korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-17 17:24:17 +08:00
Code Issues Packages Projects Releases Wiki Activity
173c520a04
linux/arch/powerpc/kvm/emulate_loadstore.c

699 lines
18 KiB
C
Raw Normal View History

KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* Copyright IBM Corp. 2007
* Copyright 2011 Freescale Semiconductor, Inc.
*
* Authors: Hollis Blanchard <hollisb@us.ibm.com>
*/
#include <linux/jiffies.h>
#include <linux/hrtimer.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kvm_host.h>
#include <linux/clockchips.h>
#include <asm/reg.h>
#include <asm/time.h>
#include <asm/byteorder.h>
#include <asm/kvm_ppc.h>
#include <asm/disassemble.h>
#include <asm/ppc-opcode.h>
#include "timing.h"
#include "trace.h"
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
#ifdef CONFIG_PPC_FPU
static bool kvmppc_check_fp_disabled(struct kvm_vcpu *vcpu)
{
if (!(kvmppc_get_msr(vcpu) & MSR_FP)) {
kvmppc_core_queue_fpunavail(vcpu);
return true;
}
return false;
}
#endif /* CONFIG_PPC_FPU */
#ifdef CONFIG_VSX
static bool kvmppc_check_vsx_disabled(struct kvm_vcpu *vcpu)
{
if (!(kvmppc_get_msr(vcpu) & MSR_VSX)) {
kvmppc_core_queue_vsx_unavail(vcpu);
return true;
}
return false;
}
#endif /* CONFIG_VSX */
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions This patch provides the MMIO load/store vector indexed X-Form emulation. Instructions implemented: lvx: the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0 is loaded into VRT. stvx: the contents of VRS are stored into the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0. Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-02-04 04:24:26 +08:00
#ifdef CONFIG_ALTIVEC
static bool kvmppc_check_altivec_disabled(struct kvm_vcpu *vcpu)
{
if (!(kvmppc_get_msr(vcpu) & MSR_VEC)) {
kvmppc_core_queue_vec_unavail(vcpu);
return true;
}
return false;
}
#endif /* CONFIG_ALTIVEC */
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
/*
* XXX to do:
* lfiwax, lfiwzx
* vector loads and stores
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
*
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
* Instructions that trap when used on cache-inhibited mappings
* are not emulated here: multiple and string instructions,
* lq/stq, and the load-reserve/store-conditional instructions.
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
*/
int kvmppc_emulate_loadstore(struct kvm_vcpu *vcpu)
{
struct kvm_run *run = vcpu->run;
u32 inst;
int ra, rs, rt;
enum emulation_result emulated;
int advance = 1;
/* this default type might be overwritten by subcategories */
kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS);
KVM: PPC: Pass enum to kvmppc_get_last_inst The kvmppc_get_last_inst function recently received a facelift that allowed us to pass an enum of the type of instruction we want to read into it rather than an unreadable boolean. Unfortunately, not all callers ended up passing the enum. This wasn't really an issue as "true" and "false" happen to match the two enum values we have, but it's still hard to read. Update all callers of kvmppc_get_last_inst() to follow the new calling convention. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-10 20:37:29 +08:00
emulated = kvmppc_get_last_inst(vcpu, INST_GENERIC, &inst);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
if (emulated != EMULATE_DONE)
return emulated;
ra = get_ra(inst);
rs = get_rs(inst);
rt = get_rt(inst);
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
/*
* if mmio_vsx_tx_sx_enabled == 0, copy data between
* VSR[0..31] and memory
* if mmio_vsx_tx_sx_enabled == 1, copy data between
* VSR[32..63] and memory
*/
vcpu->arch.mmio_vsx_tx_sx_enabled = get_tx_or_sx(inst);
vcpu->arch.mmio_vsx_copy_nums = 0;
vcpu->arch.mmio_vsx_offset = 0;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_NONE;
vcpu->arch.mmio_sp64_extend = 0;
vcpu->arch.mmio_sign_extend = 0;
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions This patch provides the MMIO load/store vector indexed X-Form emulation. Instructions implemented: lvx: the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0 is loaded into VRT. stvx: the contents of VRS are stored into the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0. Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-02-04 04:24:26 +08:00
vcpu->arch.mmio_vmx_copy_nums = 0;
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
switch (get_op(inst)) {
case 31:
switch (get_xop(inst)) {
case OP_31_XOP_LWZX:
emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
break;
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
case OP_31_XOP_LWZUX:
emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
case OP_31_XOP_LBZX:
emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
break;
case OP_31_XOP_LBZUX:
emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
KVM: PPC: Add MMIO emulation for stdx (store doubleword indexed) This adds missing stdx emulation for emulated MMIO accesses by KVM guests. This allows the Mellanox mlx5_core driver from recent kernels to work when MMIO emulation is enforced by userspace. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-17 16:31:38 +08:00
case OP_31_XOP_STDX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 8, 1);
