linux/net/ipv6/tcp_ipv6.c

2451 lines
64 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* TCP over IPv6
* Linux INET6 implementation
*
* Authors:
* Pedro Roque <roque@di.fc.ul.pt>
*
* Based on:
* linux/net/ipv4/tcp.c
* linux/net/ipv4/tcp_input.c
* linux/net/ipv4/tcp_output.c
*
* Fixes:
* Hideaki YOSHIFUJI : sin6_scope_id support
* YOSHIFUJI Hideaki @USAGI and: Support IPV6_V6ONLY socket option, which
* Alexey Kuznetsov allow both IPv4 and IPv6 sockets to bind
* a single port at the same time.
* YOSHIFUJI Hideaki @USAGI: convert /proc/net/tcp6 to seq_file.
*/
#include <linux/bottom_half.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/jiffies.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/jhash.h>
#include <linux/ipsec.h>
#include <linux/times.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
#include <linux/random.h>
#include <linux/indirect_call_wrapper.h>
#include <net/tcp.h>
#include <net/ndisc.h>
#include <net/inet6_hashtables.h>
#include <net/inet6_connection_sock.h>
#include <net/ipv6.h>
#include <net/transp_v6.h>
#include <net/addrconf.h>
#include <net/ip6_route.h>
#include <net/ip6_checksum.h>
#include <net/inet_ecn.h>
#include <net/protocol.h>
#include <net/xfrm.h>
#include <net/snmp.h>
#include <net/dsfield.h>
#include <net/timewait_sock.h>
#include <net/inet_common.h>
#include <net/secure_seq.h>
#include <net/hotdata.h>
#include <net/busy_poll.h>
#include <net/rstreason.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <crypto/hash.h>
#include <linux/scatterlist.h>
#include <trace/events/tcp.h>
static void tcp_v6_send_reset(const struct sock *sk, struct sk_buff *skb,
enum sk_rst_reason reason);
static void tcp_v6_reqsk_send_ack(const struct sock *sk, struct sk_buff *skb,
tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookup If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[<c05cfaa6>] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [<c05d0d86>] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [<c05d28f8>] tcp_check_req+0x156/0x372 [ 302.910082] [<c04250a3>] printk+0x14/0x18 [ 302.912868] [<c05d0aa1>] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [<c05d26be>] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [<c05bb20f>] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [<c05bb10a>] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [<c059e438>] dev_alloc_skb+0x11/0x25 [ 302.931563] [<c05a211f>] netif_receive_skb+0x2d6/0x33a [ 302.934914] [<d0917941>] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [<c05a3b48>] net_rx_action+0x5c/0xfe [ 302.941792] [<c042856b>] __do_softirq+0x5d/0xc1 [ 302.944788] [<c042850e>] __do_softirq+0x0/0xc1 [ 302.948999] [<c040564b>] do_softirq+0x55/0x88 [ 302.951870] [<c04501b1>] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [<c04284da>] irq_exit+0x35/0x69 [ 302.959081] [<c0405717>] do_IRQ+0x99/0xae [ 302.961896] [<c040422b>] common_interrupt+0x23/0x28 [ 302.966279] [<c040819d>] default_idle+0x2a/0x3d [ 302.969212] [<c0402552>] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07 14:50:04 +08:00
struct request_sock *req);
INDIRECT_CALLABLE_SCOPE int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb);
static const struct inet_connection_sock_af_ops ipv6_mapped;
const struct inet_connection_sock_af_ops ipv6_specific;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
static const struct tcp_sock_af_ops tcp_sock_ipv6_specific;
static const struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific;
#endif
/* Helper returning the inet6 address from a given tcp socket.
* It can be used in TCP stack instead of inet6_sk(sk).
* This avoids a dereference and allow compiler optimizations.
* It is a specialized version of inet6_sk_generic().
*/
#define tcp_inet6_sk(sk) (&container_of_const(tcp_sk(sk), \
struct tcp6_sock, tcp)->inet6)
static void inet6_sk_rx_dst_set(struct sock *sk, const struct sk_buff *skb)
{
struct dst_entry *dst = skb_dst(skb);
net: fix IP early demux races David Wilder reported crashes caused by dst reuse. <quote David> I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. </quote> Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by: David J. Wilder <dwilder@us.ibm.com> Tested-by: David J. Wilder <dwilder@us.ibm.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15 06:08:53 +08:00
if (dst && dst_hold_safe(dst)) {
tcp: remove dst refcount false sharing for prequeue mode Alexander Duyck reported high false sharing on dst refcount in tcp stack when prequeue is used. prequeue is the mechanism used when a thread is blocked in recvmsg()/read() on a TCP socket, using a blocking model rather than select()/poll()/epoll() non blocking one. We already try to use RCU in input path as much as possible, but we were forced to take a refcount on the dst when skb escaped RCU protected region. When/if the user thread runs on different cpu, dst_release() will then touch dst refcount again. Commit 093162553c33 (tcp: force a dst refcount when prequeue packet) was an example of a race fix. It turns out the only remaining usage of skb->dst for a packet stored in a TCP socket prequeue is IP early demux. We can add a logic to detect when IP early demux is probably going to use skb->dst. Because we do an optimistic check rather than duplicate existing logic, we need to guard inet_sk_rx_dst_set() and inet6_sk_rx_dst_set() from using a NULL dst. Many thanks to Alexander for providing a nice bug report, git bisection, and reproducer. Tested using Alexander script on a 40Gb NIC, 8 RX queues. Hosts have 24 cores, 48 hyper threads. echo 0 >/proc/sys/net/ipv4/tcp_autocorking for i in `seq 0 47` do for j in `seq 0 2` do netperf -H $DEST -t TCP_STREAM -l 1000 \ -c -C -T $i,$i -P 0 -- \ -m 64 -s 64K -D & done done Before patch : ~6Mpps and ~95% cpu usage on receiver After patch : ~9Mpps and ~35% cpu usage on receiver. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08 23:06:07 +08:00
const struct rt6_info *rt = (const struct rt6_info *)dst;
inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340 ip_route_input_rcu net/ipv4/route.c:2470 [inline] ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Freed by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749 slab_free mm/slub.c:3513 [inline] kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2506 [inline] rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:2985 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065 dst_release net/core/dst.c:177 [inline] dst_release+0x79/0xe0 net/core/dst.c:167 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2768 release_sock+0x54/0x1b0 net/core/sock.c:3300 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x289/0x3c0 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write+0x429/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807f1cb700 which belongs to the cache ip_dst_cache of size 176 The buggy address is located 58 bytes inside of 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0) The buggy address belongs to the page: page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 alloc_slab_page mm/slub.c:1793 [inline] allocate_slab mm/slub.c:1930 [inline] new_slab+0x32d/0x4a0 mm/slub.c:1993 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 slab_alloc_node mm/slub.c:3200 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 __mkroute_output net/ipv4/route.c:2564 [inline] ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850 ip_route_output_key include/net/route.h:142 [inline] geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809 geneve_xmit_skb drivers/net/geneve.c:899 [inline] geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082 __netdev_start_xmit include/linux/netdevice.h:4994 [inline] netdev_start_xmit include/linux/netdevice.h:5008 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline] mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211220143330.680945-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20 22:33:30 +08:00
rcu_assign_pointer(sk->sk_rx_dst, dst);
sk->sk_rx_dst_ifindex = skb->skb_iif;
sk->sk_rx_dst_cookie = rt6_get_cookie(rt);
tcp: remove dst refcount false sharing for prequeue mode Alexander Duyck reported high false sharing on dst refcount in tcp stack when prequeue is used. prequeue is the mechanism used when a thread is blocked in recvmsg()/read() on a TCP socket, using a blocking model rather than select()/poll()/epoll() non blocking one. We already try to use RCU in input path as much as possible, but we were forced to take a refcount on the dst when skb escaped RCU protected region. When/if the user thread runs on different cpu, dst_release() will then touch dst refcount again. Commit 093162553c33 (tcp: force a dst refcount when prequeue packet) was an example of a race fix. It turns out the only remaining usage of skb->dst for a packet stored in a TCP socket prequeue is IP early demux. We can add a logic to detect when IP early demux is probably going to use skb->dst. Because we do an optimistic check rather than duplicate existing logic, we need to guard inet_sk_rx_dst_set() and inet6_sk_rx_dst_set() from using a NULL dst. Many thanks to Alexander for providing a nice bug report, git bisection, and reproducer. Tested using Alexander script on a 40Gb NIC, 8 RX queues. Hosts have 24 cores, 48 hyper threads. echo 0 >/proc/sys/net/ipv4/tcp_autocorking for i in `seq 0 47` do for j in `seq 0 2` do netperf -H $DEST -t TCP_STREAM -l 1000 \ -c -C -T $i,$i -P 0 -- \ -m 64 -s 64K -D & done done Before patch : ~6Mpps and ~95% cpu usage on receiver After patch : ~9Mpps and ~35% cpu usage on receiver. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-08 23:06:07 +08:00
}
}
static u32 tcp_v6_init_seq(const struct sk_buff *skb)
{
return secure_tcpv6_seq(ipv6_hdr(skb)->daddr.s6_addr32,
ipv6_hdr(skb)->saddr.s6_addr32,
tcp_hdr(skb)->dest,
tcp_hdr(skb)->source);
}
static u32 tcp_v6_init_ts_off(const struct net *net, const struct sk_buff *skb)
{
return secure_tcpv6_ts_off(net, ipv6_hdr(skb)->daddr.s6_addr32,
ipv6_hdr(skb)->saddr.s6_addr32);
}
bpf: Hooks for sys_connect == The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:05 +08:00
static int tcp_v6_pre_connect(struct sock *sk, struct sockaddr *uaddr,
int addr_len)
{
/* This check is replicated from tcp_v6_connect() and intended to
* prevent BPF program called below from accessing bytes that are out
* of the bound specified by user in addr_len.
*/
if (addr_len < SIN6_LEN_RFC2133)
return -EINVAL;
sock_owned_by_me(sk);
return BPF_CGROUP_RUN_PROG_INET6_CONNECT(sk, uaddr, &addr_len);
bpf: Hooks for sys_connect == The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:05 +08:00
}
static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
int addr_len)
{
struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr;
struct inet_connection_sock *icsk = inet_csk(sk);
struct in6_addr *saddr = NULL, *final_p, final;
tcp: allocate tcp_death_row outside of struct netns_ipv4 I forgot tcp had per netns tracking of timewait sockets, and their sysctl to change the limit. After 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()"), whole struct net can be freed before last tw socket is freed. We need to allocate a separate struct inet_timewait_death_row object per netns. tw_count becomes a refcount and gains associated debugging infrastructure. BUG: KASAN: use-after-free in inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46 Read of size 8 at addr ffff88807d5f9f40 by task kworker/1:7/3690 CPU: 1 PID: 3690 Comm: kworker/1:7 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events pwq_unbound_release_workfn Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 inet_twsk_kill+0x358/0x3c0 net/ipv4/inet_timewait_sock.c:46 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x67c/0xa30 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:lockdep_unregister_key+0x1c9/0x250 kernel/locking/lockdep.c:6328 Code: 00 00 00 48 89 ee e8 46 fd ff ff 4c 89 f7 e8 5e c9 ff ff e8 09 cc ff ff 9c 58 f6 c4 02 75 26 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c 41 5d 41 5e 41 5f e9 19 4a 08 00 0f 0b 5b 5d 41 5c 41 5d RSP: 0018:ffffc90004077cb8 EFLAGS: 00000206 RAX: 0000000000000046 RBX: ffff88807b61b498 RCX: 0000000000000001 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff888077027128 R08: 0000000000000001 R09: ffffffff8f1ea4fc R10: fffffbfff1ff93ee R11: 000000000000af1e R12: 0000000000000246 R13: 0000000000000000 R14: ffffffff8ffc89b8 R15: ffffffff90157fb0 wq_unregister_lockdep kernel/workqueue.c:3508 [inline] pwq_unbound_release_workfn+0x254/0x340 kernel/workqueue.c:3746 process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307 worker_thread+0x657/0x1110 kernel/workqueue.c:2454 kthread+0x2e9/0x3a0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> Allocated by task 3635: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:437 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:470 kasan_slab_alloc include/linux/kasan.h:260 [inline] slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3230 [inline] slab_alloc mm/slub.c:3238 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3243 kmem_cache_zalloc include/linux/slab.h:705 [inline] net_alloc net/core/net_namespace.c:407 [inline] copy_net_ns+0x125/0x760 net/core/net_namespace.c:462 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3048 __do_sys_unshare kernel/fork.c:3119 [inline] __se_sys_unshare kernel/fork.c:3117 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807d5f9a80 which belongs to the cache net_namespace of size 6528 The buggy address is located 1216 bytes inside of 6528-byte region [ffff88807d5f9a80, ffff88807d5fb400) The buggy address belongs to the page: page:ffffea0001f57e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d5f9a80 pfn:0x7d5f8 head:ffffea0001f57e00 order:3 compound_mapcount:0 compound_pincount:0 memcg:ffff888070023001 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffff888010dd4f48 ffffea0001404e08 ffff8880118fd000 raw: ffff88807d5f9a80 0000000000040002 00000001ffffffff ffff888070023001 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 3634, ts 119694798460, free_ts 119693556950 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab mm/slub.c:1944 [inline] new_slab+0x28a/0x3b0 mm/slub.c:2004 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105 slab_alloc_node mm/slub.c:3196 [inline] slab_alloc mm/slub.c:3238 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3243 kmem_cache_zalloc include/linux/slab.h:705 [inline] net_alloc net/core/net_namespace.c:407 [inline] copy_net_ns+0x125/0x760 net/core/net_namespace.c:462 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3048 __do_sys_unshare kernel/fork.c:3119 [inline] __se_sys_unshare kernel/fork.c:3117 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3117 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 skb_free_head net/core/skbuff.c:655 [inline] skb_release_data+0x65d/0x790 net/core/skbuff.c:677 skb_release_all net/core/skbuff.c:742 [inline] __kfree_skb net/core/skbuff.c:756 [inline] consume_skb net/core/skbuff.c:914 [inline] consume_skb+0xc2/0x160 net/core/skbuff.c:908 skb_free_datagram+0x1b/0x1f0 net/core/datagram.c:325 netlink_recvmsg+0x636/0xea0 net/netlink/af_netlink.c:1998 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff88807d5f9e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807d5f9e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88807d5f9f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807d5f9f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807d5fa000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0dad4087a86a ("tcp/dccp: get rid of inet_twsk_purge()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220126180714.845362-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-27 02:07:14 +08:00
struct inet_timewait_death_row *tcp_death_row;
struct ipv6_pinfo *np = tcp_inet6_sk(sk);
struct inet_sock *inet = inet_sk(sk);
struct tcp_sock *tp = tcp_sk(sk);
struct net *net = sock_net(sk);
struct ipv6_txoptions *opt;
struct dst_entry *dst;
struct flowi6 fl6;
int addr_type;
int err;
if (addr_len < SIN6_LEN_RFC2133)
return -EINVAL;
if (usin->sin6_family != AF_INET6)
return -EAFNOSUPPORT;
memset(&fl6, 0, sizeof(fl6));
if (inet6_test_bit(SNDFLOW, sk)) {
fl6.flowlabel = usin->sin6_flowinfo&IPV6_FLOWINFO_MASK;
IP6_ECN_flow_init(fl6.flowlabel);
if (fl6.flowlabel&IPV6_FLOWLABEL_MASK) {
struct ip6_flowlabel *flowlabel;
flowlabel = fl6_sock_lookup(sk, fl6.flowlabel);
if (IS_ERR(flowlabel))
return -EINVAL;
fl6_sock_release(flowlabel);
}
}
/*
* connect() to INADDR_ANY means loopback (BSD'ism).
*/
if (ipv6_addr_any(&usin->sin6_addr)) {
if (ipv6_addr_v4mapped(&sk->sk_v6_rcv_saddr))
ipv6_addr_set_v4mapped(htonl(INADDR_LOOPBACK),
&usin->sin6_addr);
else
usin->sin6_addr = in6addr_loopback;
}
addr_type = ipv6_addr_type(&usin->sin6_addr);
if (addr_type & IPV6_ADDR_MULTICAST)
return -ENETUNREACH;
if (addr_type&IPV6_ADDR_LINKLOCAL) {
if (addr_len >= sizeof(struct sockaddr_in6) &&
usin->sin6_scope_id) {
/* If interface is set while binding, indices
* must coincide.
*/
if (!sk_dev_equal_l3scope(sk, usin->sin6_scope_id))
return -EINVAL;
sk->sk_bound_dev_if = usin->sin6_scope_id;
}
/* Connect to link-local address requires an interface */
if (!sk->sk_bound_dev_if)
return -EINVAL;
}
if (tp->rx_opt.ts_recent_stamp &&
!ipv6_addr_equal(&sk->sk_v6_daddr, &usin->sin6_addr)) {
tp->rx_opt.ts_recent = 0;
tp->rx_opt.ts_recent_stamp = 0;
WRITE_ONCE(tp->write_seq, 0);
}
sk->sk_v6_daddr = usin->sin6_addr;
np->flow_label = fl6.flowlabel;
/*
* TCP over IPv4
*/
if (addr_type & IPV6_ADDR_MAPPED) {
u32 exthdrlen = icsk->icsk_ext_hdr_len;
struct sockaddr_in sin;
if (ipv6_only_sock(sk))
return -ENETUNREACH;
sin.sin_family = AF_INET;
sin.sin_port = usin->sin6_port;
sin.sin_addr.s_addr = usin->sin6_addr.s6_addr32[3];
tcp: Fix data races around icsk->icsk_af_ops. setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE() for the reads and writes. Thanks to Eric Dumazet for providing the syzbot report: BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0: tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240 __inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660 inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724 __sys_connect_file net/socket.c:1976 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1993 __do_sys_connect net/socket.c:2003 [inline] __se_sys_connect net/socket.c:2000 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:2000 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1: tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585 __sys_setsockopt+0x212/0x2b0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 [inline] __se_sys_setsockopt net/socket.c:2260 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted 6.0.0-rc4-syzkaller-00331-g4ed9c1e971b1-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-07 02:53:49 +08:00
/* Paired with READ_ONCE() in tcp_(get|set)sockopt() */
WRITE_ONCE(icsk->icsk_af_ops, &ipv6_mapped);
if (sk_is_mptcp(sk))
mptcpv6_handle_mapped(sk, true);
sk->sk_backlog_rcv = tcp_v4_do_rcv;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
tp->af_specific = &tcp_sock_ipv6_mapped_specific;
#endif
err = tcp_v4_connect(sk, (struct sockaddr *)&sin, sizeof(sin));
if (err) {
icsk->icsk_ext_hdr_len = exthdrlen;
tcp: Fix data races around icsk->icsk_af_ops. setsockopt(IPV6_ADDRFORM) and tcp_v6_connect() change icsk->icsk_af_ops under lock_sock(), but tcp_(get|set)sockopt() read it locklessly. To avoid load/store tearing, we need to add READ_ONCE() and WRITE_ONCE() for the reads and writes. Thanks to Eric Dumazet for providing the syzbot report: BUG: KCSAN: data-race in tcp_setsockopt / tcp_v6_connect write to 0xffff88813c624518 of 8 bytes by task 23936 on cpu 0: tcp_v6_connect+0x5b3/0xce0 net/ipv6/tcp_ipv6.c:240 __inet_stream_connect+0x159/0x6d0 net/ipv4/af_inet.c:660 inet_stream_connect+0x44/0x70 net/ipv4/af_inet.c:724 __sys_connect_file net/socket.c:1976 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1993 __do_sys_connect net/socket.c:2003 [inline] __se_sys_connect net/socket.c:2000 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:2000 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813c624518 of 8 bytes by task 23937 on cpu 1: tcp_setsockopt+0x147/0x1c80 net/ipv4/tcp.c:3789 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3585 __sys_setsockopt+0x212/0x2b0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 [inline] __se_sys_setsockopt net/socket.c:2260 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffffffff8539af68 -> 0xffffffff8539aff8 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23937 Comm: syz-executor.5 Not tainted 6.0.0-rc4-syzkaller-00331-g4ed9c1e971b1-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-07 02:53:49 +08:00
/* Paired with READ_ONCE() in tcp_(get|set)sockopt() */
WRITE_ONCE(icsk->icsk_af_ops, &ipv6_specific);
if (sk_is_mptcp(sk))
mptcpv6_handle_mapped(sk, false);
sk->sk_backlog_rcv = tcp_v6_do_rcv;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
tp->af_specific = &tcp_sock_ipv6_specific;
#endif
goto failure;
}
np->saddr = sk->sk_v6_rcv_saddr;
return err;
}
if (!ipv6_addr_any(&sk->sk_v6_rcv_saddr))
saddr = &sk->sk_v6_rcv_saddr;
fl6.flowi6_proto = IPPROTO_TCP;
fl6.daddr = sk->sk_v6_daddr;
fl6.saddr = saddr ? *saddr : np->saddr;
fl6.flowlabel = ip6_make_flowinfo(np->tclass, np->flow_label);
fl6.flowi6_oif = sk->sk_bound_dev_if;
fl6.flowi6_mark = sk->sk_mark;
fl6.fl6_dport = usin->sin6_port;
fl6.fl6_sport = inet->inet_sport;
fl6.flowi6_uid = sk->sk_uid;
opt = rcu_dereference_protected(np->opt, lockdep_sock_is_held(sk));
final_p = fl6_update_dst(&fl6, opt, &final);
security_sk_classify_flow(sk, flowi6_to_flowi_common(&fl6));
dst = ip6_dst_lookup_flow(net, sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto failure;
}
tp->tcp_usec_ts = dst_tcp_usec_ts(dst);
tcp_death_row = &sock_net(sk)->ipv4.tcp_death_row;
if (!saddr) {
saddr = &fl6.saddr;
err = inet_bhash2_update_saddr(sk, saddr, AF_INET6);
if (err)
goto failure;
}
/* set the source address */
np->saddr = *saddr;
inet->inet_rcv_saddr = LOOPBACK4_IPV6;
[IPV6]: Added GSO support for TCPv6 This patch adds GSO support for IPv6 and TCPv6. This is based on a patch by Ananda Raju <Ananda.Raju@neterion.com>. His original description is: This patch enables TSO over IPv6. Currently Linux network stacks restricts TSO over IPv6 by clearing of the NETIF_F_TSO bit from "dev->features". This patch will remove this restriction. This patch will introduce a new flag NETIF_F_TSO6 which will be used to check whether device supports TSO over IPv6. If device support TSO over IPv6 then we don't clear of NETIF_F_TSO and which will make the TCP layer to create TSO packets. Any device supporting TSO over IPv6 will set NETIF_F_TSO6 flag in "dev->features" along with NETIF_F_TSO. In case when user disables TSO using ethtool, NETIF_F_TSO will get cleared from "dev->features". So even if we have NETIF_F_TSO6 we don't get TSO packets created by TCP layer. SKB_GSO_TCPV4 renamed to SKB_GSO_TCP to make it generic GSO packet. SKB_GSO_UDPV4 renamed to SKB_GSO_UDP as UFO is not a IPv4 feature. UFO is supported over IPv6 also The following table shows there is significant improvement in throughput with normal frames and CPU usage for both normal and jumbo. -------------------------------------------------- | | 1500 | 9600 | | ------------------|-------------------| | | thru CPU | thru CPU | -------------------------------------------------- | TSO OFF | 2.00 5.5% id | 5.66 20.0% id | -------------------------------------------------- | TSO ON | 2.63 78.0 id | 5.67 39.0% id | -------------------------------------------------- Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-01 04:37:03 +08:00
sk->sk_gso_type = SKB_GSO_TCPV6;
ip6_dst_store(sk, dst, NULL, NULL);
icsk->icsk_ext_hdr_len = 0;
if (opt)
icsk->icsk_ext_hdr_len = opt->opt_flen +
opt->opt_nflen;
tp->rx_opt.mss_clamp = IPV6_MIN_MTU - sizeof(struct tcphdr) - sizeof(struct ipv6hdr);
inet->inet_dport = usin->sin6_port;
tcp_set_state(sk, TCP_SYN_SENT);
err = inet6_hash_connect(tcp_death_row, sk);
if (err)
goto late_failure;
sk_set_txhash(sk);
if (likely(!tp->repair)) {
if (!tp->write_seq)
WRITE_ONCE(tp->write_seq,
secure_tcpv6_seq(np->saddr.s6_addr32,
sk->sk_v6_daddr.s6_addr32,
inet->inet_sport,
inet->inet_dport));
tp->tsoffset = secure_tcpv6_ts_off(net, np->saddr.s6_addr32,
sk->sk_v6_daddr.s6_addr32);
}
net/tcp-fastopen: Add new API support This patch adds a new socket option, TCP_FASTOPEN_CONNECT, as an alternative way to perform Fast Open on the active side (client). Prior to this patch, a client needs to replace the connect() call with sendto(MSG_FASTOPEN). This can be cumbersome for applications who want to use Fast Open: these socket operations are often done in lower layer libraries used by many other applications. Changing these libraries and/or the socket call sequences are not trivial. A more convenient approach is to perform Fast Open by simply enabling a socket option when the socket is created w/o changing other socket calls sequence: s = socket() create a new socket setsockopt(s, IPPROTO_TCP, TCP_FASTOPEN_CONNECT …); newly introduced sockopt If set, new functionality described below will be used. Return ENOTSUPP if TFO is not supported or not enabled in the kernel. connect() With cookie present, return 0 immediately. With no cookie, initiate 3WHS with TFO cookie-request option and return -1 with errno = EINPROGRESS. write()/sendmsg() With cookie present, send out SYN with data and return the number of bytes buffered. With no cookie, and 3WHS not yet completed, return -1 with errno = EINPROGRESS. No MSG_FASTOPEN flag is needed. read() Return -1 with errno = EWOULDBLOCK/EAGAIN if connect() is called but write() is not called yet. Return -1 with errno = EWOULDBLOCK/EAGAIN if connection is established but no msg is received yet. Return number of bytes read if socket is established and there is msg received. The new API simplifies life for applications that always perform a write() immediately after a successful connect(). Such applications can now take advantage of Fast Open by merely making one new setsockopt() call at the time of creating the socket. Nothing else about the application's socket call sequence needs to change. Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24 02:59:22 +08:00
if (tcp_fastopen_defer_connect(sk, &err))
return err;
if (err)
goto late_failure;
err = tcp_connect(sk);
if (err)
goto late_failure;
return 0;
late_failure:
tcp_set_state(sk, TCP_CLOSE);
dccp/tcp: Fixup bhash2 bucket when connect() fails. If a socket bound to a wildcard address fails to connect(), we only reset saddr and keep the port. Then, we have to fix up the bhash2 bucket; otherwise, the bucket has an inconsistent address in the list. Also, listen() for such a socket will fire the WARN_ON() in inet_csk_get_port(). [0] Note that when a system runs out of memory, we give up fixing the bucket and unlink sk from bhash and bhash2 by inet_put_port(). [0]: WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Modules linked in: CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202 RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000 RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280 FS: 00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205) inet_listen (net/ipv4/af_inet.c:228) __sys_listen (net/socket.c:1810) __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f8ac051de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007 R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388 R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000 </TASK> Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19 09:49:14 +08:00
inet_bhash2_reset_saddr(sk);
failure:
inet->inet_dport = 0;
sk->sk_route_caps = 0;
return err;
}
static void tcp_v6_mtu_reduced(struct sock *sk)
{
struct dst_entry *dst;
ipv6: tcp: drop silly ICMPv6 packet too big messages While TCP stack scales reasonably well, there is still one part that can be used to DDOS it. IPv6 Packet too big messages have to lookup/insert a new route, and if abused by attackers, can easily put hosts under high stress, with many cpus contending on a spinlock while one is stuck in fib6_run_gc() ip6_protocol_deliver_rcu() icmpv6_rcv() icmpv6_notify() tcp_v6_err() tcp_v6_mtu_reduced() inet6_csk_update_pmtu() ip6_rt_update_pmtu() __ip6_rt_update_pmtu() ip6_rt_cache_alloc() ip6_dst_alloc() dst_alloc() ip6_dst_gc() fib6_run_gc() spin_lock_bh() ... Some of our servers have been hit by malicious ICMPv6 packets trying to _increase_ the MTU/MSS of TCP flows. We believe these ICMPv6 packets are a result of a bug in one ISP stack, since they were blindly sent back for _every_ (small) packet sent to them. These packets are for one TCP flow: 09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 TCP stack can filter some silly requests : 1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err() 2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS. This tests happen before the IPv6 routing stack is entered, thus removing the potential contention and route exhaustion. Note that IPv6 stack was performing these checks, but too late (ie : after the route has been added, and after the potential garbage collect war) v2: fix typo caught by Martin, thanks ! v3: exports tcp_mtu_to_mss(), caught by David, thanks ! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 15:21:09 +08:00
u32 mtu;
if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE))
return;
ipv6: tcp: drop silly ICMPv6 packet too big messages While TCP stack scales reasonably well, there is still one part that can be used to DDOS it. IPv6 Packet too big messages have to lookup/insert a new route, and if abused by attackers, can easily put hosts under high stress, with many cpus contending on a spinlock while one is stuck in fib6_run_gc() ip6_protocol_deliver_rcu() icmpv6_rcv() icmpv6_notify() tcp_v6_err() tcp_v6_mtu_reduced() inet6_csk_update_pmtu() ip6_rt_update_pmtu() __ip6_rt_update_pmtu() ip6_rt_cache_alloc() ip6_dst_alloc() dst_alloc() ip6_dst_gc() fib6_run_gc() spin_lock_bh() ... Some of our servers have been hit by malicious ICMPv6 packets trying to _increase_ the MTU/MSS of TCP flows. We believe these ICMPv6 packets are a result of a bug in one ISP stack, since they were blindly sent back for _every_ (small) packet sent to them. These packets are for one TCP flow: 09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 TCP stack can filter some silly requests : 1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err() 2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS. This tests happen before the IPv6 routing stack is entered, thus removing the potential contention and route exhaustion. Note that IPv6 stack was performing these checks, but too late (ie : after the route has been added, and after the potential garbage collect war) v2: fix typo caught by Martin, thanks ! v3: exports tcp_mtu_to_mss(), caught by David, thanks ! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 15:21:09 +08:00
mtu = READ_ONCE(tcp_sk(sk)->mtu_info);
/* Drop requests trying to increase our current mss.
