2013-06-11 04:16:22 +08:00
|
|
|
/*
|
|
|
|
* Pinctrl driver for Rockchip SoCs
|
|
|
|
*
|
|
|
|
* Copyright (c) 2013 MundoReader S.L.
|
|
|
|
* Author: Heiko Stuebner <heiko@sntech.de>
|
|
|
|
*
|
|
|
|
* With some ideas taken from pinctrl-samsung:
|
|
|
|
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
|
|
|
* http://www.samsung.com
|
|
|
|
* Copyright (c) 2012 Linaro Ltd
|
|
|
|
* http://www.linaro.org
|
|
|
|
*
|
|
|
|
* and pinctrl-at91:
|
|
|
|
* Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as published
|
|
|
|
* by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
2016-08-24 05:19:42 +08:00
|
|
|
#include <linux/init.h>
|
2013-06-11 04:16:22 +08:00
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_irq.h>
|
|
|
|
#include <linux/pinctrl/machine.h>
|
|
|
|
#include <linux/pinctrl/pinconf.h>
|
|
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
|
|
#include <linux/pinctrl/pinmux.h>
|
|
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include <linux/irqchip/chained_irq.h>
|
2013-07-23 19:34:20 +08:00
|
|
|
#include <linux/clk.h>
|
2014-05-05 19:58:20 +08:00
|
|
|
#include <linux/regmap.h>
|
2014-05-05 19:59:09 +08:00
|
|
|
#include <linux/mfd/syscon.h>
|
2013-06-11 04:16:22 +08:00
|
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
|
|
|
|
|
#include "core.h"
|
|
|
|
#include "pinconf.h"
|
|
|
|
|
|
|
|
/* GPIO control registers */
|
|
|
|
#define GPIO_SWPORT_DR 0x00
|
|
|
|
#define GPIO_SWPORT_DDR 0x04
|
|
|
|
#define GPIO_INTEN 0x30
|
|
|
|
#define GPIO_INTMASK 0x34
|
|
|
|
#define GPIO_INTTYPE_LEVEL 0x38
|
|
|
|
#define GPIO_INT_POLARITY 0x3c
|
|
|
|
#define GPIO_INT_STATUS 0x40
|
|
|
|
#define GPIO_INT_RAWSTATUS 0x44
|
|
|
|
#define GPIO_DEBOUNCE 0x48
|
|
|
|
#define GPIO_PORTS_EOI 0x4c
|
|
|
|
#define GPIO_EXT_PORT 0x50
|
|
|
|
#define GPIO_LS_SYNC 0x60
|
|
|
|
|
2013-10-16 07:07:20 +08:00
|
|
|
enum rockchip_pinctrl_type {
|
2017-03-18 01:18:36 +08:00
|
|
|
RV1108,
|
2013-10-16 07:07:20 +08:00
|
|
|
RK2928,
|
|
|
|
RK3066B,
|
2017-07-21 14:27:15 +08:00
|
|
|
RK3128,
|
2013-10-16 07:07:20 +08:00
|
|
|
RK3188,
|
2014-07-20 07:49:17 +08:00
|
|
|
RK3288,
|
2015-06-13 05:51:01 +08:00
|
|
|
RK3368,
|
2016-02-01 10:58:21 +08:00
|
|
|
RK3399,
|
2013-10-16 07:07:20 +08:00
|
|
|
};
|
|
|
|
|
2014-06-16 07:36:05 +08:00
|
|
|
/**
|
|
|
|
* Encode variants of iomux registers into a type variable
|
|
|
|
*/
|
|
|
|
#define IOMUX_GPIO_ONLY BIT(0)
|
2014-06-16 07:36:57 +08:00
|
|
|
#define IOMUX_WIDTH_4BIT BIT(1)
|
2014-06-16 07:37:23 +08:00
|
|
|
#define IOMUX_SOURCE_PMU BIT(2)
|
2014-06-16 07:37:49 +08:00
|
|
|
#define IOMUX_UNROUTED BIT(3)
|
2017-02-10 18:23:47 +08:00
|
|
|
#define IOMUX_WIDTH_3BIT BIT(4)
|
2014-06-16 07:36:05 +08:00
|
|
|
|
|
|
|
/**
|
|
|
|
* @type: iomux variant using IOMUX_* constants
|
2014-06-16 07:36:33 +08:00
|
|
|
* @offset: if initialized to -1 it will be autocalculated, by specifying
|
|
|
|
* an initial offset value the relevant source offset can be reset
|
|
|
|
* to a new value for autocalculating the following iomux registers.
|
2014-06-16 07:36:05 +08:00
|
|
|
*/
|
|
|
|
struct rockchip_iomux {
|
|
|
|
int type;
|
2014-06-16 07:36:33 +08:00
|
|
|
int offset;
|
2013-10-16 07:07:49 +08:00
|
|
|
};
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
/**
|
|
|
|
* enum type index corresponding to rockchip_perpin_drv_list arrays index.
|
|
|
|
*/
|
|
|
|
enum rockchip_pin_drv_type {
|
|
|
|
DRV_TYPE_IO_DEFAULT = 0,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_ONLY,
|
|
|
|
DRV_TYPE_IO_1V8_3V0_AUTO,
|
|
|
|
DRV_TYPE_IO_3V3_ONLY,
|
|
|
|
DRV_TYPE_MAX
|
|
|
|
};
|
|
|
|
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
/**
|
|
|
|
* enum type index corresponding to rockchip_pull_list arrays index.
|
|
|
|
*/
|
|
|
|
enum rockchip_pin_pull_type {
|
|
|
|
PULL_TYPE_IO_DEFAULT = 0,
|
|
|
|
PULL_TYPE_IO_1V8_ONLY,
|
|
|
|
PULL_TYPE_MAX
|
|
|
|
};
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
/**
|
|
|
|
* @drv_type: drive strength variant using rockchip_perpin_drv_type
|
|
|
|
* @offset: if initialized to -1 it will be autocalculated, by specifying
|
|
|
|
* an initial offset value the relevant source offset can be reset
|
|
|
|
* to a new value for autocalculating the following drive strength
|
|
|
|
* registers. if used chips own cal_drv func instead to calculate
|
|
|
|
* registers offset, the variant could be ignored.
|
|
|
|
*/
|
|
|
|
struct rockchip_drv {
|
|
|
|
enum rockchip_pin_drv_type drv_type;
|
|
|
|
int offset;
|
|
|
|
};
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/**
|
|
|
|
* @reg_base: register base of the gpio bank
|
2013-10-16 07:08:42 +08:00
|
|
|
* @reg_pull: optional separate register for additional pull settings
|
2013-06-11 04:16:22 +08:00
|
|
|
* @clk: clock of the gpio bank
|
|
|
|
* @irq: interrupt of the gpio bank
|
2015-01-27 00:24:03 +08:00
|
|
|
* @saved_masks: Saved content of GPIO_INTEN at suspend time.
|
2013-06-11 04:16:22 +08:00
|
|
|
* @pin_base: first pin number
|
|
|
|
* @nr_pins: number of pins in this bank
|
|
|
|
* @name: name of the bank
|
|
|
|
* @bank_num: number of the bank, to account for holes
|
2014-06-16 07:36:05 +08:00
|
|
|
* @iomux: array describing the 4 iomux sources of the bank
|
2016-02-01 10:58:21 +08:00
|
|
|
* @drv: array describing the 4 drive strength sources of the bank
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
* @pull_type: array describing the 4 pull type sources of the bank
|
2013-06-11 04:16:22 +08:00
|
|
|
* @valid: are all necessary informations present
|
|
|
|
* @of_node: dt node of this bank
|
|
|
|
* @drvdata: common pinctrl basedata
|
|
|
|
* @domain: irqdomain of the gpio bank
|
|
|
|
* @gpio_chip: gpiolib chip
|
|
|
|
* @grange: gpio range
|
|
|
|
* @slock: spinlock for the gpio bank
|
2017-05-26 15:20:20 +08:00
|
|
|
* @route_mask: bits describing the routing pins of per bank
|
2013-06-11 04:16:22 +08:00
|
|
|
*/
|
|
|
|
struct rockchip_pin_bank {
|
|
|
|
void __iomem *reg_base;
|
2014-05-05 19:58:20 +08:00
|
|
|
struct regmap *regmap_pull;
|
2013-06-11 04:16:22 +08:00
|
|
|
struct clk *clk;
|
|
|
|
int irq;
|
2015-01-27 00:24:03 +08:00
|
|
|
u32 saved_masks;
|
2013-06-11 04:16:22 +08:00
|
|
|
u32 pin_base;
|
|
|
|
u8 nr_pins;
|
|
|
|
char *name;
|
|
|
|
u8 bank_num;
|
2014-06-16 07:36:05 +08:00
|
|
|
struct rockchip_iomux iomux[4];
|
2016-02-01 10:58:21 +08:00
|
|
|
struct rockchip_drv drv[4];
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
enum rockchip_pin_pull_type pull_type[4];
|
2013-06-11 04:16:22 +08:00
|
|
|
bool valid;
|
|
|
|
struct device_node *of_node;
|
|
|
|
struct rockchip_pinctrl *drvdata;
|
|
|
|
struct irq_domain *domain;
|
|
|
|
struct gpio_chip gpio_chip;
|
|
|
|
struct pinctrl_gpio_range grange;
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spinlock_t slock;
|
2013-10-16 07:09:08 +08:00
|
|
|
u32 toggle_edge_mode;
|
2017-07-21 14:27:14 +08:00
|
|
|
u32 recalced_mask;
|
2017-05-26 15:20:20 +08:00
|
|
|
u32 route_mask;
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define PIN_BANK(id, pins, label) \
|
|
|
|
{ \
|
|
|
|
.bank_num = id, \
|
|
|
|
.nr_pins = pins, \
|
|
|
|
.name = label, \
|
2014-06-16 07:36:33 +08:00
|
|
|
.iomux = { \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
}, \
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2014-06-16 07:36:05 +08:00
|
|
|
#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \
|
|
|
|
{ \
|
|
|
|
.bank_num = id, \
|
|
|
|
.nr_pins = pins, \
|
|
|
|
.name = label, \
|
|
|
|
.iomux = { \
|
2014-06-16 07:36:33 +08:00
|
|
|
{ .type = iom0, .offset = -1 }, \
|
|
|
|
{ .type = iom1, .offset = -1 }, \
|
|
|
|
{ .type = iom2, .offset = -1 }, \
|
|
|
|
{ .type = iom3, .offset = -1 }, \
|
2014-06-16 07:36:05 +08:00
|
|
|
}, \
|
|
|
|
}
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
#define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \
|
|
|
|
{ \
|
|
|
|
.bank_num = id, \
|
|
|
|
.nr_pins = pins, \
|
|
|
|
.name = label, \
|
|
|
|
.iomux = { \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
}, \
|
|
|
|
.drv = { \
|
|
|
|
{ .drv_type = type0, .offset = -1 }, \
|
|
|
|
{ .drv_type = type1, .offset = -1 }, \
|
|
|
|
{ .drv_type = type2, .offset = -1 }, \
|
|
|
|
{ .drv_type = type3, .offset = -1 }, \
|
|
|
|
}, \
|
|
|
|
}
|
|
|
|
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
#define PIN_BANK_DRV_FLAGS_PULL_FLAGS(id, pins, label, drv0, drv1, \
|
|
|
|
drv2, drv3, pull0, pull1, \
|
|
|
|
pull2, pull3) \
|
|
|
|
{ \
|
|
|
|
.bank_num = id, \
|
|
|
|
.nr_pins = pins, \
|
|
|
|
.name = label, \
|
|
|
|
.iomux = { \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
{ .offset = -1 }, \
|
|
|
|
}, \
|
|
|
|
.drv = { \
|
|
|
|
{ .drv_type = drv0, .offset = -1 }, \
|
|
|
|
{ .drv_type = drv1, .offset = -1 }, \
|
|
|
|
{ .drv_type = drv2, .offset = -1 }, \
|
|
|
|
{ .drv_type = drv3, .offset = -1 }, \
|
|
|
|
}, \
|
|
|
|
.pull_type[0] = pull0, \
|
|
|
|
.pull_type[1] = pull1, \
|
|
|
|
.pull_type[2] = pull2, \
|
|
|
|
.pull_type[3] = pull3, \
|
|
|
|
}
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
#define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \
|
|
|
|
iom2, iom3, drv0, drv1, drv2, \
|
|
|
|
drv3, offset0, offset1, \
|
|
|
|
offset2, offset3) \
|
|
|
|
{ \
|
|
|
|
.bank_num = id, \
|
|
|
|
.nr_pins = pins, \
|
|
|
|
.name = label, \
|
|
|
|
.iomux = { \
|
|
|
|
{ .type = iom0, .offset = -1 }, \
|
|
|
|
{ .type = iom1, .offset = -1 }, \
|
|
|
|
{ .type = iom2, .offset = -1 }, \
|
|
|
|
{ .type = iom3, .offset = -1 }, \
|
|
|
|
}, \
|
|
|
|
.drv = { \
|
|
|
|
{ .drv_type = drv0, .offset = offset0 }, \
|
|
|
|
{ .drv_type = drv1, .offset = offset1 }, \
|
|
|
|
{ .drv_type = drv2, .offset = offset2 }, \
|
|
|
|
{ .drv_type = drv3, .offset = offset3 }, \
|
|
|
|
}, \
|
|
|
|
}
|
|
|
|
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
#define PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(id, pins, \
|
|
|
|
label, iom0, iom1, iom2, \
|
|
|
|
iom3, drv0, drv1, drv2, \
|
|
|
|
drv3, offset0, offset1, \
|
|
|
|
offset2, offset3, pull0, \
|
|
|
|
pull1, pull2, pull3) \
|
|
|
|
{ \
|
|
|
|
.bank_num = id, \
|
|
|
|
.nr_pins = pins, \
|
|
|
|
.name = label, \
|
|
|
|
.iomux = { \
|
|
|
|
{ .type = iom0, .offset = -1 }, \
|
|
|
|
{ .type = iom1, .offset = -1 }, \
|
|
|
|
{ .type = iom2, .offset = -1 }, \
|
|
|
|
{ .type = iom3, .offset = -1 }, \
|
|
|
|
}, \
|
|
|
|
.drv = { \
|
|
|
|
{ .drv_type = drv0, .offset = offset0 }, \
|
|
|
|
{ .drv_type = drv1, .offset = offset1 }, \
|
|
|
|
{ .drv_type = drv2, .offset = offset2 }, \
|
|
|
|
{ .drv_type = drv3, .offset = offset3 }, \
|
|
|
|
}, \
|
|
|
|
.pull_type[0] = pull0, \
|
|
|
|
.pull_type[1] = pull1, \
|
|
|
|
.pull_type[2] = pull2, \
|
|
|
|
.pull_type[3] = pull3, \
|
|
|
|
}
|
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
/**
|
|
|
|
* struct rockchip_mux_recalced_data: represent a pin iomux data.
|
|
|
|
* @num: bank number.
|
|
|
|
* @pin: pin number.
|
|
|
|
* @bit: index at register.
|
|
|
|
* @reg: register offset.
