linux/mm/kasan/init.c

505 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
/*
* This file contains KASAN shadow initialization code.
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
*
* Copyright (c) 2015 Samsung Electronics Co., Ltd.
* Author: Andrey Ryabinin <ryabinin.a.a@gmail.com>
*/
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/memblock.h>
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#include <linux/init.h>
#include <linux/kasan.h>
#include <linux/kernel.h>
#include <linux/mm.h>
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#include <linux/pfn.h>
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
#include <linux/slab.h>
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#include <asm/page.h>
#include <asm/pgalloc.h>
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
#include "kasan.h"
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
/*
* This page serves two purposes:
* - It used as early shadow memory. The entire shadow region populated
* with this page, before we will be able to setup normal shadow memory.
* - Latter it reused it as zero shadow to cover large ranges of memory
* that allowed to access, but not handled by kasan (vmalloc/vmemmap ...).
*/
unsigned char kasan_early_shadow_page[PAGE_SIZE] __page_aligned_bss;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#if CONFIG_PGTABLE_LEVELS > 4
p4d_t kasan_early_shadow_p4d[MAX_PTRS_PER_P4D] __page_aligned_bss;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static inline bool kasan_p4d_table(pgd_t pgd)
{
return pgd_page(pgd) == virt_to_page(lm_alias(kasan_early_shadow_p4d));
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
#else
static inline bool kasan_p4d_table(pgd_t pgd)
{
return false;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
#endif
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#if CONFIG_PGTABLE_LEVELS > 3
pud_t kasan_early_shadow_pud[MAX_PTRS_PER_PUD] __page_aligned_bss;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static inline bool kasan_pud_table(p4d_t p4d)
{
return p4d_page(p4d) == virt_to_page(lm_alias(kasan_early_shadow_pud));
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
#else
static inline bool kasan_pud_table(p4d_t p4d)
{
return false;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#endif
#if CONFIG_PGTABLE_LEVELS > 2
pmd_t kasan_early_shadow_pmd[MAX_PTRS_PER_PMD] __page_aligned_bss;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static inline bool kasan_pmd_table(pud_t pud)
{
return pud_page(pud) == virt_to_page(lm_alias(kasan_early_shadow_pmd));
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
#else
static inline bool kasan_pmd_table(pud_t pud)
{
return false;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
#endif
pte_t kasan_early_shadow_pte[MAX_PTRS_PER_PTE + PTE_HWTABLE_PTRS]
__page_aligned_bss;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static inline bool kasan_pte_table(pmd_t pmd)
{
return pmd_page(pmd) == virt_to_page(lm_alias(kasan_early_shadow_pte));
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
static inline bool kasan_early_shadow_page_entry(pte_t pte)
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
{
return pte_page(pte) == virt_to_page(lm_alias(kasan_early_shadow_page));
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
static __init void *early_alloc(size_t size, int node)
{
treewide: add checks for the return value of memblock_alloc*() Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 14:30:31 +08:00
void *ptr = memblock_alloc_try_nid(size, size, __pa(MAX_DMA_ADDRESS),
MEMBLOCK_ALLOC_ACCESSIBLE, node);
if (!ptr)
panic("%s: Failed to allocate %zu bytes align=%zx nid=%d from=%llx\n",
__func__, size, size, node, (u64)__pa(MAX_DMA_ADDRESS));
return ptr;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static void __ref zero_pte_populate(pmd_t *pmd, unsigned long addr,
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
unsigned long end)
{
pte_t *pte = pte_offset_kernel(pmd, addr);
pte_t zero_pte;
zero_pte = pfn_pte(PFN_DOWN(__pa_symbol(kasan_early_shadow_page)),
PAGE_KERNEL);
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
zero_pte = pte_wrprotect(zero_pte);
while (addr + PAGE_SIZE <= end) {
set_pte_at(&init_mm, addr, pte, zero_pte);
addr += PAGE_SIZE;
pte = pte_offset_kernel(pmd, addr);
}
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static int __ref zero_pmd_populate(pud_t *pud, unsigned long addr,
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
