linux/tools/perf/util/sort.c

2544 lines
58 KiB
C
Raw Normal View History

perf tools: Add dcacheline sort In perf's 'mem-mode', one can get access to a whole bunch of details specific to a particular sample instruction. A bunch of those details relate to the data address. One interesting thing you can do with data addresses is to convert them into a unique cacheline they belong too. Organizing these data cachelines into similar groups and sorting them can reveal cache contention. This patch creates an alogorithm based on various sample details that can help group entries together into data cachelines and allows 'perf report' to sort on it. The algorithm relies on having proper mmap2 support in the kernel to help determine if the memory map the data address belongs to is private to a pid or globally shared. The alogortithm is as follows: o group cpumodes together o group entries with discovered maps together o sort on major, minor, inode and inode generation numbers o if userspace anon, then sort on pid o sort on cachelines based on data addresses The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'. Sample output: # # Samples: 206 of event 'cpu/mem-loads/pp' # Total weight : 2534 # Sort order : dcacheline,pid # # Overhead Samples Data Cacheline Command: Pid # ........ ............ ...................................................................... .................. # 13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0 9.27% 1 [k] 0xffff88082e8cea80 swapper: 0 3.59% 2 [k] 0xffffffff819ba180 swapper: 0 0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0 0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0 Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column from prematurely tabbing over and mis-aligning. Not sure what the problem is. Signed-off-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-01 21:38:29 +08:00
#include <sys/mman.h>
#include "sort.h"
#include "hist.h"
#include "comm.h"
#include "symbol.h"
#include "evsel.h"
#include "evlist.h"
#include <traceevent/event-parse.h>
#include "mem-events.h"
regex_t parent_regex;
const char default_parent_pattern[] = "^sys_|^do_page_fault";
const char *parent_pattern = default_parent_pattern;
const char default_sort_order[] = "comm,dso,symbol";
const char default_branch_sort_order[] = "comm,dso_from,symbol_from,symbol_to,cycles";
const char default_mem_sort_order[] = "local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked";
const char default_top_sort_order[] = "dso,symbol";
const char default_diff_sort_order[] = "dso,symbol";
const char default_tracepoint_sort_order[] = "trace";
const char *sort_order;
const char *field_order;
perf report/top: Add option to collapse undesired parts of call graph For example, in an application with an expensive function implemented with deeply nested recursive calls, the default call-graph presentation is dominated by the different callchains within that function. By ignoring these callees, we can collect the callchains leading into the function and compactly identify what to blame for expensive calls. For example, in this report the callers of garbage_collect() are scattered across the tree: $ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z] 22.03% ruby [.] gc_mark --- gc_mark |--59.40%-- mark_keyvalue | st_foreach | gc_mark_children | |--99.75%-- rb_gc_mark | | rb_vm_mark | | gc_mark_children | | gc_marks | | |--99.00%-- garbage_collect If we ignore the callees of garbage_collect(), its callers are coalesced: $ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z] 72.92% ruby [.] garbage_collect --- garbage_collect vm_xmalloc |--47.08%-- ruby_xmalloc | st_insert2 | rb_hash_aset | |--98.45%-- features_index_add | | rb_provide_feature | | rb_require_safe | | vm_call_method Signed-off-by: Greg Price <price@mit.edu> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu Cc: Fengguang Wu <fengguang.wu@intel.com> [ remove spaces at beginning of line, reported by Fengguang Wu ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-12-07 13:48:05 +08:00
regex_t ignore_callees_regex;
int have_ignore_callees = 0;
int sort__need_collapse = 0;
int sort__has_parent = 0;
int sort__has_sym = 0;
int sort__has_dso = 0;
int sort__has_socket = 0;
int sort__has_thread = 0;
enum sort_mode sort__mode = SORT_MODE__NORMAL;
perf tools: Bind callchains to the first sort dimension column Currently, the callchains are displayed using a constant left margin. So depending on the current sort dimension configuration, callchains may appear to be well attached to the first sort dimension column field which is mostly the case, except when the first dimension of sorting is done by comm, because these are right aligned. This patch binds the callchain to the first letter in the first column, whatever type of column it is (dso, comm, symbol). Before: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent After: 0.80% perf [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify | | __fsnotify_parent Also, for clarity, we don't put anymore the callchain as is but: - If we have a top level ancestor in the callchain, start it with a first ascii hook. Before: 0.80% perf [kernel] [k] __lock_acquire __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] After: 0.80% perf [kernel] [k] __lock_acquire | --- __lock_acquire lock_acquire | |--58.33%-- _spin_lock | | | |--28.57%-- inotify_should_send_event | | fsnotify [..] [..] - Otherwise, if we have several top level ancestors, then display these like we did before: 1.69% Xorg | |--21.21%-- vread_hpet | 0x7fffd85b46fc | 0x7fffd85b494d | 0x7f4fafb4e54d | |--15.15%-- exaOffscreenAlloc | |--9.09%-- I830WaitLpRing Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1256246604-17156-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 05:23:23 +08:00
/*
* Replaces all occurrences of a char used with the:
*
* -t, --field-separator
*
* option, that uses a special separator character and don't pad with spaces,
* replacing all occurances of this separator in symbol names (and other
* output) with a '.' character, that thus it's the only non valid separator.
*/
static int repsep_snprintf(char *bf, size_t size, const char *fmt, ...)
{
int n;
va_list ap;
va_start(ap, fmt);
n = vsnprintf(bf, size, fmt, ap);
if (symbol_conf.field_sep && n > 0) {
char *sep = bf;
while (1) {
sep = strchr(sep, *symbol_conf.field_sep);
if (sep == NULL)
break;
*sep = '.';
}
}
va_end(ap);
perf tools: Incorrect use of snprintf results in SEGV I have a workload where perf top scribbles over the stack and we SEGV. What makes it interesting is that an snprintf is causing this. The workload is a c++ gem that has method names over 3000 characters long, but snprintf is designed to avoid overrunning buffers. So what went wrong? The problem is we assume snprintf returns the number of characters written: ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", self->level); ... ret += repsep_snprintf(bf + ret, size - ret, "%s", self->ms.sym->name); Unfortunately this is not how snprintf works. snprintf returns the number of characters that would have been written if there was enough space. In the above case, if the first snprintf returns a value larger than size, we pass a negative size into the second snprintf and happily scribble over the stack. If you have 3000 character c++ methods thats a lot of stack to trample. This patch fixes repsep_snprintf by clamping the value at size - 1 which is the maximum snprintf can write before adding the NULL terminator. I get the sinking feeling that there are a lot of other uses of snprintf that have this same bug, we should audit them all. Cc: David Ahern <dsahern@gmail.com> Cc: Eric B Munson <emunson@mgebm.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Cc: stable@kernel.org Link: http://lkml.kernel.org/r/20120307114249.44275ca3@kryten Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-03-07 08:42:49 +08:00
if (n >= (int)size)
return size - 1;
return n;
}
static int64_t cmp_null(const void *l, const void *r)
{
if (!l && !r)
return 0;
else if (!l)
return -1;
else
return 1;
}
/* --sort pid */
static int64_t
sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
{
return right->thread->tid - left->thread->tid;
}
static int hist_entry__thread_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
const char *comm = thread__comm_str(he->thread);
width = max(7U, width) - 6;
return repsep_snprintf(bf, size, "%5d:%-*.*s", he->thread->tid,
width, width, comm ?: "");
}
struct sort_entry sort_thread = {
.se_header = " Pid:Command",
.se_cmp = sort__thread_cmp,
.se_snprintf = hist_entry__thread_snprintf,
.se_width_idx = HISTC_THREAD,
};
/* --sort comm */
static int64_t
sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
{
/* Compare the addr that should be unique among comm */
return strcmp(comm__str(right->comm), comm__str(left->comm));
}
static int64_t
sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
{
/* Compare the addr that should be unique among comm */
return strcmp(comm__str(right->comm), comm__str(left->comm));
}
static int64_t
sort__comm_sort(struct hist_entry *left, struct hist_entry *right)
{
return strcmp(comm__str(right->comm), comm__str(left->comm));
}
static int hist_entry__comm_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return repsep_snprintf(bf, size, "%-*.*s", width, width, comm__str(he->comm));
}
struct sort_entry sort_comm = {
.se_header = "Command",
.se_cmp = sort__comm_cmp,
.se_collapse = sort__comm_collapse,
.se_sort = sort__comm_sort,
.se_snprintf = hist_entry__comm_snprintf,
.se_width_idx = HISTC_COMM,
};
/* --sort dso */
static int64_t _sort__dso_cmp(struct map *map_l, struct map *map_r)
{
struct dso *dso_l = map_l ? map_l->dso : NULL;
struct dso *dso_r = map_r ? map_r->dso : NULL;
const char *dso_name_l, *dso_name_r;
if (!dso_l || !dso_r)
return cmp_null(dso_r, dso_l);
if (verbose) {
dso_name_l = dso_l->long_name;
dso_name_r = dso_r->long_name;
} else {
dso_name_l = dso_l->short_name;
dso_name_r = dso_r->short_name;
}
return strcmp(dso_name_l, dso_name_r);
}
static int64_t
sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
{
return _sort__dso_cmp(right->ms.map, left->ms.map);
}
static int _hist_entry__dso_snprintf(struct map *map, char *bf,
size_t size, unsigned int width)
{
if (map && map->dso) {
const char *dso_name = !verbose ? map->dso->short_name :
map->dso->long_name;
return repsep_snprintf(bf, size, "%-*.*s", width, width, dso_name);
}
return repsep_snprintf(bf, size, "%-*.*s", width, width, "[unknown]");
}
static int hist_entry__dso_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return _hist_entry__dso_snprintf(he->ms.map, bf, size, width);
}
struct sort_entry sort_dso = {
.se_header = "Shared Object",
.se_cmp = sort__dso_cmp,
.se_snprintf = hist_entry__dso_snprintf,
.se_width_idx = HISTC_DSO,
};
/* --sort symbol */
static int64_t _sort__addr_cmp(u64 left_ip, u64 right_ip)
{
return (int64_t)(right_ip - left_ip);
}
static int64_t _sort__sym_cmp(struct symbol *sym_l, struct symbol *sym_r)
{
if (!sym_l || !sym_r)
return cmp_null(sym_l, sym_r);
if (sym_l == sym_r)
return 0;
if (sym_l->start != sym_r->start)
return (int64_t)(sym_r->start - sym_l->start);
return (int64_t)(sym_r->end - sym_l->end);
}
static int64_t
sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
{
int64_t ret;
if (!left->ms.sym && !right->ms.sym)
return _sort__addr_cmp(left->ip, right->ip);
/*
* comparing symbol address alone is not enough since it's a
* relative address within a dso.
