linux/fs/btrfs/transaction.h

249 lines
7.9 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2007 Oracle. All rights reserved.
*/
#ifndef BTRFS_TRANSACTION_H
#define BTRFS_TRANSACTION_H
#include <linux/refcount.h>
#include "btrfs_inode.h"
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
#include "delayed-ref.h"
#include "ctree.h"
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
enum btrfs_trans_state {
TRANS_STATE_RUNNING,
TRANS_STATE_COMMIT_START,
TRANS_STATE_COMMIT_DOING,
TRANS_STATE_UNBLOCKED,
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
TRANS_STATE_SUPER_COMMITTED,
TRANS_STATE_COMPLETED,
TRANS_STATE_MAX,
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
};
#define BTRFS_TRANS_HAVE_FREE_BGS 0
#define BTRFS_TRANS_DIRTY_BG_RUN 1
#define BTRFS_TRANS_CACHE_ENOSPC 2
struct btrfs_transaction {
u64 transid;
/*
* total external writers(USERSPACE/START/ATTACH) in this
* transaction, it must be zero before the transaction is
* being committed
*/
atomic_t num_extwriters;
/*
* total writers in this transaction, it must be zero before the
* transaction can end
*/
atomic_t num_writers;
refcount_t use_count;
unsigned long flags;
btrfs: Fix out-of-space bug Btrfs will report NO_SPACE when we create and remove files for several times, and we can't write to filesystem until mount it again. Steps to reproduce: 1: Create a single-dev btrfs fs with default option 2: Write a file into it to take up most fs space 3: Delete above file 4: Wait about 100s to let chunk removed 5: goto 2 Script is like following: #!/bin/bash # Recommend 1.2G space, too large disk will make test slow DEV="/dev/sda16" MNT="/mnt/tmp" dev_size="$(lsblk -bn -o SIZE "$DEV")" || exit 2 file_size_m=$((dev_size * 75 / 100 / 1024 / 1024)) echo "Loop write ${file_size_m}M file on $((dev_size / 1024 / 1024))M dev" for ((i = 0; i < 10; i++)); do umount "$MNT" 2>/dev/null; done echo "mkfs $DEV" mkfs.btrfs -f "$DEV" >/dev/null || exit 2 echo "mount $DEV $MNT" mount "$DEV" "$MNT" || exit 2 for ((loop_i = 0; loop_i < 20; loop_i++)); do echo echo "loop $loop_i" echo "dd file..." cmd=(dd if=/dev/zero of="$MNT"/file0 bs=1M count="$file_size_m") "${cmd[@]}" 2>/dev/null || { # NO_SPACE error triggered echo "dd failed: ${cmd[*]}" exit 1 } echo "rm file..." rm -f "$MNT"/file0 || exit 2 for ((i = 0; i < 10; i++)); do df "$MNT" | tail -1 sleep 10 done done Reason: It is triggered by commit: 47ab2a6c689913db23ccae38349714edf8365e0a which is used to remove empty block groups automatically, but the reason is not in that patch. Code before works well because btrfs don't need to create and delete chunks so many times with high complexity. Above bug is caused by many reason, any of them can trigger it. Reason1: When we remove some continuous chunks but leave other chunks after, these disk space should be used by chunk-recreating, but in current code, only first create will successed. Fixed by Forrest Liu <forrestl@synology.com> in: Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Reason2: contains_pending_extent() return wrong value in calculation. Fixed by Forrest Liu <forrestl@synology.com> in: Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole Reason3: btrfs_check_data_free_space() try to commit transaction and retry allocating chunk when the first allocating failed, but space_info->full is set in first allocating, and prevent second allocating in retry. Fixed in this patch by clear space_info->full in commit transaction. Tested for severial times by above script. Changelog v3->v4: use light weight int instead of atomic_t to record have_remove_bgs in transaction, suggested by: Josef Bacik <jbacik@fb.com> Changelog v2->v3: v2 fixed the bug by adding more commit-transaction, but we only need to reclaim space when we are really have no space for new chunk, noticed by: Filipe David Manana <fdmanana@gmail.com> Actually, our code already have this type of commit-and-retry, we only need to make it working with removed-bgs. v3 fixed the bug with above way. Changelog v1->v2: v1 will introduce a new bug when delete and create chunk in same disk space in same transaction, noticed by: Filipe David Manana <fdmanana@gmail.com> V2 fix this bug by commit transaction after remove block grops. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Suggested-by: Filipe David Manana <fdmanana@gmail.com> Suggested-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-12 14:18:17 +08:00
Btrfs: make the state of the transaction more readable We used 3 variants to track the state of the transaction, it was complex and wasted the memory space. Besides that, it was hard to understand that which types of the transaction handles should be blocked in each transaction state, so the developers often made mistakes. This patch improved the above problem. In this patch, we define 6 states for the transaction, enum btrfs_trans_state { TRANS_STATE_RUNNING = 0, TRANS_STATE_BLOCKED = 1, TRANS_STATE_COMMIT_START = 2, TRANS_STATE_COMMIT_DOING = 3, TRANS_STATE_UNBLOCKED = 4, TRANS_STATE_COMPLETED = 5, TRANS_STATE_MAX = 6, } and just use 1 variant to track those state. In order to make the blocked handle types for each state more clear, we introduce a array: unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_RUNNING] = 0U, [TRANS_STATE_BLOCKED] = (__TRANS_USERSPACE | __TRANS_START), [TRANS_STATE_COMMIT_START] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN), [TRANS_STATE_UNBLOCKED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), [TRANS_STATE_COMPLETED] = (__TRANS_USERSPACE | __TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | __TRANS_JOIN_NOLOCK), } it is very intuitionistic. Besides that, because we remove ->in_commit in transaction structure, so the lock ->commit_lock which was used to protect it is unnecessary, remove ->commit_lock. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
2013-05-17 11:53:43 +08:00
/* Be protected by fs_info->trans_lock when we want to change it. */
enum btrfs_trans_state state;
int aborted;
struct list_head list;
struct extent_io_tree dirty_pages;
time64_t start_time;
wait_queue_head_t writer_wait;
wait_queue_head_t commit_wait;
struct list_head pending_snapshots;
struct list_head dev_update_list;
struct list_head switch_commits;
struct list_head dirty_bgs;
/*
* There is no explicit lock which protects io_bgs, rather its
* consistency is implied by the fact that all the sites which modify
* it do so under some form of transaction critical section, namely:
*
* - btrfs_start_dirty_block_groups - This function can only ever be
* run by one of the transaction committers. Refer to
* BTRFS_TRANS_DIRTY_BG_RUN usage in btrfs_commit_transaction
*
* - btrfs_write_dirty_blockgroups - this is called by
* commit_cowonly_roots from transaction critical section
* (TRANS_STATE_COMMIT_DOING)
*
* - btrfs_cleanup_dirty_bgs - called on transaction abort
*/
struct list_head io_bgs;
struct list_head dropped_roots;
struct extent_io_tree pinned_extents;
/*
* we need to make sure block group deletion doesn't race with
* free space cache writeout. This mutex keeps them from stomping
* on each other
*/
struct mutex cache_write_mutex;
