crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
|
|
/*
|
|
|
|
* Glue Code for the AVX/AES-NI/GFNI assembler implementation of the ARIA Cipher
|
|
|
|
*
|
|
|
|
* Copyright (c) 2022 Taehee Yoo <ap420073@gmail.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <crypto/algapi.h>
|
|
|
|
#include <crypto/internal/simd.h>
|
|
|
|
#include <crypto/aria.h>
|
|
|
|
#include <linux/crypto.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
|
|
|
#include "ecb_cbc_helpers.h"
|
|
|
|
#include "aria-avx.h"
|
|
|
|
|
|
|
|
asmlinkage void aria_aesni_avx_encrypt_16way(const void *ctx, u8 *dst,
|
|
|
|
const u8 *src);
|
crypto: x86/aria - implement aria-avx2
aria-avx2 implementation uses AVX2, AES-NI, and GFNI.
It supports 32way parallel processing.
So, byteslicing code is changed to support 32way parallel.
And it exports some aria-avx functions such as encrypt() and decrypt().
There are two main logics, s-box layer and diffusion layer.
These codes are the same as aria-avx implementation.
But some instruction are exchanged because they don't support 256bit
registers.
Also, AES-NI doesn't support 256bit register.
So, aesenclast and aesdeclast are used twice like below:
vextracti128 $1, ymm0, xmm6;
vaesenclast xmm7, xmm0, xmm0;
vaesenclast xmm7, xmm6, xmm6;
vinserti128 $1, xmm6, ymm0, ymm0;
Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100:
ARIA-AVX2 with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption
tcrypt: 1 operation in 2003 cycles (1024 bytes)
tcrypt: 1 operation in 5867 cycles (4096 bytes)
tcrypt: 1 operation in 2358 cycles (1024 bytes)
tcrypt: 1 operation in 7295 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption
tcrypt: 1 operation in 2004 cycles (1024 bytes)
tcrypt: 1 operation in 5956 cycles (4096 bytes)
tcrypt: 1 operation in 2409 cycles (1024 bytes)
tcrypt: 1 operation in 7564 cycles (4096 bytes)
ARIA-AVX with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption
tcrypt: 1 operation in 2761 cycles (1024 bytes)
tcrypt: 1 operation in 9390 cycles (4096 bytes)
tcrypt: 1 operation in 3401 cycles (1024 bytes)
tcrypt: 1 operation in 11876 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption
tcrypt: 1 operation in 2735 cycles (1024 bytes)
tcrypt: 1 operation in 9424 cycles (4096 bytes)
tcrypt: 1 operation in 3369 cycles (1024 bytes)
tcrypt: 1 operation in 11954 cycles (4096 bytes)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-01 17:12:51 +08:00
|
|
|
EXPORT_SYMBOL_GPL(aria_aesni_avx_encrypt_16way);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
asmlinkage void aria_aesni_avx_decrypt_16way(const void *ctx, u8 *dst,
|
|
|
|
const u8 *src);
|
crypto: x86/aria - implement aria-avx2
aria-avx2 implementation uses AVX2, AES-NI, and GFNI.
It supports 32way parallel processing.
So, byteslicing code is changed to support 32way parallel.
And it exports some aria-avx functions such as encrypt() and decrypt().
There are two main logics, s-box layer and diffusion layer.
These codes are the same as aria-avx implementation.
But some instruction are exchanged because they don't support 256bit
registers.
Also, AES-NI doesn't support 256bit register.
