linux/drivers/gpu/drm/mgag200/mgag200_mode.c

1753 lines
41 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2010 Matt Turner.
* Copyright 2012 Red Hat
*
* Authors: Matthew Garrett
* Matt Turner
* Dave Airlie
*/
#include <linux/delay.h>
#include <linux/dma-buf-map.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_atomic_state_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_damage_helper.h>
#include <drm/drm_format_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_atomic_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_print.h>
drm: Split out drm_probe_helper.h Having the probe helper stuff (which pretty much everyone needs) in the drm_crtc_helper.h file (which atomic drivers should never need) is confusing. Split them out. To make sure I actually achieved the goal here I went through all drivers. And indeed, all atomic drivers are now free of drm_crtc_helper.h includes. v2: Make it compile. There was so much compile fail on arm drivers that I figured I'll better not include any of the acks on v1. v3: Massive rebase because i915 has lost a lot of drmP.h includes, but not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h there was still one, which this patch largely removes. Which means rolling out lots more includes all over. This will also conflict with ongoing drmP.h cleanup by others I expect. v3: Rebase on top of atomic bochs. v4: Review from Laurent for bridge/rcar/omap/shmob/core bits: - (re)move some of the added includes, use the better include files in other places (all suggested from Laurent adopted unchanged). - sort alphabetically v5: Actually try to sort them, and while at it, sort all the ones I touch. v6: Rebase onto i915 changes. v7: Rebase once more. Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: CK Hu <ck.hu@mediatek.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: virtualization@lists.linux-foundation.org Cc: etnaviv@lists.freedesktop.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-tegra@vger.kernel.org Cc: xen-devel@lists.xen.org Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
2019-01-18 05:03:34 +08:00
#include <drm/drm_probe_helper.h>
#include <drm/drm_simple_kms_helper.h>
#include "mgag200_drv.h"
#define MGAG200_LUT_SIZE 256
/*
* This file contains setup code for the CRTC.
*/
static void mga_crtc_load_lut(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = to_mga_device(dev);
struct drm_framebuffer *fb;
u16 *r_ptr, *g_ptr, *b_ptr;
int i;
if (!crtc->enabled)
return;
if (!mdev->display_pipe.plane.state)
return;
fb = mdev->display_pipe.plane.state->fb;
r_ptr = crtc->gamma_store;
g_ptr = r_ptr + crtc->gamma_size;
b_ptr = g_ptr + crtc->gamma_size;
WREG8(DAC_INDEX + MGA1064_INDEX, 0);
drm: Nuke fb->bits_per_pixel Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8. Less duplicated information is a good thing. Note that I didn't put parens around the cpp*8 in the below cocci script, on account of not wanting spurious parens all over the place. Instead I did the unsafe way, and tried to look over the entire diff to spot if any dangerous expressions were produced. I didn't see any. There are some cases where previously the code did X*bpp/8, so the division happened after the multiplication. Those are now just X*cpp so the division effectively happens before the multiplication, but that is perfectly fine since bpp is always a multiple of 8. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->bits_per_pixel = E; ... } @@ struct drm_framebuffer FB; expression E; @@ ( - E * FB.bits_per_pixel / 8 + E * FB.format->cpp[0] | - FB.bits_per_pixel / 8 + FB.format->cpp[0] | - E * FB.bits_per_pixel >> 3 + E * FB.format->cpp[0] | - FB.bits_per_pixel >> 3 + FB.format->cpp[0] | - (FB.bits_per_pixel + 7) / 8 + FB.format->cpp[0] | - FB.bits_per_pixel + FB.format->cpp[0] * 8 | - FB.format->cpp[0] * 8 != 8 + FB.format->cpp[0] != 1 ) @@ struct drm_framebuffer *FB; expression E; @@ ( - E * FB->bits_per_pixel / 8 + E * FB->format->cpp[0] | - FB->bits_per_pixel / 8 + FB->format->cpp[0] | - E * FB->bits_per_pixel >> 3 + E * FB->format->cpp[0] | - FB->bits_per_pixel >> 3 + FB->format->cpp[0] | - (FB->bits_per_pixel + 7) / 8 + FB->format->cpp[0] | - FB->bits_per_pixel + FB->format->cpp[0] * 8 | - FB->format->cpp[0] * 8 != 8 + FB->format->cpp[0] != 1 ) @@ struct drm_plane_state *state; expression E; @@ ( - E * state->fb->bits_per_pixel / 8 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel / 8 + state->fb->format->cpp[0] | - E * state->fb->bits_per_pixel >> 3 + E * state->fb->format->cpp[0] | - state->fb->bits_per_pixel >> 3 + state->fb->format->cpp[0] | - (state->fb->bits_per_pixel + 7) / 8 + state->fb->format->cpp[0] | - state->fb->bits_per_pixel + state->fb->format->cpp[0] * 8 | - state->fb->format->cpp[0] * 8 != 8 + state->fb->format->cpp[0] != 1 ) @@ @@ - (8 * 8) + 8 * 8 @@ struct drm_framebuffer FB; @@ - (FB.format->cpp[0]) + FB.format->cpp[0] @@ struct drm_framebuffer *FB; @@ - (FB->format->cpp[0]) + FB->format->cpp[0] @@ @@ struct drm_framebuffer { ... - int bits_per_pixel; ... }; v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent) v3: Adjusted the semantic patch a bit and regenerated due to code changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 05:32:20 +08:00
