2019-02-04 17:19:35 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2018-04-11 19:53:17 +08:00
|
|
|
/*
|
|
|
|
* This file is part of AD5686 DAC driver
|
|
|
|
*
|
|
|
|
* Copyright 2018 Analog Devices Inc.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __DRIVERS_IIO_DAC_AD5686_H__
|
|
|
|
#define __DRIVERS_IIO_DAC_AD5686_H__
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/cache.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
2018-12-06 21:38:30 +08:00
|
|
|
#define AD5310_CMD(x) ((x) << 12)
|
|
|
|
|
iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with
12-bit, 14-bit and 16-bit precision respectively. The devices have either
no built-in reference, or built-in 2.5V reference.
These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except
with a few notable differences:
* they use the SPI interface instead of I2C
* in the write control register, DB18 and DB17 are used for setting the
power mode, while DB16 is the REF bit. This is why a new regmap type
was defined and checked accordingly.
* the shift register is 24 bits wide, the first four bits are the command
bits followed by the data bits. As the data comprises of 20-bit, 18-bit
or 16-bit input code, this means that 4 LSB bits are don't care. This is
why the data needs to be shifted on the left with four bits. Therefore,
AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write()
function. On the other hand, similar devices such as AD5693R family,
have the 4 MSB command bits followed by 4 don't care bits.
Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-18 23:23:34 +08:00
|
|
|
#define AD5683_DATA(x) ((x) << 4)
|
2018-12-06 21:38:30 +08:00
|
|
|
|
2018-04-11 19:53:17 +08:00
|
|
|
#define AD5686_ADDR(x) ((x) << 16)
|
|
|
|
#define AD5686_CMD(x) ((x) << 20)
|
|
|
|
|
|
|
|
#define AD5686_ADDR_DAC(chan) (0x1 << (chan))
|
|
|
|
#define AD5686_ADDR_ALL_DAC 0xF
|
|
|
|
|
|
|
|
#define AD5686_CMD_NOOP 0x0
|
|
|
|
#define AD5686_CMD_WRITE_INPUT_N 0x1
|
|
|
|
#define AD5686_CMD_UPDATE_DAC_N 0x2
|
|
|
|
#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N 0x3
|
|
|
|
#define AD5686_CMD_POWERDOWN_DAC 0x4
|
|
|
|
#define AD5686_CMD_LDAC_MASK 0x5
|
|
|
|
#define AD5686_CMD_RESET 0x6
|
|
|
|
#define AD5686_CMD_INTERNAL_REFER_SETUP 0x7
|
|
|
|
#define AD5686_CMD_DAISY_CHAIN_ENABLE 0x8
|
|
|
|
#define AD5686_CMD_READBACK_ENABLE 0x9
|
|
|
|
|
|
|
|
#define AD5686_LDAC_PWRDN_NONE 0x0
|
|
|
|
#define AD5686_LDAC_PWRDN_1K 0x1
|
|
|
|
#define AD5686_LDAC_PWRDN_100K 0x2
|
|
|
|
#define AD5686_LDAC_PWRDN_3STATE 0x3
|
|
|
|
|
2018-05-18 23:22:50 +08:00
|
|
|
#define AD5686_CMD_CONTROL_REG 0x4
|
iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with
12-bit, 14-bit and 16-bit precision respectively. The devices have either
no built-in reference, or built-in 2.5V reference.
These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except
with a few notable differences:
* they use the SPI interface instead of I2C
* in the write control register, DB18 and DB17 are used for setting the
power mode, while DB16 is the REF bit. This is why a new regmap type
was defined and checked accordingly.
* the shift register is 24 bits wide, the first four bits are the command
bits followed by the data bits. As the data comprises of 20-bit, 18-bit
or 16-bit input code, this means that 4 LSB bits are don't care. This is
why the data needs to be shifted on the left with four bits. Therefore,
AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write()
function. On the other hand, similar devices such as AD5693R family,
have the 4 MSB command bits followed by 4 don't care bits.
Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-18 23:23:34 +08:00
|
|
|
#define AD5686_CMD_READBACK_ENABLE_V2 0x5
|
2018-12-06 21:38:30 +08:00
|
|
|
|
|
|
|
#define AD5310_REF_BIT_MSK BIT(8)
|
iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with
12-bit, 14-bit and 16-bit precision respectively. The devices have either
no built-in reference, or built-in 2.5V reference.