So, aesenclast and aesdeclast are used twice like below:
vextracti128 $1, ymm0, xmm6;
vaesenclast xmm7, xmm0, xmm0;
vaesenclast xmm7, xmm6, xmm6;
vinserti128 $1, xmm6, ymm0, ymm0;
Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100:
ARIA-AVX2 with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption
tcrypt: 1 operation in 2003 cycles (1024 bytes)
tcrypt: 1 operation in 5867 cycles (4096 bytes)
tcrypt: 1 operation in 2358 cycles (1024 bytes)
tcrypt: 1 operation in 7295 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption
tcrypt: 1 operation in 2004 cycles (1024 bytes)
tcrypt: 1 operation in 5956 cycles (4096 bytes)
tcrypt: 1 operation in 2409 cycles (1024 bytes)
tcrypt: 1 operation in 7564 cycles (4096 bytes)
ARIA-AVX with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption
tcrypt: 1 operation in 2761 cycles (1024 bytes)
tcrypt: 1 operation in 9390 cycles (4096 bytes)
tcrypt: 1 operation in 3401 cycles (1024 bytes)
tcrypt: 1 operation in 11876 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption
tcrypt: 1 operation in 2735 cycles (1024 bytes)
tcrypt: 1 operation in 9424 cycles (4096 bytes)
tcrypt: 1 operation in 3369 cycles (1024 bytes)
tcrypt: 1 operation in 11954 cycles (4096 bytes)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-01 17:12:51 +08:00
|
|
|
EXPORT_SYMBOL_GPL(aria_aesni_avx_decrypt_16way);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
asmlinkage void aria_aesni_avx_ctr_crypt_16way(const void *ctx, u8 *dst,
|
|
|
|
const u8 *src,
|
|
|
|
u8 *keystream, u8 *iv);
|
crypto: x86/aria - implement aria-avx2
aria-avx2 implementation uses AVX2, AES-NI, and GFNI.
It supports 32way parallel processing.
So, byteslicing code is changed to support 32way parallel.
And it exports some aria-avx functions such as encrypt() and decrypt().
There are two main logics, s-box layer and diffusion layer.
These codes are the same as aria-avx implementation.
But some instruction are exchanged because they don't support 256bit
registers.
Also, AES-NI doesn't support 256bit register.
So, aesenclast and aesdeclast are used twice like below:
vextracti128 $1, ymm0, xmm6;
vaesenclast xmm7, xmm0, xmm0;
vaesenclast xmm7, xmm6, xmm6;
vinserti128 $1, xmm6, ymm0, ymm0;
Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100:
ARIA-AVX2 with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption
tcrypt: 1 operation in 2003 cycles (1024 bytes)
tcrypt: 1 operation in 5867 cycles (4096 bytes)
tcrypt: 1 operation in 2358 cycles (1024 bytes)
tcrypt: 1 operation in 7295 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption
tcrypt: 1 operation in 2004 cycles (1024 bytes)
tcrypt: 1 operation in 5956 cycles (4096 bytes)
tcrypt: 1 operation in 2409 cycles (1024 bytes)
tcrypt: 1 operation in 7564 cycles (4096 bytes)
ARIA-AVX with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption
tcrypt: 1 operation in 2761 cycles (1024 bytes)
tcrypt: 1 operation in 9390 cycles (4096 bytes)
tcrypt: 1 operation in 3401 cycles (1024 bytes)
tcrypt: 1 operation in 11876 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption
tcrypt: 1 operation in 2735 cycles (1024 bytes)
tcrypt: 1 operation in 9424 cycles (4096 bytes)
tcrypt: 1 operation in 3369 cycles (1024 bytes)
tcrypt: 1 operation in 11954 cycles (4096 bytes)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-01 17:12:51 +08:00
|
|
|
EXPORT_SYMBOL_GPL(aria_aesni_avx_ctr_crypt_16way);
|
2023-01-15 20:15:34 +08:00
|
|
|
#ifdef CONFIG_AS_GFNI
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
asmlinkage void aria_aesni_avx_gfni_encrypt_16way(const void *ctx, u8 *dst,
|
|
|
|
const u8 *src);
|
crypto: x86/aria - implement aria-avx2
aria-avx2 implementation uses AVX2, AES-NI, and GFNI.
It supports 32way parallel processing.