|
|
|
|
* @mask: mask bit
|
|
|
|
*/
|
|
|
|
struct rockchip_mux_recalced_data {
|
|
|
|
u8 num;
|
|
|
|
u8 pin;
|
2017-08-23 16:00:07 +08:00
|
|
|
u32 reg;
|
2017-07-21 14:27:14 +08:00
|
|
|
u8 bit;
|
|
|
|
u8 mask;
|
|
|
|
};
|
|
|
|
|
2017-05-26 15:20:20 +08:00
|
|
|
/**
|
|
|
|
* struct rockchip_mux_recalced_data: represent a pin iomux data.
|
|
|
|
* @bank_num: bank number.
|
|
|
|
* @pin: index at register or used to calc index.
|
|
|
|
* @func: the min pin.
|
|
|
|
* @route_offset: the max pin.
|
|
|
|
* @route_val: the register offset.
|
|
|
|
*/
|
|
|
|
struct rockchip_mux_route_data {
|
|
|
|
u8 bank_num;
|
|
|
|
u8 pin;
|
|
|
|
u8 func;
|
|
|
|
u32 route_offset;
|
|
|
|
u32 route_val;
|
|
|
|
};
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/**
|
|
|
|
*/
|
|
|
|
struct rockchip_pin_ctrl {
|
|
|
|
struct rockchip_pin_bank *pin_banks;
|
|
|
|
u32 nr_banks;
|
|
|
|
u32 nr_pins;
|
|
|
|
char *label;
|
2013-10-16 07:07:20 +08:00
|
|
|
enum rockchip_pinctrl_type type;
|
2014-06-16 07:37:23 +08:00
|
|
|
int grf_mux_offset;
|
|
|
|
int pmu_mux_offset;
|
2016-02-01 10:58:21 +08:00
|
|
|
int grf_drv_offset;
|
|
|
|
int pmu_drv_offset;
|
2017-07-21 14:27:14 +08:00
|
|
|
struct rockchip_mux_recalced_data *iomux_recalced;
|
|
|
|
u32 niomux_recalced;
|
2017-05-26 15:20:20 +08:00
|
|
|
struct rockchip_mux_route_data *iomux_routes;
|
|
|
|
u32 niomux_routes;
|
2016-02-01 10:58:21 +08:00
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
void (*pull_calc_reg)(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit);
|
2015-06-13 05:50:11 +08:00
|
|
|
void (*drv_calc_reg)(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit);
|
2017-03-02 15:11:23 +08:00
|
|
|
int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit);
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct rockchip_pin_config {
|
|
|
|
unsigned int func;
|
|
|
|
unsigned long *configs;
|
|
|
|
unsigned int nconfigs;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct rockchip_pin_group: represent group of pins of a pinmux function.
|
|
|
|
* @name: name of the pin group, used to lookup the group.
|
|
|
|
* @pins: the pins included in this group.
|
|
|
|
* @npins: number of pins included in this group.
|
|
|
|
* @func: the mux function number to be programmed when selected.
|
|
|
|
* @configs: the config values to be set for each pin
|
|
|
|
* @nconfigs: number of configs for each pin
|
|
|
|
*/
|
|
|
|
struct rockchip_pin_group {
|
|
|
|
const char *name;
|
|
|
|
unsigned int npins;
|
|
|
|
unsigned int *pins;
|
|
|
|
struct rockchip_pin_config *data;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct rockchip_pmx_func: represent a pin function.
|
|
|
|
* @name: name of the pin function, used to lookup the function.
|
|
|
|
* @groups: one or more names of pin groups that provide this function.
|
|
|
|
* @num_groups: number of groups included in @groups.
|
|
|
|
*/
|
|
|
|
struct rockchip_pmx_func {
|
|
|
|
const char *name;
|
|
|
|
const char **groups;
|
|
|
|
u8 ngroups;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct rockchip_pinctrl {
|
2014-05-05 19:58:20 +08:00
|
|
|
struct regmap *regmap_base;
|
2014-05-05 19:58:00 +08:00
|
|
|
int reg_size;
|
2014-05-05 19:58:20 +08:00
|
|
|
struct regmap *regmap_pull;
|
2014-05-05 19:59:09 +08:00
|
|
|
struct regmap *regmap_pmu;
|
2013-06-11 04:16:22 +08:00
|
|
|
struct device *dev;
|
|
|
|
struct rockchip_pin_ctrl *ctrl;
|
|
|
|
struct pinctrl_desc pctl;
|
|
|
|
struct pinctrl_dev *pctl_dev;
|
|
|
|
struct rockchip_pin_group *groups;
|
|
|
|
unsigned int ngroups;
|
|
|
|
struct rockchip_pmx_func *functions;
|
|
|
|
unsigned int nfunctions;
|
|
|
|
};
|
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
static struct regmap_config rockchip_regmap_config = {
|
|
|
|
.reg_bits = 32,
|
|
|
|
.val_bits = 32,
|
|
|
|
.reg_stride = 4,
|
|
|
|
};
|
|
|
|
|
2016-06-13 23:18:34 +08:00
|
|
|
static inline const struct rockchip_pin_group *pinctrl_name_to_group(
|
2013-06-11 04:16:22 +08:00
|
|
|
const struct rockchip_pinctrl *info,
|
|
|
|
const char *name)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < info->ngroups; i++) {
|
2013-08-21 10:28:50 +08:00
|
|
|
if (!strcmp(info->groups[i].name, name))
|
|
|
|
return &info->groups[i];
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2013-08-21 10:28:50 +08:00
|
|
|
return NULL;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* given a pin number that is local to a pin controller, find out the pin bank
|
|
|
|
* and the register base of the pin bank.
|
|
|
|
*/
|
|
|
|
static struct rockchip_pin_bank *pin_to_bank(struct rockchip_pinctrl *info,
|
|
|
|
unsigned pin)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_bank *b = info->ctrl->pin_banks;
|
|
|
|
|
2013-08-23 15:49:00 +08:00
|
|
|
while (pin >= (b->pin_base + b->nr_pins))
|
2013-06-11 04:16:22 +08:00
|
|
|
b++;
|
|
|
|
|
|
|
|
return b;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct rockchip_pin_bank *bank_num_to_bank(
|
|
|
|
struct rockchip_pinctrl *info,
|
|
|
|
unsigned num)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_bank *b = info->ctrl->pin_banks;
|
|
|
|
int i;
|
|
|
|
|
2013-08-21 10:28:50 +08:00
|
|
|
for (i = 0; i < info->ctrl->nr_banks; i++, b++) {
|
2013-06-11 04:16:22 +08:00
|
|
|
if (b->bank_num == num)
|
2013-08-21 10:28:50 +08:00
|
|
|
return b;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2013-08-21 10:28:50 +08:00
|
|
|
return ERR_PTR(-EINVAL);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Pinctrl_ops handling
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int rockchip_get_groups_count(struct pinctrl_dev *pctldev)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
|
|
|
|
return info->ngroups;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const char *rockchip_get_group_name(struct pinctrl_dev *pctldev,
|
|
|
|
unsigned selector)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
|
|
|
|
return info->groups[selector].name;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_get_group_pins(struct pinctrl_dev *pctldev,
|
|
|
|
unsigned selector, const unsigned **pins,
|
|
|
|
unsigned *npins)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
|
|
|
|
if (selector >= info->ngroups)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
*pins = info->groups[selector].pins;
|
|
|
|
*npins = info->groups[selector].npins;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
|
|
struct device_node *np,
|
|
|
|
struct pinctrl_map **map, unsigned *num_maps)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
const struct rockchip_pin_group *grp;
|
|
|
|
struct pinctrl_map *new_map;
|
|
|
|
struct device_node *parent;
|
|
|
|
int map_num = 1;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* first find the group of this node and check if we need to create
|
|
|
|
* config maps for pins
|
|
|
|
*/
|
|
|
|
grp = pinctrl_name_to_group(info, np->name);
|
|
|
|
if (!grp) {
|
|
|
|
dev_err(info->dev, "unable to find group for node %s\n",
|
|
|
|
np->name);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
map_num += grp->npins;
|
|
|
|
new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num,
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!new_map)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
*map = new_map;
|
|
|
|
*num_maps = map_num;
|
|
|
|
|
|
|
|
/* create mux map */
|
|
|
|
parent = of_get_parent(np);
|
|
|
|
if (!parent) {
|
|
|
|
devm_kfree(pctldev->dev, new_map);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
|
|
|
|
new_map[0].data.mux.function = parent->name;
|
|
|
|
new_map[0].data.mux.group = np->name;
|
|
|
|
of_node_put(parent);
|
|
|
|
|
|
|
|
/* create config map */
|
|
|
|
new_map++;
|
|
|
|
for (i = 0; i < grp->npins; i++) {
|
|
|
|
new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
|
|
|
|
new_map[i].data.configs.group_or_pin =
|
|
|
|
pin_get_name(pctldev, grp->pins[i]);
|
|
|
|
new_map[i].data.configs.configs = grp->data[i].configs;
|
|
|
|
new_map[i].data.configs.num_configs = grp->data[i].nconfigs;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
|
|
|
|
(*map)->data.mux.function, (*map)->data.mux.group, map_num);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rockchip_dt_free_map(struct pinctrl_dev *pctldev,
|
|
|
|
struct pinctrl_map *map, unsigned num_maps)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct pinctrl_ops rockchip_pctrl_ops = {
|
|
|
|
.get_groups_count = rockchip_get_groups_count,
|
|
|
|
.get_group_name = rockchip_get_group_name,
|
|
|
|
.get_group_pins = rockchip_get_group_pins,
|
|
|
|
.dt_node_to_map = rockchip_dt_node_to_map,
|
|
|
|
.dt_free_map = rockchip_dt_free_map,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Hardware access
|
|
|
|
*/
|
|
|
|
|
2017-08-23 16:00:07 +08:00
|
|
|
static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = {
|
|
|
|
{
|
|
|
|
.num = 1,
|
|
|
|
.pin = 0,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 0,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 1,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 2,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 2,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 4,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 3,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 6,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 4,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 8,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 5,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 10,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 6,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 12,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 7,
|
|
|
|
.reg = 0x418,
|
|
|
|
.bit = 14,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 8,
|
|
|
|
.reg = 0x41c,
|
|
|
|
.bit = 0,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 1,
|
|
|
|
.pin = 9,
|
|
|
|
.reg = 0x41c,
|
|
|
|
.bit = 2,
|
|
|
|
.mask = 0x3
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-07-21 14:27:15 +08:00
|
|
|
static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
|
|
|
|
{
|
|
|
|
.num = 2,
|
|
|
|
.pin = 20,
|
|
|
|
.reg = 0xe8,
|
|
|
|
.bit = 0,
|
|
|
|
.mask = 0x7
|
|
|
|
}, {
|
|
|
|
.num = 2,
|
|
|
|
.pin = 21,
|
|
|
|
.reg = 0xe8,
|
|
|
|
.bit = 4,
|
|
|
|
.mask = 0x7
|
|
|
|
}, {
|
|
|
|
.num = 2,
|
|
|
|
.pin = 22,
|
|
|
|
.reg = 0xe8,
|
|
|
|
.bit = 8,
|
|
|
|
.mask = 0x7
|
|
|
|
}, {
|
|
|
|
.num = 2,
|
|
|
|
.pin = 23,
|
|
|
|
.reg = 0xe8,
|
|
|
|
.bit = 12,
|
|
|
|
.mask = 0x7
|
|
|
|
}, {
|
|
|
|
.num = 2,
|
|
|
|
.pin = 24,
|
|
|
|
.reg = 0xd4,
|
|
|
|
.bit = 12,
|
|
|
|
.mask = 0x7
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = {
|
2017-02-10 18:23:49 +08:00
|
|
|
{
|
|
|
|
.num = 2,
|
|
|
|
.pin = 12,
|
|
|
|
.reg = 0x24,
|
|
|
|
.bit = 8,
|
|
|
|
.mask = 0x3
|
|
|
|
}, {
|
|
|
|
.num = 2,
|
|
|
|
.pin = 15,
|
|
|
|
.reg = 0x28,
|
|
|
|
.bit = 0,
|
|
|
|
.mask = 0x7
|
|
|
|
}, {
|
|
|
|
.num = 2,
|
|
|
|
.pin = 23,
|
|
|
|
.reg = 0x30,
|
|
|
|
.bit = 14,
|
|
|
|
.mask = 0x3
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin,
|
|
|
|
int *reg, u8 *bit, int *mask)
|
2017-02-10 18:23:49 +08:00
|
|
|
{
|
2017-07-21 14:27:14 +08:00
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct rockchip_mux_recalced_data *data;
|
2017-02-10 18:23:49 +08:00
|
|
|
int i;
|
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
for (i = 0; i < ctrl->niomux_recalced; i++) {
|
|
|
|
data = &ctrl->iomux_recalced[i];
|
|
|
|
if (data->num == bank->bank_num &&
|
|
|
|
data->pin == pin)
|
2017-02-10 18:23:49 +08:00
|
|
|
break;
|
2017-07-21 14:27:14 +08:00
|
|
|
}
|
2017-02-10 18:23:49 +08:00
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
if (i >= ctrl->niomux_recalced)
|
2017-02-10 18:23:49 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
*reg = data->reg;
|
|
|
|
*mask = data->mask;
|
|
|
|
*bit = data->bit;
|
|
|
|
}
|
|
|
|
|
2017-07-21 14:27:15 +08:00
|
|
|
static struct rockchip_mux_route_data rk3128_mux_route_data[] = {
|
|
|
|
{
|
|
|
|
/* spi-0 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 10,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 3) | BIT(16 + 4),
|
|
|
|
}, {
|
|
|
|
/* spi-1 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 27,
|
|
|
|
.func = 3,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3),
|
|
|
|
}, {
|
|
|
|
/* spi-2 */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 13,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4),
|
|
|
|
}, {
|
|
|
|
/* i2s-0 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 5,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 5),
|
|
|
|
}, {
|
|
|
|
/* i2s-1 */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 14,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 5) | BIT(5),
|
|
|
|
}, {
|
|
|
|
/* emmc-0 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 22,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 6),
|
|
|
|
}, {
|
|
|
|
/* emmc-1 */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 4,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x144,
