linux/drivers/cxl/acpi.c

446 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2021 Intel Corporation. All rights reserved. */
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/pci.h>
#include "cxl.h"
#include "pci.h"
/* Encode defined in CXL 2.0 8.2.5.12.7 HDM Decoder Control Register */
#define CFMWS_INTERLEAVE_WAYS(x) (1 << (x)->interleave_ways)
#define CFMWS_INTERLEAVE_GRANULARITY(x) ((x)->granularity + 8)
static unsigned long cfmws_to_decoder_flags(int restrictions)
{
unsigned long flags = 0;
if (restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE2)
flags |= CXL_DECODER_F_TYPE2;
if (restrictions & ACPI_CEDT_CFMWS_RESTRICT_TYPE3)
flags |= CXL_DECODER_F_TYPE3;
if (restrictions & ACPI_CEDT_CFMWS_RESTRICT_VOLATILE)
flags |= CXL_DECODER_F_RAM;
if (restrictions & ACPI_CEDT_CFMWS_RESTRICT_PMEM)
flags |= CXL_DECODER_F_PMEM;
if (restrictions & ACPI_CEDT_CFMWS_RESTRICT_FIXED)
flags |= CXL_DECODER_F_LOCK;
return flags;
}
static int cxl_acpi_cfmws_verify(struct device *dev,
struct acpi_cedt_cfmws *cfmws)
{
int expected_len;
if (cfmws->interleave_arithmetic != ACPI_CEDT_CFMWS_ARITHMETIC_MODULO) {
dev_err(dev, "CFMWS Unsupported Interleave Arithmetic\n");
return -EINVAL;
}
if (!IS_ALIGNED(cfmws->base_hpa, SZ_256M)) {
dev_err(dev, "CFMWS Base HPA not 256MB aligned\n");
return -EINVAL;
}
if (!IS_ALIGNED(cfmws->window_size, SZ_256M)) {
dev_err(dev, "CFMWS Window Size not 256MB aligned\n");
return -EINVAL;
}
if (CFMWS_INTERLEAVE_WAYS(cfmws) > CXL_DECODER_MAX_INTERLEAVE) {
dev_err(dev, "CFMWS Interleave Ways (%d) too large\n",
CFMWS_INTERLEAVE_WAYS(cfmws));
return -EINVAL;
}
expected_len = struct_size((cfmws), interleave_targets,
CFMWS_INTERLEAVE_WAYS(cfmws));
if (cfmws->header.length < expected_len) {
dev_err(dev, "CFMWS length %d less than expected %d\n",
cfmws->header.length, expected_len);
return -EINVAL;
}
if (cfmws->header.length > expected_len)
dev_dbg(dev, "CFMWS length %d greater than expected %d\n",
cfmws->header.length, expected_len);
return 0;
}
struct cxl_cfmws_context {
struct device *dev;
struct cxl_port *root_port;
};
static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg,
const unsigned long end)
{
int target_map[CXL_DECODER_MAX_INTERLEAVE];
struct cxl_cfmws_context *ctx = arg;
struct cxl_port *root_port = ctx->root_port;
struct device *dev = ctx->dev;
struct acpi_cedt_cfmws *cfmws;
struct cxl_decoder *cxld;
int rc, i;
cfmws = (struct acpi_cedt_cfmws *) header;
rc = cxl_acpi_cfmws_verify(dev, cfmws);
if (rc) {
dev_err(dev, "CFMWS range %#llx-%#llx not registered\n",
cfmws->base_hpa,
cfmws->base_hpa + cfmws->window_size - 1);
return 0;
}
for (i = 0; i < CFMWS_INTERLEAVE_WAYS(cfmws); i++)
target_map[i] = cfmws->interleave_targets[i];
cxld = cxl_decoder_alloc(root_port, CFMWS_INTERLEAVE_WAYS(cfmws));
if (IS_ERR(cxld))
return 0;
cxld->flags = cfmws_to_decoder_flags(cfmws->restrictions);
cxld->target_type = CXL_DECODER_EXPANDER;
cxld->range = (struct range){
.start = cfmws->base_hpa,
.end = cfmws->base_hpa + cfmws->window_size - 1,
};
cxld->interleave_ways = CFMWS_INTERLEAVE_WAYS(cfmws);
cxld->interleave_granularity = CFMWS_INTERLEAVE_GRANULARITY(cfmws);
rc = cxl_decoder_add(cxld, target_map);
if (rc)
put_device(&cxld->dev);
else
rc = cxl_decoder_autoremove(dev, cxld);
if (rc) {
dev_err(dev, "Failed to add decoder for %#llx-%#llx\n",
cfmws->base_hpa,
cfmws->base_hpa + cfmws->window_size - 1);
return 0;
}
dev_dbg(dev, "add: %s node: %d range %#llx-%#llx\n",
dev_name(&cxld->dev), phys_to_target_node(cxld->range.start),
cfmws->base_hpa, cfmws->base_hpa + cfmws->window_size - 1);
return 0;
}
