korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-04 09:34:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
262c083d13
linux/arch/arm64/crypto/aes-neon.S

353 lines
12 KiB
ArmAsm
Raw Normal View History

arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
/*
* linux/arch/arm64/crypto/aes-neon.S - AES cipher for ARMv8 NEON
*
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
* Copyright (C) 2013 - 2017 Linaro Ltd. <ard.biesheuvel@linaro.org>
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
crypto: arm64/aes-neon - fix for big endian The AES implementation using pure NEON instructions relies on the generic AES key schedule generation routines, which store the round keys as arrays of 32-bit quantities stored in memory using native endianness. This means we should refer to these round keys using 4x4 loads rather than 16x1 loads. In addition, the ShiftRows tables are loading using a single scalar load, which is also affected by endianness, so emit these tables in the correct order depending on whether we are building for big endian or not. Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-12 02:15:18 +08:00
#include <asm/assembler.h>
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
#define AES_ENTRY(func) ENTRY(neon_ ## func)
#define AES_ENDPROC(func) ENDPROC(neon_ ## func)
/* multiply by polynomial 'x' in GF(2^8) */
.macro mul_by_x, out, in, temp, const
sshr \temp, \in, #7
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
shl \out, \in, #1
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
and \temp, \temp, \const
eor \out, \out, \temp
.endm
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
/* multiply by polynomial 'x^2' in GF(2^8) */
.macro mul_by_x2, out, in, temp, const
ushr \temp, \in, #6
shl \out, \in, #2
pmul \temp, \temp, \const
eor \out, \out, \temp
.endm
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
/* preload the entire Sbox */
.macro prepare, sbox, shiftrows, temp
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
movi v12.16b, #0x1b
crypto: arm64/aes-neon - move literal data to .rodata section Move the S-boxes and some other literals to the .rodata section where it is safe from being exploited by speculative execution. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-10 20:11:38 +08:00
ldr_l q13, \shiftrows, \temp
ldr_l q14, .Lror32by8, \temp
adr_l \temp, \sbox
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
ld1 {v16.16b-v19.16b}, [\temp], #64
ld1 {v20.16b-v23.16b}, [\temp], #64
ld1 {v24.16b-v27.16b}, [\temp], #64
ld1 {v28.16b-v31.16b}, [\temp]
.endm
/* do preload for encryption */
.macro enc_prepare, ignore0, ignore1, temp
prepare .LForward_Sbox, .LForward_ShiftRows, \temp
.endm
.macro enc_switch_key, ignore0, ignore1, temp
/* do nothing */
.endm
/* do preload for decryption */
.macro dec_prepare, ignore0, ignore1, temp
prepare .LReverse_Sbox, .LReverse_ShiftRows, \temp
.endm
/* apply SubBytes transformation using the the preloaded Sbox */
.macro sub_bytes, in
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v9.16b, \in\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in\().16b, {v16.16b-v19.16b}, \in\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v10.16b, v9.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in\().16b, {v20.16b-v23.16b}, v9.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v11.16b, v10.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in\().16b, {v24.16b-v27.16b}, v10.16b
tbx \in\().16b, {v28.16b-v31.16b}, v11.16b
.endm
/* apply MixColumns transformation */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.macro mix_columns, in, enc
.if \enc == 0
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
/* Inverse MixColumns: pre-multiply by { 5, 0, 4, 0 } */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
mul_by_x2 v8.16b, \in\().16b, v9.16b, v12.16b
eor \in\().16b, \in\().16b, v8.16b
rev32 v8.8h, v8.8h
eor \in\().16b, \in\().16b, v8.16b
.endif
mul_by_x v9.16b, \in\().16b, v8.16b, v12.16b
rev32 v8.8h, \in\().8h
eor v8.16b, v8.16b, v9.16b
eor \in\().16b, \in\().16b, v8.16b
tbl \in\().16b, {\in\().16b}, v14.16b
eor \in\().16b, \in\().16b, v8.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
.endm
.macro do_block, enc, in, rounds, rk, rkp, i
crypto: arm64/aes-neon - fix for big endian The AES implementation using pure NEON instructions relies on the generic AES key schedule generation routines, which store the round keys as arrays of 32-bit quantities stored in memory using native endianness. This means we should refer to these round keys using 4x4 loads rather than 16x1 loads. In addition, the ShiftRows tables are loading using a single scalar load, which is also affected by endianness, so emit these tables in the correct order depending on whether we are building for big endian or not. Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-12 02:15:18 +08:00
ld1 {v15.4s}, [\rk]
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
add \rkp, \rk, #16
mov \i, \rounds
1111: eor \in\().16b, \in\().16b, v15.16b /* ^round key */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
movi v15.16b, #0x40
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in\().16b, {\in\().16b}, v13.16b /* ShiftRows */
sub_bytes \in
subs \i, \i, #1
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
ld1 {v15.4s}, [\rkp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
beq 2222f
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
mix_columns \in, \enc
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
b 1111b
2222: eor \in\().16b, \in\().16b, v15.16b /* ^round key */
.endm
.macro encrypt_block, in, rounds, rk, rkp, i
do_block 1, \in, \rounds, \rk, \rkp, \i
.endm
.macro decrypt_block, in, rounds, rk, rkp, i
do_block 0, \in, \rounds, \rk, \rkp, \i
.endm
/*
* Interleaved versions: functionally equivalent to the
* ones above, but applied to 2 or 4 AES states in parallel.