if (fb && fb->format->cpp[0] * 8 == 16) {
int inc = (fb->format->depth == 15) ? 8 : 4;
u8 r, b;
for (i = 0; i < MGAG200_LUT_SIZE; i += inc) {
if (fb->format->depth == 16) {
if (i > (MGAG200_LUT_SIZE >> 1)) {
r = b = 0;
} else {
r = *r_ptr++ >> 8;
b = *b_ptr++ >> 8;
r_ptr++;
b_ptr++;
}
} else {
r = *r_ptr++ >> 8;
b = *b_ptr++ >> 8;
}
/* VGA registers */
WREG8(DAC_INDEX + MGA1064_COL_PAL, r);
WREG8(DAC_INDEX + MGA1064_COL_PAL, *g_ptr++ >> 8);
WREG8(DAC_INDEX + MGA1064_COL_PAL, b);
}
return;
}
for (i = 0; i < MGAG200_LUT_SIZE; i++) {
/* VGA registers */
WREG8(DAC_INDEX + MGA1064_COL_PAL, *r_ptr++ >> 8);
WREG8(DAC_INDEX + MGA1064_COL_PAL, *g_ptr++ >> 8);
WREG8(DAC_INDEX + MGA1064_COL_PAL, *b_ptr++ >> 8);
}
}
static inline void mga_wait_vsync(struct mga_device *mdev)
{
unsigned long timeout = jiffies + HZ/10;
unsigned int status = 0;
do {
status = RREG32(MGAREG_Status);
} while ((status & 0x08) && time_before(jiffies, timeout));
timeout = jiffies + HZ/10;
status = 0;
do {
status = RREG32(MGAREG_Status);
} while (!(status & 0x08) && time_before(jiffies, timeout));
}
static inline void mga_wait_busy(struct mga_device *mdev)
{
unsigned long timeout = jiffies + HZ;
unsigned int status = 0;
do {
status = RREG8(MGAREG_Status + 2);
} while ((status & 0x01) && time_before(jiffies, timeout));
}
/*
* PLL setup
*/
static int mgag200_g200_set_plls(struct mga_device *mdev, long clock)
{
struct drm_device *dev = &mdev->base;
const int post_div_max = 7;
const int in_div_min = 1;
const int in_div_max = 6;
const int feed_div_min = 7;
const int feed_div_max = 127;
u8 testm, testn;
u8 n = 0, m = 0, p, s;
long f_vco;
long computed;
long delta, tmp_delta;
long ref_clk = mdev->model.g200.ref_clk;
long p_clk_min = mdev->model.g200.pclk_min;
long p_clk_max = mdev->model.g200.pclk_max;
if (clock > p_clk_max) {
drm_err(dev, "Pixel Clock %ld too high\n", clock);
return 1;
}
if (clock < p_clk_min >> 3)
clock = p_clk_min >> 3;
f_vco = clock;
for (p = 0;
p <= post_div_max && f_vco < p_clk_min;
p = (p << 1) + 1, f_vco <<= 1)
;
delta = clock;
for (testm = in_div_min; testm <= in_div_max; testm++) {
for (testn = feed_div_min; testn <= feed_div_max; testn++) {
computed = ref_clk * (testn + 1) / (testm + 1);
if (computed < f_vco)
tmp_delta = f_vco - computed;
else
tmp_delta = computed - f_vco;
if (tmp_delta < delta) {
delta = tmp_delta;
m = testm;
n = testn;
}
}
}
f_vco = ref_clk * (n + 1) / (m + 1);
if (f_vco < 100000)
s = 0;
else if (f_vco < 140000)
s = 1;
else if (f_vco < 180000)
s = 2;
else
s = 3;
drm_dbg_kms(dev, "clock: %ld vco: %ld m: %d n: %d p: %d s: %d\n",
clock, f_vco, m, n, p, s);
WREG_DAC(MGA1064_PIX_PLLC_M, m);
WREG_DAC(MGA1064_PIX_PLLC_N, n);
WREG_DAC(MGA1064_PIX_PLLC_P, (p | (s << 3)));
return 0;
}
#define P_ARRAY_SIZE 9
static int mga_g200se_set_plls(struct mga_device *mdev, long clock)
{
u32 unique_rev_id = mdev->model.g200se.unique_rev_id;
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta, permitteddelta;
unsigned int testp, testm, testn;
unsigned int p, m, n;
unsigned int computed;
unsigned int pvalues_e4[P_ARRAY_SIZE] = {16, 14, 12, 10, 8, 6, 4, 2, 1};
unsigned int fvv;
unsigned int i;
if (unique_rev_id <= 0x03) {
m = n = p = 0;
vcomax = 320000;
vcomin = 160000;
pllreffreq = 25000;
delta = 0xffffffff;
permitteddelta = clock * 5 / 1000;
for (testp = 8; testp > 0; testp /= 2) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testn = 17; testn < 256; testn++) {
for (testm = 1; testm < 32; testm++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = testm - 1;
n = testn - 1;
p = testp - 1;
}
}
}
}
} else {
m = n = p = 0;
vcomax = 1600000;
vcomin = 800000;
pllreffreq = 25000;
if (clock < 25000)
clock = 25000;
clock = clock * 2;
delta = 0xFFFFFFFF;
/* Permited delta is 0.5% as VESA Specification */
permitteddelta = clock * 5 / 1000;
for (i = 0 ; i < P_ARRAY_SIZE ; i++) {
testp = pvalues_e4[i];
if ((clock * testp) > vcomax)
continue;
if ((clock * testp) < vcomin)
continue;
for (testn = 50; testn <= 256; testn++) {
for (testm = 1; testm <= 32; testm++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = testm - 1;
n = testn - 1;
p = testp - 1;
}
}
}
}
fvv = pllreffreq * (n + 1) / (m + 1);
fvv = (fvv - 800000) / 50000;
if (fvv > 15)
fvv = 15;
p |= (fvv << 4);
m |= 0x80;
clock = clock / 2;
}
if (delta > permitteddelta) {
pr_warn("PLL delta too large\n");
return 1;
}
WREG_DAC(MGA1064_PIX_PLLC_M, m);
WREG_DAC(MGA1064_PIX_PLLC_N, n);
WREG_DAC(MGA1064_PIX_PLLC_P, p);
if (unique_rev_id >= 0x04) {
WREG_DAC(0x1a, 0x09);
msleep(20);
WREG_DAC(0x1a, 0x01);
}
return 0;
}
static int mga_g200wb_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
unsigned int testp, testm, testn, testp2;
unsigned int p, m, n;
unsigned int computed;
int i, j, tmpcount, vcount;
bool pll_locked = false;
u8 tmp;
m = n = p = 0;
delta = 0xffffffff;
if (mdev->type == G200_EW3) {
vcomax = 800000;
vcomin = 400000;
pllreffreq = 25000;
for (testp = 1; testp < 8; testp++) {
for (testp2 = 1; testp2 < 8; testp2++) {
if (testp < testp2)
continue;
if ((clock * testp * testp2) > vcomax)
continue;
if ((clock * testp * testp2) < vcomin)
continue;
for (testm = 1; testm < 26; testm++) {
for (testn = 32; testn < 2048 ; testn++) {
computed = (pllreffreq * testn) /
