linux/tools/perf/util/util.c

497 lines
9.0 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include "../perf.h"
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
#include "util.h"
#include "debug.h"
#include <api/fs/fs.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/utsname.h>
#include <dirent.h>
#include <fcntl.h>
#include <inttypes.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <limits.h>
#include <linux/kernel.h>
#include <linux/log2.h>
#include <linux/time64.h>
#include <unistd.h>
#include "strlist.h"
/*
* XXX We need to find a better place for these things...
*/
bool perf_singlethreaded = true;
void perf_set_singlethreaded(void)
{
perf_singlethreaded = true;
}
void perf_set_multithreaded(void)
{
perf_singlethreaded = false;
}
unsigned int page_size;
int cacheline_size;
int sysctl_perf_event_max_stack = PERF_MAX_STACK_DEPTH;
int sysctl_perf_event_max_contexts_per_stack = PERF_MAX_CONTEXTS_PER_STACK;
bool test_attr__enabled;
bool perf_host = true;
bool perf_guest = false;
void event_attr_init(struct perf_event_attr *attr)
{
if (!perf_host)
attr->exclude_host = 1;
if (!perf_guest)
attr->exclude_guest = 1;
/* to capture ABI version */
attr->size = sizeof(*attr);
}
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
int mkdir_p(char *path, mode_t mode)
{
struct stat st;
int err;
char *d = path;
if (*d != '/')
return -1;
if (stat(path, &st) == 0)
return 0;
while (*++d == '/');
while ((d = strchr(d, '/'))) {
*d = '\0';
err = stat(path, &st) && mkdir(path, mode);
*d++ = '/';
if (err)
return -1;
while (*d == '/')
++d;
}
return (stat(path, &st) && mkdir(path, mode)) ? -1 : 0;
}
int rm_rf(const char *path)
{
DIR *dir;
int ret = 0;
struct dirent *d;
char namebuf[PATH_MAX];
dir = opendir(path);
if (dir == NULL)
return 0;
while ((d = readdir(dir)) != NULL && !ret) {
struct stat statbuf;
if (!strcmp(d->d_name, ".") || !strcmp(d->d_name, ".."))
continue;
scnprintf(namebuf, sizeof(namebuf), "%s/%s",
path, d->d_name);
/* We have to check symbolic link itself */
ret = lstat(namebuf, &statbuf);
if (ret < 0) {
pr_debug("stat failed: %s\n", namebuf);
break;
}
if (S_ISDIR(statbuf.st_mode))
ret = rm_rf(namebuf);
else
ret = unlink(namebuf);
}
closedir(dir);
if (ret < 0)
return ret;
return rmdir(path);
}
/* A filter which removes dot files */
bool lsdir_no_dot_filter(const char *name __maybe_unused, struct dirent *d)
{
return d->d_name[0] != '.';
}
/* lsdir reads a directory and store it in strlist */
struct strlist *lsdir(const char *name,
bool (*filter)(const char *, struct dirent *))
{
struct strlist *list = NULL;
DIR *dir;
struct dirent *d;
dir = opendir(name);
if (!dir)
return NULL;
list = strlist__new(NULL, NULL);
if (!list) {
errno = ENOMEM;
goto out;
}
while ((d = readdir(dir)) != NULL) {
if (!filter || filter(name, d))
strlist__add(list, d->d_name);
}
out:
closedir(dir);
return list;
}
static int slow_copyfile(const char *from, const char *to, struct nsinfo *nsi)
{
int err = -1;
char *line = NULL;
size_t n;
FILE *from_fp, *to_fp;
struct nscookie nsc;
nsinfo__mountns_enter(nsi, &nsc);
from_fp = fopen(from, "r");
nsinfo__mountns_exit(&nsc);
if (from_fp == NULL)
goto out;
to_fp = fopen(to, "w");
if (to_fp == NULL)
goto out_fclose_from;
while (getline(&line, &n, from_fp) > 0)
if (fputs(line, to_fp) == EOF)
goto out_fclose_to;
err = 0;
out_fclose_to:
fclose(to_fp);
free(line);
out_fclose_from:
fclose(from_fp);
out:
return err;
}
static int copyfile_offset(int ifd, loff_t off_in, int ofd, loff_t off_out, u64 size)
{
void *ptr;
loff_t pgoff;
pgoff = off_in & ~(page_size - 1);
off_in -= pgoff;
ptr = mmap(NULL, off_in + size, PROT_READ, MAP_PRIVATE, ifd, pgoff);
if (ptr == MAP_FAILED)
return -1;
while (size) {
ssize_t ret = pwrite(ofd, ptr + off_in, size, off_out);
if (ret < 0 && errno == EINTR)
continue;
if (ret <= 0)
break;
size -= ret;
off_in += ret;
off_out -= ret;
}
munmap(ptr, off_in + size);
return size ? -1 : 0;
}
static int copyfile_mode_ns(const char *from, const char *to, mode_t mode,
struct nsinfo *nsi)
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
{
int fromfd, tofd;
struct stat st;
int err;
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
char *tmp = NULL, *ptr = NULL;
struct nscookie nsc;
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
nsinfo__mountns_enter(nsi, &nsc);
err = stat(from, &st);
nsinfo__mountns_exit(&nsc);
if (err)
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
goto out;
err = -1;
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
/* extra 'x' at the end is to reserve space for '.' */
if (asprintf(&tmp, "%s.XXXXXXx", to) < 0) {
tmp = NULL;
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
goto out;
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
}
ptr = strrchr(tmp, '/');
if (!ptr)
goto out;
ptr = memmove(ptr + 1, ptr, strlen(ptr) - 1);
*ptr = '.';
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
tofd = mkstemp(tmp);