These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except
with a few notable differences:
* they use the SPI interface instead of I2C
* in the write control register, DB18 and DB17 are used for setting the
power mode, while DB16 is the REF bit. This is why a new regmap type
was defined and checked accordingly.
* the shift register is 24 bits wide, the first four bits are the command
bits followed by the data bits. As the data comprises of 20-bit, 18-bit
or 16-bit input code, this means that 4 LSB bits are don't care. This is
why the data needs to be shifted on the left with four bits. Therefore,
AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write()
function. On the other hand, similar devices such as AD5693R family,
have the 4 MSB command bits followed by 4 don't care bits.
Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-18 23:23:34 +08:00
|
|
|
#define AD5683_REF_BIT_MSK BIT(12)
|
2018-05-18 23:22:50 +08:00
|
|
|
#define AD5693_REF_BIT_MSK BIT(12)
|
|
|
|
|
2018-04-11 19:53:17 +08:00
|
|
|
/**
|
|
|
|
* ad5686_supported_device_ids:
|
|
|
|
*/
|
|
|
|
enum ad5686_supported_device_ids {
|
2018-12-06 21:38:30 +08:00
|
|
|
ID_AD5310R,
|
2018-06-04 22:22:07 +08:00
|
|
|
ID_AD5311R,
|
2020-09-25 03:52:12 +08:00
|
|
|
ID_AD5338R,
|
2018-04-11 19:53:39 +08:00
|
|
|
ID_AD5671R,
|
2018-04-11 19:53:17 +08:00
|
|
|
ID_AD5672R,
|
2021-02-17 15:41:02 +08:00
|
|
|
ID_AD5673R,
|
2019-01-09 17:14:16 +08:00
|
|
|
ID_AD5674R,
|
2018-04-11 19:53:39 +08:00
|
|
|
ID_AD5675R,
|
2018-04-11 19:53:17 +08:00
|
|
|
ID_AD5676,
|
|
|
|
ID_AD5676R,
|
2021-02-17 15:41:02 +08:00
|
|
|
ID_AD5677R,
|
2019-01-09 17:14:16 +08:00
|
|
|
ID_AD5679R,
|
iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with
12-bit, 14-bit and 16-bit precision respectively. The devices have either
no built-in reference, or built-in 2.5V reference.
These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except
with a few notable differences:
* they use the SPI interface instead of I2C
* in the write control register, DB18 and DB17 are used for setting the
power mode, while DB16 is the REF bit. This is why a new regmap type
was defined and checked accordingly.
* the shift register is 24 bits wide, the first four bits are the command
bits followed by the data bits. As the data comprises of 20-bit, 18-bit
or 16-bit input code, this means that 4 LSB bits are don't care. This is
why the data needs to be shifted on the left with four bits. Therefore,
AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write()
function. On the other hand, similar devices such as AD5693R family,
have the 4 MSB command bits followed by 4 don't care bits.
Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-18 23:23:34 +08:00
|
|
|
ID_AD5681R,
|
|
|
|
ID_AD5682R,
|
|
|
|
ID_AD5683,
|
|
|
|
ID_AD5683R,
|
2018-04-11 19:53:17 +08:00
|
|
|
ID_AD5684,
|
|
|
|
ID_AD5684R,
|
|
|
|
ID_AD5685R,
|
|
|
|
ID_AD5686,
|
|
|
|
ID_AD5686R,
|
2018-05-18 23:22:50 +08:00
|
|
|
ID_AD5691R,
|
|
|
|
ID_AD5692R,
|
|
|
|
ID_AD5693,
|
|
|
|
ID_AD5693R,
|
2018-04-11 19:53:39 +08:00
|
|
|
ID_AD5694,
|
|
|
|
ID_AD5694R,
|
|
|
|
ID_AD5695R,
|
|
|
|
ID_AD5696,
|
|
|
|
ID_AD5696R,
|
2018-04-11 19:53:17 +08:00
|
|
|
};
|
|
|
|
|
2018-05-18 23:22:50 +08:00
|
|
|
enum ad5686_regmap_type {
|
2018-12-06 21:38:30 +08:00
|
|
|
AD5310_REGMAP,
|
iio:dac:ad5686: Add AD5681R/AD5682R/AD5683/AD5683R support
The AD5681R/AD5682R/AD5683/AD5683R are a family of one channel DACs with
12-bit, 14-bit and 16-bit precision respectively. The devices have either
no built-in reference, or built-in 2.5V reference.