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-15 03:14:22 +08:00
__mock int match_add_root_ports(struct pci_dev *pdev, void *data)
{
resource_size_t creg = CXL_RESOURCE_NONE;
struct cxl_walk_context *ctx = data;
struct pci_bus *root_bus = ctx->root;
struct cxl_port *port = ctx->port;
int type = pci_pcie_type(pdev);
struct device *dev = ctx->dev;
struct cxl_register_map map;
u32 lnkcap, port_num;
int rc;
if (pdev->bus != root_bus)
return 0;
if (!pci_is_pcie(pdev))
return 0;
if (type != PCI_EXP_TYPE_ROOT_PORT)
return 0;
if (pci_read_config_dword(pdev, pci_pcie_cap(pdev) + PCI_EXP_LNKCAP,
&lnkcap) != PCIBIOS_SUCCESSFUL)
return 0;
/* The driver doesn't rely on component registers for Root Ports yet. */
rc = cxl_find_regblock(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
if (!rc)
dev_info(&pdev->dev, "No component register block found\n");
creg = cxl_regmap_to_base(pdev, &map);
port_num = FIELD_GET(PCI_EXP_LNKCAP_PN, lnkcap);
rc = cxl_add_dport(port, &pdev->dev, port_num, creg);
if (rc) {
ctx->error = rc;
return rc;
}
ctx->count++;
dev_dbg(dev, "add dport%d: %s\n", port_num, dev_name(&pdev->dev));
return 0;
}
static struct cxl_dport *find_dport_by_dev(struct cxl_port *port, struct device *dev)
{
struct cxl_dport *dport;
device_lock(&port->dev);
list_for_each_entry(dport, &port->dports, list)
if (dport->dport == dev) {
device_unlock(&port->dev);
return dport;
}
device_unlock(&port->dev);
return NULL;
}
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-15 03:14:22 +08:00
__mock struct acpi_device *to_cxl_host_bridge(struct device *host,
struct device *dev)
{
struct acpi_device *adev = to_acpi_device(dev);
if (!acpi_pci_find_root(adev->handle))
return NULL;
if (strcmp(acpi_device_hid(adev), "ACPI0016") == 0)
return adev;
return NULL;
}
/*
* A host bridge is a dport to a CFMWS decode and it is a uport to the
* dport (PCIe Root Ports) in the host bridge.
*/
static int add_host_bridge_uport(struct device *match, void *arg)
{
struct cxl_port *root_port = arg;
struct device *host = root_port->dev.parent;
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-15 03:14:22 +08:00
struct acpi_device *bridge = to_cxl_host_bridge(host, match);
struct acpi_pci_root *pci_root;
struct cxl_walk_context ctx;
int single_port_map[1], rc;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
struct cxl_decoder *cxld;
struct cxl_dport *dport;
struct cxl_port *port;
if (!bridge)
return 0;
dport = find_dport_by_dev(root_port, match);
if (!dport) {
dev_dbg(host, "host bridge expected and not found\n");
return 0;
}
port = devm_cxl_add_port(host, match, dport->component_reg_phys,
root_port);
if (IS_ERR(port))
return PTR_ERR(port);
dev_dbg(host, "%s: add: %s\n", dev_name(match), dev_name(&port->dev));
/*
* Note that this lookup already succeeded in
* to_cxl_host_bridge(), so no need to check for failure here
*/
pci_root = acpi_pci_find_root(bridge->handle);
ctx = (struct cxl_walk_context){
.dev = host,
.root = pci_root->bus,
.port = port,
};
pci_walk_bus(pci_root->bus, match_add_root_ports, &ctx);
if (ctx.count == 0)
return -ENODEV;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
if (ctx.error)
return ctx.error;
if (ctx.count > 1)
return 0;
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
/* TODO: Scan CHBCR for HDM Decoder resources */
/*
* Per the CXL specification (8.2.5.12 CXL HDM Decoder Capability
* Structure) single ported host-bridges need not publish a decoder
* capability when a passthrough decode can be assumed, i.e. all
* transactions that the uport sees are claimed and passed to the single
* dport. Disable the range until the first CXL region is enumerated /
* activated.