spinlock_t dirty_bgs_lock;
Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list As of my previous change titled "Btrfs: fix scrub preventing unused block groups from being deleted", the following warning at extent-tree.c:btrfs_delete_unused_bgs() can be hit when we mount the a filesysten with "-o discard": 10263 void btrfs_delete_unused_bgs(struct btrfs_fs_info *fs_info) 10264 { (...) 10405 if (trimming) { 10406 WARN_ON(!list_empty(&block_group->bg_list)); 10407 spin_lock(&trans->transaction->deleted_bgs_lock); 10408 list_move(&block_group->bg_list, 10409 &trans->transaction->deleted_bgs); 10410 spin_unlock(&trans->transaction->deleted_bgs_lock); 10411 btrfs_get_block_group(block_group); 10412 } (...) This happens because scrub can now add back the block group to the list of unused block groups (fs_info->unused_bgs). This is dangerous because we are moving the block group from the unused block groups list to the list of deleted block groups without holding the lock that protects the source list (fs_info->unused_bgs_lock). The following diagram illustrates how this happens: CPU 1 CPU 2 cleaner_kthread() btrfs_delete_unused_bgs() sees bg X in list fs_info->unused_bgs deletes bg X from list fs_info->unused_bgs scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO (again) scrub_chunk(bg X) sets bg X back to RW mode adds bg X to the list fs_info->unused_bgs again, since it's still unused and currently not in that list sets bg X to RO mode btrfs_remove_chunk(bg X) --> discard is enabled and bg X is in the fs_info->unused_bgs list again so the warning is triggered --> we move it from that list into the transaction's delete_bgs list, but we can have another task currently manipulating the first list (fs_info->unused_bgs) Fix this by using the same lock (fs_info->unused_bgs_lock) to protect both the list of unused block groups and the list of deleted block groups. This makes it safe and there's not much worry for more lock contention, as this lock is seldom used and only the cleaner kthread adds elements to the list of deleted block groups. The warning goes away too, as this was previously an impossible case (and would have been better a BUG_ON/ASSERT) but it's not impossible anymore. Reproduced with fstest btrfs/073 (using MOUNT_OPTIONS="-o discard"). Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-11-27 20:16:16 +08:00
/* Protected by spin lock fs_info->unused_bgs_lock. */
struct list_head deleted_bgs;
spinlock_t dropped_roots_lock;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
struct btrfs_delayed_ref_root delayed_refs;
struct btrfs_fs_info *fs_info;
btrfs: make fast fsyncs wait only for writeback Currently regardless of a full or a fast fsync we always wait for ordered extents to complete, and then start logging the inode after that. However for fast fsyncs we can just wait for the writeback to complete, we don't need to wait for the ordered extents to complete since we use the list of modified extents maps to figure out which extents we must log and we can get their checksums directly from the ordered extents that are still in flight, otherwise look them up from the checksums tree. Until commit b5e6c3e170b770 ("btrfs: always wait on ordered extents at fsync time"), for fast fsyncs, we used to start logging without even waiting for the writeback to complete first, we would wait for it to complete after logging, while holding a transaction open, which lead to performance issues when using cgroups and probably for other cases too, as wait for IO while holding a transaction handle should be avoided as much as possible. After that, for fast fsyncs, we started to wait for ordered extents to complete before starting to log, which adds some latency to fsyncs and we even got at least one report about a performance drop which bisected to that particular change: https://lore.kernel.org/linux-btrfs/20181109215148.GF23260@techsingularity.net/ This change makes fast fsyncs only wait for writeback to finish before starting to log the inode, instead of waiting for both the writeback to finish and for the ordered extents to complete. This brings back part of the logic we had that extracts checksums from in flight ordered extents, which are not yet in the checksums tree, and making sure transaction commits wait for the completion of ordered extents previously logged (by far most of the time they have already completed by the time a transaction commit starts, resulting in no wait at all), to avoid any data loss if an ordered extent completes after the transaction used to log an inode is committed, followed by a power failure. When there are no other tasks accessing the checksums and the subvolume btrees, the ordered extent completion is pretty fast, typically taking 100 to 200 microseconds only in my observations. However when there are other tasks accessing these btrees, ordered extent completion can take a lot more time due to lock contention on nodes and leaves of these btrees. I've seen cases over 2 milliseconds, which starts to be significant. In particular when we do have concurrent fsyncs against different files there is a lot of contention on the checksums btree, since we have many tasks writing the checksums into the btree and other tasks that already started the logging phase are doing lookups for checksums in the btree. This change also turns all ranged fsyncs into full ranged fsyncs, which is something we already did when not using the NO_HOLES features or when doing a full fsync. This is to guarantee we never miss checksums due to writeback having been triggered only for a part of an extent, and we end up logging the full extent but only checksums for the written range, which results in missing checksums after log replay. Allowing ranged fsyncs to operate again only in the original range, when using the NO_HOLES feature and doing a fast fsync is doable but requires some non trivial changes to the writeback path, which can always be worked on later if needed, but I don't think they are a very common use case. Several tests were performed using fio for different numbers of concurrent jobs, each writing and fsyncing its own file, for both sequential and random file writes. The tests were run on bare metal, no virtualization, on a box with 12 cores (Intel i7-8700), 64Gb of RAM and a NVMe device, with a kernel configuration that is the default of typical distributions (debian in this case), without debug options enabled (kasan, kmemleak, slub debug, debug of page allocations, lock debugging, etc). The following script that calls fio was used: $ cat test-fsync.sh #!