These devices are similar to AD5691R/AD5692R/AD5693/AD5693R except
with a few notable differences:
* they use the SPI interface instead of I2C
* in the write control register, DB18 and DB17 are used for setting the
power mode, while DB16 is the REF bit. This is why a new regmap type
was defined and checked accordingly.
* the shift register is 24 bits wide, the first four bits are the command
bits followed by the data bits. As the data comprises of 20-bit, 18-bit
or 16-bit input code, this means that 4 LSB bits are don't care. This is
why the data needs to be shifted on the left with four bits. Therefore,
AD5683_REGMAP is checked inside a switch case in the ad5686_spi_write()
function. On the other hand, similar devices such as AD5693R family,
have the 4 MSB command bits followed by 4 don't care bits.
Datasheet:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5683R_5682R_5681R_5683.pdf
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-18 23:23:34 +08:00
|
|
|
AD5683_REGMAP,
|
2018-05-18 23:22:50 +08:00
|
|
|
AD5686_REGMAP,
|
|
|
|
AD5693_REGMAP
|
|
|
|
};
|
|
|
|
|
2018-04-11 19:53:17 +08:00
|
|
|
struct ad5686_state;
|
|
|
|
|
|
|
|
typedef int (*ad5686_write_func)(struct ad5686_state *st,
|
|
|
|
u8 cmd, u8 addr, u16 val);
|
|
|
|
|
|
|
|
typedef int (*ad5686_read_func)(struct ad5686_state *st, u8 addr);
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct ad5686_chip_info - chip specific information
|
|
|
|
* @int_vref_mv: AD5620/40/60: the internal reference voltage
|
|
|
|
* @num_channels: number of channels
|
|
|
|
* @channel: channel specification
|
2018-05-18 23:22:50 +08:00
|
|
|
* @regmap_type: register map layout variant
|
2018-04-11 19:53:17 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
struct ad5686_chip_info {
|
|
|
|
u16 int_vref_mv;
|
|
|
|
unsigned int num_channels;
|
2020-05-27 05:02:21 +08:00
|
|
|
const struct iio_chan_spec *channels;
|
2018-05-18 23:22:50 +08:00
|
|
|
enum ad5686_regmap_type regmap_type;
|
2018-04-11 19:53:17 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct ad5446_state - driver instance specific data
|
|
|
|
* @spi: spi_device
|
|
|
|
* @chip_info: chip model specific constants, available modes etc
|
|
|
|
* @reg: supply regulator
|
|
|
|
* @vref_mv: actual reference voltage used
|
|
|
|
* @pwr_down_mask: power down mask
|
|
|
|
* @pwr_down_mode: current power down mode
|
2018-05-18 23:22:50 +08:00
|
|
|
* @use_internal_vref: set to true if the internal reference voltage is used
|
2020-05-14 17:19:38 +08:00
|
|
|
* @lock lock to protect the data buffer during regmap ops
|
2018-04-11 19:53:17 +08:00
|
|
|
* @data: spi transfer buffers
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct ad5686_state {
|
|
|
|
struct device *dev;
|
|
|
|
const struct ad5686_chip_info *chip_info;
|
|
|
|
struct regulator *reg;
|
|
|
|
unsigned short vref_mv;
|
|
|
|
unsigned int pwr_down_mask;
|
|
|
|
unsigned int pwr_down_mode;
|
|
|
|
ad5686_write_func write;
|
|
|
|
ad5686_read_func read;
|
2018-05-18 23:22:50 +08:00
|
|
|
bool use_internal_vref;
|
2020-05-14 17:19:38 +08:00
|
|
|
struct mutex lock;
|
2018-04-11 19:53:17 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
|
|
* transfer buffers to live in their own cache lines.
|
|
|
|
*/
|
|
|
|
|
|
|
|
union {
|
|
|
|
__be32 d32;
|
|
|
|
__be16 d16;
|
|
|
|
u8 d8[4];
|
|
|
|
} data[3] ____cacheline_aligned;
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
int ad5686_probe(struct device *dev,
|
|
|
|
enum ad5686_supported_device_ids chip_type,
|
|
|
|
const char *name, ad5686_write_func write,
|
|
|
|
ad5686_read_func read);
|
|
|
|
|
|
|
|
int ad5686_remove(struct device *dev);
|
|
|
|
|
|
|
|
|
|
|
|
#endif /* __DRIVERS_IIO_DAC_AD5686_H__ */
|