unsigned long end)
{
pmd_t *pmd = pmd_offset(pud, addr);
unsigned long next;
do {
next = pmd_addr_end(addr, end);
if (IS_ALIGNED(addr, PMD_SIZE) && end - addr >= PMD_SIZE) {
pmd_populate_kernel(&init_mm, pmd,
lm_alias(kasan_early_shadow_pte));
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
continue;
}
if (pmd_none(*pmd)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
pte_t *p;
if (slab_is_available())
mm: treewide: remove unused address argument from pte_alloc functions Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 07:28:34 +08:00
p = pte_alloc_one_kernel(&init_mm);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
else
p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
if (!p)
return -ENOMEM;
pmd_populate_kernel(&init_mm, pmd, p);
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}
zero_pte_populate(pmd, addr, next);
} while (pmd++, addr = next, addr != end);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return 0;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}
void __weak __meminit pmd_init(void *addr)
{
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static int __ref zero_pud_populate(p4d_t *p4d, unsigned long addr,
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
unsigned long end)
{
pud_t *pud = pud_offset(p4d, addr);
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
unsigned long next;
do {
next = pud_addr_end(addr, end);
if (IS_ALIGNED(addr, PUD_SIZE) && end - addr >= PUD_SIZE) {
pmd_t *pmd;
pud_populate(&init_mm, pud,
lm_alias(kasan_early_shadow_pmd));
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
pmd = pmd_offset(pud, addr);
pmd_populate_kernel(&init_mm, pmd,
lm_alias(kasan_early_shadow_pte));
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
continue;
}
if (pud_none(*pud)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
pmd_t *p;
if (slab_is_available()) {
p = pmd_alloc(&init_mm, pud, addr);
if (!p)
return -ENOMEM;
} else {
p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
pmd_init(p);
pud_populate(&init_mm, pud, p);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}
zero_pmd_populate(pud, addr, next);
} while (pud++, addr = next, addr != end);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return 0;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}
void __weak __meminit pud_init(void *addr)
{
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
static int __ref zero_p4d_populate(pgd_t *pgd, unsigned long addr,
unsigned long end)
{
p4d_t *p4d = p4d_offset(pgd, addr);
unsigned long next;
do {
next = p4d_addr_end(addr, end);
if (IS_ALIGNED(addr, P4D_SIZE) && end - addr >= P4D_SIZE) {
pud_t *pud;
pmd_t *pmd;
p4d_populate(&init_mm, p4d,
lm_alias(kasan_early_shadow_pud));
pud = pud_offset(p4d, addr);
pud_populate(&init_mm, pud,
lm_alias(kasan_early_shadow_pmd));
pmd = pmd_offset(pud, addr);
pmd_populate_kernel(&init_mm, pmd,
lm_alias(kasan_early_shadow_pte));
continue;
}
if (p4d_none(*p4d)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
pud_t *p;
if (slab_is_available()) {
p = pud_alloc(&init_mm, p4d, addr);
if (!p)
return -ENOMEM;
} else {
p = early_alloc(PAGE_SIZE, NUMA_NO_NODE);
pud_init(p);
p4d_populate(&init_mm, p4d, p);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
}
zero_pud_populate(p4d, addr, next);
} while (p4d++, addr = next, addr != end);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return 0;
}
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
/**
* kasan_populate_early_shadow - populate shadow memory region with
* kasan_early_shadow_page
* @shadow_start: start of the memory range to populate
* @shadow_end: end of the memory range to populate
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
*/
int __ref kasan_populate_early_shadow(const void *shadow_start,
const void *shadow_end)
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
{
unsigned long addr = (unsigned long)shadow_start;
unsigned long end = (unsigned long)shadow_end;
pgd_t *pgd = pgd_offset_k(addr);
unsigned long next;
do {
next = pgd_addr_end(addr, end);
if (IS_ALIGNED(addr, PGDIR_SIZE) && end - addr >= PGDIR_SIZE) {
p4d_t *p4d;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
pud_t *pud;
pmd_t *pmd;
/*
* kasan_early_shadow_pud should be populated with pmds
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
* at this moment.
* [pud,pmd]_populate*() below needed only for
* 3,2 - level page tables where we don't have
* puds,pmds, so pgd_populate(), pud_populate()
* is noops.