(testm * testp * testp2);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = ((testn & 0x100) >> 1) |
(testm);
n = (testn & 0xFF);
p = ((testn & 0x600) >> 3) |
(testp2 << 3) |
(testp);
}
}
}
}
}
} else {
vcomax = 550000;
vcomin = 150000;
pllreffreq = 48000;
for (testp = 1; testp < 9; testp++) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testm = 1; testm < 17; testm++) {
for (testn = 1; testn < 151; testn++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
m = (testm - 1) |
((n >> 1) & 0x80);
p = testp - 1;
}
}
}
}
}
for (i = 0; i <= 32 && pll_locked == false; i++) {
if (i > 0) {
WREG8(MGAREG_CRTC_INDEX, 0x1e);
tmp = RREG8(MGAREG_CRTC_DATA);
if (tmp < 0xff)
WREG8(MGAREG_CRTC_DATA, tmp+1);
}
/* set pixclkdis to 1 */
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_REMHEADCTL_CLKDIS;
WREG8(DAC_DATA, tmp);
/* select PLL Set C */
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= 0x3 << 2;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN | 0x80;
WREG8(DAC_DATA, tmp);
udelay(500);
/* reset the PLL */
WREG8(DAC_INDEX, MGA1064_VREF_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~0x04;
WREG8(DAC_DATA, tmp);
udelay(50);
/* program pixel pll register */
WREG_DAC(MGA1064_WB_PIX_PLLC_N, n);
WREG_DAC(MGA1064_WB_PIX_PLLC_M, m);
WREG_DAC(MGA1064_WB_PIX_PLLC_P, p);
udelay(50);
/* turn pll on */
WREG8(DAC_INDEX, MGA1064_VREF_CTL);
tmp = RREG8(DAC_DATA);
tmp |= 0x04;
WREG_DAC(MGA1064_VREF_CTL, tmp);
udelay(500);
/* select the pixel pll */
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK;
tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_REMHEADCTL_CLKSL_MSK;
tmp |= MGA1064_REMHEADCTL_CLKSL_PLL;
WREG8(DAC_DATA, tmp);
/* reset dotclock rate bit */
WREG8(MGAREG_SEQ_INDEX, 1);
tmp = RREG8(MGAREG_SEQ_DATA);
tmp &= ~0x8;
WREG8(MGAREG_SEQ_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
vcount = RREG8(MGAREG_VCOUNT);
for (j = 0; j < 30 && pll_locked == false; j++) {
tmpcount = RREG8(MGAREG_VCOUNT);
if (tmpcount < vcount)
vcount = 0;
if ((tmpcount - vcount) > 2)
pll_locked = true;
else
udelay(5);
}
}
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_REMHEADCTL_CLKDIS;
WREG_DAC(MGA1064_REMHEADCTL, tmp);
return 0;
}
static int mga_g200ev_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
unsigned int testp, testm, testn;
unsigned int p, m, n;
unsigned int computed;
u8 tmp;
m = n = p = 0;
vcomax = 550000;
vcomin = 150000;
pllreffreq = 50000;
delta = 0xffffffff;
for (testp = 16; testp > 0; testp--) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testn = 1; testn < 257; testn++) {
for (testm = 1; testm < 17; testm++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
m = testm - 1;
p = testp - 1;
}
}
}
}
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= 0x3 << 2;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT);
tmp = RREG8(DAC_DATA);
WREG8(DAC_DATA, tmp & ~0x40);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
WREG_DAC(MGA1064_EV_PIX_PLLC_M, m);
WREG_DAC(MGA1064_EV_PIX_PLLC_N, n);
WREG_DAC(MGA1064_EV_PIX_PLLC_P, p);
udelay(50);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
udelay(500);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK;
tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_PLL_STAT);
tmp = RREG8(DAC_DATA);
WREG8(DAC_DATA, tmp | 0x40);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= (0x3 << 2);
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
return 0;
}
static int mga_g200eh_set_plls(struct mga_device *mdev, long clock)
{
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
unsigned int testp, testm, testn;
unsigned int p, m, n;
unsigned int computed;
int i, j, tmpcount, vcount;
u8 tmp;
bool pll_locked = false;
m = n = p = 0;
if (mdev->type == G200_EH3) {
vcomax = 3000000;
vcomin = 1500000;
pllreffreq = 25000;
delta = 0xffffffff;
testp = 0;
for (testm = 150; testm >= 6; testm--) {
if (clock * testm > vcomax)
continue;
if (clock * testm < vcomin)
continue;
for (testn = 120; testn >= 60; testn--) {
computed = (pllreffreq * testn) / testm;
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn;
m = testm;
p = testp;
}
if (delta == 0)
break;
}
if (delta == 0)
break;
}
} else {
vcomax = 800000;
vcomin = 400000;
pllreffreq = 33333;
delta = 0xffffffff;
for (testp = 16; testp > 0; testp >>= 1) {
if (clock * testp > vcomax)
continue;
if (clock * testp < vcomin)
continue;
for (testm = 1; testm < 33; testm++) {
for (testn = 17; testn < 257; testn++) {
computed = (pllreffreq * testn) /
(testm * testp);
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
n = testn - 1;
m = (testm - 1);
p = testp - 1;
}
if ((clock * testp) >= 600000)
p |= 0x80;
}
}
}
}
for (i = 0; i <= 32 && pll_locked == false; i++) {
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= 0x3 << 2;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
udelay(500);
WREG_DAC(MGA1064_EH_PIX_PLLC_M, m);
WREG_DAC(MGA1064_EH_PIX_PLLC_N, n);
WREG_DAC(MGA1064_EH_PIX_PLLC_P, p);
udelay(500);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_SEL_MSK;
tmp |= MGA1064_PIX_CLK_CTL_SEL_PLL;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
vcount = RREG8(MGAREG_VCOUNT);
for (j = 0; j < 30 && pll_locked == false; j++) {
tmpcount = RREG8(MGAREG_VCOUNT);
if (tmpcount < vcount)
vcount = 0;
