of one, overall sound speed seems to be normal, but you get actually 4000 sampling rate instead of requested 8000 and therefore some noise... This is also the reason why the capture function not worked at all in this driver... If we take a look into I2S specification, we will figure that LRCLK MUST be equal to sample rate, if we are talking about stereo (in mono too, but it's not our case at all). In proposed patch SCLK and LRCLK rates are corrected, assuming we always send 32 bits * 2 channels to codec. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-16 20:48:05 +08:00
div = clk_get_rate(info->mclk) / params_rate(params);
sdiv = 4;
if (div > (256 + 512) / 2) {
lrdiv = 128;
} else {
lrdiv = 64;
if (div < (128 + 256) / 2)
sdiv = 2;
}
err = clk_set_rate(info->sclk, clk_get_rate(info->mclk) / sdiv);
if (err)
return err;
err = clk_set_rate(info->lrclk, clk_get_rate(info->sclk) / lrdiv);
if (err)
return err;
ep93xx_i2s_enable(info, substream->stream);
return 0;
}
static int ep93xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id,
unsigned int freq, int dir)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(cpu_dai);
if (dir == SND_SOC_CLOCK_IN || clk_id != 0)
return -EINVAL;
return clk_set_rate(info->mclk, freq);
}
#ifdef CONFIG_PM
static int ep93xx_i2s_suspend(struct snd_soc_dai *dai)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
if (!dai->active)
return 0;
ep93xx_i2s_disable(info, SNDRV_PCM_STREAM_PLAYBACK);
ep93xx_i2s_disable(info, SNDRV_PCM_STREAM_CAPTURE);
return 0;
}
static int ep93xx_i2s_resume(struct snd_soc_dai *dai)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = snd_soc_dai_get_drvdata(dai);
if (!dai->active)
return 0;
ep93xx_i2s_enable(info, SNDRV_PCM_STREAM_PLAYBACK);
ep93xx_i2s_enable(info, SNDRV_PCM_STREAM_CAPTURE);
return 0;
}
#else
#define ep93xx_i2s_suspend NULL
#define ep93xx_i2s_resume NULL
#endif
static const struct snd_soc_dai_ops ep93xx_i2s_dai_ops = {
.shutdown = ep93xx_i2s_shutdown,
.hw_params = ep93xx_i2s_hw_params,
.set_sysclk = ep93xx_i2s_set_sysclk,
.set_fmt = ep93xx_i2s_set_dai_fmt,
};
ASoC: EP93xx: fixed LRCLK rate and DMA oper. in I2S code Changelog: 1. I2S module of EP93xx should be feed by 32bit DMA transfers. This is hardware limitation and that's the way original Cirrus's driver worked. This will fix distorted sound playback and make capture actually work in present ep93xx drivers. I've found, that author of code, on which modern ep93xx-i2s.c and ep93xx-pcm.c are based, had faced this problem also in 2007: http://blog.gmane.org/gmane.linux.ports.arm.cirrus/month=20070101/page=3 Now SoC code uses his developments, but not overcomes the hardware issues. Some details from EP93xx users guide: Both I2S transmitter and receiver have similar 16x32bit FIFO, where they store 8 samples for both left and right channels. The FIFO is always 32bit wide and should be properly aligned if you use samples of other width. Transmitter and receiver have configuration registers for selection of I2S word length (16, 24, 32). They are I2STXWrdLen and I2SRXWrdLen. Yes, EP93xx DMA can do byte, word and quad-word transfers. The width for transfers to and from peripherals is selected by particular module configuration. Lucky AC97 module has such configuration: AC97RXCRx registers, bit CM (Compact mode enable) switches between 16 and 32 bit samples. AC97TXCRx registers have the same bits for transmitters. ep93xx-ac97.c enables this compact mode and so has all the rights to use S16_LE format. No one has found such a