|
|
|
|
.route_val = BIT(16 + 6) | BIT(6),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-05-26 15:20:21 +08:00
|
|
|
static struct rockchip_mux_route_data rk3228_mux_route_data[] = {
|
|
|
|
{
|
|
|
|
/* pwm0-0 */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 26,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16),
|
|
|
|
}, {
|
|
|
|
/* pwm0-1 */
|
|
|
|
.bank_num = 3,
|
|
|
|
.pin = 21,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16) | BIT(0),
|
|
|
|
}, {
|
|
|
|
/* pwm1-0 */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 27,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 1),
|
|
|
|
}, {
|
|
|
|
/* pwm1-1 */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 30,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 1) | BIT(1),
|
|
|
|
}, {
|
|
|
|
/* pwm2-0 */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 28,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 2),
|
|
|
|
}, {
|
|
|
|
/* pwm2-1 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 12,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 2) | BIT(2),
|
|
|
|
}, {
|
|
|
|
/* pwm3-0 */
|
|
|
|
.bank_num = 3,
|
|
|
|
.pin = 26,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 3),
|
|
|
|
}, {
|
|
|
|
/* pwm3-1 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 11,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 3) | BIT(3),
|
|
|
|
}, {
|
|
|
|
/* sdio-0_d0 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 1,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 4),
|
|
|
|
}, {
|
|
|
|
/* sdio-1_d0 */
|
|
|
|
.bank_num = 3,
|
|
|
|
.pin = 2,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 4) | BIT(4),
|
|
|
|
}, {
|
|
|
|
/* spi-0_rx */
|
|
|
|
.bank_num = 0,
|
|
|
|
.pin = 13,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 5),
|
|
|
|
}, {
|
|
|
|
/* spi-1_rx */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 0,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 5) | BIT(5),
|
|
|
|
}, {
|
|
|
|
/* emmc-0_cmd */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 22,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 7),
|
|
|
|
}, {
|
|
|
|
/* emmc-1_cmd */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 4,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 7) | BIT(7),
|
|
|
|
}, {
|
|
|
|
/* uart2-0_rx */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 19,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 8),
|
|
|
|
}, {
|
|
|
|
/* uart2-1_rx */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 10,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 8) | BIT(8),
|
|
|
|
}, {
|
|
|
|
/* uart1-0_rx */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 10,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 11),
|
|
|
|
}, {
|
|
|
|
/* uart1-1_rx */
|
|
|
|
.bank_num = 3,
|
|
|
|
.pin = 13,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 11) | BIT(11),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-05-26 15:20:22 +08:00
|
|
|
static struct rockchip_mux_route_data rk3328_mux_route_data[] = {
|
|
|
|
{
|
|
|
|
/* uart2dbg_rxm0 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 1,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16) | BIT(16 + 1),
|
|
|
|
}, {
|
|
|
|
/* uart2dbg_rxm1 */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 1,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16) | BIT(16 + 1) | BIT(0),
|
|
|
|
}, {
|
2017-09-30 20:13:21 +08:00
|
|
|
/* gmac-m1_rxd0 */
|
2017-05-26 15:20:22 +08:00
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 11,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
2017-09-30 20:13:21 +08:00
|
|
|
.route_val = BIT(16 + 2) | BIT(2),
|
|
|
|
}, {
|
|
|
|
/* gmac-m1-optimized_rxd3 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 14,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 10) | BIT(10),
|
2017-05-26 15:20:22 +08:00
|
|
|
}, {
|
|
|
|
/* pdm_sdi0m0 */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 19,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 3),
|
|
|
|
}, {
|
|
|
|
/* pdm_sdi0m1 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 23,
|
|
|
|
.func = 3,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 3) | BIT(3),
|
|
|
|
}, {
|
|
|
|
/* spi_rxdm2 */
|
|
|
|
.bank_num = 3,
|
|
|
|
.pin = 2,
|
|
|
|
.func = 4,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 4) | BIT(16 + 5) | BIT(5),
|
|
|
|
}, {
|
|
|
|
/* i2s2_sdim0 */
|
|
|
|
.bank_num = 1,
|
|
|
|
.pin = 24,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 6),
|
|
|
|
}, {
|
|
|
|
/* i2s2_sdim1 */
|
|
|
|
.bank_num = 3,
|
|
|
|
.pin = 2,
|
|
|
|
.func = 6,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 6) | BIT(6),
|
|
|
|
}, {
|
|
|
|
/* card_iom1 */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 22,
|
|
|
|
.func = 3,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 7) | BIT(7),
|
|
|
|
}, {
|
|
|
|
/* tsp_d5m1 */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 16,
|
|
|
|
.func = 3,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 8) | BIT(8),
|
|
|
|
}, {
|
|
|
|
/* cif_data5m1 */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 16,
|
|
|
|
.func = 4,
|
|
|
|
.route_offset = 0x50,
|
|
|
|
.route_val = BIT(16 + 9) | BIT(9),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-05-26 15:20:23 +08:00
|
|
|
static struct rockchip_mux_route_data rk3399_mux_route_data[] = {
|
|
|
|
{
|
|
|
|
/* uart2dbga_rx */
|
|
|
|
.bank_num = 4,
|
|
|
|
.pin = 8,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0xe21c,
|
|
|
|
.route_val = BIT(16 + 10) | BIT(16 + 11),
|
|
|
|
}, {
|
|
|
|
/* uart2dbgb_rx */
|
|
|
|
.bank_num = 4,
|
|
|
|
.pin = 16,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0xe21c,
|
|
|
|
.route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10),
|
|
|
|
}, {
|
|
|
|
/* uart2dbgc_rx */
|
|
|
|
.bank_num = 4,
|
|
|
|
.pin = 19,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0xe21c,
|
|
|
|
.route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11),
|
|
|
|
}, {
|
|
|
|
/* pcie_clkreqn */
|
|
|
|
.bank_num = 2,
|
|
|
|
.pin = 26,
|
|
|
|
.func = 2,
|
|
|
|
.route_offset = 0xe21c,
|
|
|
|
.route_val = BIT(16 + 14),
|
|
|
|
}, {
|
|
|
|
/* pcie_clkreqnb */
|
|
|
|
.bank_num = 4,
|
|
|
|
.pin = 24,
|
|
|
|
.func = 1,
|
|
|
|
.route_offset = 0xe21c,
|
|
|
|
.route_val = BIT(16 + 14) | BIT(14),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2017-05-26 15:20:20 +08:00
|
|
|
static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin,
|
|
|
|
int mux, u32 *reg, u32 *value)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct rockchip_mux_route_data *data;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ctrl->niomux_routes; i++) {
|
|
|
|
data = &ctrl->iomux_routes[i];
|
|
|
|
if ((data->bank_num == bank->bank_num) &&
|
|
|
|
(data->pin == pin) && (data->func == mux))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (i >= ctrl->niomux_routes)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
*reg = data->route_offset;
|
|
|
|
*value = data->route_val;
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2014-04-23 20:28:59 +08:00
|
|
|
static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
2014-06-16 07:36:05 +08:00
|
|
|
int iomux_num = (pin / 8);
|
2014-06-16 07:37:23 +08:00
|
|
|
struct regmap *regmap;
|
2014-05-05 19:58:20 +08:00
|
|
|
unsigned int val;
|
2017-02-10 18:23:48 +08:00
|
|
|
int reg, ret, mask, mux_type;
|
2014-04-23 20:28:59 +08:00
|
|
|
u8 bit;
|
|
|
|
|
2014-06-16 07:36:05 +08:00
|
|
|
if (iomux_num > 3)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2014-06-16 07:37:49 +08:00
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
|
|
|
|
dev_err(info->dev, "pin %d is unrouted\n", pin);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2014-06-16 07:36:05 +08:00
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
|
2014-04-23 20:28:59 +08:00
|
|
|
return RK_FUNC_GPIO;
|
|
|
|
|
2014-06-16 07:37:23 +08:00
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
|
|
? info->regmap_pmu : info->regmap_base;
|
|
|
|
|
2014-04-23 20:28:59 +08:00
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
2017-02-10 18:23:48 +08:00
|
|
|
mux_type = bank->iomux[iomux_num].type;
|
2014-06-16 07:36:33 +08:00
|
|
|
reg = bank->iomux[iomux_num].offset;
|
2017-02-10 18:23:48 +08:00
|
|
|
if (mux_type & IOMUX_WIDTH_4BIT) {
|
2014-06-16 07:36:57 +08:00
|
|
|
if ((pin % 8) >= 4)
|
|
|
|
reg += 0x4;
|
|
|
|
bit = (pin % 4) * 4;
|
2017-02-10 18:23:47 +08:00
|
|
|
mask = 0xf;
|
2017-02-10 18:23:48 +08:00
|
|
|
} else if (mux_type & IOMUX_WIDTH_3BIT) {
|
2017-02-10 18:23:47 +08:00
|
|
|
if ((pin % 8) >= 5)
|
|
|
|
reg += 0x4;
|
|
|
|
bit = (pin % 8 % 5) * 3;
|
|
|
|
mask = 0x7;
|
2014-06-16 07:36:57 +08:00
|
|
|
} else {
|
|
|
|
bit = (pin % 8) * 2;
|
2017-02-10 18:23:47 +08:00
|
|
|
mask = 0x3;
|
2014-06-16 07:36:57 +08:00
|
|
|
}
|
2014-04-23 20:28:59 +08:00
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
if (bank->recalced_mask & BIT(pin))
|
|
|
|
rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask);
|
2017-02-10 18:23:48 +08:00
|
|
|
|
2014-06-16 07:37:23 +08:00
|
|
|
ret = regmap_read(regmap, reg, &val);
|
2014-05-05 19:58:20 +08:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2014-06-16 07:36:57 +08:00
|
|
|
return ((val >> bit) & mask);
|
2014-04-23 20:28:59 +08:00
|
|
|
}
|
|
|
|
|
2017-03-23 18:59:30 +08:00
|
|
|
static int rockchip_verify_mux(struct rockchip_pin_bank *bank,
|
|
|
|
int pin, int mux)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
int iomux_num = (pin / 8);
|
|
|
|
|
|
|
|
if (iomux_num > 3)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) {
|
|
|
|
dev_err(info->dev, "pin %d is unrouted\n", pin);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) {
|
|
|
|
if (mux != RK_FUNC_GPIO) {
|
|
|
|
dev_err(info->dev,
|
|
|
|
"pin %d only supports a gpio mux\n", pin);
|
|
|
|
return -ENOTSUPP;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/*
|
|
|
|
* Set a new mux function for a pin.
|
|
|
|
*
|
|
|
|
* The register is divided into the upper and lower 16 bit. When changing
|
|
|
|
* a value, the previous register value is not read and changed. Instead
|
|
|
|
* it seems the changed bits are marked in the upper 16 bit, while the
|
|
|
|
* changed value gets set in the same offset in the lower 16 bit.
|
|
|
|
* All pin settings seem to be 2 bit wide in both the upper and lower
|
|
|
|
* parts.
|
|
|
|
* @bank: pin bank to change
|
|
|
|
* @pin: pin to change
|
|
|
|
* @mux: new mux function to set
|
|
|
|
*/
|
2014-03-26 07:57:00 +08:00
|
|
|
static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
2013-06-11 04:16:22 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
2014-06-16 07:36:05 +08:00
|
|
|
int iomux_num = (pin / 8);
|
2014-06-16 07:37:23 +08:00
|
|
|
struct regmap *regmap;
|
2017-02-10 18:23:48 +08:00
|
|
|
int reg, ret, mask, mux_type;
|
2013-06-11 04:16:22 +08:00
|
|
|
u8 bit;
|
2017-05-26 15:20:20 +08:00
|
|
|
u32 data, rmask, route_reg, route_val;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2017-03-23 18:59:30 +08:00
|
|
|
ret = rockchip_verify_mux(bank, pin, mux);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2014-06-16 07:37:49 +08:00
|
|
|
|
2017-03-23 18:59:30 +08:00
|
|
|
if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY)
|
|
|
|
return 0;
|
2014-03-26 07:57:52 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n",
|
|
|
|
bank->bank_num, pin, mux);
|
|
|
|
|
2014-06-16 07:37:23 +08:00
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
|
|
? info->regmap_pmu : info->regmap_base;
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
2017-02-10 18:23:48 +08:00
|
|
|
mux_type = bank->iomux[iomux_num].type;
|
2014-06-16 07:36:33 +08:00
|
|
|
reg = bank->iomux[iomux_num].offset;
|
2017-02-10 18:23:48 +08:00
|
|
|
if (mux_type & IOMUX_WIDTH_4BIT) {
|
2014-06-16 07:36:57 +08:00
|
|
|
if ((pin % 8) >= 4)
|
|
|
|
reg += 0x4;
|
|
|
|
bit = (pin % 4) * 4;
|
2017-02-10 18:23:47 +08:00
|
|
|
mask = 0xf;
|
2017-02-10 18:23:48 +08:00
|
|
|
} else if (mux_type & IOMUX_WIDTH_3BIT) {
|
2017-02-10 18:23:47 +08:00
|
|
|
if ((pin % 8) >= 5)
|
|
|
|
reg += 0x4;
|
|
|
|
bit = (pin % 8 % 5) * 3;
|
|
|
|
mask = 0x7;
|
2014-06-16 07:36:57 +08:00
|
|
|
} else {
|
|
|
|
bit = (pin % 8) * 2;
|
2017-02-10 18:23:47 +08:00
|
|
|
mask = 0x3;
|
2014-06-16 07:36:57 +08:00
|
|
|
}
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
if (bank->recalced_mask & BIT(pin))
|
|
|
|
rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask);
|
2017-02-10 18:23:48 +08:00
|
|
|
|
2017-05-26 15:20:20 +08:00
|
|
|
if (bank->route_mask & BIT(pin)) {
|
|
|
|
if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
|
|
|
|
&route_val)) {
|
|
|
|
ret = regmap_write(regmap, route_reg, route_val);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-06-16 07:36:57 +08:00
|
|
|
data = (mask << (bit + 16));
|
2014-08-01 13:58:00 +08:00
|
|
|
rmask = data | (data >> 16);
|
2014-06-16 07:36:57 +08:00
|
|
|
data |= (mux & mask) << bit;
|
2014-08-01 13:58:00 +08:00