/bin/bash DEV=/dev/nvme0n1 MNT=/mnt/btrfs MOUNT_OPTIONS="-o ssd -o space_cache=v2" MKFS_OPTIONS="-d single -m single" if [ $# -ne 5 ]; then echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ BLOCK_SIZE [write|randwrite]" exit 1 fi NUM_JOBS=$1 FILE_SIZE=$2 FSYNC_FREQ=$3 BLOCK_SIZE=$4 WRITE_MODE=$5 if [ "$WRITE_MODE" != "write" ] && [ "$WRITE_MODE" != "randwrite" ]; then echo "Invalid WRITE_MODE, must be 'write' or 'randwrite'" exit 1 fi cat <<EOF > /tmp/fio-job.ini [writers] rw=$WRITE_MODE fsync=$FSYNC_FREQ fallocate=none group_reporting=1 direct=0 bs=$BLOCK_SIZE ioengine=sync size=$FILE_SIZE directory=$MNT numjobs=$NUM_JOBS EOF echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor echo echo "Using config:" echo cat /tmp/fio-job.ini echo umount $MNT &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT fio /tmp/fio-job.ini umount $MNT The results were the following: ************************* *** sequential writes *** ************************* ==== 1 job, 8GiB file, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=36.6MiB/s (38.4MB/s), 36.6MiB/s-36.6MiB/s (38.4MB/s-38.4MB/s), io=8192MiB (8590MB), run=223689-223689msec After patch: WRITE: bw=40.2MiB/s (42.1MB/s), 40.2MiB/s-40.2MiB/s (42.1MB/s-42.1MB/s), io=8192MiB (8590MB), run=203980-203980msec (+9.8%, -8.8% runtime) ==== 2 jobs, 4GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=35.8MiB/s (37.5MB/s), 35.8MiB/s-35.8MiB/s (37.5MB/s-37.5MB/s), io=8192MiB (8590MB), run=228950-228950msec After patch: WRITE: bw=43.5MiB/s (45.6MB/s), 43.5MiB/s-43.5MiB/s (45.6MB/s-45.6MB/s), io=8192MiB (8590MB), run=188272-188272msec (+21.5% throughput, -17.8% runtime) ==== 4 jobs, 2GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=50.1MiB/s (52.6MB/s), 50.1MiB/s-50.1MiB/s (52.6MB/s-52.6MB/s), io=8192MiB (8590MB), run=163446-163446msec After patch: WRITE: bw=64.5MiB/s (67.6MB/s), 64.5MiB/s-64.5MiB/s (67.6MB/s-67.6MB/s), io=8192MiB (8590MB), run=126987-126987msec (+28.7% throughput, -22.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=64.0MiB/s (68.1MB/s), 64.0MiB/s-64.0MiB/s (68.1MB/s-68.1MB/s), io=8192MiB (8590MB), run=126075-126075msec After patch: WRITE: bw=86.8MiB/s (91.0MB/s), 86.8MiB/s-86.8MiB/s (91.0MB/s-91.0MB/s), io=8192MiB (8590MB), run=94358-94358msec (+35.6% throughput, -25.2% runtime) ==== 16 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=79.8MiB/s (83.6MB/s), 79.8MiB/s-79.8MiB/s (83.6MB/s-83.6MB/s), io=8192MiB (8590MB), run=102694-102694msec After patch: WRITE: bw=107MiB/s (112MB/s), 107MiB/s-107MiB/s (112MB/s-112MB/s), io=8192MiB (8590MB), run=76446-76446msec (+34.1% throughput, -25.6% runtime) ==== 32 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=93.2MiB/s (97.7MB/s), 93.2MiB/s-93.2MiB/s (97.7MB/s-97.7MB/s), io=16.0GiB (17.2GB), run=175836-175836msec After patch: WRITE: bw=111MiB/s (117MB/s), 111MiB/s-111MiB/s (117MB/s-117MB/s), io=16.0GiB (17.2GB), run=147001-147001msec (+19.1% throughput, -16.4% runtime) ==== 64 jobs, 512MiB files, fsync frequency 1, block size 64KiB ==== Before patch: WRITE: bw=108MiB/s (114MB/s), 108MiB/s-108MiB/s (114MB/s-114MB/s), io=32.0GiB (34.4GB), run=302656-302656msec After patch: WRITE: bw=133MiB/s (140MB/s), 133MiB/s-133MiB/s (140MB/s-140MB/s), io=32.0GiB (34.4GB), run=246003-246003msec (+23.1% throughput, -18.7% runtime) ************************ *** random writes *** ************************ ==== 1 job, 8GiB file, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=11.5MiB/s (12.0MB/s), 11.5MiB/s-11.5MiB/s (12.0MB/s-12.0MB/s), io=8192MiB (8590MB), run=714281-714281msec After patch: WRITE: bw=11.6MiB/s (12.2MB/s), 11.6MiB/s-11.6MiB/s (12.2MB/s-12.2MB/s), io=8192MiB (8590MB), run=705959-705959msec (+0.9% throughput, -1.7% runtime) ==== 2 jobs, 4GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=12.8MiB/s (13.5MB/s), 12.8MiB/s-12.8MiB/s (13.5MB/s-13.5MB/s), io=8192MiB (8590MB), run=638101-638101msec After patch: WRITE: bw=13.1MiB/s (13.7MB/s), 13.1MiB/s-13.1MiB/s (13.7MB/s-13.7MB/s), io=8192MiB (8590MB), run=625374-625374msec (+2.3% throughput, -2.0% runtime) ==== 4 jobs, 2GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=15.4MiB/s (16.2MB/s), 15.4MiB/s-15.4MiB/s (16.2MB/s-16.2MB/s), io=8192MiB (8590MB), run=531146-531146msec After patch: WRITE: bw=17.8MiB/s (18.7MB/s), 17.8MiB/s-17.8MiB/s (18.7MB/s-18.7MB/s), io=8192MiB (8590MB), run=460431-460431msec (+15.6% throughput, -13.3% runtime) ==== 8 jobs, 1GiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=19.9MiB/s (20.8MB/s), 19.9MiB/s-19.9MiB/s (20.8MB/s-20.8MB/s), io=8192MiB (8590MB), run=412664-412664msec After patch: WRITE: bw=22.2MiB/s (23.3MB/s), 22.2MiB/s-22.2MiB/s (23.3MB/s-23.3MB/s), io=8192MiB (8590MB), run=368589-368589msec (+11.6% throughput, -10.7% runtime) ==== 16 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=29.3MiB/s (30.7MB/s), 29.3MiB/s-29.3MiB/s (30.7MB/s-30.7MB/s), io=8192MiB (8590MB), run=279924-279924msec After patch: WRITE: bw=30.4MiB/s (31.9MB/s), 30.4MiB/s-30.4MiB/s (31.9MB/s-31.9MB/s), io=8192MiB (8590MB), run=269258-269258msec (+3.8% throughput, -3.8% runtime) ==== 32 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=36.9MiB/s (38.7MB/s), 36.9MiB/s-36.9MiB/s (38.7MB/s-38.7MB/s), io=16.0GiB (17.2GB), run=443581-443581msec After patch: WRITE: bw=41.6MiB/s (43.6MB/s), 41.6MiB/s-41.6MiB/s (43.6MB/s-43.6MB/s), io=16.0GiB (17.2GB), run=394114-394114msec (+12.7% throughput, -11.2% runtime) ==== 64 jobs, 512MiB files, fsync frequency 16, block size 4KiB ==== Before patch: WRITE: bw=45.9MiB/s (48.1MB/s), 45.9MiB/s-45.9MiB/s (48.1MB/s-48.1MB/s), io=32.0GiB (34.4GB), run=714614-714614msec After patch: WRITE: bw=48.8MiB/s (51.1MB/s), 48.8MiB/s-48.8MiB/s (51.1MB/s-51.1MB/s), io=32.0GiB (34.4GB), run=672087-672087msec (+6.3% throughput, -6.0% runtime) Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-11 19:43:58 +08:00
/*
* Number of ordered extents the transaction must wait for before
* committing. These are ordered extents started by a fast fsync.
*/
atomic_t pending_ordered;
wait_queue_head_t pending_wait;
spinlock_t releasing_ebs_lock;
struct list_head releasing_ebs;
btrfs: fix exhaustion of the system chunk array due to concurrent allocations When we are running out of space for updating the chunk tree, that is, when we are low on available space in the system space info, if we have many task concurrently allocating block groups, via fallocate for example, many of them can end up all allocating new system chunks when only one is needed. In extreme cases this can lead to exhaustion of the system chunk array, which has a size limit of 2048 bytes, and results in a transaction abort with errno EFBIG, producing a trace in dmesg like the following, which was triggered on a PowerPC machine with a node/leaf size of 64K: [1359.518899] ------------[ cut here ]------------ [1359.518980] BTRFS: Transaction aborted (error -27) [1359.519135] WARNING: CPU: 3 PID: 16463 at ../fs/btrfs/block-group.c:1968 btrfs_create_pending_block_groups+0x340/0x3c0 [btrfs] [1359.519152] Modules linked in: (...) [1359.519239] Supported: Yes, External [1359.519252] CPU: 3 PID: 16463 Comm: stress-ng Tainted: G X 5.3.18-47-default #1 SLE15-SP3 [1359.519274] NIP: c008000000e36fe8 LR: c008000000e36fe4 CTR: 00000000006de8e8 [1359.519293] REGS: c00000056890b700 TRAP: 0700 Tainted: G X (5.3.18-47-default) [1359.519317] MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48008222 XER: 00000007 [1359.519356] CFAR: c00000000013e170 IRQMASK: 0 [1359.519356] GPR00: c008000000e36fe4 c00000056890b990 c008000000e83200 0000000000000026 [1359.519356] GPR04: 0000000000000000 0000000000000000 0000d52a3b027651 0000000000000007 [1359.519356] GPR08: 0000000000000003 