if ((tmpcount - vcount) > 2)
pll_locked = true;
else
udelay(5);
}
}
return 0;
}
static int mga_g200er_set_plls(struct mga_device *mdev, long clock)
{
static const unsigned int m_div_val[] = { 1, 2, 4, 8 };
unsigned int vcomax, vcomin, pllreffreq;
unsigned int delta, tmpdelta;
int testr, testn, testm, testo;
unsigned int p, m, n;
unsigned int computed, vco;
int tmp;
m = n = p = 0;
vcomax = 1488000;
vcomin = 1056000;
pllreffreq = 48000;
delta = 0xffffffff;
for (testr = 0; testr < 4; testr++) {
if (delta == 0)
break;
for (testn = 5; testn < 129; testn++) {
if (delta == 0)
break;
for (testm = 3; testm >= 0; testm--) {
if (delta == 0)
break;
for (testo = 5; testo < 33; testo++) {
vco = pllreffreq * (testn + 1) /
(testr + 1);
if (vco < vcomin)
continue;
if (vco > vcomax)
continue;
computed = vco / (m_div_val[testm] * (testo + 1));
if (computed > clock)
tmpdelta = computed - clock;
else
tmpdelta = clock - computed;
if (tmpdelta < delta) {
delta = tmpdelta;
m = testm | (testo << 3);
n = testn;
p = testr | (testr << 3);
}
}
}
}
}
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_PIX_CLK_CTL_CLK_DIS;
WREG8(DAC_DATA, tmp);
WREG8(DAC_INDEX, MGA1064_REMHEADCTL);
tmp = RREG8(DAC_DATA);
tmp |= MGA1064_REMHEADCTL_CLKDIS;
WREG8(DAC_DATA, tmp);
tmp = RREG8(MGAREG_MEM_MISC_READ);
tmp |= (0x3<<2) | 0xc0;
WREG8(MGAREG_MEM_MISC_WRITE, tmp);
WREG8(DAC_INDEX, MGA1064_PIX_CLK_CTL);
tmp = RREG8(DAC_DATA);
tmp &= ~MGA1064_PIX_CLK_CTL_CLK_DIS;
tmp |= MGA1064_PIX_CLK_CTL_CLK_POW_DOWN;
WREG8(DAC_DATA, tmp);
udelay(500);
WREG_DAC(MGA1064_ER_PIX_PLLC_N, n);
WREG_DAC(MGA1064_ER_PIX_PLLC_M, m);
WREG_DAC(MGA1064_ER_PIX_PLLC_P, p);
udelay(50);
return 0;
}
static int mgag200_crtc_set_plls(struct mga_device *mdev, long clock)
{
u8 misc;
switch(mdev->type) {
case G200_PCI:
case G200_AGP:
return mgag200_g200_set_plls(mdev, clock);
case G200_SE_A:
case G200_SE_B:
return mga_g200se_set_plls(mdev, clock);
case G200_WB:
case G200_EW3:
return mga_g200wb_set_plls(mdev, clock);
case G200_EV:
return mga_g200ev_set_plls(mdev, clock);
case G200_EH:
case G200_EH3:
return mga_g200eh_set_plls(mdev, clock);
case G200_ER:
return mga_g200er_set_plls(mdev, clock);
}
misc = RREG8(MGA_MISC_IN);
misc &= ~MGAREG_MISC_CLK_SEL_MASK;
misc |= MGAREG_MISC_CLK_SEL_MGA_MSK;
WREG8(MGA_MISC_OUT, misc);
return 0;
}
static void mgag200_g200wb_hold_bmc(struct mga_device *mdev)
{
u8 tmp;
int iter_max;
/* 1- The first step is to warn the BMC of an upcoming mode change.
* We are putting the misc<0> to output.*/
WREG8(DAC_INDEX, MGA1064_GEN_IO_CTL);
tmp = RREG8(DAC_DATA);
tmp |= 0x10;
WREG_DAC(MGA1064_GEN_IO_CTL, tmp);
/* we are putting a 1 on the misc<0> line */
WREG8(DAC_INDEX, MGA1064_GEN_IO_DATA);
tmp = RREG8(DAC_DATA);
tmp |= 0x10;
WREG_DAC(MGA1064_GEN_IO_DATA, tmp);
/* 2- Second step to mask and further scan request
* This will be done by asserting the remfreqmsk bit (XSPAREREG<7>)
*/
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
tmp |= 0x80;
WREG_DAC(MGA1064_SPAREREG, tmp);
/* 3a- the third step is to verifu if there is an active scan
* We are searching for a 0 on remhsyncsts <XSPAREREG<0>)
*/
iter_max = 300;
while (!(tmp & 0x1) && iter_max) {
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
udelay(1000);
iter_max--;
}
/* 3b- this step occurs only if the remove is actually scanning
* we are waiting for the end of the frame which is a 1 on
* remvsyncsts (XSPAREREG<1>)
*/
if (iter_max) {
iter_max = 300;
while ((tmp & 0x2) && iter_max) {
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
udelay(1000);
iter_max--;
}
}
}
static void mgag200_g200wb_release_bmc(struct mga_device *mdev)
{
u8 tmp;
/* 1- The first step is to ensure that the vrsten and hrsten are set */
WREG8(MGAREG_CRTCEXT_INDEX, 1);
tmp = RREG8(MGAREG_CRTCEXT_DATA);
WREG8(MGAREG_CRTCEXT_DATA, tmp | 0x88);
/* 2- second step is to assert the rstlvl2 */
WREG8(DAC_INDEX, MGA1064_REMHEADCTL2);
tmp = RREG8(DAC_DATA);
tmp |= 0x8;
WREG8(DAC_DATA, tmp);
/* wait 10 us */
udelay(10);
/* 3- deassert rstlvl2 */
tmp &= ~0x08;
WREG8(DAC_INDEX, MGA1064_REMHEADCTL2);
WREG8(DAC_DATA, tmp);
/* 4- remove mask of scan request */
WREG8(DAC_INDEX, MGA1064_SPAREREG);
tmp = RREG8(DAC_DATA);
tmp &= ~0x80;
WREG8(DAC_DATA, tmp);
/* 5- put back a 0 on the misc<0> line */
WREG8(DAC_INDEX, MGA1064_GEN_IO_DATA);
tmp = RREG8(DAC_DATA);
tmp &= ~0x10;
WREG_DAC(MGA1064_GEN_IO_DATA, tmp);
}
/*
* This is how the framebuffer base address is stored in g200 cards:
* * Assume @offset is the gpu_addr variable of the framebuffer object
* * Then addr is the number of _pixels_ (not bytes) from the start of
* VRAM to the first pixel we want to display. (divided by 2 for 32bit
* framebuffers)
* * addr is stored in the CRTCEXT0, CRTCC and CRTCD registers
* addr<20> -> CRTCEXT0<6>
* addr<19-16> -> CRTCEXT0<3-0>
* addr<15-8> -> CRTCC<7-0>
* addr<7-0> -> CRTCD<7-0>
*
* CRTCEXT0 has to be programmed last to trigger an update and make the
* new addr variable take effect.
*/
static void mgag200_set_startadd(struct mga_device *mdev,
unsigned long offset)
{
struct drm_device *dev = &mdev->base;
u32 startadd;
u8 crtcc, crtcd, crtcext0;
startadd = offset / 8;
/*
* Can't store addresses any higher than that, but we also
* don't have more than 16 MiB of memory, so it should be fine.