* Check done in __ip6_rt_update_pmtu() is too late.
*/
if (tcp_mtu_to_mss(sk, mtu) >= tcp_sk(sk)->mss_cache)
return;
dst = inet6_csk_update_pmtu(sk, mtu);
if (!dst)
return;
if (inet_csk(sk)->icsk_pmtu_cookie > dst_mtu(dst)) {
tcp_sync_mss(sk, dst_mtu(dst));
tcp_simple_retransmit(sk);
}
}
static int tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
u8 type, u8 code, int offset, __be32 info)
{
const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data;
const struct tcphdr *th = (struct tcphdr *)(skb->data+offset);
struct net *net = dev_net(skb->dev);
struct request_sock *fastopen;
struct ipv6_pinfo *np;
struct tcp_sock *tp;
__u32 seq, snd_una;
struct sock *sk;
tcp: Revert no longer abort SYN_SENT when receiving some ICMP This reverts commit 0a8de364ff7a14558e9676f424283148110384d6. Shachar reported that Vagrant (https://www.vagrantup.com/), which is very popular tool to manage fleet of VMs stopped to work after commit citied in Fixes line. The issue appears while using Vagrant to manage nested VMs. The steps are: * create vagrant file * vagrant up * vagrant halt (VM is created but shut down) * vagrant up - fail Vagrant up stdout: Bringing machine 'player1' up with 'libvirt' provider... ==> player1: Creating shared folders metadata... ==> player1: Starting domain. ==> player1: Domain launching with graphics connection settings... ==> player1: -- Graphics Port: 5900 ==> player1: -- Graphics IP: 127.0.0.1 ==> player1: -- Graphics Password: Not defined ==> player1: -- Graphics Websocket: 5700 ==> player1: Waiting for domain to get an IP address... ==> player1: Waiting for machine to boot. This may take a few minutes... player1: SSH address: 192.168.123.61:22 player1: SSH username: vagrant player1: SSH auth method: private key ==> player1: Attempting graceful shutdown of VM... ==> player1: Attempting graceful shutdown of VM... ==> player1: Attempting graceful shutdown of VM... player1: Guest communication could not be established! This is usually because player1: SSH is not running, the authentication information was changed, player1: or some other networking issue. Vagrant will force halt, if player1: capable. ==> player1: Attempting direct shutdown of domain... Fixes: 0a8de364ff7a ("tcp: no longer abort SYN_SENT when receiving some ICMP") Closes: https://lore.kernel.org/all/MN2PR12MB44863139E562A59329E89DBEB982A@MN2PR12MB4486.namprd12.prod.outlook.com Signed-off-by: Shachar Kagan <skagan@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/14459261ea9f9c7d7dfb28eb004ce8734fa83ade.1704185904.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 17:00:57 +08:00
bool fatal;
int err;
sk = __inet6_lookup_established(net, net->ipv4.tcp_death_row.hashinfo,
&hdr->daddr, th->dest,
&hdr->saddr, ntohs(th->source),
skb->dev->ifindex, inet6_sdif(skb));
if (!sk) {
__ICMP6_INC_STATS(net, __in6_dev_get(skb->dev),
ICMP6_MIB_INERRORS);
return -ENOENT;
}
if (sk->sk_state == TCP_TIME_WAIT) {
/* To increase the counter of ignored icmps for TCP-AO */
tcp_ao_ignore_icmp(sk, AF_INET6, type, code);
inet_twsk_put(inet_twsk(sk));
return 0;
}
seq = ntohl(th->seq);
tcp: Revert no longer abort SYN_SENT when receiving some ICMP This reverts commit 0a8de364ff7a14558e9676f424283148110384d6. Shachar reported that Vagrant (https://www.vagrantup.com/), which is very popular tool to manage fleet of VMs stopped to work after commit citied in Fixes line. The issue appears while using Vagrant to manage nested VMs. The steps are: * create vagrant file * vagrant up * vagrant halt (VM is created but shut down) * vagrant up - fail Vagrant up stdout: Bringing machine 'player1' up with 'libvirt' provider... ==> player1: Creating shared folders metadata... ==> player1: Starting domain. ==> player1: Domain launching with graphics connection settings... ==> player1: -- Graphics Port: 5900 ==> player1: -- Graphics IP: 127.0.0.1 ==> player1: -- Graphics Password: Not defined ==> player1: -- Graphics Websocket: 5700 ==> player1: Waiting for domain to get an IP address... ==> player1: Waiting for machine to boot. This may take a few minutes... player1: SSH address: 192.168.123.61:22 player1: SSH username: vagrant player1: SSH auth method: private key ==> player1: Attempting graceful shutdown of VM... ==> player1: Attempting graceful shutdown of VM... ==> player1: Attempting graceful shutdown of VM... player1: Guest communication could not be established! This is usually because player1: SSH is not running, the authentication information was changed, player1: or some other networking issue. Vagrant will force halt, if player1: capable. ==> player1: Attempting direct shutdown of domain... Fixes: 0a8de364ff7a ("tcp: no longer abort SYN_SENT when receiving some ICMP") Closes: https://lore.kernel.org/all/MN2PR12MB44863139E562A59329E89DBEB982A@MN2PR12MB4486.namprd12.prod.outlook.com Signed-off-by: Shachar Kagan <skagan@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/14459261ea9f9c7d7dfb28eb004ce8734fa83ade.1704185904.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 17:00:57 +08:00
fatal = icmpv6_err_convert(type, code, &err);
if (sk->sk_state == TCP_NEW_SYN_RECV) {
tcp: Revert no longer abort SYN_SENT when receiving some ICMP This reverts commit 0a8de364ff7a14558e9676f424283148110384d6. Shachar reported that Vagrant (https://www.vagrantup.com/), which is very popular tool to manage fleet of VMs stopped to work after commit citied in Fixes line. The issue appears while using Vagrant to manage nested VMs. The steps are: * create vagrant file * vagrant up * vagrant halt (VM is created but shut down) * vagrant up - fail Vagrant up stdout: Bringing machine 'player1' up with 'libvirt' provider... ==> player1: Creating shared folders metadata... ==> player1: Starting domain. ==> player1: Domain launching with graphics connection settings... ==> player1: -- Graphics Port: 5900 ==> player1: -- Graphics IP: 127.0.0.1 ==> player1: -- Graphics Password: Not defined ==> player1: -- Graphics Websocket: 5700 ==> player1: Waiting for domain to get an IP address... ==> player1: Waiting for machine to boot. This may take a few minutes... player1: SSH address: 192.168.123.61:22 player1: SSH username: vagrant player1: SSH auth method: private key ==> player1: Attempting graceful shutdown of VM... ==> player1: Attempting graceful shutdown of VM... ==> player1: Attempting graceful shutdown of VM... player1: Guest communication could not be established! This is usually because player1: SSH is not running, the authentication information was changed, player1: or some other networking issue. Vagrant will force halt, if player1: capable. ==> player1: Attempting direct shutdown of domain... Fixes: 0a8de364ff7a ("tcp: no longer abort SYN_SENT when receiving some ICMP") Closes: https://lore.kernel.org/all/MN2PR12MB44863139E562A59329E89DBEB982A@MN2PR12MB4486.namprd12.prod.outlook.com Signed-off-by: Shachar Kagan <skagan@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/14459261ea9f9c7d7dfb28eb004ce8734fa83ade.1704185904.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02 17:00:57 +08:00
tcp_req_err(sk, seq, fatal);
return 0;
}
if (tcp_ao_ignore_icmp(sk, AF_INET6, type, code)) {
sock_put(sk);
return 0;
}
bh_lock_sock(sk);
if (sock_owned_by_user(sk) && type != ICMPV6_PKT_TOOBIG)
__NET_INC_STATS(net, LINUX_MIB_LOCKDROPPEDICMPS);
if (sk->sk_state == TCP_CLOSE)
goto out;
if (static_branch_unlikely(&ip6_min_hopcount)) {
/* min_hopcount can be changed concurrently from do_ipv6_setsockopt() */
if (ipv6_hdr(skb)->hop_limit < READ_ONCE(tcp_inet6_sk(sk)->min_hopcount)) {
__NET_INC_STATS(net, LINUX_MIB_TCPMINTTLDROP);
goto out;
}
}
tp = tcp_sk(sk);
/* XXX (TFO) - tp->snd_una should be ISN (tcp_create_openreq_child() */
fastopen = rcu_dereference(tp->fastopen_rsk);
snd_una = fastopen ? tcp_rsk(fastopen)->snt_isn : tp->snd_una;
if (sk->sk_state != TCP_LISTEN &&
!between(seq, snd_una, tp->snd_nxt)) {
__NET_INC_STATS(net, LINUX_MIB_OUTOFWINDOWICMPS);
goto out;
}
np = tcp_inet6_sk(sk);
if (type == NDISC_REDIRECT) {
dccp/tcp: fix routing redirect race As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-10 13:40:33 +08:00
if (!sock_owned_by_user(sk)) {
struct dst_entry *dst = __sk_dst_check(sk, np->dst_cookie);
dccp/tcp: fix routing redirect race As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320610d6 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <egarver@redhat.com> Cc: Hannes Sowa <hsowa@redhat.com> Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-10 13:40:33 +08:00
if (dst)
dst->ops->redirect(dst, sk, skb);
}
goto out;
}
if (type == ICMPV6_PKT_TOOBIG) {
ipv6: tcp: drop silly ICMPv6 packet too big messages While TCP stack scales reasonably well, there is still one part that can be used to DDOS it. IPv6 Packet too big messages have to lookup/insert a new route, and if abused by attackers, can easily put hosts under high stress, with many cpus contending on a spinlock while one is stuck in fib6_run_gc() ip6_protocol_deliver_rcu() icmpv6_rcv() icmpv6_notify() tcp_v6_err() tcp_v6_mtu_reduced() inet6_csk_update_pmtu() ip6_rt_update_pmtu() __ip6_rt_update_pmtu() ip6_rt_cache_alloc() ip6_dst_alloc() dst_alloc() ip6_dst_gc() fib6_run_gc() spin_lock_bh() ... Some of our servers have been hit by malicious ICMPv6 packets trying to _increase_ the MTU/MSS of TCP flows. We believe these ICMPv6 packets are a result of a bug in one ISP stack, since they were blindly sent back for _every_ (small) packet sent to them. These packets are for one TCP flow: 09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 TCP stack can filter some silly requests : 1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err() 2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS. This tests happen before the IPv6 routing stack is entered, thus removing the potential contention and route exhaustion. Note that IPv6 stack was performing these checks, but too late (ie : after the route has been added, and after the potential garbage collect war) v2: fix typo caught by Martin, thanks ! v3: exports tcp_mtu_to_mss(), caught by David, thanks ! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 15:21:09 +08:00
u32 mtu = ntohl(info);
/* We are not interested in TCP_LISTEN and open_requests
* (SYN-ACKs send out by Linux are always <576bytes so
* they should go through unfragmented).
*/
if (sk->sk_state == TCP_LISTEN)
goto out;
if (!ip6_sk_accept_pmtu(sk))
goto out;
ipv6: tcp: drop silly ICMPv6 packet too big messages While TCP stack scales reasonably well, there is still one part that can be used to DDOS it. IPv6 Packet too big messages have to lookup/insert a new route, and if abused by attackers, can easily put hosts under high stress, with many cpus contending on a spinlock while one is stuck in fib6_run_gc() ip6_protocol_deliver_rcu() icmpv6_rcv() icmpv6_notify() tcp_v6_err() tcp_v6_mtu_reduced() inet6_csk_update_pmtu() ip6_rt_update_pmtu() __ip6_rt_update_pmtu() ip6_rt_cache_alloc() ip6_dst_alloc() dst_alloc() ip6_dst_gc() fib6_run_gc() spin_lock_bh() ... Some of our servers have been hit by malicious ICMPv6 packets trying to _increase_ the MTU/MSS of TCP flows. We believe these ICMPv6 packets are a result of a bug in one ISP stack, since they were blindly sent back for _every_ (small) packet sent to them. These packets are for one TCP flow: 09:24:36.266491 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.266509 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316688 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.316704 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 09:24:36.608151 IP6 Addr1 > Victim ICMP6, packet too big, mtu 1460, length 1240 TCP stack can filter some silly requests : 1) MTU below IPV6_MIN_MTU can be filtered early in tcp_v6_err() 2) tcp_v6_mtu_reduced() can drop requests trying to increase current MSS. This tests happen before the IPv6 routing stack is entered, thus removing the potential contention and route exhaustion. Note that IPv6 stack was performing these checks, but too late (ie : after the route has been added, and after the potential garbage collect war) v2: fix typo caught by Martin, thanks ! v3: exports tcp_mtu_to_mss(), caught by David, thanks ! Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08 15:21:09 +08:00
if (mtu < IPV6_MIN_MTU)
goto out;
WRITE_ONCE(tp->mtu_info, mtu);
if (!sock_owned_by_user(sk))
tcp_v6_mtu_reduced(sk);
else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED,
&sk->sk_tsq_flags))
sock_hold(sk);
goto out;
}
/* Might be for an request_sock */
switch (sk->sk_state) {
case TCP_SYN_SENT:
case TCP_SYN_RECV:
/* Only in fast or simultaneous open. If a fast open socket is
* already accepted it is treated as a connected one below.
*/
if (fastopen && !fastopen->sk)
break;
tcp: allow traceroute -Mtcp for unpriv users Unpriv users can use traceroute over plain UDP sockets, but not TCP ones. $ traceroute -Mtcp 8.8.8.8 You do not have enough privileges to use this traceroute method. $ traceroute -n -Mudp 8.8.8.8 traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets 1 192.168.86.1 3.631 ms 3.512 ms 3.405 ms 2 10.1.10.1 4.183 ms 4.125 ms 4.072 ms 3 96.120.88.125 20.621 ms 19.462 ms 20.553 ms 4 96.110.177.65 24.271 ms 25.351 ms 25.250 ms 5 69.139.199.197 44.492 ms 43.075 ms 44.346 ms 6 68.86.143.93 27.969 ms 25.184 ms 25.092 ms 7 96.112.146.18 25.323 ms 96.112.146.22 25.583 ms 96.112.146.26 24.502 ms 8 72.14.239.204 24.405 ms 74.125.37.224 16.326 ms 17.194 ms 9 209.85.251.9 18.154 ms 209.85.247.55 14.449 ms 209.85.251.9 26.296 ms^C We can easily support traceroute over TCP, by queueing an error message into socket error queue. Note that applications need to set IP_RECVERR/IPV6_RECVERR option to enable this feature, and that the error message is only queued while in SYN_SNT state. socket(AF_INET6, SOCK_STREAM, IPPROTO_IP) = 3 setsockopt(3, SOL_IPV6, IPV6_RECVERR, [1], 4) = 0 setsockopt(3, SOL_SOCKET, SO_TIMESTAMP_OLD, [1], 4) = 0 setsockopt(3, SOL_IPV6, IPV6_UNICAST_HOPS, [5], 4) = 0 connect(3, {sa_family=AF_INET6, sin6_port=htons(8787), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "2002:a05:6608:297::", &sin6_addr), sin6_scope_id=0}, 28) = -1 EHOSTUNREACH (No route to host) recvmsg(3, {msg_name={sa_family=AF_INET6, sin6_port=htons(8787), sin6_flowinfo=htonl(0), inet_pton(AF_INET6, "2002:a05:6608:297::", &sin6_addr), sin6_scope_id=0}, msg_namelen=1024->28, msg_iov=[{iov_base="`\r\337\320\0004\6\1&\7\370\260\200\231\16\27\0\0\0\0\0\0\0\0 \2\n\5f\10\2\227"..., iov_len=1024}], msg_iovlen=1, msg_control=[{cmsg_len=32, cmsg_level=SOL_SOCKET, cmsg_type=SO_TIMESTAMP_OLD, cmsg_data={tv_sec=1590340680, tv_usec=272424}}, {cmsg_len=60, cmsg_level=SOL_IPV6, cmsg_type=IPV6_RECVERR}], msg_controllen=96, msg_flags=MSG_ERRQUEUE}, MSG_ERRQUEUE) = 144 Suggested-by: Maciej Żenczykowski <maze@google.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25 02:00:02 +08:00
ipv6_icmp_error(sk, skb, err, th->dest, ntohl(info), (u8 *)th);
if (!sock_owned_by_user(sk)) {
WRITE_ONCE(sk->sk_err, err);
sk_error_report(sk); /* Wake people up to see the error (see connect in sock.c) */
tcp_done(sk);
} else {
WRITE_ONCE(sk->sk_err_soft, err);
}
goto out;
case TCP_LISTEN:
break;
default:
/* check if this ICMP message allows revert of backoff.