*/
if (!sort__has_dso) {
ret = sort__dso_cmp(left, right);
if (ret != 0)
return ret;
}
return _sort__sym_cmp(left->ms.sym, right->ms.sym);
}
static int64_t
sort__sym_sort(struct hist_entry *left, struct hist_entry *right)
{
if (!left->ms.sym || !right->ms.sym)
return cmp_null(left->ms.sym, right->ms.sym);
return strcmp(right->ms.sym->name, left->ms.sym->name);
}
static int _hist_entry__sym_snprintf(struct map *map, struct symbol *sym,
u64 ip, char level, char *bf, size_t size,
unsigned int width)
{
size_t ret = 0;
if (verbose) {
char o = map ? dso__symtab_origin(map->dso) : '!';
ret += repsep_snprintf(bf, size, "%-#*llx %c ",
BITS_PER_LONG / 4 + 2, ip, o);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 14:29:58 +08:00
}
ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", level);
if (sym && map) {
if (map->type == MAP__VARIABLE) {
ret += repsep_snprintf(bf + ret, size - ret, "%s", sym->name);
ret += repsep_snprintf(bf + ret, size - ret, "+0x%llx",
ip - map->unmap_ip(map, sym->start));
} else {
ret += repsep_snprintf(bf + ret, size - ret, "%.*s",
width - ret,
sym->name);
}
} else {
size_t len = BITS_PER_LONG / 4;
ret += repsep_snprintf(bf + ret, size - ret, "%-#.*llx",
len, ip);
}
return ret;
}
static int hist_entry__sym_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return _hist_entry__sym_snprintf(he->ms.map, he->ms.sym, he->ip,
he->level, bf, size, width);
}
struct sort_entry sort_sym = {
.se_header = "Symbol",
.se_cmp = sort__sym_cmp,
.se_sort = sort__sym_sort,
.se_snprintf = hist_entry__sym_snprintf,
.se_width_idx = HISTC_SYMBOL,
};
perf tools: Add sort by src line/number Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 21:33:24 +08:00
/* --sort srcline */
static char *hist_entry__get_srcline(struct hist_entry *he)
{
struct map *map = he->ms.map;
if (!map)
return SRCLINE_UNKNOWN;
return get_srcline(map->dso, map__rip_2objdump(map, he->ip),
he->ms.sym, true);
}
perf tools: Add sort by src line/number Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 21:33:24 +08:00
static int64_t
sort__srcline_cmp(struct hist_entry *left, struct hist_entry *right)
{
if (!left->srcline)
left->srcline = hist_entry__get_srcline(left);
if (!right->srcline)
right->srcline = hist_entry__get_srcline(right);
return strcmp(right->srcline, left->srcline);
perf tools: Add sort by src line/number Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 21:33:24 +08:00
}
static int hist_entry__srcline_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
perf tools: Add sort by src line/number Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 21:33:24 +08:00
{
if (!he->srcline)
he->srcline = hist_entry__get_srcline(he);
return repsep_snprintf(bf, size, "%-.*s", width, he->srcline);
perf tools: Add sort by src line/number Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 21:33:24 +08:00
}
struct sort_entry sort_srcline = {
.se_header = "Source:Line",
.se_cmp = sort__srcline_cmp,
.se_snprintf = hist_entry__srcline_snprintf,
.se_width_idx = HISTC_SRCLINE,
};
perf report: Add support for srcfile sort key In some cases it's useful to characterize samples by file. This is useful to get a higher level categorization, for example to map cost to subsystems. Add a srcfile sort key to perf report. It builds on top of the existing srcline support. Commiter notes: E.g.: # perf record -F 10000 usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ] [root@zoo ~]# perf report -s srcfile --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File # ........ ........... 60.99% . 20.62% paravirt.h 14.23% rmap.c 4.04% signal.c 0.11% msr.h # The first line is collecting all the files for which srcfiles couldn't somehow get resolved to: # perf report -s srcfile,dso --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File Shared Object # ........ ........... ................ 40.97% . ld-2.20.so 20.62% paravirt.h [kernel.vmlinux] 20.02% . libc-2.20.so 14.23% rmap.c [kernel.vmlinux] 4.04% signal.c [kernel.vmlinux] 0.11% msr.h [kernel.vmlinux] # XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't seen this on Fedora 22. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org [ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08 06:54:24 +08:00
/* --sort srcfile */
static char no_srcfile[1];
static char *hist_entry__get_srcfile(struct hist_entry *e)
perf report: Add support for srcfile sort key In some cases it's useful to characterize samples by file. This is useful to get a higher level categorization, for example to map cost to subsystems. Add a srcfile sort key to perf report. It builds on top of the existing srcline support. Commiter notes: E.g.: # perf record -F 10000 usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ] [root@zoo ~]# perf report -s srcfile --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File # ........ ........... 60.99% . 20.62% paravirt.h 14.23% rmap.c 4.04% signal.c 0.11% msr.h # The first line is collecting all the files for which srcfiles couldn't somehow get resolved to: # perf report -s srcfile,dso --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File Shared Object # ........ ........... ................ 40.97% . ld-2.20.so 20.62% paravirt.h [kernel.vmlinux] 20.02% . libc-2.20.so 14.23% rmap.c [kernel.vmlinux] 4.04% signal.c [kernel.vmlinux] 0.11% msr.h [kernel.vmlinux] # XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't seen this on Fedora 22. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org [ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08 06:54:24 +08:00
{
char *sf, *p;
struct map *map = e->ms.map;
if (!map)
return no_srcfile;
sf = __get_srcline(map->dso, map__rip_2objdump(map, e->ip),
e->ms.sym, false, true);
if (!strcmp(sf, SRCLINE_UNKNOWN))
return no_srcfile;
perf report: Add support for srcfile sort key In some cases it's useful to characterize samples by file. This is useful to get a higher level categorization, for example to map cost to subsystems. Add a srcfile sort key to perf report. It builds on top of the existing srcline support. Commiter notes: E.g.: # perf record -F 10000 usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ] [root@zoo ~]# perf report -s srcfile --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File # ........ ........... 60.99% . 20.62% paravirt.h 14.23% rmap.c 4.04% signal.c 0.11% msr.h # The first line is collecting all the files for which srcfiles couldn't somehow get resolved to: # perf report -s srcfile,dso --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File Shared Object # ........ ........... ................ 40.97% . ld-2.20.so 20.62% paravirt.h [kernel.vmlinux] 20.02% . libc-2.20.so 14.23% rmap.c [kernel.vmlinux] 4.04% signal.c [kernel.vmlinux] 0.11% msr.h [kernel.vmlinux] # XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't seen this on Fedora 22. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org [ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08 06:54:24 +08:00
p = strchr(sf, ':');
if (p && *sf) {
*p = 0;
return sf;
}
free(sf);
return no_srcfile;
}
static int64_t
sort__srcfile_cmp(struct hist_entry *left, struct hist_entry *right)
{
if (!left->srcfile)
left->srcfile = hist_entry__get_srcfile(left);
if (!right->srcfile)
right->srcfile = hist_entry__get_srcfile(right);
perf report: Add support for srcfile sort key In some cases it's useful to characterize samples by file. This is useful to get a higher level categorization, for example to map cost to subsystems. Add a srcfile sort key to perf report. It builds on top of the existing srcline support. Commiter notes: E.g.: # perf record -F 10000 usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ] [root@zoo ~]# perf report -s srcfile --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File # ........ ........... 60.99% . 20.62% paravirt.h 14.23% rmap.c 4.04% signal.c 0.11% msr.h # The first line is collecting all the files for which srcfiles couldn't somehow get resolved to: # perf report -s srcfile,dso --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File Shared Object # ........ ........... ................ 40.97% . ld-2.20.so 20.62% paravirt.h [kernel.vmlinux] 20.02% . libc-2.20.so 14.23% rmap.c [kernel.vmlinux] 4.04% signal.c [kernel.vmlinux] 0.11% msr.h [kernel.vmlinux] # XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't seen this on Fedora 22. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org [ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08 06:54:24 +08:00
return strcmp(right->srcfile, left->srcfile);
}
static int hist_entry__srcfile_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
if (!he->srcfile)
he->srcfile = hist_entry__get_srcfile(he);
return repsep_snprintf(bf, size, "%-.*s", width, he->srcfile);
perf report: Add support for srcfile sort key In some cases it's useful to characterize samples by file. This is useful to get a higher level categorization, for example to map cost to subsystems. Add a srcfile sort key to perf report. It builds on top of the existing srcline support. Commiter notes: E.g.: # perf record -F 10000 usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ] [root@zoo ~]# perf report -s srcfile --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File # ........ ........... 60.99% . 20.62% paravirt.h 14.23% rmap.c 4.04% signal.c 0.11% msr.h # The first line is collecting all the files for which srcfiles couldn't somehow get resolved to: # perf report -s srcfile,dso --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File Shared Object # ........ ........... ................ 40.97% . ld-2.20.so 20.62% paravirt.h [kernel.vmlinux] 20.02% . libc-2.20.so 14.23% rmap.c [kernel.vmlinux] 4.04% signal.c [kernel.vmlinux] 0.11% msr.h [kernel.vmlinux] # XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't seen this on Fedora 22. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org [ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08 06:54:24 +08:00
}
struct sort_entry sort_srcfile = {
.se_header = "Source File",
.se_cmp = sort__srcfile_cmp,
.se_snprintf = hist_entry__srcfile_snprintf,
.se_width_idx = HISTC_SRCFILE,
};
/* --sort parent */
static int64_t
sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
{
struct symbol *sym_l = left->parent;
struct symbol *sym_r = right->parent;
if (!sym_l || !sym_r)
return cmp_null(sym_l, sym_r);
return strcmp(sym_r->name, sym_l->name);
}
static int hist_entry__parent_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return repsep_snprintf(bf, size, "%-*.*s", width, width,
he->parent ? he->parent->name : "[other]");
}
struct sort_entry sort_parent = {
.se_header = "Parent symbol",
.se_cmp = sort__parent_cmp,
.se_snprintf = hist_entry__parent_snprintf,
.se_width_idx = HISTC_PARENT,
};
/* --sort cpu */
static int64_t
sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right)
{
return right->cpu - left->cpu;
}
static int hist_entry__cpu_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return repsep_snprintf(bf, size, "%*.*d", width, width, he->cpu);
}
struct sort_entry sort_cpu = {
.se_header = "CPU",
.se_cmp = sort__cpu_cmp,
.se_snprintf = hist_entry__cpu_snprintf,
.se_width_idx = HISTC_CPU,
};
/* --sort socket */
static int64_t
sort__socket_cmp(struct hist_entry *left, struct hist_entry *right)
{
return right->socket - left->socket;
}
static int hist_entry__socket_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return repsep_snprintf(bf, size, "%*.*d", width, width-3, he->socket);
}
struct sort_entry sort_socket = {
.se_header = "Socket",
.se_cmp = sort__socket_cmp,
.se_snprintf = hist_entry__socket_snprintf,
.se_width_idx = HISTC_SOCKET,
};
perf tools: Add 'trace' sort key The 'trace' sort key is to show tracepoint event output using either print fmt or plugin. For example sched_switch event (using plugin) will show output like below: # perf record -e sched:sched_switch -a usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ] # $ perf report -s trace --stdio ... # Overhead Trace output # ........ ................................................... # 9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120] 9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120] 9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120] 8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120] 5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100] 5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120] 1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120] 1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120] 1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120] 1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120] 1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49] 1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120] Note that the 'trace' sort key works only for tracepoint events. If it's used to other type of events, just "N/A" will be printed. Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:04 +08:00
/* --sort trace */
static char *get_trace_output(struct hist_entry *he)
{
struct trace_seq seq;
struct perf_evsel *evsel;
struct pevent_record rec = {
.data = he->raw_data,
.size = he->raw_size,
};
evsel = hists_to_evsel(he->hists);
trace_seq_init(&seq);
if (symbol_conf.raw_trace) {
pevent_print_fields(&seq, he->raw_data, he->raw_size,
evsel->tp_format);
} else {
pevent_event_info(&seq, evsel->tp_format, &rec);
}
perf tools: Add 'trace' sort key The 'trace' sort key is to show tracepoint event output using either print fmt or plugin. For example sched_switch event (using plugin) will show output like below: # perf record -e sched:sched_switch -a usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ] # $ perf report -s trace --stdio ... # Overhead Trace output # ........ ................................................... # 9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120] 9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120] 9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120] 8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120] 5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100] 5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120] 1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120] 1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120] 1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120] 1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120] 1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49] 1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120] Note that the 'trace' sort key works only for tracepoint events. If it's used to other type of events, just "N/A" will be printed. Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:04 +08:00
return seq.buffer;
}
static int64_t
sort__trace_cmp(struct hist_entry *left, struct hist_entry *right)
{
struct perf_evsel *evsel;
evsel = hists_to_evsel(left->hists);
if (evsel->attr.type != PERF_TYPE_TRACEPOINT)
return 0;
if (left->trace_output == NULL)
left->trace_output = get_trace_output(left);
