linux/drivers/auxdisplay/hd44780.c

326 lines
7.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* HD44780 Character LCD driver for Linux
*
* Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu>
* Copyright (C) 2016-2017 Glider bvba
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/slab.h>
#include "charlcd.h"
#include "hd44780_common.h"
enum hd44780_pin {
/* Order does matter due to writing to GPIO array subsets! */
PIN_DATA0, /* Optional */
PIN_DATA1, /* Optional */
PIN_DATA2, /* Optional */
PIN_DATA3, /* Optional */
PIN_DATA4,
PIN_DATA5,
PIN_DATA6,
PIN_DATA7,
PIN_CTRL_RS,
PIN_CTRL_RW, /* Optional */
PIN_CTRL_E,
PIN_CTRL_BL, /* Optional */
PIN_NUM
};
struct hd44780 {
struct gpio_desc *pins[PIN_NUM];
};
static void hd44780_backlight(struct charlcd *lcd, enum charlcd_onoff on)
{
struct hd44780_common *hdc = lcd->drvdata;
struct hd44780 *hd = hdc->hd44780;
if (hd->pins[PIN_CTRL_BL])
gpiod_set_value_cansleep(hd->pins[PIN_CTRL_BL], on);
}
static void hd44780_strobe_gpio(struct hd44780 *hd)
{
/* Maintain the data during 20 us before the strobe */
udelay(20);
gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 1);
/* Maintain the strobe during 40 us */
udelay(40);
gpiod_set_value_cansleep(hd->pins[PIN_CTRL_E], 0);
}
/* write to an LCD panel register in 8 bit GPIO mode */
static void hd44780_write_gpio8(struct hd44780 *hd, u8 val, unsigned int rs)
{
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
DECLARE_BITMAP(values, 10); /* for DATA[0-7], RS, RW */
unsigned int n;
values[0] = val;
__assign_bit(8, values, rs);
n = hd->pins[PIN_CTRL_RW] ? 10 : 9;
/* Present the data to the port */
gpiolib: Pass array info to get/set array functions In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:07 +08:00
gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA0], NULL, values);
hd44780_strobe_gpio(hd);
}
/* write to an LCD panel register in 4 bit GPIO mode */
static void hd44780_write_gpio4(struct hd44780 *hd, u8 val, unsigned int rs)
{
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */
unsigned int n;
/* High nibble + RS, RW */
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
values[0] = val >> 4;
__assign_bit(4, values, rs);
n = hd->pins[PIN_CTRL_RW] ? 6 : 5;
/* Present the data to the port */
gpiolib: Pass array info to get/set array functions In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:07 +08:00
gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values);
hd44780_strobe_gpio(hd);
/* Low nibble */
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
values[0] &= ~0x0fUL;
values[0] |= val & 0x0f;
/* Present the data to the port */
gpiolib: Pass array info to get/set array functions In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:07 +08:00
gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values);
hd44780_strobe_gpio(hd);
}
/* Send a command to the LCD panel in 8 bit GPIO mode */
static void hd44780_write_cmd_gpio8(struct hd44780_common *hdc, int cmd)
{
struct hd44780 *hd = hdc->hd44780;
hd44780_write_gpio8(hd, cmd, 0);
/* The shortest command takes at least 120 us */
udelay(120);
}
/* Send data to the LCD panel in 8 bit GPIO mode */
static void hd44780_write_data_gpio8(struct hd44780_common *hdc, int data)
{
struct hd44780 *hd = hdc->hd44780;
hd44780_write_gpio8(hd, data, 1);
/* The shortest data takes at least 45 us */
udelay(45);
}
static const struct charlcd_ops hd44780_ops_gpio8 = {
.backlight = hd44780_backlight,
};
/* Send a command to the LCD panel in 4 bit GPIO mode */
static void hd44780_write_cmd_gpio4(struct hd44780_common *hdc, int cmd)
{
struct hd44780 *hd = hdc->hd44780;
hd44780_write_gpio4(hd, cmd, 0);
/* The shortest command takes at least 120 us */
udelay(120);
}
/* Send 4-bits of a command to the LCD panel in raw 4 bit GPIO mode */
static void hd44780_write_cmd_raw_gpio4(struct hd44780_common *hdc, int cmd)
{
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
DECLARE_BITMAP(values, 6); /* for DATA[4-7], RS, RW */