* (see RFC 6069)
*/
if (!fastopen && type == ICMPV6_DEST_UNREACH &&
code == ICMPV6_NOROUTE)
tcp_ld_RTO_revert(sk, seq);
}
if (!sock_owned_by_user(sk) && inet6_test_bit(RECVERR6, sk)) {
WRITE_ONCE(sk->sk_err, err);
sk_error_report(sk);
} else {
WRITE_ONCE(sk->sk_err_soft, err);
}
out:
bh_unlock_sock(sk);
sock_put(sk);
return 0;
}
static int tcp_v6_send_synack(const struct sock *sk, struct dst_entry *dst,
struct flowi *fl,
struct request_sock *req,
struct tcp_fastopen_cookie *foc,
bpf: tcp: Add bpf_skops_hdr_opt_len() and bpf_skops_write_hdr_opt() The bpf prog needs to parse the SYN header to learn what options have been sent by the peer's bpf-prog before writing its options into SYNACK. This patch adds a "syn_skb" arg to tcp_make_synack() and send_synack(). This syn_skb will eventually be made available (as read-only) to the bpf prog. This will be the only SYN packet available to the bpf prog during syncookie. For other regular cases, the bpf prog can also use the saved_syn. When writing options, the bpf prog will first be called to tell the kernel its required number of bytes. It is done by the new bpf_skops_hdr_opt_len(). The bpf prog will only be called when the new BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG is set in tp->bpf_sock_ops_cb_flags. When the bpf prog returns, the kernel will know how many bytes are needed and then update the "*remaining" arg accordingly. 4 byte alignment will be included in the "*remaining" before this function returns. The 4 byte aligned number of bytes will also be stored into the opts->bpf_opt_len. "bpf_opt_len" is a newly added member to the struct tcp_out_options. Then the new bpf_skops_write_hdr_opt() will call the bpf prog to write the header options. The bpf prog is only called if it has reserved spaces before (opts->bpf_opt_len > 0). The bpf prog is the last one getting a chance to reserve header space and writing the header option. These two functions are half implemented to highlight the changes in TCP stack. The actual codes preparing the bpf running context and invoking the bpf prog will be added in the later patch with other necessary bpf pieces. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20200820190052.2885316-1-kafai@fb.com
2020-08-21 03:00:52 +08:00
enum tcp_synack_type synack_type,
struct sk_buff *syn_skb)
{
struct inet_request_sock *ireq = inet_rsk(req);
const struct ipv6_pinfo *np = tcp_inet6_sk(sk);
struct ipv6_txoptions *opt;
struct flowi6 *fl6 = &fl->u.ip6;
struct sk_buff *skb;
int err = -ENOMEM;
u8 tclass;
/* First, grab a route. */
if (!dst && (dst = inet6_csk_route_req(sk, fl6, req,
IPPROTO_TCP)) == NULL)
goto done;
bpf: tcp: Add bpf_skops_hdr_opt_len() and bpf_skops_write_hdr_opt() The bpf prog needs to parse the SYN header to learn what options have been sent by the peer's bpf-prog before writing its options into SYNACK. This patch adds a "syn_skb" arg to tcp_make_synack() and send_synack(). This syn_skb will eventually be made available (as read-only) to the bpf prog. This will be the only SYN packet available to the bpf prog during syncookie. For other regular cases, the bpf prog can also use the saved_syn. When writing options, the bpf prog will first be called to tell the kernel its required number of bytes. It is done by the new bpf_skops_hdr_opt_len(). The bpf prog will only be called when the new BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG is set in tp->bpf_sock_ops_cb_flags. When the bpf prog returns, the kernel will know how many bytes are needed and then update the "*remaining" arg accordingly. 4 byte alignment will be included in the "*remaining" before this function returns. The 4 byte aligned number of bytes will also be stored into the opts->bpf_opt_len. "bpf_opt_len" is a newly added member to the struct tcp_out_options. Then the new bpf_skops_write_hdr_opt() will call the bpf prog to write the header options. The bpf prog is only called if it has reserved spaces before (opts->bpf_opt_len > 0). The bpf prog is the last one getting a chance to reserve header space and writing the header option. These two functions are half implemented to highlight the changes in TCP stack. The actual codes preparing the bpf running context and invoking the bpf prog will be added in the later patch with other necessary bpf pieces. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20200820190052.2885316-1-kafai@fb.com
2020-08-21 03:00:52 +08:00
skb = tcp_make_synack(sk, dst, req, foc, synack_type, syn_skb);
if (skb) {
__tcp_v6_send_check(skb, &ireq->ir_v6_loc_addr,
&ireq->ir_v6_rmt_addr);
fl6->daddr = ireq->ir_v6_rmt_addr;
if (inet6_test_bit(REPFLOW, sk) && ireq->pktopts)
fl6->flowlabel = ip6_flowlabel(ipv6_hdr(ireq->pktopts));
tclass = READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos) ?
(tcp_rsk(req)->syn_tos & ~INET_ECN_MASK) |
(np->tclass & INET_ECN_MASK) :
np->tclass;
if (!INET_ECN_is_capable(tclass) &&
tcp_bpf_ca_needs_ecn((struct sock *)req))
tclass |= INET_ECN_ECT_0;
rcu_read_lock();
opt = ireq->ipv6_opt;
if (!opt)
opt = rcu_dereference(np->opt);
err = ip6_xmit(sk, skb, fl6, skb->mark ? : READ_ONCE(sk->sk_mark),
opt, tclass, READ_ONCE(sk->sk_priority));
rcu_read_unlock();
err = net_xmit_eval(err);
}
done:
return err;
}
static void tcp_v6_reqsk_destructor(struct request_sock *req)
{
kfree(inet_rsk(req)->ipv6_opt);
consume_skb(inet_rsk(req)->pktopts);
}
#ifdef CONFIG_TCP_MD5SIG
static struct tcp_md5sig_key *tcp_v6_md5_do_lookup(const struct sock *sk,
const struct in6_addr *addr,
int l3index)
{
return tcp_md5_do_lookup(sk, l3index,
(union tcp_md5_addr *)addr, AF_INET6);
}
static struct tcp_md5sig_key *tcp_v6_md5_lookup(const struct sock *sk,
const struct sock *addr_sk)
{
int l3index;
l3index = l3mdev_master_ifindex_by_index(sock_net(sk),
addr_sk->sk_bound_dev_if);
return tcp_v6_md5_do_lookup(sk, &addr_sk->sk_v6_daddr,
l3index);
}
static int tcp_v6_parse_md5_keys(struct sock *sk, int optname,
sockptr_t optval, int optlen)
{
struct tcp_md5sig cmd;
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)&cmd.tcpm_addr;
union tcp_ao_addr *addr;
int l3index = 0;
u8 prefixlen;
net/tcp: Wire up l3index to TCP-AO Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:22:13 +08:00
bool l3flag;
u8 flags;
if (optlen < sizeof(cmd))
return -EINVAL;
if (copy_from_sockptr(&cmd, optval, sizeof(cmd)))
return -EFAULT;
if (sin6->sin6_family != AF_INET6)
return -EINVAL;
flags = cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX;
net/tcp: Wire up l3index to TCP-AO Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:22:13 +08:00
l3flag = cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX;
if (optname == TCP_MD5SIG_EXT &&
cmd.tcpm_flags & TCP_MD5SIG_FLAG_PREFIX) {
prefixlen = cmd.tcpm_prefixlen;
if (prefixlen > 128 || (ipv6_addr_v4mapped(&sin6->sin6_addr) &&
prefixlen > 32))
return -EINVAL;
} else {
prefixlen = ipv6_addr_v4mapped(&sin6->sin6_addr) ? 32 : 128;
}
if (optname == TCP_MD5SIG_EXT && cmd.tcpm_ifindex &&
cmd.tcpm_flags & TCP_MD5SIG_FLAG_IFINDEX) {
struct net_device *dev;
rcu_read_lock();
dev = dev_get_by_index_rcu(sock_net(sk), cmd.tcpm_ifindex);
if (dev && netif_is_l3_master(dev))
l3index = dev->ifindex;
rcu_read_unlock();
/* ok to reference set/not set outside of rcu;
* right now device MUST be an L3 master
*/
if (!dev || !l3index)
return -EINVAL;
}
if (!cmd.tcpm_keylen) {
if (ipv6_addr_v4mapped(&sin6->sin6_addr))
return tcp_md5_do_del(sk, (union tcp_md5_addr *)&sin6->sin6_addr.s6_addr32[3],
AF_INET, prefixlen,
l3index, flags);
return tcp_md5_do_del(sk, (union tcp_md5_addr *)&sin6->sin6_addr,
AF_INET6, prefixlen, l3index, flags);
}
if (cmd.tcpm_keylen > TCP_MD5SIG_MAXKEYLEN)
return -EINVAL;
if (ipv6_addr_v4mapped(&sin6->sin6_addr)) {
addr = (union tcp_md5_addr *)&sin6->sin6_addr.s6_addr32[3];
/* Don't allow keys for peers that have a matching TCP-AO key.
* See the comment in tcp_ao_add_cmd()
*/
net/tcp: Wire up l3index to TCP-AO Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:22:13 +08:00
if (tcp_ao_required(sk, addr, AF_INET,
l3flag ? l3index : -1, false))
return -EKEYREJECTED;
return tcp_md5_do_add(sk, addr,
AF_INET, prefixlen, l3index, flags,
cmd.tcpm_key, cmd.tcpm_keylen);
}
addr = (union tcp_md5_addr *)&sin6->sin6_addr;
/* Don't allow keys for peers that have a matching TCP-AO key.
* See the comment in tcp_ao_add_cmd()
*/
net/tcp: Wire up l3index to TCP-AO Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:22:13 +08:00
if (tcp_ao_required(sk, addr, AF_INET6, l3flag ? l3index : -1, false))
return -EKEYREJECTED;
return tcp_md5_do_add(sk, addr, AF_INET6, prefixlen, l3index, flags,
cmd.tcpm_key, cmd.tcpm_keylen);
}
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
static int tcp_v6_md5_hash_headers(struct tcp_sigpool *hp,
const struct in6_addr *daddr,
const struct in6_addr *saddr,
const struct tcphdr *th, int nbytes)
{
struct tcp6_pseudohdr *bp;
struct scatterlist sg;
struct tcphdr *_th;
bp = hp->scratch;
/* 1. TCP pseudo-header (RFC2460) */
bp->saddr = *saddr;
bp->daddr = *daddr;
bp->protocol = cpu_to_be32(IPPROTO_TCP);
bp->len = cpu_to_be32(nbytes);
_th = (struct tcphdr *)(bp + 1);
memcpy(_th, th, sizeof(*th));
_th->check = 0;
sg_init_one(&sg, bp, sizeof(*bp) + sizeof(*th));
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
ahash_request_set_crypt(hp->req, &sg, NULL,
sizeof(*bp) + sizeof(*th));
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
return crypto_ahash_update(hp->req);
}
static int tcp_v6_md5_hash_hdr(char *md5_hash, const struct tcp_md5sig_key *key,
const struct in6_addr *daddr, struct in6_addr *saddr,
const struct tcphdr *th)
{
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
struct tcp_sigpool hp;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_sigpool_start(tcp_md5_sigpool_id, &hp))
goto clear_hash_nostart;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (crypto_ahash_init(hp.req))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_v6_md5_hash_headers(&hp, daddr, saddr, th, th->doff << 2))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_md5_hash_key(&hp, key))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
if (crypto_ahash_final(hp.req))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
tcp_sigpool_end(&hp);
return 0;
clear_hash:
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
tcp_sigpool_end(&hp);
clear_hash_nostart:
memset(md5_hash, 0, 16);
return 1;
}
static int tcp_v6_md5_hash_skb(char *md5_hash,
const struct tcp_md5sig_key *key,
const struct sock *sk,
const struct sk_buff *skb)
{
const struct tcphdr *th = tcp_hdr(skb);
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
const struct in6_addr *saddr, *daddr;
struct tcp_sigpool hp;
if (sk) { /* valid for establish/request sockets */
saddr = &sk->sk_v6_rcv_saddr;
daddr = &sk->sk_v6_daddr;
} else {
const struct ipv6hdr *ip6h = ipv6_hdr(skb);
saddr = &ip6h->saddr;
daddr = &ip6h->daddr;
}
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_sigpool_start(tcp_md5_sigpool_id, &hp))
goto clear_hash_nostart;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (crypto_ahash_init(hp.req))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_v6_md5_hash_headers(&hp, daddr, saddr, th, skb->len))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_sigpool_hash_skb_data(&hp, skb, th->doff << 2))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
if (tcp_md5_hash_key(&hp, key))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
if (crypto_ahash_final(hp.req))
goto clear_hash;
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
tcp_sigpool_end(&hp);
return 0;
clear_hash:
net/tcp: Prepare tcp_md5sig_pool for TCP-AO TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-ao Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:21:53 +08:00
tcp_sigpool_end(&hp);
clear_hash_nostart:
memset(md5_hash, 0, 16);
return 1;
}
#endif
static void tcp_v6_init_req(struct request_sock *req,
const struct sock *sk_listener,
struct sk_buff *skb,
u32 tw_isn)
{
bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags);
struct inet_request_sock *ireq = inet_rsk(req);
const struct ipv6_pinfo *np = tcp_inet6_sk(sk_listener);
ireq->ir_v6_rmt_addr = ipv6_hdr(skb)->saddr;
ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
/* So that link locals have meaning */
if ((!sk_listener->sk_bound_dev_if || l3_slave) &&
ipv6_addr_type(&ireq->ir_v6_rmt_addr) & IPV6_ADDR_LINKLOCAL)
ireq->ir_iif = tcp_v6_iif(skb);
if (!tw_isn &&
(ipv6_opt_accepted(sk_listener, skb, &TCP_SKB_CB(skb)->header.h6) ||
np->rxopt.bits.rxinfo ||
np->rxopt.bits.rxoinfo || np->rxopt.bits.rxhlim ||
np->rxopt.bits.rxohlim || inet6_test_bit(REPFLOW, sk_listener))) {
refcount_inc(&skb->users);
ireq->pktopts = skb;
}
}
static struct dst_entry *tcp_v6_route_req(const struct sock *sk,
struct sk_buff *skb,
struct flowi *fl,
struct request_sock *req,
u32 tw_isn)
{
tcp_v6_init_req(req, sk, skb, tw_isn);
if (security_inet_conn_request(sk, skb, req))
return NULL;
return inet6_csk_route_req(sk, &fl->u.ip6, req, IPPROTO_TCP);
}
struct request_sock_ops tcp6_request_sock_ops __read_mostly = {
.family = AF_INET6,
.obj_size = sizeof(struct tcp6_request_sock),
.rtx_syn_ack = tcp_rtx_synack,
.send_ack = tcp_v6_reqsk_send_ack,
.destructor = tcp_v6_reqsk_destructor,
.send_reset = tcp_v6_send_reset,
.syn_ack_timeout = tcp_syn_ack_timeout,
};
const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
.mss_clamp = IPV6_MIN_MTU - sizeof(struct tcphdr) -
sizeof(struct ipv6hdr),
#ifdef CONFIG_TCP_MD5SIG
.req_md5_lookup = tcp_v6_md5_lookup,
.calc_md5_hash = tcp_v6_md5_hash_skb,
#endif
#ifdef CONFIG_TCP_AO
.ao_lookup = tcp_v6_ao_lookup_rsk,
.ao_calc_key = tcp_v6_ao_calc_key_rsk,
.ao_synack_hash = tcp_v6_ao_synack_hash,
#endif
#ifdef CONFIG_SYN_COOKIES
.cookie_init_seq = cookie_v6_init_sequence,
#endif
.route_req = tcp_v6_route_req,
.init_seq = tcp_v6_init_seq,
.init_ts_off = tcp_v6_init_ts_off,
.send_synack = tcp_v6_send_synack,
};
static void tcp_v6_send_response(const struct sock *sk, struct sk_buff *skb, u32 seq,
u32 ack, u32 win, u32 tsval, u32 tsecr,
int oif, int rst, u8 tclass, __be32 label,
u32 priority, u32 txhash, struct tcp_key *key)
{
const struct tcphdr *th = tcp_hdr(skb);
struct tcphdr *t1;
struct sk_buff *buff;
struct flowi6 fl6;
struct net *net = sk ? sock_net(sk) : dev_net(skb_dst(skb)->dev);
struct sock *ctl_sk = net->ipv6.tcp_sk;
unsigned int tot_len = sizeof(struct tcphdr);
__be32 mrst = 0, *topt;
struct dst_entry *dst;
__u32 mark = 0;
if (tsecr)
tot_len += TCPOLEN_TSTAMP_ALIGNED;
if (tcp_key_is_md5(key))
tot_len += TCPOLEN_MD5SIG_ALIGNED;
if (tcp_key_is_ao(key))
tot_len += tcp_ao_len_aligned(key->ao_key);
#ifdef CONFIG_MPTCP
if (rst && !tcp_key_is_md5(key)) {
mrst = mptcp_reset_option(skb);
if (mrst)
tot_len += sizeof(__be32);
}
#endif
buff = alloc_skb(MAX_TCP_HEADER, GFP_ATOMIC);
if (!buff)
return;
skb_reserve(buff, MAX_TCP_HEADER);
t1 = skb_push(buff, tot_len);
skb_reset_transport_header(buff);
/* Swap the send and the receive. */
memset(t1, 0, sizeof(*t1));
t1->dest = th->source;
t1->source = th->dest;
t1->doff = tot_len / 4;
t1->seq = htonl(seq);
t1->ack_seq = htonl(ack);
t1->ack = !rst || !th->ack;
t1->rst = rst;
t1->window = htons(win);
tcpv6: convert opt[] -> topt in tcp_v6_send_reset after this I get: $ diff-funcs tcp_v6_send_reset tcp_ipv6.c tcp_ipv6.c tcp_v6_send_ack --- tcp_ipv6.c:tcp_v6_send_reset() +++ tcp_ipv6.c:tcp_v6_send_ack() @@ -1,4 +1,5 @@ -static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb) +static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 ts, + struct tcp_md5sig_key *key) { struct tcphdr *th = tcp_hdr(skb), *t1; struct sk_buff *buff; @@ -7,31 +8,14 @@ struct sock *ctl_sk = net->ipv6.tcp_sk; unsigned int tot_len = sizeof(struct tcphdr); __be32 *topt; -#ifdef CONFIG_TCP_MD5SIG - struct tcp_md5sig_key *key; -#endif - - if (th->rst) - return; - - if (!ipv6_unicast_destination(skb)) - return; + if (ts) + tot_len += TCPOLEN_TSTAMP_ALIGNED; #ifdef CONFIG_TCP_MD5SIG - if (sk) - key = tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr); - else - key = NULL; - if (key) tot_len += TCPOLEN_MD5SIG_ALIGNED; #endif - /* - * We need to grab some memory, and put together an RST, - * and then put it into the queue to be sent. - */ - buff = alloc_skb(MAX_HEADER + sizeof(struct ipv6hdr) + tot_len, GFP_ATOMIC); if (buff == NULL) @@ -46,18 +30,20 @@ t1->dest = th->source; t1->source = th->dest; t1->doff = tot_len / 4; - t1->rst = 1; - - if(th->ack) { - t1->seq = th->ack_seq; - } else { - t1->ack = 1; - t1->ack_seq = htonl(ntohl(th->seq) + th->syn + th->fin - + skb->len - (th->doff<<2)); - } + t1->seq = htonl(seq); + t1->ack_seq = htonl(ack); + t1->ack = 1; + t1->window = htons(win); topt = (__be32 *)(t1 + 1); + if (ts) { + *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | + (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); + *topt++ = htonl(tcp_time_stamp); + *topt++ = htonl(ts); + } + #ifdef CONFIG_TCP_MD5SIG if (key) { *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | @@ -84,15 +70,10 @@ fl.fl_ip_sport = t1->source; security_skb_classify_flow(skb, &fl); - /* Pass a socket to ip6_dst_lookup either it is for RST - * Underlying function will use this to retrieve the network - * namespace - */ if (!ip6_dst_lookup(ctl_sk, &buff->dst, &fl)) { if (xfrm_lookup(&buff->dst, &fl, NULL, 0) >= 0) { ip6_xmit(ctl_sk, buff, &fl, NULL, 0); TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS); - TCP_INC_STATS_BH(net, TCP_MIB_OUTRSTS); return; } } ...which starts to be trivial to combine. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10 05:42:01 +08:00
topt = (__be32 *)(t1 + 1);
if (tsecr) {
*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
(TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
*topt++ = htonl(tsval);
*topt++ = htonl(tsecr);
}
if (mrst)
*topt++ = mrst;
#ifdef CONFIG_TCP_MD5SIG
if (tcp_key_is_md5(key)) {
tcpv6: convert opt[] -> topt in tcp_v6_send_reset after this I get: $ diff-funcs tcp_v6_send_reset tcp_ipv6.c tcp_ipv6.c tcp_v6_send_ack --- tcp_ipv6.c:tcp_v6_send_reset() +++ tcp_ipv6.c:tcp_v6_send_ack() @@ -1,4 +1,5 @@ -static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb) +static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 ts, + struct tcp_md5sig_key *key) { struct tcphdr *th = tcp_hdr(skb), *t1; struct sk_buff *buff; @@ -7,31 +8,14 @@ struct sock *ctl_sk = net->ipv6.tcp_sk; unsigned int tot_len = sizeof(struct tcphdr); __be32 *topt; -#ifdef CONFIG_TCP_MD5SIG - struct tcp_md5sig_key *key; -#endif - - if (th->rst) - return; - - if (!ipv6_unicast_destination(skb)) - return; + if (ts) + tot_len += TCPOLEN_TSTAMP_ALIGNED; #ifdef CONFIG_TCP_MD5SIG - if (sk) - key = tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr); - else - key = NULL; - if (key) tot_len += TCPOLEN_MD5SIG_ALIGNED; #endif - /* - * We need to grab some memory, and put together an RST, - * and then put it into the queue to be sent. - */ - buff = alloc_skb(MAX_HEADER + sizeof(struct ipv6hdr) + tot_len, GFP_ATOMIC); if (buff == NULL) @@ -46,18 +30,20 @@ t1->dest = th->source; t1->source = th->dest; t1->doff = tot_len / 4; - t1->rst = 1; - - if(th->ack) { - t1->seq = th->ack_seq; - } else { - t1->ack = 1; - t1->ack_seq = htonl(ntohl(th->seq) + th->syn + th->fin - + skb->len - (th->doff<<2)); - } + t1->seq = htonl(seq); + t1->ack_seq = htonl(ack); + t1->ack = 1; + t1->window = htons(win); topt = (__be32 *)(t1 + 1); + if (ts) { + *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | + (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP); + *topt++ = htonl(tcp_time_stamp); + *topt++ = htonl(ts); + } + #ifdef CONFIG_TCP_MD5SIG if (key) { *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | @@ -84,15 +70,10 @@ fl.fl_ip_sport = t1->source; security_skb_classify_flow(skb, &fl); - /* Pass a socket to ip6_dst_lookup either it is for RST - * Underlying function will use this to retrieve the network - * namespace - */ if (!ip6_dst_lookup(ctl_sk, &buff->dst, &fl)) { if (xfrm_lookup(&buff->dst, &fl, NULL, 0) >= 0) { ip6_xmit(ctl_sk, buff, &fl, NULL, 0); TCP_INC_STATS_BH(net, TCP_MIB_OUTSEGS); - TCP_INC_STATS_BH(net, TCP_MIB_OUTRSTS); return; } } ...which starts to be trivial to combine. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-10 05:42:01 +08:00
*topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
(TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
tcp_v6_md5_hash_hdr((__u8 *)topt, key->md5_key,
&ipv6_hdr(skb)->saddr,
&ipv6_hdr(skb)->daddr, t1);
}
#endif
#ifdef CONFIG_TCP_AO
if (tcp_key_is_ao(key)) {
*topt++ = htonl((TCPOPT_AO << 24) |
(tcp_ao_len(key->ao_key) << 16) |
(key->ao_key->sndid << 8) |
(key->rcv_next));
tcp_ao_hash_hdr(AF_INET6, (char *)topt, key->ao_key,
key->traffic_key,
(union tcp_ao_addr *)&ipv6_hdr(skb)->saddr,
(union tcp_ao_addr *)&ipv6_hdr(skb)->daddr,
t1, key->sne);
}
#endif
memset(&fl6, 0, sizeof(fl6));
fl6.daddr = ipv6_hdr(skb)->saddr;
fl6.saddr = ipv6_hdr(skb)->daddr;
fl6.flowlabel = label;
buff->ip_summed = CHECKSUM_PARTIAL;
__tcp_v6_send_check(buff, &fl6.saddr, &fl6.daddr);
fl6.flowi6_proto = IPPROTO_TCP;
if (rt6_need_strict(&fl6.daddr) && !oif)
fl6.flowi6_oif = tcp_v6_iif(skb);
else {
if (!oif && netif_index_is_l3_master(net, skb->skb_iif))
oif = skb->skb_iif;
fl6.flowi6_oif = oif;
}
if (sk) {
if (sk->sk_state == TCP_TIME_WAIT)
mark = inet_twsk(sk)->tw_mark;
else
mark = READ_ONCE(sk->sk_mark);