So, byteslicing code is changed to support 32way parallel.
And it exports some aria-avx functions such as encrypt() and decrypt().
There are two main logics, s-box layer and diffusion layer.
These codes are the same as aria-avx implementation.
But some instruction are exchanged because they don't support 256bit
registers.
Also, AES-NI doesn't support 256bit register.
So, aesenclast and aesdeclast are used twice like below:
vextracti128 $1, ymm0, xmm6;
vaesenclast xmm7, xmm0, xmm0;
vaesenclast xmm7, xmm6, xmm6;
vinserti128 $1, xmm6, ymm0, ymm0;
Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100:
ARIA-AVX2 with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption
tcrypt: 1 operation in 2003 cycles (1024 bytes)
tcrypt: 1 operation in 5867 cycles (4096 bytes)
tcrypt: 1 operation in 2358 cycles (1024 bytes)
tcrypt: 1 operation in 7295 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption
tcrypt: 1 operation in 2004 cycles (1024 bytes)
tcrypt: 1 operation in 5956 cycles (4096 bytes)
tcrypt: 1 operation in 2409 cycles (1024 bytes)
tcrypt: 1 operation in 7564 cycles (4096 bytes)
ARIA-AVX with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption
tcrypt: 1 operation in 2761 cycles (1024 bytes)
tcrypt: 1 operation in 9390 cycles (4096 bytes)
tcrypt: 1 operation in 3401 cycles (1024 bytes)
tcrypt: 1 operation in 11876 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption
tcrypt: 1 operation in 2735 cycles (1024 bytes)
tcrypt: 1 operation in 9424 cycles (4096 bytes)
tcrypt: 1 operation in 3369 cycles (1024 bytes)
tcrypt: 1 operation in 11954 cycles (4096 bytes)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-01 17:12:51 +08:00
|
|
|
EXPORT_SYMBOL_GPL(aria_aesni_avx_gfni_encrypt_16way);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
asmlinkage void aria_aesni_avx_gfni_decrypt_16way(const void *ctx, u8 *dst,
|
|
|
|
const u8 *src);
|
crypto: x86/aria - implement aria-avx2
aria-avx2 implementation uses AVX2, AES-NI, and GFNI.
It supports 32way parallel processing.
So, byteslicing code is changed to support 32way parallel.
And it exports some aria-avx functions such as encrypt() and decrypt().
There are two main logics, s-box layer and diffusion layer.
These codes are the same as aria-avx implementation.
But some instruction are exchanged because they don't support 256bit
registers.
Also, AES-NI doesn't support 256bit register.
So, aesenclast and aesdeclast are used twice like below:
vextracti128 $1, ymm0, xmm6;
vaesenclast xmm7, xmm0, xmm0;
vaesenclast xmm7, xmm6, xmm6;
vinserti128 $1, xmm6, ymm0, ymm0;
Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100:
ARIA-AVX2 with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption
tcrypt: 1 operation in 2003 cycles (1024 bytes)
tcrypt: 1 operation in 5867 cycles (4096 bytes)
tcrypt: 1 operation in 2358 cycles (1024 bytes)
tcrypt: 1 operation in 7295 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption
tcrypt: 1 operation in 2004 cycles (1024 bytes)
tcrypt: 1 operation in 5956 cycles (4096 bytes)
tcrypt: 1 operation in 2409 cycles (1024 bytes)
tcrypt: 1 operation in 7564 cycles (4096 bytes)
ARIA-AVX with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption
tcrypt: 1 operation in 2761 cycles (1024 bytes)
tcrypt: 1 operation in 9390 cycles (4096 bytes)
tcrypt: 1 operation in 3401 cycles (1024 bytes)
tcrypt: 1 operation in 11876 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption
tcrypt: 1 operation in 2735 cycles (1024 bytes)
tcrypt: 1 operation in 9424 cycles (4096 bytes)
tcrypt: 1 operation in 3369 cycles (1024 bytes)
tcrypt: 1 operation in 11954 cycles (4096 bytes)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-01 17:12:51 +08:00
|
|
|
EXPORT_SYMBOL_GPL(aria_aesni_avx_gfni_decrypt_16way);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
asmlinkage void aria_aesni_avx_gfni_ctr_crypt_16way(const void *ctx, u8 *dst,
|
|
|
|
const u8 *src,
|
|
|
|
u8 *keystream, u8 *iv);
|
crypto: x86/aria - implement aria-avx2
aria-avx2 implementation uses AVX2, AES-NI, and GFNI.