if (right->trace_output == NULL)
right->trace_output = get_trace_output(right);
return strcmp(right->trace_output, left->trace_output);
}
static int hist_entry__trace_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
struct perf_evsel *evsel;
evsel = hists_to_evsel(he->hists);
if (evsel->attr.type != PERF_TYPE_TRACEPOINT)
return scnprintf(bf, size, "%-.*s", width, "N/A");
perf tools: Add 'trace' sort key The 'trace' sort key is to show tracepoint event output using either print fmt or plugin. For example sched_switch event (using plugin) will show output like below: # perf record -e sched:sched_switch -a usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ] # $ perf report -s trace --stdio ... # Overhead Trace output # ........ ................................................... # 9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120] 9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120] 9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120] 8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120] 5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100] 5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120] 1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120] 1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120] 1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120] 1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120] 1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49] 1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120] Note that the 'trace' sort key works only for tracepoint events. If it's used to other type of events, just "N/A" will be printed. Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:04 +08:00
if (he->trace_output == NULL)
he->trace_output = get_trace_output(he);
return repsep_snprintf(bf, size, "%-.*s", width, he->trace_output);
perf tools: Add 'trace' sort key The 'trace' sort key is to show tracepoint event output using either print fmt or plugin. For example sched_switch event (using plugin) will show output like below: # perf record -e sched:sched_switch -a usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ] # $ perf report -s trace --stdio ... # Overhead Trace output # ........ ................................................... # 9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120] 9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120] 9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120] 8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120] 5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100] 5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120] 1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120] 1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120] 1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120] 1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120] 1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49] 1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120] Note that the 'trace' sort key works only for tracepoint events. If it's used to other type of events, just "N/A" will be printed. Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:04 +08:00
}
struct sort_entry sort_trace = {
.se_header = "Trace output",
.se_cmp = sort__trace_cmp,
.se_snprintf = hist_entry__trace_snprintf,
.se_width_idx = HISTC_TRACE,
};
/* sort keys for branch stacks */
static int64_t
sort__dso_from_cmp(struct hist_entry *left, struct hist_entry *right)
{
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
return _sort__dso_cmp(left->branch_info->from.map,
right->branch_info->from.map);
}
static int hist_entry__dso_from_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
if (he->branch_info)
return _hist_entry__dso_snprintf(he->branch_info->from.map,
bf, size, width);
else
return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int64_t
sort__dso_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
return _sort__dso_cmp(left->branch_info->to.map,
right->branch_info->to.map);
}
static int hist_entry__dso_to_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
if (he->branch_info)
return _hist_entry__dso_snprintf(he->branch_info->to.map,
bf, size, width);
else
return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int64_t
sort__sym_from_cmp(struct hist_entry *left, struct hist_entry *right)
{
struct addr_map_symbol *from_l = &left->branch_info->from;
struct addr_map_symbol *from_r = &right->branch_info->from;
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
from_l = &left->branch_info->from;
from_r = &right->branch_info->from;
if (!from_l->sym && !from_r->sym)
return _sort__addr_cmp(from_l->addr, from_r->addr);
return _sort__sym_cmp(from_l->sym, from_r->sym);
}
static int64_t
sort__sym_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
struct addr_map_symbol *to_l, *to_r;
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
to_l = &left->branch_info->to;
to_r = &right->branch_info->to;
if (!to_l->sym && !to_r->sym)
return _sort__addr_cmp(to_l->addr, to_r->addr);
return _sort__sym_cmp(to_l->sym, to_r->sym);
}
static int hist_entry__sym_from_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
if (he->branch_info) {
struct addr_map_symbol *from = &he->branch_info->from;
return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
he->level, bf, size, width);
}
return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int hist_entry__sym_to_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
if (he->branch_info) {
struct addr_map_symbol *to = &he->branch_info->to;
return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
he->level, bf, size, width);
}
return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
struct sort_entry sort_dso_from = {
.se_header = "Source Shared Object",
.se_cmp = sort__dso_from_cmp,
.se_snprintf = hist_entry__dso_from_snprintf,
.se_width_idx = HISTC_DSO_FROM,
};
struct sort_entry sort_dso_to = {
.se_header = "Target Shared Object",
.se_cmp = sort__dso_to_cmp,
.se_snprintf = hist_entry__dso_to_snprintf,
.se_width_idx = HISTC_DSO_TO,
};
struct sort_entry sort_sym_from = {
.se_header = "Source Symbol",
.se_cmp = sort__sym_from_cmp,
.se_snprintf = hist_entry__sym_from_snprintf,
.se_width_idx = HISTC_SYMBOL_FROM,
};
struct sort_entry sort_sym_to = {
.se_header = "Target Symbol",
.se_cmp = sort__sym_to_cmp,
.se_snprintf = hist_entry__sym_to_snprintf,
.se_width_idx = HISTC_SYMBOL_TO,
};
static int64_t
sort__mispredict_cmp(struct hist_entry *left, struct hist_entry *right)
{
unsigned char mp, p;
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
mp = left->branch_info->flags.mispred != right->branch_info->flags.mispred;
p = left->branch_info->flags.predicted != right->branch_info->flags.predicted;
return mp || p;
}
static int hist_entry__mispredict_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width){
static const char *out = "N/A";
if (he->branch_info) {
if (he->branch_info->flags.predicted)
out = "N";
else if (he->branch_info->flags.mispred)
out = "Y";
}
return repsep_snprintf(bf, size, "%-*.*s", width, width, out);
}
static int64_t
sort__cycles_cmp(struct hist_entry *left, struct hist_entry *right)
{
return left->branch_info->flags.cycles -
right->branch_info->flags.cycles;
}
static int hist_entry__cycles_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
if (he->branch_info->flags.cycles == 0)
return repsep_snprintf(bf, size, "%-*s", width, "-");
return repsep_snprintf(bf, size, "%-*hd", width,
he->branch_info->flags.cycles);
}
struct sort_entry sort_cycles = {
.se_header = "Basic Block Cycles",
.se_cmp = sort__cycles_cmp,
.se_snprintf = hist_entry__cycles_snprintf,
.se_width_idx = HISTC_CYCLES,
};
/* --sort daddr_sym */
static int64_t
sort__daddr_cmp(struct hist_entry *left, struct hist_entry *right)
{
uint64_t l = 0, r = 0;
if (left->mem_info)
l = left->mem_info->daddr.addr;
if (right->mem_info)
r = right->mem_info->daddr.addr;
return (int64_t)(r - l);
}
static int hist_entry__daddr_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
uint64_t addr = 0;
struct map *map = NULL;
struct symbol *sym = NULL;
if (he->mem_info) {
addr = he->mem_info->daddr.addr;
map = he->mem_info->daddr.map;
sym = he->mem_info->daddr.sym;
}
return _hist_entry__sym_snprintf(map, sym, addr, he->level, bf, size,
width);
}
static int64_t
sort__iaddr_cmp(struct hist_entry *left, struct hist_entry *right)
{
uint64_t l = 0, r = 0;
if (left->mem_info)
l = left->mem_info->iaddr.addr;
if (right->mem_info)
r = right->mem_info->iaddr.addr;
return (int64_t)(r - l);
}
static int hist_entry__iaddr_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
uint64_t addr = 0;
struct map *map = NULL;
struct symbol *sym = NULL;
if (he->mem_info) {
addr = he->mem_info->iaddr.addr;
map = he->mem_info->iaddr.map;
sym = he->mem_info->iaddr.sym;
}
return _hist_entry__sym_snprintf(map, sym, addr, he->level, bf, size,
width);
}
static int64_t
sort__dso_daddr_cmp(struct hist_entry *left, struct hist_entry *right)
{
struct map *map_l = NULL;
struct map *map_r = NULL;
if (left->mem_info)
map_l = left->mem_info->daddr.map;
if (right->mem_info)
map_r = right->mem_info->daddr.map;
return _sort__dso_cmp(map_l, map_r);
}
static int hist_entry__dso_daddr_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
struct map *map = NULL;
if (he->mem_info)
map = he->mem_info->daddr.map;
return _hist_entry__dso_snprintf(map, bf, size, width);
}
static int64_t
sort__locked_cmp(struct hist_entry *left, struct hist_entry *right)
{
union perf_mem_data_src data_src_l;
union perf_mem_data_src data_src_r;
if (left->mem_info)
data_src_l = left->mem_info->data_src;
else
data_src_l.mem_lock = PERF_MEM_LOCK_NA;
if (right->mem_info)
data_src_r = right->mem_info->data_src;
else
data_src_r.mem_lock = PERF_MEM_LOCK_NA;
return (int64_t)(data_src_r.mem_lock - data_src_l.mem_lock);
}
static int hist_entry__locked_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
const char *out;
u64 mask = PERF_MEM_LOCK_NA;
if (he->mem_info)
mask = he->mem_info->data_src.mem_lock;
if (mask & PERF_MEM_LOCK_NA)
out = "N/A";
else if (mask & PERF_MEM_LOCK_LOCKED)
out = "Yes";
else
out = "No";
return repsep_snprintf(bf, size, "%.*s", width, out);
}
static int64_t
sort__tlb_cmp(struct hist_entry *left, struct hist_entry *right)
{
union perf_mem_data_src data_src_l;
union perf_mem_data_src data_src_r;
if (left->mem_info)
data_src_l = left->mem_info->data_src;
else
data_src_l.mem_dtlb = PERF_MEM_TLB_NA;
if (right->mem_info)
data_src_r = right->mem_info->data_src;
else
data_src_r.mem_dtlb = PERF_MEM_TLB_NA;
return (int64_t)(data_src_r.mem_dtlb - data_src_l.mem_dtlb);
}
static int hist_entry__tlb_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
char out[64];
perf_mem__tlb_scnprintf(out, sizeof(out), he->mem_info);
return repsep_snprintf(bf, size, "%-*s", width, out);
}
static int64_t
sort__lvl_cmp(struct hist_entry *left, struct hist_entry *right)
{
union perf_mem_data_src data_src_l;
union perf_mem_data_src data_src_r;
if (left->mem_info)
data_src_l = left->mem_info->data_src;
else
data_src_l.mem_lvl = PERF_MEM_LVL_NA;
if (right->mem_info)
data_src_r = right->mem_info->data_src;
else
data_src_r.mem_lvl = PERF_MEM_LVL_NA;
return (int64_t)(data_src_r.mem_lvl - data_src_l.mem_lvl);
}
static int hist_entry__lvl_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
char out[64];
perf_mem__lvl_scnprintf(out, sizeof(out), he->mem_info);
return repsep_snprintf(bf, size, "%-*s", width, out);
}
static int64_t
sort__snoop_cmp(struct hist_entry *left, struct hist_entry *right)
{
union perf_mem_data_src data_src_l;
union perf_mem_data_src data_src_r;
if (left->mem_info)
data_src_l = left->mem_info->data_src;
else
data_src_l.mem_snoop = PERF_MEM_SNOOP_NA;
if (right->mem_info)
data_src_r = right->mem_info->data_src;
else
data_src_r.mem_snoop = PERF_MEM_SNOOP_NA;
return (int64_t)(data_src_r.mem_snoop - data_src_l.mem_snoop);
}
static int hist_entry__snoop_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
char out[64];
perf_mem__snp_scnprintf(out, sizeof(out), he->mem_info);
return repsep_snprintf(bf, size, "%-*s", width, out);
}
perf tools: Add dcacheline sort In perf's 'mem-mode', one can get access to a whole bunch of details specific to a particular sample instruction. A bunch of those details relate to the data address. One interesting thing you can do with data addresses is to convert them into a unique cacheline they belong too. Organizing these data cachelines into similar groups and sorting them can reveal cache contention. This patch creates an alogorithm based on various sample details that can help group entries together into data cachelines and allows 'perf report' to sort on it. The algorithm relies on having proper mmap2 support in the kernel to help determine if the memory map the data address belongs to is private to a pid or globally shared. The alogortithm is as follows: o group cpumodes together o group entries with discovered maps together o sort on major, minor, inode and inode generation numbers o if userspace anon, then sort on pid o sort on cachelines based on data addresses The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'. Sample output: # # Samples: 206 of event 'cpu/mem-loads/pp' # Total weight : 2534 # Sort order : dcacheline,pid # # Overhead Samples Data Cacheline Command: Pid # ........ ............ ...................................................................... .................. # 13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0 9.27% 1 [k] 0xffff88082e8cea80 swapper: 0 3.59% 2 [k] 0xffffffff819ba180 swapper: 0 0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0 0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0 Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column from prematurely tabbing over and mis-aligning. Not sure what the problem is. Signed-off-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-01 21:38:29 +08:00
static int64_t
sort__dcacheline_cmp(struct hist_entry *left, struct hist_entry *right)
{
u64 l, r;
struct map *l_map, *r_map;
if (!left->mem_info) return -1;
if (!right->mem_info) return 1;
/* group event types together */
if (left->cpumode > right->cpumode) return -1;
if (left->cpumode < right->cpumode) return 1;
l_map = left->mem_info->daddr.map;
r_map = right->mem_info->daddr.map;
/* if both are NULL, jump to sort on al_addr instead */
if (!l_map && !r_map)
goto addr;
if (!l_map) return -1;
if (!r_map) return 1;
if (l_map->maj > r_map->maj) return -1;
if (l_map->maj < r_map->maj) return 1;
if (l_map->min > r_map->min) return -1;
if (l_map->min < r_map->min) return 1;
if (l_map->ino > r_map->ino) return -1;
if (l_map->ino < r_map->ino) return 1;
if (l_map->ino_generation > r_map->ino_generation) return -1;
if (l_map->ino_generation < r_map->ino_generation) return 1;
/*
* Addresses with no major/minor numbers are assumed to be
* anonymous in userspace. Sort those on pid then address.
*
* The kernel and non-zero major/minor mapped areas are
* assumed to be unity mapped. Sort those on address.