net: Add skb->mono_delivery_time to distinguish mono delivery_time from (rcv) timestamp skb->tstamp was first used as the (rcv) timestamp. The major usage is to report it to the user (e.g. SO_TIMESTAMP). Later, skb->tstamp is also set as the (future) delivery_time (e.g. EDT in TCP) during egress and used by the qdisc (e.g. sch_fq) to make decision on when the skb can be passed to the dev. Currently, there is no way to tell skb->tstamp having the (rcv) timestamp or the delivery_time, so it is always reset to 0 whenever forwarded between egress and ingress. While it makes sense to always clear the (rcv) timestamp in skb->tstamp to avoid confusing sch_fq that expects the delivery_time, it is a performance issue [0] to clear the delivery_time if the skb finally egress to a fq@phy-dev. For example, when forwarding from egress to ingress and then finally back to egress: tcp-sender => veth@netns => veth@hostns => fq@eth0@hostns ^ ^ reset rest This patch adds one bit skb->mono_delivery_time to flag the skb->tstamp is storing the mono delivery_time (EDT) instead of the (rcv) timestamp. The current use case is to keep the TCP mono delivery_time (EDT) and to be used with sch_fq. A latter patch will also allow tc-bpf@ingress to read and change the mono delivery_time. In the future, another bit (e.g. skb->user_delivery_time) can be added for the SCM_TXTIME where the clock base is tracked by sk->sk_clockid. [ This patch is a prep work. The following patches will get the other parts of the stack ready first. Then another patch after that will finally set the skb->mono_delivery_time. ] skb_set_delivery_time() function is added. It is used by the tcp_output.c and during ip[6] fragmentation to assign the delivery_time to the skb->tstamp and also set the skb->mono_delivery_time. A note on the change in ip_send_unicast_reply() in ip_output.c. It is only used by TCP to send reset/ack out of a ctl_sk. Like the new skb_set_delivery_time(), this patch sets the skb->mono_delivery_time to 0 for now as a place holder. It will be enabled in a latter patch. A similar case in tcp_ipv6 can be done with skb_set_delivery_time() in tcp_v6_send_response(). [0] (slide 22): https://linuxplumbersconf.org/event/11/contributions/953/attachments/867/1658/LPC_2021_BPF_Datapath_Extensions.pdf Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03 03:55:25 +08:00
skb_set_delivery_time(buff, tcp_transmit_time(sk), true);
}
if (txhash) {
/* autoflowlabel/skb_get_hash_flowi6 rely on buff->hash */
skb_set_hash(buff, txhash, PKT_HASH_TYPE_L4);
}
fl6.flowi6_mark = IP6_REPLY_MARK(net, skb->mark) ?: mark;
fl6.fl6_dport = t1->dest;
fl6.fl6_sport = t1->source;
fl6.flowi6_uid = sock_net_uid(net, sk && sk_fullsock(sk) ? sk : NULL);
security_skb_classify_flow(skb, flowi6_to_flowi_common(&fl6));
/* Pass a socket to ip6_dst_lookup either it is for RST
* Underlying function will use this to retrieve the network
* namespace
*/
net: Find dst with sk's xfrm policy not ctl_sk If we set XFRM security policy by calling setsockopt with option IPV6_XFRM_POLICY, the policy will be stored in 'sock_policy' in 'sock' struct. However tcp_v6_send_response doesn't look up dst_entry with the actual socket but looks up with tcp control socket. This may cause a problem that a RST packet is sent without ESP encryption & peer's TCP socket can't receive it. This patch will make the function look up dest_entry with actual socket, if the socket has XFRM policy(sock_policy), so that the TCP response packet via this function can be encrypted, & aligned on the encrypted TCP socket. Tested: We encountered this problem when a TCP socket which is encrypted in ESP transport mode encryption, receives challenge ACK at SYN_SENT state. After receiving challenge ACK, TCP needs to send RST to establish the socket at next SYN try. But the RST was not encrypted & peer TCP socket still remains on ESTABLISHED state. So we verified this with test step as below. [Test step] 1. Making a TCP state mismatch between client(IDLE) & server(ESTABLISHED). 2. Client tries a new connection on the same TCP ports(src & dst). 3. Server will return challenge ACK instead of SYN,ACK. 4. Client will send RST to server to clear the SOCKET. 5. Client will retransmit SYN to server on the same TCP ports. [Expected result] The TCP connection should be established. Cc: Maciej Żenczykowski <maze@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Sehee Lee <seheele@google.com> Signed-off-by: Sewook Seo <sewookseo@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-07 18:01:39 +08:00
if (sk && sk->sk_state != TCP_TIME_WAIT)
dst = ip6_dst_lookup_flow(net, sk, &fl6, NULL); /*sk's xfrm_policy can be referred*/
else
dst = ip6_dst_lookup_flow(net, ctl_sk, &fl6, NULL);
if (!IS_ERR(dst)) {
skb_dst_set(buff, dst);
ip6_xmit(ctl_sk, buff, &fl6, fl6.flowi6_mark, NULL,
tclass & ~INET_ECN_MASK, priority);
TCP_INC_STATS(net, TCP_MIB_OUTSEGS);
if (rst)
TCP_INC_STATS(net, TCP_MIB_OUTRSTS);
return;
}
kfree_skb(buff);
}
static void tcp_v6_send_reset(const struct sock *sk, struct sk_buff *skb,
enum sk_rst_reason reason)
{
const struct tcphdr *th = tcp_hdr(skb);
struct ipv6hdr *ipv6h = ipv6_hdr(skb);
const __u8 *md5_hash_location = NULL;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
bool allocated_traffic_key = false;
#endif
const struct tcp_ao_hdr *aoh;
struct tcp_key key = {};
u32 seq = 0, ack_seq = 0;
__be32 label = 0;
u32 priority = 0;
struct net *net;
u32 txhash = 0;
int oif = 0;
#ifdef CONFIG_TCP_MD5SIG
unsigned char newhash[16];
int genhash;
struct sock *sk1 = NULL;
#endif
if (th->rst)
return;
/* If sk not NULL, it means we did a successful lookup and incoming
* route had to be correct. prequeue might have dropped our dst.
*/
if (!sk && !ipv6_unicast_destination(skb))
return;
net = sk ? sock_net(sk) : dev_net(skb_dst(skb)->dev);
/* Invalid TCP option size or twice included auth */
if (tcp_parse_auth_options(th, &md5_hash_location, &aoh))
return;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
rcu_read_lock();
#endif
#ifdef CONFIG_TCP_MD5SIG
if (sk && sk_fullsock(sk)) {
int l3index;
/* sdif set, means packet ingressed via a device
* in an L3 domain and inet_iif is set to it.
*/
l3index = tcp_v6_sdif(skb) ? tcp_v6_iif_l3_slave(skb) : 0;
key.md5_key = tcp_v6_md5_do_lookup(sk, &ipv6h->saddr, l3index);
if (key.md5_key)
key.type = TCP_KEY_MD5;
} else if (md5_hash_location) {
int dif = tcp_v6_iif_l3_slave(skb);
int sdif = tcp_v6_sdif(skb);
int l3index;
/*
* active side is lost. Try to find listening socket through
* source port, and then find md5 key through listening socket.
* we are not loose security here:
* Incoming packet is checked with md5 hash with finding key,
* no RST generated if md5 hash doesn't match.
*/
sk1 = inet6_lookup_listener(net, net->ipv4.tcp_death_row.hashinfo,
NULL, 0, &ipv6h->saddr, th->source,
&ipv6h->daddr, ntohs(th->source),
dif, sdif);
if (!sk1)
goto out;
/* sdif set, means packet ingressed via a device
* in an L3 domain and dif is set to it.
*/
l3index = tcp_v6_sdif(skb) ? dif : 0;
key.md5_key = tcp_v6_md5_do_lookup(sk1, &ipv6h->saddr, l3index);
if (!key.md5_key)
goto out;
key.type = TCP_KEY_MD5;
genhash = tcp_v6_md5_hash_skb(newhash, key.md5_key, NULL, skb);
if (genhash || memcmp(md5_hash_location, newhash, 16) != 0)
goto out;
}
#endif
if (th->ack)
seq = ntohl(th->ack_seq);
else
ack_seq = ntohl(th->seq) + th->syn + th->fin + skb->len -
(th->doff << 2);
#ifdef CONFIG_TCP_AO
if (aoh) {
int l3index;
l3index = tcp_v6_sdif(skb) ? tcp_v6_iif_l3_slave(skb) : 0;
if (tcp_ao_prepare_reset(sk, skb, aoh, l3index, seq,
&key.ao_key, &key.traffic_key,
&allocated_traffic_key,
&key.rcv_next, &key.sne))
goto out;
key.type = TCP_KEY_AO;
}
#endif
if (sk) {
oif = sk->sk_bound_dev_if;
if (sk_fullsock(sk)) {
if (inet6_test_bit(REPFLOW, sk))
label = ip6_flowlabel(ipv6h);
priority = READ_ONCE(sk->sk_priority);
txhash = sk->sk_txhash;
}
if (sk->sk_state == TCP_TIME_WAIT) {
label = cpu_to_be32(inet_twsk(sk)->tw_flowlabel);
priority = inet_twsk(sk)->tw_priority;
txhash = inet_twsk(sk)->tw_txhash;
}
} else {
if (net->ipv6.sysctl.flowlabel_reflect & FLOWLABEL_REFLECT_TCP_RESET)
label = ip6_flowlabel(ipv6h);
}
trace_tcp_send_reset(sk, skb);
tcp_v6_send_response(sk, skb, seq, ack_seq, 0, 0, 0, oif, 1,
ipv6_get_dsfield(ipv6h), label, priority, txhash,
&key);
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
out:
if (allocated_traffic_key)
kfree(key.traffic_key);
rcu_read_unlock();
#endif
}
static void tcp_v6_send_ack(const struct sock *sk, struct sk_buff *skb, u32 seq,
u32 ack, u32 win, u32 tsval, u32 tsecr, int oif,
struct tcp_key *key, u8 tclass,
__be32 label, u32 priority, u32 txhash)
{
tcp_v6_send_response(sk, skb, seq, ack, win, tsval, tsecr, oif, 0,
tclass, label, priority, txhash, key);
}
static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb)
{
struct inet_timewait_sock *tw = inet_twsk(sk);
struct tcp_timewait_sock *tcptw = tcp_twsk(sk);
struct tcp_key key = {};
#ifdef CONFIG_TCP_AO
struct tcp_ao_info *ao_info;
if (static_branch_unlikely(&tcp_ao_needed.key)) {
/* FIXME: the segment to-be-acked is not verified yet */
ao_info = rcu_dereference(tcptw->ao_info);
if (ao_info) {
const struct tcp_ao_hdr *aoh;
/* Invalid TCP option size or twice included auth */
if (tcp_parse_auth_options(tcp_hdr(skb), NULL, &aoh))
goto out;
if (aoh)
key.ao_key = tcp_ao_established_key(ao_info,
aoh->rnext_keyid, -1);
}
}
if (key.ao_key) {
struct tcp_ao_key *rnext_key;
key.traffic_key = snd_other_key(key.ao_key);
/* rcv_next switches to our rcv_next */
rnext_key = READ_ONCE(ao_info->rnext_key);
key.rcv_next = rnext_key->rcvid;
key.sne = READ_ONCE(ao_info->snd_sne);
key.type = TCP_KEY_AO;
#else
if (0) {
#endif
#ifdef CONFIG_TCP_MD5SIG
} else if (static_branch_unlikely(&tcp_md5_needed.key)) {
key.md5_key = tcp_twsk_md5_key(tcptw);
if (key.md5_key)
key.type = TCP_KEY_MD5;
#endif
}
tcp_v6_send_ack(sk, skb, tcptw->tw_snd_nxt, tcptw->tw_rcv_nxt,
tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale,
tcp_tw_tsval(tcptw),
tcptw->tw_ts_recent, tw->tw_bound_dev_if, &key,
tw->tw_tclass, cpu_to_be32(tw->tw_flowlabel), tw->tw_priority,
tw->tw_txhash);
#ifdef CONFIG_TCP_AO
out:
#endif
inet_twsk_put(tw);
}
static void tcp_v6_reqsk_send_ack(const struct sock *sk, struct sk_buff *skb,
tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookup If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[<c05cfaa6>] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [<c05d0d86>] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [<c05d28f8>] tcp_check_req+0x156/0x372 [ 302.910082] [<c04250a3>] printk+0x14/0x18 [ 302.912868] [<c05d0aa1>] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [<c05d26be>] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [<c05bb20f>] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [<c05bb10a>] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [<c059e438>] dev_alloc_skb+0x11/0x25 [ 302.931563] [<c05a211f>] netif_receive_skb+0x2d6/0x33a [ 302.934914] [<d0917941>] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [<c05a3b48>] net_rx_action+0x5c/0xfe [ 302.941792] [<c042856b>] __do_softirq+0x5d/0xc1 [ 302.944788] [<c042850e>] __do_softirq+0x0/0xc1 [ 302.948999] [<c040564b>] do_softirq+0x55/0x88 [ 302.951870] [<c04501b1>] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [<c04284da>] irq_exit+0x35/0x69 [ 302.959081] [<c0405717>] do_IRQ+0x99/0xae [ 302.961896] [<c040422b>] common_interrupt+0x23/0x28 [ 302.966279] [<c040819d>] default_idle+0x2a/0x3d [ 302.969212] [<c0402552>] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [<c05cfaa6>] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-07 14:50:04 +08:00
struct request_sock *req)
{
struct tcp_key key = {};
#ifdef CONFIG_TCP_AO
if (static_branch_unlikely(&tcp_ao_needed.key) &&
tcp_rsk_used_ao(req)) {
const struct in6_addr *addr = &ipv6_hdr(skb)->saddr;
const struct tcp_ao_hdr *aoh;
int l3index;
l3index = tcp_v6_sdif(skb) ? tcp_v6_iif_l3_slave(skb) : 0;
/* Invalid TCP option size or twice included auth */
if (tcp_parse_auth_options(tcp_hdr(skb), NULL, &aoh))
return;
if (!aoh)
return;
net/tcp: Wire up l3index to TCP-AO Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:22:13 +08:00
key.ao_key = tcp_ao_do_lookup(sk, l3index,
(union tcp_ao_addr *)addr,
AF_INET6, aoh->rnext_keyid, -1);
if (unlikely(!key.ao_key)) {
/* Send ACK with any matching MKT for the peer */
net/tcp: Wire up l3index to TCP-AO Similarly how TCP_MD5SIG_FLAG_IFINDEX works for TCP-MD5, TCP_AO_KEYF_IFINDEX is an AO-key flag that binds that MKT to a specified by L3 ifinndex. Similarly, without this flag the key will work in the default VRF l3index = 0 for connections. To prevent AO-keys from overlapping, it's restricted to add key B for a socket that has key A, which have the same sndid/rcvid and one of the following is true: - !(A.keyflags & TCP_AO_KEYF_IFINDEX) or !(B.keyflags & TCP_AO_KEYF_IFINDEX) so that any key is non-bound to a VRF - A.l3index == B.l3index both want to work for the same VRF Additionally, it's restricted to match TCP-MD5 keys for the same peer the following way: |--------------|--------------------|----------------|---------------| | | MD5 key without | MD5 key | MD5 key | | | l3index | l3index=0 | l3index=N | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | without | reject | reject | reject | | l3index | | | | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=0 | reject | reject | allow | |--------------|--------------------|----------------|---------------| | TCP-AO key | | | | | l3index=N | reject | allow | reject | |--------------|--------------------|----------------|---------------| This is done with the help of tcp_md5_do_lookup_any_l3index() to reject adding AO key without TCP_AO_KEYF_IFINDEX if there's TCP-MD5 in any VRF. This is important for case where sysctl_tcp_l3mdev_accept = 1 Similarly, for TCP-AO lookups tcp_ao_do_lookup() may be used with l3index < 0, so that __tcp_ao_key_cmp() will match TCP-AO key in any VRF. Signed-off-by: Dmitry Safonov <dima@arista.com> Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-24 03:22:13 +08:00
key.ao_key = tcp_ao_do_lookup(sk, l3index,
(union tcp_ao_addr *)addr,
AF_INET6, -1, -1);
/* Matching key disappeared (user removed the key?)
* let the handshake timeout.
*/
if (!key.ao_key) {
net_info_ratelimited("TCP-AO key for (%pI6, %d)->(%pI6, %d) suddenly disappeared, won't ACK new connection\n",
addr,
ntohs(tcp_hdr(skb)->source),
&ipv6_hdr(skb)->daddr,
ntohs(tcp_hdr(skb)->dest));
return;
}
}
key.traffic_key = kmalloc(tcp_ao_digest_size(key.ao_key), GFP_ATOMIC);
if (!key.traffic_key)
return;
key.type = TCP_KEY_AO;
key.rcv_next = aoh->keyid;
tcp_v6_ao_calc_key_rsk(key.ao_key, key.traffic_key, req);
#else
if (0) {
#endif
#ifdef CONFIG_TCP_MD5SIG
} else if (static_branch_unlikely(&tcp_md5_needed.key)) {
int l3index = tcp_v6_sdif(skb) ? tcp_v6_iif_l3_slave(skb) : 0;
key.md5_key = tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->saddr,
l3index);
if (key.md5_key)
key.type = TCP_KEY_MD5;
#endif
}
/* sk->sk_state == TCP_LISTEN -> for regular TCP_SYN_RECV
* sk->sk_state == TCP_SYN_RECV -> for Fast Open.
*/
/* RFC 7323 2.3
* The window field (SEG.WND) of every outgoing segment, with the
* exception of <SYN> segments, MUST be right-shifted by
* Rcv.Wind.Shift bits:
*/
tcp_v6_send_ack(sk, skb, (sk->sk_state == TCP_LISTEN) ?
tcp_rsk(req)->snt_isn + 1 : tcp_sk(sk)->snd_nxt,
tcp_rsk(req)->rcv_nxt,
req->rsk_rcv_wnd >> inet_rsk(req)->rcv_wscale,
tcp_rsk_tsval(tcp_rsk(req)),
tcp: annotate data-races around tcp_rsk(req)->ts_recent TCP request sockets are lockless, tcp_rsk(req)->ts_recent can change while being read by another cpu as syzbot noticed. This is harmless, but we should annotate the known races. Note that tcp_check_req() changes req->ts_recent a bit early, we might change this in the future. BUG: KCSAN: data-race in tcp_check_req / tcp_check_req write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1: tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762 tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071 ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:303 [inline] ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:468 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5493 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607 process_backlog+0x21f/0x380 net/core/dev.c:5935 __napi_poll+0x60/0x3b0 net/core/dev.c:6498 napi_poll net/core/dev.c:6565 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6698 __do_softirq+0xc1/0x265 kernel/softirq.c:571 do_softirq+0x7e/0xb0 kernel/softirq.c:472 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396 local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33 rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline] __dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_hh_output include/net/neighbour.h:528 [inline] neigh_output include/net/neighbour.h:542 [inline] ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229 ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431 dst_output include/net/dst.h:458 [inline] ip_local_out net/ipv4/ip_output.c:126 [inline] __ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533 ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547 __tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693 __tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877 tcp_push_pending_frames include/net/tcp.h:1952 [inline] __tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline] tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343 rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52 rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422 rds_send_worker+0x42/0x1d0 net/rds/threads.c:200 process_one_work+0x3e6/0x750 kernel/workqueue.c:2408 worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555 kthread+0x1d7/0x210 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0: tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622 tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071 ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:303 [inline] ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:468 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5493 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607 process_backlog+0x21f/0x380 net/core/dev.c:5935 __napi_poll+0x60/0x3b0 net/core/dev.c:6498 napi_poll net/core/dev.c:6565 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6698 __do_softirq+0xc1/0x265 kernel/softirq.c:571 run_ksoftirqd+0x17/0x20 kernel/softirq.c:939 smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164 kthread+0x1d7/0x210 kernel/kthread.c:379 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 value changed: 0x1cd237f1 -> 0x1cd237f2 Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230717144445.653164-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-17 22:44:45 +08:00
READ_ONCE(req->ts_recent), sk->sk_bound_dev_if,
&key, ipv6_get_dsfield(ipv6_hdr(skb)), 0,
READ_ONCE(sk->sk_priority),
tcp: annotate data-races around tcp_rsk(req)->txhash TCP request sockets are lockless, some of their fields can change while being read by another cpu as syzbot noticed. This is usually harmless, but we should annotate the known races. This patch takes care of tcp_rsk(req)->txhash, a separate one is needed for tcp_rsk(req)->ts_recent. BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1: tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213 inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880 tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665 tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673 ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437 ip6_input_finish net/ipv6/ip6_input.c:482 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:303 [inline] ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core net/core/dev.c:5452 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566 netif_receive_skb_internal net/core/dev.c:5652 [inline] netif_receive_skb+0x4a/0x310 net/core/dev.c:5711 tun_rx_batched+0x3bf/0x400 tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997 tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x4ab/0x7d0 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0: tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663 tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544 tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059 tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175 tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494 tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509 tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735 ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437 ip6_input_finish net/ipv6/ip6_input.c:482 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:303 [inline] ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core net/core/dev.c:5452 [inline] __netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566 netif_receive_skb_internal net/core/dev.c:5652 [inline] netif_receive_skb+0x4a/0x310 net/core/dev.c:5711 tun_rx_batched+0x3bf/0x400 tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997 tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x4ab/0x7d0 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x91d25731 -> 0xe79325cd Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023 Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-17 22:44:44 +08:00
READ_ONCE(tcp_rsk(req)->txhash));
if (tcp_key_is_ao(&key))
kfree(key.traffic_key);
}
static struct sock *tcp_v6_cookie_check(struct sock *sk, struct sk_buff *skb)
{
#ifdef CONFIG_SYN_COOKIES
const struct tcphdr *th = tcp_hdr(skb);
if (!th->syn)
sk = cookie_v6_check(sk, skb);
#endif
return sk;
}
u16 tcp_v6_get_syncookie(struct sock *sk, struct ipv6hdr *iph,
struct tcphdr *th, u32 *cookie)
{
u16 mss = 0;
#ifdef CONFIG_SYN_COOKIES
mss = tcp_get_syncookie_mss(&tcp6_request_sock_ops,
&tcp_request_sock_ipv6_ops, sk, th);
if (mss) {
*cookie = __cookie_v6_init_sequence(iph, th, &mss);
tcp_synq_overflow(sk);
}
#endif
return mss;
}
static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
{
if (skb->protocol == htons(ETH_P_IP))
return tcp_v4_conn_request(sk, skb);
if (!ipv6_unicast_destination(skb))
goto drop;
if (ipv6_addr_v4mapped(&ipv6_hdr(skb)->saddr)) {
__IP6_INC_STATS(sock_net(sk), NULL, IPSTATS_MIB_INHDRERRORS);
return 0;
}
return tcp_conn_request(&tcp6_request_sock_ops,
&tcp_request_sock_ipv6_ops, sk, skb);
drop:
tcp_listendrop(sk);
return 0; /* don't send reset */
}
static void tcp_v6_restore_cb(struct sk_buff *skb)
{
/* We need to move header back to the beginning if xfrm6_policy_check()
* and tcp_v6_fill_cb() are going to be called again.