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
*/
cxld = cxl_decoder_alloc(port, 1);
if (IS_ERR(cxld))
return PTR_ERR(cxld);
cxld->interleave_ways = 1;
cxld->interleave_granularity = PAGE_SIZE;
cxld->target_type = CXL_DECODER_EXPANDER;
cxld->range = (struct range) {
.start = 0,
.end = -1,
};
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
device_lock(&port->dev);
dport = list_first_entry(&port->dports, typeof(*dport), list);
device_unlock(&port->dev);
cxl/acpi: Introduce cxl_decoder objects A cxl_decoder is a child of a cxl_port. It represents a hardware decoder configuration of an upstream port to one or more of its downstream ports. The decoder is either represented in CXL standard HDM decoder registers (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure), or it is a static decode configuration communicated by platform firmware (see the CXL Early Discovery Table: Fixed Memory Window Structure). The firmware described and hardware described decoders differ slightly leading to 2 different sub-types of decoders, cxl_decoder_root and cxl_decoder_switch. At the root level the decode capabilities restrict what can be mapped beneath them. Mid-level switch decoders are configured for either acclerator (type-2) or memory-expander (type-3) operation, but they are otherwise agnostic to the type of memory (volatile vs persistent) being mapped. Here is an example topology from a single-ported host-bridge environment without CFMWS decodes enumerated. /sys/bus/cxl/devices/root0 ├── devtype ├── dport0 -> ../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── port1 │   ├── decoder1.0 │   │   ├── devtype │   │   ├── locked │   │   ├── size │   │   ├── start │   │   ├── subsystem -> ../../../../../../bus/cxl │   │   ├── target_list │   │   ├── target_type │   │   └── uevent │   ├── devtype │   ├── dport0 -> ../../../../pci0000:34/0000:34:00.0 │   ├── subsystem -> ../../../../../bus/cxl │   ├── uevent │   └── uport -> ../../../../LNXSYSTM:00/LNXSYBUS:00/ACPI0016:00 ├── subsystem -> ../../../../bus/cxl ├── uevent └── uport -> ../../ACPI0017:00 Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/162325695128.2293823.17519927266014762694.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-06-10 00:43:29 +08:00
single_port_map[0] = dport->port_id;
rc = cxl_decoder_add(cxld, single_port_map);
if (rc)
put_device(&cxld->dev);
else
rc = cxl_decoder_autoremove(host, cxld);
if (rc == 0)
dev_dbg(host, "add: %s\n", dev_name(&cxld->dev));
return rc;
}
struct cxl_chbs_context {
struct device *dev;
unsigned long long uid;
resource_size_t chbcr;
};
static int cxl_get_chbcr(union acpi_subtable_headers *header, void *arg,
const unsigned long end)
{
struct cxl_chbs_context *ctx = arg;
struct acpi_cedt_chbs *chbs;
if (ctx->chbcr)
return 0;
chbs = (struct acpi_cedt_chbs *) header;
if (ctx->uid != chbs->uid)
return 0;
ctx->chbcr = chbs->base;
return 0;
}
static int add_host_bridge_dport(struct device *match, void *arg)
{
int rc;
acpi_status status;
unsigned long long uid;
struct cxl_chbs_context ctx;
struct cxl_port *root_port = arg;
struct device *host = root_port->dev.parent;
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-15 03:14:22 +08:00
struct acpi_device *bridge = to_cxl_host_bridge(host, match);
if (!bridge)
return 0;
status = acpi_evaluate_integer(bridge->handle, METHOD_NAME__UID, NULL,
&uid);
if (status != AE_OK) {
dev_err(host, "unable to retrieve _UID of %s\n",
dev_name(match));
return -ENODEV;
}
ctx = (struct cxl_chbs_context) {
.dev = host,
.uid = uid,
};
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CHBS, cxl_get_chbcr, &ctx);
if (ctx.chbcr == 0) {
dev_warn(host, "No CHBS found for Host Bridge: %s\n",
dev_name(match));
return 0;
}
rc = cxl_add_dport(root_port, match, uid, ctx.chbcr);
if (rc) {
dev_err(host, "failed to add downstream port: %s\n",
dev_name(match));
return rc;
}
dev_dbg(host, "add dport%llu: %s\n", uid, dev_name(match));
return 0;
}
static int add_root_nvdimm_bridge(struct device *match, void *data)
{
