linux/tools/objtool/weak.c

27 lines
558 B
C
Raw Normal View History

objtool: Enable compilation of objtool for all architectures Objtool currently only compiles for x86 architectures. This is fine as it presently does not support tooling for other architectures. However, we would like to be able to convert other kernel tools to run as objtool sub commands because they too process ELF object files. This will allow us to convert tools such as recordmcount to use objtool's ELF code. Since much of recordmcount's ELF code is copy-paste code to/from a variety of other kernel tools (look at modpost for example) this means that if we can convert recordmcount we can convert more. We define weak definitions for subcommand entry functions and other weak definitions for shared functions critical to building existing subcommands. These return 127 when the command is missing which signify tools that do not exist on all architectures. In this case the "check" and "orc" tools do not exist on all architectures so we only add them for x86. Future changes adding support for "check", to arm64 for example, can then modify the SUBCMD_CHECK variable when building for arm64. Objtool is not currently wired in to KConfig to be built for other architectures because it's not needed for those architectures and there are no commands it supports other than those for x86. As more command support is enabled on various architectures the necessary KConfig changes can be made (e.g. adding "STACK_VALIDATION") to trigger building objtool. [ jpoimboe: remove aliases, add __weak macro, add error messages ] Cc: Julien Thierry <jthierry@redhat.com> Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-20 04:55:33 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2020 Matt Helsley <mhelsley@vmware.com>
* Weak definitions necessary to compile objtool without
* some subcommands (e.g. check, orc).
*/
#include <stdbool.h>
#include <errno.h>
objtool: Rework header include paths Currently objtool headers are being included either by their base name or included via ../ from a parent directory. In case of a base name usage: #include "warn.h" #include "arch_elf.h" it does not make it apparent from which directory the file comes from. To make it slightly better, and actually to avoid name clashes some arch specific files have "arch_" suffix. And files from an arch folder have to revert to including via ../ e.g: #include "../../elf.h" With additional architectures support and the code base growth there is a need for clearer headers naming scheme for multiple reasons: 1. to make it instantly obvious where these files come from (objtool itself / objtool arch|generic folders / some other external files), 2. to avoid name clashes of objtool arch specific headers, potential obtool arch generic headers and the system header files (there is /usr/include/elf.h already), 3. to avoid ../ includes and improve code readability. 4. to give a warm fuzzy feeling to developers who are mostly kernel developers and are accustomed to linux kernel headers arranging scheme. Doesn't this make it instantly obvious where are these files come from? #include <objtool/warn.h> #include <arch/elf.h> And doesn't it look nicer to avoid ugly ../ includes? Which also guarantees this is elf.h from the objtool and not /usr/include/elf.h. #include <objtool/elf.h> This patch defines and implements new objtool headers arranging scheme. Which is: - all generic headers go to include/objtool (similar to include/linux) - all arch headers go to arch/$(SRCARCH)/include/arch (to get arch prefix). This is similar to linux arch specific "asm/*" headers but we are not abusing "asm" name and calling it what it is. This also helps to prevent name clashes (arch is not used in system headers or kernel exports). To bring objtool to this state the following things are done: 1. current top level tools/objtool/ headers are moved into include/objtool/ subdirectory, 2. arch specific headers, currently only arch/x86/include/ are moved into arch/x86/include/arch/ and were stripped of "arch_" suffix, 3. new -I$(srctree)/tools/objtool/include include path to make includes like <objtool/warn.h> possible, 4. rewriting file includes, 5. make git not to ignore include/objtool/ subdirectory. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-11-13 07:03:32 +08:00
#include <objtool/objtool.h>
objtool: Enable compilation of objtool for all architectures Objtool currently only compiles for x86 architectures. This is fine as it presently does not support tooling for other architectures. However, we would like to be able to convert other kernel tools to run as objtool sub commands because they too process ELF object files. This will allow us to convert tools such as recordmcount to use objtool's ELF code. Since much of recordmcount's ELF code is copy-paste code to/from a variety of other kernel tools (look at modpost for example) this means that if we can convert recordmcount we can convert more. We define weak definitions for subcommand entry functions and other weak definitions for shared functions critical to building existing subcommands. These return 127 when the command is missing which signify tools that do not exist on all architectures. In this case the "check" and "orc" tools do not exist on all architectures so we only add them for x86. Future changes adding support for "check", to arm64 for example, can then modify the SUBCMD_CHECK variable when building for arm64. Objtool is not currently wired in to KConfig to be built for other architectures because it's not needed for those architectures and there are no commands it supports other than those for x86. As more command support is enabled on various architectures the necessary KConfig changes can be made (e.g. adding "STACK_VALIDATION") to trigger building objtool. [ jpoimboe: remove aliases, add __weak macro, add error messages ] Cc: Julien Thierry <jthierry@redhat.com> Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-20 04:55:33 +08:00