*/
pgd_populate(&init_mm, pgd,
lm_alias(kasan_early_shadow_p4d));
p4d = p4d_offset(pgd, addr);
p4d_populate(&init_mm, p4d,
lm_alias(kasan_early_shadow_pud));
pud = pud_offset(p4d, addr);
pud_populate(&init_mm, pud,
lm_alias(kasan_early_shadow_pmd));
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
pmd = pmd_offset(pud, addr);
pmd_populate_kernel(&init_mm, pmd,
lm_alias(kasan_early_shadow_pte));
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
continue;
}
if (pgd_none(*pgd)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
p4d_t *p;
if (slab_is_available()) {
p = p4d_alloc(&init_mm, pgd, addr);
if (!p)
return -ENOMEM;
} else {
pgd_populate(&init_mm, pgd,
early_alloc(PAGE_SIZE, NUMA_NO_NODE));
}
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}
zero_p4d_populate(pgd, addr, next);
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
} while (pgd++, addr = next, addr != end);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return 0;
}
static void kasan_free_pte(pte_t *pte_start, pmd_t *pmd)
{
pte_t *pte;
int i;
for (i = 0; i < PTRS_PER_PTE; i++) {
pte = pte_start + i;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
if (!pte_none(ptep_get(pte)))
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return;
}
pte_free_kernel(&init_mm, (pte_t *)page_to_virt(pmd_page(*pmd)));
pmd_clear(pmd);
}
static void kasan_free_pmd(pmd_t *pmd_start, pud_t *pud)
{
pmd_t *pmd;
int i;
for (i = 0; i < PTRS_PER_PMD; i++) {
pmd = pmd_start + i;
if (!pmd_none(*pmd))
return;
}
pmd_free(&init_mm, (pmd_t *)page_to_virt(pud_page(*pud)));
pud_clear(pud);
}
static void kasan_free_pud(pud_t *pud_start, p4d_t *p4d)
{
pud_t *pud;
int i;
for (i = 0; i < PTRS_PER_PUD; i++) {
pud = pud_start + i;
if (!pud_none(*pud))
return;
}
pud_free(&init_mm, (pud_t *)page_to_virt(p4d_page(*p4d)));
p4d_clear(p4d);
}
static void kasan_free_p4d(p4d_t *p4d_start, pgd_t *pgd)
{
p4d_t *p4d;
int i;
for (i = 0; i < PTRS_PER_P4D; i++) {
p4d = p4d_start + i;
if (!p4d_none(*p4d))
return;
}
p4d_free(&init_mm, (p4d_t *)page_to_virt(pgd_page(*pgd)));
pgd_clear(pgd);
}
static void kasan_remove_pte_table(pte_t *pte, unsigned long addr,
unsigned long end)
{
unsigned long next;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
pte_t ptent;
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
for (; addr < end; addr = next, pte++) {
next = (addr + PAGE_SIZE) & PAGE_MASK;
if (next > end)
next = end;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
ptent = ptep_get(pte);
if (!pte_present(ptent))
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
continue;
mm: ptep_get() conversion Convert all instances of direct pte_t* dereferencing to instead use ptep_get() helper. This means that by default, the accesses change from a C dereference to a READ_ONCE(). This is technically the correct thing to do since where pgtables are modified by HW (for access/dirty) they are volatile and therefore we should always ensure READ_ONCE() semantics. But more importantly, by always using the helper, it can be overridden by the architecture to fully encapsulate the contents of the pte. Arch code is deliberately not converted, as the arch code knows best. It is intended that arch code (arm64) will override the default with its own implementation that can (e.g.) hide certain bits from the core code, or determine young/dirty status by mixing in state from another source. Conversion was done using Coccinelle: ---- // $ make coccicheck \ // COCCI=ptepget.cocci \ // SPFLAGS="--include-headers" \ // MODE=patch virtual patch @ depends on patch @ pte_t *v; @@ - *v + ptep_get(v) ---- Then reviewed and hand-edited to avoid multiple unnecessary calls to ptep_get(), instead opting to store the result of a single call in a variable, where it is correct to do so. This aims to negate any cost of READ_ONCE() and will benefit arch-overrides that may be more complex. Included is a fix for an issue in an earlier version of this patch that was pointed out by kernel test robot. The issue arose because config MMU=n elides definition of the ptep helper functions, including ptep_get(). HUGETLB_PAGE=n configs still define a simple huge_ptep_clear_flush() for linking purposes, which dereferences the ptep. So when both configs are disabled, this caused a build error because ptep_get() is not defined. Fix by continuing to do a direct dereference when MMU=n. This is safe because for this config the arch code cannot be trying to virtualize the ptes because none of the ptep helpers are defined. Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/ Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dave Airlie <airlied@gmail.com> Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: SeongJae Park <sj@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-06-12 23:15:45 +08:00