It supports 32way parallel processing.
So, byteslicing code is changed to support 32way parallel.
And it exports some aria-avx functions such as encrypt() and decrypt().
There are two main logics, s-box layer and diffusion layer.
These codes are the same as aria-avx implementation.
But some instruction are exchanged because they don't support 256bit
registers.
Also, AES-NI doesn't support 256bit register.
So, aesenclast and aesdeclast are used twice like below:
vextracti128 $1, ymm0, xmm6;
vaesenclast xmm7, xmm0, xmm0;
vaesenclast xmm7, xmm6, xmm6;
vinserti128 $1, xmm6, ymm0, ymm0;
Benchmark with modprobe tcrypt mode=610 num_mb=8192, i3-12100:
ARIA-AVX2 with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) encryption
tcrypt: 1 operation in 2003 cycles (1024 bytes)
tcrypt: 1 operation in 5867 cycles (4096 bytes)
tcrypt: 1 operation in 2358 cycles (1024 bytes)
tcrypt: 1 operation in 7295 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx2) decryption
tcrypt: 1 operation in 2004 cycles (1024 bytes)
tcrypt: 1 operation in 5956 cycles (4096 bytes)
tcrypt: 1 operation in 2409 cycles (1024 bytes)
tcrypt: 1 operation in 7564 cycles (4096 bytes)
ARIA-AVX with GFNI(128bit and 256bit)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) encryption
tcrypt: 1 operation in 2761 cycles (1024 bytes)
tcrypt: 1 operation in 9390 cycles (4096 bytes)
tcrypt: 1 operation in 3401 cycles (1024 bytes)
tcrypt: 1 operation in 11876 cycles (4096 bytes)
testing speed of multibuffer ecb(aria) (ecb-aria-avx) decryption
tcrypt: 1 operation in 2735 cycles (1024 bytes)
tcrypt: 1 operation in 9424 cycles (4096 bytes)
tcrypt: 1 operation in 3369 cycles (1024 bytes)
tcrypt: 1 operation in 11954 cycles (4096 bytes)
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-01-01 17:12:51 +08:00
|
|
|
EXPORT_SYMBOL_GPL(aria_aesni_avx_gfni_ctr_crypt_16way);
|
2023-01-15 20:15:34 +08:00
|
|
|
#endif /* CONFIG_AS_GFNI */
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
|
|
|
|
static struct aria_avx_ops aria_ops;
|
|
|
|
|
2023-01-01 17:12:49 +08:00
|
|
|
struct aria_avx_request_ctx {
|
|
|
|
u8 keystream[ARIA_AESNI_PARALLEL_BLOCK_SIZE];
|
|
|
|
};
|
|
|
|
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
static int ecb_do_encrypt(struct skcipher_request *req, const u32 *rkey)
|
|
|
|
{
|
|
|
|
ECB_WALK_START(req, ARIA_BLOCK_SIZE, ARIA_AESNI_PARALLEL_BLOCKS);
|
|
|
|
ECB_BLOCK(ARIA_AESNI_PARALLEL_BLOCKS, aria_ops.aria_encrypt_16way);
|
|
|
|
ECB_BLOCK(1, aria_encrypt);
|
|
|
|
ECB_WALK_END();
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ecb_do_decrypt(struct skcipher_request *req, const u32 *rkey)
|
|
|
|
{
|
|
|
|
ECB_WALK_START(req, ARIA_BLOCK_SIZE, ARIA_AESNI_PARALLEL_BLOCKS);
|
|
|
|
ECB_BLOCK(ARIA_AESNI_PARALLEL_BLOCKS, aria_ops.aria_decrypt_16way);
|
|
|
|
ECB_BLOCK(1, aria_decrypt);
|
|
|
|