*/
.macro sub_bytes_2x, in0, in1
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v8.16b, \in0\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in0\().16b, {v16.16b-v19.16b}, \in0\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v9.16b, \in1\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in1\().16b, {v16.16b-v19.16b}, \in1\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v10.16b, v8.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in0\().16b, {v20.16b-v23.16b}, v8.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v11.16b, v9.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in1\().16b, {v20.16b-v23.16b}, v9.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v8.16b, v10.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in0\().16b, {v24.16b-v27.16b}, v10.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v9.16b, v11.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in1\().16b, {v24.16b-v27.16b}, v11.16b
tbx \in0\().16b, {v28.16b-v31.16b}, v8.16b
tbx \in1\().16b, {v28.16b-v31.16b}, v9.16b
.endm
.macro sub_bytes_4x, in0, in1, in2, in3
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v8.16b, \in0\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in0\().16b, {v16.16b-v19.16b}, \in0\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v9.16b, \in1\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in1\().16b, {v16.16b-v19.16b}, \in1\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v10.16b, \in2\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in2\().16b, {v16.16b-v19.16b}, \in2\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v11.16b, \in3\().16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in3\().16b, {v16.16b-v19.16b}, \in3\().16b
tbx \in0\().16b, {v20.16b-v23.16b}, v8.16b
tbx \in1\().16b, {v20.16b-v23.16b}, v9.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v8.16b, v8.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in2\().16b, {v20.16b-v23.16b}, v10.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v9.16b, v9.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in3\().16b, {v20.16b-v23.16b}, v11.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v10.16b, v10.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in0\().16b, {v24.16b-v27.16b}, v8.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v11.16b, v11.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in1\().16b, {v24.16b-v27.16b}, v9.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v8.16b, v8.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in2\().16b, {v24.16b-v27.16b}, v10.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v9.16b, v9.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in3\().16b, {v24.16b-v27.16b}, v11.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v10.16b, v10.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in0\().16b, {v28.16b-v31.16b}, v8.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub v11.16b, v11.16b, v15.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbx \in1\().16b, {v28.16b-v31.16b}, v9.16b
tbx \in2\().16b, {v28.16b-v31.16b}, v10.16b
tbx \in3\().16b, {v28.16b-v31.16b}, v11.16b
.endm
.macro mul_by_x_2x, out0, out1, in0, in1, tmp0, tmp1, const
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sshr \tmp0\().16b, \in0\().16b, #7
shl \out0\().16b, \in0\().16b, #1
sshr \tmp1\().16b, \in1\().16b, #7
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
and \tmp0\().16b, \tmp0\().16b, \const\().16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
shl \out1\().16b, \in1\().16b, #1
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
and \tmp1\().16b, \tmp1\().16b, \const\().16b
eor \out0\().16b, \out0\().16b, \tmp0\().16b
eor \out1\().16b, \out1\().16b, \tmp1\().16b
.endm
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.macro mul_by_x2_2x, out0, out1, in0, in1, tmp0, tmp1, const
ushr \tmp0\().16b, \in0\().16b, #6
shl \out0\().16b, \in0\().16b, #2
ushr \tmp1\().16b, \in1\().16b, #6
pmul \tmp0\().16b, \tmp0\().16b, \const\().16b
shl \out1\().16b, \in1\().16b, #2
pmul \tmp1\().16b, \tmp1\().16b, \const\().16b
eor \out0\().16b, \out0\().16b, \tmp0\().16b
eor \out1\().16b, \out1\().16b, \tmp1\().16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
.endm
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.macro mix_columns_2x, in0, in1, enc
.if \enc == 0
/* Inverse MixColumns: pre-multiply by { 5, 0, 4, 0 } */
mul_by_x2_2x v8, v9, \in0, \in1, v10, v11, v12
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
eor \in0\().16b, \in0\().16b, v8.16b
rev32 v8.8h, v8.8h
eor \in1\().16b, \in1\().16b, v9.16b
rev32 v9.8h, v9.8h
eor \in0\().16b, \in0\().16b, v8.16b
eor \in1\().16b, \in1\().16b, v9.16b
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.endif
mul_by_x_2x v8, v9, \in0, \in1, v10, v11, v12
rev32 v10.8h, \in0\().8h
rev32 v11.8h, \in1\().8h
eor v10.16b, v10.16b, v8.16b
eor v11.16b, v11.16b, v9.16b
eor \in0\().16b, \in0\().16b, v10.16b
eor \in1\().16b, \in1\().16b, v11.16b
tbl \in0\().16b, {\in0\().16b}, v14.16b
tbl \in1\().16b, {\in1\().16b}, v14.16b
eor \in0\().16b, \in0\().16b, v10.16b
eor \in1\().16b, \in1\().16b, v11.16b
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
.endm
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.macro do_block_2x, enc, in0, in1, rounds, rk, rkp, i