* ip6_datagram_recv_specific_ctl() also expects IP6CB to be there.
*/
memmove(IP6CB(skb), &TCP_SKB_CB(skb)->header.h6,
sizeof(struct inet6_skb_parm));
}
static struct sock *tcp_v6_syn_recv_sock(const struct sock *sk, struct sk_buff *skb,
struct request_sock *req,
struct dst_entry *dst,
struct request_sock *req_unhash,
bool *own_req)
{
struct inet_request_sock *ireq;
struct ipv6_pinfo *newnp;
const struct ipv6_pinfo *np = tcp_inet6_sk(sk);
struct ipv6_txoptions *opt;
struct inet_sock *newinet;
tcp: fix race condition when creating child sockets from syncookies When the TCP stack is in SYN flood mode, the server child socket is created from the SYN cookie received in a TCP packet with the ACK flag set. The child socket is created when the server receives the first TCP packet with a valid SYN cookie from the client. Usually, this packet corresponds to the final step of the TCP 3-way handshake, the ACK packet. But is also possible to receive a valid SYN cookie from the first TCP data packet sent by the client, and thus create a child socket from that SYN cookie. Since a client socket is ready to send data as soon as it receives the SYN+ACK packet from the server, the client can send the ACK packet (sent by the TCP stack code), and the first data packet (sent by the userspace program) almost at the same time, and thus the server will equally receive the two TCP packets with valid SYN cookies almost at the same instant. When such event happens, the TCP stack code has a race condition that occurs between the momement a lookup is done to the established connections hashtable to check for the existence of a connection for the same client, and the moment that the child socket is added to the established connections hashtable. As a consequence, this race condition can lead to a situation where we add two child sockets to the established connections hashtable and deliver two sockets to the userspace program to the same client. This patch fixes the race condition by checking if an existing child socket exists for the same client when we are adding the second child socket to the established connections socket. If an existing child socket exists, we drop the packet and discard the second child socket to the same client. Signed-off-by: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20 19:11:33 +08:00
bool found_dup_sk = false;
struct tcp_sock *newtp;
struct sock *newsk;
#ifdef CONFIG_TCP_MD5SIG
struct tcp_md5sig_key *key;
int l3index;
#endif
struct flowi6 fl6;
if (skb->protocol == htons(ETH_P_IP)) {
/*
* v6 mapped
*/
newsk = tcp_v4_syn_recv_sock(sk, skb, req, dst,
req_unhash, own_req);
if (!newsk)
return NULL;
inet_sk(newsk)->pinet6 = tcp_inet6_sk(newsk);
newnp = tcp_inet6_sk(newsk);
newtp = tcp_sk(newsk);
memcpy(newnp, np, sizeof(struct ipv6_pinfo));
newnp->saddr = newsk->sk_v6_rcv_saddr;
inet_csk(newsk)->icsk_af_ops = &ipv6_mapped;
if (sk_is_mptcp(newsk))
mptcpv6_handle_mapped(newsk, true);
newsk->sk_backlog_rcv = tcp_v4_do_rcv;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
newtp->af_specific = &tcp_sock_ipv6_mapped_specific;
#endif
newnp->ipv6_mc_list = NULL;
newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
newnp->pktoptions = NULL;
newnp->opt = NULL;
newnp->mcast_oif = inet_iif(skb);
newnp->mcast_hops = ip_hdr(skb)->ttl;
newnp->rcv_flowinfo = 0;
if (inet6_test_bit(REPFLOW, sk))
newnp->flow_label = 0;
/*
* No need to charge this sock to the relevant IPv6 refcnt debug socks count
* here, tcp_create_openreq_child now does this for us, see the comment in
* that function for the gory details. -acme
*/
/* It is tricky place. Until this moment IPv4 tcp
worked with IPv6 icsk.icsk_af_ops.
Sync it now.
*/
tcp_sync_mss(newsk, inet_csk(newsk)->icsk_pmtu_cookie);
return newsk;
}
ireq = inet_rsk(req);
if (sk_acceptq_is_full(sk))
goto out_overflow;
if (!dst) {
dst = inet6_csk_route_req(sk, &fl6, req, IPPROTO_TCP);
if (!dst)
goto out;
}
newsk = tcp_create_openreq_child(sk, req, skb);
if (!newsk)
goto out_nonewsk;
/*
* No need to charge this sock to the relevant IPv6 refcnt debug socks
* count here, tcp_create_openreq_child now does this for us, see the
* comment in that function for the gory details. -acme
*/
newsk->sk_gso_type = SKB_GSO_TCPV6;
ip6_dst_store(newsk, dst, NULL, NULL);
inet6_sk_rx_dst_set(newsk, skb);
inet_sk(newsk)->pinet6 = tcp_inet6_sk(newsk);
newtp = tcp_sk(newsk);
newinet = inet_sk(newsk);
newnp = tcp_inet6_sk(newsk);
memcpy(newnp, np, sizeof(struct ipv6_pinfo));
newsk->sk_v6_daddr = ireq->ir_v6_rmt_addr;
newnp->saddr = ireq->ir_v6_loc_addr;
newsk->sk_v6_rcv_saddr = ireq->ir_v6_loc_addr;
newsk->sk_bound_dev_if = ireq->ir_iif;
/* Now IPv6 options...
First: no IPv4 options.
*/
newinet->inet_opt = NULL;
newnp->ipv6_mc_list = NULL;
newnp->ipv6_ac_list = NULL;
newnp->ipv6_fl_list = NULL;
/* Clone RX bits */
newnp->rxopt.all = np->rxopt.all;
newnp->pktoptions = NULL;
newnp->opt = NULL;
newnp->mcast_oif = tcp_v6_iif(skb);
newnp->mcast_hops = ipv6_hdr(skb)->hop_limit;
newnp->rcv_flowinfo = ip6_flowinfo(ipv6_hdr(skb));
if (inet6_test_bit(REPFLOW, sk))
newnp->flow_label = ip6_flowlabel(ipv6_hdr(skb));
/* Set ToS of the new socket based upon the value of incoming SYN.
* ECT bits are set later in tcp_init_transfer().
*/
if (READ_ONCE(sock_net(sk)->ipv4.sysctl_tcp_reflect_tos))
newnp->tclass = tcp_rsk(req)->syn_tos & ~INET_ECN_MASK;
/* Clone native IPv6 options from listening socket (if any)
Yes, keeping reference count would be much more clever,
but we make one more one thing there: reattach optmem
to newsk.
*/
opt = ireq->ipv6_opt;
if (!opt)
opt = rcu_dereference(np->opt);
if (opt) {
opt = ipv6_dup_options(newsk, opt);
RCU_INIT_POINTER(newnp->opt, opt);
}
inet_csk(newsk)->icsk_ext_hdr_len = 0;
if (opt)
inet_csk(newsk)->icsk_ext_hdr_len = opt->opt_nflen +
opt->opt_flen;
net: tcp: add per route congestion control This work adds the possibility to define a per route/destination congestion control algorithm. Generally, this opens up the possibility for a machine with different links to enforce specific congestion control algorithms with optimal strategies for each of them based on their network characteristics, even transparently for a single application listening on all links. For our specific use case, this additionally facilitates deployment of DCTCP, for example, applications can easily serve internal traffic/dsts in DCTCP and external one with CUBIC. Other scenarios would also allow for utilizing e.g. long living, low priority background flows for certain destinations/routes while still being able for normal traffic to utilize the default congestion control algorithm. We also thought about a per netns setting (where different defaults are possible), but given its actually a link specific property, we argue that a per route/destination setting is the most natural and flexible. The administrator can utilize this through ip-route(8) by appending "congctl [lock] <name>", where <name> denotes the name of a congestion control algorithm and the optional lock parameter allows to enforce the given algorithm so that applications in user space would not be allowed to overwrite that algorithm for that destination. The dst metric lookups are being done when a dst entry is already available in order to avoid a costly lookup and still before the algorithms are being initialized, thus overhead is very low when the feature is not being used. While the client side would need to drop the current reference on the module, on server side this can actually even be avoided as we just got a flat-copied socket clone. Joint work with Florian Westphal. Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06 06:57:48 +08:00
tcp_ca_openreq_child(newsk, dst);
tcp_sync_mss(newsk, dst_mtu(dst));
newtp->advmss = tcp_mss_clamp(tcp_sk(sk), dst_metric_advmss(dst));
tcp_initialize_rcv_mss(newsk);
newinet->inet_daddr = newinet->inet_saddr = LOOPBACK4_IPV6;
newinet->inet_rcv_saddr = LOOPBACK4_IPV6;
#ifdef CONFIG_TCP_MD5SIG
l3index = l3mdev_master_ifindex_by_index(sock_net(sk), ireq->ir_iif);
if (!tcp_rsk_used_ao(req)) {
/* Copy over the MD5 key from the original socket */
key = tcp_v6_md5_do_lookup(sk, &newsk->sk_v6_daddr, l3index);
if (key) {
const union tcp_md5_addr *addr;
addr = (union tcp_md5_addr *)&newsk->sk_v6_daddr;
if (tcp_md5_key_copy(newsk, addr, AF_INET6, 128, l3index, key)) {
inet_csk_prepare_forced_close(newsk);
tcp_done(newsk);
goto out;
}
}
}
#endif
#ifdef CONFIG_TCP_AO
/* Copy over tcp_ao_info if any */
if (tcp_ao_copy_all_matching(sk, newsk, req, skb, AF_INET6))
goto out; /* OOM */
#endif
if (__inet_inherit_port(sk, newsk) < 0) {
inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sock If in either of the above functions inet_csk_route_child_sock() or __inet_inherit_port() fails, the newsk will not be freed: unreferenced object 0xffff88022e8a92c0 (size 1592): comm "softirq", pid 0, jiffies 4294946244 (age 726.160s) hex dump (first 32 bytes): 0a 01 01 01 0a 01 01 02 00 00 00 00 a7 cc 16 00 ................ 02 00 03 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8153d190>] kmemleak_alloc+0x21/0x3e [<ffffffff810ab3e7>] kmem_cache_alloc+0xb5/0xc5 [<ffffffff8149b65b>] sk_prot_alloc.isra.53+0x2b/0xcd [<ffffffff8149b784>] sk_clone_lock+0x16/0x21e [<ffffffff814d711a>] inet_csk_clone_lock+0x10/0x7b [<ffffffff814ebbc3>] tcp_create_openreq_child+0x21/0x481 [<ffffffff814e8fa5>] tcp_v4_syn_recv_sock+0x3a/0x23b [<ffffffff814ec5ba>] tcp_check_req+0x29f/0x416 [<ffffffff814e8e10>] tcp_v4_do_rcv+0x161/0x2bc [<ffffffff814eb917>] tcp_v4_rcv+0x6c9/0x701 [<ffffffff814cea9f>] ip_local_deliver_finish+0x70/0xc4 [<ffffffff814cec20>] ip_local_deliver+0x4e/0x7f [<ffffffff814ce9f8>] ip_rcv_finish+0x1fc/0x233 [<ffffffff814cee68>] ip_rcv+0x217/0x267 [<ffffffff814a7bbe>] __netif_receive_skb+0x49e/0x553 [<ffffffff814a7cc3>] netif_receive_skb+0x50/0x82 This happens, because sk_clone_lock initializes sk_refcnt to 2, and thus a single sock_put() is not enough to free the memory. Additionally, things like xfrm, memcg, cookie_values,... may have been initialized. We have to free them properly. This is fixed by forcing a call to tcp_done(), ending up in inet_csk_destroy_sock, doing the final sock_put(). tcp_done() is necessary, because it ends up doing all the cleanup on xfrm, memcg, cookie_values, xfrm,... Before calling tcp_done, we have to set the socket to SOCK_DEAD, to force it entering inet_csk_destroy_sock. To avoid the warning in inet_csk_destroy_sock, inet_num has to be set to 0. As inet_csk_destroy_sock does a dec on orphan_count, we first have to increase it. Calling tcp_done() allows us to remove the calls to tcp_clear_xmit_timer() and tcp_cleanup_congestion_control(). A similar approach is taken for dccp by calling dccp_done(). This is in the kernel since 093d282321 (tproxy: fix hash locking issue when using port redirection in __inet_inherit_port()), thus since version >= 2.6.37. Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-14 12:07:58 +08:00
inet_csk_prepare_forced_close(newsk);
tcp_done(newsk);
goto out;
}
tcp: fix race condition when creating child sockets from syncookies When the TCP stack is in SYN flood mode, the server child socket is created from the SYN cookie received in a TCP packet with the ACK flag set. The child socket is created when the server receives the first TCP packet with a valid SYN cookie from the client. Usually, this packet corresponds to the final step of the TCP 3-way handshake, the ACK packet. But is also possible to receive a valid SYN cookie from the first TCP data packet sent by the client, and thus create a child socket from that SYN cookie. Since a client socket is ready to send data as soon as it receives the SYN+ACK packet from the server, the client can send the ACK packet (sent by the TCP stack code), and the first data packet (sent by the userspace program) almost at the same time, and thus the server will equally receive the two TCP packets with valid SYN cookies almost at the same instant. When such event happens, the TCP stack code has a race condition that occurs between the momement a lookup is done to the established connections hashtable to check for the existence of a connection for the same client, and the moment that the child socket is added to the established connections hashtable. As a consequence, this race condition can lead to a situation where we add two child sockets to the established connections hashtable and deliver two sockets to the userspace program to the same client. This patch fixes the race condition by checking if an existing child socket exists for the same client when we are adding the second child socket to the established connections socket. If an existing child socket exists, we drop the packet and discard the second child socket to the same client. Signed-off-by: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20 19:11:33 +08:00
*own_req = inet_ehash_nolisten(newsk, req_to_sk(req_unhash),
&found_dup_sk);
if (*own_req) {
tcp_move_syn(newtp, req);
/* Clone pktoptions received with SYN, if we own the req */
if (ireq->pktopts) {
newnp->pktoptions = skb_clone_and_charge_r(ireq->pktopts, newsk);
consume_skb(ireq->pktopts);
ireq->pktopts = NULL;
if (newnp->pktoptions)
tcp_v6_restore_cb(newnp->pktoptions);
}
tcp: fix race condition when creating child sockets from syncookies When the TCP stack is in SYN flood mode, the server child socket is created from the SYN cookie received in a TCP packet with the ACK flag set. The child socket is created when the server receives the first TCP packet with a valid SYN cookie from the client. Usually, this packet corresponds to the final step of the TCP 3-way handshake, the ACK packet. But is also possible to receive a valid SYN cookie from the first TCP data packet sent by the client, and thus create a child socket from that SYN cookie. Since a client socket is ready to send data as soon as it receives the SYN+ACK packet from the server, the client can send the ACK packet (sent by the TCP stack code), and the first data packet (sent by the userspace program) almost at the same time, and thus the server will equally receive the two TCP packets with valid SYN cookies almost at the same instant. When such event happens, the TCP stack code has a race condition that occurs between the momement a lookup is done to the established connections hashtable to check for the existence of a connection for the same client, and the moment that the child socket is added to the established connections hashtable. As a consequence, this race condition can lead to a situation where we add two child sockets to the established connections hashtable and deliver two sockets to the userspace program to the same client. This patch fixes the race condition by checking if an existing child socket exists for the same client when we are adding the second child socket to the established connections socket. If an existing child socket exists, we drop the packet and discard the second child socket to the same client. Signed-off-by: Ricardo Dias <rdias@singlestore.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20 19:11:33 +08:00
} else {
if (!req_unhash && found_dup_sk) {
/* This code path should only be executed in the
* syncookie case only
*/
bh_unlock_sock(newsk);
sock_put(newsk);
newsk = NULL;
}
}
return newsk;
out_overflow:
__NET_INC_STATS(sock_net(sk), LINUX_MIB_LISTENOVERFLOWS);
out_nonewsk:
dst_release(dst);
out:
tcp_listendrop(sk);
return NULL;
}
INDIRECT_CALLABLE_DECLARE(struct dst_entry *ipv4_dst_check(struct dst_entry *,
u32));
/* The socket must have it's spinlock held when we get
* here, unless it is a TCP_LISTEN socket.
*
* We have a potential double-lock case here, so even when
* doing backlog processing we use the BH locking scheme.
* This is because we cannot sleep with the original spinlock
* held.
*/
INDIRECT_CALLABLE_SCOPE
int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb)
{
struct ipv6_pinfo *np = tcp_inet6_sk(sk);
struct sk_buff *opt_skb = NULL;
enum skb_drop_reason reason;
struct tcp_sock *tp;
/* Imagine: socket is IPv6. IPv4 packet arrives,
goes to IPv4 receive handler and backlogged.
From backlog it always goes here. Kerboom...
Fortunately, tcp_rcv_established and rcv_established
handle them correctly, but it is not case with
tcp_v6_hnd_req and tcp_v6_send_reset(). --ANK
*/
if (skb->protocol == htons(ETH_P_IP))
return tcp_v4_do_rcv(sk, skb);
/*
* socket locking is here for SMP purposes as backlog rcv
* is currently called with bh processing disabled.
*/
/* Do Stevens' IPV6_PKTOPTIONS.
Yes, guys, it is the only place in our code, where we
may make it not affecting IPv4.
The rest of code is protocol independent,
and I do not like idea to uglify IPv4.
Actually, all the idea behind IPV6_PKTOPTIONS
looks not very well thought. For now we latch
options, received in the last packet, enqueued
by tcp. Feel free to propose better solution.
--ANK (980728)
*/
if (np->rxopt.all)
opt_skb = skb_clone_and_charge_r(skb, sk);
if (sk->sk_state == TCP_ESTABLISHED) { /* Fast path */
inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340 ip_route_input_rcu net/ipv4/route.c:2470 [inline] ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Freed by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749 slab_free mm/slub.c:3513 [inline] kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2506 [inline] rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:2985 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065 dst_release net/core/dst.c:177 [inline] dst_release+0x79/0xe0 net/core/dst.c:167 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2768 release_sock+0x54/0x1b0 net/core/sock.c:3300 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x289/0x3c0 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write+0x429/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807f1cb700 which belongs to the cache ip_dst_cache of size 176 The buggy address is located 58 bytes inside of 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0) The buggy address belongs to the page: page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 alloc_slab_page mm/slub.c:1793 [inline] allocate_slab mm/slub.c:1930 [inline] new_slab+0x32d/0x4a0 mm/slub.c:1993 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 slab_alloc_node mm/slub.c:3200 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 __mkroute_output net/ipv4/route.c:2564 [inline] ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850 ip_route_output_key include/net/route.h:142 [inline] geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809 geneve_xmit_skb drivers/net/geneve.c:899 [inline] geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082 __netdev_start_xmit include/linux/netdevice.h:4994 [inline] netdev_start_xmit include/linux/netdevice.h:5008 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline] mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211220143330.680945-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20 22:33:30 +08:00
struct dst_entry *dst;
dst = rcu_dereference_protected(sk->sk_rx_dst,
lockdep_sock_is_held(sk));
sock_rps_save_rxhash(sk, skb);
sk_mark_napi_id(sk, skb);
if (dst) {
if (sk->sk_rx_dst_ifindex != skb->skb_iif ||
INDIRECT_CALL_1(dst->ops->check, ip6_dst_check,
dst, sk->sk_rx_dst_cookie) == NULL) {
inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340 ip_route_input_rcu net/ipv4/route.c:2470 [inline] ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Freed by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749 slab_free mm/slub.c:3513 [inline] kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2506 [inline] rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:2985 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065 dst_release net/core/dst.c:177 [inline] dst_release+0x79/0xe0 net/core/dst.c:167 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2768 release_sock+0x54/0x1b0 net/core/sock.c:3300 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x289/0x3c0 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write+0x429/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807f1cb700 which belongs to the cache ip_dst_cache of size 176 The buggy address is located 58 bytes inside of 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0) The buggy address belongs to the page: page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 alloc_slab_page mm/slub.c:1793 [inline] allocate_slab mm/slub.c:1930 [inline] new_slab+0x32d/0x4a0 mm/slub.c:1993 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 slab_alloc_node mm/slub.c:3200 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 __mkroute_output net/ipv4/route.c:2564 [inline] ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850 ip_route_output_key include/net/route.h:142 [inline] geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809 geneve_xmit_skb drivers/net/geneve.c:899 [inline] geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082 __netdev_start_xmit include/linux/netdevice.h:4994 [inline] netdev_start_xmit include/linux/netdevice.h:5008 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline] mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211220143330.680945-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20 22:33:30 +08:00
RCU_INIT_POINTER(sk->sk_rx_dst, NULL);
dst_release(dst);
}
}
tcp_rcv_established(sk, skb);
if (opt_skb)
goto ipv6_pktoptions;
return 0;
}
if (tcp_checksum_complete(skb))
goto csum_err;
if (sk->sk_state == TCP_LISTEN) {
struct sock *nsk = tcp_v6_cookie_check(sk, skb);
if (nsk != sk) {
if (nsk) {
reason = tcp_child_process(sk, nsk, skb);
if (reason)
goto reset;
}
if (opt_skb)
__kfree_skb(opt_skb);
return 0;
}
} else
sock_rps_save_rxhash(sk, skb);
reason = tcp_rcv_state_process(sk, skb);
if (reason)
goto reset;
if (opt_skb)
goto ipv6_pktoptions;
return 0;
reset:
tcp_v6_send_reset(sk, skb, sk_rst_convert_drop_reason(reason));
discard:
if (opt_skb)
__kfree_skb(opt_skb);
kfree_skb_reason(skb, reason);
return 0;
csum_err:
reason = SKB_DROP_REASON_TCP_CSUM;
trace_tcp_bad_csum(skb);
TCP_INC_STATS(sock_net(sk), TCP_MIB_CSUMERRORS);
TCP_INC_STATS(sock_net(sk), TCP_MIB_INERRS);
goto discard;
ipv6_pktoptions:
/* Do you ask, what is it?
1. skb was enqueued by tcp.
2. skb is added to tail of read queue, rather than out of order.
3. socket is not in passive state.
