korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-26 05:34:13 +08:00
Code Issues Packages Projects Releases Wiki Activity
160cc3ece7
linux/arch/powerpc/boot/Makefile

192 lines
6.1 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# Makefile for making ELF bootable images for booting on CHRP
# using Open Firmware.
#
# Geert Uytterhoeven September 1997
#
# Based on coffboot by Paul Mackerras
# Simplified for ppc64 by Todd Inglett
#
# NOTE: this code is built for 32 bit in ELF32 format even though
# it packages a 64 bit kernel. We do this to simplify the
# bootloader and increase compatibility with OpenFirmware.
#
# To this end we need to define BOOTCC, etc, as the tools
# needed to build the 32 bit image. These are normally HOSTCC,
# but may be a third compiler if, for example, you are cross
# compiling from an intel box. Once the 64bit ppc gcc is
# stable it will probably simply be a compiler switch to
# compile for 32bit mode.
# To make it easier to setup a cross compiler,
# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
# in the toplevel makefile.
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
all: $(obj)/zImage
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
HOSTCC := gcc
powerpc: Move ppc64 boot wrapper code over to arch/powerpc This also extends the code to handle 32-bit ELF vmlinux files as well as 64-bit ones. This is sufficient for booting on new-world 32-bit powermacs (i.e. all recent machines). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 10:38:21 +08:00
BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
$(shell $(CROSS32CC) -print-file-name=include) -fPIC
[PATCH] ppc64: make arch/ppc64/boot standalone Make the bootheader for ppc64 independent from kernel and libc headers. * add -nostdinc -isystem $gccincludes to not include libc headers * declare all functions in header files, also the stuff from string.S * declare some functions static * use stddef.h to get size_t (hopefully ok) * remove ppc32-types.h, only elf.h used the __NN types With further modifications by Paul Mackerras and Stephen Rothwell. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-08 11:24:38 +08:00
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
ifeq ($(call cc-option-yn, -fstack-protector),y)
BOOTCFLAGS += -fno-stack-protector
endif
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] zlib_inflate: Upgrade library code to a recent version Upgrade the zlib_inflate implementation in the kernel from a patched version 1.1.3/4 to a patched 1.2.3. The code in the kernel is about seven years old and I noticed that the external zlib library's inflate performance was significantly faster (~50%) than the code in the kernel on ARM (and faster again on x86_32). For comparison the newer deflate code is 20% slower on ARM and 50% slower on x86_32 but gives an approx 1% compression ratio improvement. I don't consider this to be an improvement for kernel use so have no plans to change the zlib_deflate code. Various changes have been made to the zlib code in the kernel, the most significant being the extra functions/flush option used by ppp_deflate. This update reimplements the features PPP needs to ensure it continues to work. This code has been tested on ARM under both JFFS2 (with zlib compression enabled) and ppp_deflate and on x86_32. JFFS2 sees an approx. 10% real world file read speed improvement. This patch also removes ZLIB_VERSION as it no longer has a correct value. We don't need version checks anyway as the kernel's module handling will take care of that for us. This removal is also more in keeping with the zlib author's wishes (http://www.zlib.net/zlib_faq.html#faq24) and I've added something to the zlib.h header to note its a modified version. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Joern Engel <joern@wh.fh-wedel.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 05:47:34 +08:00
zlib := inffast.c inflate.c inftrees.c
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
[PATCH] ppc64 boot: remove zlib Switch ppc64 to the in-kernel zlib, it has less bugs than the current one. The code in arch/ppc64/boot is compiled as 32bit, so it can not use the includes from include/asm. Copy all zlib related header files and convert them with sed. Reduce the scratch size to 47k, check possible changes at runtime. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 08:46:38 +08:00
zliblinuxheader := zlib.h zconf.h zutil.h
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \
$(addprefix $(obj)/,$(zlibheader))
[POWERPC] zImage: Cleanup and improve zImage entry point This patch re-organises the way the zImage wrapper code is entered, to allow more flexibility on platforms with unusual entry conditions. After this patch, a platform .o file has two options: 1) It can define a _zimage_start, in which case the platform code gets control from the very beginning of execution. In this case the platform code is responsible for relocating the zImage if necessary, clearing the BSS, performing any platform specific initialization, and finally calling start() to load and enter the kernel. 2) It can define platform_init(). In this case the generic crt0.S handles initial entry, and calls platform_init() before calling start(). The signature of platform_init() is changed, however, to take up to 5 parameters (in r3..r7) as they come from the platform's initial loader, instead of a fixed set of parameters based on OF's usage. When using the generic crt0.S, the platform .o can optionally supply a custom stack to use, using the BSS_STACK() macro. If this is not supplied, the crt0.S will assume that the loader has supplied a usable stack. In either case, the platform code communicates information to the generic code (specifically, a PROM pointer for OF systems, and/or an initrd image address supplied by the bootloader) via a global structure "loader_info". In addition the wrapper script is rearranged to ensure that the platform .o is always linked first. This means that platforms where the zImage entry point is at a fixed address or offset, rather than being encoded in the binary header can be supported using option (1). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-05 11:24:52 +08:00