*/
drm_WARN_ON(dev, startadd > 0x1fffff);
RREG_ECRT(0x00, crtcext0);
crtcc = (startadd >> 8) & 0xff;
crtcd = startadd & 0xff;
crtcext0 &= 0xb0;
crtcext0 |= ((startadd >> 14) & BIT(6)) |
((startadd >> 16) & 0x0f);
WREG_CRT(0x0c, crtcc);
WREG_CRT(0x0d, crtcd);
WREG_ECRT(0x00, crtcext0);
}
static void mgag200_set_dac_regs(struct mga_device *mdev)
{
size_t i;
u8 dacvalue[] = {
/* 0x00: */ 0, 0, 0, 0, 0, 0, 0x00, 0,
/* 0x08: */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 0x10: */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 0x18: */ 0x00, 0, 0xC9, 0xFF, 0xBF, 0x20, 0x1F, 0x20,
/* 0x20: */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* 0x28: */ 0x00, 0x00, 0x00, 0x00, 0, 0, 0, 0x40,
/* 0x30: */ 0x00, 0xB0, 0x00, 0xC2, 0x34, 0x14, 0x02, 0x83,
/* 0x38: */ 0x00, 0x93, 0x00, 0x77, 0x00, 0x00, 0x00, 0x3A,
/* 0x40: */ 0, 0, 0, 0, 0, 0, 0, 0,
/* 0x48: */ 0, 0, 0, 0, 0, 0, 0, 0
};
switch (mdev->type) {
case G200_PCI:
case G200_AGP:
dacvalue[MGA1064_SYS_PLL_M] = 0x04;
dacvalue[MGA1064_SYS_PLL_N] = 0x2D;
dacvalue[MGA1064_SYS_PLL_P] = 0x19;
break;
case G200_SE_A:
case G200_SE_B:
dacvalue[MGA1064_VREF_CTL] = 0x03;
dacvalue[MGA1064_PIX_CLK_CTL] = MGA1064_PIX_CLK_CTL_SEL_PLL;
dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_DAC_EN |
MGA1064_MISC_CTL_VGA8 |
MGA1064_MISC_CTL_DAC_RAM_CS;
break;
case G200_WB:
case G200_EW3:
dacvalue[MGA1064_VREF_CTL] = 0x07;
break;
case G200_EV:
dacvalue[MGA1064_PIX_CLK_CTL] = MGA1064_PIX_CLK_CTL_SEL_PLL;
dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_VGA8 |
MGA1064_MISC_CTL_DAC_RAM_CS;
break;
case G200_EH:
case G200_EH3:
dacvalue[MGA1064_MISC_CTL] = MGA1064_MISC_CTL_VGA8 |
MGA1064_MISC_CTL_DAC_RAM_CS;
break;
case G200_ER:
break;
}
for (i = 0; i < ARRAY_SIZE(dacvalue); i++) {
if ((i <= 0x17) ||
(i == 0x1b) ||
(i == 0x1c) ||
((i >= 0x1f) && (i <= 0x29)) ||
((i >= 0x30) && (i <= 0x37)))
continue;
if (IS_G200_SE(mdev) &&
((i == 0x2c) || (i == 0x2d) || (i == 0x2e)))
continue;
if ((mdev->type == G200_EV ||
mdev->type == G200_WB ||
mdev->type == G200_EH ||
mdev->type == G200_EW3 ||
mdev->type == G200_EH3) &&
(i >= 0x44) && (i <= 0x4e))
continue;
WREG_DAC(i, dacvalue[i]);
}
if (mdev->type == G200_ER)
WREG_DAC(0x90, 0);
}
static void mgag200_init_regs(struct mga_device *mdev)
{
u8 crtc11, misc;
mgag200_set_dac_regs(mdev);
WREG_SEQ(2, 0x0f);
WREG_SEQ(3, 0x00);
WREG_SEQ(4, 0x0e);
WREG_CRT(10, 0);
WREG_CRT(11, 0);
WREG_CRT(12, 0);
WREG_CRT(13, 0);
WREG_CRT(14, 0);
WREG_CRT(15, 0);
RREG_CRT(0x11, crtc11);
crtc11 &= ~(MGAREG_CRTC11_CRTCPROTECT |
MGAREG_CRTC11_VINTEN |
MGAREG_CRTC11_VINTCLR);
WREG_CRT(0x11, crtc11);
if (mdev->type == G200_ER)
WREG_ECRT(0x24, 0x5);
if (mdev->type == G200_EW3)
WREG_ECRT(0x34, 0x5);
misc = RREG8(MGA_MISC_IN);
misc |= MGAREG_MISC_IOADSEL;
WREG8(MGA_MISC_OUT, misc);
}
static void mgag200_set_mode_regs(struct mga_device *mdev,
const struct drm_display_mode *mode)
{
unsigned int hdisplay, hsyncstart, hsyncend, htotal;
unsigned int vdisplay, vsyncstart, vsyncend, vtotal;
u8 misc, crtcext1, crtcext2, crtcext5;
hdisplay = mode->hdisplay / 8 - 1;
hsyncstart = mode->hsync_start / 8 - 1;
hsyncend = mode->hsync_end / 8 - 1;
htotal = mode->htotal / 8 - 1;
/* Work around hardware quirk */
if ((htotal & 0x07) == 0x06 || (htotal & 0x07) == 0x04)
htotal++;
vdisplay = mode->vdisplay - 1;
vsyncstart = mode->vsync_start - 1;
vsyncend = mode->vsync_end - 1;
vtotal = mode->vtotal - 2;
misc = RREG8(MGA_MISC_IN);
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
misc |= MGAREG_MISC_HSYNCPOL;
else
misc &= ~MGAREG_MISC_HSYNCPOL;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
misc |= MGAREG_MISC_VSYNCPOL;
else
misc &= ~MGAREG_MISC_VSYNCPOL;
crtcext1 = (((htotal - 4) & 0x100) >> 8) |
((hdisplay & 0x100) >> 7) |
((hsyncstart & 0x100) >> 6) |
(htotal & 0x40);
if (mdev->type == G200_WB || mdev->type == G200_EW3)
crtcext1 |= BIT(7) | /* vrsten */
BIT(3); /* hrsten */
crtcext2 = ((vtotal & 0xc00) >> 10) |
((vdisplay & 0x400) >> 8) |
((vdisplay & 0xc00) >> 7) |
((vsyncstart & 0xc00) >> 5) |
((vdisplay & 0x400) >> 3);
crtcext5 = 0x00;
WREG_CRT(0, htotal - 4);
WREG_CRT(1, hdisplay);
WREG_CRT(2, hdisplay);
WREG_CRT(3, (htotal & 0x1F) | 0x80);
WREG_CRT(4, hsyncstart);
WREG_CRT(5, ((htotal & 0x20) << 2) | (hsyncend & 0x1F));
WREG_CRT(6, vtotal & 0xFF);
WREG_CRT(7, ((vtotal & 0x100) >> 8) |
((vdisplay & 0x100) >> 7) |
((vsyncstart & 0x100) >> 6) |
((vdisplay & 0x100) >> 5) |
((vdisplay & 0x100) >> 4) | /* linecomp */
((vtotal & 0x200) >> 4) |
((vdisplay & 0x200) >> 3) |
((vsyncstart & 0x200) >> 2));
WREG_CRT(9, ((vdisplay & 0x200) >> 4) |
((vdisplay & 0x200) >> 3));
WREG_CRT(16, vsyncstart & 0xFF);
WREG_CRT(17, (vsyncend & 0x0F) | 0x20);
WREG_CRT(18, vdisplay & 0xFF);
WREG_CRT(20, 0);
WREG_CRT(21, vdisplay & 0xFF);
WREG_CRT(22, (vtotal + 1) & 0xFF);
