Btrfs: Add zlib compression support
This is a large change for adding compression on reading and writing,
both for inline and regular extents. It does some fairly large
surgery to the writeback paths.
Compression is off by default and enabled by mount -o compress. Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.
If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.
* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler. This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.
* Inline extents are inserted at delalloc time now. This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.
* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.
From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field. Neither the encryption or the
'other' field are currently used.
In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k. This is a
software only limit, the disk format supports u64 sized compressed extents.
In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k. This is a software only limit
and will be subject to tuning later.
Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data. This way additional encodings can be
layered on without having to figure out which encoding to checksum.
Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread. This makes it tricky to
spread the compression load across all the cpus on the box. We'll have to
look at parallel pdflush walks of dirty inodes at a later time.
Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-30 02:49:59 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2008 Oracle. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public
|
|
|
|
* License v2 as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public
|
|
|
|
* License along with this program; if not, write to the
|
|
|
|
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
|
|
|
* Boston, MA 021110-1307, USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __BTRFS_COMPRESSION_
|
|
|
|
#define __BTRFS_COMPRESSION_
|
|
|
|
|
2010-12-17 14:21:50 +08:00
|
|
|
int btrfs_init_compress(void);
|
|
|
|
void btrfs_exit_compress(void);
|
|
|
|
|
|
|
|
int btrfs_compress_pages(int type, struct address_space *mapping,
|
|
|
|
u64 start, unsigned long len,
|
|
|
|
struct page **pages,
|
|
|
|
unsigned long nr_dest_pages,
|
|
|
|
unsigned long *out_pages,
|
|
|
|
unsigned long *total_in,
|
|
|
|
unsigned long *total_out,
|
|
|
|
unsigned long max_out);
|
|
|
|
int btrfs_decompress_biovec(int type, struct page **pages_in, u64 disk_start,
|
|
|
|
struct bio_vec *bvec, int vcnt, size_t srclen);
|
|
|
|
int btrfs_decompress(int type, unsigned char *data_in, struct page *dest_page,
|
|
|
|
unsigned long start_byte, size_t srclen, size_t destlen);
|
|
|
|
|
Btrfs: Add zlib compression support
This is a large change for adding compression on reading and writing,
both for inline and regular extents. It does some fairly large
surgery to the writeback paths.
Compression is off by default and enabled by mount -o compress. Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.
If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.
* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler. This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.
* Inline extents are inserted at delalloc time now. This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.
* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.
From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field. Neither the encryption or the
'other' field are currently used.
In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k. This is a
software only limit, the disk format supports u64 sized compressed extents.
In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k. This is a software only limit
and will be subject to tuning later.
Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data. This way additional encodings can be
layered on without having to figure out which encoding to checksum.
Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread. This makes it tricky to
spread the compression load across all the cpus on the box. We'll have to
look at parallel pdflush walks of dirty inodes at a later time.
Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-30 02:49:59 +08:00
|
|
|
int btrfs_submit_compressed_write(struct inode *inode, u64 start,
|
|
|
|
unsigned long len, u64 disk_start,
|
|
|
|
unsigned long compressed_len,
|
|
|
|
struct page **compressed_pages,
|
|
|
|
unsigned long nr_pages);
|
|
|
|
int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
|
|
|
|
int mirror_num, unsigned long bio_flags);
|
2010-12-17 14:21:50 +08:00
|
|
|
|
|
|
|
struct btrfs_compress_op {
|
|
|
|
struct list_head *(*alloc_workspace)(void);
|
|
|
|
|
|
|
|
void (*free_workspace)(struct list_head *workspace);
|
|
|
|
|
|
|
|
int (*compress_pages)(struct list_head *workspace,
|
|
|
|
struct address_space *mapping,
|
|
|
|
u64 start, unsigned long len,
|
|
|
|
struct page **pages,
|
|
|
|
unsigned long nr_dest_pages,
|
|
|
|
unsigned long *out_pages,
|
|
|
|
unsigned long *total_in,
|
|
|
|
unsigned long *total_out,
|
|
|
|
unsigned long max_out);
|
|
|
|
|
|
|
|
int (*decompress_biovec)(struct list_head *workspace,
|
|
|
|
struct page **pages_in,
|
|
|
|
u64 disk_start,
|
|
|
|
struct bio_vec *bvec,
|
|
|
|
int vcnt,
|
|
|
|
size_t srclen);
|
|
|
|
|
|
|
|
int (*decompress)(struct list_head *workspace,
|
|
|
|
unsigned char *data_in,
|
|
|
|
struct page *dest_page,
|
|
|
|
unsigned long start_byte,
|
|
|
|
size_t srclen, size_t destlen);
|
|
|
|
};
|
|
|
|
|
|
|
|
extern struct btrfs_compress_op btrfs_zlib_compress;
|
2010-10-25 15:12:26 +08:00
|
|
|
extern struct btrfs_compress_op btrfs_lzo_compress;
|
2010-12-17 14:21:50 +08:00
|
|
|
|
Btrfs: Add zlib compression support
This is a large change for adding compression on reading and writing,
both for inline and regular extents. It does some fairly large
surgery to the writeback paths.
Compression is off by default and enabled by mount -o compress. Even
when the -o compress mount option is not used, it is possible to read
compressed extents off the disk.
If compression for a given set of pages fails to make them smaller, the
file is flagged to avoid future compression attempts later.
* While finding delalloc extents, the pages are locked before being sent down
to the delalloc handler. This allows the delalloc handler to do complex things
such as cleaning the pages, marking them writeback and starting IO on their
behalf.
* Inline extents are inserted at delalloc time now. This allows us to compress
the data before inserting the inline extent, and it allows us to insert
an inline extent that spans multiple pages.
* All of the in-memory extent representations (extent_map.c, ordered-data.c etc)
are changed to record both an in-memory size and an on disk size, as well
as a flag for compression.
From a disk format point of view, the extent pointers in the file are changed
to record the on disk size of a given extent and some encoding flags.
Space in the disk format is allocated for compression encoding, as well
as encryption and a generic 'other' field. Neither the encryption or the
'other' field are currently used.
In order to limit the amount of data read for a single random read in the
file, the size of a compressed extent is limited to 128k. This is a
software only limit, the disk format supports u64 sized compressed extents.
In order to limit the ram consumed while processing extents, the uncompressed
size of a compressed extent is limited to 256k. This is a software only limit
and will be subject to tuning later.
Checksumming is still done on compressed extents, and it is done on the
uncompressed version of the data. This way additional encodings can be
layered on without having to figure out which encoding to checksum.
Compression happens at delalloc time, which is basically singled threaded because
it is usually done by a single pdflush thread. This makes it tricky to
spread the compression load across all the cpus on the box. We'll have to
look at parallel pdflush walks of dirty inodes at a later time.
Decompression is hooked into readpages and it does spread across CPUs nicely.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-30 02:49:59 +08:00
|
|
|
#endif
|