4. Finally, it really contains options, which user wants to receive.
*/
tp = tcp_sk(sk);
if (TCP_SKB_CB(opt_skb)->end_seq == tp->rcv_nxt &&
!((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN))) {
if (np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo)
WRITE_ONCE(np->mcast_oif, tcp_v6_iif(opt_skb));
if (np->rxopt.bits.rxhlim || np->rxopt.bits.rxohlim)
WRITE_ONCE(np->mcast_hops,
ipv6_hdr(opt_skb)->hop_limit);
if (np->rxopt.bits.rxflow || np->rxopt.bits.rxtclass)
np->rcv_flowinfo = ip6_flowinfo(ipv6_hdr(opt_skb));
if (inet6_test_bit(REPFLOW, sk))
np->flow_label = ip6_flowlabel(ipv6_hdr(opt_skb));
if (ipv6_opt_accepted(sk, opt_skb, &TCP_SKB_CB(opt_skb)->header.h6)) {
ipv6: tcp: restore IP6CB for pktoptions skbs Baozeng Ding reported following KASAN splat : BUG: KASAN: use-after-free in ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 at addr ffff880029c84ec8 Read of size 1 by task poc/25548 Call Trace: [<ffffffff82cf43c9>] dump_stack+0x12e/0x185 /lib/dump_stack.c:15 [< inline >] print_address_description /mm/kasan/report.c:204 [<ffffffff817ced3b>] kasan_report_error+0x48b/0x4b0 /mm/kasan/report.c:283 [< inline >] kasan_report /mm/kasan/report.c:303 [<ffffffff817ced9e>] __asan_report_load1_noabort+0x3e/0x40 /mm/kasan/report.c:321 [<ffffffff85c71da1>] ip6_datagram_recv_specific_ctl+0x13f1/0x15c0 /net/ipv6/datagram.c:687 [<ffffffff85c734c3>] ip6_datagram_recv_ctl+0x33/0x40 [<ffffffff85c0b07c>] do_ipv6_getsockopt.isra.4+0xaec/0x2150 [<ffffffff85c0c7f6>] ipv6_getsockopt+0x116/0x230 [<ffffffff859b5a12>] tcp_getsockopt+0x82/0xd0 /net/ipv4/tcp.c:3035 [<ffffffff855fb385>] sock_common_getsockopt+0x95/0xd0 /net/core/sock.c:2647 [< inline >] SYSC_getsockopt /net/socket.c:1776 [<ffffffff855f8ba2>] SyS_getsockopt+0x142/0x230 /net/socket.c:1758 [<ffffffff8685cdc5>] entry_SYSCALL_64_fastpath+0x23/0xc6 Memory state around the buggy address: ffff880029c84d80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84e00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > ffff880029c84e80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff880029c84f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff880029c84f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff He also provided a syzkaller reproducer. Issue is that ip6_datagram_recv_specific_ctl() expects to find IP6CB data that was moved at a different place in tcp_v6_rcv() This patch moves tcp_v6_restore_cb() up and calls it from tcp_v6_do_rcv() when np->pktoptions is set. Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Baozeng Ding <sploving1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13 01:01:45 +08:00
tcp_v6_restore_cb(opt_skb);
opt_skb = xchg(&np->pktoptions, opt_skb);
} else {
__kfree_skb(opt_skb);
opt_skb = xchg(&np->pktoptions, NULL);
}
}
consume_skb(opt_skb);
return 0;
}
static void tcp_v6_fill_cb(struct sk_buff *skb, const struct ipv6hdr *hdr,
const struct tcphdr *th)
{
/* This is tricky: we move IP6CB at its correct location into
* TCP_SKB_CB(). It must be done after xfrm6_policy_check(), because
* _decode_session6() uses IP6CB().
* barrier() makes sure compiler won't play aliasing games.
*/
memmove(&TCP_SKB_CB(skb)->header.h6, IP6CB(skb),
sizeof(struct inet6_skb_parm));
barrier();
TCP_SKB_CB(skb)->seq = ntohl(th->seq);
TCP_SKB_CB(skb)->end_seq = (TCP_SKB_CB(skb)->seq + th->syn + th->fin +
skb->len - th->doff*4);
TCP_SKB_CB(skb)->ack_seq = ntohl(th->ack_seq);
TCP_SKB_CB(skb)->tcp_flags = tcp_flag_byte(th);
TCP_SKB_CB(skb)->ip_dsfield = ipv6_get_dsfield(hdr);
TCP_SKB_CB(skb)->sacked = 0;
TCP_SKB_CB(skb)->has_rxtstamp =
skb->tstamp || skb_hwtstamps(skb)->hwtstamp;
}
INDIRECT_CALLABLE_SCOPE int tcp_v6_rcv(struct sk_buff *skb)
{
enum skb_drop_reason drop_reason;
int sdif = inet6_sdif(skb);
int dif = inet6_iif(skb);
const struct tcphdr *th;
const struct ipv6hdr *hdr;
bool refcounted;
struct sock *sk;
int ret;
2024-04-07 17:33:22 +08:00
u32 isn;
struct net *net = dev_net(skb->dev);
drop_reason = SKB_DROP_REASON_NOT_SPECIFIED;
if (skb->pkt_type != PACKET_HOST)
goto discard_it;
/*
* Count it even if it's bad.
*/
__TCP_INC_STATS(net, TCP_MIB_INSEGS);
if (!pskb_may_pull(skb, sizeof(struct tcphdr)))
goto discard_it;
th = (const struct tcphdr *)skb->data;
if (unlikely(th->doff < sizeof(struct tcphdr) / 4)) {
drop_reason = SKB_DROP_REASON_PKT_TOO_SMALL;
goto bad_packet;
}
if (!pskb_may_pull(skb, th->doff*4))
goto discard_it;
if (skb_checksum_init(skb, IPPROTO_TCP, ip6_compute_pseudo))
goto csum_error;
th = (const struct tcphdr *)skb->data;
hdr = ipv6_hdr(skb);
lookup:
sk = __inet6_lookup_skb(net->ipv4.tcp_death_row.hashinfo, skb, __tcp_hdrlen(th),
th->source, th->dest, inet6_iif(skb), sdif,
&refcounted);
if (!sk)
goto no_tcp_socket;
if (sk->sk_state == TCP_TIME_WAIT)
goto do_time_wait;
if (sk->sk_state == TCP_NEW_SYN_RECV) {
struct request_sock *req = inet_reqsk(sk);
bool req_stolen = false;
struct sock *nsk;
sk = req->rsk_listener;
2023-09-23 05:04:58 +08:00
if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb))
drop_reason = SKB_DROP_REASON_XFRM_POLICY;
else
drop_reason = tcp_inbound_hash(sk, req, skb,
&hdr->saddr, &hdr->daddr,
AF_INET6, dif, sdif);
if (drop_reason) {
sk_drops_add(sk, skb);
reqsk_put(req);
goto discard_it;
}
if (tcp_checksum_complete(skb)) {
reqsk_put(req);
goto csum_error;
}
if (unlikely(sk->sk_state != TCP_LISTEN)) {
tcp: Migrate TCP_NEW_SYN_RECV requests at receiving the final ACK. This patch also changes the code to call reuseport_migrate_sock() and inet_reqsk_clone(), but unlike the other cases, we do not call inet_reqsk_clone() right after reuseport_migrate_sock(). Currently, in the receive path for TCP_NEW_SYN_RECV sockets, its listener has three kinds of refcnt: (A) for listener itself (B) carried by reuqest_sock (C) sock_hold() in tcp_v[46]_rcv() While processing the req, (A) may disappear by close(listener). Also, (B) can disappear by accept(listener) once we put the req into the accept queue. So, we have to hold another refcnt (C) for the listener to prevent use-after-free. For socket migration, we call reuseport_migrate_sock() to select a listener with (A) and to increment the new listener's refcnt in tcp_v[46]_rcv(). This refcnt corresponds to (C) and is cleaned up later in tcp_v[46]_rcv(). Thus we have to take another refcnt (B) for the newly cloned request_sock. In inet_csk_complete_hashdance(), we hold the count (B), clone the req, and try to put the new req into the accept queue. By migrating req after winning the "own_req" race, we can avoid such a worst situation: CPU 1 looks up req1 CPU 2 looks up req1, unhashes it, then CPU 1 loses the race CPU 3 looks up req2, unhashes it, then CPU 2 loses the race ... Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210612123224.12525-8-kuniyu@amazon.co.jp
2021-06-12 20:32:20 +08:00
nsk = reuseport_migrate_sock(sk, req_to_sk(req), skb);
if (!nsk) {
inet_csk_reqsk_queue_drop_and_put(sk, req);
goto lookup;
}
sk = nsk;
/* reuseport_migrate_sock() has already held one sk_refcnt
* before returning.
*/
} else {
sock_hold(sk);
}
refcounted = true;
nsk = NULL;
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf7f9d ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04 01:32:59 +08:00
if (!tcp_filter(sk, skb)) {
th = (const struct tcphdr *)skb->data;
hdr = ipv6_hdr(skb);
tcp_v6_fill_cb(skb, hdr, th);
nsk = tcp_check_req(sk, skb, req, false, &req_stolen);
} else {
drop_reason = SKB_DROP_REASON_SOCKET_FILTER;
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf7f9d ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04 01:32:59 +08:00
}
if (!nsk) {
reqsk_put(req);
if (req_stolen) {
/* Another cpu got exclusive access to req
* and created a full blown socket.
* Try to feed this packet to this socket
* instead of discarding it.
*/
tcp_v6_restore_cb(skb);
sock_put(sk);
goto lookup;
}
goto discard_and_relse;
}
2023-09-23 05:04:58 +08:00
nf_reset_ct(skb);
if (nsk == sk) {
reqsk_put(req);
tcp_v6_restore_cb(skb);
} else {
drop_reason = tcp_child_process(sk, nsk, skb);
if (drop_reason) {
enum sk_rst_reason rst_reason;
rst_reason = sk_rst_convert_drop_reason(drop_reason);
tcp_v6_send_reset(nsk, skb, rst_reason);
goto discard_and_relse;
}
sock_put(sk);
return 0;
}
}
process:
if (static_branch_unlikely(&ip6_min_hopcount)) {
/* min_hopcount can be changed concurrently from do_ipv6_setsockopt() */
if (unlikely(hdr->hop_limit < READ_ONCE(tcp_inet6_sk(sk)->min_hopcount))) {
__NET_INC_STATS(net, LINUX_MIB_TCPMINTTLDROP);
drop_reason = SKB_DROP_REASON_TCP_MINTTL;
goto discard_and_relse;
}
}
if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb)) {
drop_reason = SKB_DROP_REASON_XFRM_POLICY;
goto discard_and_relse;
}
drop_reason = tcp_inbound_hash(sk, NULL, skb, &hdr->saddr, &hdr->daddr,
AF_INET6, dif, sdif);
if (drop_reason)
goto discard_and_relse;
nf_reset_ct(skb);
if (tcp_filter(sk, skb)) {
drop_reason = SKB_DROP_REASON_SOCKET_FILTER;
goto discard_and_relse;
}
th = (const struct tcphdr *)skb->data;
hdr = ipv6_hdr(skb);
tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() James Morris reported kernel stack corruption bug [1] while running the SELinux testsuite, and bisected to a recent commit bffa72cf7f9d ("net: sk_buff rbnode reorg") We believe this commit is fine, but exposes an older bug. SELinux code runs from tcp_filter() and might send an ICMP, expecting IP options to be found in skb->cb[] using regular IPCB placement. We need to defer TCP mangling of skb->cb[] after tcp_filter() calls. This patch adds tcp_v4_fill_cb()/tcp_v4_restore_cb() in a very similar way we added them for IPv6. [1] [ 339.806024] SELinux: failure in selinux_parse_skb(), unable to parse packet [ 339.822505] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81745af5 [ 339.822505] [ 339.852250] CPU: 4 PID: 3642 Comm: client Not tainted 4.15.0-rc1-test #15 [ 339.868498] Hardware name: LENOVO 10FGS0VA1L/30BC, BIOS FWKT68A 01/19/2017 [ 339.885060] Call Trace: [ 339.896875] <IRQ> [ 339.908103] dump_stack+0x63/0x87 [ 339.920645] panic+0xe8/0x248 [ 339.932668] ? ip_push_pending_frames+0x33/0x40 [ 339.946328] ? icmp_send+0x525/0x530 [ 339.958861] ? kfree_skbmem+0x60/0x70 [ 339.971431] __stack_chk_fail+0x1b/0x20 [ 339.984049] icmp_send+0x525/0x530 [ 339.996205] ? netlbl_skbuff_err+0x36/0x40 [ 340.008997] ? selinux_netlbl_err+0x11/0x20 [ 340.021816] ? selinux_socket_sock_rcv_skb+0x211/0x230 [ 340.035529] ? security_sock_rcv_skb+0x3b/0x50 [ 340.048471] ? sk_filter_trim_cap+0x44/0x1c0 [ 340.061246] ? tcp_v4_inbound_md5_hash+0x69/0x1b0 [ 340.074562] ? tcp_filter+0x2c/0x40 [ 340.086400] ? tcp_v4_rcv+0x820/0xa20 [ 340.098329] ? ip_local_deliver_finish+0x71/0x1a0 [ 340.111279] ? ip_local_deliver+0x6f/0xe0 [ 340.123535] ? ip_rcv_finish+0x3a0/0x3a0 [ 340.135523] ? ip_rcv_finish+0xdb/0x3a0 [ 340.147442] ? ip_rcv+0x27c/0x3c0 [ 340.158668] ? inet_del_offload+0x40/0x40 [ 340.170580] ? __netif_receive_skb_core+0x4ac/0x900 [ 340.183285] ? rcu_accelerate_cbs+0x5b/0x80 [ 340.195282] ? __netif_receive_skb+0x18/0x60 [ 340.207288] ? process_backlog+0x95/0x140 [ 340.218948] ? net_rx_action+0x26c/0x3b0 [ 340.230416] ? __do_softirq+0xc9/0x26a [ 340.241625] ? do_softirq_own_stack+0x2a/0x40 [ 340.253368] </IRQ> [ 340.262673] ? do_softirq+0x50/0x60 [ 340.273450] ? __local_bh_enable_ip+0x57/0x60 [ 340.285045] ? ip_finish_output2+0x175/0x350 [ 340.296403] ? ip_finish_output+0x127/0x1d0 [ 340.307665] ? nf_hook_slow+0x3c/0xb0 [ 340.318230] ? ip_output+0x72/0xe0 [ 340.328524] ? ip_fragment.constprop.54+0x80/0x80 [ 340.340070] ? ip_local_out+0x35/0x40 [ 340.350497] ? ip_queue_xmit+0x15c/0x3f0 [ 340.361060] ? __kmalloc_reserve.isra.40+0x31/0x90 [ 340.372484] ? __skb_clone+0x2e/0x130 [ 340.382633] ? tcp_transmit_skb+0x558/0xa10 [ 340.393262] ? tcp_connect+0x938/0xad0 [ 340.403370] ? ktime_get_with_offset+0x4c/0xb0 [ 340.414206] ? tcp_v4_connect+0x457/0x4e0 [ 340.424471] ? __inet_stream_connect+0xb3/0x300 [ 340.435195] ? inet_stream_connect+0x3b/0x60 [ 340.445607] ? SYSC_connect+0xd9/0x110 [ 340.455455] ? __audit_syscall_entry+0xaf/0x100 [ 340.466112] ? syscall_trace_enter+0x1d0/0x2b0 [ 340.476636] ? __audit_syscall_exit+0x209/0x290 [ 340.487151] ? SyS_connect+0xe/0x10 [ 340.496453] ? do_syscall_64+0x67/0x1b0 [ 340.506078] ? entry_SYSCALL64_slow_path+0x25/0x25 Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: James Morris <james.l.morris@oracle.com> Tested-by: James Morris <james.l.morris@oracle.com> Tested-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-04 01:32:59 +08:00
tcp_v6_fill_cb(skb, hdr, th);
skb->dev = NULL;
if (sk->sk_state == TCP_LISTEN) {
ret = tcp_v6_do_rcv(sk, skb);
goto put_and_return;
}
sk_incoming_cpu_update(sk);
bh_lock_sock_nested(sk);
tcp: Add RFC4898 tcpEStatsPerfDataSegsOut/In Per RFC4898, they count segments sent/received containing a positive length data segment (that includes retransmission segments carrying data). Unlike tcpi_segs_out/in, tcpi_data_segs_out/in excludes segments carrying no data (e.g. pure ack). The patch also updates the segs_in in tcp_fastopen_add_skb() so that segs_in >= data_segs_in property is kept. Together with retransmission data, tcpi_data_segs_out gives a better signal on the rxmit rate. v6: Rebase on the latest net-next v5: Eric pointed out that checking skb->len is still needed in tcp_fastopen_add_skb() because skb can carry a FIN without data. Hence, instead of open coding segs_in and data_segs_in, tcp_segs_in() helper is used. Comment is added to the fastopen case to explain why segs_in has to be reset and tcp_segs_in() has to be called before __skb_pull(). v4: Add comment to the changes in tcp_fastopen_add_skb() and also add remark on this case in the commit message. v3: Add const modifier to the skb parameter in tcp_segs_in() v2: Rework based on recent fix by Eric: commit a9d99ce28ed3 ("tcp: fix tcpi_segs_in after connection establishment") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Chris Rapier <rapier@psc.edu> Cc: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <mleitner@redhat.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-15 01:52:15 +08:00
tcp_segs_in(tcp_sk(sk), skb);
ret = 0;
if (!sock_owned_by_user(sk)) {
ret = tcp_v6_do_rcv(sk, skb);
tcp: add one skb cache for rx Often times, recvmsg() system calls and BH handling for a particular TCP socket are done on different cpus. This means the incoming skb had to be allocated on a cpu, but freed on another. This incurs a high spinlock contention in slab layer for small rpc, but also a high number of cache line ping pongs for larger packets. A full size GRO packet might use 45 page fragments, meaning that up to 45 put_page() can be involved. More over performing the __kfree_skb() in the recvmsg() context adds a latency for user applications, and increase probability of trapping them in backlog processing, since the BH handler might found the socket owned by the user. This patch, combined with the prior one increases the rpc performance by about 10 % on servers with large number of cores. (tcp_rr workload with 10,000 flows and 112 threads reach 9 Mpps instead of 8 Mpps) This also increases single bulk flow performance on 40Gbit+ links, since in this case there are often two cpus working in tandem : - CPU handling the NIC rx interrupts, feeding the receive queue, and (after this patch) freeing the skbs that were consumed. - CPU in recvmsg() system call, essentially 100 % busy copying out data to user space. Having at most one skb in a per-socket cache has very little risk of memory exhaustion, and since it is protected by socket lock, its management is essentially free. Note that if rps/rfs is used, we do not enable this feature, because there is high chance that the same cpu is handling both the recvmsg() system call and the TCP rx path, but that another cpu did the skb allocations in the device driver right before the RPS/RFS logic. To properly handle this case, it seems we would need to record on which cpu skb was allocated, and use a different channel to give skbs back to this cpu. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22 23:56:40 +08:00
} else {
if (tcp_add_backlog(sk, skb, &drop_reason))
tcp: add one skb cache for rx Often times, recvmsg() system calls and BH handling for a particular TCP socket are done on different cpus. This means the incoming skb had to be allocated on a cpu, but freed on another. This incurs a high spinlock contention in slab layer for small rpc, but also a high number of cache line ping pongs for larger packets. A full size GRO packet might use 45 page fragments, meaning that up to 45 put_page() can be involved. More over performing the __kfree_skb() in the recvmsg() context adds a latency for user applications, and increase probability of trapping them in backlog processing, since the BH handler might found the socket owned by the user. This patch, combined with the prior one increases the rpc performance by about 10 % on servers with large number of cores. (tcp_rr workload with 10,000 flows and 112 threads reach 9 Mpps instead of 8 Mpps) This also increases single bulk flow performance on 40Gbit+ links, since in this case there are often two cpus working in tandem : - CPU handling the NIC rx interrupts, feeding the receive queue, and (after this patch) freeing the skbs that were consumed. - CPU in recvmsg() system call, essentially 100 % busy copying out data to user space. Having at most one skb in a per-socket cache has very little risk of memory exhaustion, and since it is protected by socket lock, its management is essentially free. Note that if rps/rfs is used, we do not enable this feature, because there is high chance that the same cpu is handling both the recvmsg() system call and the TCP rx path, but that another cpu did the skb allocations in the device driver right before the RPS/RFS logic. To properly handle this case, it seems we would need to record on which cpu skb was allocated, and use a different channel to give skbs back to this cpu. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22 23:56:40 +08:00
goto discard_and_relse;
}
bh_unlock_sock(sk);
put_and_return:
if (refcounted)
sock_put(sk);
return ret ? -1 : 0;
no_tcp_socket:
drop_reason = SKB_DROP_REASON_NO_SOCKET;
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb))
goto discard_it;
tcp_v6_fill_cb(skb, hdr, th);
if (tcp_checksum_complete(skb)) {
csum_error:
drop_reason = SKB_DROP_REASON_TCP_CSUM;
trace_tcp_bad_csum(skb);
__TCP_INC_STATS(net, TCP_MIB_CSUMERRORS);
bad_packet:
__TCP_INC_STATS(net, TCP_MIB_INERRS);
} else {
tcp_v6_send_reset(NULL, skb, sk_rst_convert_drop_reason(drop_reason));
}
discard_it:
SKB_DR_OR(drop_reason, NOT_SPECIFIED);
kfree_skb_reason(skb, drop_reason);
return 0;
discard_and_relse:
sk_drops_add(sk, skb);
if (refcounted)
sock_put(sk);
goto discard_it;
do_time_wait:
if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
drop_reason = SKB_DROP_REASON_XFRM_POLICY;
inet_twsk_put(inet_twsk(sk));
goto discard_it;
}
tcp_v6_fill_cb(skb, hdr, th);
if (tcp_checksum_complete(skb)) {
inet_twsk_put(inet_twsk(sk));
goto csum_error;
}
2024-04-07 17:33:22 +08:00
switch (tcp_timewait_state_process(inet_twsk(sk), skb, th, &isn)) {
case TCP_TW_SYN:
{
struct sock *sk2;
sk2 = inet6_lookup_listener(net, net->ipv4.tcp_death_row.hashinfo,
skb, __tcp_hdrlen(th),
&ipv6_hdr(skb)->saddr, th->source,
&ipv6_hdr(skb)->daddr,
ntohs(th->dest),
tcp_v6_iif_l3_slave(skb),
sdif);
if (sk2) {
struct inet_timewait_sock *tw = inet_twsk(sk);
inet_twsk_deschedule_put(tw);
sk = sk2;
tcp_v6_restore_cb(skb);
refcounted = false;
2024-04-07 17:33:22 +08:00
__this_cpu_write(tcp_tw_isn, isn);
goto process;
}
}
/* to ACK */
fallthrough;
case TCP_TW_ACK:
tcp_v6_timewait_ack(sk, skb);
break;
case TCP_TW_RST:
tcp_v6_send_reset(sk, skb, sk_rst_convert_drop_reason(drop_reason));
inet_twsk_deschedule_put(inet_twsk(sk));
goto discard_it;
case TCP_TW_SUCCESS:
;
}
goto discard_it;
}