0000000000000001 0000000000000007 0000000000000000 [1359.519356] GPR12: 0000000000008000 c00000063fe44600 000000001015e028 000000001015dfd0 [1359.519356] GPR16: 000000000000404f 0000000000000001 0000000000010000 0000dd1e287affff [1359.519356] GPR20: 0000000000000001 c000000637c9a000 ffffffffffffffe5 0000000000000000 [1359.519356] GPR24: 0000000000000004 0000000000000000 0000000000000100 ffffffffffffffc0 [1359.519356] GPR28: c000000637c9a000 c000000630e09230 c000000630e091d8 c000000562188b08 [1359.519561] NIP [c008000000e36fe8] btrfs_create_pending_block_groups+0x340/0x3c0 [btrfs] [1359.519613] LR [c008000000e36fe4] btrfs_create_pending_block_groups+0x33c/0x3c0 [btrfs] [1359.519626] Call Trace: [1359.519671] [c00000056890b990] [c008000000e36fe4] btrfs_create_pending_block_groups+0x33c/0x3c0 [btrfs] (unreliable) [1359.519729] [c00000056890ba90] [c008000000d68d44] __btrfs_end_transaction+0xbc/0x2f0 [btrfs] [1359.519782] [c00000056890bae0] [c008000000e309ac] btrfs_alloc_data_chunk_ondemand+0x154/0x610 [btrfs] [1359.519844] [c00000056890bba0] [c008000000d8a0fc] btrfs_fallocate+0xe4/0x10e0 [btrfs] [1359.519891] [c00000056890bd00] [c0000000004a23b4] vfs_fallocate+0x174/0x350 [1359.519929] [c00000056890bd50] [c0000000004a3cf8] ksys_fallocate+0x68/0xf0 [1359.519957] [c00000056890bda0] [c0000000004a3da8] sys_fallocate+0x28/0x40 [1359.519988] [c00000056890bdc0] [c000000000038968] system_call_exception+0xe8/0x170 [1359.520021] [c00000056890be20] [c00000000000cb70] system_call_common+0xf0/0x278 [1359.520037] Instruction dump: [1359.520049] 7d0049ad 40c2fff4 7c0004ac 71490004 40820024 2f83fffb 419e0048 3c620000 [1359.520082] e863bcb8 7ec4b378 48010d91 e8410018 <0fe00000> 3c820000 e884bcc8 7ec6b378 [1359.520122] ---[ end trace d6c186e151022e20 ]--- The following steps explain how we can end up in this situation: 1) Task A is at check_system_chunk(), either because it is allocating a new data or metadata block group, at btrfs_chunk_alloc(), or because it is removing a block group or turning a block group RO. It does not matter why; 2) Task A sees that there is not enough free space in the system space_info object, that is 'left' is < 'thresh'. And at this point the system space_info has a value of 0 for its 'bytes_may_use' counter; 3) As a consequence task A calls btrfs_alloc_chunk() in order to allocate a new system block group (chunk) and then reserves 'thresh' bytes in the chunk block reserve with the call to btrfs_block_rsv_add(). This changes the chunk block reserve's 'reserved' and 'size' counters by an amount of 'thresh', and changes the 'bytes_may_use' counter of the system space_info object from 0 to 'thresh'. Also during its call to btrfs_alloc_chunk(), we end up increasing the value of the 'total_bytes' counter of the system space_info object by 8MiB (the size of a system chunk stripe). This happens through the call chain: btrfs_alloc_chunk() create_chunk() btrfs_make_block_group() btrfs_update_space_info() 4) After it finishes the first phase of the block group allocation, at btrfs_chunk_alloc(), task A unlocks the chunk mutex; 5) At this point the new system block group was added to the transaction handle's list of new block groups, but its block group item, device items and chunk item were not yet inserted in the extent, device and chunk trees, respectively. That only happens later when we call btrfs_finish_chunk_alloc() through a call to btrfs_create_pending_block_groups(); Note that only when we update the chunk tree, through the call to btrfs_finish_chunk_alloc(), we decrement the 'reserved' counter of the chunk block reserve as we COW/allocate extent buffers, through: btrfs_alloc_tree_block() btrfs_use_block_rsv() btrfs_block_rsv_use_bytes() And the system space_info's 'bytes_may_use' is decremented everytime we allocate an extent buffer for COW operations on the chunk tree, through: btrfs_alloc_tree_block() btrfs_reserve_extent() find_free_extent() btrfs_add_reserved_bytes() If we end up COWing less chunk btree nodes/leaves than expected, which is the typical case since the amount of space we reserve is always pessimistic to account for the worst possible case, we release the unused space through: btrfs_create_pending_block_groups() btrfs_trans_release_chunk_metadata() btrfs_block_rsv_release() block_rsv_release_bytes() btrfs_space_info_free_bytes_may_use() But before task A gets into btrfs_create_pending_block_groups()... 6) Many other tasks start allocating new block groups through fallocate, each one does the first phase of block group allocation in a serialized way, since btrfs_chunk_alloc() takes the chunk mutex before calling check_system_chunk() and btrfs_alloc_chunk(). However before everyone enters the final phase of the block group allocation, that is, before calling btrfs_create_pending_block_groups(), new tasks keep coming to allocate new block groups and while at check_system_chunk(), the system space_info's 'bytes_may_use' keeps increasing each time a task reserves space in the chunk block reserve. This means that eventually some other task can end up not seeing enough free space in the system space_info and decide to allocate yet another system chunk. This may repeat several times if yet more new tasks keep allocating new block groups before task A, and all the other tasks, finish the creation of the pending block groups, which is when reserved space in excess is released. Eventually this can result in exhaustion of system chunk array in the superblock, with btrfs_add_system_chunk() returning EFBIG, resulting later in a transaction abort. Even when we don't reach the extreme case of exhausting the system array, most, if not all, unnecessarily created system block groups end up being unused since when finishing creation of the first pending system block group, the creation of the following ones end up not needing to COW nodes/leaves of the chunk tree, so we never allocate and deallocate from them, resulting in them never being added to the list of unused block groups - as a consequence they don't get deleted by the cleaner kthread - the only exceptions are if we unmount and mount the filesystem again, which adds any unused block groups to the list of unused block groups, if a scrub is run, which also adds unused block groups to the unused list, and under some circumstances when using a zoned filesystem or async discard, which may also add unused block groups to the unused list. So fix this by: *) Tracking the number of reserved bytes for the chunk tree per transaction, which is the sum of reserved chunk bytes by each transaction handle currently being used; *) When there is not enough free space in the system space_info, if there are other transaction handles which reserved chunk space, wait for some of them to complete in order to have enough excess reserved space released, and then try again. Otherwise proceed with the creation of a new system chunk. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-03-31 18:55:50 +08:00
/*
* The number of bytes currently reserved, by all transaction handles
* attached to this transaction, for metadata extents of the chunk tree.
