korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-25 20:14:25 +08:00
Code Issues Packages Projects Releases Wiki Activity
2eae613b95
linux/arch/arm/boot/dts/exynos4210.dtsi

307 lines
6.9 KiB
Plaintext
Raw Normal View History

ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN Add initial dts file for EXYNOS4210 SoC. This dts file describes the SoC specific devices and properties. Along with this, add dts file for Samsung's SMDKV310 board and Insignal's ORIGEN board which uses the EXYNOS4210 dts file and extends it to describe the board specific properties. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-02 18:31:15 +08:00
/*
* Samsung's Exynos4210 SoC device tree source
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2010-2011 Linaro Ltd.
* www.linaro.org
*
* Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
* based board files can include this file and provide values for board specfic
* bindings.
*
* Note: This file does not include device nodes for all the controllers in
* Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
* nodes can be added to this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi Most definitions from exynos4210.dtsi can be applied for other SoCs from EXYNOS4 line as well, so move the common part into separate file that can be included by dtsi files of other EXYNOS4 SoCs (as well as current exynos4210.dtsi). Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Thomas Abraham <thomas.abraham@linaro.org> [kgene.kim@samsung.com: Dongjin Kim <dongjin.kim@agreeyamobility.net> submitted a similar patch 'Add DTS files derived from common EXYNOS4' before this but I picked this up because of included exynos4x12 stuff] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-21 09:12:59 +08:00
/include/ "exynos4.dtsi"
ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC Add pinctrl driver nodes for the three instances of pin controllers in SAMSUNG EXYNOS4210 SoC and add the pin group nodes available in the each of those three instances. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-07 05:14:26 +08:00
/include/ "exynos4210-pinctrl.dtsi"
ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN Add initial dts file for EXYNOS4210 SoC. This dts file describes the SoC specific devices and properties. Along with this, add dts file for Samsung's SMDKV310 board and Insignal's ORIGEN board which uses the EXYNOS4210 dts file and extends it to describe the board specific properties. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-02 18:31:15 +08:00
/ {
compatible = "samsung,exynos4210";
ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms Add device nodes for the three instances of spi controllers in EXYNOS4 platforms. Enable instance SPI 2 for SMDKV310 board and disable all spi instances for Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14 09:45:32 +08:00
aliases {
ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC Add pinctrl driver nodes for the three instances of pin controllers in SAMSUNG EXYNOS4210 SoC and add the pin group nodes available in the each of those three instances. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-07 05:14:26 +08:00
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
ARM: dts: Add nodes for spi controllers for SAMSUNG EXYNOS4 platforms Add device nodes for the three instances of spi controllers in EXYNOS4 platforms. Enable instance SPI 2 for SMDKV310 board and disable all spi instances for Origen board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-14 09:45:32 +08:00
};
ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN Add initial dts file for EXYNOS4210 SoC. This dts file describes the SoC specific devices and properties. Along with this, add dts file for Samsung's SMDKV310 board and Insignal's ORIGEN board which uses the EXYNOS4210 dts file and extends it to describe the board specific properties. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-02 18:31:15 +08:00
gic:interrupt-controller@10490000 {
ARM: EXYNOS: Add cpu-offset property in gic device tree node Commit db0d4db22a78 ('ARM: gic: allow GIC to support non-banked setups) requires a cpu-offset property to be specified for non-banked gic controllers, which is the case for Exynos4. Reported-and-Tested-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-02-08 10:42:43 +08:00
cpu-offset = <0x8000>;
ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN Add initial dts file for EXYNOS4210 SoC. This dts file describes the SoC specific devices and properties. Along with this, add dts file for Samsung's SMDKV310 board and Insignal's ORIGEN board which uses the EXYNOS4210 dts file and extends it to describe the board specific properties. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-02 18:31:15 +08:00
};
ARM: EXYNOS: Add device tree node for EXYNOS4 interrupt combiner controller Add node for EXYNOS4 interrupt combiner controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-07-13 14:25:08 +08:00
combiner:interrupt-controller@10440000 {
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC Add pinctrl driver nodes for the three instances of pin controllers in SAMSUNG EXYNOS4210 SoC and add the pin group nodes available in the each of those three instances. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-07 05:14:26 +08:00
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11400000 0x1000>;
interrupts = <0 47 0>;
interrupt-controller;
#interrupt-cells = <2>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x11000000 0x1000>;
interrupts = <0 46 0>;
interrupt-controller;
#interrupt-cells = <2>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
