linux/arch/x86/kernel/tsc_msr.c

130 lines
3.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* TSC frequency enumeration via MSR
*
* Copyright (C) 2013, 2018 Intel Corporation
* Author: Bin Gao <bin.gao@intel.com>
*/
#include <linux/kernel.h>
#include <asm/apic.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/msr.h>
#include <asm/param.h>
#include <asm/tsc.h>
#define MAX_NUM_FREQS 9
/*
* If MSR_PERF_STAT[31] is set, the maximum resolved bus ratio can be
* read in MSR_PLATFORM_ID[12:8], otherwise in MSR_PERF_STAT[44:40].
* Unfortunately some Intel Atom SoCs aren't quite compliant to this,
* so we need manually differentiate SoC families. This is what the
* field msr_plat does.
*/
struct freq_desc {
u8 msr_plat; /* 1: use MSR_PLATFORM_INFO, 0: MSR_IA32_PERF_STATUS */
u32 freqs[MAX_NUM_FREQS];
};
/*
* Penwell and Clovertrail use spread spectrum clock,
* so the freq number is not exactly the same as reported
* by MSR based on SDM.
*/
static const struct freq_desc freq_desc_pnw = {
0, { 0, 0, 0, 0, 0, 99840, 0, 83200 }
};
static const struct freq_desc freq_desc_clv = {
0, { 0, 133200, 0, 0, 0, 99840, 0, 83200 }
};
static const struct freq_desc freq_desc_byt = {
1, { 83300, 100000, 133300, 116700, 80000, 0, 0, 0 }
};
static const struct freq_desc freq_desc_cht = {
1, { 83300, 100000, 133300, 116700, 80000, 93300, 90000, 88900, 87500 }
};
static const struct freq_desc freq_desc_tng = {
1, { 0, 100000, 133300, 0, 0, 0, 0, 0 }
};
static const struct freq_desc freq_desc_ann = {
1, { 83300, 100000, 133300, 100000, 0, 0, 0, 0 }
};
static const struct x86_cpu_id tsc_msr_cpu_ids[] = {
INTEL_CPU_FAM6(ATOM_PENWELL, freq_desc_pnw),
INTEL_CPU_FAM6(ATOM_CLOVERVIEW, freq_desc_clv),
INTEL_CPU_FAM6(ATOM_SILVERMONT1, freq_desc_byt),
INTEL_CPU_FAM6(ATOM_AIRMONT, freq_desc_cht),
INTEL_CPU_FAM6(ATOM_MERRIFIELD, freq_desc_tng),
INTEL_CPU_FAM6(ATOM_MOOREFIELD, freq_desc_ann),
{}
};
/*
* MSR-based CPU/TSC frequency discovery for certain CPUs.
x86, tsc: Fallback to normal calibration if fast MSR calibration fails If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0+ #47 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000 RIP: 0010:[<ffffffff810aec14>] [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0 RSP: 0000:ffff880075507e58 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0 Stack: ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88 ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168 ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000 Call Trace: [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30 [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0 [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8 [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0 [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205 [<ffffffff8177c910>] ? rest_init+0x90/0x90 [<ffffffff8177c91e>] kernel_init+0xe/0x120 [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0 [<ffffffff8177c910>] ? rest_init+0x90/0x90 Prevent this from happening by: 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails. 2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration. [mw: Added subject and changelog] Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-19 19:52:29 +08:00
*
* Set global "lapic_timer_frequency" to bus_clock_cycles/jiffy
* Return processor base frequency in KHz, or 0 on failure.
*/
unsigned long cpu_khz_from_msr(void)
{
u32 lo, hi, ratio, freq;
const struct freq_desc *freq_desc;
const struct x86_cpu_id *id;
x86, tsc: Fallback to normal calibration if fast MSR calibration fails If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0+ #47 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000 RIP: 0010:[<ffffffff810aec14>] [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0 RSP: 0000:ffff880075507e58 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0 Stack: ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88 ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168 ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000 Call Trace: [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30 [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0 [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8 [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0 [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205 [<ffffffff8177c910>] ? rest_init+0x90/0x90 [<ffffffff8177c91e>] kernel_init+0xe/0x120 [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0 [<ffffffff8177c910>] ? rest_init+0x90/0x90 Prevent this from happening by: 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails. 2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration. [mw: Added subject and changelog] Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-19 19:52:29 +08:00
unsigned long res;
id = x86_match_cpu(tsc_msr_cpu_ids);
if (!id)
return 0;
freq_desc = (struct freq_desc *)id->driver_data;
if (freq_desc->msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
ratio = (lo >> 8) & 0xff;
} else {
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
ratio = (hi >> 8) & 0x1f;
}
/* Get FSB FREQ ID */
rdmsr(MSR_FSB_FREQ, lo, hi);
/* Map CPU reference clock freq ID(0-7) to CPU reference clock freq(KHz) */
freq = freq_desc->freqs[lo & 0x7];
/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
x86, tsc: Fallback to normal calibration if fast MSR calibration fails If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0+ #47 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000 RIP: 0010:[<ffffffff810aec14>] [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0 RSP: 0000:ffff880075507e58 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0 Stack: ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88 ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168 ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000 Call Trace: [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30 [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0 [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8 [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0 [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205 [<ffffffff8177c910>] ? rest_init+0x90/0x90 [<ffffffff8177c91e>] kernel_init+0xe/0x120 [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0 [<ffffffff8177c910>] ? rest_init+0x90/0x90 Prevent this from happening by: 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails. 2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration. [mw: Added subject and changelog] Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-19 19:52:29 +08:00
res = freq * ratio;
#ifdef CONFIG_X86_LOCAL_APIC
lapic_timer_frequency = (freq * 1000) / HZ;
#endif
/*
* TSC frequency determined by MSR is always considered "known"
* because it is reported by HW.
* Another fact is that on MSR capable platforms, PIT/HPET is
* generally not available so calibration won't work at all.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
/*
* Unfortunately there is no way for hardware to tell whether the
* TSC is reliable. We were told by silicon design team that TSC
* on Atom SoCs are always "reliable". TSC is also the only
* reliable clocksource on these SoCs (HPET is either not present
* or not functional) so mark TSC reliable which removes the
* requirement for a watchdog clocksource.
*/
setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
x86, tsc: Fallback to normal calibration if fast MSR calibration fails If we cannot calibrate TSC via MSR based calibration try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that to the caller. This value gets then propagated further to clockevents code resulting division by zero oops like the one below: divide error: 0000 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0+ #47 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000 RIP: 0010:[<ffffffff810aec14>] [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0 RSP: 0000:ffff880075507e58 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0 Stack: ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88 ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168 ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000 Call Trace: [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30 [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0 [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8 [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0 [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205 [<ffffffff8177c910>] ? rest_init+0x90/0x90 [<ffffffff8177c91e>] kernel_init+0xe/0x120 [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0 [<ffffffff8177c910>] ? rest_init+0x90/0x90 Prevent this from happening by: 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero if it fails. 2) Check this return value in native_calibrate_tsc() and in case of zero fallback to use normal non-MSR based calibration. [mw: Added subject and changelog] Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-19 19:52:29 +08:00
return res;
}