WREG_CRT(23, 0xc3);
WREG_CRT(24, vdisplay & 0xFF);
WREG_ECRT(0x01, crtcext1);
WREG_ECRT(0x02, crtcext2);
WREG_ECRT(0x05, crtcext5);
WREG8(MGA_MISC_OUT, misc);
}
static u8 mgag200_get_bpp_shift(struct mga_device *mdev,
const struct drm_format_info *format)
{
return mdev->bpp_shifts[format->cpp[0] - 1];
}
/*
* Calculates the HW offset value from the framebuffer's pitch. The
* offset is a multiple of the pixel size and depends on the display
* format.
*/
static u32 mgag200_calculate_offset(struct mga_device *mdev,
const struct drm_framebuffer *fb)
{
u32 offset = fb->pitches[0] / fb->format->cpp[0];
u8 bppshift = mgag200_get_bpp_shift(mdev, fb->format);
if (fb->format->cpp[0] * 8 == 24)
offset = (offset * 3) >> (4 - bppshift);
else
offset = offset >> (4 - bppshift);
return offset;
}
static void mgag200_set_offset(struct mga_device *mdev,
const struct drm_framebuffer *fb)
{
u8 crtc13, crtcext0;
u32 offset = mgag200_calculate_offset(mdev, fb);
RREG_ECRT(0, crtcext0);
crtc13 = offset & 0xff;
crtcext0 &= ~MGAREG_CRTCEXT0_OFFSET_MASK;
crtcext0 |= (offset >> 4) & MGAREG_CRTCEXT0_OFFSET_MASK;
WREG_CRT(0x13, crtc13);
WREG_ECRT(0x00, crtcext0);
}
static void mgag200_set_format_regs(struct mga_device *mdev,
const struct drm_framebuffer *fb)
{
struct drm_device *dev = &mdev->base;
const struct drm_format_info *format = fb->format;
unsigned int bpp, bppshift, scale;
u8 crtcext3, xmulctrl;
bpp = format->cpp[0] * 8;
bppshift = mgag200_get_bpp_shift(mdev, format);
switch (bpp) {
case 24:
scale = ((1 << bppshift) * 3) - 1;
break;
default:
scale = (1 << bppshift) - 1;
break;
}
RREG_ECRT(3, crtcext3);
switch (bpp) {
case 8:
xmulctrl = MGA1064_MUL_CTL_8bits;
break;
case 16:
if (format->depth == 15)
xmulctrl = MGA1064_MUL_CTL_15bits;
else
xmulctrl = MGA1064_MUL_CTL_16bits;
break;
case 24:
xmulctrl = MGA1064_MUL_CTL_24bits;
break;
case 32:
xmulctrl = MGA1064_MUL_CTL_32_24bits;
break;
default:
/* BUG: We should have caught this problem already. */
drm_WARN_ON(dev, "invalid format depth\n");
return;
}
crtcext3 &= ~GENMASK(2, 0);
crtcext3 |= scale;
WREG_DAC(MGA1064_MUL_CTL, xmulctrl);
WREG_GFX(0, 0x00);
WREG_GFX(1, 0x00);
WREG_GFX(2, 0x00);
WREG_GFX(3, 0x00);
WREG_GFX(4, 0x00);
WREG_GFX(5, 0x40);
WREG_GFX(6, 0x05);
WREG_GFX(7, 0x0f);
WREG_GFX(8, 0x0f);
WREG_ECRT(3, crtcext3);
}
static void mgag200_g200er_reset_tagfifo(struct mga_device *mdev)
{
static uint32_t RESET_FLAG = 0x00200000; /* undocumented magic value */
u32 memctl;
memctl = RREG32(MGAREG_MEMCTL);
memctl |= RESET_FLAG;
WREG32(MGAREG_MEMCTL, memctl);
udelay(1000);
memctl &= ~RESET_FLAG;
WREG32(MGAREG_MEMCTL, memctl);
}
static void mgag200_g200se_set_hiprilvl(struct mga_device *mdev,
const struct drm_display_mode *mode,
const struct drm_framebuffer *fb)
{
u32 unique_rev_id = mdev->model.g200se.unique_rev_id;
unsigned int hiprilvl;
u8 crtcext6;
if (unique_rev_id >= 0x04) {
hiprilvl = 0;
} else if (unique_rev_id >= 0x02) {
unsigned int bpp;
unsigned long mb;
if (fb->format->cpp[0] * 8 > 16)
bpp = 32;
else if (fb->format->cpp[0] * 8 > 8)
bpp = 16;
else
bpp = 8;
mb = (mode->clock * bpp) / 1000;
if (mb > 3100)
hiprilvl = 0;
else if (mb > 2600)
hiprilvl = 1;
else if (mb > 1900)
hiprilvl = 2;
else if (mb > 1160)
hiprilvl = 3;
else if (mb > 440)
hiprilvl = 4;
else
hiprilvl = 5;
} else if (unique_rev_id >= 0x01) {
hiprilvl = 3;
} else {
hiprilvl = 4;
}
crtcext6 = hiprilvl; /* implicitly sets maxhipri to 0 */
WREG_ECRT(0x06, crtcext6);
}
static void mgag200_g200ev_set_hiprilvl(struct mga_device *mdev)
{
WREG_ECRT(0x06, 0x00);
}
static void mgag200_enable_display(struct mga_device *mdev)
{
u8 seq0, seq1, crtcext1;
RREG_SEQ(0x00, seq0);
seq0 |= MGAREG_SEQ0_SYNCRST |
MGAREG_SEQ0_ASYNCRST;
WREG_SEQ(0x00, seq0);
/*
* TODO: replace busy waiting with vblank IRQ; put
* msleep(50) before changing SCROFF
*/
mga_wait_vsync(mdev);
mga_wait_busy(mdev);
RREG_SEQ(0x01, seq1);
seq1 &= ~MGAREG_SEQ1_SCROFF;
WREG_SEQ(0x01, seq1);
msleep(20);
RREG_ECRT(0x01, crtcext1);
crtcext1 &= ~MGAREG_CRTCEXT1_VSYNCOFF;
crtcext1 &= ~MGAREG_CRTCEXT1_HSYNCOFF;
WREG_ECRT(0x01, crtcext1);
}
static void mgag200_disable_display(struct mga_device *mdev)
{
u8 seq0, seq1, crtcext1;
RREG_SEQ(0x00, seq0);
seq0 &= ~MGAREG_SEQ0_SYNCRST;
WREG_SEQ(0x00, seq0);
/*
* TODO: replace busy waiting with vblank IRQ; put
* msleep(50) before changing SCROFF
*/
mga_wait_vsync(mdev);
mga_wait_busy(mdev);
RREG_SEQ(0x01, seq1);
seq1 |= MGAREG_SEQ1_SCROFF;
WREG_SEQ(0x01, seq1);
msleep(20);
RREG_ECRT(0x01, crtcext1);
crtcext1 |= MGAREG_CRTCEXT1_VSYNCOFF |
MGAREG_CRTCEXT1_HSYNCOFF;
WREG_ECRT(0x01, crtcext1);
}
/*
* Connector
*/
static int mga_vga_get_modes(struct drm_connector *connector)
{
struct mga_connector *mga_connector = to_mga_connector(connector);
struct edid *edid;
int ret = 0;