ECB_WALK_END();
|
|
|
|
}
|
|
|
|
|
|
|
|
static int aria_avx_ecb_encrypt(struct skcipher_request *req)
|
|
|
|
{
|
|
|
|
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
|
|
|
|
struct aria_ctx *ctx = crypto_skcipher_ctx(tfm);
|
|
|
|
|
|
|
|
return ecb_do_encrypt(req, ctx->enc_key[0]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int aria_avx_ecb_decrypt(struct skcipher_request *req)
|
|
|
|
{
|
|
|
|
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
|
|
|
|
struct aria_ctx *ctx = crypto_skcipher_ctx(tfm);
|
|
|
|
|
|
|
|
return ecb_do_decrypt(req, ctx->dec_key[0]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int aria_avx_set_key(struct crypto_skcipher *tfm, const u8 *key,
|
|
|
|
unsigned int keylen)
|
|
|
|
{
|
|
|
|
return aria_set_key(&tfm->base, key, keylen);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int aria_avx_ctr_encrypt(struct skcipher_request *req)
|
|
|
|
{
|
2023-01-01 17:12:49 +08:00
|
|
|
struct aria_avx_request_ctx *req_ctx = skcipher_request_ctx(req);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
|
|
|
|
struct aria_ctx *ctx = crypto_skcipher_ctx(tfm);
|
|
|
|
struct skcipher_walk walk;
|
|
|
|
unsigned int nbytes;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = skcipher_walk_virt(&walk, req, false);
|
|
|
|
|
|
|
|
while ((nbytes = walk.nbytes) > 0) {
|
|
|
|
const u8 *src = walk.src.virt.addr;
|
|
|
|
u8 *dst = walk.dst.virt.addr;
|
|
|
|
|
|
|
|
while (nbytes >= ARIA_AESNI_PARALLEL_BLOCK_SIZE) {
|
|
|
|
kernel_fpu_begin();
|
2023-01-01 17:12:49 +08:00
|
|
|
aria_ops.aria_ctr_crypt_16way(ctx, dst, src,
|
|
|
|
&req_ctx->keystream[0],
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
walk.iv);
|
|
|
|
kernel_fpu_end();
|
|
|
|
dst += ARIA_AESNI_PARALLEL_BLOCK_SIZE;
|
|
|
|
src += ARIA_AESNI_PARALLEL_BLOCK_SIZE;
|
|
|
|
nbytes -= ARIA_AESNI_PARALLEL_BLOCK_SIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (nbytes >= ARIA_BLOCK_SIZE) {
|
2023-01-01 17:12:49 +08:00
|
|
|
memcpy(&req_ctx->keystream[0], walk.iv, ARIA_BLOCK_SIZE);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
crypto_inc(walk.iv, ARIA_BLOCK_SIZE);
|
|
|
|
|
2023-01-01 17:12:49 +08:00
|
|
|
aria_encrypt(ctx, &req_ctx->keystream[0],
|
|
|
|
&req_ctx->keystream[0]);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
|
2023-01-01 17:12:49 +08:00
|
|
|
crypto_xor_cpy(dst, src, &req_ctx->keystream[0],
|
|
|
|
ARIA_BLOCK_SIZE);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
dst += ARIA_BLOCK_SIZE;
|
|
|
|
src += ARIA_BLOCK_SIZE;
|
|
|
|
nbytes -= ARIA_BLOCK_SIZE;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (walk.nbytes == walk.total && nbytes > 0) {
|
2023-01-01 17:12:49 +08:00
|
|
|
memcpy(&req_ctx->keystream[0], walk.iv,
|
|
|
|
ARIA_BLOCK_SIZE);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
crypto_inc(walk.iv, ARIA_BLOCK_SIZE);
|