*/
atomic64_t chunk_bytes_reserved;
wait_queue_head_t chunk_reserve_wait;
};
#define __TRANS_FREEZABLE (1U << 0)
#define __TRANS_START (1U << 9)
#define __TRANS_ATTACH (1U << 10)
#define __TRANS_JOIN (1U << 11)
#define __TRANS_JOIN_NOLOCK (1U << 12)
#define __TRANS_DUMMY (1U << 13)
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
#define __TRANS_JOIN_NOSTART (1U << 14)
#define TRANS_START (__TRANS_START | __TRANS_FREEZABLE)
#define TRANS_ATTACH (__TRANS_ATTACH)
#define TRANS_JOIN (__TRANS_JOIN | __TRANS_FREEZABLE)
#define TRANS_JOIN_NOLOCK (__TRANS_JOIN_NOLOCK)
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
#define TRANS_JOIN_NOSTART (__TRANS_JOIN_NOSTART)
#define TRANS_EXTWRITERS (__TRANS_START | __TRANS_ATTACH)
#define BTRFS_SEND_TRANS_STUB ((void *)1)
struct btrfs_trans_handle {
u64 transid;
u64 bytes_reserved;
Btrfs: fix -ENOSPC when finishing block group creation While creating a block group, we often end up getting ENOSPC while updating the chunk tree, which leads to a transaction abortion that produces a trace like the following: [30670.116368] WARNING: CPU: 4 PID: 20735 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [30670.117777] BTRFS: Transaction aborted (error -28) (...) [30670.163567] Call Trace: [30670.163906] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [30670.164522] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [30670.165171] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [30670.166323] [<ffffffffa035daa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.167213] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [30670.167862] [<ffffffffa035daa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [30670.169116] [<ffffffffa03743d7>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [30670.170593] [<ffffffffa038426a>] __btrfs_end_transaction+0x84/0x366 [btrfs] [30670.171960] [<ffffffffa038455c>] btrfs_end_transaction+0x10/0x12 [btrfs] [30670.174649] [<ffffffffa036eb6b>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [30670.176092] [<ffffffffa039450d>] btrfs_fallocate+0x7c8/0xb96 [btrfs] [30670.177218] [<ffffffff812459f2>] ? __this_cpu_preempt_check+0x13/0x15 [30670.178622] [<ffffffff81152447>] vfs_fallocate+0x14c/0x1de [30670.179642] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [30670.180692] [<ffffffff81152863>] SyS_fallocate+0x47/0x62 [30670.186737] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [30670.187792] ---[ end trace 0373e6b491c4a8cc ]--- This is because we don't do proper space reservation for the chunk block reserve when we have multiple tasks allocating chunks in parallel. So block group creation has 2 phases, and the first phase essentially checks if there is enough space in the system space_info, allocating a new system chunk if there isn't, while the second phase updates the device, extent and chunk trees. However, because the updates to the chunk tree happen in the second phase, if we have N tasks, each with its own transaction handle, allocating new chunks in parallel and if there is only enough space in the system space_info to allocate M chunks, where M < N, none of the tasks ends up allocating a new system chunk in the first phase and N - M tasks will get -ENOSPC when attempting to update the chunk tree in phase 2 if they need to COW any nodes/leafs from the chunk tree. Fix this by doing proper reservation in the chunk block reserve. The issue could be reproduced by running fstests generic/038 in a loop, which eventually triggered the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-05-20 21:01:54 +08:00
u64 chunk_bytes_reserved;
Btrfs: do extent allocation and reference count updates in the background The extent allocation tree maintains a reference count and full back reference information for every extent allocated in the filesystem. For subvolume and snapshot trees, every time a block goes through COW, the new copy of the block adds a reference on every block it points to. If a btree node points to 150 leaves, then the COW code needs to go and add backrefs on 150 different extents, which might be spread all over the extent allocation tree. These updates currently happen during btrfs_cow_block, and most COWs happen during btrfs_search_slot. btrfs_search_slot has locks held on both the parent and the node we are COWing, and so we really want to avoid IO during the COW if we can. This commit adds an rbtree of pending reference count updates and extent allocations. The tree is ordered by byte number of the extent and byte number of the parent for the back reference. The tree allows us to: 1) Modify back references in something close to disk order, reducing seeks 2) Significantly reduce the number of modifications made as block pointers are balanced around 3) Do all of the extent insertion and back reference modifications outside of the performance critical btrfs_search_slot code. #3 has the added benefit of greatly reducing the btrfs stack footprint. The extent allocation tree modifications are done without the deep (and somewhat recursive) call chains used in the past. These delayed back reference updates must be done before the transaction commits, and so the rbtree is tied to the transaction. Throttling is implemented to help keep the queue of backrefs at a reasonable size. Since there was a similar mechanism in place for the extent tree extents, that is removed and replaced by the delayed reference tree. Yan Zheng <yan.zheng@oracle.com> helped review and fixup this code. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-13 22:10:06 +08:00
unsigned long delayed_ref_updates;
struct btrfs_transaction *transaction;
struct btrfs_block_rsv *block_rsv;
struct btrfs_block_rsv *orig_rsv;
refcount_t use_count;
unsigned int type;
/*
* Error code of transaction abort, set outside of locks and must use
* the READ_ONCE/WRITE_ONCE access
*/
short aborted;
bool adding_csums;
bool allocating_chunk;
Btrfs: fix deadlock when finalizing block group creation Josef ran into a deadlock while a transaction handle was finalizing the creation of its block groups, which produced the following trace: [260445.593112] fio D ffff88022a9df468 0 8924 4518 0x00000084 [260445.593119] ffff88022a9df468 ffffffff81c134c0 ffff880429693c00 ffff88022a9df488 [260445.593126] ffff88022a9e0000 ffff8803490d7b00 ffff8803490d7b18 ffff88022a9df4b0 [260445.593132] ffff8803490d7af8 ffff88022a9df488 ffffffff8175a437 ffff8803490d7b00 [260445.593137] Call Trace: [260445.593145] [<ffffffff8175a437>] schedule+0x37/0x80 [260445.593189] [<ffffffffa0850f37>] btrfs_tree_lock+0xa7/0x1f0 [btrfs] [260445.593197] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0 [260445.593225] [<ffffffffa07eac44>] btrfs_lock_root_node+0x34/0x50 [btrfs] [260445.593253] [<ffffffffa07eff6b>] btrfs_search_slot+0x88b/0xa00 [btrfs] [260445.593295] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs] [260445.593324] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [260445.593351] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [260445.593394] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs] [260445.593427] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs] [260445.593459] [<ffffffffa0800964>] do_chunk_alloc+0x2a4/0x2e0 [btrfs] [260445.593491] [<ffffffffa0803815>] find_free_extent+0xa55/0xd90 [btrfs] [260445.593524] [<ffffffffa0803c22>] btrfs_reserve_extent+0xd2/0x220 [btrfs] [260445.593532] [<ffffffff8119fe5d>] ? account_page_dirtied+0xdd/0x170 [260445.593564] [<ffffffffa0803e78>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs] [260445.593597] [<ffffffffa080c9de>] ? btree_set_page_dirty+0xe/0x10 [btrfs] [260445.593626] [<ffffffffa07eb5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs] [260445.593654] [<ffffffffa07ebbff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [260445.593682] [<ffffffffa07ef8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs] [260445.593724] [<ffffffffa08389df>] ? free_extent_buffer+0x4f/0x90 [btrfs] [260445.593752] [<ffffffffa07f1a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [260445.593830] [<ffffffffa07ea94a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [260445.593905] [<ffffffffa08403b9>] btrfs_finish_chunk_alloc+0x1c9/0x570 [btrfs] [260445.593946] [<ffffffffa08002ab>] btrfs_create_pending_block_groups+0x11b/0x200 [btrfs] [260445.593990] [<ffffffffa0815798>] btrfs_commit_transaction+0xa8/0xb40 [btrfs] [260445.594042] [<ffffffffa085abcd>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs] [260445.594089] [<ffffffffa082bc84>] btrfs_sync_file+0x294/0x350 [btrfs] [260445.594115] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0 [260445.594133] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180 [260445.594149] [<ffffffff8123e35d>] do_fsync+0x3d/0x70 [260445.594169] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110 [260445.594187] [<ffffffff8123e600>] SyS_fsync+0x10/0x20 [260445.594204] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71 This happened because the same transaction handle created a large number of block groups and while finalizing their creation (inserting new items and updating existing items in the chunk and device trees) a new metadata extent had to be allocated and no free space was found in the current metadata block groups, which made find_free_extent() attempt to allocate a new block group via do_chunk_alloc(). However at do_chunk_alloc() we ended up allocating a new system chunk too and exceeded the threshold of 2Mb of reserved chunk bytes, which makes do_chunk_alloc() enter the final part of block group creation again (at btrfs_create_pending_block_groups()) and attempt to lock again the root of the chunk tree when it's already write locked by the same task. Similarly we can deadlock on extent tree nodes/leafs if while we are running delayed references we end up creating a new metadata block group in order to allocate a new node/leaf for the extent tree (as part of a CoW operation or growing the tree), as btrfs_create_pending_block_groups inserts items into the extent tree as well. In this case we get the following trace: [14242.773581] fio D ffff880428ca3418 0 3615 3100 0x00000084 [14242.773588] ffff880428ca3418 ffff88042d66b000 ffff88042a03c800 ffff880428ca3438 [14242.773594] ffff880428ca4000 ffff8803e4b20190 ffff8803e4b201a8 ffff880428ca3460 [14242.773600] ffff8803e4b20188 ffff880428ca3438 ffffffff8175a437 ffff8803e4b20190 [14242.773606] Call Trace: [14242.773613] [<ffffffff8175a437>] schedule+0x37/0x80 [14242.773656] [<ffffffffa057ff07>] btrfs_tree_lock+0xa7/0x1f0 [btrfs] [14242.773664] [<ffffffff810db7c0>] ? prepare_to_wait_event+0xf0/0xf0 [14242.773692] [<ffffffffa0519c44>] btrfs_lock_root_node+0x34/0x50 [btrfs] [14242.773720] [<ffffffffa051ef6b>] btrfs_search_slot+0x88b/0xa00 [btrfs] [14242.773750] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [14242.773758] [<ffffffff811ef4a2>] ? kmem_cache_alloc+0x1d2/0x200 [14242.773786] [<ffffffffa0520ad1>] btrfs_insert_item+0x71/0xf0 [btrfs] [14242.773818] [<ffffffffa052f292>] btrfs_create_pending_block_groups+0x102/0x200 [btrfs] [14242.773850] [<ffffffffa052f96e>] do_chunk_alloc+0x2ae/0x2f0 [btrfs] [14242.773934] [<ffffffffa0532825>] find_free_extent+0xa55/0xd90 [btrfs] [14242.773998] [<ffffffffa0532c22>] btrfs_reserve_extent+0xc2/0x1d0 [btrfs] [14242.774041] [<ffffffffa0532e38>] btrfs_alloc_tree_block+0x108/0x4a0 [btrfs] [14242.774078] [<ffffffffa051a5cd>] __btrfs_cow_block+0x12d/0x5b0 [btrfs] [14242.774118] [<ffffffffa051abff>] btrfs_cow_block+0x11f/0x1c0 [btrfs] [14242.774155] [<ffffffffa051e8c7>] btrfs_search_slot+0x1e7/0xa00 [btrfs] [14242.774194] [<ffffffffa0528021>] ? __btrfs_free_extent.isra.70+0x2e1/0xcb0 [btrfs] [14242.774235] [<ffffffffa0520a06>] btrfs_insert_empty_items+0x66/0xc0 [btrfs] [14242.774274] [<ffffffffa051994a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [14242.774318] [<ffffffffa052c433>] __btrfs_run_delayed_refs+0xbb3/0x1020 [btrfs] [14242.774358] [<ffffffffa052f404>] btrfs_run_delayed_refs.part.78+0x74/0x280 [btrfs] [14242.774391] [<ffffffffa052f627>] btrfs_run_delayed_refs+0x17/0x20 [btrfs] [14242.774432] [<ffffffffa05be236>] commit_cowonly_roots+0x8d/0x2bd [btrfs] [14242.774474] [<ffffffffa059d07f>] ? __btrfs_run_delayed_items+0x1cf/0x210 [btrfs] [14242.774516] [<ffffffffa05adac3>] ? btrfs_qgroup_account_extents+0x83/0x130 [btrfs] [14242.774558] [<ffffffffa0544c40>] btrfs_commit_transaction+0x590/0xb40 [btrfs] [14242.774599] [<ffffffffa0589b9d>] ? btrfs_log_dentry_safe+0x6d/0x80 [btrfs] [14242.774642] [<ffffffffa055ac54>] btrfs_sync_file+0x294/0x350 [btrfs] [14242.774650] [<ffffffff8123e29b>] vfs_fsync_range+0x3b/0xa0 [14242.774657] [<ffffffff81023891>] ? syscall_trace_enter_phase1+0x131/0x180 [14242.774663] [<ffffffff8123e35d>] do_fsync+0x3d/0x70 [14242.774669] [<ffffffff81023bb8>] ? syscall_trace_leave+0xb8/0x110 [14242.774675] [<ffffffff8123e600>] SyS_fsync+0x10/0x20 [14242.774681] [<ffffffff8175de6e>] entry_SYSCALL_64_fastpath+0x12/0x71 Fix this by never recursing into the finalization phase of block group creation and making sure we never trigger the finalization of block group creation while running delayed references. Reported-by: Josef Bacik <jbacik@fb.com> Fixes: 00d80e342c0f ("Btrfs: fix quick exhaustion of the system array in the superblock") Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-10-03 20:13:13 +08:00
bool can_flush_pending_bgs;
Btrfs: fix BUG_ON() casued by the reserved space migration When we did space balance and snapshot creation at the same time, we might meet the following oops: kernel BUG at fs/btrfs/inode.c:3038! [SNIP] Call Trace: [<ffffffffa0411ec7>] btrfs_orphan_cleanup+0x293/0x407 [btrfs] [<ffffffffa042dc45>] btrfs_mksubvol.isra.28+0x259/0x373 [btrfs] [<ffffffffa042de85>] btrfs_ioctl_snap_create_transid+0x126/0x156 [btrfs] [<ffffffffa042dff1>] btrfs_ioctl_snap_create_v2+0xd0/0x121 [btrfs] [<ffffffffa0430b2c>] btrfs_ioctl+0x414/0x1854 [btrfs] [<ffffffff813b60b7>] ? __do_page_fault+0x305/0x379 [<ffffffff811215a9>] vfs_ioctl+0x1d/0x39 [<ffffffff81121d7c>] do_vfs_ioctl+0x32d/0x3e2 [<ffffffff81057fe7>] ? finish_task_switch+0x80/0xb8 [<ffffffff81121e88>] SyS_ioctl+0x57/0x83 [<ffffffff813b39ff>] ? do_device_not_available+0x12/0x14 [<ffffffff813b99c2>] system_call_fastpath+0x16/0x1b [SNIP] RIP [<ffffffffa040da40>] btrfs_orphan_add+0xc3/0x126 [btrfs] The reason of the problem is that the relocation root creation stole the reserved space, which was reserved for orphan item deletion. There are several ways to fix this problem, one is to increasing the reserved space size of the space balace, and then we can use that space to create the relocation tree for each fs/file trees. But it is hard to calculate the suitable size because we doesn't know how many fs/file trees we need relocate. We fixed this problem by reserving the space for relocation root creation actively since the space it need is very small (one tree block, used for root node copy), then we use that reserved space to create the relocation tree. If we don't reserve space for relocation tree creation, we will use the reserved space of the balance. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-09-25 21:47:45 +08:00
bool reloc_reserved;
bool dirty;
btrfs: make concurrent fsyncs wait less when waiting for a transaction commit Often an fsync needs to fallback to a transaction commit for several reasons (to ensure consistency after a power failure, a new block group was allocated or a temporary error such as ENOMEM or ENOSPC happened). In that case the log is marked as needing a full commit and any concurrent tasks attempting to log inodes or commit the log will also fallback to the transaction commit. When this happens they all wait for the task that first started the transaction commit to finish the transaction commit - however they wait until the full transaction commit happens, which is not needed, as they only need to wait for the superblocks to be persisted and not for unpinning all the extents pinned during the transaction's lifetime, which even for short lived transactions can be a few thousand and take some significant amount of time to complete - for dbench workloads I have observed up to 4~5 milliseconds of time spent unpinning extents in the worst cases, and the number of pinned extents was between 2 to 3 thousand. So allow fsync tasks to skip waiting for the unpinning of extents when they call btrfs_commit_transaction() and they were not the task that started the transaction commit (that one has to do it, the alternative would be to offload the transaction commit to another task so that it could avoid waiting for the extent unpinning or offload the extent unpinning to another task). This patch is part of a patchset comprised of the following patches: btrfs: remove unnecessary directory inode item update when deleting dir entry btrfs: stop setting nbytes when filling inode item for logging btrfs: avoid logging new ancestor inodes when logging new inode btrfs: skip logging directories already logged when logging all parents btrfs: skip logging inodes already logged when logging new entries btrfs: remove unnecessary check_parent_dirs_for_sync() btrfs: make concurrent fsyncs wait less when waiting for a transaction commit After applying the entire patchset, dbench shows improvements in respect to throughput and latency. The script used to measure it is the following: $ cat dbench-test.sh #!