break;
case OP_31_XOP_STDUX:
emulated = kvmppc_handle_store(run, vcpu,
kvmppc_get_gpr(vcpu, rs), 8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
KVM: PPC: Add MMIO emulation for stdx (store doubleword indexed) This adds missing stdx emulation for emulated MMIO accesses by KVM guests. This allows the Mellanox mlx5_core driver from recent kernels to work when MMIO emulation is enforced by userspace. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-17 16:31:38 +08:00
break;
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
case OP_31_XOP_STWX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 4, 1);
break;
case OP_31_XOP_STWUX:
emulated = kvmppc_handle_store(run, vcpu,
kvmppc_get_gpr(vcpu, rs), 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_31_XOP_STBX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 1, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_31_XOP_STBUX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 1, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_LHAX:
emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
break;
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
case OP_31_XOP_LHAUX:
emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
case OP_31_XOP_LHZX:
emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
break;
case OP_31_XOP_LHZUX:
emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_STHX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 2, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_31_XOP_STHUX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 2, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_DCBST:
case OP_31_XOP_DCBF:
case OP_31_XOP_DCBI:
/* Do nothing. The guest is performing dcbi because
* hardware DMA is not snooped by the dcache, but
* emulated DMA either goes through the dcache as
* normal writes, or the host kernel has handled dcache
* coherence. */
break;
case OP_31_XOP_LWBRX:
emulated = kvmppc_handle_load(run, vcpu, rt, 4, 0);
break;
case OP_31_XOP_STWBRX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 4, 0);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_31_XOP_LHBRX:
emulated = kvmppc_handle_load(run, vcpu, rt, 2, 0);
break;
case OP_31_XOP_STHBRX:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 2, 0);
break;
case OP_31_XOP_LDBRX:
emulated = kvmppc_handle_load(run, vcpu, rt, 8, 0);
break;
case OP_31_XOP_STDBRX:
emulated = kvmppc_handle_store(run, vcpu,
kvmppc_get_gpr(vcpu, rs), 8, 0);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
case OP_31_XOP_LDX:
emulated = kvmppc_handle_load(run, vcpu, rt, 8, 1);
break;
case OP_31_XOP_LDUX:
emulated = kvmppc_handle_load(run, vcpu, rt, 8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_LWAX:
emulated = kvmppc_handle_loads(run, vcpu, rt, 4, 1);
break;
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
case OP_31_XOP_LWAUX:
emulated = kvmppc_handle_loads(run, vcpu, rt, 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
#ifdef CONFIG_PPC_FPU
case OP_31_XOP_LFSX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 4, 1);
break;
case OP_31_XOP_LFSUX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_LFDX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 8, 1);
break;
case OP_31_XOP_LFDUX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
KVM: PPC: Add MMIO emulation for remaining floating-point instructions For completeness, this adds emulation of the lfiwax and lfiwzx instructions. With this, all floating-point load and store instructions as of Power ISA V2.07 are emulated. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-23 08:55:16 +08:00
case OP_31_XOP_LFIWAX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_loads(run, vcpu,
KVM_MMIO_REG_FPR|rt, 4, 1);
break;
case OP_31_XOP_LFIWZX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 4, 1);
break;
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
case OP_31_XOP_STFSX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_store(run, vcpu,
VCPU_FPR(vcpu, rs), 4, 1);
break;
case OP_31_XOP_STFSUX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_store(run, vcpu,
VCPU_FPR(vcpu, rs), 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_STFDX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
VCPU_FPR(vcpu, rs), 8, 1);
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
break;
case OP_31_XOP_STFDUX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
VCPU_FPR(vcpu, rs), 8, 1);
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_31_XOP_STFIWX:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
VCPU_FPR(vcpu, rs), 4, 1);
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
break;
#endif
#ifdef CONFIG_VSX
case OP_31_XOP_LXSDX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 8, 1, 0);
break;
case OP_31_XOP_LXSSPX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 4, 1, 0);
break;
case OP_31_XOP_LXSIWAX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 4, 1, 1);
break;
case OP_31_XOP_LXSIWZX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 4, 1, 0);
break;
case OP_31_XOP_LXVD2X:
/*
* In this case, the official load/store process is like this:
* Step1, exit from vm by page fault isr, then kvm save vsr.