|
|
|
|
2023-01-01 17:12:49 +08:00
|
|
|
aria_encrypt(ctx, &req_ctx->keystream[0],
|
|
|
|
&req_ctx->keystream[0]);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
|
2023-01-01 17:12:49 +08:00
|
|
|
crypto_xor_cpy(dst, src, &req_ctx->keystream[0],
|
|
|
|
nbytes);
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
dst += nbytes;
|
|
|
|
src += nbytes;
|
|
|
|
nbytes = 0;
|
|
|
|
}
|
|
|
|
err = skcipher_walk_done(&walk, nbytes);
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2023-01-01 17:12:49 +08:00
|
|
|
static int aria_avx_init_tfm(struct crypto_skcipher *tfm)
|
|
|
|
{
|
|
|
|
crypto_skcipher_set_reqsize(tfm, sizeof(struct aria_avx_request_ctx));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
static struct skcipher_alg aria_algs[] = {
|
|
|
|
{
|
|
|
|
.base.cra_name = "__ecb(aria)",
|
|
|
|
.base.cra_driver_name = "__ecb-aria-avx",
|
|
|
|
.base.cra_priority = 400,
|
|
|
|
.base.cra_flags = CRYPTO_ALG_INTERNAL,
|
|
|
|
.base.cra_blocksize = ARIA_BLOCK_SIZE,
|
|
|
|
.base.cra_ctxsize = sizeof(struct aria_ctx),
|
|
|
|
.base.cra_module = THIS_MODULE,
|
|
|
|
.min_keysize = ARIA_MIN_KEY_SIZE,
|
|
|
|
.max_keysize = ARIA_MAX_KEY_SIZE,
|
|
|
|
.setkey = aria_avx_set_key,
|
|
|
|
.encrypt = aria_avx_ecb_encrypt,
|
|
|
|
.decrypt = aria_avx_ecb_decrypt,
|
|
|
|
}, {
|
|
|
|
.base.cra_name = "__ctr(aria)",
|
|
|
|
.base.cra_driver_name = "__ctr-aria-avx",
|
|
|
|
.base.cra_priority = 400,
|
|
|
|
.base.cra_flags = CRYPTO_ALG_INTERNAL,
|
|
|
|
.base.cra_blocksize = 1,
|
|
|
|
.base.cra_ctxsize = sizeof(struct aria_ctx),
|
|
|
|
.base.cra_module = THIS_MODULE,
|
|
|
|
.min_keysize = ARIA_MIN_KEY_SIZE,
|
|
|
|
.max_keysize = ARIA_MAX_KEY_SIZE,
|
|
|
|
.ivsize = ARIA_BLOCK_SIZE,
|
|
|
|
.chunksize = ARIA_BLOCK_SIZE,
|
|
|
|
.walksize = 16 * ARIA_BLOCK_SIZE,
|
|
|
|
.setkey = aria_avx_set_key,
|
|
|
|
.encrypt = aria_avx_ctr_encrypt,
|
|
|
|
.decrypt = aria_avx_ctr_encrypt,
|
2023-01-01 17:12:49 +08:00
|
|
|
.init = aria_avx_init_tfm,
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct simd_skcipher_alg *aria_simd_algs[ARRAY_SIZE(aria_algs)];
|
|
|
|
|
|
|
|
static int __init aria_avx_init(void)
|
|
|
|
{
|
|
|
|
const char *feature_name;
|
|
|
|
|
|
|
|
if (!boot_cpu_has(X86_FEATURE_AVX) ||
|
|
|
|
!boot_cpu_has(X86_FEATURE_AES) ||
|
|
|
|
!boot_cpu_has(X86_FEATURE_OSXSAVE)) {
|
|
|
|
pr_info("AVX or AES-NI instructions are not detected.\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM,
|
|
|
|
&feature_name)) {
|
|
|
|
pr_info("CPU feature '%s' is not supported.\n", feature_name);
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
2023-01-15 20:15:34 +08:00
|
|
|
if (boot_cpu_has(X86_FEATURE_GFNI) && IS_ENABLED(CONFIG_AS_GFNI)) {
|
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
The implementation is based on the 32-bit implementation of the aria.