configuration in I2S module until now in any Cirrus manuals. I2S module always feeds it's 32bit wide FIFO with 32bit samples consecutively for left and right channels. You cannot use 32-bit DMA transfers to transfer two 16-bit samples. So we can use two formats for AC97, but should remove all but S32_LE for I2S. Always using 32 bit chunks is not a problem for I2S, the codec I use uses less bits too (24), it's permitted by I2S standard. In proposed patch formats list shortened to just S32_LE, this makes all the DMA transactions right, while ALSA will do all sample format translation for us. 2. Incorrect setting of LRCLK (2 times slower) in original ep93xx-i2s.c masks the first problem. DMA takes two 16 bit samples instead of one, overall sound speed seems to be normal, but you get actually 4000 sampling rate instead of requested 8000 and therefore some noise... This is also the reason why the capture function not worked at all in this driver... If we take a look into I2S specification, we will figure that LRCLK MUST be equal to sample rate, if we are talking about stereo (in mono too, but it's not our case at all). In proposed patch SCLK and LRCLK rates are corrected, assuming we always send 32 bits * 2 channels to codec. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-01-16 20:48:05 +08:00
#define EP93XX_I2S_FORMATS (SNDRV_PCM_FMTBIT_S32_LE)
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
static struct snd_soc_dai_driver ep93xx_i2s_dai = {
.symmetric_rates= 1,
.probe = ep93xx_i2s_dai_probe,
.suspend = ep93xx_i2s_suspend,
.resume = ep93xx_i2s_resume,
.playback = {
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = EP93XX_I2S_FORMATS,
},
.capture = {
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = EP93XX_I2S_FORMATS,
},
.ops = &ep93xx_i2s_dai_ops,
};
static const struct snd_soc_component_driver ep93xx_i2s_component = {
.name = "ep93xx-i2s",
};
static int ep93xx_i2s_probe(struct platform_device *pdev)
{
struct ep93xx_i2s_info *info;
struct resource *res;
int err;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
info->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
info->mclk = clk_get(&pdev->dev, "mclk");
if (IS_ERR(info->mclk)) {
err = PTR_ERR(info->mclk);
goto fail;
}
info->sclk = clk_get(&pdev->dev, "sclk");
if (IS_ERR(info->sclk)) {
err = PTR_ERR(info->sclk);
goto fail_put_mclk;
}
info->lrclk = clk_get(&pdev->dev, "lrclk");
if (IS_ERR(info->lrclk)) {
err = PTR_ERR(info->lrclk);
goto fail_put_sclk;
}
dev_set_drvdata(&pdev->dev, info);
err = snd_soc_register_component(&pdev->dev, &ep93xx_i2s_component,
&ep93xx_i2s_dai, 1);
if (err)
goto fail_put_lrclk;
err = devm_ep93xx_pcm_platform_register(&pdev->dev);
if (err)
goto fail_unregister;
return 0;
fail_unregister:
snd_soc_unregister_component(&pdev->dev);
fail_put_lrclk:
clk_put(info->lrclk);
fail_put_sclk:
clk_put(info->sclk);
fail_put_mclk:
clk_put(info->mclk);
fail:
return err;
}
static int ep93xx_i2s_remove(struct platform_device *pdev)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct ep93xx_i2s_info *info = dev_get_drvdata(&pdev->dev);
snd_soc_unregister_component(&pdev->dev);
clk_put(info->lrclk);
clk_put(info->sclk);
clk_put(info->mclk);
return 0;
}
static struct platform_driver ep93xx_i2s_driver = {
.probe = ep93xx_i2s_probe,
.remove = ep93xx_i2s_remove,
.driver = {
.name = "ep93xx-i2s",
},
};
module_platform_driver(ep93xx_i2s_driver);
MODULE_ALIAS("platform:ep93xx-i2s");
MODULE_AUTHOR("Ryan Mallon");
MODULE_DESCRIPTION("EP93XX I2S driver");
MODULE_LICENSE("GPL");