src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \
[POWERPC] zImage: Add more flexible gunzip convenience functions At present, arch/powerpc/boot/main.c includes a gunzip() function which is a convenient wrapper around zlib. However, it doesn't conveniently allow decompressing part of an image to one location, then the remainder to a different address. This patch adds a new set of more flexible convenience wrappers around zlib, moving them to their own file, gunzip_util.c, in the process. These wrappers allow decompressing sections of the compressed image to different locations. In addition, they transparently handle uncompressed data, avoiding special case code to handle uncompressed vmlinux images. The patch also converts main.c to use the new wrappers, using the new flexibility to avoid decompressing the vmlinux's ELF header twice as we did previously. That in turn means we avoid extending our allocations for the vmlinux to allow space for the extra copy of the ELF header. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-05 11:24:52 +08:00
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c $(zlib)
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
src-plat := of.c
[POWERPC] zImage: Cleanup and improve zImage entry point This patch re-organises the way the zImage wrapper code is entered, to allow more flexibility on platforms with unusual entry conditions. After this patch, a platform .o file has two options: 1) It can define a _zimage_start, in which case the platform code gets control from the very beginning of execution. In this case the platform code is responsible for relocating the zImage if necessary, clearing the BSS, performing any platform specific initialization, and finally calling start() to load and enter the kernel. 2) It can define platform_init(). In this case the generic crt0.S handles initial entry, and calls platform_init() before calling start(). The signature of platform_init() is changed, however, to take up to 5 parameters (in r3..r7) as they come from the platform's initial loader, instead of a fixed set of parameters based on OF's usage. When using the generic crt0.S, the platform .o can optionally supply a custom stack to use, using the BSS_STACK() macro. If this is not supplied, the crt0.S will assume that the loader has supplied a usable stack. In either case, the platform code communicates information to the generic code (specifically, a PROM pointer for OF systems, and/or an initrd image address supplied by the bootloader) via a global structure "loader_info". In addition the wrapper script is rearranged to ensure that the platform .o is always linked first. This means that platforms where the zImage entry point is at a fixed address or offset, rather than being encoded in the binary header can be supported using option (1). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-05 11:24:52 +08:00
src-boot := $(src-wlib) $(src-plat) empty.c
[PATCH] ppc64 boot: remove zlib Switch ppc64 to the in-kernel zlib, it has less bugs than the current one. The code in arch/ppc64/boot is compiled as 32bit, so it can not use the includes from include/asm. Copy all zlib related header files and convert them with sed. Reduce the scratch size to 47k, check possible changes at runtime. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 08:46:38 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
src-boot := $(addprefix $(obj)/, $(src-boot))
obj-boot := $(addsuffix .o, $(basename $(src-boot)))
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
[PATCH] ppc64 boot: remove zlib Switch ppc64 to the in-kernel zlib, it has less bugs than the current one. The code in arch/ppc64/boot is compiled as 32bit, so it can not use the includes from include/asm. Copy all zlib related header files and convert them with sed. Reduce the scratch size to 47k, check possible changes at runtime. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 08:46:38 +08:00
quiet_cmd_copy_zlib = COPY $@
cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
quiet_cmd_copy_zlibheader = COPY $@
cmd_copy_zlibheader = sed "s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
# stddef.h for NULL
quiet_cmd_copy_zliblinuxheader = COPY $@
cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@
$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
$(call cmd,copy_zlib)
$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
$(call cmd,copy_zlibheader)
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/empty.c:
@touch $@
$(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S
@cp $< $@
[PATCH] ppc64 boot: remove zlib Switch ppc64 to the in-kernel zlib, it has less bugs than the current one. The code in arch/ppc64/boot is compiled as 32bit, so it can not use the includes from include/asm. Copy all zlib related header files and convert them with sed. Reduce the scratch size to 47k, check possible changes at runtime. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 08:46:38 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
[PATCH] Remove arch/powerpc/boot/zImage file. The bootwrapper Makefile does not clean up the 'zImage' file that may be left laying around. This patch removes it when cleaning that directory. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-09 08:52:25 +08:00
empty.c zImage zImage.coff.lds zImage.lds zImage.sandpoint