|
|
|
ret = regmap_update_bits(regmap, reg, rmask, data);
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
return ret;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
#define RV1108_PULL_PMU_OFFSET 0x10
|
|
|
|
#define RV1108_PULL_OFFSET 0x110
|
|
|
|
#define RV1108_PULL_PINS_PER_REG 8
|
|
|
|
#define RV1108_PULL_BITS_PER_PIN 2
|
|
|
|
#define RV1108_PULL_BANK_STRIDE 16
|
2016-11-15 18:02:43 +08:00
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
2016-11-15 18:02:43 +08:00
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg = RV1108_PULL_PMU_OFFSET;
|
2016-11-15 18:02:43 +08:00
|
|
|
} else {
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg = RV1108_PULL_OFFSET;
|
2016-11-15 18:02:43 +08:00
|
|
|
*regmap = info->regmap_base;
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
|
|
*reg -= 0x10;
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg += bank->bank_num * RV1108_PULL_BANK_STRIDE;
|
2016-11-15 18:02:43 +08:00
|
|
|
}
|
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg += ((pin_num / RV1108_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % RV1108_PULL_PINS_PER_REG);
|
|
|
|
*bit *= RV1108_PULL_BITS_PER_PIN;
|
2016-11-15 18:02:43 +08:00
|
|
|
}
|
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
#define RV1108_DRV_PMU_OFFSET 0x20
|
|
|
|
#define RV1108_DRV_GRF_OFFSET 0x210
|
|
|
|
#define RV1108_DRV_BITS_PER_PIN 2
|
|
|
|
#define RV1108_DRV_PINS_PER_REG 8
|
|
|
|
#define RV1108_DRV_BANK_STRIDE 16
|
2016-11-15 18:02:43 +08:00
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
2016-11-15 18:02:43 +08:00
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg = RV1108_DRV_PMU_OFFSET;
|
2016-11-15 18:02:43 +08:00
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg = RV1108_DRV_GRF_OFFSET;
|
2016-11-15 18:02:43 +08:00
|
|
|
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
|
|
*reg -= 0x10;
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg += bank->bank_num * RV1108_DRV_BANK_STRIDE;
|
2016-11-15 18:02:43 +08:00
|
|
|
}
|
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
*reg += ((pin_num / RV1108_DRV_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RV1108_DRV_PINS_PER_REG;
|
|
|
|
*bit *= RV1108_DRV_BITS_PER_PIN;
|
2016-11-15 18:02:43 +08:00
|
|
|
}
|
|
|
|
|
2017-07-31 18:10:22 +08:00
|
|
|
#define RV1108_SCHMITT_PMU_OFFSET 0x30
|
|
|
|
#define RV1108_SCHMITT_GRF_OFFSET 0x388
|
|
|
|
#define RV1108_SCHMITT_BANK_STRIDE 8
|
|
|
|
#define RV1108_SCHMITT_PINS_PER_GRF_REG 16
|
|
|
|
#define RV1108_SCHMITT_PINS_PER_PMU_REG 8
|
|
|
|
|
|
|
|
static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num,
|
|
|
|
struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
int pins_per_reg;
|
|
|
|
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
*reg = RV1108_SCHMITT_PMU_OFFSET;
|
|
|
|
pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG;
|
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RV1108_SCHMITT_GRF_OFFSET;
|
|
|
|
pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG;
|
|
|
|
*reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE;
|
|
|
|
}
|
|
|
|
*reg += ((pin_num / pins_per_reg) * 4);
|
|
|
|
*bit = pin_num % pins_per_reg;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-10-16 07:07:20 +08:00
|
|
|
#define RK2928_PULL_OFFSET 0x118
|
|
|
|
#define RK2928_PULL_PINS_PER_REG 16
|
|
|
|
#define RK2928_PULL_BANK_STRIDE 8
|
|
|
|
|
|
|
|
static void rk2928_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
2014-05-05 19:58:20 +08:00
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
2013-10-16 07:07:20 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK2928_PULL_OFFSET;
|
2013-10-16 07:07:20 +08:00
|
|
|
*reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
|
|
|
|
*reg += (pin_num / RK2928_PULL_PINS_PER_REG) * 4;
|
|
|
|
|
|
|
|
*bit = pin_num % RK2928_PULL_PINS_PER_REG;
|
|
|
|
};
|
|
|
|
|
2017-07-21 14:27:15 +08:00
|
|
|
#define RK3128_PULL_OFFSET 0x118
|
|
|
|
|
|
|
|
static void rk3128_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3128_PULL_OFFSET;
|
|
|
|
*reg += bank->bank_num * RK2928_PULL_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK2928_PULL_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = pin_num % RK2928_PULL_PINS_PER_REG;
|
|
|
|
}
|
|
|
|
|
2014-05-05 19:58:00 +08:00
|
|
|
#define RK3188_PULL_OFFSET 0x164
|
2013-10-16 07:08:42 +08:00
|
|
|
#define RK3188_PULL_BITS_PER_PIN 2
|
|
|
|
#define RK3188_PULL_PINS_PER_REG 8
|
|
|
|
#define RK3188_PULL_BANK_STRIDE 16
|
2014-05-05 19:59:09 +08:00
|
|
|
#define RK3188_PULL_PMU_OFFSET 0x64
|
2013-10-16 07:08:42 +08:00
|
|
|
|
|
|
|
static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
2014-05-05 19:58:20 +08:00
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
2013-10-16 07:08:42 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 12 pins of the first bank are located elsewhere */
|
2014-06-16 07:36:05 +08:00
|
|
|
if (bank->bank_num == 0 && pin_num < 12) {
|
2014-05-05 19:59:09 +08:00
|
|
|
*regmap = info->regmap_pmu ? info->regmap_pmu
|
|
|
|
: bank->regmap_pull;
|
|
|
|
*reg = info->regmap_pmu ? RK3188_PULL_PMU_OFFSET : 0;
|
2014-05-05 19:58:20 +08:00
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
2013-10-16 07:08:42 +08:00
|
|
|
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
} else {
|
2014-05-05 19:58:20 +08:00
|
|
|
*regmap = info->regmap_pull ? info->regmap_pull
|
|
|
|
: info->regmap_base;
|
|
|
|
*reg = info->regmap_pull ? 0 : RK3188_PULL_OFFSET;
|
|
|
|
|
2014-05-05 19:58:00 +08:00
|
|
|
/* correct the offset, as it is the 2nd pull register */
|
|
|
|
*reg -= 4;
|
2013-10-16 07:08:42 +08:00
|
|
|
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The bits in these registers have an inverse ordering
|
|
|
|
* with the lowest pin being in bits 15:14 and the highest
|
|
|
|
* pin in bits 1:0
|
|
|
|
*/
|
|
|
|
*bit = 7 - (pin_num % RK3188_PULL_PINS_PER_REG);
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-06-16 07:38:14 +08:00
|
|
|
#define RK3288_PULL_OFFSET 0x140
|
|
|
|
static void rk3288_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
*reg = RK3188_PULL_PMU_OFFSET;
|
|
|
|
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3288_PULL_OFFSET;
|
|
|
|
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
|
|
*reg -= 0x10;
|
|
|
|
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-07-20 07:50:11 +08:00
|
|
|
#define RK3288_DRV_PMU_OFFSET 0x70
|
|
|
|
#define RK3288_DRV_GRF_OFFSET 0x1c0
|
|
|
|
#define RK3288_DRV_BITS_PER_PIN 2
|
|
|
|
#define RK3288_DRV_PINS_PER_REG 8
|
|
|
|
#define RK3288_DRV_BANK_STRIDE 16
|
|
|
|
|
|
|
|
static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 24 pins of the first bank are located in PMU */
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
*reg = RK3288_DRV_PMU_OFFSET;
|
|
|
|
|
|
|
|
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3288_DRV_PINS_PER_REG;
|
|
|
|
*bit *= RK3288_DRV_BITS_PER_PIN;
|
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3288_DRV_GRF_OFFSET;
|
|
|
|
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
|
|
*reg -= 0x10;
|
|
|
|
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
|
|
|
|
*bit *= RK3288_DRV_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-12-09 17:04:06 +08:00
|
|
|
#define RK3228_PULL_OFFSET 0x100
|
|
|
|
|
|
|
|
static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3228_PULL_OFFSET;
|
|
|
|
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define RK3228_DRV_GRF_OFFSET 0x200
|
|
|
|
|
|
|
|
static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3228_DRV_GRF_OFFSET;
|
|
|
|
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
|
|
|
|
*bit *= RK3288_DRV_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
|
2015-06-13 05:51:01 +08:00
|
|
|
#define RK3368_PULL_GRF_OFFSET 0x100
|
|
|
|
#define RK3368_PULL_PMU_OFFSET 0x10
|
|
|
|
|
|
|
|
static void rk3368_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 32 pins of the first bank are located in PMU */
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
*reg = RK3368_PULL_PMU_OFFSET;
|
|
|
|
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3368_PULL_GRF_OFFSET;
|
|
|
|
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
|
|
*reg -= 0x10;
|
|
|
|
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define RK3368_DRV_PMU_OFFSET 0x20
|
|
|
|
#define RK3368_DRV_GRF_OFFSET 0x200
|
|
|
|
|
|
|
|
static void rk3368_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The first 32 pins of the first bank are located in PMU */
|
|
|
|
if (bank->bank_num == 0) {
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
*reg = RK3368_DRV_PMU_OFFSET;
|
|
|
|
|
|
|
|
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3288_DRV_PINS_PER_REG;
|
|
|
|
*bit *= RK3288_DRV_BITS_PER_PIN;
|
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3368_DRV_GRF_OFFSET;
|
|
|
|
|
|
|
|
/* correct the offset, as we're starting with the 2nd bank */
|
|
|
|
*reg -= 0x10;
|
|
|
|
*reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3288_DRV_PINS_PER_REG);
|
|
|
|
*bit *= RK3288_DRV_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
#define RK3399_PULL_GRF_OFFSET 0xe040
|
|
|
|
#define RK3399_PULL_PMU_OFFSET 0x40
|
|
|
|
#define RK3399_DRV_3BITS_PER_PIN 3
|
|
|
|
|
|
|
|
static void rk3399_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
/* The bank0:16 and bank1:32 pins are located in PMU */
|
|
|
|
if ((bank->bank_num == 0) || (bank->bank_num == 1)) {
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
*reg = RK3399_PULL_PMU_OFFSET;
|
|
|
|
|
|
|
|
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
|
|
|
|
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
} else {
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3399_PULL_GRF_OFFSET;
|
|
|
|
|
|
|
|
/* correct the offset, as we're starting with the 3rd bank */
|
|
|
|
*reg -= 0x20;
|
|
|
|
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
|
|
|
|
|
|
|
|
*bit = (pin_num % RK3188_PULL_PINS_PER_REG);
|
|
|
|
*bit *= RK3188_PULL_BITS_PER_PIN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
int drv_num = (pin_num / 8);
|
|
|
|
|
|
|
|
/* The bank0:16 and bank1:32 pins are located in PMU */
|
|
|
|
if ((bank->bank_num == 0) || (bank->bank_num == 1))
|
|
|
|
*regmap = info->regmap_pmu;
|
|
|
|
else
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
|
|
|
|
*reg = bank->drv[drv_num].offset;
|
|
|
|
if ((bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) ||
|
|
|
|
(bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY))
|
|
|
|
*bit = (pin_num % 8) * 3;
|
|
|
|
else
|
|
|
|
*bit = (pin_num % 8) * 2;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = {
|
|
|
|
{ 2, 4, 8, 12, -1, -1, -1, -1 },
|
|
|
|
{ 3, 6, 9, 12, -1, -1, -1, -1 },
|
|
|
|
{ 5, 10, 15, 20, -1, -1, -1, -1 },
|
|
|
|
{ 4, 6, 8, 10, 12, 14, 16, 18 },
|
|
|
|
{ 4, 7, 10, 13, 16, 19, 22, 26 }
|
|
|
|
};
|
2015-06-13 05:50:11 +08:00
|
|
|
|
|
|
|
static int rockchip_get_drive_perpin(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num)
|
2014-07-20 07:50:11 +08:00
|
|
|
{
|
2015-06-13 05:50:11 +08:00
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
2014-07-20 07:50:11 +08:00
|
|
|
struct regmap *regmap;
|
|
|
|
int reg, ret;
|
2016-02-01 10:58:21 +08:00
|
|
|
u32 data, temp, rmask_bits;
|
2014-07-20 07:50:11 +08:00
|
|
|
u8 bit;
|
2016-02-01 10:58:21 +08:00
|
|
|
int drv_type = bank->drv[pin_num / 8].drv_type;
|
2014-07-20 07:50:11 +08:00
|
|
|
|
2015-06-13 05:50:11 +08:00
|
|
|
ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit);
|
2014-07-20 07:50:11 +08:00
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
switch (drv_type) {
|
|
|
|
case DRV_TYPE_IO_1V8_3V0_AUTO:
|
|
|
|
case DRV_TYPE_IO_3V3_ONLY:
|
|
|
|
rmask_bits = RK3399_DRV_3BITS_PER_PIN;
|
|
|
|
switch (bit) {
|
|
|
|
case 0 ... 12:
|
|
|
|
/* regular case, nothing to do */
|
|
|
|
break;
|
|
|
|
case 15:
|
|
|
|
/*
|
|
|
|
* drive-strength offset is special, as it is
|
|
|
|
* spread over 2 registers
|
|
|
|
*/
|
|
|
|
ret = regmap_read(regmap, reg, &data);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = regmap_read(regmap, reg + 0x4, &temp);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* the bit data[15] contains bit 0 of the value
|
|
|
|
* while temp[1:0] contains bits 2 and 1
|
|
|
|
*/
|
|
|
|
data >>= 15;
|
|
|
|
temp &= 0x3;
|
|
|
|
temp <<= 1;
|
|
|
|
data |= temp;
|
|
|
|
|
|
|
|
return rockchip_perpin_drv_list[drv_type][data];
|
|
|
|
case 18 ... 21:
|
|
|
|
/* setting fully enclosed in the second register */
|
|
|
|
reg += 4;
|
|
|
|
bit -= 16;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n",
|
|
|
|
bit, drv_type);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
case DRV_TYPE_IO_DEFAULT:
|
|
|
|
case DRV_TYPE_IO_1V8_OR_3V0:
|
|
|
|
case DRV_TYPE_IO_1V8_ONLY:
|
|
|
|
rmask_bits = RK3288_DRV_BITS_PER_PIN;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(info->dev, "unsupported pinctrl drive type: %d\n",
|
|
|
|
drv_type);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2014-07-20 07:50:11 +08:00
|
|
|
