korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-27 21:14:44 +08:00
Code Issues Packages Projects Releases Wiki Activity
1292c12959
linux/arch/arm/boot/dts/tegra20.dtsi

163 lines
3.2 KiB
Plaintext
Raw Normal View History

arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 07:26:54 +08:00
/include/ "skeleton.dtsi"
/ {
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
intc: interrupt-controller@50041000 {
compatible = "nvidia,tegra20-gic";
interrupt-controller;
#interrupt-cells = <1>;
reg = < 0x50041000 0x1000 >,
< 0x50040100 0x0100 >;
};
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C000 0x100>;
interrupts = < 70 >;
};
i2c@7000c400 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C400 0x100>;
interrupts = < 116 >;
};
i2c@7000c500 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000C500 0x100>;
interrupts = < 124 >;
};
i2c@7000d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "nvidia,tegra20-i2c";
reg = <0x7000D000 0x200>;
interrupts = < 85 >;
};
i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
dma-channel = < 2 >;
};
i2s@70002a00 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = < 35 >;
dma-channel = < 1 >;
};
das@70000c00 {
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
gpio: gpio@6000d000 {
compatible = "nvidia,tegra20-gpio";
reg = < 0x6000d000 0x1000 >;
interrupts = < 64 65 66 67 87 119 121 >;
#gpio-cells = <2>;
gpio-controller;
};
arm/dt: Tegra: Add pinmux node to tegra20.dtsi Add a pinmux node to tegra20.dtsi in order to instantiate the future pinmux device. v2: Specify reg property precisely; don't just point at the whole APB_MISC register range. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-12 06:16:13 +08:00
pinmux: pinmux@70000000 {
compatible = "nvidia,tegra20-pinmux";
reg = < 0x70000014 0x10 /* Tri-state registers */
0x70000080 0x20 /* Mux registers */
0x700000a0 0x14 /* Pull-up/down registers */
0x70000868 0xa8 >; /* Pad control registers */
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 07:26:54 +08:00
serial@70006000 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = < 68 >;
};
serial@70006040 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = < 69 >;
};
serial@70006200 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = < 78 >;
};
serial@70006300 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = < 122 >;
};
serial@70006400 {
compatible = "nvidia,tegra20-uart";
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = < 123 >;
};
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
interrupts = < 46 >;
};
sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = < 47 >;
};
sdhci@c8000400 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000400 0x200>;
interrupts = < 51 >;
};
sdhci@c8000600 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000600 0x200>;
interrupts = < 63 >;
};
arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 17:12:39 +08:00
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
interrupts = < 52 >;
phy_type = "utmi";
};
usb@c5004000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5004000 0x4000>;
interrupts = < 53 >;
phy_type = "ulpi";
};
usb@c5008000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5008000 0x4000>;
interrupts = < 129 >;
phy_type = "utmi";
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 07:26:54 +08:00
};
Reference in New Issue Copy Permalink