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
if (tofd < 0)
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
goto out;
if (fchmod(tofd, mode))
goto out_close_to;
if (st.st_size == 0) { /* /proc? do it slowly... */
err = slow_copyfile(from, tmp, nsi);
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
goto out_close_to;
}
nsinfo__mountns_enter(nsi, &nsc);
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
fromfd = open(from, O_RDONLY);
nsinfo__mountns_exit(&nsc);
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
if (fromfd < 0)
goto out_close_to;
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
err = copyfile_offset(fromfd, 0, tofd, 0, st.st_size);
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
close(fromfd);
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
out_close_to:
close(tofd);
if (!err)
err = link(tmp, to);
unlink(tmp);
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
out:
perf tools: Avoid possible race condition in copyfile() Use unique temporary files when copying to buildid dir to prevent races in case multiple instances are trying to copy same file. This is done by - creating template in form <path>/.<filename>.XXXXXX where the suffix is used by mkstemp() to create unique file - change file mode - copy content - if successful link temp file to target file - unlink temp file At this point the only file left at target path should be the desired one either created by us or other instance if we raced. This should also prevent not yet fully copied files to be visible to to other perf instances that could try to parse them. On top of that slow_copyfile no longer needs to deal with file mode when creating file since temporary file is already created and mode is set. Succesfully tested by myself by running perf record, archive and reading the data on other system and by running perf buildid-cache on perf binary itself. I also did revert fix from 0635b0f that to exposes previously fixed race with EEXIST and recreator test passed sucessfully. Signed-off-by: Milos Vyletel <milos@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-08 22:50:16 +08:00
free(tmp);
perf record: Introduce a symtab cache Now a cache will be created in a ~/.debug debuginfo like hierarchy, so that at the end of a 'perf record' session all the binaries (with build-ids) involved get collected and indexed by their build-ids, so that perf report can find them. This is interesting when developing software where you want to do a 'perf diff' with the previous build and opens avenues for lots more interesting tools, like a 'perf diff --graph' that takes more than two binaries into account. Tunables for collecting just the symtabs can be added if one doesn't want to have the full binary, but having the full binary allows things like 'perf rerecord' or other tools that can re-run the tests by having access to the exact binary in some perf.data file, so it may well be interesting to keep the full binary there. Space consumption is minimised by trying to use hard links, a 'perf cache' tool to manage the space used, a la ccache is required to purge older entries. With this in place it will be possible also to introduce new commands, 'perf archive' and 'perf restore' (or some more suitable and future proof names) to create a cpio/tar file with the perf data and the files in the cache that _had_ perf hits of interest. There are more aspects to polish, like finding the right vmlinux file to cache, etc, but this is enough for a first step. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-28 07:37:06 +08:00
return err;
}
int copyfile_ns(const char *from, const char *to, struct nsinfo *nsi)
{
return copyfile_mode_ns(from, to, 0755, nsi);
}
int copyfile_mode(const char *from, const char *to, mode_t mode)
{
return copyfile_mode_ns(from, to, mode, NULL);
}
int copyfile(const char *from, const char *to)
{
return copyfile_mode(from, to, 0755);
}
static ssize_t ion(bool is_read, int fd, void *buf, size_t n)
{
void *buf_start = buf;
size_t left = n;
while (left) {
/* buf must be treated as const if !is_read. */
ssize_t ret = is_read ? read(fd, buf, left) :
write(fd, buf, left);
if (ret < 0 && errno == EINTR)
continue;
if (ret <= 0)
return ret;
left -= ret;
buf += ret;
}
BUG_ON((size_t)(buf - buf_start) != n);
return n;
}
/*
* Read exactly 'n' bytes or return an error.
*/
ssize_t readn(int fd, void *buf, size_t n)
{
return ion(true, fd, buf, n);
}
/*
* Write exactly 'n' bytes or return an error.
*/
ssize_t writen(int fd, const void *buf, size_t n)
{
/* ion does not modify buf. */
return ion(false, fd, (void *)buf, n);
}
size_t hex_width(u64 v)
{
size_t n = 1;
while ((v >>= 4))
++n;
return n;
}
static int hex(char ch)
{
if ((ch >= '0') && (ch <= '9'))
return ch - '0';
if ((ch >= 'a') && (ch <= 'f'))
return ch - 'a' + 10;
if ((ch >= 'A') && (ch <= 'F'))
return ch - 'A' + 10;
return -1;
}
/*
* While we find nice hex chars, build a long_val.