/bin/bash DEV=/dev/sdk MNT=/mnt/sdk MOUNT_OPTIONS="-o ssd" MKFS_OPTIONS="-m single -d single" echo "performance" | tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor umount $DEV &> /dev/null mkfs.btrfs -f $MKFS_OPTIONS $DEV mount $MOUNT_OPTIONS $DEV $MNT dbench -D $MNT -t 300 64 umount $MNT The test was run on a physical machine with 12 cores (Intel corei7), 64G of ram, using a NVMe device and a non-debug kernel configuration (Debian's default configuration). Before applying patchset, 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9627107 0.153 61.938 Close 7072076 0.001 3.175 Rename 407633 1.222 44.439 Unlink 1943895 0.658 44.440 Deltree 256 17.339 110.891 Mkdir 128 0.003 0.009 Qpathinfo 8725406 0.064 17.850 Qfileinfo 1529516 0.001 2.188 Qfsinfo 1599884 0.002 1.457 Sfileinfo 784200 0.005 3.562 Find 3373513 0.411 30.312 WriteX 4802132 0.053 29.054 ReadX 15089959 0.002 5.801 LockX 31344 0.002 0.425 UnlockX 31344 0.001 0.173 Flush 674724 5.952 341.830 Throughput 1008.02 MB/sec 32 clients 32 procs max_latency=341.833 ms After applying patchset, 32 clients: After patchset, with 32 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9931568 0.111 25.597 Close 7295730 0.001 2.171 Rename 420549 0.982 49.714 Unlink 2005366 0.497 39.015 Deltree 256 11.149 89.242 Mkdir 128 0.002 0.014 Qpathinfo 9001863 0.049 20.761 Qfileinfo 1577730 0.001 2.546 Qfsinfo 1650508 0.002 3.531 Sfileinfo 809031 0.005 5.846 Find 3480259 0.309 23.977 WriteX 4952505 0.043 41.283 ReadX 15568127 0.002 5.476 LockX 32338 0.002 0.978 UnlockX 32338 0.001 2.032 Flush 696017 7.485 228.835 Throughput 1049.91 MB/sec 32 clients 32 procs max_latency=228.847 ms --> +4.1% throughput, -39.6% max latency Before applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 8956748 0.342 108.312 Close 6579660 0.001 3.823 Rename 379209 2.396 81.897 Unlink 1808625 1.108 131.148 Deltree 256 25.632 172.176 Mkdir 128 0.003 0.018 Qpathinfo 8117615 0.131 55.916 Qfileinfo 1423495 0.001 2.635 Qfsinfo 1488496 0.002 5.412 Sfileinfo 729472 0.007 8.643 Find 3138598 0.855 78.321 WriteX 4470783 0.102 79.442 ReadX 14038139 0.002 7.578 LockX 29158 0.002 0.844 UnlockX 29158 0.001 0.567 Flush 627746 14.168 506.151 Throughput 924.738 MB/sec 64 clients 64 procs max_latency=506.154 ms After applying patchset, 64 clients: Operation Count AvgLat MaxLat ---------------------------------------- NTCreateX 9069003 0.303 43.193 Close 6662328 0.001 3.888 Rename 383976 2.194 46.418 Unlink 1831080 1.022 43.873 Deltree 256 24.037 155.763 Mkdir 128 0.002 0.005 Qpathinfo 8219173 0.137 30.233 Qfileinfo 1441203 0.001 3.204 Qfsinfo 1507092 0.002 4.055 Sfileinfo 738775 0.006 5.431 Find 3177874 0.936 38.170 WriteX 4526152 0.084 39.518 ReadX 14213562 0.002 24.760 LockX 29522 0.002 1.221 UnlockX 29522 0.001 0.694 Flush 635652 14.358 422.039 Throughput 990.13 MB/sec 64 clients 64 procs max_latency=422.043 ms --> +6.8% throughput, -18.1% max latency Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-27 18:35:00 +08:00
bool in_fsync;
struct btrfs_root *root;
struct btrfs_fs_info *fs_info;
struct list_head new_bgs;
};
/*
* The abort status can be changed between calls and is not protected by locks.
* This accepts btrfs_transaction and btrfs_trans_handle as types. Once it's
* set to a non-zero value it does not change, so the macro should be in checks
* but is not necessary for further reads of the value.
*/
#define TRANS_ABORTED(trans) (unlikely(READ_ONCE((trans)->aborted)))
struct btrfs_pending_snapshot {
struct dentry *dentry;
struct inode *dir;
struct btrfs_root *root;
struct btrfs_root_item *root_item;
struct btrfs_root *snap;
struct btrfs_qgroup_inherit *inherit;
struct btrfs_path *path;
/* block reservation for the operation */
struct btrfs_block_rsv block_rsv;
/* extra metadata reservation for relocation */
int error;
btrfs: preallocate anon block device at first phase of snapshot creation [BUG] When the anonymous block device pool is exhausted, subvolume/snapshot creation fails with EMFILE (Too many files open). This has been reported by a user. The allocation happens in the second phase during transaction commit where it's only way out is to abort the transaction BTRFS: Transaction aborted (error -24) WARNING: CPU: 17 PID: 17041 at fs/btrfs/transaction.c:1576 create_pending_snapshot+0xbc4/0xd10 [btrfs] RIP: 0010:create_pending_snapshot+0xbc4/0xd10 [btrfs] Call Trace: create_pending_snapshots+0x82/0xa0 [btrfs] btrfs_commit_transaction+0x275/0x8c0 [btrfs] btrfs_mksubvol+0x4b9/0x500 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0x11a4/0x2da0 [btrfs] do_vfs_ioctl+0xa9/0x640 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x5a/0x110 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace 33f2f83f3d5250e9 ]--- BTRFS: error (device sda1) in create_pending_snapshot:1576: errno=-24 unknown BTRFS info (device sda1): forced readonly BTRFS warning (device sda1): Skipping commit of aborted transaction. BTRFS: error (device sda1) in cleanup_transaction:1831: errno=-24 unknown [CAUSE] When the global anonymous block device pool is exhausted, the following call chain will fail, and lead to transaction abort: btrfs_ioctl_snap_create_v2() |- btrfs_ioctl_snap_create_transid() |- btrfs_mksubvol() |- btrfs_commit_transaction() |- create_pending_snapshot() |- btrfs_get_fs_root() |- btrfs_init_fs_root() |- get_anon_bdev() [FIX] Although we can't enlarge the anonymous block device pool, at least we can preallocate anon_dev for subvolume/snapshot in the first phase, outside of transaction context and exactly at the moment the user calls the creation ioctl. Reported-by: Greed Rong <greedrong@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CA+UqX+NTrZ6boGnWHhSeZmEY5J76CTqmYjO2S+=tHJX7nb9DPw@mail.gmail.com/ CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-06-16 10:17:36 +08:00
/* Preallocated anonymous block device number */
dev_t anon_dev;
bool readonly;
struct list_head list;
};
static inline void btrfs_set_inode_last_trans(struct btrfs_trans_handle *trans,
struct btrfs_inode *inode)
{
spin_lock(&inode->lock);
inode->last_trans = trans->transaction->transid;
inode->last_sub_trans = inode->root->log_transid;
btrfs: fix race between marking inode needs to be logged and log syncing We have a race between marking that an inode needs to be logged, either at btrfs_set_inode_last_trans() or at btrfs_page_mkwrite(), and between btrfs_sync_log(). The following steps describe how the race happens. 1) We are at transaction N; 2) Inode I was previously fsynced in the current transaction so it has: inode->logged_trans set to N; 3) The inode's root currently has: root->log_transid set to 1 root->last_log_commit set to 0 Which means only one log transaction was committed to far, log transaction 0. When a log tree is created we set ->log_transid and ->last_log_commit of its parent root to 0 (at btrfs_add_log_tree()); 4) One more range of pages is dirtied in inode I; 5) Some task A starts an fsync against some other inode J (same root), and so it joins log transaction 1. Before task A calls btrfs_sync_log()... 6) Task B starts an fsync against inode I, which currently has the full sync flag set, so it starts delalloc and waits for the ordered extent to complete before calling btrfs_inode_in_log() at btrfs_sync_file(); 7) During ordered extent completion we have btrfs_update_inode() called against inode I, which in turn calls btrfs_set_inode_last_trans(), which does the following: spin_lock(&inode->lock); inode->last_trans = trans->transaction->transid; inode->last_sub_trans = inode->root->log_transid; inode->last_log_commit = inode->root->last_log_commit; spin_unlock(&inode->lock); So ->last_trans is set to N and ->last_sub_trans set to 1. But before setting ->last_log_commit... 