Also, aria-avx process steps are the similar to the camellia-avx.
1. Byteslice(16way)
2. Add-round-key.
3. Sbox
4. Diffusion layer.
Except for s-box, all steps are the same as the aria-generic
implementation. s-box step is very similar to camellia and
sm4 implementation.
There are 2 implementations for s-box step.
One is to use AES-NI and affine transformation, which is the same as
Camellia, sm4, and others.
Another is to use GFNI.
GFNI implementation is faster than AES-NI implementation.
So, it uses GFNI implementation if the running CPU supports GFNI.
There are 4 s-boxes in the ARIA and the 2 s-boxes are the same as
AES's s-boxes.
To calculate the first sbox, it just uses the aesenclast and then
inverts shift_row.
No more process is needed for this job because the first s-box is
the same as the AES encryption s-box.
To calculate the second sbox(invert of s1), it just uses the aesdeclast
and then inverts shift_row.
No more process is needed for this job because the second s-box is
the same as the AES decryption s-box.
To calculate the third s-box, it uses the aesenclast,
then affine transformation, which is combined AES inverse affine and
ARIA S2.
To calculate the last s-box, it uses the aesdeclast,
then affine transformation, which is combined X2 and AES forward affine.
The optimized third and last s-box logic and GFNI s-box logic are
implemented by Jussi Kivilinna.
The aria-generic implementation is based on a 32-bit implementation,
not an 8-bit implementation. the aria-avx Diffusion Layer implementation
is based on aria-generic implementation because 8-bit implementation is
not fit for parallel implementation but 32-bit is enough to fit for this.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16 20:57:35 +08:00
|
|
|
aria_ops.aria_encrypt_16way = aria_aesni_avx_gfni_encrypt_16way;
|
|
|
|
aria_ops.aria_decrypt_16way = aria_aesni_avx_gfni_decrypt_16way;
|
|
|
|
aria_ops.aria_ctr_crypt_16way = aria_aesni_avx_gfni_ctr_crypt_16way;
|
|
|
|
} else {
|
|
|
|
aria_ops.aria_encrypt_16way = aria_aesni_avx_encrypt_16way;
|
|
|
|
aria_ops.aria_decrypt_16way = aria_aesni_avx_decrypt_16way;
|
|
|
|
aria_ops.aria_ctr_crypt_16way = aria_aesni_avx_ctr_crypt_16way;
|
|
|
|
}
|
|
|
|
|
|
|
|
return simd_register_skciphers_compat(aria_algs,
|
|
|
|
ARRAY_SIZE(aria_algs),
|
|
|
|
aria_simd_algs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit aria_avx_exit(void)
|
|
|
|
{
|
|
|
|
simd_unregister_skciphers(aria_algs, ARRAY_SIZE(aria_algs),
|
|
|
|
aria_simd_algs);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(aria_avx_init);
|
|
|
|
module_exit(aria_avx_exit);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Taehee Yoo <ap420073@gmail.com>");
|
|
|
|
MODULE_DESCRIPTION("ARIA Cipher Algorithm, AVX/AES-NI/GFNI optimized");
|
|
|
|
MODULE_ALIAS_CRYPTO("aria");
|
|
|
|
MODULE_ALIAS_CRYPTO("aria-aesni-avx");
|