struct cxl_decoder *cxld;
struct cxl_port *root_port = data;
struct cxl_nvdimm_bridge *cxl_nvb;
struct device *host = root_port->dev.parent;
if (!is_root_decoder(match))
return 0;
cxld = to_cxl_decoder(match);
if (!(cxld->flags & CXL_DECODER_F_PMEM))
return 0;
cxl_nvb = devm_cxl_add_nvdimm_bridge(host, root_port);
if (IS_ERR(cxl_nvb)) {
dev_dbg(host, "failed to register pmem\n");
return PTR_ERR(cxl_nvb);
}
dev_dbg(host, "%s: add: %s\n", dev_name(&root_port->dev),
dev_name(&cxl_nvb->dev));
return 1;
}
static int cxl_acpi_probe(struct platform_device *pdev)
{
int rc;
struct cxl_port *root_port;
struct device *host = &pdev->dev;
struct acpi_device *adev = ACPI_COMPANION(host);
struct cxl_cfmws_context ctx;
root_port = devm_cxl_add_port(host, host, CXL_RESOURCE_NONE, NULL);
if (IS_ERR(root_port))
return PTR_ERR(root_port);
dev_dbg(host, "add: %s\n", dev_name(&root_port->dev));
rc = bus_for_each_dev(adev->dev.bus, NULL, root_port,
add_host_bridge_dport);
if (rc < 0)
return rc;
ctx = (struct cxl_cfmws_context) {
.dev = host,
.root_port = root_port,
};
acpi_table_parse_cedt(ACPI_CEDT_TYPE_CFMWS, cxl_parse_cfmws, &ctx);
/*
* Root level scanned with host-bridge as dports, now scan host-bridges
* for their role as CXL uports to their CXL-capable PCIe Root Ports.
*/
rc = bus_for_each_dev(adev->dev.bus, NULL, root_port,
add_host_bridge_uport);
if (rc < 0)
return rc;
if (IS_ENABLED(CONFIG_CXL_PMEM))
rc = device_for_each_child(&root_port->dev, root_port,
add_root_nvdimm_bridge);
if (rc < 0)
return rc;
return 0;
}
static const struct acpi_device_id cxl_acpi_ids[] = {
{ "ACPI0017" },
tools/testing/cxl: Introduce a mocked-up CXL port hierarchy Create an environment for CXL plumbing unit tests. Especially when it comes to an algorithm for HDM Decoder (Host-managed Device Memory Decoder) programming, the availability of an in-kernel-tree emulation environment for CXL configuration complexity and corner cases speeds development and deters regressions. The approach taken mirrors what was done for tools/testing/nvdimm/. I.e. an external module, cxl_test.ko built out of the tools/testing/cxl/ directory, provides mock implementations of kernel APIs and kernel objects to simulate a real world device hierarchy. One feedback for the tools/testing/nvdimm/ proposal was "why not do this in QEMU?". In fact, the CXL development community has developed a QEMU model for CXL [1]. However, there are a few blocking issues that keep QEMU from being a tight fit for topology + provisioning unit tests: 1/ The QEMU community has yet to show interest in merging any of this support that has had patches on the list since November 2020. So, testing CXL to date involves building custom QEMU with out-of-tree patches. 2/ CXL mechanisms like cross-host-bridge interleave do not have a clear path to be emulated by QEMU without major infrastructure work. This is easier to achieve with the alloc_mock_res() approach taken in this patch to shortcut-define emulated system physical address ranges with interleave behavior. The QEMU enabling has been critical to get the driver off the ground, and may still move forward, but it does not address the ongoing needs of a regression testing environment and test driven development. This patch adds an ACPI CXL Platform definition with emulated CXL multi-ported host-bridges. A follow on patch adds emulated memory expander devices. Acked-by: Ben Widawsky <ben.widawsky@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20210202005948.241655-1-ben.widawsky@intel.com [1] Link: https://lore.kernel.org/r/163164680798.2831381.838684634806668012.stgit@dwillia2-desk3.amr.corp.intel.com Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2021-09-15 03:14:22 +08:00
{ },
};
MODULE_DEVICE_TABLE(acpi, cxl_acpi_ids);
static struct platform_driver cxl_acpi_driver = {
.probe = cxl_acpi_probe,
.driver = {
.name = KBUILD_MODNAME,
.acpi_match_table = cxl_acpi_ids,
},
};
module_platform_driver(cxl_acpi_driver);
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(CXL);
MODULE_IMPORT_NS(ACPI);