* Please see guest_exit_cont->store_fp_state->SAVE_32VSRS
* as reference.
*
* Step2, copy data between memory and VCPU
* Notice: for LXVD2X/STXVD2X/LXVW4X/STXVW4X, we use
* 2copies*8bytes or 4copies*4bytes
* to simulate one copy of 16bytes.
* Also there is an endian issue here, we should notice the
* layout of memory.
* Please see MARCO of LXVD2X_ROT/STXVD2X_ROT as more reference.
* If host is little-endian, kvm will call XXSWAPD for
* LXVD2X_ROT/STXVD2X_ROT.
* So, if host is little-endian,
* the postion of memeory should be swapped.
*
* Step3, return to guest, kvm reset register.
* Please see kvmppc_hv_entry->load_fp_state->REST_32VSRS
* as reference.
*/
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 2;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 8, 1, 0);
break;
case OP_31_XOP_LXVW4X:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 4;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_WORD;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 4, 1, 0);
break;
case OP_31_XOP_LXVDSX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type =
KVMPPC_VSX_COPY_DWORD_LOAD_DUMP;
emulated = kvmppc_handle_vsx_load(run, vcpu,
KVM_MMIO_REG_VSX|rt, 8, 1, 0);
break;
case OP_31_XOP_STXSDX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
emulated = kvmppc_handle_vsx_store(run, vcpu,
rs, 8, 1);
break;
case OP_31_XOP_STXSSPX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_vsx_store(run, vcpu,
rs, 4, 1);
break;
case OP_31_XOP_STXSIWX:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_offset = 1;
vcpu->arch.mmio_vsx_copy_nums = 1;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_WORD;
emulated = kvmppc_handle_vsx_store(run, vcpu,
rs, 4, 1);
break;
case OP_31_XOP_STXVD2X:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 2;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_DWORD;
emulated = kvmppc_handle_vsx_store(run, vcpu,
rs, 8, 1);
break;
case OP_31_XOP_STXVW4X:
if (kvmppc_check_vsx_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_vsx_copy_nums = 4;
vcpu->arch.mmio_vsx_copy_type = KVMPPC_VSX_COPY_WORD;
emulated = kvmppc_handle_vsx_store(run, vcpu,
rs, 4, 1);
break;
#endif /* CONFIG_VSX */
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions This patch provides the MMIO load/store vector indexed X-Form emulation. Instructions implemented: lvx: the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0 is loaded into VRT. stvx: the contents of VRS are stored into the quadword in storage addressed by the result of EA & 0xffff_ffff_ffff_fff0. Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-02-04 04:24:26 +08:00
#ifdef CONFIG_ALTIVEC
case OP_31_XOP_LVX:
if (kvmppc_check_altivec_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.vaddr_accessed &= ~0xFULL;
vcpu->arch.paddr_accessed &= ~0xFULL;
vcpu->arch.mmio_vmx_copy_nums = 2;
emulated = kvmppc_handle_load128_by2x64(run, vcpu,
KVM_MMIO_REG_VMX|rt, 1);
break;
case OP_31_XOP_STVX:
if (kvmppc_check_altivec_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.vaddr_accessed &= ~0xFULL;
vcpu->arch.paddr_accessed &= ~0xFULL;
vcpu->arch.mmio_vmx_copy_nums = 2;
emulated = kvmppc_handle_store128_by2x64(run, vcpu,
rs, 1);
break;
#endif /* CONFIG_ALTIVEC */
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
default:
emulated = EMULATE_FAIL;
break;
}
break;
case OP_LWZ:
emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
break;
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
#ifdef CONFIG_PPC_FPU
case OP_STFS:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_store(run, vcpu,
VCPU_FPR(vcpu, rs),
4, 1);
break;
case OP_STFSU:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_store(run, vcpu,
VCPU_FPR(vcpu, rs),
4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_STFD:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_store(run, vcpu,
VCPU_FPR(vcpu, rs),
8, 1);
break;
case OP_STFDU:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_store(run, vcpu,
VCPU_FPR(vcpu, rs),
8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
#endif
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
case OP_LD:
rt = get_rt(inst);
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
switch (inst & 3) {
case 0: /* ld */
emulated = kvmppc_handle_load(run, vcpu, rt, 8, 1);
break;
case 1: /* ldu */
emulated = kvmppc_handle_load(run, vcpu, rt, 8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case 2: /* lwa */
emulated = kvmppc_handle_loads(run, vcpu, rt, 4, 1);
break;
default:
emulated = EMULATE_FAIL;
}
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_LWZU:
emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_LBZ:
emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
break;
case OP_LBZU:
emulated = kvmppc_handle_load(run, vcpu, rt, 1, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_STW:
emulated = kvmppc_handle_store(run, vcpu,
kvmppc_get_gpr(vcpu, rs),
4, 1);
break;
case OP_STD:
rs = get_rs(inst);
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
switch (inst & 3) {
case 0: /* std */
emulated = kvmppc_handle_store(run, vcpu,
kvmppc_get_gpr(vcpu, rs), 8, 1);
break;
case 1: /* stdu */
emulated = kvmppc_handle_store(run, vcpu,
kvmppc_get_gpr(vcpu, rs), 8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
default:
emulated = EMULATE_FAIL;
}
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_STWU:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 4, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_STB:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 1, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_STBU:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 1, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_LHZ:
emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
break;
case OP_LHZU:
emulated = kvmppc_handle_load(run, vcpu, rt, 2, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_LHA:
emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
break;
case OP_LHAU:
emulated = kvmppc_handle_loads(run, vcpu, rt, 2, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_STH:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 2, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
break;
case OP_STHU:
emulated = kvmppc_handle_store(run, vcpu,
KVM: PPC: Emulation for more integer loads and stores This adds emulation for the following integer loads and stores, thus enabling them to be used in a guest for accessing emulated MMIO locations. - lhaux - lwaux - lwzux - ldu - lwa - stdux - stwux - stdu - ldbrx - stdbrx Previously, most of these would cause an emulation failure exit to userspace, though ldu and lwa got treated incorrectly as ld, and stdu got treated incorrectly as std. This also tidies up some of the formatting and updates the comment listing instructions that still need to be implemented. With this, all integer loads and stores that are defined in the Power ISA v2.07 are emulated, except for those that are permitted to trap when used on cache-inhibited or write-through mappings (and which do in fact trap on POWER8), that is, lmw/stmw, lswi/stswi, lswx/stswx, lq/stq, and l[bhwdq]arx/st[bhwdq]cx. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-03-21 12:43:47 +08:00
kvmppc_get_gpr(vcpu, rs), 2, 1);
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
KVM: PPC: Book3S: Add MMIO emulation for FP and VSX instructions This patch provides the MMIO load/store emulation for instructions of 'double & vector unsigned char & vector signed char & vector unsigned short & vector signed short & vector unsigned int & vector signed int & vector double '. The instructions that this adds emulation for are: - ldx, ldux, lwax, - lfs, lfsx, lfsu, lfsux, lfd, lfdx, lfdu, lfdux, - stfs, stfsx, stfsu, stfsux, stfd, stfdx, stfdu, stfdux, stfiwx, - lxsdx, lxsspx, lxsiwax, lxsiwzx, lxvd2x, lxvw4x, lxvdsx, - stxsdx, stxsspx, stxsiwx, stxvd2x, stxvw4x [paulus@ozlabs.org - some cleanups, fixes and rework, make it compile for Book E, fix build when PR KVM is built in] Signed-off-by: Bin Lu <lblulb@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2017-02-21 21:12:36 +08:00
#ifdef CONFIG_PPC_FPU
case OP_LFS:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 4, 1);
break;
case OP_LFSU:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
vcpu->arch.mmio_sp64_extend = 1;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 4, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
case OP_LFD:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 8, 1);
break;
case OP_LFDU:
if (kvmppc_check_fp_disabled(vcpu))
return EMULATE_DONE;
emulated = kvmppc_handle_load(run, vcpu,
KVM_MMIO_REG_FPR|rt, 8, 1);
kvmppc_set_gpr(vcpu, ra, vcpu->arch.vaddr_accessed);
break;
#endif
KVM: PPC: Separate loadstore emulation from priv emulation Today the instruction emulator can get called via 2 separate code paths. It can either be called by MMIO emulation detection code or by privileged instruction traps. This is bad, as both code paths prepare the environment differently. For MMIO emulation we already know the virtual address we faulted on, so instructions there don't have to actually fetch that information. Split out the two separate use cases into separate files. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-18 20:53:49 +08:00
default:
emulated = EMULATE_FAIL;
break;
}
if (emulated == EMULATE_FAIL) {
advance = 0;
kvmppc_core_queue_program(vcpu, 0);
}
trace_kvm_ppc_instr(inst, kvmppc_get_pc(vcpu), emulated);
/* Advance past emulated instruction. */
if (advance)
kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) + 4);
return emulated;
}
Reference in New Issue Copy Permalink