ret = regmap_read(regmap, reg, &data);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
data >>= bit;
|
2016-02-01 10:58:21 +08:00
|
|
|
data &= (1 << rmask_bits) - 1;
|
2014-07-20 07:50:11 +08:00
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
return rockchip_perpin_drv_list[drv_type][data];
|
2014-07-20 07:50:11 +08:00
|
|
|
}
|
|
|
|
|
2015-06-13 05:50:11 +08:00
|
|
|
static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, int strength)
|
2014-07-20 07:50:11 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
2015-06-13 05:50:11 +08:00
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
2014-07-20 07:50:11 +08:00
|
|
|
struct regmap *regmap;
|
|
|
|
int reg, ret, i;
|
2016-02-01 10:58:21 +08:00
|
|
|
u32 data, rmask, rmask_bits, temp;
|
2014-07-20 07:50:11 +08:00
|
|
|
u8 bit;
|
2016-02-01 10:58:21 +08:00
|
|
|
int drv_type = bank->drv[pin_num / 8].drv_type;
|
|
|
|
|
|
|
|
dev_dbg(info->dev, "setting drive of GPIO%d-%d to %d\n",
|
|
|
|
bank->bank_num, pin_num, strength);
|
2014-07-20 07:50:11 +08:00
|
|
|
|
2015-06-13 05:50:11 +08:00
|
|
|
ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit);
|
2014-07-20 07:50:11 +08:00
|
|
|
|
|
|
|
ret = -EINVAL;
|
2016-02-01 10:58:21 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) {
|
|
|
|
if (rockchip_perpin_drv_list[drv_type][i] == strength) {
|
2014-07-20 07:50:11 +08:00
|
|
|
ret = i;
|
|
|
|
break;
|
2016-02-01 10:58:21 +08:00
|
|
|
} else if (rockchip_perpin_drv_list[drv_type][i] < 0) {
|
|
|
|
ret = rockchip_perpin_drv_list[drv_type][i];
|
|
|
|
break;
|
2014-07-20 07:50:11 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(info->dev, "unsupported driver strength %d\n",
|
|
|
|
strength);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
switch (drv_type) {
|
|
|
|
case DRV_TYPE_IO_1V8_3V0_AUTO:
|
|
|
|
case DRV_TYPE_IO_3V3_ONLY:
|
|
|
|
rmask_bits = RK3399_DRV_3BITS_PER_PIN;
|
|
|
|
switch (bit) {
|
|
|
|
case 0 ... 12:
|
|
|
|
/* regular case, nothing to do */
|
|
|
|
break;
|
|
|
|
case 15:
|
|
|
|
/*
|
|
|
|
* drive-strength offset is special, as it is spread
|
|
|
|
* over 2 registers, the bit data[15] contains bit 0
|
|
|
|
* of the value while temp[1:0] contains bits 2 and 1
|
|
|
|
*/
|
|
|
|
data = (ret & 0x1) << 15;
|
|
|
|
temp = (ret >> 0x1) & 0x3;
|
|
|
|
|
|
|
|
rmask = BIT(15) | BIT(31);
|
|
|
|
data |= BIT(31);
|
|
|
|
ret = regmap_update_bits(regmap, reg, rmask, data);
|
2017-03-23 18:59:28 +08:00
|
|
|
if (ret)
|
2016-02-01 10:58:21 +08:00
|
|
|
return ret;
|
|
|
|
|
|
|
|
rmask = 0x3 | (0x3 << 16);
|
|
|
|
temp |= (0x3 << 16);
|
|
|
|
reg += 0x4;
|
|
|
|
ret = regmap_update_bits(regmap, reg, rmask, temp);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
case 18 ... 21:
|
|
|
|
/* setting fully enclosed in the second register */
|
|
|
|
reg += 4;
|
|
|
|
bit -= 16;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(info->dev, "unsupported bit: %d for pinctrl drive type: %d\n",
|
|
|
|
bit, drv_type);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case DRV_TYPE_IO_DEFAULT:
|
|
|
|
case DRV_TYPE_IO_1V8_OR_3V0:
|
|
|
|
case DRV_TYPE_IO_1V8_ONLY:
|
|
|
|
rmask_bits = RK3288_DRV_BITS_PER_PIN;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(info->dev, "unsupported pinctrl drive type: %d\n",
|
|
|
|
drv_type);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2014-07-20 07:50:11 +08:00
|
|
|
/* enable the write to the equivalent lower bits */
|
2016-02-01 10:58:21 +08:00
|
|
|
data = ((1 << rmask_bits) - 1) << (bit + 16);
|
2014-08-01 13:58:00 +08:00
|
|
|
rmask = data | (data >> 16);
|
2014-07-20 07:50:11 +08:00
|
|
|
data |= (ret << bit);
|
|
|
|
|
2014-08-01 13:58:00 +08:00
|
|
|
ret = regmap_update_bits(regmap, reg, rmask, data);
|
2014-07-20 07:50:11 +08:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
static int rockchip_pull_list[PULL_TYPE_MAX][4] = {
|
|
|
|
{
|
|
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
|
|
PIN_CONFIG_BIAS_PULL_UP,
|
|
|
|
PIN_CONFIG_BIAS_PULL_DOWN,
|
|
|
|
PIN_CONFIG_BIAS_BUS_HOLD
|
|
|
|
},
|
|
|
|
{
|
|
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
|
|
PIN_CONFIG_BIAS_PULL_DOWN,
|
|
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
|
|
PIN_CONFIG_BIAS_PULL_UP
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
2014-05-05 19:58:20 +08:00
|
|
|
struct regmap *regmap;
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
int reg, ret, pull_type;
|
2013-06-11 04:16:22 +08:00
|
|
|
u8 bit;
|
2013-10-16 07:08:42 +08:00
|
|
|
u32 data;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
/* rk3066b does support any pulls */
|
2013-10-16 07:07:20 +08:00
|
|
|
if (ctrl->type == RK3066B)
|
2013-06-11 04:16:22 +08:00
|
|
|
return PIN_CONFIG_BIAS_DISABLE;
|
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit);
|
|
|
|
|
|
|
|
ret = regmap_read(regmap, reg, &data);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2013-10-16 07:08:42 +08:00
|
|
|
|
2013-10-16 07:07:20 +08:00
|
|
|
switch (ctrl->type) {
|
|
|
|
case RK2928:
|
2017-07-21 14:27:15 +08:00
|
|
|
case RK3128:
|
2014-05-05 19:58:20 +08:00
|
|
|
return !(data & BIT(bit))
|
2013-06-11 04:16:22 +08:00
|
|
|
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
|
|
|
|
: PIN_CONFIG_BIAS_DISABLE;
|
2017-03-18 01:18:36 +08:00
|
|
|
case RV1108:
|
2013-10-16 07:07:20 +08:00
|
|
|
case RK3188:
|
2014-07-20 07:49:17 +08:00
|
|
|
case RK3288:
|
2015-06-13 05:51:01 +08:00
|
|
|
case RK3368:
|
2016-02-01 10:58:21 +08:00
|
|
|
case RK3399:
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
pull_type = bank->pull_type[pin_num / 8];
|
2014-05-05 19:58:20 +08:00
|
|
|
data >>= bit;
|
2013-10-16 07:08:42 +08:00
|
|
|
data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1;
|
|
|
|
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
return rockchip_pull_list[pull_type][data];
|
2013-10-16 07:07:20 +08:00
|
|
|
default:
|
|
|
|
dev_err(info->dev, "unsupported pinctrl type\n");
|
|
|
|
return -EINVAL;
|
|
|
|
};
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_set_pull(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, int pull)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
2014-05-05 19:58:20 +08:00
|
|
|
struct regmap *regmap;
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
int reg, ret, i, pull_type;
|
2013-06-11 04:16:22 +08:00
|
|
|
u8 bit;
|
2014-08-01 13:58:00 +08:00
|
|
|
u32 data, rmask;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
dev_dbg(info->dev, "setting pull of GPIO%d-%d to %d\n",
|
|
|
|
bank->bank_num, pin_num, pull);
|
|
|
|
|
|
|
|
/* rk3066b does support any pulls */
|
2013-10-16 07:07:20 +08:00
|
|
|
if (ctrl->type == RK3066B)
|
2013-06-11 04:16:22 +08:00
|
|
|
return pull ? -EINVAL : 0;
|
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit);
|
2013-10-16 07:08:42 +08:00
|
|
|
|
2013-10-16 07:07:20 +08:00
|
|
|
switch (ctrl->type) {
|
|
|
|
case RK2928:
|
2017-07-21 14:27:15 +08:00
|
|
|
case RK3128:
|
2013-06-11 04:16:22 +08:00
|
|
|
data = BIT(bit + 16);
|
|
|
|
if (pull == PIN_CONFIG_BIAS_DISABLE)
|
|
|
|
data |= BIT(bit);
|
2014-05-05 19:58:20 +08:00
|
|
|
ret = regmap_write(regmap, reg, data);
|
2013-10-16 07:07:20 +08:00
|
|
|
break;
|
2017-03-18 01:18:36 +08:00
|
|
|
case RV1108:
|
2013-10-16 07:07:20 +08:00
|
|
|
case RK3188:
|
2014-07-20 07:49:17 +08:00
|
|
|
case RK3288:
|
2015-06-13 05:51:01 +08:00
|
|
|
case RK3368:
|
2016-02-01 10:58:21 +08:00
|
|
|
case RK3399:
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
pull_type = bank->pull_type[pin_num / 8];
|
|
|
|
ret = -EINVAL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[pull_type]);
|
|
|
|
i++) {
|
|
|
|
if (rockchip_pull_list[pull_type][i] == pull) {
|
|
|
|
ret = i;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(info->dev, "unsupported pull setting %d\n",
|
|
|
|
pull);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-10-16 07:08:42 +08:00
|
|
|
/* enable the write to the equivalent lower bits */
|
|
|
|
data = ((1 << RK3188_PULL_BITS_PER_PIN) - 1) << (bit + 16);
|
2014-08-01 13:58:00 +08:00
|
|
|
rmask = data | (data >> 16);
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
data |= (ret << bit);
|
2013-10-16 07:08:42 +08:00
|
|
|
|
2014-08-01 13:58:00 +08:00
|
|
|
ret = regmap_update_bits(regmap, reg, rmask, data);
|
2013-10-16 07:08:42 +08:00
|
|
|
break;
|
2013-10-16 07:07:20 +08:00
|
|
|
default:
|
|
|
|
dev_err(info->dev, "unsupported pinctrl type\n");
|
|
|
|
return -EINVAL;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2014-05-05 19:58:20 +08:00
|
|
|
return ret;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2017-03-02 15:11:24 +08:00
|
|
|
#define RK3328_SCHMITT_BITS_PER_PIN 1
|
|
|
|
#define RK3328_SCHMITT_PINS_PER_REG 16
|
|
|
|
#define RK3328_SCHMITT_BANK_STRIDE 8
|
|
|
|
#define RK3328_SCHMITT_GRF_OFFSET 0x380
|
|
|
|
|
|
|
|
static int rk3328_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num,
|
|
|
|
struct regmap **regmap,
|
|
|
|
int *reg, u8 *bit)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
|
|
|
|
*regmap = info->regmap_base;
|
|
|
|
*reg = RK3328_SCHMITT_GRF_OFFSET;
|
|
|
|
|
|
|
|
*reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE;
|
|
|
|
*reg += ((pin_num / RK3328_SCHMITT_PINS_PER_REG) * 4);
|
|
|
|
*bit = pin_num % RK3328_SCHMITT_PINS_PER_REG;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-03-02 15:11:23 +08:00
|
|
|
static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct regmap *regmap;
|
|
|
|
int reg, ret;
|
|
|
|
u8 bit;
|
|
|
|
u32 data;
|
|
|
|
|
|
|
|
ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = regmap_read(regmap, reg, &data);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
data >>= bit;
|
|
|
|
return data & 0x1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
|
|
|
|
int pin_num, int enable)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = bank->drvdata;
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct regmap *regmap;
|
|
|
|
int reg, ret;
|
|
|
|
u8 bit;
|
|
|
|
u32 data, rmask;
|
|
|
|
|
|
|
|
dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n",
|
|
|
|
bank->bank_num, pin_num, enable);
|
|
|
|
|
|
|
|
ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
|
|
data = BIT(bit + 16) | (enable << bit);
|
|
|
|
rmask = BIT(bit + 16) | BIT(bit);
|
|
|
|
|
2017-03-23 18:59:28 +08:00
|
|
|
return regmap_update_bits(regmap, reg, rmask, data);
|
2017-03-02 15:11:23 +08:00
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/*
|
|
|
|
* Pinmux_ops handling
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int rockchip_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
|
|
|
|
return info->nfunctions;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const char *rockchip_pmx_get_func_name(struct pinctrl_dev *pctldev,
|
|
|
|
unsigned selector)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
|
|
|
|
return info->functions[selector].name;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_pmx_get_groups(struct pinctrl_dev *pctldev,
|
|
|
|
unsigned selector, const char * const **groups,
|
|
|
|
unsigned * const num_groups)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
|
|
|
|
*groups = info->functions[selector].groups;
|
|
|
|
*num_groups = info->functions[selector].ngroups;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-09-03 19:02:56 +08:00
|
|
|
static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
|
|
|
|
unsigned group)
|
2013-06-11 04:16:22 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
const unsigned int *pins = info->groups[group].pins;
|
|
|
|
const struct rockchip_pin_config *data = info->groups[group].data;
|
|
|
|
struct rockchip_pin_bank *bank;
|
2014-03-26 07:57:00 +08:00
|
|
|
int cnt, ret = 0;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
dev_dbg(info->dev, "enable function %s group %s\n",
|
|
|
|
info->functions[selector].name, info->groups[group].name);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* for each pin in the pin group selected, program the correspoding pin
|
|
|
|
* pin function number in the config register.
|
|
|
|
*/
|
|
|
|
for (cnt = 0; cnt < info->groups[group].npins; cnt++) {
|
|
|
|
bank = pin_to_bank(info, pins[cnt]);
|
2014-03-26 07:57:00 +08:00
|
|
|
ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
|
|
|
|
data[cnt].func);
|
|
|
|
if (ret)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ret) {
|
|
|
|
/* revert the already done pin settings */
|
|
|
|
for (cnt--; cnt >= 0; cnt--)
|
|
|
|
rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0);
|
|
|
|
|
|
|
|
return ret;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-03-15 15:55:45 +08:00
|
|
|
static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
|
|
|
|
u32 data;
|
|
|
|
|
|
|
|
data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
|
|
|
|
|
|
|
|
return !(data & BIT(offset));
|
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/*
|
|
|
|
* The calls to gpio_direction_output() and gpio_direction_input()
|
|
|
|
* leads to this function call (via the pinctrl_gpio_direction_{input|output}()
|
|
|
|
* function called from the gpiolib interface).