8) Task A is at btrfs_sync_log(): - it increments root->log_transid to 2 - starts writeback for all log tree extent buffers - waits for the writeback to complete - writes the super blocks - updates root->last_log_commit to 1 It's a lot of slow steps between updating root->log_transid and root->last_log_commit; 9) The task doing the ordered extent completion, currently at btrfs_set_inode_last_trans(), then finally runs: inode->last_log_commit = inode->root->last_log_commit; spin_unlock(&inode->lock); Which results in inode->last_log_commit being set to 1. The ordered extent completes; 10) Task B is resumed, and it calls btrfs_inode_in_log() which returns true because we have all the following conditions met: inode->logged_trans == N which matches fs_info->generation && inode->last_subtrans (1) <= inode->last_log_commit (1) && inode->last_subtrans (1) <= root->last_log_commit (1) && list inode->extent_tree.modified_extents is empty And as a consequence we return without logging the inode, so the existing logged version of the inode does not point to the extent that was written after the previous fsync. It should be impossible in practice for one task be able to do so much progress in btrfs_sync_log() while another task is at btrfs_set_inode_last_trans() right after it reads root->log_transid and before it reads root->last_log_commit. Even if kernel preemption is enabled we know the task at btrfs_set_inode_last_trans() can not be preempted because it is holding the inode's spinlock. However there is another place where we do the same without holding the spinlock, which is in the memory mapped write path at: vm_fault_t btrfs_page_mkwrite(struct vm_fault *vmf) { (...) BTRFS_I(inode)->last_trans = fs_info->generation; BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid; BTRFS_I(inode)->last_log_commit = BTRFS_I(inode)->root->last_log_commit; (...) So with preemption happening after setting ->last_sub_trans and before setting ->last_log_commit, it is less of a stretch to have another task do enough progress at btrfs_sync_log() such that the task doing the memory mapped write ends up with ->last_sub_trans and ->last_log_commit set to the same value. It is still a big stretch to get there, as the task doing btrfs_sync_log() has to start writeback, wait for its completion and write the super blocks. So fix this in two different ways: 1) For btrfs_set_inode_last_trans(), simply set ->last_log_commit to the value of ->last_sub_trans minus 1; 2) For btrfs_page_mkwrite() only set the inode's ->last_sub_trans, just like we do for buffered and direct writes at btrfs_file_write_iter(), which is all we need to make sure multiple writes and fsyncs to an inode in the same transaction never result in an fsync missing that the inode changed and needs to be logged. Turn this into a helper function and use it both at btrfs_page_mkwrite() and at btrfs_file_write_iter() - this also fixes the problem that at btrfs_page_mkwrite() we were setting those fields without the protection of the inode's spinlock. This is an extremely unlikely race to happen in practice. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-23 20:08:48 +08:00
inode->last_log_commit = inode->last_sub_trans - 1;
spin_unlock(&inode->lock);
}
/*
* Make qgroup codes to skip given qgroupid, means the old/new_roots for
* qgroup won't contain the qgroupid in it.
*/
static inline void btrfs_set_skip_qgroup(struct btrfs_trans_handle *trans,
u64 qgroupid)
{
struct btrfs_delayed_ref_root *delayed_refs;
delayed_refs = &trans->transaction->delayed_refs;
WARN_ON(delayed_refs->qgroup_to_skip);
delayed_refs->qgroup_to_skip = qgroupid;
}
static inline void btrfs_clear_skip_qgroup(struct btrfs_trans_handle *trans)
{
struct btrfs_delayed_ref_root *delayed_refs;
delayed_refs = &trans->transaction->delayed_refs;
WARN_ON(!delayed_refs->qgroup_to_skip);
delayed_refs->qgroup_to_skip = 0;
}
int btrfs_end_transaction(struct btrfs_trans_handle *trans);
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
unsigned int num_items);
struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv(
struct btrfs_root *root,
unsigned int num_items);
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root);
struct btrfs_trans_handle *btrfs_join_transaction_spacecache(struct btrfs_root *root);
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root);
struct btrfs_trans_handle *btrfs_attach_transaction(struct btrfs_root *root);
struct btrfs_trans_handle *btrfs_attach_transaction_barrier(
struct btrfs_root *root);
int btrfs_wait_for_commit(struct btrfs_fs_info *fs_info, u64 transid);
void btrfs_add_dead_root(struct btrfs_root *root);
int btrfs_defrag_root(struct btrfs_root *root);
int btrfs_clean_one_deleted_snapshot(struct btrfs_root *root);
int btrfs_commit_transaction(struct btrfs_trans_handle *trans);
int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans,
int wait_for_unblock);
int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans);
bool btrfs_should_end_transaction(struct btrfs_trans_handle *trans);
void btrfs_throttle(struct btrfs_fs_info *fs_info);
Btrfs: Mixed back reference (FORWARD ROLLING FORMAT CHANGE) This commit introduces a new kind of back reference for btrfs metadata. Once a filesystem has been mounted with this commit, IT WILL NO LONGER BE MOUNTABLE BY OLDER KERNELS. When a tree block in subvolume tree is cow'd, the reference counts of all extents it points to are increased by one. At transaction commit time, the old root of the subvolume is recorded in a "dead root" data structure, and the btree it points to is later walked, dropping reference counts and freeing any blocks where the reference count goes to 0. The increments done during cow and decrements done after commit cancel out, and the walk is a very expensive way to go about freeing the blocks that are no longer referenced by the new btree root. This commit reduces the transaction overhead by avoiding the need for dead root records. When a non-shared tree block is cow'd, we free the old block at once, and the new block inherits old block's references. When a tree block with reference count > 1 is cow'd, we increase the reference counts of all extents the new block points to by one, and decrease the old block's reference count by one. This dead tree avoidance code removes the need to modify the reference counts of lower level extents when a non-shared tree block is cow'd. But we still need to update back ref for all pointers in the block. This is because the location of the block is recorded in the back ref item. We can solve this by introducing a new type of back ref. The new back ref provides information about pointer's key, level and in which tree the pointer lives. This information allow us to find the pointer by searching the tree. The shortcoming of the new back ref is that it only works for pointers in tree blocks referenced by their owner trees. This is mostly a problem for snapshots, where resolving one of these fuzzy back references would be O(number_of_snapshots) and quite slow. The solution used here is to use the fuzzy back references in the common case where a given tree block is only referenced by one root, and use the full back references when multiple roots have a reference on a given block. This commit adds per subvolume red-black tree to keep trace of cached inodes. The red-black tree helps the balancing code to find cached inodes whose inode numbers within a given range. This commit improves the balancing code by introducing several data structures to keep the state of balancing. The most important one is the back ref cache. It caches how the upper level tree blocks are referenced. This greatly reduce the overhead of checking back ref. The improved balancing code scales significantly better with a large number of snapshots. This is a very large commit and was written in a number of pieces. But, they depend heavily on the disk format change and were squashed together to make sure git bisect didn't end up in a bad state wrt space balancing or the format change. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 22:45:14 +08:00
int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_write_marked_extents(struct btrfs_fs_info *fs_info,
struct extent_io_tree *dirty_pages, int mark);
int btrfs_wait_tree_log_extents(struct btrfs_root *root, int mark);
int btrfs_transaction_blocked(struct btrfs_fs_info *info);
int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
void btrfs_put_transaction(struct btrfs_transaction *transaction);
void btrfs_apply_pending_changes(struct btrfs_fs_info *fs_info);
void btrfs_add_dropped_root(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
void btrfs_trans_release_chunk_metadata(struct btrfs_trans_handle *trans);
#endif