* Return number of chars processed.
*/
int hex2u64(const char *ptr, u64 *long_val)
{
const char *p = ptr;
*long_val = 0;
while (*p) {
const int hex_val = hex(*p);
if (hex_val < 0)
break;
*long_val = (*long_val << 4) | hex_val;
p++;
}
return p - ptr;
}
int perf_event_paranoid(void)
{
int value;
if (sysctl__read_int("kernel/perf_event_paranoid", &value))
return INT_MAX;
return value;
}
perf tools: Fix kernel version error in ubuntu On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-15 12:05:44 +08:00
static int
fetch_ubuntu_kernel_version(unsigned int *puint)
{
ssize_t len;
size_t line_len = 0;
char *ptr, *line = NULL;
int version, patchlevel, sublevel, err;
FILE *vsig;
perf tools: Fix kernel version error in ubuntu On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-15 12:05:44 +08:00
if (!puint)
return 0;
vsig = fopen("/proc/version_signature", "r");
perf tools: Fix kernel version error in ubuntu On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-15 12:05:44 +08:00
if (!vsig) {
pr_debug("Open /proc/version_signature failed: %s\n",
strerror(errno));
return -1;
}
len = getline(&line, &line_len, vsig);
fclose(vsig);
err = -1;
if (len <= 0) {
pr_debug("Reading from /proc/version_signature failed: %s\n",
strerror(errno));
goto errout;
}
ptr = strrchr(line, ' ');
if (!ptr) {
pr_debug("Parsing /proc/version_signature failed: %s\n", line);
goto errout;
}
err = sscanf(ptr + 1, "%d.%d.%d",
&version, &patchlevel, &sublevel);
if (err != 3) {
pr_debug("Unable to get kernel version from /proc/version_signature '%s'\n",
line);
goto errout;
}
*puint = (version << 16) + (patchlevel << 8) + sublevel;
perf tools: Fix kernel version error in ubuntu On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-15 12:05:44 +08:00
err = 0;
errout:
free(line);
return err;
}
int
fetch_kernel_version(unsigned int *puint, char *str,
size_t str_size)
{
struct utsname utsname;
int version, patchlevel, sublevel, err;
perf tools: Fix kernel version error in ubuntu On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-15 12:05:44 +08:00
bool int_ver_ready = false;
if (access("/proc/version_signature", R_OK) == 0)
if (!fetch_ubuntu_kernel_version(puint))
int_ver_ready = true;
if (uname(&utsname))
return -1;
if (str && str_size) {
strncpy(str, utsname.release, str_size);
str[str_size - 1] = '\0';
}
if (!puint || int_ver_ready)
return 0;
err = sscanf(utsname.release, "%d.%d.%d",
&version, &patchlevel, &sublevel);
if (err != 3) {
perf tools: Fix kernel version error in ubuntu On ubuntu the internal kernel version code is different from what can be retrived from uname: $ uname -r 4.4.0-47-generic $ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h #define LINUX_VERSION_CODE 263192 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) $ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h #define UTS_RELEASE "4.4.0-47-generic" #define UTS_UBUNTU_RELEASE_ABI 47 $ cat /proc/version_signature Ubuntu 4.4.0-47.68-generic 4.4.24 The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but `uname -r` reports 4.4.0. This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become an incorrect value, results in magic failure in BPF loading: $ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls event syntax error: './tools/perf/tests/bpf-script-example.c' \___ Failed to load program for unknown reason According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the correct kernel version can be retrived through /proc/version_signature, which is ubuntu specific. This patch checks the existance of /proc/version_signature, and returns version number through parsing this file instead of uname. Version string is untouched (value returns from uname) because `uname -r` is required to be consistence with path of kbuild directory in /lib/module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-15 12:05:44 +08:00
pr_debug("Unable to get kernel version from uname '%s'\n",
utsname.release);
return -1;
}
*puint = (version << 16) + (patchlevel << 8) + sublevel;
return 0;
}
const char *perf_tip(const char *dirpath)
{
struct strlist *tips;
struct str_node *node;
char *tip = NULL;
struct strlist_config conf = {
.dirname = dirpath,
.file_only = true,
};
tips = strlist__new("tips.txt", &conf);
if (tips == NULL)
return errno == ENOENT ? NULL :
"Tip: check path of tips.txt or get more memory! ;-p";
if (strlist__nr_entries(tips) == 0)
goto out;
node = strlist__entry(tips, random() % strlist__nr_entries(tips));
if (asprintf(&tip, "Tip: %s", node->s) < 0)
tip = (char *)"Tip: get more memory! ;-)";
out:
strlist__delete(tips);
return tip;
}