edid = drm_get_edid(connector, &mga_connector->i2c->adapter);
if (edid) {
drm_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
}
return ret;
}
static uint32_t mga_vga_calculate_mode_bandwidth(struct drm_display_mode *mode,
int bits_per_pixel)
{
uint32_t total_area, divisor;
uint64_t active_area, pixels_per_second, bandwidth;
uint64_t bytes_per_pixel = (bits_per_pixel + 7) / 8;
divisor = 1024;
if (!mode->htotal || !mode->vtotal || !mode->clock)
return 0;
active_area = mode->hdisplay * mode->vdisplay;
total_area = mode->htotal * mode->vtotal;
pixels_per_second = active_area * mode->clock * 1000;
do_div(pixels_per_second, total_area);
bandwidth = pixels_per_second * bytes_per_pixel * 100;
do_div(bandwidth, divisor);
return (uint32_t)(bandwidth);
}
#define MODE_BANDWIDTH MODE_BAD
static enum drm_mode_status mga_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct drm_device *dev = connector->dev;
struct mga_device *mdev = to_mga_device(dev);
int bpp = 32;
if (IS_G200_SE(mdev)) {
u32 unique_rev_id = mdev->model.g200se.unique_rev_id;
if (unique_rev_id == 0x01) {
if (mode->hdisplay > 1600)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 1200)
return MODE_VIRTUAL_Y;
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (24400 * 1024))
return MODE_BANDWIDTH;
} else if (unique_rev_id == 0x02) {
if (mode->hdisplay > 1920)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 1200)
return MODE_VIRTUAL_Y;
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (30100 * 1024))
return MODE_BANDWIDTH;
} else {
if (mga_vga_calculate_mode_bandwidth(mode, bpp)
> (55000 * 1024))
return MODE_BANDWIDTH;
}
} else if (mdev->type == G200_WB) {
if (mode->hdisplay > 1280)
return MODE_VIRTUAL_X;
if (mode->vdisplay > 1024)
return MODE_VIRTUAL_Y;
if (mga_vga_calculate_mode_bandwidth(mode, bpp) >
(31877 * 1024))
return MODE_BANDWIDTH;
} else if (mdev->type == G200_EV &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (32700 * 1024))) {
return MODE_BANDWIDTH;
} else if (mdev->type == G200_EH &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (37500 * 1024))) {
return MODE_BANDWIDTH;
} else if (mdev->type == G200_ER &&
(mga_vga_calculate_mode_bandwidth(mode,
bpp) > (55000 * 1024))) {
return MODE_BANDWIDTH;
}
if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 ||
(mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) {
return MODE_H_ILLEGAL;
}
if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 ||
mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 ||
mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 ||
mode->crtc_vsync_end > 4096 || mode->crtc_vtotal > 4096) {
return MODE_BAD;
}
/* Validate the mode input by the user */
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 16:08:32 +08:00
if (connector->cmdline_mode.specified) {
if (connector->cmdline_mode.bpp_specified)
bpp = connector->cmdline_mode.bpp;
}
if ((mode->hdisplay * mode->vdisplay * (bpp/8)) > mdev->vram_fb_available) {
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 16:08:32 +08:00
if (connector->cmdline_mode.specified)
connector->cmdline_mode.specified = false;
return MODE_BAD;
}
return MODE_OK;
}
static void mga_connector_destroy(struct drm_connector *connector)
{
struct mga_connector *mga_connector = to_mga_connector(connector);
mgag200_i2c_destroy(mga_connector->i2c);
drm_connector_cleanup(connector);
}
static const struct drm_connector_helper_funcs mga_vga_connector_helper_funcs = {
.get_modes = mga_vga_get_modes,
.mode_valid = mga_vga_mode_valid,
};
static const struct drm_connector_funcs mga_vga_connector_funcs = {
.reset = drm_atomic_helper_connector_reset,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = mga_connector_destroy,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static int mgag200_vga_connector_init(struct mga_device *mdev)
{
struct drm_device *dev = &mdev->base;
struct mga_connector *mconnector = &mdev->connector;
struct drm_connector *connector = &mconnector->base;
struct mga_i2c_chan *i2c;
int ret;
i2c = mgag200_i2c_create(dev);
if (!i2c)
drm_warn(dev, "failed to add DDC bus\n");
ret = drm_connector_init_with_ddc(dev, connector,
&mga_vga_connector_funcs,
DRM_MODE_CONNECTOR_VGA,
&i2c->adapter);
if (ret)
goto err_mgag200_i2c_destroy;
drm_connector_helper_add(connector, &mga_vga_connector_helper_funcs);
mconnector->i2c = i2c;
return 0;
err_mgag200_i2c_destroy:
mgag200_i2c_destroy(i2c);
return ret;
}
/*
* Simple Display Pipe
*/
static enum drm_mode_status
mgag200_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
const struct drm_display_mode *mode)
{
return MODE_OK;
}
static void
mgag200_handle_damage(struct mga_device *mdev, struct drm_framebuffer *fb,
struct drm_rect *clip, const struct dma_buf_map *map)
{
void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
drm_fb_memcpy_dstclip(mdev->vram, fb->pitches[0], vmap, fb, clip);