crypto: arm64/aes-neon - fix for big endian The AES implementation using pure NEON instructions relies on the generic AES key schedule generation routines, which store the round keys as arrays of 32-bit quantities stored in memory using native endianness. This means we should refer to these round keys using 4x4 loads rather than 16x1 loads. In addition, the ShiftRows tables are loading using a single scalar load, which is also affected by endianness, so emit these tables in the correct order depending on whether we are building for big endian or not. Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-12 02:15:18 +08:00
ld1 {v15.4s}, [\rk]
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
add \rkp, \rk, #16
mov \i, \rounds
1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */
eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
movi v15.16b, #0x40
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in0\().16b, {\in0\().16b}, v13.16b /* ShiftRows */
tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub_bytes_2x \in0, \in1
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
subs \i, \i, #1
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
ld1 {v15.4s}, [\rkp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
beq 2222f
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
mix_columns_2x \in0, \in1, \enc
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
b 1111b
2222: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */
eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */
.endm
.macro do_block_4x, enc, in0, in1, in2, in3, rounds, rk, rkp, i
crypto: arm64/aes-neon - fix for big endian The AES implementation using pure NEON instructions relies on the generic AES key schedule generation routines, which store the round keys as arrays of 32-bit quantities stored in memory using native endianness. This means we should refer to these round keys using 4x4 loads rather than 16x1 loads. In addition, the ShiftRows tables are loading using a single scalar load, which is also affected by endianness, so emit these tables in the correct order depending on whether we are building for big endian or not. Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-10-12 02:15:18 +08:00
ld1 {v15.4s}, [\rk]
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
add \rkp, \rk, #16
mov \i, \rounds
1111: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */
eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */
eor \in2\().16b, \in2\().16b, v15.16b /* ^round key */
eor \in3\().16b, \in3\().16b, v15.16b /* ^round key */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
movi v15.16b, #0x40
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
tbl \in0\().16b, {\in0\().16b}, v13.16b /* ShiftRows */
tbl \in1\().16b, {\in1\().16b}, v13.16b /* ShiftRows */
tbl \in2\().16b, {\in2\().16b}, v13.16b /* ShiftRows */
tbl \in3\().16b, {\in3\().16b}, v13.16b /* ShiftRows */
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
sub_bytes_4x \in0, \in1, \in2, \in3
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
subs \i, \i, #1
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
ld1 {v15.4s}, [\rkp], #16
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
beq 2222f
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
mix_columns_2x \in0, \in1, \enc
mix_columns_2x \in2, \in3, \enc
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
b 1111b
2222: eor \in0\().16b, \in0\().16b, v15.16b /* ^round key */
eor \in1\().16b, \in1\().16b, v15.16b /* ^round key */
eor \in2\().16b, \in2\().16b, v15.16b /* ^round key */
eor \in3\().16b, \in3\().16b, v15.16b /* ^round key */
.endm
.macro encrypt_block2x, in0, in1, rounds, rk, rkp, i
do_block_2x 1, \in0, \in1, \rounds, \rk, \rkp, \i
.endm
.macro decrypt_block2x, in0, in1, rounds, rk, rkp, i
do_block_2x 0, \in0, \in1, \rounds, \rk, \rkp, \i
.endm
.macro encrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i
do_block_4x 1, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i
.endm
.macro decrypt_block4x, in0, in1, in2, in3, rounds, rk, rkp, i
do_block_4x 0, \in0, \in1, \in2, \in3, \rounds, \rk, \rkp, \i
.endm
#include "aes-modes.S"
crypto: arm64/aes-neon - move literal data to .rodata section Move the S-boxes and some other literals to the .rodata section where it is safe from being exploited by speculative execution. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-10 20:11:38 +08:00
.section ".rodata", "a"
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.align 6
arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions This adds ARMv8 implementations of AES in ECB, CBC, CTR and XTS modes, both for ARMv8 with Crypto Extensions and for plain ARMv8 NEON. The Crypto Extensions version can only run on ARMv8 implementations that have support for these optional extensions. The plain NEON version is a table based yet time invariant implementation. All S-box substitutions are performed in parallel, leveraging the wide range of ARMv8's tbl/tbx instructions, and the huge NEON register file, which can comfortably hold the entire S-box and still have room to spare for doing the actual computations. The key expansion routines were borrowed from aes_generic. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
2014-03-21 17:19:17 +08:00
.LForward_Sbox:
.byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5