[PATCH] ppc64 boot: remove zlib Switch ppc64 to the in-kernel zlib, it has less bugs than the current one. The code in arch/ppc64/boot is compiled as 32bit, so it can not use the includes from include/asm. Copy all zlib related header files and convert them with sed. Reduce the scratch size to 47k, check possible changes at runtime. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 08:46:38 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
quiet_cmd_bootcc = BOOTCC $@
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
quiet_cmd_bootas = BOOTAS $@
cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@
[PATCH] ppc64: zimage build fix Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-16 04:59:13 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c
$(call if_changed_dep,bootcc)
$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S
$(call if_changed_dep,bootas)
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/wrapper.a: $(obj-wlib)
$(call cmd,bootar)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Add mktree utility to arch/powerpc/boot This patch adds the mktree program that is needed to post process zImage wrappers for various PowerPC 4xx boards Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-13 23:07:01 +08:00
hostprogs-y := addnote addRamDisk hack-coff mktree
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] zImage: Cleanup and improve zImage entry point This patch re-organises the way the zImage wrapper code is entered, to allow more flexibility on platforms with unusual entry conditions. After this patch, a platform .o file has two options: 1) It can define a _zimage_start, in which case the platform code gets control from the very beginning of execution. In this case the platform code is responsible for relocating the zImage if necessary, clearing the BSS, performing any platform specific initialization, and finally calling start() to load and enter the kernel. 2) It can define platform_init(). In this case the generic crt0.S handles initial entry, and calls platform_init() before calling start(). The signature of platform_init() is changed, however, to take up to 5 parameters (in r3..r7) as they come from the platform's initial loader, instead of a fixed set of parameters based on OF's usage. When using the generic crt0.S, the platform .o can optionally supply a custom stack to use, using the BSS_STACK() macro. If this is not supplied, the crt0.S will assume that the loader has supplied a usable stack. In either case, the platform code communicates information to the generic code (specifically, a PROM pointer for OF systems, and/or an initrd image address supplied by the bootloader) via a global structure "loader_info". In addition the wrapper script is rearranged to ensure that the platform .o is always linked first. This means that platforms where the zImage entry point is at a fixed address or offset, rather than being encoded in the binary header can be supported using option (1). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-05 11:24:52 +08:00
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.lds $(obj)/zImage.coff.lds
powerpc: Make COFF zImages for old 32-bit powermacs This adds code to build zImage.coff and/or zImage.initrd.coff when CONFIG_PPC32 and CONFIG_PPC_PMAC are defined. It also restructures the OF client code and adds some workarounds for OF quirks on the older machines. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 12:04:06 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
wrapper :=$(srctree)/$(src)/wrapper
[POWERPC] boot: rebuild when wrapper changes Since there is magic defined per platform in the wrapper script, the zImage targets should depend on it. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-20 04:58:04 +08:00
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
#############
# Bits for building various flavours of zImage
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
ifneq ($(CROSS32_COMPILE),)
[POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spaces My CROSS_COMPILE is "ccache /opt/compilers/blah", which confuses the boot wrapper script. Quote CROSS_COMPILE and CROSS32_COMPILE so they can safely contain spaces. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-30 09:54:09 +08:00
CROSSWRAP := -C "$(CROSS32_COMPILE)"
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
else
ifneq ($(CROSS_COMPILE),)
[POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spaces My CROSS_COMPILE is "ccache /opt/compilers/blah", which confuses the boot wrapper script. Quote CROSS_COMPILE and CROSS32_COMPILE so they can safely contain spaces. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-30 09:54:09 +08:00
CROSSWRAP := -C "$(CROSS_COMPILE)"
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
endif
endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
quiet_cmd_wrap = WRAP $@
[PATCH] git-powerpc: wrapper: don't require execute permissions If you lose the x bit (eg: by using patch(1)), powerpc won't build. Be defensive about it... Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 17:17:32 +08:00
cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
quiet_cmd_wrap_initrd = WRAP $@
[POWERPC] Don't require execute perms on wrapper when building zImage.initrd Don't require that the wrapper script be executable when building zImage.initrds. This has already been fixed for zImages. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-19 05:38:09 +08:00
cmd_wrap_initrd =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
-i $(obj)/ramdisk.image.gz vmlinux
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.chrp: vmlinux $(wrapperbits)
$(call cmd,wrap,chrp)
[PATCH] ppc64: makefile cleanup This patch cleans up the output generated by ppc64 builds. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-11 08:57:42 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,chrp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.pseries: vmlinux $(wrapperbits)
$(call cmd,wrap,pseries)