if (WARN_ON(!kasan_early_shadow_page_entry(ptent)))
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
continue;
pte_clear(&init_mm, addr, pte);
}
}
static void kasan_remove_pmd_table(pmd_t *pmd, unsigned long addr,
unsigned long end)
{
unsigned long next;
for (; addr < end; addr = next, pmd++) {
pte_t *pte;
next = pmd_addr_end(addr, end);
if (!pmd_present(*pmd))
continue;
if (kasan_pte_table(*pmd)) {
if (IS_ALIGNED(addr, PMD_SIZE) &&
2021-01-24 13:01:25 +08:00
IS_ALIGNED(next, PMD_SIZE)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
pmd_clear(pmd);
2021-01-24 13:01:25 +08:00
continue;
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
pte = pte_offset_kernel(pmd, addr);
kasan_remove_pte_table(pte, addr, next);
kasan_free_pte(pte_offset_kernel(pmd, 0), pmd);
}
}
static void kasan_remove_pud_table(pud_t *pud, unsigned long addr,
unsigned long end)
{
unsigned long next;
for (; addr < end; addr = next, pud++) {
pmd_t *pmd, *pmd_base;
next = pud_addr_end(addr, end);
if (!pud_present(*pud))
continue;
if (kasan_pmd_table(*pud)) {
if (IS_ALIGNED(addr, PUD_SIZE) &&
2021-01-24 13:01:25 +08:00
IS_ALIGNED(next, PUD_SIZE)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
pud_clear(pud);
2021-01-24 13:01:25 +08:00
continue;
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
pmd = pmd_offset(pud, addr);
pmd_base = pmd_offset(pud, 0);
kasan_remove_pmd_table(pmd, addr, next);
kasan_free_pmd(pmd_base, pud);
}
}
static void kasan_remove_p4d_table(p4d_t *p4d, unsigned long addr,
unsigned long end)
{
unsigned long next;
for (; addr < end; addr = next, p4d++) {
pud_t *pud;
next = p4d_addr_end(addr, end);
if (!p4d_present(*p4d))
continue;
if (kasan_pud_table(*p4d)) {
if (IS_ALIGNED(addr, P4D_SIZE) &&
2021-01-24 13:01:25 +08:00
IS_ALIGNED(next, P4D_SIZE)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
p4d_clear(p4d);
2021-01-24 13:01:25 +08:00
continue;
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
pud = pud_offset(p4d, addr);
kasan_remove_pud_table(pud, addr, next);
kasan_free_pud(pud_offset(p4d, 0), p4d);
}
}
void kasan_remove_zero_shadow(void *start, unsigned long size)
{
unsigned long addr, end, next;
pgd_t *pgd;
addr = (unsigned long)kasan_mem_to_shadow(start);
end = addr + (size >> KASAN_SHADOW_SCALE_SHIFT);
if (WARN_ON((unsigned long)start % KASAN_MEMORY_PER_SHADOW_PAGE) ||
WARN_ON(size % KASAN_MEMORY_PER_SHADOW_PAGE))
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return;
for (; addr < end; addr = next) {
p4d_t *p4d;
next = pgd_addr_end(addr, end);
pgd = pgd_offset_k(addr);
if (!pgd_present(*pgd))
continue;
if (kasan_p4d_table(*pgd)) {
if (IS_ALIGNED(addr, PGDIR_SIZE) &&
2021-01-24 13:01:25 +08:00
IS_ALIGNED(next, PGDIR_SIZE)) {
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
pgd_clear(pgd);
2021-01-24 13:01:25 +08:00
continue;
}
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
}
p4d = p4d_offset(pgd, addr);
kasan_remove_p4d_table(p4d, addr, next);
kasan_free_p4d(p4d_offset(pgd, 0), pgd);
}
}
int kasan_add_zero_shadow(void *start, unsigned long size)
{
int ret;
void *shadow_start, *shadow_end;
shadow_start = kasan_mem_to_shadow(start);
shadow_end = shadow_start + (size >> KASAN_SHADOW_SCALE_SHIFT);
if (WARN_ON((unsigned long)start % KASAN_MEMORY_PER_SHADOW_PAGE) ||
WARN_ON(size % KASAN_MEMORY_PER_SHADOW_PAGE))
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return -EINVAL;
ret = kasan_populate_early_shadow(shadow_start, shadow_end);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
if (ret)
kasan_remove_zero_shadow(start, size);
kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-18 06:47:04 +08:00
return ret;
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow() Introduce generic kasan_populate_zero_shadow(shadow_start, shadow_end). This function maps kasan_zero_page to the [shadow_start, shadow_end] addresses. This replaces x86_64 specific populate_zero_shadow() and will be used for ARM64 in follow on patches. The main changes from original version are: * Use p?d_populate*() instead of set_p?d() * Use memblock allocator directly instead of vmemmap_alloc_block() * __pa() instead of __pa_nodebug(). __pa() causes troubles iff we use it before kasan_early_init(). kasan_populate_zero_shadow() will be used later, so we ok with __pa() here. Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Keitel <dkeitel@codeaurora.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Yury <yury.norov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1439444244-26057-3-git-send-email-ryabinin.a.a@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13 13:37:24 +08:00
}