|
|
|
|
*/
|
2014-10-22 01:47:33 +08:00
|
|
|
static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
|
|
|
|
int pin, bool input)
|
2013-06-11 04:16:22 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pin_bank *bank;
|
2014-10-22 01:47:33 +08:00
|
|
|
int ret;
|
2014-10-22 01:47:35 +08:00
|
|
|
unsigned long flags;
|
2013-06-11 04:16:22 +08:00
|
|
|
u32 data;
|
|
|
|
|
2015-12-08 16:39:13 +08:00
|
|
|
bank = gpiochip_get_data(chip);
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2014-03-26 07:57:00 +08:00
|
|
|
ret = rockchip_set_mux(bank, pin, RK_FUNC_GPIO);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_enable(bank->clk);
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_lock_irqsave(&bank->slock, flags);
|
2014-10-22 01:47:35 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
|
|
|
|
/* set bit to 1 for output, 0 for input */
|
|
|
|
if (!input)
|
|
|
|
data |= BIT(pin);
|
|
|
|
else
|
|
|
|
data &= ~BIT(pin);
|
|
|
|
writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
|
|
|
|
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_unlock_irqrestore(&bank->slock, flags);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
2014-10-22 01:47:35 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-10-22 01:47:33 +08:00
|
|
|
static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
|
|
|
|
struct pinctrl_gpio_range *range,
|
|
|
|
unsigned offset, bool input)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
struct gpio_chip *chip;
|
|
|
|
int pin;
|
|
|
|
|
|
|
|
chip = range->gc;
|
|
|
|
pin = offset - chip->base;
|
|
|
|
dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n",
|
|
|
|
offset, range->name, pin, input ? "input" : "output");
|
|
|
|
|
|
|
|
return _rockchip_pmx_gpio_set_direction(chip, offset - chip->base,
|
|
|
|
input);
|
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static const struct pinmux_ops rockchip_pmx_ops = {
|
|
|
|
.get_functions_count = rockchip_pmx_get_funcs_count,
|
|
|
|
.get_function_name = rockchip_pmx_get_func_name,
|
|
|
|
.get_function_groups = rockchip_pmx_get_groups,
|
2014-09-03 19:02:56 +08:00
|
|
|
.set_mux = rockchip_pmx_set,
|
2013-06-11 04:16:22 +08:00
|
|
|
.gpio_set_direction = rockchip_pmx_gpio_set_direction,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Pinconf_ops handling
|
|
|
|
*/
|
|
|
|
|
2013-06-16 23:41:16 +08:00
|
|
|
static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
|
|
|
|
enum pin_config_param pull)
|
|
|
|
{
|
2013-10-16 07:07:20 +08:00
|
|
|
switch (ctrl->type) {
|
|
|
|
case RK2928:
|
2017-07-21 14:27:15 +08:00
|
|
|
case RK3128:
|
2013-10-16 07:07:20 +08:00
|
|
|
return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT ||
|
|
|
|
pull == PIN_CONFIG_BIAS_DISABLE);
|
|
|
|
case RK3066B:
|
2013-06-16 23:41:16 +08:00
|
|
|
return pull ? false : true;
|
2017-03-18 01:18:36 +08:00
|
|
|
case RV1108:
|
2013-10-16 07:07:20 +08:00
|
|
|
case RK3188:
|
2014-07-20 07:49:17 +08:00
|
|
|
case RK3288:
|
2015-06-13 05:51:01 +08:00
|
|
|
case RK3368:
|
2016-02-01 10:58:21 +08:00
|
|
|
case RK3399:
|
2013-10-16 07:07:20 +08:00
|
|
|
return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT);
|
2013-06-16 23:41:16 +08:00
|
|
|
}
|
|
|
|
|
2013-10-16 07:07:20 +08:00
|
|
|
return false;
|
2013-06-16 23:41:16 +08:00
|
|
|
}
|
|
|
|
|
2014-10-22 01:47:33 +08:00
|
|
|
static void rockchip_gpio_set(struct gpio_chip *gc, unsigned offset, int value);
|
2014-04-23 20:28:59 +08:00
|
|
|
static int rockchip_gpio_get(struct gpio_chip *gc, unsigned offset);
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
/* set the pin config settings for a specified pin */
|
|
|
|
static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
2013-08-28 02:32:12 +08:00
|
|
|
unsigned long *configs, unsigned num_configs)
|
2013-06-11 04:16:22 +08:00
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
struct rockchip_pin_bank *bank = pin_to_bank(info, pin);
|
2013-08-28 02:32:12 +08:00
|
|
|
enum pin_config_param param;
|
2017-01-23 20:34:32 +08:00
|
|
|
u32 arg;
|
2013-08-28 02:32:12 +08:00
|
|
|
int i;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
|
|
param = pinconf_to_config_param(configs[i]);
|
|
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
|
|
|
|
switch (param) {
|
|
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
|
|
rc = rockchip_set_pull(bank, pin - bank->pin_base,
|
|
|
|
param);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
|
|
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
|
2013-10-16 07:08:42 +08:00
|
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
2013-08-28 02:32:12 +08:00
|
|
|
if (!rockchip_pinconf_pull_valid(info->ctrl, param))
|
|
|
|
return -ENOTSUPP;
|
|
|
|
|
|
|
|
if (!arg)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
rc = rockchip_set_pull(bank, pin - bank->pin_base,
|
|
|
|
param);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
break;
|
2014-04-23 20:28:59 +08:00
|
|
|
case PIN_CONFIG_OUTPUT:
|
2014-10-22 01:47:33 +08:00
|
|
|
rockchip_gpio_set(&bank->gpio_chip,
|
|
|
|
pin - bank->pin_base, arg);
|
|
|
|
rc = _rockchip_pmx_gpio_set_direction(&bank->gpio_chip,
|
|
|
|
pin - bank->pin_base, false);
|
2014-04-23 20:28:59 +08:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
break;
|
2014-07-20 07:50:11 +08:00
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
|
|
/* rk3288 is the first with per-pin drive-strength */
|
2015-06-13 05:50:11 +08:00
|
|
|
if (!info->ctrl->drv_calc_reg)
|
2014-07-20 07:50:11 +08:00
|
|
|
return -ENOTSUPP;
|
|
|
|
|
2015-06-13 05:50:11 +08:00
|
|
|
rc = rockchip_set_drive_perpin(bank,
|
|
|
|
pin - bank->pin_base, arg);
|
2014-07-20 07:50:11 +08:00
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
break;
|
2017-03-02 15:11:23 +08:00
|
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
|
|
if (!info->ctrl->schmitt_calc_reg)
|
|
|
|
return -ENOTSUPP;
|
|
|
|
|
|
|
|
rc = rockchip_set_schmitt(bank,
|
|
|
|
pin - bank->pin_base, arg);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
break;
|
2013-08-28 02:32:12 +08:00
|
|
|
default:
|
2013-06-16 23:41:16 +08:00
|
|
|
return -ENOTSUPP;
|
2013-08-28 02:32:12 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
} /* for each config */
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* get the pin config settings for a specified pin */
|
|
|
|
static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
|
|
unsigned long *config)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
struct rockchip_pin_bank *bank = pin_to_bank(info, pin);
|
|
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
2014-04-23 20:27:51 +08:00
|
|
|
u16 arg;
|
2014-04-23 20:28:59 +08:00
|
|
|
int rc;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
switch (param) {
|
|
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
2013-06-16 23:41:16 +08:00
|
|
|
if (rockchip_get_pull(bank, pin - bank->pin_base) != param)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2014-04-23 20:27:51 +08:00
|
|
|
arg = 0;
|
2013-06-16 23:41:16 +08:00
|
|
|
break;
|
2013-06-11 04:16:22 +08:00
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
|
|
case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
|
2013-10-16 07:08:42 +08:00
|
|
|
case PIN_CONFIG_BIAS_BUS_HOLD:
|
2013-06-16 23:41:16 +08:00
|
|
|
if (!rockchip_pinconf_pull_valid(info->ctrl, param))
|
|
|
|
return -ENOTSUPP;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2013-06-16 23:41:16 +08:00
|
|
|
if (rockchip_get_pull(bank, pin - bank->pin_base) != param)
|
2013-06-11 04:16:22 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2014-04-23 20:27:51 +08:00
|
|
|
arg = 1;
|
2013-06-11 04:16:22 +08:00
|
|
|
break;
|
2014-04-23 20:28:59 +08:00
|
|
|
case PIN_CONFIG_OUTPUT:
|
|
|
|
rc = rockchip_get_mux(bank, pin - bank->pin_base);
|
|
|
|
if (rc != RK_FUNC_GPIO)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
rc = rockchip_gpio_get(&bank->gpio_chip, pin - bank->pin_base);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
arg = rc ? 1 : 0;
|
|
|
|
break;
|
2014-07-20 07:50:11 +08:00
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
|
|
/* rk3288 is the first with per-pin drive-strength */
|
2015-06-13 05:50:11 +08:00
|
|
|
if (!info->ctrl->drv_calc_reg)
|
2014-07-20 07:50:11 +08:00
|
|
|
return -ENOTSUPP;
|
|
|
|
|
2015-06-13 05:50:11 +08:00
|
|
|
rc = rockchip_get_drive_perpin(bank, pin - bank->pin_base);
|
2014-07-20 07:50:11 +08:00
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
2017-03-02 15:11:23 +08:00
|
|
|
arg = rc;
|
|
|
|
break;
|
|
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
|
|
if (!info->ctrl->schmitt_calc_reg)
|
|
|
|
return -ENOTSUPP;
|
|
|
|
|
|
|
|
rc = rockchip_get_schmitt(bank, pin - bank->pin_base);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
2014-07-20 07:50:11 +08:00
|
|
|
arg = rc;
|
|
|
|
break;
|
2013-06-11 04:16:22 +08:00
|
|
|
default:
|
|
|
|
return -ENOTSUPP;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2014-04-23 20:27:51 +08:00
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct pinconf_ops rockchip_pinconf_ops = {
|
|
|
|
.pin_config_get = rockchip_pinconf_get,
|
|
|
|
.pin_config_set = rockchip_pinconf_set,
|
2014-07-20 07:48:45 +08:00
|
|
|
.is_generic = true,
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
2013-10-16 07:07:49 +08:00
|
|
|
static const struct of_device_id rockchip_bank_match[] = {
|
|
|
|
{ .compatible = "rockchip,gpio-bank" },
|
2013-10-16 07:08:42 +08:00
|
|
|
{ .compatible = "rockchip,rk3188-gpio-bank0" },
|
2013-10-16 07:07:49 +08:00
|
|
|
{},
|
|
|
|
};
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
static void rockchip_pinctrl_child_count(struct rockchip_pinctrl *info,
|
|
|
|
struct device_node *np)
|
|
|
|
{
|
|
|
|
struct device_node *child;
|
|
|
|
|
|
|
|
for_each_child_of_node(np, child) {
|
2013-10-16 07:07:49 +08:00
|
|
|
if (of_match_node(rockchip_bank_match, child))
|
2013-06-11 04:16:22 +08:00
|
|
|
continue;
|
|
|
|
|
|
|
|
info->nfunctions++;
|
|
|
|
info->ngroups += of_get_child_count(child);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_pinctrl_parse_groups(struct device_node *np,
|
|
|
|
struct rockchip_pin_group *grp,
|
|
|
|
struct rockchip_pinctrl *info,
|
|
|
|
u32 index)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_bank *bank;
|
|
|
|
int size;
|
|
|
|
const __be32 *list;
|
|
|
|
int num;
|
|
|
|
int i, j;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
|
|
|
|
|
|
|
|
/* Initialise group */
|
|
|
|
grp->name = np->name;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* the binding format is rockchip,pins = <bank pin mux CONFIG>,
|
|
|
|
* do sanity check and calculate pins number
|
|
|
|
*/
|
|
|
|
list = of_get_property(np, "rockchip,pins", &size);
|
|
|
|
/* we do not check return since it's safe node passed down */
|
|
|
|
size /= sizeof(*list);
|
|
|
|
if (!size || size % 4) {
|
|
|
|
dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
grp->npins = size / 4;
|
|
|
|
|
|
|
|
grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
|
|
|
|
GFP_KERNEL);
|
|
|
|
grp->data = devm_kzalloc(info->dev, grp->npins *
|
|
|
|
sizeof(struct rockchip_pin_config),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!grp->pins || !grp->data)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (i = 0, j = 0; i < size; i += 4, j++) {
|
|
|
|
const __be32 *phandle;
|
|
|
|
struct device_node *np_config;
|
|
|
|
|
|
|
|
num = be32_to_cpu(*list++);
|
|
|
|
bank = bank_num_to_bank(info, num);
|
|
|
|
if (IS_ERR(bank))
|
|
|
|
return PTR_ERR(bank);
|
|
|
|
|
|
|
|
grp->pins[j] = bank->pin_base + be32_to_cpu(*list++);
|
|
|
|
grp->data[j].func = be32_to_cpu(*list++);
|
|
|
|
|
|
|
|
phandle = list++;
|
|
|
|
if (!phandle)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
np_config = of_find_node_by_phandle(be32_to_cpup(phandle));
|
2015-01-09 23:43:46 +08:00
|
|
|
ret = pinconf_generic_parse_dt_config(np_config, NULL,
|
2013-06-11 04:16:22 +08:00
|
|
|
&grp->data[j].configs, &grp->data[j].nconfigs);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_pinctrl_parse_functions(struct device_node *np,
|
|
|
|
struct rockchip_pinctrl *info,
|
|
|
|
u32 index)
|
|
|
|
{
|
|
|
|
struct device_node *child;
|
|
|
|
struct rockchip_pmx_func *func;
|
|
|
|
struct rockchip_pin_group *grp;
|
|
|
|
int ret;
|
|
|
|
static u32 grp_index;
|
|
|
|
u32 i = 0;
|
|
|
|
|
|
|
|
dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name);
|
|
|
|
|
|
|
|
func = &info->functions[index];
|
|
|
|
|
|
|
|
/* Initialise function */
|
|
|
|
func->name = np->name;
|
|
|
|
func->ngroups = of_get_child_count(np);
|
|
|
|
if (func->ngroups <= 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
func->groups = devm_kzalloc(info->dev,
|
|
|
|
func->ngroups * sizeof(char *), GFP_KERNEL);
|
|
|
|
if (!func->groups)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for_each_child_of_node(np, child) {
|
|
|
|
func->groups[i] = child->name;
|
|
|
|
grp = &info->groups[grp_index++];
|
|
|
|
ret = rockchip_pinctrl_parse_groups(child, grp, info, i++);
|
2015-12-22 00:39:47 +08:00
|
|
|
if (ret) {
|
|
|
|
of_node_put(child);
|
2013-06-11 04:16:22 +08:00
|
|
|
return ret;
|
2015-12-22 00:39:47 +08:00
|
|
|
}
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_pinctrl_parse_dt(struct platform_device *pdev,
|
|
|
|
struct rockchip_pinctrl *info)
|
|
|
|
{
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct device_node *np = dev->of_node;
|
|
|
|
struct device_node *child;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
rockchip_pinctrl_child_count(info, np);
|
|
|
|
|
|
|
|
dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
|
|
|
|
dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
|
|
|
|
|
|
|
|
info->functions = devm_kzalloc(dev, info->nfunctions *
|
|
|
|
sizeof(struct rockchip_pmx_func),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!info->functions) {
|
|
|
|
dev_err(dev, "failed to allocate memory for function list\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->groups = devm_kzalloc(dev, info->ngroups *
|
|
|
|
sizeof(struct rockchip_pin_group),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!info->groups) {
|
|
|
|
dev_err(dev, "failed allocate memory for ping group list\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
i = 0;
|
|
|
|
|
|
|
|
for_each_child_of_node(np, child) {
|
2013-10-16 07:07:49 +08:00
|
|
|
if (of_match_node(rockchip_bank_match, child))
|
2013-06-11 04:16:22 +08:00
|
|
|
continue;
|
2013-10-16 07:07:49 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
ret = rockchip_pinctrl_parse_functions(child, info, i++);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "failed to parse function\n");
|
2015-12-22 00:39:47 +08:00
|
|
|
of_node_put(child);
|
2013-06-11 04:16:22 +08:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_pinctrl_register(struct platform_device *pdev,
|
|
|
|
struct rockchip_pinctrl *info)
|
|
|
|
{
|
|
|
|
struct pinctrl_desc *ctrldesc = &info->pctl;
|
|
|
|
struct pinctrl_pin_desc *pindesc, *pdesc;
|
|
|
|
struct rockchip_pin_bank *pin_bank;
|
|
|
|
int pin, bank, ret;
|
|
|
|
int k;
|
|
|
|
|
|
|
|
ctrldesc->name = "rockchip-pinctrl";
|
|
|
|
ctrldesc->owner = THIS_MODULE;
|
|
|
|
ctrldesc->pctlops = &rockchip_pctrl_ops;
|
|
|
|
ctrldesc->pmxops = &rockchip_pmx_ops;
|
|
|
|
ctrldesc->confops = &rockchip_pinconf_ops;
|
|
|
|
|
|
|
|
pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
|
|
|
|
info->ctrl->nr_pins, GFP_KERNEL);
|
|
|
|
if (!pindesc) {
|
|
|
|
dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
ctrldesc->pins = pindesc;
|
|
|
|
ctrldesc->npins = info->ctrl->nr_pins;
|
|
|
|
|
|
|
|
pdesc = pindesc;
|
|
|
|
for (bank = 0 , k = 0; bank < info->ctrl->nr_banks; bank++) {
|
|
|
|
pin_bank = &info->ctrl->pin_banks[bank];
|
|
|
|
for (pin = 0; pin < pin_bank->nr_pins; pin++, k++) {
|
|
|
|
pdesc->number = k;
|
|
|
|
pdesc->name = kasprintf(GFP_KERNEL, "%s-%d",
|
|
|
|
pin_bank->name, pin);
|
|
|
|
pdesc++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-10-22 01:47:34 +08:00
|
|
|
ret = rockchip_pinctrl_parse_dt(pdev, info);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2016-02-24 17:14:07 +08:00
|
|
|
info->pctl_dev = devm_pinctrl_register(&pdev->dev, ctrldesc, info);
|
2015-06-09 12:01:16 +08:00
|
|
|
if (IS_ERR(info->pctl_dev)) {
|
2013-06-11 04:16:22 +08:00
|
|
|
dev_err(&pdev->dev, "could not register pinctrl driver\n");
|
2015-06-09 12:01:16 +08:00
|
|
|
return PTR_ERR(info->pctl_dev);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
for (bank = 0; bank < info->ctrl->nr_banks; ++bank) {
|
|
|
|
pin_bank = &info->ctrl->pin_banks[bank];
|
|
|
|
pin_bank->grange.name = pin_bank->name;
|
|
|
|
pin_bank->grange.id = bank;
|
|
|
|
pin_bank->grange.pin_base = pin_bank->pin_base;
|
|
|
|
pin_bank->grange.base = pin_bank->gpio_chip.base;
|
|
|
|
pin_bank->grange.npins = pin_bank->gpio_chip.ngpio;
|
|
|
|
pin_bank->grange.gc = &pin_bank->gpio_chip;
|
|
|
|
pinctrl_add_gpio_range(info->pctl_dev, &pin_bank->grange);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* GPIO handling
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void rockchip_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
|
|
|
|
{
|
2015-12-08 16:39:13 +08:00
|
|
|
struct rockchip_pin_bank *bank = gpiochip_get_data(gc);
|
2013-06-11 04:16:22 +08:00
|
|
|
void __iomem *reg = bank->reg_base + GPIO_SWPORT_DR;
|
|
|
|
unsigned long flags;
|
|
|
|
u32 data;
|
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_enable(bank->clk);
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_lock_irqsave(&bank->slock, flags);
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
data = readl(reg);
|
|
|
|
data &= ~BIT(offset);
|
|
|
|
if (value)
|
|
|
|
data |= BIT(offset);
|
|
|
|
writel(data, reg);
|
|
|
|
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_unlock_irqrestore(&bank->slock, flags);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Returns the level of the pin for input direction and setting of the DR
|
|
|
|
* register for output gpios.