tcp/udp: Make early_demux back namespacified. Commit e21145a9871a ("ipv4: namespacify ip_early_demux sysctl knob") made it possible to enable/disable early_demux on a per-netns basis. Then, we introduced two knobs, tcp_early_demux and udp_early_demux, to switch it for TCP/UDP in commit dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp"). However, the .proc_handler() was wrong and actually disabled us from changing the behaviour in each netns. We can execute early_demux if net.ipv4.ip_early_demux is on and each proto .early_demux() handler is not NULL. When we toggle (tcp|udp)_early_demux, the change itself is saved in each netns variable, but the .early_demux() handler is a global variable, so the handler is switched based on the init_net's sysctl variable. Thus, netns (tcp|udp)_early_demux knobs have nothing to do with the logic. Whether we CAN execute proto .early_demux() is always decided by init_net's sysctl knob, and whether we DO it or not is by each netns ip_early_demux knob. This patch namespacifies (tcp|udp)_early_demux again. For now, the users of the .early_demux() handler are TCP and UDP only, and they are called directly to avoid retpoline. So, we can remove the .early_demux() handler from inet6?_protos and need not dereference them in ip6?_rcv_finish_core(). If another proto needs .early_demux(), we can restore it at that time. Fixes: dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20220713175207.7727-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-14 01:52:07 +08:00
void tcp_v6_early_demux(struct sk_buff *skb)
{
struct net *net = dev_net(skb->dev);
const struct ipv6hdr *hdr;
const struct tcphdr *th;
struct sock *sk;
if (skb->pkt_type != PACKET_HOST)
return;
if (!pskb_may_pull(skb, skb_transport_offset(skb) + sizeof(struct tcphdr)))
return;
hdr = ipv6_hdr(skb);
th = tcp_hdr(skb);
if (th->doff < sizeof(struct tcphdr) / 4)
return;
/* Note : We use inet6_iif() here, not tcp_v6_iif() */
sk = __inet6_lookup_established(net, net->ipv4.tcp_death_row.hashinfo,
&hdr->saddr, th->source,
&hdr->daddr, ntohs(th->dest),
inet6_iif(skb), inet6_sdif(skb));
if (sk) {
skb->sk = sk;
skb->destructor = sock_edemux;
if (sk_fullsock(sk)) {
inet: fully convert sk->sk_rx_dst to RCU rules syzbot reported various issues around early demux, one being included in this changelog [1] sk->sk_rx_dst is using RCU protection without clearly documenting it. And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv() are not following standard RCU rules. [a] dst_release(dst); [b] sk->sk_rx_dst = NULL; They look wrong because a delete operation of RCU protected pointer is supposed to clear the pointer before the call_rcu()/synchronize_rcu() guarding actual memory freeing. In some cases indeed, dst could be freed before [b] is done. We could cheat by clearing sk_rx_dst before calling dst_release(), but this seems the right time to stick to standard RCU annotations and debugging facilities. [1] BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline] BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204 CPU: 0 PID: 9204 Comm: syz-executor.5 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 dst_check include/net/dst.h:470 [inline] tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792 ip_rcv_finish_core.constprop.0+0x15de/0x1e80 net/ipv4/ip_input.c:340 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 common_interrupt+0x52/0xc0 arch/x86/kernel/irq.c:240 asm_common_interrupt+0x1e/0x40 arch/x86/include/asm/idtentry.h:629 RIP: 0033:0x7f5e972bfd57 Code: 39 d1 73 14 0f 1f 80 00 00 00 00 48 8b 50 f8 48 83 e8 08 48 39 ca 77 f3 48 39 c3 73 3e 48 89 13 48 8b 50 f8 48 89 38 49 8b 0e <48> 8b 3e 48 83 c3 08 48 83 c6 08 eb bc 48 39 d1 72 9e 48 39 d0 73 RSP: 002b:00007fff8a413210 EFLAGS: 00000283 RAX: 00007f5e97108990 RBX: 00007f5e97108338 RCX: ffffffff81d3aa45 RDX: ffffffff81d3aa45 RSI: 00007f5e97108340 RDI: ffffffff81d3aa45 RBP: 00007f5e97107eb8 R08: 00007f5e97108d88 R09: 0000000093c2e8d9 R10: 0000000000000000 R11: 0000000000000000 R12: 00007f5e97107eb0 R13: 00007f5e97108338 R14: 00007f5e97107ea8 R15: 0000000000000019 </TASK> Allocated by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x90/0xc0 mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x202/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 ip_route_input_slow+0x1817/0x3a20 net/ipv4/route.c:2340 ip_route_input_rcu net/ipv4/route.c:2470 [inline] ip_route_input_noref+0x116/0x2a0 net/ipv4/route.c:2415 ip_rcv_finish_core.constprop.0+0x288/0x1e80 net/ipv4/ip_input.c:354 ip_list_rcv_finish.constprop.0+0x1b2/0x6e0 net/ipv4/ip_input.c:583 ip_sublist_rcv net/ipv4/ip_input.c:609 [inline] ip_list_rcv+0x34e/0x490 net/ipv4/ip_input.c:644 __netif_receive_skb_list_ptype net/core/dev.c:5508 [inline] __netif_receive_skb_list_core+0x549/0x8e0 net/core/dev.c:5556 __netif_receive_skb_list net/core/dev.c:5608 [inline] netif_receive_skb_list_internal+0x75e/0xd80 net/core/dev.c:5699 gro_normal_list net/core/dev.c:5853 [inline] gro_normal_list net/core/dev.c:5849 [inline] napi_complete_done+0x1f1/0x880 net/core/dev.c:6590 virtqueue_napi_complete drivers/net/virtio_net.c:339 [inline] virtnet_poll+0xca2/0x11b0 drivers/net/virtio_net.c:1557 __napi_poll+0xaf/0x440 net/core/dev.c:7023 napi_poll net/core/dev.c:7090 [inline] net_rx_action+0x801/0xb40 net/core/dev.c:7177 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Freed by task 13: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xff/0x130 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:1723 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1749 slab_free mm/slub.c:3513 [inline] kmem_cache_free+0xbd/0x5d0 mm/slub.c:3530 dst_destroy+0x2d6/0x3f0 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2506 [inline] rcu_core+0x7ab/0x1470 kernel/rcu/tree.c:2741 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xf5/0x120 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:2985 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3065 dst_release net/core/dst.c:177 [inline] dst_release+0x79/0xe0 net/core/dst.c:167 tcp_v4_do_rcv+0x612/0x8d0 net/ipv4/tcp_ipv4.c:1712 sk_backlog_rcv include/net/sock.h:1030 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2768 release_sock+0x54/0x1b0 net/core/sock.c:3300 tcp_sendmsg+0x36/0x40 net/ipv4/tcp.c:1441 inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:819 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x289/0x3c0 net/socket.c:1057 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write+0x429/0x660 fs/read_write.c:503 vfs_write+0x7cd/0xae0 fs/read_write.c:590 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88807f1cb700 which belongs to the cache ip_dst_cache of size 176 The buggy address is located 58 bytes inside of 176-byte region [ffff88807f1cb700, ffff88807f1cb7b0) The buggy address belongs to the page: page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 dead000000000100 dead000000000122 ffff8881413bb780 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191 alloc_slab_page mm/slub.c:1793 [inline] allocate_slab mm/slub.c:1930 [inline] new_slab+0x32d/0x4a0 mm/slub.c:1993 ___slab_alloc+0x918/0xfe0 mm/slub.c:3022 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109 slab_alloc_node mm/slub.c:3200 [inline] slab_alloc mm/slub.c:3242 [inline] kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247 dst_alloc+0x146/0x1f0 net/core/dst.c:92 rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613 __mkroute_output net/ipv4/route.c:2564 [inline] ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791 ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619 __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850 ip_route_output_key include/net/route.h:142 [inline] geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809 geneve_xmit_skb drivers/net/geneve.c:899 [inline] geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082 __netdev_start_xmit include/linux/netdevice.h:4994 [inline] netdev_start_xmit include/linux/netdevice.h:5008 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606 __dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3234 [inline] kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078 sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575 mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754 add_grhead+0x265/0x330 net/ipv6/mcast.c:1857 add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995 mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242 mld_send_initial_cr net/ipv6/mcast.c:1232 [inline] mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20211220143330.680945-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20 22:33:30 +08:00
struct dst_entry *dst = rcu_dereference(sk->sk_rx_dst);
if (dst)
dst = dst_check(dst, sk->sk_rx_dst_cookie);
if (dst &&
sk->sk_rx_dst_ifindex == skb->skb_iif)
skb_dst_set_noref(skb, dst);
}
}
}
static struct timewait_sock_ops tcp6_timewait_sock_ops = {
.twsk_obj_size = sizeof(struct tcp6_timewait_sock),
.twsk_unique = tcp_twsk_unique,
.twsk_destructor = tcp_twsk_destructor,
};
INDIRECT_CALLABLE_SCOPE void tcp_v6_send_check(struct sock *sk, struct sk_buff *skb)
{
__tcp_v6_send_check(skb, &sk->sk_v6_rcv_saddr, &sk->sk_v6_daddr);
}
const struct inet_connection_sock_af_ops ipv6_specific = {
.queue_xmit = inet6_csk_xmit,
.send_check = tcp_v6_send_check,
.rebuild_header = inet6_sk_rebuild_header,
.sk_rx_dst_set = inet6_sk_rx_dst_set,
.conn_request = tcp_v6_conn_request,
.syn_recv_sock = tcp_v6_syn_recv_sock,
.net_header_len = sizeof(struct ipv6hdr),
.setsockopt = ipv6_setsockopt,
.getsockopt = ipv6_getsockopt,
.addr2sockaddr = inet6_csk_addr2sockaddr,
.sockaddr_len = sizeof(struct sockaddr_in6),
.mtu_reduced = tcp_v6_mtu_reduced,
};
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
static const struct tcp_sock_af_ops tcp_sock_ipv6_specific = {
#ifdef CONFIG_TCP_MD5SIG
.md5_lookup = tcp_v6_md5_lookup,
.calc_md5_hash = tcp_v6_md5_hash_skb,
.md5_parse = tcp_v6_parse_md5_keys,
#endif
#ifdef CONFIG_TCP_AO
.ao_lookup = tcp_v6_ao_lookup,
.calc_ao_hash = tcp_v6_ao_hash_skb,
.ao_parse = tcp_v6_parse_ao,
.ao_calc_key_sk = tcp_v6_ao_calc_key_sk,
#endif
};
#endif
/*
* TCP over IPv4 via INET6 API
*/
static const struct inet_connection_sock_af_ops ipv6_mapped = {
.queue_xmit = ip_queue_xmit,
.send_check = tcp_v4_send_check,
.rebuild_header = inet_sk_rebuild_header,
net: tcp: ipv6_mapped needs sk_rx_dst_set method commit 5d299f3d3c8a2fb (net: ipv6: fix TCP early demux) added a regression for ipv6_mapped case. [ 67.422369] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 67.449678] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 92.631060] BUG: unable to handle kernel NULL pointer dereference at (null) [ 92.631435] IP: [< (null)>] (null) [ 92.631645] PGD 0 [ 92.631846] Oops: 0010 [#1] SMP [ 92.632095] Modules linked in: autofs4 sunrpc ipv6 dm_mirror dm_region_hash dm_log dm_multipath dm_mod video sbs sbshc battery ac lp parport sg snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device pcspkr snd_pcm_oss snd_mixer_oss snd_pcm snd_timer serio_raw button floppy snd i2c_i801 i2c_core soundcore snd_page_alloc shpchp ide_cd_mod cdrom microcode ehci_hcd ohci_hcd uhci_hcd [ 92.634294] CPU 0 [ 92.634294] Pid: 4469, comm: sendmail Not tainted 3.6.0-rc1 #3 [ 92.634294] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 92.634294] RSP: 0018:ffff880245fc7cb0 EFLAGS: 00010282 [ 92.634294] RAX: ffffffffa01985f0 RBX: ffff88024827ad00 RCX: 0000000000000000 [ 92.634294] RDX: 0000000000000218 RSI: ffff880254735380 RDI: ffff88024827ad00 [ 92.634294] RBP: ffff880245fc7cc8 R08: 0000000000000001 R09: 0000000000000000 [ 92.634294] R10: 0000000000000000 R11: ffff880245fc7bf8 R12: ffff880254735380 [ 92.634294] R13: ffff880254735380 R14: 0000000000000000 R15: 7fffffffffff0218 [ 92.634294] FS: 00007f4516ccd6f0(0000) GS:ffff880256600000(0000) knlGS:0000000000000000 [ 92.634294] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 92.634294] CR2: 0000000000000000 CR3: 0000000245ed1000 CR4: 00000000000007f0 [ 92.634294] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 92.634294] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 92.634294] Process sendmail (pid: 4469, threadinfo ffff880245fc6000, task ffff880254b8cac0) [ 92.634294] Stack: [ 92.634294] ffffffff813837a7 ffff88024827ad00 ffff880254b6b0e8 ffff880245fc7d68 [ 92.634294] ffffffff81385083 00000000001d2680 ffff8802547353a8 ffff880245fc7d18 [ 92.634294] ffffffff8105903a ffff88024827ad60 0000000000000002 00000000000000ff [ 92.634294] Call Trace: [ 92.634294] [<ffffffff813837a7>] ? tcp_finish_connect+0x2c/0xfa [ 92.634294] [<ffffffff81385083>] tcp_rcv_state_process+0x2b6/0x9c6 [ 92.634294] [<ffffffff8105903a>] ? sched_clock_cpu+0xc3/0xd1 [ 92.634294] [<ffffffff81059073>] ? local_clock+0x2b/0x3c [ 92.634294] [<ffffffff8138caf3>] tcp_v4_do_rcv+0x63a/0x670 [ 92.634294] [<ffffffff8133278e>] release_sock+0x128/0x1bd [ 92.634294] [<ffffffff8139f060>] __inet_stream_connect+0x1b1/0x352 [ 92.634294] [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f [ 92.634294] [<ffffffff8104b333>] ? wake_up_bit+0x25/0x25 [ 92.634294] [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f [ 92.634294] [<ffffffff8139f223>] ? inet_stream_connect+0x22/0x4b [ 92.634294] [<ffffffff8139f234>] inet_stream_connect+0x33/0x4b [ 92.634294] [<ffffffff8132e8cf>] sys_connect+0x78/0x9e [ 92.634294] [<ffffffff813fd407>] ? sysret_check+0x1b/0x56 [ 92.634294] [<ffffffff81088503>] ? __audit_syscall_entry+0x195/0x1c8 [ 92.634294] [<ffffffff811cc26e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 92.634294] [<ffffffff813fd3e2>] system_call_fastpath+0x16/0x1b [ 92.634294] Code: Bad RIP value. [ 92.634294] RIP [< (null)>] (null) [ 92.634294] RSP <ffff880245fc7cb0> [ 92.634294] CR2: 0000000000000000 [ 92.648982] ---[ end trace 24e2bed94314c8d9 ]--- [ 92.649146] Kernel panic - not syncing: Fatal exception in interrupt Fix this using inet_sk_rx_dst_set(), and export this function in case IPv6 is modular. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-09 22:11:00 +08:00
.sk_rx_dst_set = inet_sk_rx_dst_set,
.conn_request = tcp_v6_conn_request,
.syn_recv_sock = tcp_v6_syn_recv_sock,
.net_header_len = sizeof(struct iphdr),
.setsockopt = ipv6_setsockopt,
.getsockopt = ipv6_getsockopt,
.addr2sockaddr = inet6_csk_addr2sockaddr,
.sockaddr_len = sizeof(struct sockaddr_in6),
.mtu_reduced = tcp_v4_mtu_reduced,
};
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
static const struct tcp_sock_af_ops tcp_sock_ipv6_mapped_specific = {
#ifdef CONFIG_TCP_MD5SIG
.md5_lookup = tcp_v4_md5_lookup,
.calc_md5_hash = tcp_v4_md5_hash_skb,
.md5_parse = tcp_v6_parse_md5_keys,
#endif
#ifdef CONFIG_TCP_AO
.ao_lookup = tcp_v6_ao_lookup,
.calc_ao_hash = tcp_v4_ao_hash_skb,
.ao_parse = tcp_v6_parse_ao,
.ao_calc_key_sk = tcp_v4_ao_calc_key_sk,
#endif
};
#endif
/* NOTE: A lot of things set to zero explicitly by call to
* sk_alloc() so need not be done here.
*/
static int tcp_v6_init_sock(struct sock *sk)
{
struct inet_connection_sock *icsk = inet_csk(sk);
tcp_init_sock(sk);
icsk->icsk_af_ops = &ipv6_specific;
#if defined(CONFIG_TCP_MD5SIG) || defined(CONFIG_TCP_AO)
tcp_sk(sk)->af_specific = &tcp_sock_ipv6_specific;
#endif
return 0;
}
#ifdef CONFIG_PROC_FS
/* Proc filesystem TCPv6 sock list dumping. */
static void get_openreq6(struct seq_file *seq,
const struct request_sock *req, int i)
{
long ttd = req->rsk_timer.expires - jiffies;
const struct in6_addr *src = &inet_rsk(req)->ir_v6_loc_addr;
const struct in6_addr *dest = &inet_rsk(req)->ir_v6_rmt_addr;
if (ttd < 0)
ttd = 0;
seq_printf(seq,
"%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
"%02X %08X:%08X %02X:%08lX %08X %5u %8d %d %d %pK\n",
i,
src->s6_addr32[0], src->s6_addr32[1],
src->s6_addr32[2], src->s6_addr32[3],
inet_rsk(req)->ir_num,
dest->s6_addr32[0], dest->s6_addr32[1],
dest->s6_addr32[2], dest->s6_addr32[3],
ntohs(inet_rsk(req)->ir_rmt_port),
TCP_SYN_RECV,
0, 0, /* could print option size, but that is af dependent. */
1, /* timers active (only the expire timer) */
jiffies_to_clock_t(ttd),
tcp: better retrans tracking for defer-accept For passive TCP connections using TCP_DEFER_ACCEPT facility, we incorrectly increment req->retrans each time timeout triggers while no SYNACK is sent. SYNACK are not sent for TCP_DEFER_ACCEPT that were established (for which we received the ACK from client). Only the last SYNACK is sent so that we can receive again an ACK from client, to move the req into accept queue. We plan to change this later to avoid the useless retransmit (and potential problem as this SYNACK could be lost) TCP_INFO later gives wrong information to user, claiming imaginary retransmits. Decouple req->retrans field into two independent fields : num_retrans : number of retransmit num_timeout : number of timeouts num_timeout is the counter that is incremented at each timeout, regardless of actual SYNACK being sent or not, and used to compute the exponential timeout. Introduce inet_rtx_syn_ack() helper to increment num_retrans only if ->rtx_syn_ack() succeeded. Use inet_rtx_syn_ack() from tcp_check_req() to increment num_retrans when we re-send a SYNACK in answer to a (retransmitted) SYN. Prior to this patch, we were not counting these retransmits. Change tcp_v[46]_rtx_synack() to increment TCP_MIB_RETRANSSEGS only if a synack packet was successfully queued. Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Elliott Hughes <enh@google.com> Cc: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-28 07:16:46 +08:00
req->num_timeout,
from_kuid_munged(seq_user_ns(seq),
sock_i_uid(req->rsk_listener)),
0, /* non standard timer */
0, /* open_requests have no inode */
0, req);
}
static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i)
{
const struct in6_addr *dest, *src;
__u16 destp, srcp;
int timer_active;
unsigned long timer_expires;
const struct inet_sock *inet = inet_sk(sp);
const struct tcp_sock *tp = tcp_sk(sp);
const struct inet_connection_sock *icsk = inet_csk(sp);
const struct fastopen_queue *fastopenq = &icsk->icsk_accept_queue.fastopenq;
int rx_queue;
int state;
dest = &sp->sk_v6_daddr;
src = &sp->sk_v6_rcv_saddr;
destp = ntohs(inet->inet_dport);
srcp = ntohs(inet->inet_sport);
if (icsk->icsk_pending == ICSK_TIME_RETRANS ||
tcp: add reordering timer in RACK loss detection This patch makes RACK install a reordering timer when it suspects some packets might be lost, but wants to delay the decision a little bit to accomodate reordering. It does not create a new timer but instead repurposes the existing RTO timer, because both are meant to retransmit packets. Specifically it arms a timer ICSK_TIME_REO_TIMEOUT when the RACK timing check fails. The wait time is set to RACK.RTT + RACK.reo_wnd - (NOW - Packet.xmit_time) + fudge This translates to expecting a packet (Packet) should take (RACK.RTT + RACK.reo_wnd + fudge) to deliver after it was sent. When there are multiple packets that need a timer, we use one timer with the maximum timeout. Therefore the timer conservatively uses the maximum window to expire N packets by one timeout, instead of N timeouts to expire N packets sent at different times. The fudge factor is 2 jiffies to ensure when the timer fires, all the suspected packets would exceed the deadline and be marked lost by tcp_rack_detect_loss(). It has to be at least 1 jiffy because the clock may tick between calling icsk_reset_xmit_timer(timeout) and actually hang the timer. The next jiffy is to lower-bound the timeout to 2 jiffies when reo_wnd is < 1ms. When the reordering timer fires (tcp_rack_reo_timeout): If we aren't in Recovery we'll enter fast recovery and force fast retransmit. This is very similar to the early retransmit (RFC5827) except RACK is not constrained to only enter recovery for small outstanding flights. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-13 14:11:33 +08:00
icsk->icsk_pending == ICSK_TIME_REO_TIMEOUT ||
icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) {
timer_active = 1;
timer_expires = icsk->icsk_timeout;
} else if (icsk->icsk_pending == ICSK_TIME_PROBE0) {
timer_active = 4;
timer_expires = icsk->icsk_timeout;
} else if (timer_pending(&sp->sk_timer)) {
timer_active = 2;
timer_expires = sp->sk_timer.expires;
} else {
timer_active = 0;
timer_expires = jiffies;
}
state = inet_sk_state_load(sp);
if (state == TCP_LISTEN)
rx_queue = READ_ONCE(sp->sk_ack_backlog);
else
/* Because we don't lock the socket,
* we might find a transient negative value.