powerpc/32: Generate miboot images with ARCH=powerpc Miboot images are apparently still used on some old 32-bit powermacs, so build them with ARCH=powerpc if we're 32-bit and powermac support is enabled. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 10:00:08 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,pseries)
powerpc: Make COFF zImages for old 32-bit powermacs This adds code to build zImage.coff and/or zImage.initrd.coff when CONFIG_PPC32 and CONFIG_PPC_PMAC are defined. It also restructures the OF client code and adds some workarounds for OF quirks on the older machines. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 12:04:06 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.pmac: vmlinux $(wrapperbits)
$(call cmd,wrap,pmac)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,pmac)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.coff: vmlinux $(wrapperbits)
$(call cmd,wrap,pmaccoff)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,pmaccoff)
$(obj)/zImage.miboot: vmlinux $(wrapperbits)
$(call cmd,wrap,miboot)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
$(call cmd,wrap_initrd,miboot)
[PATCH] ppc64: zimage build fix Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-16 04:59:13 +08:00
[POWERPC] ps3: add a default zImage target Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 08:11:38 +08:00
$(obj)/zImage.ps3: vmlinux
$(STRIP) -s -R .comment $< -o $@
[POWERPC] Fix build of cell zImage.initrd The patch adding support for zImage.ps3 didn't add a zImage.initrd.ps3 target causing builds of zImage.initrd to fail when ps3 is included in the .config. The current method of generating ps3 images doesn't support initrd's yet, so we create a dummy target that only displays a warning message instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-19 13:42:58 +08:00
$(obj)/zImage.initrd.ps3: vmlinux
@echo " WARNING zImage.initrd.ps3 not supported (yet)"
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
$(obj)/uImage: vmlinux $(wrapperbits)
$(call cmd,wrap,uboot)
[POWERPC] cell: fix default zImage build target Change CONFIG_PPC_CELL to CONFIG_PPC_IBM_CELL_BLADE in the powerpc boot makefile. CONFIG_PPC_CELL is used to build the generic cell processor support, and is not an indication of platform. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-08 06:33:53 +08:00
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
[POWERPC] ps3: add a default zImage target Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and set this as the default image to build for that platform. Until the compressed zImage wrapper is made, this arranges for a stripped vmlinux image to be built. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 08:11:38 +08:00
image-$(CONFIG_PPC_PS3) += zImage.ps3
[POWERPC] Celleb: basic support This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-02 15:47:17 +08:00
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
[POWERPC] cell: fix default zImage build target Change CONFIG_PPC_CELL to CONFIG_PPC_IBM_CELL_BLADE in the powerpc boot makefile. CONFIG_PPC_CELL is used to build the generic cell processor support, and is not an indication of platform. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-08 06:33:53 +08:00
image-$(CONFIG_PPC_CHRP) += zImage.chrp
[POWERPC] Compile a zImage.chrp if PPC_EFIKA seleted Signed-off-by: Nicolas DET <nd@bplan-gmbh.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-18 00:08:37 +08:00
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
[POWERPC] cell: fix default zImage build target Change CONFIG_PPC_CELL to CONFIG_PPC_IBM_CELL_BLADE in the powerpc boot makefile. CONFIG_PPC_CELL is used to build the generic cell processor support, and is not an indication of platform. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-08 06:33:53 +08:00
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
powerpc: Make COFF zImages for old 32-bit powermacs This adds code to build zImage.coff and/or zImage.initrd.coff when CONFIG_PPC32 and CONFIG_PPC_PMAC are defined. It also restructures the OF client code and adds some workarounds for OF quirks on the older machines. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 12:04:06 +08:00
powerpc/32: Generate miboot images with ARCH=powerpc Miboot images are apparently still used on some old 32-bit powermacs, so build them with ARCH=powerpc if we're 32-bit and powermac support is enabled. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 10:00:08 +08:00
# For 32-bit powermacs, build the COFF and miboot images
# as well as the ELF images.
[POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot This puts the knowledge of how to create various sorts of zImage wrappers into a script called "wrapper" that could be used outside of the kernel tree. This changes arch/powerpc/boot so it first builds the files that the wrapper script needs, then runs it to create whatever flavours of zImage are required. This version does uImages as well. The zImage names are changed slightly; zImage.pseries is the one with the PT_NOTE program header entry added, and zImage.pmac is the one without. If the zImage.pseries gets made, it will also get hardlinked to zImage; otherwise, if zImage.pmac is made, it gets hardlinked to zImage. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-27 20:47:03 +08:00
ifeq ($(CONFIG_PPC32),y)
image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot
endif
initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y))
$(obj)/zImage: $(addprefix $(obj)/, $(image-y))
@rm -f $@; ln $< $@
$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
@rm -f $@; ln $< $@
install: $(CONFIGURE) $(image-y)
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz)
clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz)
[POWERPC] Clean images in arch/powerpc/boot Add a rule to clean up the various generated image files in arch/powerpc/boot. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-28 19:31:53 +08:00
clean-files += $(image-)
Reference in New Issue Copy Permalink