.byte 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76
.byte 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0
.byte 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0
.byte 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc
.byte 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15
.byte 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a
.byte 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75
.byte 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0
.byte 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84
.byte 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b
.byte 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf
.byte 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85
.byte 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8
.byte 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5
.byte 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2
.byte 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17
.byte 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73
.byte 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88
.byte 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb
.byte 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c
.byte 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79
.byte 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9
.byte 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08
.byte 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6
.byte 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a
.byte 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e
.byte 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e
.byte 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94
.byte 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf
.byte 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68
.byte 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16
.LReverse_Sbox:
.byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38
.byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb
.byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87
.byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb
.byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d
.byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e
.byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2
.byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25
.byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16
.byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92
.byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda
.byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84
.byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a
.byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06
.byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02
.byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b
.byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea
.byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73
.byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85
.byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e
.byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89
.byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b
.byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20
.byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4
.byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31
.byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f
.byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d
.byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef
.byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0
.byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61
.byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26
.byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d
crypto: arm64/aes-neon-blk - tweak performance for low end cores The non-bitsliced AES implementation using the NEON is highly sensitive to micro-architectural details, and, as it turns out, the Cortex-A53 on the Raspberry Pi 3 is a core that can benefit from this code, given that its scalar AES performance is abysmal (32.9 cycles per byte). The new bitsliced AES code manages 19.8 cycles per byte on this core, but can only operate on 8 blocks at a time, which is not supported by all chaining modes. With a bit of tweaking, we can get the plain NEON code to run at 22.0 cycles per byte, making it useful for sequential modes like CBC encryption. (Like bitsliced NEON, the plain NEON implementation does not use any lookup tables, which makes it easy on the D-cache, and invulnerable to cache timing attacks) So tweak the plain NEON AES code to use tbl instructions rather than shl/sri pairs, and to avoid the need to reload permutation vectors or other constants from memory in every round. Also, improve the decryption performance by switching to 16x8 pmul instructions for the performing the multiplications in GF(2^8). To allow the ECB and CBC encrypt routines to be reused by the bitsliced NEON code in a subsequent patch, export them from the module. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-29 07:25:38 +08:00
.LForward_ShiftRows:
.octa 0x0b06010c07020d08030e09040f0a0500
.LReverse_ShiftRows:
.octa 0x0306090c0f0205080b0e0104070a0d00
.Lror32by8:
.octa 0x0c0f0e0d080b0a090407060500030201
Reference in New Issue Copy Permalink