|
|
|
|
*/
|
|
|
|
static int rockchip_gpio_get(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
2015-12-08 16:39:13 +08:00
|
|
|
struct rockchip_pin_bank *bank = gpiochip_get_data(gc);
|
2013-06-11 04:16:22 +08:00
|
|
|
u32 data;
|
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_enable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
data = readl(bank->reg_base + GPIO_EXT_PORT);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
data >>= offset;
|
|
|
|
data &= 1;
|
|
|
|
return data;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* gpiolib gpio_direction_input callback function. The setting of the pin
|
|
|
|
* mux function as 'gpio input' will be handled by the pinctrl susbsystem
|
|
|
|
* interface.
|
|
|
|
*/
|
|
|
|
static int rockchip_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
|
|
|
return pinctrl_gpio_direction_input(gc->base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* gpiolib gpio_direction_output callback function. The setting of the pin
|
|
|
|
* mux function as 'gpio output' will be handled by the pinctrl susbsystem
|
|
|
|
* interface.
|
|
|
|
*/
|
|
|
|
static int rockchip_gpio_direction_output(struct gpio_chip *gc,
|
|
|
|
unsigned offset, int value)
|
|
|
|
{
|
|
|
|
rockchip_gpio_set(gc, offset, value);
|
|
|
|
return pinctrl_gpio_direction_output(gc->base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* gpiolib gpio_to_irq callback function. Creates a mapping between a GPIO pin
|
|
|
|
* and a virtual IRQ, if not already present.
|
|
|
|
*/
|
|
|
|
static int rockchip_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
|
|
|
|
{
|
2015-12-08 16:39:13 +08:00
|
|
|
struct rockchip_pin_bank *bank = gpiochip_get_data(gc);
|
2013-06-11 04:16:22 +08:00
|
|
|
unsigned int virq;
|
|
|
|
|
|
|
|
if (!bank->domain)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
virq = irq_create_mapping(bank->domain, offset);
|
|
|
|
|
|
|
|
return (virq) ? : -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct gpio_chip rockchip_gpiolib_chip = {
|
2015-10-11 23:34:19 +08:00
|
|
|
.request = gpiochip_generic_request,
|
|
|
|
.free = gpiochip_generic_free,
|
2013-06-11 04:16:22 +08:00
|
|
|
.set = rockchip_gpio_set,
|
|
|
|
.get = rockchip_gpio_get,
|
2016-03-15 15:55:45 +08:00
|
|
|
.get_direction = rockchip_gpio_get_direction,
|
2013-06-11 04:16:22 +08:00
|
|
|
.direction_input = rockchip_gpio_direction_input,
|
|
|
|
.direction_output = rockchip_gpio_direction_output,
|
|
|
|
.to_irq = rockchip_gpio_to_irq,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interrupt handling
|
|
|
|
*/
|
|
|
|
|
2015-09-14 16:42:37 +08:00
|
|
|
static void rockchip_irq_demux(struct irq_desc *desc)
|
2013-06-11 04:16:22 +08:00
|
|
|
{
|
2015-06-04 12:13:16 +08:00
|
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
|
|
struct rockchip_pin_bank *bank = irq_desc_get_handler_data(desc);
|
2013-06-11 04:16:22 +08:00
|
|
|
u32 pend;
|
|
|
|
|
|
|
|
dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
|
|
|
|
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
|
|
|
|
pend = readl_relaxed(bank->reg_base + GPIO_INT_STATUS);
|
|
|
|
|
|
|
|
while (pend) {
|
2015-07-13 07:52:00 +08:00
|
|
|
unsigned int irq, virq;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
irq = __ffs(pend);
|
|
|
|
pend &= ~BIT(irq);
|
|
|
|
virq = irq_linear_revmap(bank->domain, irq);
|
|
|
|
|
|
|
|
if (!virq) {
|
|
|
|
dev_err(bank->drvdata->dev, "unmapped irq %d\n", irq);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(bank->drvdata->dev, "handling irq %d\n", irq);
|
|
|
|
|
2013-10-16 07:09:08 +08:00
|
|
|
/*
|
|
|
|
* Triggering IRQ on both rising and falling edge
|
|
|
|
* needs manual intervention.
|
|
|
|
*/
|
|
|
|
if (bank->toggle_edge_mode & BIT(irq)) {
|
2014-12-23 02:47:29 +08:00
|
|
|
u32 data, data_old, polarity;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
data = readl_relaxed(bank->reg_base + GPIO_EXT_PORT);
|
|
|
|
do {
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_lock_irqsave(&bank->slock, flags);
|
2014-12-23 02:47:29 +08:00
|
|
|
|
|
|
|
polarity = readl_relaxed(bank->reg_base +
|
|
|
|
GPIO_INT_POLARITY);
|
|
|
|
if (data & BIT(irq))
|
|
|
|
polarity &= ~BIT(irq);
|
|
|
|
else
|
|
|
|
polarity |= BIT(irq);
|
|
|
|
writel(polarity,
|
|
|
|
bank->reg_base + GPIO_INT_POLARITY);
|
|
|
|
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_unlock_irqrestore(&bank->slock, flags);
|
2014-12-23 02:47:29 +08:00
|
|
|
|
|
|
|
data_old = data;
|
|
|
|
data = readl_relaxed(bank->reg_base +
|
|
|
|
GPIO_EXT_PORT);
|
|
|
|
} while ((data & BIT(irq)) != (data_old & BIT(irq)));
|
2013-10-16 07:09:08 +08:00
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
generic_handle_irq(virq);
|
|
|
|
}
|
|
|
|
|
|
|
|
chained_irq_exit(chip, desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
|
|
|
|
{
|
|
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
|
|
struct rockchip_pin_bank *bank = gc->private;
|
|
|
|
u32 mask = BIT(d->hwirq);
|
|
|
|
u32 polarity;
|
|
|
|
u32 level;
|
|
|
|
u32 data;
|
2014-10-22 01:47:35 +08:00
|
|
|
unsigned long flags;
|
2014-03-26 07:57:00 +08:00
|
|
|
int ret;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2013-10-16 07:09:08 +08:00
|
|
|
/* make sure the pin is configured as gpio input */
|
2017-06-24 04:59:11 +08:00
|
|
|
ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
|
2014-03-26 07:57:00 +08:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2017-06-24 04:59:11 +08:00
|
|
|
clk_enable(bank->clk);
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_lock_irqsave(&bank->slock, flags);
|
2014-10-22 01:47:35 +08:00
|
|
|
|
2013-10-16 07:09:08 +08:00
|
|
|
data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
|
|
|
|
data &= ~mask;
|
|
|
|
writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
|
|
|
|
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_unlock_irqrestore(&bank->slock, flags);
|
2014-10-22 01:47:35 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
if (type & IRQ_TYPE_EDGE_BOTH)
|
2015-06-23 21:52:50 +08:00
|
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
2013-06-11 04:16:22 +08:00
|
|
|
else
|
2015-06-23 21:52:50 +08:00
|
|
|
irq_set_handler_locked(d, handle_level_irq);
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_lock_irqsave(&bank->slock, flags);
|
2013-06-11 04:16:22 +08:00
|
|
|
irq_gc_lock(gc);
|
|
|
|
|
|
|
|
level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL);
|
|
|
|
polarity = readl_relaxed(gc->reg_base + GPIO_INT_POLARITY);
|
|
|
|
|
|
|
|
switch (type) {
|
2013-10-16 07:09:08 +08:00
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
|
|
bank->toggle_edge_mode |= mask;
|
|
|
|
level |= mask;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Determine gpio state. If 1 next interrupt should be falling
|
|
|
|
* otherwise rising.
|
|
|
|
*/
|
|
|
|
data = readl(bank->reg_base + GPIO_EXT_PORT);
|
|
|
|
if (data & mask)
|
|
|
|
polarity &= ~mask;
|
|
|
|
else
|
|
|
|
polarity |= mask;
|
|
|
|
break;
|
2013-06-11 04:16:22 +08:00
|
|
|
case IRQ_TYPE_EDGE_RISING:
|
2013-10-16 07:09:08 +08:00
|
|
|
bank->toggle_edge_mode &= ~mask;
|
2013-06-11 04:16:22 +08:00
|
|
|
level |= mask;
|
|
|
|
polarity |= mask;
|
|
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
2013-10-16 07:09:08 +08:00
|
|
|
bank->toggle_edge_mode &= ~mask;
|
2013-06-11 04:16:22 +08:00
|
|
|
level |= mask;
|
|
|
|
polarity &= ~mask;
|
|
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
2013-10-16 07:09:08 +08:00
|
|
|
bank->toggle_edge_mode &= ~mask;
|
2013-06-11 04:16:22 +08:00
|
|
|
level &= ~mask;
|
|
|
|
polarity |= mask;
|
|
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
2013-10-16 07:09:08 +08:00
|
|
|
bank->toggle_edge_mode &= ~mask;
|
2013-06-11 04:16:22 +08:00
|
|
|
level &= ~mask;
|
|
|
|
polarity &= ~mask;
|
|
|
|
break;
|
|
|
|
default:
|
2013-06-23 08:48:34 +08:00
|
|
|
irq_gc_unlock(gc);
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_unlock_irqrestore(&bank->slock, flags);
|
2017-06-24 04:59:11 +08:00
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
writel_relaxed(level, gc->reg_base + GPIO_INTTYPE_LEVEL);
|
|
|
|
writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY);
|
|
|
|
|
|
|
|
irq_gc_unlock(gc);
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_unlock_irqrestore(&bank->slock, flags);
|
2017-06-24 04:59:11 +08:00
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-11-20 06:51:32 +08:00
|
|
|
static void rockchip_irq_suspend(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
|
|
struct rockchip_pin_bank *bank = gc->private;
|
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_enable(bank->clk);
|
2015-01-27 00:24:03 +08:00
|
|
|
bank->saved_masks = irq_reg_readl(gc, GPIO_INTMASK);
|
|
|
|
irq_reg_writel(gc, ~gc->wake_active, GPIO_INTMASK);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
2014-11-20 06:51:32 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void rockchip_irq_resume(struct irq_data *d)
|
|
|
|
{
|
|
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
|
|
struct rockchip_pin_bank *bank = gc->private;
|
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_enable(bank->clk);
|
2015-01-27 00:24:03 +08:00
|
|
|
irq_reg_writel(gc, bank->saved_masks, GPIO_INTMASK);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
|
|
|
}
|
|
|
|
|
2017-03-02 13:56:52 +08:00
|
|
|
static void rockchip_irq_enable(struct irq_data *d)
|
2015-08-11 18:12:04 +08:00
|
|
|
{
|
|
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
|
|
struct rockchip_pin_bank *bank = gc->private;
|
|
|
|
|
|
|
|
clk_enable(bank->clk);
|
|
|
|
irq_gc_mask_clr_bit(d);
|
|
|
|
}
|
|
|
|
|
2017-03-02 13:56:52 +08:00
|
|
|
static void rockchip_irq_disable(struct irq_data *d)
|
2015-08-11 18:12:04 +08:00
|
|
|
{
|
|
|
|
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
|
|
|
|
struct rockchip_pin_bank *bank = gc->private;
|
|
|
|
|
|
|
|
irq_gc_mask_set_bit(d);
|
|
|
|
clk_disable(bank->clk);
|
2014-11-20 06:51:33 +08:00
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static int rockchip_interrupts_register(struct platform_device *pdev,
|
|
|
|
struct rockchip_pinctrl *info)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct rockchip_pin_bank *bank = ctrl->pin_banks;
|
|
|
|
unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
|
|
|
|
struct irq_chip_generic *gc;
|
|
|
|
int ret;
|
2015-08-11 18:12:04 +08:00
|
|
|
int i, j;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
|
|
if (!bank->valid) {
|
|
|
|
dev_warn(&pdev->dev, "bank %s is not valid\n",
|
|
|
|
bank->name);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
ret = clk_enable(bank->clk);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "failed to enable clock for bank %s\n",
|
|
|
|
bank->name);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
bank->domain = irq_domain_add_linear(bank->of_node, 32,
|
|
|
|
&irq_generic_chip_ops, NULL);
|
|
|
|
if (!bank->domain) {
|
|
|
|
dev_warn(&pdev->dev, "could not initialize irq domain for bank %s\n",
|
|
|
|
bank->name);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1,
|
|
|
|
"rockchip_gpio_irq", handle_level_irq,
|
|
|
|
clr, 0, IRQ_GC_INIT_MASK_CACHE);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "could not alloc generic chips for bank %s\n",
|
|
|
|
bank->name);
|
|
|
|
irq_domain_remove(bank->domain);
|
2015-08-11 18:12:04 +08:00
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2015-01-27 00:24:03 +08:00
|
|
|
/*
|
|
|
|
* Linux assumes that all interrupts start out disabled/masked.