*/
if ((left->cpumode != PERF_RECORD_MISC_KERNEL) &&
(!(l_map->flags & MAP_SHARED)) &&
!l_map->maj && !l_map->min && !l_map->ino &&
!l_map->ino_generation) {
/* userspace anonymous */
if (left->thread->pid_ > right->thread->pid_) return -1;
if (left->thread->pid_ < right->thread->pid_) return 1;
}
addr:
/* al_addr does all the right addr - start + offset calculations */
l = cl_address(left->mem_info->daddr.al_addr);
r = cl_address(right->mem_info->daddr.al_addr);
if (l > r) return -1;
if (l < r) return 1;
return 0;
}
static int hist_entry__dcacheline_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
uint64_t addr = 0;
struct map *map = NULL;
struct symbol *sym = NULL;
char level = he->level;
if (he->mem_info) {
addr = cl_address(he->mem_info->daddr.al_addr);
map = he->mem_info->daddr.map;
sym = he->mem_info->daddr.sym;
/* print [s] for shared data mmaps */
if ((he->cpumode != PERF_RECORD_MISC_KERNEL) &&
map && (map->type == MAP__VARIABLE) &&
(map->flags & MAP_SHARED) &&
(map->maj || map->min || map->ino ||
map->ino_generation))
level = 's';
else if (!map)
level = 'X';
}
return _hist_entry__sym_snprintf(map, sym, addr, level, bf, size,
width);
}
struct sort_entry sort_mispredict = {
.se_header = "Branch Mispredicted",
.se_cmp = sort__mispredict_cmp,
.se_snprintf = hist_entry__mispredict_snprintf,
.se_width_idx = HISTC_MISPREDICT,
};
static u64 he_weight(struct hist_entry *he)
{
return he->stat.nr_events ? he->stat.weight / he->stat.nr_events : 0;
}
static int64_t
sort__local_weight_cmp(struct hist_entry *left, struct hist_entry *right)
{
return he_weight(left) - he_weight(right);
}
static int hist_entry__local_weight_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return repsep_snprintf(bf, size, "%-*llu", width, he_weight(he));
}
struct sort_entry sort_local_weight = {
.se_header = "Local Weight",
.se_cmp = sort__local_weight_cmp,
.se_snprintf = hist_entry__local_weight_snprintf,
.se_width_idx = HISTC_LOCAL_WEIGHT,
};
static int64_t
sort__global_weight_cmp(struct hist_entry *left, struct hist_entry *right)
{
return left->stat.weight - right->stat.weight;
}
static int hist_entry__global_weight_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
return repsep_snprintf(bf, size, "%-*llu", width, he->stat.weight);
}
struct sort_entry sort_global_weight = {
.se_header = "Weight",
.se_cmp = sort__global_weight_cmp,
.se_snprintf = hist_entry__global_weight_snprintf,
.se_width_idx = HISTC_GLOBAL_WEIGHT,
};
struct sort_entry sort_mem_daddr_sym = {
.se_header = "Data Symbol",
.se_cmp = sort__daddr_cmp,
.se_snprintf = hist_entry__daddr_snprintf,
.se_width_idx = HISTC_MEM_DADDR_SYMBOL,
};
struct sort_entry sort_mem_iaddr_sym = {
.se_header = "Code Symbol",
.se_cmp = sort__iaddr_cmp,
.se_snprintf = hist_entry__iaddr_snprintf,
.se_width_idx = HISTC_MEM_IADDR_SYMBOL,
};
struct sort_entry sort_mem_daddr_dso = {
.se_header = "Data Object",
.se_cmp = sort__dso_daddr_cmp,
.se_snprintf = hist_entry__dso_daddr_snprintf,
.se_width_idx = HISTC_MEM_DADDR_SYMBOL,
};
struct sort_entry sort_mem_locked = {
.se_header = "Locked",
.se_cmp = sort__locked_cmp,
.se_snprintf = hist_entry__locked_snprintf,
.se_width_idx = HISTC_MEM_LOCKED,
};
struct sort_entry sort_mem_tlb = {
.se_header = "TLB access",
.se_cmp = sort__tlb_cmp,
.se_snprintf = hist_entry__tlb_snprintf,
.se_width_idx = HISTC_MEM_TLB,
};
struct sort_entry sort_mem_lvl = {
.se_header = "Memory access",
.se_cmp = sort__lvl_cmp,
.se_snprintf = hist_entry__lvl_snprintf,
.se_width_idx = HISTC_MEM_LVL,
};
struct sort_entry sort_mem_snoop = {
.se_header = "Snoop",
.se_cmp = sort__snoop_cmp,
.se_snprintf = hist_entry__snoop_snprintf,
.se_width_idx = HISTC_MEM_SNOOP,
};
perf tools: Add dcacheline sort In perf's 'mem-mode', one can get access to a whole bunch of details specific to a particular sample instruction. A bunch of those details relate to the data address. One interesting thing you can do with data addresses is to convert them into a unique cacheline they belong too. Organizing these data cachelines into similar groups and sorting them can reveal cache contention. This patch creates an alogorithm based on various sample details that can help group entries together into data cachelines and allows 'perf report' to sort on it. The algorithm relies on having proper mmap2 support in the kernel to help determine if the memory map the data address belongs to is private to a pid or globally shared. The alogortithm is as follows: o group cpumodes together o group entries with discovered maps together o sort on major, minor, inode and inode generation numbers o if userspace anon, then sort on pid o sort on cachelines based on data addresses The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'. Sample output: # # Samples: 206 of event 'cpu/mem-loads/pp' # Total weight : 2534 # Sort order : dcacheline,pid # # Overhead Samples Data Cacheline Command: Pid # ........ ............ ...................................................................... .................. # 13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0 9.27% 1 [k] 0xffff88082e8cea80 swapper: 0 3.59% 2 [k] 0xffffffff819ba180 swapper: 0 0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0 0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0 Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column from prematurely tabbing over and mis-aligning. Not sure what the problem is. Signed-off-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-01 21:38:29 +08:00
struct sort_entry sort_mem_dcacheline = {
.se_header = "Data Cacheline",
.se_cmp = sort__dcacheline_cmp,
.se_snprintf = hist_entry__dcacheline_snprintf,
.se_width_idx = HISTC_MEM_DCACHELINE,
};
static int64_t
sort__abort_cmp(struct hist_entry *left, struct hist_entry *right)
{
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
return left->branch_info->flags.abort !=
right->branch_info->flags.abort;
}
static int hist_entry__abort_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
static const char *out = "N/A";
if (he->branch_info) {
if (he->branch_info->flags.abort)
out = "A";
else
out = ".";
}
return repsep_snprintf(bf, size, "%-*s", width, out);
}
struct sort_entry sort_abort = {
.se_header = "Transaction abort",
.se_cmp = sort__abort_cmp,
.se_snprintf = hist_entry__abort_snprintf,
.se_width_idx = HISTC_ABORT,
};
static int64_t
sort__in_tx_cmp(struct hist_entry *left, struct hist_entry *right)
{
if (!left->branch_info || !right->branch_info)
return cmp_null(left->branch_info, right->branch_info);
return left->branch_info->flags.in_tx !=
right->branch_info->flags.in_tx;
}
static int hist_entry__in_tx_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
static const char *out = "N/A";
if (he->branch_info) {
if (he->branch_info->flags.in_tx)
out = "T";
else
out = ".";
}
return repsep_snprintf(bf, size, "%-*s", width, out);
}
struct sort_entry sort_in_tx = {
.se_header = "Branch in transaction",
.se_cmp = sort__in_tx_cmp,
.se_snprintf = hist_entry__in_tx_snprintf,
.se_width_idx = HISTC_IN_TX,
};
static int64_t
sort__transaction_cmp(struct hist_entry *left, struct hist_entry *right)
{
return left->transaction - right->transaction;
}
static inline char *add_str(char *p, const char *str)
{
strcpy(p, str);
return p + strlen(str);
}
static struct txbit {
unsigned flag;
const char *name;
int skip_for_len;
} txbits[] = {
{ PERF_TXN_ELISION, "EL ", 0 },
{ PERF_TXN_TRANSACTION, "TX ", 1 },
{ PERF_TXN_SYNC, "SYNC ", 1 },
{ PERF_TXN_ASYNC, "ASYNC ", 0 },
{ PERF_TXN_RETRY, "RETRY ", 0 },
{ PERF_TXN_CONFLICT, "CON ", 0 },
{ PERF_TXN_CAPACITY_WRITE, "CAP-WRITE ", 1 },
{ PERF_TXN_CAPACITY_READ, "CAP-READ ", 0 },
{ 0, NULL, 0 }
};
int hist_entry__transaction_len(void)
{
int i;
int len = 0;
for (i = 0; txbits[i].name; i++) {
if (!txbits[i].skip_for_len)
len += strlen(txbits[i].name);
}
len += 4; /* :XX<space> */
return len;
}
static int hist_entry__transaction_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
u64 t = he->transaction;
char buf[128];
char *p = buf;
int i;
buf[0] = 0;
for (i = 0; txbits[i].name; i++)
if (txbits[i].flag & t)
p = add_str(p, txbits[i].name);
if (t && !(t & (PERF_TXN_SYNC|PERF_TXN_ASYNC)))
p = add_str(p, "NEITHER ");
if (t & PERF_TXN_ABORT_MASK) {
sprintf(p, ":%" PRIx64,
(t & PERF_TXN_ABORT_MASK) >>
PERF_TXN_ABORT_SHIFT);
p += strlen(p);
}
return repsep_snprintf(bf, size, "%-*s", width, buf);
}
struct sort_entry sort_transaction = {
.se_header = "Transaction ",
.se_cmp = sort__transaction_cmp,
.se_snprintf = hist_entry__transaction_snprintf,
.se_width_idx = HISTC_TRANSACTION,
};
struct sort_dimension {
const char *name;
struct sort_entry *entry;
int taken;
};
#define DIM(d, n, func) [d] = { .name = n, .entry = &(func) }
static struct sort_dimension common_sort_dimensions[] = {
DIM(SORT_PID, "pid", sort_thread),
DIM(SORT_COMM, "comm", sort_comm),
DIM(SORT_DSO, "dso", sort_dso),
DIM(SORT_SYM, "symbol", sort_sym),
DIM(SORT_PARENT, "parent", sort_parent),
DIM(SORT_CPU, "cpu", sort_cpu),
DIM(SORT_SOCKET, "socket", sort_socket),
perf tools: Add sort by src line/number Using addr2line for now, requires debuginfo, needs more work to support detached debuginfo, aka foo-debuginfo packages. Example: [root@sandy ~]# perf record -a sleep 3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.555 MB perf.data (~24236 samples) ] [root@sandy ~]# perf report -s dso,srcline 2>&1 | grep -v ^# | head -5 22.41% [kernel.kallsyms] /home/git/linux/drivers/idle/intel_idle.c:280 4.79% [kernel.kallsyms] /home/git/linux/drivers/cpuidle/cpuidle.c:148 4.78% [kernel.kallsyms] /home/git/linux/arch/x86/include/asm/atomic64_64.h:121 4.49% [kernel.kallsyms] /home/git/linux/kernel/sched/core.c:1690 4.30% [kernel.kallsyms] /home/git/linux/include/linux/seqlock.h:90 [root@sandy ~]# [root@sandy ~]# perf top -U -s dso,symbol,srcline Samples: 1K of event 'cycles', Event count (approx.): 589617389 18.66% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:143 7.83% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:39 6.59% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:38 3.66% [kernel] [k] page_fault /home/git/linux/arch/x86/kernel/entry_64.S:1379 3.25% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:40 3.12% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:37 2.74% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:36 2.39% [kernel] [k] clear_page /home/git/linux/arch/x86/lib/clear_page_64.S:43 2.12% [kernel] [k] ioread32 /home/git/linux/lib/iomap.c:90 1.51% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:144 1.19% [kernel] [k] copy_user_generic_unrolled /home/git/linux/arch/x86/lib/copy_user_64.S:154 Suggested-by: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pdmqbng9twz06jzkbgtuwbp8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 21:33:24 +08:00
DIM(SORT_SRCLINE, "srcline", sort_srcline),
perf report: Add support for srcfile sort key In some cases it's useful to characterize samples by file. This is useful to get a higher level categorization, for example to map cost to subsystems. Add a srcfile sort key to perf report. It builds on top of the existing srcline support. Commiter notes: E.g.: # perf record -F 10000 usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data (13 samples) ] [root@zoo ~]# perf report -s srcfile --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File # ........ ........... 60.99% . 20.62% paravirt.h 14.23% rmap.c 4.04% signal.c 0.11% msr.h # The first line is collecting all the files for which srcfiles couldn't somehow get resolved to: # perf report -s srcfile,dso --stdio # Total Lost Samples: 0 # # Samples: 13 of event 'cycles' # Event count (approx.): 869878 # # Overhead Source File Shared Object # ........ ........... ................ 40.97% . ld-2.20.so 20.62% paravirt.h [kernel.vmlinux] 20.02% . libc-2.20.so 14.23% rmap.c [kernel.vmlinux] 4.04% signal.c [kernel.vmlinux] 0.11% msr.h [kernel.vmlinux] # XXX: Investigate why that is not resolving on Fedora 21, Andi says he hasn't seen this on Fedora 22. Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1438988064-21834-1-git-send-email-andi@firstfloor.org [ Added column length update, from 0e65bdb3f90f ('perf hists: Update the column width for the "srcline" sort key') ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-08 06:54:24 +08:00
DIM(SORT_SRCFILE, "srcfile", sort_srcfile),
DIM(SORT_LOCAL_WEIGHT, "local_weight", sort_local_weight),
DIM(SORT_GLOBAL_WEIGHT, "weight", sort_global_weight),
DIM(SORT_TRANSACTION, "transaction", sort_transaction),
perf tools: Add 'trace' sort key The 'trace' sort key is to show tracepoint event output using either print fmt or plugin. For example sched_switch event (using plugin) will show output like below: # perf record -e sched:sched_switch -a usleep 10 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ] # $ perf report -s trace --stdio ... # Overhead Trace output # ........ ................................................... # 9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120] 9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120] 9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120] 8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120] 5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100] 5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120] 1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120] 1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120] 1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120] 1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120] 1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49] 1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120] Note that the 'trace' sort key works only for tracepoint events. If it's used to other type of events, just "N/A" will be printed. Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:04 +08:00