/* Always scanout image at VRAM offset 0 */
mgag200_set_startadd(mdev, (u32)0);
mgag200_set_offset(mdev, fb);
}
static void
mgag200_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct drm_crtc *crtc = &pipe->crtc;
struct drm_device *dev = crtc->dev;
struct mga_device *mdev = to_mga_device(dev);
struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
struct drm_framebuffer *fb = plane_state->fb;
struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
struct drm_rect fullscreen = {
.x1 = 0,
.x2 = fb->width,
.y1 = 0,
.y2 = fb->height,
};
if (mdev->type == G200_WB || mdev->type == G200_EW3)
mgag200_g200wb_hold_bmc(mdev);
mgag200_set_format_regs(mdev, fb);
mgag200_set_mode_regs(mdev, adjusted_mode);
mgag200_crtc_set_plls(mdev, adjusted_mode->clock);
if (mdev->type == G200_ER)
mgag200_g200er_reset_tagfifo(mdev);
if (IS_G200_SE(mdev))
mgag200_g200se_set_hiprilvl(mdev, adjusted_mode, fb);
else if (mdev->type == G200_EV)
mgag200_g200ev_set_hiprilvl(mdev);
if (mdev->type == G200_WB || mdev->type == G200_EW3)
mgag200_g200wb_release_bmc(mdev);
mga_crtc_load_lut(crtc);
mgag200_enable_display(mdev);
mgag200_handle_damage(mdev, fb, &fullscreen, &shadow_plane_state->map[0]);
}
static void
mgag200_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct drm_crtc *crtc = &pipe->crtc;
struct mga_device *mdev = to_mga_device(crtc->dev);
mgag200_disable_display(mdev);
}
static int
mgag200_simple_display_pipe_check(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *plane_state,
struct drm_crtc_state *crtc_state)
{
struct drm_plane *plane = plane_state->plane;
struct drm_framebuffer *new_fb = plane_state->fb;
struct drm_framebuffer *fb = NULL;
if (!new_fb)
return 0;
if (plane->state)
fb = plane->state->fb;
if (!fb || (fb->format != new_fb->format))
crtc_state->mode_changed = true; /* update PLL settings */
return 0;
}
static void
mgag200_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *old_state)
{
struct drm_plane *plane = &pipe->plane;
struct drm_device *dev = plane->dev;
struct mga_device *mdev = to_mga_device(dev);
struct drm_plane_state *state = plane->state;
struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
struct drm_framebuffer *fb = state->fb;
struct drm_rect damage;
if (!fb)
return;
if (drm_atomic_helper_damage_merged(old_state, state, &damage))
mgag200_handle_damage(mdev, fb, &damage, &shadow_plane_state->map[0]);
}
static const struct drm_simple_display_pipe_funcs
mgag200_simple_display_pipe_funcs = {
.mode_valid = mgag200_simple_display_pipe_mode_valid,
.enable = mgag200_simple_display_pipe_enable,
.disable = mgag200_simple_display_pipe_disable,
.check = mgag200_simple_display_pipe_check,
.update = mgag200_simple_display_pipe_update,
DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS,
};
static const uint32_t mgag200_simple_display_pipe_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_RGB565,
DRM_FORMAT_RGB888,
};
static const uint64_t mgag200_simple_display_pipe_fmtmods[] = {
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID
};
/*
* Mode config
*/
static const struct drm_mode_config_funcs mgag200_mode_config_funcs = {
.fb_create = drm_gem_fb_create_with_dirty,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
static unsigned int mgag200_preferred_depth(struct mga_device *mdev)
{
if (IS_G200_SE(mdev) && mdev->vram_fb_available < (2048*1024))
return 16;
else
return 32;
}
int mgag200_modeset_init(struct mga_device *mdev)
{
struct drm_device *dev = &mdev->base;
struct drm_connector *connector = &mdev->connector.base;
struct drm_simple_display_pipe *pipe = &mdev->display_pipe;
size_t format_count = ARRAY_SIZE(mgag200_simple_display_pipe_formats);
int ret;
mdev->bpp_shifts[0] = 0;
mdev->bpp_shifts[1] = 1;
mdev->bpp_shifts[2] = 0;
mdev->bpp_shifts[3] = 2;
mgag200_init_regs(mdev);
ret = drmm_mode_config_init(dev);
if (ret) {
drm_err(dev, "drmm_mode_config_init() failed, error %d\n",
ret);
return ret;
}
dev->mode_config.max_width = MGAG200_MAX_FB_WIDTH;
dev->mode_config.max_height = MGAG200_MAX_FB_HEIGHT;
dev->mode_config.preferred_depth = mgag200_preferred_depth(mdev);
dev->mode_config.fb_base = mdev->mc.vram_base;
dev->mode_config.funcs = &mgag200_mode_config_funcs;
ret = mgag200_vga_connector_init(mdev);
if (ret) {
drm_err(dev,
"mgag200_vga_connector_init() failed, error %d\n",
ret);
return ret;
}
ret = drm_simple_display_pipe_init(dev, pipe,
&mgag200_simple_display_pipe_funcs,
mgag200_simple_display_pipe_formats,
format_count,
mgag200_simple_display_pipe_fmtmods,
connector);
if (ret) {
drm_err(dev,
"drm_simple_display_pipe_init() failed, error %d\n",
ret);
return ret;
}
/* FIXME: legacy gamma tables; convert to CRTC state */
drm_mode_crtc_set_gamma_size(&pipe->crtc, MGAG200_LUT_SIZE);
drm_mode_config_reset(dev);
return 0;
}