#define UNSUPPORTED(name) \
({ \
fprintf(stderr, "error: objtool: " name " not implemented\n"); \
return ENOSYS; \
})
int __weak orc_dump(const char *_objname)
{
UNSUPPORTED("ORC");
objtool: Enable compilation of objtool for all architectures Objtool currently only compiles for x86 architectures. This is fine as it presently does not support tooling for other architectures. However, we would like to be able to convert other kernel tools to run as objtool sub commands because they too process ELF object files. This will allow us to convert tools such as recordmcount to use objtool's ELF code. Since much of recordmcount's ELF code is copy-paste code to/from a variety of other kernel tools (look at modpost for example) this means that if we can convert recordmcount we can convert more. We define weak definitions for subcommand entry functions and other weak definitions for shared functions critical to building existing subcommands. These return 127 when the command is missing which signify tools that do not exist on all architectures. In this case the "check" and "orc" tools do not exist on all architectures so we only add them for x86. Future changes adding support for "check", to arm64 for example, can then modify the SUBCMD_CHECK variable when building for arm64. Objtool is not currently wired in to KConfig to be built for other architectures because it's not needed for those architectures and there are no commands it supports other than those for x86. As more command support is enabled on various architectures the necessary KConfig changes can be made (e.g. adding "STACK_VALIDATION") to trigger building objtool. [ jpoimboe: remove aliases, add __weak macro, add error messages ] Cc: Julien Thierry <jthierry@redhat.com> Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-20 04:55:33 +08:00
}
int __weak orc_create(struct objtool_file *file)
objtool: Enable compilation of objtool for all architectures Objtool currently only compiles for x86 architectures. This is fine as it presently does not support tooling for other architectures. However, we would like to be able to convert other kernel tools to run as objtool sub commands because they too process ELF object files. This will allow us to convert tools such as recordmcount to use objtool's ELF code. Since much of recordmcount's ELF code is copy-paste code to/from a variety of other kernel tools (look at modpost for example) this means that if we can convert recordmcount we can convert more. We define weak definitions for subcommand entry functions and other weak definitions for shared functions critical to building existing subcommands. These return 127 when the command is missing which signify tools that do not exist on all architectures. In this case the "check" and "orc" tools do not exist on all architectures so we only add them for x86. Future changes adding support for "check", to arm64 for example, can then modify the SUBCMD_CHECK variable when building for arm64. Objtool is not currently wired in to KConfig to be built for other architectures because it's not needed for those architectures and there are no commands it supports other than those for x86. As more command support is enabled on various architectures the necessary KConfig changes can be made (e.g. adding "STACK_VALIDATION") to trigger building objtool. [ jpoimboe: remove aliases, add __weak macro, add error messages ] Cc: Julien Thierry <jthierry@redhat.com> Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-20 04:55:33 +08:00
{
UNSUPPORTED("ORC");
objtool: Enable compilation of objtool for all architectures Objtool currently only compiles for x86 architectures. This is fine as it presently does not support tooling for other architectures. However, we would like to be able to convert other kernel tools to run as objtool sub commands because they too process ELF object files. This will allow us to convert tools such as recordmcount to use objtool's ELF code. Since much of recordmcount's ELF code is copy-paste code to/from a variety of other kernel tools (look at modpost for example) this means that if we can convert recordmcount we can convert more. We define weak definitions for subcommand entry functions and other weak definitions for shared functions critical to building existing subcommands. These return 127 when the command is missing which signify tools that do not exist on all architectures. In this case the "check" and "orc" tools do not exist on all architectures so we only add them for x86. Future changes adding support for "check", to arm64 for example, can then modify the SUBCMD_CHECK variable when building for arm64. Objtool is not currently wired in to KConfig to be built for other architectures because it's not needed for those architectures and there are no commands it supports other than those for x86. As more command support is enabled on various architectures the necessary KConfig changes can be made (e.g. adding "STACK_VALIDATION") to trigger building objtool. [ jpoimboe: remove aliases, add __weak macro, add error messages ] Cc: Julien Thierry <jthierry@redhat.com> Signed-off-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
2020-05-20 04:55:33 +08:00
}