DIM(SORT_TRACE, "trace", sort_trace),
};
#undef DIM
#define DIM(d, n, func) [d - __SORT_BRANCH_STACK] = { .name = n, .entry = &(func) }
static struct sort_dimension bstack_sort_dimensions[] = {
DIM(SORT_DSO_FROM, "dso_from", sort_dso_from),
DIM(SORT_DSO_TO, "dso_to", sort_dso_to),
DIM(SORT_SYM_FROM, "symbol_from", sort_sym_from),
DIM(SORT_SYM_TO, "symbol_to", sort_sym_to),
DIM(SORT_MISPREDICT, "mispredict", sort_mispredict),
DIM(SORT_IN_TX, "in_tx", sort_in_tx),
DIM(SORT_ABORT, "abort", sort_abort),
DIM(SORT_CYCLES, "cycles", sort_cycles),
};
#undef DIM
#define DIM(d, n, func) [d - __SORT_MEMORY_MODE] = { .name = n, .entry = &(func) }
static struct sort_dimension memory_sort_dimensions[] = {
DIM(SORT_MEM_DADDR_SYMBOL, "symbol_daddr", sort_mem_daddr_sym),
DIM(SORT_MEM_IADDR_SYMBOL, "symbol_iaddr", sort_mem_iaddr_sym),
DIM(SORT_MEM_DADDR_DSO, "dso_daddr", sort_mem_daddr_dso),
DIM(SORT_MEM_LOCKED, "locked", sort_mem_locked),
DIM(SORT_MEM_TLB, "tlb", sort_mem_tlb),
DIM(SORT_MEM_LVL, "mem", sort_mem_lvl),
DIM(SORT_MEM_SNOOP, "snoop", sort_mem_snoop),
perf tools: Add dcacheline sort In perf's 'mem-mode', one can get access to a whole bunch of details specific to a particular sample instruction. A bunch of those details relate to the data address. One interesting thing you can do with data addresses is to convert them into a unique cacheline they belong too. Organizing these data cachelines into similar groups and sorting them can reveal cache contention. This patch creates an alogorithm based on various sample details that can help group entries together into data cachelines and allows 'perf report' to sort on it. The algorithm relies on having proper mmap2 support in the kernel to help determine if the memory map the data address belongs to is private to a pid or globally shared. The alogortithm is as follows: o group cpumodes together o group entries with discovered maps together o sort on major, minor, inode and inode generation numbers o if userspace anon, then sort on pid o sort on cachelines based on data addresses The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'. Sample output: # # Samples: 206 of event 'cpu/mem-loads/pp' # Total weight : 2534 # Sort order : dcacheline,pid # # Overhead Samples Data Cacheline Command: Pid # ........ ............ ...................................................................... .................. # 13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0 9.27% 1 [k] 0xffff88082e8cea80 swapper: 0 3.59% 2 [k] 0xffffffff819ba180 swapper: 0 0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0 0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0 Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column from prematurely tabbing over and mis-aligning. Not sure what the problem is. Signed-off-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-06-01 21:38:29 +08:00
DIM(SORT_MEM_DCACHELINE, "dcacheline", sort_mem_dcacheline),
};
#undef DIM
struct hpp_dimension {
const char *name;
struct perf_hpp_fmt *fmt;
int taken;
};
#define DIM(d, n) { .name = n, .fmt = &perf_hpp__format[d], }
static struct hpp_dimension hpp_sort_dimensions[] = {
DIM(PERF_HPP__OVERHEAD, "overhead"),
DIM(PERF_HPP__OVERHEAD_SYS, "overhead_sys"),
DIM(PERF_HPP__OVERHEAD_US, "overhead_us"),
DIM(PERF_HPP__OVERHEAD_GUEST_SYS, "overhead_guest_sys"),
DIM(PERF_HPP__OVERHEAD_GUEST_US, "overhead_guest_us"),
DIM(PERF_HPP__OVERHEAD_ACC, "overhead_children"),
DIM(PERF_HPP__SAMPLES, "sample"),
DIM(PERF_HPP__PERIOD, "period"),
};
#undef DIM
struct hpp_sort_entry {
struct perf_hpp_fmt hpp;
struct sort_entry *se;
};
void perf_hpp__reset_sort_width(struct perf_hpp_fmt *fmt, struct hists *hists)
{
struct hpp_sort_entry *hse;
if (!perf_hpp__is_sort_entry(fmt))
return;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
hists__new_col_len(hists, hse->se->se_width_idx, strlen(fmt->name));
}
static int __sort__hpp_header(struct perf_hpp_fmt *fmt, struct perf_hpp *hpp,
struct perf_evsel *evsel)
{
struct hpp_sort_entry *hse;
size_t len = fmt->user_len;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
if (!len)
len = hists__col_len(evsel__hists(evsel), hse->se->se_width_idx);
return scnprintf(hpp->buf, hpp->size, "%-*.*s", len, len, fmt->name);
}
static int __sort__hpp_width(struct perf_hpp_fmt *fmt,
struct perf_hpp *hpp __maybe_unused,
struct perf_evsel *evsel)
{
struct hpp_sort_entry *hse;
size_t len = fmt->user_len;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
if (!len)
len = hists__col_len(evsel__hists(evsel), hse->se->se_width_idx);
return len;
}
static int __sort__hpp_entry(struct perf_hpp_fmt *fmt, struct perf_hpp *hpp,
struct hist_entry *he)
{
struct hpp_sort_entry *hse;
size_t len = fmt->user_len;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
if (!len)
len = hists__col_len(he->hists, hse->se->se_width_idx);
return hse->se->se_snprintf(he, hpp->buf, hpp->size, len);
}
static int64_t __sort__hpp_cmp(struct perf_hpp_fmt *fmt,
struct hist_entry *a, struct hist_entry *b)
{
struct hpp_sort_entry *hse;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
return hse->se->se_cmp(a, b);
}
static int64_t __sort__hpp_collapse(struct perf_hpp_fmt *fmt,
struct hist_entry *a, struct hist_entry *b)
{
struct hpp_sort_entry *hse;
int64_t (*collapse_fn)(struct hist_entry *, struct hist_entry *);
hse = container_of(fmt, struct hpp_sort_entry, hpp);
collapse_fn = hse->se->se_collapse ?: hse->se->se_cmp;
return collapse_fn(a, b);
}
static int64_t __sort__hpp_sort(struct perf_hpp_fmt *fmt,
struct hist_entry *a, struct hist_entry *b)
{
struct hpp_sort_entry *hse;
int64_t (*sort_fn)(struct hist_entry *, struct hist_entry *);
hse = container_of(fmt, struct hpp_sort_entry, hpp);
sort_fn = hse->se->se_sort ?: hse->se->se_cmp;
return sort_fn(a, b);
}
bool perf_hpp__is_sort_entry(struct perf_hpp_fmt *format)
{
return format->header == __sort__hpp_header;
}
static bool __sort__hpp_equal(struct perf_hpp_fmt *a, struct perf_hpp_fmt *b)
{
struct hpp_sort_entry *hse_a;
struct hpp_sort_entry *hse_b;
if (!perf_hpp__is_sort_entry(a) || !perf_hpp__is_sort_entry(b))
return false;
hse_a = container_of(a, struct hpp_sort_entry, hpp);
hse_b = container_of(b, struct hpp_sort_entry, hpp);
return hse_a->se == hse_b->se;
}
static void hse_free(struct perf_hpp_fmt *fmt)
{
struct hpp_sort_entry *hse;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
free(hse);
}
static struct hpp_sort_entry *
__sort_dimension__alloc_hpp(struct sort_dimension *sd)
{
struct hpp_sort_entry *hse;
hse = malloc(sizeof(*hse));
if (hse == NULL) {
pr_err("Memory allocation failed\n");
return NULL;
}
hse->se = sd->entry;
hse->hpp.name = sd->entry->se_header;
hse->hpp.header = __sort__hpp_header;
hse->hpp.width = __sort__hpp_width;
hse->hpp.entry = __sort__hpp_entry;
hse->hpp.color = NULL;
hse->hpp.cmp = __sort__hpp_cmp;
hse->hpp.collapse = __sort__hpp_collapse;
hse->hpp.sort = __sort__hpp_sort;
hse->hpp.equal = __sort__hpp_equal;
hse->hpp.free = hse_free;
INIT_LIST_HEAD(&hse->hpp.list);
INIT_LIST_HEAD(&hse->hpp.sort_list);
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
hse->hpp.elide = false;
hse->hpp.len = 0;
hse->hpp.user_len = 0;
return hse;
}
static void hpp_free(struct perf_hpp_fmt *fmt)
{
free(fmt);
}
static struct perf_hpp_fmt *__hpp_dimension__alloc_hpp(struct hpp_dimension *hd)
{
struct perf_hpp_fmt *fmt;
fmt = memdup(hd->fmt, sizeof(*fmt));
if (fmt) {
INIT_LIST_HEAD(&fmt->list);
INIT_LIST_HEAD(&fmt->sort_list);
fmt->free = hpp_free;
}
return fmt;
}
static int __sort_dimension__add_hpp_sort(struct sort_dimension *sd)
{
struct hpp_sort_entry *hse = __sort_dimension__alloc_hpp(sd);
if (hse == NULL)
return -1;
perf_hpp__register_sort_field(&hse->hpp);
return 0;
}
static int __sort_dimension__add_hpp_output(struct perf_hpp_list *list,
struct sort_dimension *sd)
{
struct hpp_sort_entry *hse = __sort_dimension__alloc_hpp(sd);
if (hse == NULL)
return -1;
perf_hpp_list__column_register(list, &hse->hpp);
return 0;
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
struct hpp_dynamic_entry {
struct perf_hpp_fmt hpp;
struct perf_evsel *evsel;
struct format_field *field;
unsigned dynamic_len;
bool raw_trace;
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
};
static int hde_width(struct hpp_dynamic_entry *hde)
{
if (!hde->hpp.len) {
int len = hde->dynamic_len;
int namelen = strlen(hde->field->name);
int fieldlen = hde->field->size;
if (namelen > len)
len = namelen;
if (!(hde->field->flags & FIELD_IS_STRING)) {
/* length for print hex numbers */
fieldlen = hde->field->size * 2 + 2;
}
if (fieldlen > len)
len = fieldlen;
hde->hpp.len = len;
}
return hde->hpp.len;
}
static void update_dynamic_len(struct hpp_dynamic_entry *hde,
struct hist_entry *he)
{
char *str, *pos;
struct format_field *field = hde->field;
size_t namelen;
bool last = false;
if (hde->raw_trace)
return;
/* parse pretty print result and update max length */
if (!he->trace_output)
he->trace_output = get_trace_output(he);
namelen = strlen(field->name);
str = he->trace_output;
while (str) {
pos = strchr(str, ' ');
if (pos == NULL) {
last = true;
pos = str + strlen(str);
}
if (!strncmp(str, field->name, namelen)) {
size_t len;
str += namelen + 1;
len = pos - str;
if (len > hde->dynamic_len)
hde->dynamic_len = len;
break;
}
if (last)
str = NULL;
else
str = pos + 1;
}
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
static int __sort__hde_header(struct perf_hpp_fmt *fmt, struct perf_hpp *hpp,
struct perf_evsel *evsel __maybe_unused)
{
struct hpp_dynamic_entry *hde;
size_t len = fmt->user_len;
hde = container_of(fmt, struct hpp_dynamic_entry, hpp);
if (!len)
len = hde_width(hde);
return scnprintf(hpp->buf, hpp->size, "%*.*s", len, len, hde->field->name);
}
static int __sort__hde_width(struct perf_hpp_fmt *fmt,
struct perf_hpp *hpp __maybe_unused,
struct perf_evsel *evsel __maybe_unused)
{
struct hpp_dynamic_entry *hde;
size_t len = fmt->user_len;
hde = container_of(fmt, struct hpp_dynamic_entry, hpp);
if (!len)
len = hde_width(hde);
return len;
}
perf tools: Skip dynamic fields not defined for current event When there are multiple events, each dynamic sort key is defined just for one event. In this case other events will always show "N/A" for those fields. But they are meaningless and consume precious screen width. Let's skip those undefined dynamic fields. $ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1 $ perf report -s 'comm,kmalloc.*' --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 20K of event 'kmem:kmalloc' # Event count (approx.): 20533 # # Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags # ........ ....... .................. .................. ......... ........... ................... # 99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO 0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL 0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO 0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL 0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL 0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL 0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL # Samples: 20K of event 'kmem:kfree' # Event count (approx.): 20597 # # Overhead Command # ........ .............. # 99.63% perf 0.14% sleep 0.11% irq/36-iwlwifi 0.11% kworker/u16:0 0.01% Xorg 0.00% firefox Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:08 +08:00
bool perf_hpp__defined_dynamic_entry(struct perf_hpp_fmt *fmt, struct hists *hists)
{
struct hpp_dynamic_entry *hde;
hde = container_of(fmt, struct hpp_dynamic_entry, hpp);
return hists_to_evsel(hists) == hde->evsel;
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
static int __sort__hde_entry(struct perf_hpp_fmt *fmt, struct perf_hpp *hpp,
struct hist_entry *he)
{
struct hpp_dynamic_entry *hde;
size_t len = fmt->user_len;
char *str, *pos;
struct format_field *field;
size_t namelen;
bool last = false;
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
int ret;
hde = container_of(fmt, struct hpp_dynamic_entry, hpp);
if (!len)
len = hde_width(hde);
if (hde->raw_trace)
goto raw_field;
field = hde->field;
namelen = strlen(field->name);
str = he->trace_output;
while (str) {
pos = strchr(str, ' ');
if (pos == NULL) {
last = true;
pos = str + strlen(str);
}
if (!strncmp(str, field->name, namelen)) {
str += namelen + 1;
str = strndup(str, pos - str);
if (str == NULL)
return scnprintf(hpp->buf, hpp->size,
"%*.*s", len, len, "ERROR");
break;
}
if (last)
str = NULL;
else
str = pos + 1;
}
if (str == NULL) {
struct trace_seq seq;
raw_field:
trace_seq_init(&seq);
pevent_print_field(&seq, he->raw_data, hde->field);
str = seq.buffer;
}
ret = scnprintf(hpp->buf, hpp->size, "%*.*s", len, len, str);
free(str);
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
return ret;
}
static int64_t __sort__hde_cmp(struct perf_hpp_fmt *fmt,
struct hist_entry *a, struct hist_entry *b)
{