Merge branch 'next/dt-samsung' into next/dt-samsung-new Conflicts: arch/arm/boot/dts/exynos4210-origen.dts arch/arm/boot/dts/exynos4210.dtsi
2012-09-22 11:17:37 +08:00
<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>,
<0 32 0>;
ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC Add pinctrl driver nodes for the three instances of pin controllers in SAMSUNG EXYNOS4210 SoC and add the pin group nodes available in the each of those three instances. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-09-07 05:14:26 +08:00
};
};
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,pinctrl-exynos4210";
reg = <0x03860000 0x1000>;
};
ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN Add initial dts file for EXYNOS4210 SoC. This dts file describes the SoC specific devices and properties. Along with this, add dts file for Samsung's SMDKV310 board and Insignal's ORIGEN board which uses the EXYNOS4210 dts file and extends it to describe the board specific properties. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-11-02 18:31:15 +08:00
gpio-controllers {
#address-cells = <1>;
#size-cells = <1>;
gpio-controller;
ranges;
gpa0: gpio-controller@11400000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400000 0x20>;
#gpio-cells = <4>;
};
gpa1: gpio-controller@11400020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400020 0x20>;
#gpio-cells = <4>;
};
gpb: gpio-controller@11400040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400040 0x20>;
#gpio-cells = <4>;
};
gpc0: gpio-controller@11400060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400060 0x20>;
#gpio-cells = <4>;
};
gpc1: gpio-controller@11400080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400080 0x20>;
#gpio-cells = <4>;
};
gpd0: gpio-controller@114000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000A0 0x20>;
#gpio-cells = <4>;
};
gpd1: gpio-controller@114000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000C0 0x20>;
#gpio-cells = <4>;
};
gpe0: gpio-controller@114000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114000E0 0x20>;
#gpio-cells = <4>;
};
gpe1: gpio-controller@11400100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400100 0x20>;
#gpio-cells = <4>;
};
gpe2: gpio-controller@11400120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400120 0x20>;
#gpio-cells = <4>;
};
gpe3: gpio-controller@11400140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400140 0x20>;
#gpio-cells = <4>;
};
gpe4: gpio-controller@11400160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400160 0x20>;
#gpio-cells = <4>;
};
gpf0: gpio-controller@11400180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11400180 0x20>;
#gpio-cells = <4>;
};
gpf1: gpio-controller@114001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001A0 0x20>;
#gpio-cells = <4>;
};
gpf2: gpio-controller@114001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001C0 0x20>;
#gpio-cells = <4>;
};
gpf3: gpio-controller@114001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x114001E0 0x20>;
#gpio-cells = <4>;
};
gpj0: gpio-controller@11000000 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000000 0x20>;
#gpio-cells = <4>;
};
gpj1: gpio-controller@11000020 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000020 0x20>;
#gpio-cells = <4>;
};
gpk0: gpio-controller@11000040 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000040 0x20>;
#gpio-cells = <4>;
};
gpk1: gpio-controller@11000060 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000060 0x20>;
#gpio-cells = <4>;
};
gpk2: gpio-controller@11000080 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000080 0x20>;
#gpio-cells = <4>;
};
gpk3: gpio-controller@110000A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000A0 0x20>;
#gpio-cells = <4>;
};
gpl0: gpio-controller@110000C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000C0 0x20>;
#gpio-cells = <4>;
};
gpl1: gpio-controller@110000E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110000E0 0x20>;
#gpio-cells = <4>;
};
gpl2: gpio-controller@11000100 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000100 0x20>;
#gpio-cells = <4>;
};
gpy0: gpio-controller@11000120 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000120 0x20>;
#gpio-cells = <4>;
};
gpy1: gpio-controller@11000140 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000140 0x20>;
#gpio-cells = <4>;
};
gpy2: gpio-controller@11000160 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000160 0x20>;
#gpio-cells = <4>;
};
gpy3: gpio-controller@11000180 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000180 0x20>;
#gpio-cells = <4>;
};
gpy4: gpio-controller@110001A0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001A0 0x20>;
#gpio-cells = <4>;
};
gpy5: gpio-controller@110001C0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001C0 0x20>;
#gpio-cells = <4>;
};
gpy6: gpio-controller@110001E0 {
compatible = "samsung,exynos4-gpio";
reg = <0x110001E0 0x20>;
#gpio-cells = <4>;
};
gpx0: gpio-controller@11000C00 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C00 0x20>;
#gpio-cells = <4>;
};
gpx1: gpio-controller@11000C20 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C20 0x20>;
#gpio-cells = <4>;
};
gpx2: gpio-controller@11000C40 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C40 0x20>;
#gpio-cells = <4>;
};
gpx3: gpio-controller@11000C60 {
compatible = "samsung,exynos4-gpio";
reg = <0x11000C60 0x20>;
#gpio-cells = <4>;
};
gpz: gpio-controller@03860000 {
compatible = "samsung,exynos4-gpio";
reg = <0x03860000 0x20>;
#gpio-cells = <4>;
};
};
};
Reference in New Issue Copy Permalink