struct hd44780 *hd = hdc->hd44780;
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
unsigned int n;
/* Command nibble + RS, RW */
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
values[0] = cmd & 0x0f;
n = hd->pins[PIN_CTRL_RW] ? 6 : 5;
/* Present the data to the port */
gpiolib: Pass array info to get/set array functions In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:07 +08:00
gpiod_set_array_value_cansleep(n, &hd->pins[PIN_DATA4], NULL, values);
hd44780_strobe_gpio(hd);
}
/* Send data to the LCD panel in 4 bit GPIO mode */
static void hd44780_write_data_gpio4(struct hd44780_common *hdc, int data)
{
struct hd44780 *hd = hdc->hd44780;
hd44780_write_gpio4(hd, data, 1);
/* The shortest data takes at least 45 us */
udelay(45);
}
static const struct charlcd_ops hd44780_ops_gpio4 = {
.backlight = hd44780_backlight,
};
static int hd44780_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int i, base;
struct charlcd *lcd;
struct hd44780_common *hdc;
struct hd44780 *hd;
int ifwidth, ret = -ENOMEM;
/* Required pins */
ifwidth = gpiod_count(dev, "data");
if (ifwidth < 0)
return ifwidth;
switch (ifwidth) {
case 4:
base = PIN_DATA4;
break;
case 8:
base = PIN_DATA0;
break;
default:
return -EINVAL;
}
hdc = hd44780_common_alloc();
if (!hdc)
return -ENOMEM;
lcd = charlcd_alloc();
if (!lcd)
goto fail1;
hd = kzalloc(sizeof(struct hd44780), GFP_KERNEL);
if (!hd)
goto fail2;
hdc->hd44780 = hd;
lcd->drvdata = hdc;
for (i = 0; i < ifwidth; i++) {
hd->pins[base + i] = devm_gpiod_get_index(dev, "data", i,
GPIOD_OUT_LOW);
if (IS_ERR(hd->pins[base + i])) {
ret = PTR_ERR(hd->pins[base + i]);
goto fail3;
}
}
hd->pins[PIN_CTRL_E] = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
if (IS_ERR(hd->pins[PIN_CTRL_E])) {
ret = PTR_ERR(hd->pins[PIN_CTRL_E]);
goto fail3;
}
hd->pins[PIN_CTRL_RS] = devm_gpiod_get(dev, "rs", GPIOD_OUT_HIGH);
if (IS_ERR(hd->pins[PIN_CTRL_RS])) {
ret = PTR_ERR(hd->pins[PIN_CTRL_RS]);
goto fail3;
}
/* Optional pins */
hd->pins[PIN_CTRL_RW] = devm_gpiod_get_optional(dev, "rw",
GPIOD_OUT_LOW);
if (IS_ERR(hd->pins[PIN_CTRL_RW])) {
ret = PTR_ERR(hd->pins[PIN_CTRL_RW]);
goto fail3;
}
hd->pins[PIN_CTRL_BL] = devm_gpiod_get_optional(dev, "backlight",
GPIOD_OUT_LOW);
if (IS_ERR(hd->pins[PIN_CTRL_BL])) {
ret = PTR_ERR(hd->pins[PIN_CTRL_BL]);
goto fail3;
}
/* Required properties */
ret = device_property_read_u32(dev, "display-height-chars",
&lcd->height);
if (ret)
goto fail3;
ret = device_property_read_u32(dev, "display-width-chars", &lcd->width);
if (ret)
goto fail3;
/*
* On displays with more than two rows, the internal buffer width is
* usually equal to the display width
*/
if (lcd->height > 2)
hdc->bwidth = lcd->width;
/* Optional properties */
device_property_read_u32(dev, "internal-buffer-width", &hdc->bwidth);
hdc->ifwidth = ifwidth;
if (ifwidth == 8) {
lcd->ops = &hd44780_ops_gpio8;
hdc->write_data = hd44780_write_data_gpio8;
hdc->write_cmd = hd44780_write_cmd_gpio8;
} else {
lcd->ops = &hd44780_ops_gpio4;
hdc->write_data = hd44780_write_data_gpio4;
hdc->write_cmd = hd44780_write_cmd_gpio4;
hdc->write_cmd_raw4 = hd44780_write_cmd_raw_gpio4;
}
ret = charlcd_register(lcd);
if (ret)
goto fail3;
platform_set_drvdata(pdev, lcd);
return 0;
fail3:
kfree(hd);
fail2:
kfree(lcd);
fail1:
kfree(hdc);
return ret;
}
static int hd44780_remove(struct platform_device *pdev)
{
struct charlcd *lcd = platform_get_drvdata(pdev);
kfree(lcd->drvdata);
charlcd_unregister(lcd);
kfree(lcd);
return 0;
}
static const struct of_device_id hd44780_of_match[] = {
{ .compatible = "hit,hd44780" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, hd44780_of_match);
static struct platform_driver hd44780_driver = {
.probe = hd44780_probe,
.remove = hd44780_remove,
.driver = {
.name = "hd44780",
.of_match_table = hd44780_of_match,
},
};
module_platform_driver(hd44780_driver);
MODULE_DESCRIPTION("HD44780 Character LCD driver");
MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>");
MODULE_LICENSE("GPL");