struct hpp_dynamic_entry *hde;
struct format_field *field;
unsigned offset, size;
hde = container_of(fmt, struct hpp_dynamic_entry, hpp);
field = hde->field;
if (field->flags & FIELD_IS_DYNAMIC) {
unsigned long long dyn;
pevent_read_number_field(field, a->raw_data, &dyn);
offset = dyn & 0xffff;
size = (dyn >> 16) & 0xffff;
/* record max width for output */
if (size > hde->dynamic_len)
hde->dynamic_len = size;
} else {
offset = field->offset;
size = field->size;
update_dynamic_len(hde, a);
update_dynamic_len(hde, b);
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
}
return memcmp(a->raw_data + offset, b->raw_data + offset, size);
}
perf tools: Skip dynamic fields not defined for current event When there are multiple events, each dynamic sort key is defined just for one event. In this case other events will always show "N/A" for those fields. But they are meaningless and consume precious screen width. Let's skip those undefined dynamic fields. $ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1 $ perf report -s 'comm,kmalloc.*' --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 20K of event 'kmem:kmalloc' # Event count (approx.): 20533 # # Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags # ........ ....... .................. .................. ......... ........... ................... # 99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO 0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL 0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO 0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL 0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL 0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL 0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL # Samples: 20K of event 'kmem:kfree' # Event count (approx.): 20597 # # Overhead Command # ........ .............. # 99.63% perf 0.14% sleep 0.11% irq/36-iwlwifi 0.11% kworker/u16:0 0.01% Xorg 0.00% firefox Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:08 +08:00
bool perf_hpp__is_dynamic_entry(struct perf_hpp_fmt *fmt)
{
return fmt->cmp == __sort__hde_cmp;
}
static bool __sort__hde_equal(struct perf_hpp_fmt *a, struct perf_hpp_fmt *b)
{
struct hpp_dynamic_entry *hde_a;
struct hpp_dynamic_entry *hde_b;
if (!perf_hpp__is_dynamic_entry(a) || !perf_hpp__is_dynamic_entry(b))
return false;
hde_a = container_of(a, struct hpp_dynamic_entry, hpp);
hde_b = container_of(b, struct hpp_dynamic_entry, hpp);
return hde_a->field == hde_b->field;
}
static void hde_free(struct perf_hpp_fmt *fmt)
{
struct hpp_dynamic_entry *hde;
hde = container_of(fmt, struct hpp_dynamic_entry, hpp);
free(hde);
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
static struct hpp_dynamic_entry *
__alloc_dynamic_entry(struct perf_evsel *evsel, struct format_field *field)
{
struct hpp_dynamic_entry *hde;
hde = malloc(sizeof(*hde));
if (hde == NULL) {
pr_debug("Memory allocation failed\n");
return NULL;
}
hde->evsel = evsel;
hde->field = field;
hde->dynamic_len = 0;
hde->hpp.name = field->name;
hde->hpp.header = __sort__hde_header;
hde->hpp.width = __sort__hde_width;
hde->hpp.entry = __sort__hde_entry;
hde->hpp.color = NULL;
hde->hpp.cmp = __sort__hde_cmp;
hde->hpp.collapse = __sort__hde_cmp;
hde->hpp.sort = __sort__hde_cmp;
hde->hpp.equal = __sort__hde_equal;
hde->hpp.free = hde_free;
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
INIT_LIST_HEAD(&hde->hpp.list);
INIT_LIST_HEAD(&hde->hpp.sort_list);
hde->hpp.elide = false;
hde->hpp.len = 0;
hde->hpp.user_len = 0;
return hde;
}
static int parse_field_name(char *str, char **event, char **field, char **opt)
{
char *event_name, *field_name, *opt_name;
event_name = str;
field_name = strchr(str, '.');
if (field_name) {
*field_name++ = '\0';
} else {
event_name = NULL;
field_name = str;
}
opt_name = strchr(field_name, '/');
if (opt_name)
*opt_name++ = '\0';
*event = event_name;
*field = field_name;
*opt = opt_name;
return 0;
}
/* find match evsel using a given event name. The event name can be:
* 1. '%' + event index (e.g. '%1' for first event)
* 2. full event name (e.g. sched:sched_switch)
* 3. partial event name (should not contain ':')
*/
static struct perf_evsel *find_evsel(struct perf_evlist *evlist, char *event_name)
{
struct perf_evsel *evsel = NULL;
struct perf_evsel *pos;
bool full_name;
/* case 1 */
if (event_name[0] == '%') {
int nr = strtol(event_name+1, NULL, 0);
if (nr > evlist->nr_entries)
return NULL;
evsel = perf_evlist__first(evlist);
while (--nr > 0)
evsel = perf_evsel__next(evsel);
return evsel;
}
full_name = !!strchr(event_name, ':');
evlist__for_each(evlist, pos) {
/* case 2 */
if (full_name && !strcmp(pos->name, event_name))
return pos;
/* case 3 */
if (!full_name && strstr(pos->name, event_name)) {
if (evsel) {
pr_debug("'%s' event is ambiguous: it can be %s or %s\n",
event_name, evsel->name, pos->name);
return NULL;
}
evsel = pos;
}
}
return evsel;
}
static int __dynamic_dimension__add(struct perf_evsel *evsel,
struct format_field *field,
bool raw_trace)
{
struct hpp_dynamic_entry *hde;
hde = __alloc_dynamic_entry(evsel, field);
if (hde == NULL)
return -ENOMEM;
hde->raw_trace = raw_trace;
perf_hpp__register_sort_field(&hde->hpp);
return 0;
}
perf tools: Add 'trace_fields' dynamic sort key The 'trace_fields' sort key is similar as 'trace' sort key, but it shows each fields separately. Each event will get different columns as their fields. $ perf report -s trace_fields --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 20K of event 'kmem:kmalloc' # Event count (approx.): 20533 # # Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags # ........ ....... .................. .................. ......... ........... ................... # 99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO 0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL 0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO 0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL 0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL 0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL 0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL # Samples: 20K of event 'kmem:kfree' # Event count (approx.): 20597 # # Overhead call_site ptr # ........ .................. .................. # 99.58% ffffffffa01d85ad 0xffff8803ffb79720 0.07% ffffffff81443f5c 0xffff8803f7669400 0.02% ffffffff811d5753 0xffff8803f7678f00 0.01% ffffffff81443f5c 0xffff8803f766be00 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff81443f5c 0xffff8800d156dc00 0.01% ffffffff81443f5c 0xffff8803f7669400 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff8114e359 0xffff8803d228a000 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-13-git-send-email-namhyung@kernel.org [ Combined with "perf tools: Fix segfault when using -s trace_fields" ] Link: http://lkml.kernel.org/r/1451991518-25673-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:09 +08:00
static int add_evsel_fields(struct perf_evsel *evsel, bool raw_trace)
{
int ret;
struct format_field *field;
field = evsel->tp_format->format.fields;
while (field) {
ret = __dynamic_dimension__add(evsel, field, raw_trace);
if (ret < 0)
return ret;
field = field->next;
}
return 0;
}
static int add_all_dynamic_fields(struct perf_evlist *evlist, bool raw_trace)
{
int ret;
struct perf_evsel *evsel;
evlist__for_each(evlist, evsel) {
if (evsel->attr.type != PERF_TYPE_TRACEPOINT)
continue;
ret = add_evsel_fields(evsel, raw_trace);
if (ret < 0)
return ret;
}
return 0;
}
static int add_all_matching_fields(struct perf_evlist *evlist,
char *field_name, bool raw_trace)
{
int ret = -ESRCH;
struct perf_evsel *evsel;
struct format_field *field;
evlist__for_each(evlist, evsel) {
if (evsel->attr.type != PERF_TYPE_TRACEPOINT)
continue;
field = pevent_find_any_field(evsel->tp_format, field_name);
if (field == NULL)
continue;
ret = __dynamic_dimension__add(evsel, field, raw_trace);
if (ret < 0)
break;
}
return ret;
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
static int add_dynamic_entry(struct perf_evlist *evlist, const char *tok)
{
char *str, *event_name, *field_name, *opt_name;
struct perf_evsel *evsel;
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
struct format_field *field;
bool raw_trace = symbol_conf.raw_trace;
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
int ret = 0;
if (evlist == NULL)
return -ENOENT;
str = strdup(tok);
if (str == NULL)
return -ENOMEM;
if (parse_field_name(str, &event_name, &field_name, &opt_name) < 0) {
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
ret = -EINVAL;
goto out;
}
if (opt_name) {
if (strcmp(opt_name, "raw")) {
pr_debug("unsupported field option %s\n", opt_name);
ret = -EINVAL;
goto out;
}
raw_trace = true;
}
perf tools: Add 'trace_fields' dynamic sort key The 'trace_fields' sort key is similar as 'trace' sort key, but it shows each fields separately. Each event will get different columns as their fields. $ perf report -s trace_fields --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 20K of event 'kmem:kmalloc' # Event count (approx.): 20533 # # Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags # ........ ....... .................. .................. ......... ........... ................... # 99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO 0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL 0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO 0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL 0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL 0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL 0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL # Samples: 20K of event 'kmem:kfree' # Event count (approx.): 20597 # # Overhead call_site ptr # ........ .................. .................. # 99.58% ffffffffa01d85ad 0xffff8803ffb79720 0.07% ffffffff81443f5c 0xffff8803f7669400 0.02% ffffffff811d5753 0xffff8803f7678f00 0.01% ffffffff81443f5c 0xffff8803f766be00 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff81443f5c 0xffff8800d156dc00 0.01% ffffffff81443f5c 0xffff8803f7669400 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff8114e359 0xffff8803d228a000 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-13-git-send-email-namhyung@kernel.org [ Combined with "perf tools: Fix segfault when using -s trace_fields" ] Link: http://lkml.kernel.org/r/1451991518-25673-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:09 +08:00
if (!strcmp(field_name, "trace_fields")) {
ret = add_all_dynamic_fields(evlist, raw_trace);
goto out;
}
if (event_name == NULL) {
ret = add_all_matching_fields(evlist, field_name, raw_trace);
goto out;
}
evsel = find_evsel(evlist, event_name);
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
if (evsel == NULL) {
pr_debug("Cannot find event: %s\n", event_name);
ret = -ENOENT;
goto out;
}
if (evsel->attr.type != PERF_TYPE_TRACEPOINT) {
pr_debug("%s is not a tracepoint event\n", event_name);
ret = -EINVAL;
goto out;
}
if (!strcmp(field_name, "*")) {
perf tools: Add 'trace_fields' dynamic sort key The 'trace_fields' sort key is similar as 'trace' sort key, but it shows each fields separately. Each event will get different columns as their fields. $ perf report -s trace_fields --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 20K of event 'kmem:kmalloc' # Event count (approx.): 20533 # # Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags # ........ ....... .................. .................. ......... ........... ................... # 99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO 0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL 0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO 0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL 0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL 0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL 0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL # Samples: 20K of event 'kmem:kfree' # Event count (approx.): 20597 # # Overhead call_site ptr # ........ .................. .................. # 99.58% ffffffffa01d85ad 0xffff8803ffb79720 0.07% ffffffff81443f5c 0xffff8803f7669400 0.02% ffffffff811d5753 0xffff8803f7678f00 0.01% ffffffff81443f5c 0xffff8803f766be00 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff81443f5c 0xffff8800d156dc00 0.01% ffffffff81443f5c 0xffff8803f7669400 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff8114e359 0xffff8803d228a000 0.01% ffffffff8114e359 0xffff8803d228a000 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-13-git-send-email-namhyung@kernel.org [ Combined with "perf tools: Fix segfault when using -s trace_fields" ] Link: http://lkml.kernel.org/r/1451991518-25673-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:09 +08:00
ret = add_evsel_fields(evsel, raw_trace);
} else {
field = pevent_find_any_field(evsel->tp_format, field_name);
if (field == NULL) {
pr_debug("Cannot find event field for %s.%s\n",
event_name, field_name);
return -ENOENT;
}
ret = __dynamic_dimension__add(evsel, field, raw_trace);
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
out:
free(str);
return ret;
}
static int __sort_dimension__add(struct sort_dimension *sd)
{
if (sd->taken)
return 0;
if (__sort_dimension__add_hpp_sort(sd) < 0)
return -1;
if (sd->entry->se_collapse)
sort__need_collapse = 1;
sd->taken = 1;
return 0;
}
static int __hpp_dimension__add(struct hpp_dimension *hd)
{