*/
tcp: annotate tp->rcv_nxt lockless reads There are few places where we fetch tp->rcv_nxt while this field can change from IRQ or other cpu. We need to add READ_ONCE() annotations, and also make sure write sides use corresponding WRITE_ONCE() to avoid store-tearing. Note that tcp_inq_hint() was already using READ_ONCE(tp->rcv_nxt) syzbot reported : BUG: KCSAN: data-race in tcp_poll / tcp_queue_rcv write to 0xffff888120425770 of 4 bytes by interrupt on cpu 0: tcp_rcv_nxt_update net/ipv4/tcp_input.c:3365 [inline] tcp_queue_rcv+0x180/0x380 net/ipv4/tcp_input.c:4638 tcp_rcv_established+0xbf1/0xf50 net/ipv4/tcp_input.c:5616 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1542 tcp_v4_rcv+0x1a03/0x1bf0 net/ipv4/tcp_ipv4.c:1923 ip_protocol_deliver_rcu+0x51/0x470 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:305 [inline] NF_HOOK include/linux/netfilter.h:299 [inline] ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5004 __netif_receive_skb+0x37/0xf0 net/core/dev.c:5118 netif_receive_skb_internal+0x59/0x190 net/core/dev.c:5208 napi_skb_finish net/core/dev.c:5671 [inline] napi_gro_receive+0x28f/0x330 net/core/dev.c:5704 receive_buf+0x284/0x30b0 drivers/net/virtio_net.c:1061 read to 0xffff888120425770 of 4 bytes by task 7254 on cpu 1: tcp_stream_is_readable net/ipv4/tcp.c:480 [inline] tcp_poll+0x204/0x6b0 net/ipv4/tcp.c:554 sock_poll+0xed/0x250 net/socket.c:1256 vfs_poll include/linux/poll.h:90 [inline] ep_item_poll.isra.0+0x90/0x190 fs/eventpoll.c:892 ep_send_events_proc+0x113/0x5c0 fs/eventpoll.c:1749 ep_scan_ready_list.constprop.0+0x189/0x500 fs/eventpoll.c:704 ep_send_events fs/eventpoll.c:1793 [inline] ep_poll+0xe3/0x900 fs/eventpoll.c:1930 do_epoll_wait+0x162/0x180 fs/eventpoll.c:2294 __do_sys_epoll_pwait fs/eventpoll.c:2325 [inline] __se_sys_epoll_pwait fs/eventpoll.c:2311 [inline] __x64_sys_epoll_pwait+0xcd/0x170 fs/eventpoll.c:2311 do_syscall_64+0xcf/0x2f0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7254 Comm: syz-fuzzer Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11 11:17:39 +08:00
rx_queue = max_t(int, READ_ONCE(tp->rcv_nxt) -
READ_ONCE(tp->copied_seq), 0);
seq_printf(seq,
"%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
"%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %lu %lu %u %u %d\n",
i,
src->s6_addr32[0], src->s6_addr32[1],
src->s6_addr32[2], src->s6_addr32[3], srcp,
dest->s6_addr32[0], dest->s6_addr32[1],
dest->s6_addr32[2], dest->s6_addr32[3], destp,
state,
READ_ONCE(tp->write_seq) - tp->snd_una,
rx_queue,
timer_active,
jiffies_delta_to_clock_t(timer_expires - jiffies),
icsk->icsk_retransmits,
from_kuid_munged(seq_user_ns(seq), sock_i_uid(sp)),
icsk->icsk_probes_out,
sock_i_ino(sp),
refcount_read(&sp->sk_refcnt), sp,
jiffies_to_clock_t(icsk->icsk_rto),
jiffies_to_clock_t(icsk->icsk_ack.ato),
(icsk->icsk_ack.quick << 1) | inet_csk_in_pingpong_mode(sp),
tcp_snd_cwnd(tp),
state == TCP_LISTEN ?
fastopenq->max_qlen :
(tcp_in_initial_slowstart(tp) ? -1 : tp->snd_ssthresh)
);
}
static void get_timewait6_sock(struct seq_file *seq,
struct inet_timewait_sock *tw, int i)
{
tcp/dccp: get rid of central timewait timer Using a timer wheel for timewait sockets was nice ~15 years ago when memory was expensive and machines had a single processor. This does not scale, code is ugly and source of huge latencies (Typically 30 ms have been seen, cpus spinning on death_lock spinlock.) We can afford to use an extra 64 bytes per timewait sock and spread timewait load to all cpus to have better behavior. Tested: On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1 on the target (lpaa24) Before patch : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 419594 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 437171 While test is running, we can observe 25 or even 33 ms latencies. lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2 lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2 After patch : About 90% increase of throughput : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 810442 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 800992 And latencies are kept to minimal values during this load, even if network utilization is 90% higher : lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-13 09:51:09 +08:00
long delta = tw->tw_timer.expires - jiffies;
const struct in6_addr *dest, *src;
__u16 destp, srcp;
dest = &tw->tw_v6_daddr;
src = &tw->tw_v6_rcv_saddr;
destp = ntohs(tw->tw_dport);
srcp = ntohs(tw->tw_sport);
seq_printf(seq,
"%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
net: convert %p usage to %pK The %pK format specifier is designed to hide exposed kernel pointers, specifically via /proc interfaces. Exposing these pointers provides an easy target for kernel write vulnerabilities, since they reveal the locations of writable structures containing easily triggerable function pointers. The behavior of %pK depends on the kptr_restrict sysctl. If kptr_restrict is set to 0, no deviation from the standard %p behavior occurs. If kptr_restrict is set to 1, the default, if the current user (intended to be a reader via seq_printf(), etc.) does not have CAP_SYSLOG (currently in the LSM tree), kernel pointers using %pK are printed as 0's. If kptr_restrict is set to 2, kernel pointers using %pK are printed as 0's regardless of privileges. Replacing with 0's was chosen over the default "(null)", which cannot be parsed by userland %p, which expects "(nil)". The supporting code for kptr_restrict and %pK are currently in the -mm tree. This patch converts users of %p in net/ to %pK. Cases of printing pointers to the syslog are not covered, since this would eliminate useful information for postmortem debugging and the reading of the syslog is already optionally protected by the dmesg_restrict sysctl. Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com> Cc: James Morris <jmorris@namei.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Thomas Graf <tgraf@infradead.org> Cc: Eugene Teo <eugeneteo@kernel.org> Cc: Kees Cook <kees.cook@canonical.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23 20:17:35 +08:00
"%02X %08X:%08X %02X:%08lX %08X %5d %8d %d %d %pK\n",
i,
src->s6_addr32[0], src->s6_addr32[1],
src->s6_addr32[2], src->s6_addr32[3], srcp,
dest->s6_addr32[0], dest->s6_addr32[1],
dest->s6_addr32[2], dest->s6_addr32[3], destp,
tw->tw_substate, 0, 0,
3, jiffies_delta_to_clock_t(delta), 0, 0, 0, 0,
refcount_read(&tw->tw_refcnt), tw);
}
static int tcp6_seq_show(struct seq_file *seq, void *v)
{
struct tcp_iter_state *st;
tcp/dccp: remove twchain TCP listener refactoring, part 3 : Our goal is to hash SYN_RECV sockets into main ehash for fast lookup, and parallel SYN processing. Current inet_ehash_bucket contains two chains, one for ESTABLISH (and friend states) sockets, another for TIME_WAIT sockets only. As the hash table is sized to get at most one socket per bucket, it makes little sense to have separate twchain, as it makes the lookup slightly more complicated, and doubles hash table memory usage. If we make sure all socket types have the lookup keys at the same offsets, we can use a generic and faster lookup. It turns out TIME_WAIT and ESTABLISHED sockets already have common lookup fields for IPv4. [ INET_TW_MATCH() is no longer needed ] I'll provide a follow-up to factorize IPv6 lookup as well, to remove INET6_TW_MATCH() This way, SYN_RECV pseudo sockets will be supported the same. A new sock_gen_put() helper is added, doing either a sock_put() or inet_twsk_put() [ and will support SYN_RECV later ]. Note this helper should only be called in real slow path, when rcu lookup found a socket that was moved to another identity (freed/reused immediately), but could eventually be used in other contexts, like sock_edemux() Before patch : dmesg | grep "TCP established" TCP established hash table entries: 524288 (order: 11, 8388608 bytes) After patch : TCP established hash table entries: 524288 (order: 10, 4194304 bytes) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 15:22:02 +08:00
struct sock *sk = v;
if (v == SEQ_START_TOKEN) {
seq_puts(seq,
" sl "
"local_address "
"remote_address "
"st tx_queue rx_queue tr tm->when retrnsmt"
" uid timeout inode\n");
goto out;
}
st = seq->private;
if (sk->sk_state == TCP_TIME_WAIT)
get_timewait6_sock(seq, v, st->num);
else if (sk->sk_state == TCP_NEW_SYN_RECV)
get_openreq6(seq, v, st->num);
else
get_tcp6_sock(seq, v, st->num);
out:
return 0;
}
static const struct seq_operations tcp6_seq_ops = {
.show = tcp6_seq_show,
.start = tcp_seq_start,
.next = tcp_seq_next,
.stop = tcp_seq_stop,
};
static struct tcp_seq_afinfo tcp6_seq_afinfo = {
.family = AF_INET6,
};
int __net_init tcp6_proc_init(struct net *net)
{
if (!proc_create_net_data("tcp6", 0444, net->proc_net, &tcp6_seq_ops,
sizeof(struct tcp_iter_state), &tcp6_seq_afinfo))
return -ENOMEM;
return 0;
}
void tcp6_proc_exit(struct net *net)
{
remove_proc_entry("tcp6", net->proc_net);
}
#endif
struct proto tcpv6_prot = {
.name = "TCPv6",
.owner = THIS_MODULE,
.close = tcp_close,
bpf: Hooks for sys_connect == The problem == See description of the problem in the initial patch of this patch set. == The solution == The patch provides much more reliable in-kernel solution for the 2nd part of the problem: making outgoing connecttion from desired IP. It adds new attach types `BPF_CGROUP_INET4_CONNECT` and `BPF_CGROUP_INET6_CONNECT` for program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR` that can be used to override both source and destination of a connection at connect(2) time. Local end of connection can be bound to desired IP using newly introduced BPF-helper `bpf_bind()`. It allows to bind to only IP though, and doesn't support binding to port, i.e. leverages `IP_BIND_ADDRESS_NO_PORT` socket option. There are two reasons for this: * looking for a free port is expensive and can affect performance significantly; * there is no use-case for port. As for remote end (`struct sockaddr *` passed by user), both parts of it can be overridden, remote IP and remote port. It's useful if an application inside cgroup wants to connect to another application inside same cgroup or to itself, but knows nothing about IP assigned to the cgroup. Support is added for IPv4 and IPv6, for TCP and UDP. IPv4 and IPv6 have separate attach types for same reason as sys_bind hooks, i.e. to prevent reading from / writing to e.g. user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound. == Implementation notes == The patch introduces new field in `struct proto`: `pre_connect` that is a pointer to a function with same signature as `connect` but is called before it. The reason is in some cases BPF hooks should be called way before control is passed to `sk->sk_prot->connect`. Specifically `inet_dgram_connect` autobinds socket before calling `sk->sk_prot->connect` and there is no way to call `bpf_bind()` from hooks from e.g. `ip4_datagram_connect` or `ip6_datagram_connect` since it'd cause double-bind. On the other hand `proto.pre_connect` provides a flexible way to add BPF hooks for connect only for necessary `proto` and call them at desired time before `connect`. Since `bpf_bind()` is allowed to bind only to IP and autobind in `inet_dgram_connect` binds only port there is no chance of double-bind. bpf_bind() sets `force_bind_address_no_port` to bind to only IP despite of value of `bind_address_no_port` socket field. bpf_bind() sets `with_lock` to `false` when calling to __inet_bind() and __inet6_bind() since all call-sites, where bpf_bind() is called, already hold socket lock. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-31 06:08:05 +08:00
.pre_connect = tcp_v6_pre_connect,
.connect = tcp_v6_connect,
.disconnect = tcp_disconnect,
.accept = inet_csk_accept,
.ioctl = tcp_ioctl,
.init = tcp_v6_init_sock,
.destroy = tcp_v4_destroy_sock,
.shutdown = tcp_shutdown,
.setsockopt = tcp_setsockopt,
.getsockopt = tcp_getsockopt,
.bpf_bypass_getsockopt = tcp_bpf_bypass_getsockopt,
.keepalive = tcp_set_keepalive,
.recvmsg = tcp_recvmsg,
.sendmsg = tcp_sendmsg,
.splice_eof = tcp_splice_eof,
.backlog_rcv = tcp_v6_do_rcv,
tcp: TCP Small Queues This introduce TSQ (TCP Small Queues) TSQ goal is to reduce number of TCP packets in xmit queues (qdisc & device queues), to reduce RTT and cwnd bias, part of the bufferbloat problem. sk->sk_wmem_alloc not allowed to grow above a given limit, allowing no more than ~128KB [1] per tcp socket in qdisc/dev layers at a given time. TSO packets are sized/capped to half the limit, so that we have two TSO packets in flight, allowing better bandwidth use. As a side effect, setting the limit to 40000 automatically reduces the standard gso max limit (65536) to 40000/2 : It can help to reduce latencies of high prio packets, having smaller TSO packets. This means we divert sock_wfree() to a tcp_wfree() handler, to queue/send following frames when skb_orphan() [2] is called for the already queued skbs. Results on my dev machines (tg3/ixgbe nics) are really impressive, using standard pfifo_fast, and with or without TSO/GSO. Without reduction of nominal bandwidth, we have reduction of buffering per bulk sender : < 1ms on Gbit (instead of 50ms with TSO) < 8ms on 100Mbit (instead of 132 ms) I no longer have 4 MBytes backlogged in qdisc by a single netperf session, and both side socket autotuning no longer use 4 Mbytes. As skb destructor cannot restart xmit itself ( as qdisc lock might be taken at this point ), we delegate the work to a tasklet. We use one tasklest per cpu for performance reasons. If tasklet finds a socket owned by the user, it sets TSQ_OWNED flag. This flag is tested in a new protocol method called from release_sock(), to eventually send new segments. [1] New /proc/sys/net/ipv4/tcp_limit_output_bytes tunable [2] skb_orphan() is usually called at TX completion time, but some drivers call it in their start_xmit() handler. These drivers should at least use BQL, or else a single TCP session can still fill the whole NIC TX ring, since TSQ will have no effect. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dave Taht <dave.taht@bufferbloat.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11 13:50:31 +08:00
.release_cb = tcp_release_cb,
.hash = inet6_hash,
[SOCK] proto: Add hashinfo member to struct proto This way we can remove TCP and DCCP specific versions of sk->sk_prot->get_port: both v4 and v6 use inet_csk_get_port sk->sk_prot->hash: inet_hash is directly used, only v6 need a specific version to deal with mapped sockets sk->sk_prot->unhash: both v4 and v6 use inet_hash directly struct inet_connection_sock_af_ops also gets a new member, bind_conflict, so that inet_csk_get_port can find the per family routine. Now only the lookup routines receive as a parameter a struct inet_hashtable. With this we further reuse code, reducing the difference among INET transport protocols. Eventually work has to be done on UDP and SCTP to make them share this infrastructure and get as a bonus inet_diag interfaces so that iproute can be used with these protocols. net-2.6/net/ipv4/inet_hashtables.c: struct proto | +8 struct inet_connection_sock_af_ops | +8 2 structs changed __inet_hash_nolisten | +18 __inet_hash | -210 inet_put_port | +8 inet_bind_bucket_create | +1 __inet_hash_connect | -8 5 functions changed, 27 bytes added, 218 bytes removed, diff: -191 net-2.6/net/core/sock.c: proto_seq_show | +3 1 function changed, 3 bytes added, diff: +3 net-2.6/net/ipv4/inet_connection_sock.c: inet_csk_get_port | +15 1 function changed, 15 bytes added, diff: +15 net-2.6/net/ipv4/tcp.c: tcp_set_state | -7 1 function changed, 7 bytes removed, diff: -7 net-2.6/net/ipv4/tcp_ipv4.c: tcp_v4_get_port | -31 tcp_v4_hash | -48 tcp_v4_destroy_sock | -7 tcp_v4_syn_recv_sock | -2 tcp_unhash | -179 5 functions changed, 267 bytes removed, diff: -267 net-2.6/net/ipv6/inet6_hashtables.c: __inet6_hash | +8 1 function changed, 8 bytes added, diff: +8 net-2.6/net/ipv4/inet_hashtables.c: inet_unhash | +190 inet_hash | +242 2 functions changed, 432 bytes added, diff: +432 vmlinux: 16 functions changed, 485 bytes added, 492 bytes removed, diff: -7 /home/acme/git/net-2.6/net/ipv6/tcp_ipv6.c: tcp_v6_get_port | -31 tcp_v6_hash | -7 tcp_v6_syn_recv_sock | -9 3 functions changed, 47 bytes removed, diff: -47 /home/acme/git/net-2.6/net/dccp/proto.c: dccp_destroy_sock | -7 dccp_unhash | -179 dccp_hash | -49 dccp_set_state | -7 dccp_done | +1 5 functions changed, 1 bytes added, 242 bytes removed, diff: -241 /home/acme/git/net-2.6/net/dccp/ipv4.c: dccp_v4_get_port | -31 dccp_v4_request_recv_sock | -2 2 functions changed, 33 bytes removed, diff: -33 /home/acme/git/net-2.6/net/dccp/ipv6.c: dccp_v6_get_port | -31 dccp_v6_hash | -7 dccp_v6_request_recv_sock | +5 3 functions changed, 5 bytes added, 38 bytes removed, diff: -33 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 20:06:04 +08:00
.unhash = inet_unhash,
.get_port = inet_csk_get_port,
net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in __inet_bind() is not handled properly. While the return value is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and exit: err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk); if (err) { inet->inet_saddr = inet->inet_rcv_saddr = 0; goto out_release_sock; } Let's take UDP for example and see what will happen. For UDP socket, it will be added to 'udp_prot.h.udp_table->hash' and 'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port() called success. If 'inet->inet_rcv_saddr' is specified here, then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong to (because inet_saddr is changed to 0), and UDP packet received will not be passed to this sock. If 'inet->inet_rcv_saddr' is not specified here, the sock will work fine, as it can receive packet properly, which is wired, as the 'bind()' is already failed. To undo the get_port() operation, introduce the 'put_port' field for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP proto, it is udp_lib_unhash(); For icmp proto, it is ping_unhash(). Therefore, after sys_bind() fail caused by BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which means that it can try to be binded to another port. Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220106132022.3470772-2-imagedong@tencent.com
2022-01-06 21:20:20 +08:00
.put_port = inet_put_port,
#ifdef CONFIG_BPF_SYSCALL
.psock_update_sk_prot = tcp_bpf_update_proto,
#endif
.enter_memory_pressure = tcp_enter_memory_pressure,
.leave_memory_pressure = tcp_leave_memory_pressure,
tcp: TCP_NOTSENT_LOWAT socket option Idea of this patch is to add optional limitation of number of unsent bytes in TCP sockets, to reduce usage of kernel memory. TCP receiver might announce a big window, and TCP sender autotuning might allow a large amount of bytes in write queue, but this has little performance impact if a large part of this buffering is wasted : Write queue needs to be large only to deal with large BDP, not necessarily to cope with scheduling delays (incoming ACKS make room for the application to queue more bytes) For most workloads, using a value of 128 KB or less is OK to give applications enough time to react to POLLOUT events in time (or being awaken in a blocking sendmsg()) This patch adds two ways to set the limit : 1) Per socket option TCP_NOTSENT_LOWAT 2) A sysctl (/proc/sys/net/ipv4/tcp_notsent_lowat) for sockets not using TCP_NOTSENT_LOWAT socket option (or setting a zero value) Default value being UINT_MAX (0xFFFFFFFF), meaning this has no effect. This changes poll()/select()/epoll() to report POLLOUT only if number of unsent bytes is below tp->nosent_lowat Note this might increase number of sendmsg()/sendfile() calls when using non blocking sockets, and increase number of context switches for blocking sockets. Note this is not related to SO_SNDLOWAT (as SO_SNDLOWAT is defined as : Specify the minimum number of bytes in the buffer until the socket layer will pass the data to the protocol) Tested: netperf sessions, and watching /proc/net/protocols "memory" column for TCP With 200 concurrent netperf -t TCP_STREAM sessions, amount of kernel memory used by TCP buffers shrinks by ~55 % (20567 pages instead of 45458) lpq83:~# echo -1 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# (super_netperf 200 -t TCP_STREAM -H remote -l 90 &); sleep 60 ; grep TCP /proc/net/protocols TCPv6 1880 2 45458 no 208 yes ipv6 y y y y y y y y y y y y y n y y y y y TCP 1696 508 45458 no 208 yes kernel y y y y y y y y y y y y y n y y y y y lpq83:~# echo 131072 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# (super_netperf 200 -t TCP_STREAM -H remote -l 90 &); sleep 60 ; grep TCP /proc/net/protocols TCPv6 1880 2 20567 no 208 yes ipv6 y y y y y y y y y y y y y n y y y y y TCP 1696 508 20567 no 208 yes kernel y y y y y y y y y y y y y n y y y y y Using 128KB has no bad effect on the throughput or cpu usage of a single flow, although there is an increase of context switches. A bonus is that we hold socket lock for a shorter amount of time and should improve latencies of ACK processing. lpq83:~# echo -1 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# perf stat -e context-switches ./netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3 OMNI Send TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : +/-2.500% @ 99% conf. Local Remote Local Elapsed Throughput Throughput Local Local Remote Remote Local Remote Service Send Socket Recv Socket Send Time Units CPU CPU CPU CPU Service Service Demand Size Size Size (sec) Util Util Util Util Demand Demand Units Final Final % Method % Method 1651584 6291456 16384 20.00 17447.90 10^6bits/s 3.13 S -1.00 U 0.353 -1.000 usec/KB Performance counter stats for './netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3': 412,514 context-switches 200.034645535 seconds time elapsed lpq83:~# echo 131072 >/proc/sys/net/ipv4/tcp_notsent_lowat lpq83:~# perf stat -e context-switches ./netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3 OMNI Send TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : +/-2.500% @ 99% conf. Local Remote Local Elapsed Throughput Throughput Local Local Remote Remote Local Remote Service Send Socket Recv Socket Send Time Units CPU CPU CPU CPU Service Service Demand Size Size Size (sec) Util Util Util Util Demand Demand Units Final Final % Method % Method 1593240 6291456 16384 20.00 17321.16 10^6bits/s 3.35 S -1.00 U 0.381 -1.000 usec/KB Performance counter stats for './netperf -H 7.7.7.84 -t omni -l 20 -c -i10,3': 2,675,818 context-switches 200.029651391 seconds time elapsed Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-By: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-23 11:27:07 +08:00
.stream_memory_free = tcp_stream_memory_free,
.sockets_allocated = &tcp_sockets_allocated,
.memory_allocated = &tcp_memory_allocated,
.per_cpu_fw_alloc = &tcp_memory_per_cpu_fw_alloc,
.memory_pressure = &tcp_memory_pressure,
.orphan_count = &tcp_orphan_count,
.sysctl_mem = sysctl_tcp_mem,
.sysctl_wmem_offset = offsetof(struct net, ipv4.sysctl_tcp_wmem),
.sysctl_rmem_offset = offsetof(struct net, ipv4.sysctl_tcp_rmem),
.max_header = MAX_TCP_HEADER,
.obj_size = sizeof(struct tcp6_sock),
.ipv6_pinfo_offset = offsetof(struct tcp6_sock, inet6),
.slab_flags = SLAB_TYPESAFE_BY_RCU,
.twsk_prot = &tcp6_timewait_sock_ops,
.rsk_prot = &tcp6_request_sock_ops,
.h.hashinfo = NULL,
.no_autobind = true,
.diag_destroy = tcp_abort,
};
EXPORT_SYMBOL_GPL(tcpv6_prot);
static struct inet_protosw tcpv6_protosw = {
.type = SOCK_STREAM,
.protocol = IPPROTO_TCP,
.prot = &tcpv6_prot,
.ops = &inet6_stream_ops,
.flags = INET_PROTOSW_PERMANENT |
INET_PROTOSW_ICSK,
};
static int __net_init tcpv6_net_init(struct net *net)
{
return inet_ctl_sock_create(&net->ipv6.tcp_sk, PF_INET6,
SOCK_RAW, IPPROTO_TCP, net);
}
static void __net_exit tcpv6_net_exit(struct net *net)
{
inet_ctl_sock_destroy(net->ipv6.tcp_sk);
}
static struct pernet_operations tcpv6_net_ops = {
.init = tcpv6_net_init,
.exit = tcpv6_net_exit,
};
int __init tcpv6_init(void)
{
int ret;
net_hotdata.tcpv6_protocol = (struct inet6_protocol) {
.handler = tcp_v6_rcv,
.err_handler = tcp_v6_err,
.flags = INET6_PROTO_NOPOLICY | INET6_PROTO_FINAL,
};
ret = inet6_add_protocol(&net_hotdata.tcpv6_protocol, IPPROTO_TCP);
if (ret)
goto out;
/* register inet6 protocol */
ret = inet6_register_protosw(&tcpv6_protosw);
if (ret)
goto out_tcpv6_protocol;
ret = register_pernet_subsys(&tcpv6_net_ops);
if (ret)
goto out_tcpv6_protosw;
ret = mptcpv6_init();
if (ret)
goto out_tcpv6_pernet_subsys;
out:
return ret;
out_tcpv6_pernet_subsys:
unregister_pernet_subsys(&tcpv6_net_ops);
out_tcpv6_protosw:
inet6_unregister_protosw(&tcpv6_protosw);
out_tcpv6_protocol:
inet6_del_protocol(&net_hotdata.tcpv6_protocol, IPPROTO_TCP);
goto out;
}
void tcpv6_exit(void)
{
unregister_pernet_subsys(&tcpv6_net_ops);
inet6_unregister_protosw(&tcpv6_protosw);
inet6_del_protocol(&net_hotdata.tcpv6_protocol, IPPROTO_TCP);
}