struct perf_hpp_fmt *fmt;
if (hd->taken)
return 0;
fmt = __hpp_dimension__alloc_hpp(hd);
if (!fmt)
return -1;
hd->taken = 1;
perf_hpp__register_sort_field(fmt);
return 0;
}
static int __sort_dimension__add_output(struct perf_hpp_list *list,
struct sort_dimension *sd)
{
if (sd->taken)
return 0;
if (__sort_dimension__add_hpp_output(list, sd) < 0)
return -1;
sd->taken = 1;
return 0;
}
static int __hpp_dimension__add_output(struct perf_hpp_list *list,
struct hpp_dimension *hd)
{
struct perf_hpp_fmt *fmt;
if (hd->taken)
return 0;
fmt = __hpp_dimension__alloc_hpp(hd);
if (!fmt)
return -1;
hd->taken = 1;
perf_hpp_list__column_register(list, fmt);
return 0;
}
int hpp_dimension__add_output(unsigned col)
{
BUG_ON(col >= PERF_HPP__MAX_INDEX);
return __hpp_dimension__add_output(&perf_hpp_list, &hpp_sort_dimensions[col]);
}
static int sort_dimension__add(const char *tok,
struct perf_evlist *evlist __maybe_unused)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(common_sort_dimensions); i++) {
struct sort_dimension *sd = &common_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
if (sd->entry == &sort_parent) {
int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED);
if (ret) {
char err[BUFSIZ];
regerror(ret, &parent_regex, err, sizeof(err));
pr_err("Invalid regex: %s\n%s", parent_pattern, err);
return -EINVAL;
}
sort__has_parent = 1;
} else if (sd->entry == &sort_sym) {
sort__has_sym = 1;
perf diff: Support for different binaries Currently, the perf diff only works with same binaries. That's because it compares the symbol start address. It doesn't work if the perf.data comes from different binaries. This patch matches the symbol names. Actually, perf diff once intended to compare the symbol names. The commit as below can look for a pair by name. 604c5c92972d (perf diff: Change the default sort order to "dso,symbol") However, at that time, perf diff used a global list of dsos. That means the binaries which has same name can only be loaded once. That's a problem for comparing different binaries. For example, we have an old binary and an updated binary. They very likely have same name and most of the functions, so only dsos from old binary will be loaded. When processing the data from updated binary, perf still use the symbol information from old binary. That's wrong. Then the commit as below used IP to replace symbol name. 9c443dfdd31e ("perf diff: Fix support for all --sort combinations") >From that time, perf diff starts to compare the symbol address. The global dsos is discarded from a patch in 2010. a1645ce12adb ("perf: 'perf kvm' tool for monitoring guest performance from host") However, at that time, perf diff already compared by address. So perf diff cannot work for different binaries as well. This patch actually rolls back the perf diff to original design. The document is also changed, so everybody knows the original design is to compare the symbol names. Here are some examples: The only difference between example_v1.c and example_v2.c is the location of f2 and f3. There is no change in behavior, but the previous perf diff display the wrong differential profile. example_v1.c noinline void f3(void) { volatile int i; for (i = 0; i < 10000;) { if(i%2) i++; else i++; } } noinline void f2(void) { volatile int a = 100, b, c; for (b = 0; b < 10000; b++) c = a * b; } noinline void f1(void) { f2(); f3(); } int main() { int i; for (i = 0; i < 100000; i++) f1(); } example_v2.c noinline void f2(void) { volatile int a = 100, b, c; for (b = 0; b < 10000; b++) c = a * b; } noinline void f3(void) { volatile int i; for (i = 0; i < 10000;) { if(i%2) i++; else i++; } } noinline void f1(void) { f2(); f3(); } int main() { int i; for (i = 0; i < 100000; i++) f1(); } [lk@localhost perf_diff]$ gcc example_v1.c -o example [lk@localhost perf_diff]$ perf record -o example_v1.data ./example [ perf record: Woken up 4 times to write data ] [ perf record: Captured and wrote 0.813 MB example_v1.data (~35522 samples) ] [lk@localhost perf_diff]$ gcc example_v2.c -o example [lk@localhost perf_diff]$ perf record -o example_v2.data ./example [ perf record: Woken up 4 times to write data ] [ perf record: Captured and wrote 0.824 MB example_v2.data (~36015 samples) ] Old perf diff result: [lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data Event 'cycles' Baseline Delta Shared Object Symbol ........ ....... ................ ............................... [kernel.vmlinux] [k] __perf_event_task_sched_out 0.00% [kernel.vmlinux] [k] apic_timer_interrupt [kernel.vmlinux] [k] idle_cpu [kernel.vmlinux] [k] intel_pstate_timer_func [kernel.vmlinux] [k] native_read_msr_safe 0.00% [kernel.vmlinux] [k] native_read_tsc 0.00% [kernel.vmlinux] [k] native_write_msr_safe [kernel.vmlinux] [k] ntp_tick_length 0.00% [kernel.vmlinux] [k] rb_erase 0.00% [kernel.vmlinux] [k] tick_sched_timer 0.00% [kernel.vmlinux] [k] unmap_single_vma 0.00% [kernel.vmlinux] [k] update_wall_time 0.00% example [.] f1 46.24% example [.] f2 53.71% -7.55% example [.] f3 +53.81% example [.] f3 0.02% example [.] main New perf diff result: [lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data [kernel.vmlinux] [k] __perf_event_task_sched_out 0.00% [kernel.vmlinux] [k] apic_timer_interrupt [kernel.vmlinux] [k] idle_cpu [kernel.vmlinux] [k] intel_pstate_timer_func [kernel.vmlinux] [k] native_read_msr_safe 0.00% [kernel.vmlinux] [k] native_read_tsc 0.00% [kernel.vmlinux] [k] native_write_msr_safe [kernel.vmlinux] [k] ntp_tick_length 0.00% [kernel.vmlinux] [k] rb_erase 0.00% [kernel.vmlinux] [k] tick_sched_timer 0.00% [kernel.vmlinux] [k] unmap_single_vma 0.00% [kernel.vmlinux] [k] update_wall_time 0.00% example [.] f1 46.24% -0.08% example [.] f2 53.71% +0.11% example [.] f3 0.02% example [.] main Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1423460384-11645-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-09 13:39:44 +08:00
/*
* perf diff displays the performance difference amongst
* two or more perf.data files. Those files could come
* from different binaries. So we should not compare
* their ips, but the name of symbol.
*/
if (sort__mode == SORT_MODE__DIFF)
sd->entry->se_collapse = sort__sym_sort;
} else if (sd->entry == &sort_dso) {
sort__has_dso = 1;
} else if (sd->entry == &sort_socket) {
sort__has_socket = 1;
} else if (sd->entry == &sort_thread) {
sort__has_thread = 1;
}
return __sort_dimension__add(sd);
}
for (i = 0; i < ARRAY_SIZE(hpp_sort_dimensions); i++) {
struct hpp_dimension *hd = &hpp_sort_dimensions[i];
if (strncasecmp(tok, hd->name, strlen(tok)))
continue;
return __hpp_dimension__add(hd);
}
for (i = 0; i < ARRAY_SIZE(bstack_sort_dimensions); i++) {
struct sort_dimension *sd = &bstack_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
if (sort__mode != SORT_MODE__BRANCH)
return -EINVAL;
if (sd->entry == &sort_sym_from || sd->entry == &sort_sym_to)
sort__has_sym = 1;
__sort_dimension__add(sd);
return 0;
}
for (i = 0; i < ARRAY_SIZE(memory_sort_dimensions); i++) {
struct sort_dimension *sd = &memory_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
if (sort__mode != SORT_MODE__MEMORY)
return -EINVAL;
if (sd->entry == &sort_mem_daddr_sym)
sort__has_sym = 1;
__sort_dimension__add(sd);
return 0;
}
perf tools: Add dynamic sort key for tracepoint events The existing sort keys are less useful for tracepoint events in that they are always sampled at the same place, the function where the tracepoint is located. For example, a 'perf report' on sched:sched_switch event looks like the following: # Overhead Command Shared Object Symbol # ........ ............... ................ .............. # 47.22% swapper [kernel.vmlinux] [k] __schedule 21.67% transmission-gt [kernel.vmlinux] [k] __schedule 8.23% netctl-auto [kernel.vmlinux] [k] __schedule 5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule 1.98% Xephyr [kernel.vmlinux] [k] __schedule 1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule 1.17% wpa_cli [kernel.vmlinux] [k] __schedule 1.13% rcu_preempt [kernel.vmlinux] [k] __schedule 0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule 0.77% Timer [kernel.vmlinux] [k] __schedule In fact, tracepoints have meaningful information in their fields but there's no way to use in 'perf report' currently. The dynamic sort keys are introduced in this patc to overcome this limitation. The sched:sched_switch events have following fields: # sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 268 format: field:unsigned short common_type; offset:0; size:2; signed:0; field:unsigned char common_flags; offset:2; size:1; signed:0; field:unsigned char common_preempt_count; offset:3; size:1; signed:0; field:int common_pid; offset:4; size:4; signed:1; field:char prev_comm[16]; offset:8; size:16; signed:1; field:pid_t prev_pid; offset:24; size:4; signed:1; field:int prev_prio; offset:28; size:4; signed:1; field:long prev_state; offset:32; size:8; signed:1; field:char next_comm[16]; offset:40; size:16; signed:1; field:pid_t next_pid; offset:56; size:4; signed:1; field:int next_prio; offset:60; size:4; signed:1; print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==> next_comm=%s next_pid=%d next_prio=%d", REC->prev_comm, REC->prev_pid, REC->prev_prio, REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1), "|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" }, { 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R", REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio With dynamic sort keys, you can use <event.field> as a sort key. Those dynamic keys are checked and created on demand. For instance, below is to sort by next_pid field output on the same data file: $ perf report -s comm,sched:sched_switch.next_pid --stdio ... # Overhead Command next_pid # ........ ............... .......... # 21.23% transmission-gt 0 20.86% swapper 17773 6.62% netctl-auto 0 5.25% swapper 109 5.21% kworker/0:1H 0 1.98% Xephyr 0 1.98% swapper 6524 1.98% swapper 27478 1.37% swapper 27476 1.17% swapper 233 Multiple dynamic sort keys are also supported: $ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio ... # Overhead Command next_pid next_comm # ........ ............... .......... ................ # 20.86% swapper 17773 transmission-gt 9.64% transmission-gt 0 swapper/0 9.16% transmission-gt 0 swapper/2 5.25% swapper 109 kworker/0:1H 5.21% kworker/0:1H 0 swapper/0 2.14% netctl-auto 0 swapper/2 1.98% netctl-auto 0 swapper/0 1.98% swapper 6524 Xephyr 1.98% swapper 27478 netctl-auto 1.78% transmission-gt 0 swapper/3 1.53% Xephyr 0 swapper/0 1.29% netctl-auto 0 swapper/1 1.29% swapper 27476 netctl-auto 1.21% netctl-auto 0 swapper/3 1.17% swapper 233 irq/33-iwlwifi Note that pid 0 exists for each cpu so have comm of 'swapper/N'. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-23 01:07:02 +08:00
if (!add_dynamic_entry(evlist, tok))
return 0;
return -ESRCH;
}
static int setup_sort_list(char *str, struct perf_evlist *evlist)
{
char *tmp, *tok;
int ret = 0;
for (tok = strtok_r(str, ", ", &tmp);
tok; tok = strtok_r(NULL, ", ", &tmp)) {
ret = sort_dimension__add(tok, evlist);
if (ret == -EINVAL) {
error("Invalid --sort key: `%s'", tok);
break;
} else if (ret == -ESRCH) {
error("Unknown --sort key: `%s'", tok);
break;
}
}
return ret;
}
static const char *get_default_sort_order(struct perf_evlist *evlist)
{
const char *default_sort_orders[] = {
default_sort_order,
default_branch_sort_order,
default_mem_sort_order,
default_top_sort_order,
default_diff_sort_order,
default_tracepoint_sort_order,
};
bool use_trace = true;
struct perf_evsel *evsel;
BUG_ON(sort__mode >= ARRAY_SIZE(default_sort_orders));
if (evlist == NULL)
goto out_no_evlist;
evlist__for_each(evlist, evsel) {
if (evsel->attr.type != PERF_TYPE_TRACEPOINT) {
use_trace = false;
break;
}
}
if (use_trace) {
sort__mode = SORT_MODE__TRACEPOINT;
if (symbol_conf.raw_trace)
return "trace_fields";
}
out_no_evlist:
return default_sort_orders[sort__mode];
}
static int setup_sort_order(struct perf_evlist *evlist)
perf tools: Add +field argument support for --sort option Adding support to add field(s) to default sort order via using the '+' prefix, like for report: $ perf report Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol 7.39% swapper [kernel.kallsyms] [k] intel_idle 1.97% firefox libpthread-2.17.so [.] pthread_mutex_lock 1.39% firefox [snd_hda_intel] [k] azx_get_position 1.11% firefox libpthread-2.17.so [.] pthread_mutex_unlock $ perf report -s +cpu Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol CPU 2.89% swapper [kernel.kallsyms] [k] intel_idle 000 2.61% swapper [kernel.kallsyms] [k] intel_idle 002 1.20% swapper [kernel.kallsyms] [k] intel_idle 001 0.82% firefox libpthread-2.17.so [.] pthread_mutex_lock 002 Works in general for commands using --sort option. v2 with changes suggested: - Use dynamic memory instead static buffer - Fix error message typo Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140823125948.GA1193@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-23 20:59:48 +08:00
{
char *new_sort_order;
/*
* Append '+'-prefixed sort order to the default sort
* order string.
*/
if (!sort_order || is_strict_order(sort_order))
return 0;
if (sort_order[1] == '\0') {
error("Invalid --sort key: `+'");
return -EINVAL;
}
/*
* We allocate new sort_order string, but we never free it,
* because it's checked over the rest of the code.
*/
if (asprintf(&new_sort_order, "%s,%s",
get_default_sort_order(evlist), sort_order + 1) < 0) {
perf tools: Add +field argument support for --sort option Adding support to add field(s) to default sort order via using the '+' prefix, like for report: $ perf report Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol 7.39% swapper [kernel.kallsyms] [k] intel_idle 1.97% firefox libpthread-2.17.so [.] pthread_mutex_lock 1.39% firefox [snd_hda_intel] [k] azx_get_position 1.11% firefox libpthread-2.17.so [.] pthread_mutex_unlock $ perf report -s +cpu Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol CPU 2.89% swapper [kernel.kallsyms] [k] intel_idle 000 2.61% swapper [kernel.kallsyms] [k] intel_idle 002 1.20% swapper [kernel.kallsyms] [k] intel_idle 001 0.82% firefox libpthread-2.17.so [.] pthread_mutex_lock 002 Works in general for commands using --sort option. v2 with changes suggested: - Use dynamic memory instead static buffer - Fix error message typo Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140823125948.GA1193@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-23 20:59:48 +08:00
error("Not enough memory to set up --sort");
return -ENOMEM;
}
sort_order = new_sort_order;
return 0;
}
/*
* Adds 'pre,' prefix into 'str' is 'pre' is
* not already part of 'str'.
*/
static char *prefix_if_not_in(const char *pre, char *str)
{
char *n;
if (!str || strstr(str, pre))
return str;
if (asprintf(&n, "%s,%s", pre, str) < 0)
return NULL;
free(str);
return n;
}
static char *setup_overhead(char *keys)
{
keys = prefix_if_not_in("overhead", keys);
if (symbol_conf.cumulate_callchain)
keys = prefix_if_not_in("overhead_children", keys);
return keys;
}
static int __setup_sorting(struct perf_evlist *evlist)
{
char *str;
perf tools: Add +field argument support for --sort option Adding support to add field(s) to default sort order via using the '+' prefix, like for report: $ perf report Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol 7.39% swapper [kernel.kallsyms] [k] intel_idle 1.97% firefox libpthread-2.17.so [.] pthread_mutex_lock 1.39% firefox [snd_hda_intel] [k] azx_get_position 1.11% firefox libpthread-2.17.so [.] pthread_mutex_unlock $ perf report -s +cpu Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol CPU 2.89% swapper [kernel.kallsyms] [k] intel_idle 000 2.61% swapper [kernel.kallsyms] [k] intel_idle 002 1.20% swapper [kernel.kallsyms] [k] intel_idle 001 0.82% firefox libpthread-2.17.so [.] pthread_mutex_lock 002 Works in general for commands using --sort option. v2 with changes suggested: - Use dynamic memory instead static buffer - Fix error message typo Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140823125948.GA1193@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-23 20:59:48 +08:00
const char *sort_keys;
int ret = 0;
ret = setup_sort_order(evlist);
perf tools: Add +field argument support for --sort option Adding support to add field(s) to default sort order via using the '+' prefix, like for report: $ perf report Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol 7.39% swapper [kernel.kallsyms] [k] intel_idle 1.97% firefox libpthread-2.17.so [.] pthread_mutex_lock 1.39% firefox [snd_hda_intel] [k] azx_get_position 1.11% firefox libpthread-2.17.so [.] pthread_mutex_unlock $ perf report -s +cpu Samples: 2K of event 'cycles', Event count (approx.): 882172583 Overhead Command Shared Object Symbol CPU 2.89% swapper [kernel.kallsyms] [k] intel_idle 000 2.61% swapper [kernel.kallsyms] [k] intel_idle 002 1.20% swapper [kernel.kallsyms] [k] intel_idle 001 0.82% firefox libpthread-2.17.so [.] pthread_mutex_lock 002 Works in general for commands using --sort option. v2 with changes suggested: - Use dynamic memory instead static buffer - Fix error message typo Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140823125948.GA1193@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-23 20:59:48 +08:00
if (ret)
return ret;
sort_keys = sort_order;
if (sort_keys == NULL) {
if (is_strict_order(field_order)) {
/*
* If user specified field order but no sort order,
* we'll honor it and not add default sort orders.
*/
return 0;
}
sort_keys = get_default_sort_order(evlist);
}
str = strdup(sort_keys);
if (str == NULL) {
error("Not enough memory to setup sort keys");
return -ENOMEM;
}
/*
* Prepend overhead fields for backward compatibility.
*/
if (!is_strict_order(field_order)) {
str = setup_overhead(str);
if (str == NULL) {
error("Not enough memory to setup overhead keys");
return -ENOMEM;
}
}
ret = setup_sort_list(str, evlist);
free(str);
return ret;
}
perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 23:49:27 +08:00
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
void perf_hpp__set_elide(int idx, bool elide)
{
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
struct perf_hpp_fmt *fmt;
struct hpp_sort_entry *hse;
perf_hpp_list__for_each_format(&perf_hpp_list, fmt) {
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
if (!perf_hpp__is_sort_entry(fmt))
continue;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
if (hse->se->se_width_idx == idx) {
fmt->elide = elide;
break;
}
}
}
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
static bool __get_elide(struct strlist *list, const char *list_name, FILE *fp)
perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 23:49:27 +08:00
{
if (list && strlist__nr_entries(list) == 1) {
if (fp != NULL)
fprintf(fp, "# %s: %s\n", list_name,
strlist__entry(list, 0)->s);
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
return true;
}
return false;
}
static bool get_elide(int idx, FILE *output)
{
switch (idx) {
case HISTC_SYMBOL:
return __get_elide(symbol_conf.sym_list, "symbol", output);
case HISTC_DSO:
return __get_elide(symbol_conf.dso_list, "dso", output);
case HISTC_COMM:
return __get_elide(symbol_conf.comm_list, "comm", output);
default:
break;
perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 23:49:27 +08:00
}
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
if (sort__mode != SORT_MODE__BRANCH)
return false;
switch (idx) {
case HISTC_SYMBOL_FROM:
return __get_elide(symbol_conf.sym_from_list, "sym_from", output);
case HISTC_SYMBOL_TO:
return __get_elide(symbol_conf.sym_to_list, "sym_to", output);
case HISTC_DSO_FROM:
return __get_elide(symbol_conf.dso_from_list, "dso_from", output);
case HISTC_DSO_TO:
return __get_elide(symbol_conf.dso_to_list, "dso_to", output);
default:
break;
}
return false;
perf diff: Use perf_session__fprintf_hists just like 'perf record' That means that almost everything you can do with 'perf report' can be done with 'perf diff', for instance: $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2699 samples) ] $ perf record -f find / > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.062 MB perf.data (~2687 samples) ] perf diff | head -8 9.02% +1.00% find libc-2.10.1.so [.] _IO_vfprintf_internal 2.91% -1.00% find [kernel] [k] __kmalloc 2.85% -1.00% find [kernel] [k] ext4_htree_store_dirent 1.99% -1.00% find [kernel] [k] _atomic_dec_and_lock 2.44% find [kernel] [k] half_md4_transform $ So if you want to zoom into libc: $ perf diff --dsos libc-2.10.1.so | head -8 37.34% find [.] _IO_vfprintf_internal 10.34% find [.] __GI_memmove 8.25% +2.00% find [.] _int_malloc 5.07% -1.00% find [.] __GI_mempcpy 7.62% +2.00% find [.] _int_free $ And if there were multiple commands using libc, it is also possible to aggregate them all by using --sort symbol: $ perf diff --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% [.] __GI_mempcpy 7.62% +2.00% [.] _int_free $ The displacement column now is off by default, to use it: perf diff -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34% [.] _IO_vfprintf_internal 10.34% [.] __GI_memmove 8.25% +2.00% [.] _int_malloc 5.07% -1.00% +2 [.] __GI_mempcpy 7.62% +2.00% -1 [.] _int_free $ Using -t/--field-separator can be used for scripting: $ perf diff -t, -m --dsos libc-2.10.1.so --sort symbol | head -8 37.34, , ,[.] _IO_vfprintf_internal 10.34, , ,[.] __GI_memmove 8.25,+2.00%, ,[.] _int_malloc 5.07,-1.00%, +2,[.] __GI_mempcpy 7.62,+2.00%, -1,[.] _int_free 6.99,+1.00%, -1,[.] _IO_new_file_xsputn 1.89,-2.00%, +4,[.] __readdir64 $ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1260978567-550-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-16 23:49:27 +08:00
}
void sort__setup_elide(FILE *output)
{
struct perf_hpp_fmt *fmt;
struct hpp_sort_entry *hse;
perf_hpp_list__for_each_format(&perf_hpp_list, fmt) {
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
if (!perf_hpp__is_sort_entry(fmt))
continue;
hse = container_of(fmt, struct hpp_sort_entry, hpp);
fmt->elide = get_elide(hse->se->se_width_idx, output);
}
/*
* It makes no sense to elide all of sort entries.
* Just revert them to show up again.
*/
perf_hpp_list__for_each_format(&perf_hpp_list, fmt) {
if (!perf_hpp__is_sort_entry(fmt))
continue;
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
if (!fmt->elide)
return;
}
perf_hpp_list__for_each_format(&perf_hpp_list, fmt) {
if (!perf_hpp__is_sort_entry(fmt))
continue;
perf tools: Move elide bool into perf_hpp_fmt struct After output/sort fields refactoring, it's expensive to check the elide bool in its current location inside the 'struct sort_entry'. The perf_hpp__should_skip function gets highly noticable in workloads with high number of output/sort fields, like for: $ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio Performance report: 9.70% perf [.] perf_hpp__should_skip Moving the elide bool into the 'struct perf_hpp_fmt', which makes the perf_hpp__should_skip just single struct read. Got speedup of around 22% for my test perf.data workload. The change should not harm any other workload types. Performance counter stats for (10 runs): before: 358,319,732,626 cycles ( +- 0.55% ) 467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% ) 150.943975206 seconds time elapsed ( +- 0.62% ) now: 278,785,972,990 cycles ( +- 0.12% ) 370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% ) 116.416670507 seconds time elapsed ( +- 0.31% ) Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com Signed-off-by: Jiri Olsa <jolsa@kernel.org>
2014-05-23 23:15:47 +08:00
fmt->elide = false;
}
}
static int output_field_add(struct perf_hpp_list *list, char *tok)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(common_sort_dimensions); i++) {
struct sort_dimension *sd = &common_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
return __sort_dimension__add_output(list, sd);
}
for (i = 0; i < ARRAY_SIZE(hpp_sort_dimensions); i++) {
struct hpp_dimension *hd = &hpp_sort_dimensions[i];
if (strncasecmp(tok, hd->name, strlen(tok)))
continue;
return __hpp_dimension__add_output(list, hd);
}
for (i = 0; i < ARRAY_SIZE(bstack_sort_dimensions); i++) {
struct sort_dimension *sd = &bstack_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
return __sort_dimension__add_output(list, sd);
}
for (i = 0; i < ARRAY_SIZE(memory_sort_dimensions); i++) {
struct sort_dimension *sd = &memory_sort_dimensions[i];
if (strncasecmp(tok, sd->name, strlen(tok)))
continue;
return __sort_dimension__add_output(list, sd);
}
return -ESRCH;
}
static int setup_output_list(struct perf_hpp_list *list, char *str)
{
char *tmp, *tok;
int ret = 0;
for (tok = strtok_r(str, ", ", &tmp);
tok; tok = strtok_r(NULL, ", ", &tmp)) {
ret = output_field_add(list, tok);
if (ret == -EINVAL) {
error("Invalid --fields key: `%s'", tok);
break;
} else if (ret == -ESRCH) {
error("Unknown --fields key: `%s'", tok);
break;
}
}
return ret;
}
static void reset_dimensions(void)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(common_sort_dimensions); i++)
common_sort_dimensions[i].taken = 0;
for (i = 0; i < ARRAY_SIZE(hpp_sort_dimensions); i++)
hpp_sort_dimensions[i].taken = 0;
for (i = 0; i < ARRAY_SIZE(bstack_sort_dimensions); i++)
bstack_sort_dimensions[i].taken = 0;
for (i = 0; i < ARRAY_SIZE(memory_sort_dimensions); i++)
memory_sort_dimensions[i].taken = 0;
}
bool is_strict_order(const char *order)
{
return order && (*order != '+');
}
static int __setup_output_field(void)
{
char *str, *strp;
int ret = -EINVAL;
if (field_order == NULL)
return 0;
strp = str = strdup(field_order);
if (str == NULL) {
error("Not enough memory to setup output fields");
return -ENOMEM;
}
if (!is_strict_order(field_order))
strp++;
if (!strlen(strp)) {
error("Invalid --fields key: `+'");
goto out;
}
ret = setup_output_list(&perf_hpp_list, strp);
out:
free(str);
return ret;
}
int setup_sorting(struct perf_evlist *evlist)
{
int err;
err = __setup_sorting(evlist);
if (err < 0)
return err;
if (parent_pattern != default_parent_pattern) {
err = sort_dimension__add("parent", evlist);
if (err < 0)
return err;
}
reset_dimensions();
/*
* perf diff doesn't use default hpp output fields.
*/
if (sort__mode != SORT_MODE__DIFF)
perf_hpp__init();
err = __setup_output_field();
if (err < 0)
return err;
/* copy sort keys to output fields */
perf_hpp__setup_output_field(&perf_hpp_list);
/* and then copy output fields to sort keys */
perf_hpp__append_sort_keys(&perf_hpp_list);
return 0;
}
void reset_output_field(void)
{
sort__need_collapse = 0;
sort__has_parent = 0;
sort__has_sym = 0;
sort__has_dso = 0;
field_order = NULL;
sort_order = NULL;
reset_dimensions();
perf_hpp__reset_output_field(&perf_hpp_list);
}