|
|
|
|
* Our driver only uses the concept of masked and always keeps
|
|
|
|
* things enabled, so for us that's all masked and all enabled.
|
|
|
|
*/
|
|
|
|
writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTMASK);
|
|
|
|
writel_relaxed(0xffffffff, bank->reg_base + GPIO_INTEN);
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
gc = irq_get_domain_generic_chip(bank->domain, 0);
|
|
|
|
gc->reg_base = bank->reg_base;
|
|
|
|
gc->private = bank;
|
2014-11-20 06:51:33 +08:00
|
|
|
gc->chip_types[0].regs.mask = GPIO_INTMASK;
|
2013-06-11 04:16:22 +08:00
|
|
|
gc->chip_types[0].regs.ack = GPIO_PORTS_EOI;
|
|
|
|
gc->chip_types[0].chip.irq_ack = irq_gc_ack_set_bit;
|
2017-03-02 13:56:52 +08:00
|
|
|
gc->chip_types[0].chip.irq_mask = irq_gc_mask_set_bit;
|
|
|
|
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_clr_bit;
|
|
|
|
gc->chip_types[0].chip.irq_enable = rockchip_irq_enable;
|
|
|
|
gc->chip_types[0].chip.irq_disable = rockchip_irq_disable;
|
2013-06-11 04:16:22 +08:00
|
|
|
gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake;
|
2014-11-20 06:51:32 +08:00
|
|
|
gc->chip_types[0].chip.irq_suspend = rockchip_irq_suspend;
|
|
|
|
gc->chip_types[0].chip.irq_resume = rockchip_irq_resume;
|
2013-06-11 04:16:22 +08:00
|
|
|
gc->chip_types[0].chip.irq_set_type = rockchip_irq_set_type;
|
2014-10-22 01:47:32 +08:00
|
|
|
gc->wake_enabled = IRQ_MSK(bank->nr_pins);
|
2013-06-11 04:16:22 +08:00
|
|
|
|
2015-06-22 03:11:06 +08:00
|
|
|
irq_set_chained_handler_and_data(bank->irq,
|
|
|
|
rockchip_irq_demux, bank);
|
2015-08-11 18:12:04 +08:00
|
|
|
|
|
|
|
/* map the gpio irqs here, when the clock is still running */
|
|
|
|
for (j = 0 ; j < 32 ; j++)
|
|
|
|
irq_create_mapping(bank->domain, j);
|
|
|
|
|
|
|
|
clk_disable(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_gpiolib_register(struct platform_device *pdev,
|
|
|
|
struct rockchip_pinctrl *info)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct rockchip_pin_bank *bank = ctrl->pin_banks;
|
|
|
|
struct gpio_chip *gc;
|
|
|
|
int ret;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
|
|
if (!bank->valid) {
|
|
|
|
dev_warn(&pdev->dev, "bank %s is not valid\n",
|
|
|
|
bank->name);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
bank->gpio_chip = rockchip_gpiolib_chip;
|
|
|
|
|
|
|
|
gc = &bank->gpio_chip;
|
|
|
|
gc->base = bank->pin_base;
|
|
|
|
gc->ngpio = bank->nr_pins;
|
2015-11-04 16:56:26 +08:00
|
|
|
gc->parent = &pdev->dev;
|
2013-06-11 04:16:22 +08:00
|
|
|
gc->of_node = bank->of_node;
|
|
|
|
gc->label = bank->name;
|
|
|
|
|
2015-12-08 16:39:13 +08:00
|
|
|
ret = gpiochip_add_data(gc, bank);
|
2013-06-11 04:16:22 +08:00
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "failed to register gpio_chip %s, error code: %d\n",
|
|
|
|
gc->label, ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
rockchip_interrupts_register(pdev, info);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail:
|
|
|
|
for (--i, --bank; i >= 0; --i, --bank) {
|
|
|
|
if (!bank->valid)
|
|
|
|
continue;
|
2014-07-13 04:30:13 +08:00
|
|
|
gpiochip_remove(&bank->gpio_chip);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_gpiolib_unregister(struct platform_device *pdev,
|
|
|
|
struct rockchip_pinctrl *info)
|
|
|
|
{
|
|
|
|
struct rockchip_pin_ctrl *ctrl = info->ctrl;
|
|
|
|
struct rockchip_pin_bank *bank = ctrl->pin_banks;
|
|
|
|
int i;
|
|
|
|
|
2014-07-13 04:30:13 +08:00
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
2013-06-11 04:16:22 +08:00
|
|
|
if (!bank->valid)
|
|
|
|
continue;
|
2014-07-13 04:30:13 +08:00
|
|
|
gpiochip_remove(&bank->gpio_chip);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
2014-07-13 04:30:13 +08:00
|
|
|
return 0;
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
|
2014-05-05 19:58:46 +08:00
|
|
|
struct rockchip_pinctrl *info)
|
2013-06-11 04:16:22 +08:00
|
|
|
{
|
|
|
|
struct resource res;
|
2014-05-05 19:58:20 +08:00
|
|
|
void __iomem *base;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
if (of_address_to_resource(bank->of_node, 0, &res)) {
|
2014-05-05 19:58:46 +08:00
|
|
|
dev_err(info->dev, "cannot find IO resource for bank\n");
|
2013-06-11 04:16:22 +08:00
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
2014-05-05 19:58:46 +08:00
|
|
|
bank->reg_base = devm_ioremap_resource(info->dev, &res);
|
2013-06-11 04:16:22 +08:00
|
|
|
if (IS_ERR(bank->reg_base))
|
|
|
|
return PTR_ERR(bank->reg_base);
|
|
|
|
|
2013-10-16 07:08:42 +08:00
|
|
|
/*
|
|
|
|
* special case, where parts of the pull setting-registers are
|
|
|
|
* part of the PMU register space
|
|
|
|
*/
|
|
|
|
if (of_device_is_compatible(bank->of_node,
|
|
|
|
"rockchip,rk3188-gpio-bank0")) {
|
2014-05-05 19:59:30 +08:00
|
|
|
struct device_node *node;
|
2014-05-05 19:58:00 +08:00
|
|
|
|
2014-05-05 19:59:30 +08:00
|
|
|
node = of_parse_phandle(bank->of_node->parent,
|
|
|
|
"rockchip,pmu", 0);
|
|
|
|
if (!node) {
|
|
|
|
if (of_address_to_resource(bank->of_node, 1, &res)) {
|
|
|
|
dev_err(info->dev, "cannot find IO resource for bank\n");
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
base = devm_ioremap_resource(info->dev, &res);
|
|
|
|
if (IS_ERR(base))
|
|
|
|
return PTR_ERR(base);
|
|
|
|
rockchip_regmap_config.max_register =
|
|
|
|
resource_size(&res) - 4;
|
|
|
|
rockchip_regmap_config.name =
|
|
|
|
"rockchip,rk3188-gpio-bank0-pull";
|
|
|
|
bank->regmap_pull = devm_regmap_init_mmio(info->dev,
|
|
|
|
base,
|
|
|
|
&rockchip_regmap_config);
|
2013-10-16 07:08:42 +08:00
|
|
|
}
|
|
|
|
}
|
2013-10-16 07:07:49 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
bank->irq = irq_of_parse_and_map(bank->of_node, 0);
|
|
|
|
|
|
|
|
bank->clk = of_clk_get(bank->of_node, 0);
|
|
|
|
if (IS_ERR(bank->clk))
|
|
|
|
return PTR_ERR(bank->clk);
|
|
|
|
|
2015-08-11 18:12:04 +08:00
|
|
|
return clk_prepare(bank->clk);
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id rockchip_pinctrl_dt_match[];
|
|
|
|
|
|
|
|
/* retrieve the soc specific data */
|
|
|
|
static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(
|
|
|
|
struct rockchip_pinctrl *d,
|
|
|
|
struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
const struct of_device_id *match;
|
|
|
|
struct device_node *node = pdev->dev.of_node;
|
|
|
|
struct device_node *np;
|
|
|
|
struct rockchip_pin_ctrl *ctrl;
|
|
|
|
struct rockchip_pin_bank *bank;
|
2016-02-01 10:58:21 +08:00
|
|
|
int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j;
|
2013-06-11 04:16:22 +08:00
|
|
|
|
|
|
|
match = of_match_node(rockchip_pinctrl_dt_match, node);
|
|
|
|
ctrl = (struct rockchip_pin_ctrl *)match->data;
|
|
|
|
|
|
|
|
for_each_child_of_node(node, np) {
|
|
|
|
if (!of_find_property(np, "gpio-controller", NULL))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
bank = ctrl->pin_banks;
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
|
|
|
if (!strcmp(bank->name, np->name)) {
|
|
|
|
bank->of_node = np;
|
|
|
|
|
2014-05-05 19:58:46 +08:00
|
|
|
if (!rockchip_get_bank_data(bank, d))
|
2013-06-11 04:16:22 +08:00
|
|
|
bank->valid = true;
|
|
|
|
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-06-16 07:37:23 +08:00
|
|
|
grf_offs = ctrl->grf_mux_offset;
|
|
|
|
pmu_offs = ctrl->pmu_mux_offset;
|
2016-02-01 10:58:21 +08:00
|
|
|
drv_pmu_offs = ctrl->pmu_drv_offset;
|
|
|
|
drv_grf_offs = ctrl->grf_drv_offset;
|
2013-06-11 04:16:22 +08:00
|
|
|
bank = ctrl->pin_banks;
|
|
|
|
for (i = 0; i < ctrl->nr_banks; ++i, ++bank) {
|
2014-06-16 07:36:33 +08:00
|
|
|
int bank_pins = 0;
|
|
|
|
|
2017-03-23 18:59:29 +08:00
|
|
|
raw_spin_lock_init(&bank->slock);
|
2013-06-11 04:16:22 +08:00
|
|
|
bank->drvdata = d;
|
|
|
|
bank->pin_base = ctrl->nr_pins;
|
|
|
|
ctrl->nr_pins += bank->nr_pins;
|
2014-06-16 07:36:33 +08:00
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
/* calculate iomux and drv offsets */
|
2014-06-16 07:36:33 +08:00
|
|
|
for (j = 0; j < 4; j++) {
|
|
|
|
struct rockchip_iomux *iom = &bank->iomux[j];
|
2016-02-01 10:58:21 +08:00
|
|
|
struct rockchip_drv *drv = &bank->drv[j];
|
2014-06-16 07:36:57 +08:00
|
|
|
int inc;
|
2014-06-16 07:36:33 +08:00
|
|
|
|
|
|
|
if (bank_pins >= bank->nr_pins)
|
|
|
|
break;
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
/* preset iomux offset value, set new start value */
|
2014-06-16 07:36:33 +08:00
|
|
|
if (iom->offset >= 0) {
|
2014-06-16 07:37:23 +08:00
|
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
|
|
pmu_offs = iom->offset;
|
|
|
|
else
|
|
|
|
grf_offs = iom->offset;
|
2016-02-01 10:58:21 +08:00
|
|
|
} else { /* set current iomux offset */
|
2014-06-16 07:37:23 +08:00
|
|
|
iom->offset = (iom->type & IOMUX_SOURCE_PMU) ?
|
|
|
|
pmu_offs : grf_offs;
|
2014-06-16 07:36:33 +08:00
|
|
|
}
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
/* preset drv offset value, set new start value */
|
|
|
|
if (drv->offset >= 0) {
|
|
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
|
|
drv_pmu_offs = drv->offset;
|
|
|
|
else
|
|
|
|
drv_grf_offs = drv->offset;
|
|
|
|
} else { /* set current drv offset */
|
|
|
|
drv->offset = (iom->type & IOMUX_SOURCE_PMU) ?
|
|
|
|
drv_pmu_offs : drv_grf_offs;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(d->dev, "bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n",
|
|
|
|
i, j, iom->offset, drv->offset);
|
2014-06-16 07:36:33 +08:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Increase offset according to iomux width.
|
2014-06-16 07:36:57 +08:00
|
|
|
* 4bit iomux'es are spread over two registers.
|
2014-06-16 07:36:33 +08:00
|
|
|
*/
|
2017-02-10 18:23:47 +08:00
|
|
|
inc = (iom->type & (IOMUX_WIDTH_4BIT |
|
|
|
|
IOMUX_WIDTH_3BIT)) ? 8 : 4;
|
2014-06-16 07:37:23 +08:00
|
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
|
|
pmu_offs += inc;
|
|
|
|
else
|
|
|
|
grf_offs += inc;
|
2014-06-16 07:36:33 +08:00
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
/*
|
|
|
|
* Increase offset according to drv width.
|
|
|
|
* 3bit drive-strenth'es are spread over two registers.
|
|
|
|
*/
|
|
|
|
if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) ||
|
|
|
|
(drv->drv_type == DRV_TYPE_IO_3V3_ONLY))
|
|
|
|
inc = 8;
|
|
|
|
else
|
|
|
|
inc = 4;
|
|
|
|
|
|
|
|
if (iom->type & IOMUX_SOURCE_PMU)
|
|
|
|
drv_pmu_offs += inc;
|
|
|
|
else
|
|
|
|
drv_grf_offs += inc;
|
|
|
|
|
2014-06-16 07:36:33 +08:00
|
|
|
bank_pins += 8;
|
|
|
|
}
|
2017-05-26 15:20:20 +08:00
|
|
|
|
2017-07-21 14:27:14 +08:00
|
|
|
/* calculate the per-bank recalced_mask */
|
|
|
|
for (j = 0; j < ctrl->niomux_recalced; j++) {
|
|
|
|
int pin = 0;
|
|
|
|
|
|
|
|
if (ctrl->iomux_recalced[j].num == bank->bank_num) {
|
|
|
|
pin = ctrl->iomux_recalced[j].pin;
|
|
|
|
bank->recalced_mask |= BIT(pin);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-05-26 15:20:20 +08:00
|
|
|
/* calculate the per-bank route_mask */
|
|
|
|
for (j = 0; j < ctrl->niomux_routes; j++) {
|
|
|
|
int pin = 0;
|
|
|
|
|
|
|
|
if (ctrl->iomux_routes[j].bank_num == bank->bank_num) {
|
|
|
|
pin = ctrl->iomux_routes[j].pin;
|
|
|
|
bank->route_mask |= BIT(pin);
|
|
|
|
}
|
|
|
|
}
|
2013-06-11 04:16:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return ctrl;
|
|
|
|
}
|
|
|
|
|
2014-10-29 19:52:00 +08:00
|
|
|
#define RK3288_GRF_GPIO6C_IOMUX 0x64
|
|
|
|
#define GPIO6C6_SEL_WRITE_ENABLE BIT(28)
|
|
|
|
|
|
|
|
static u32 rk3288_grf_gpio6c_iomux;
|
|
|
|
|
2014-10-29 19:51:59 +08:00
|
|
|
static int __maybe_unused rockchip_pinctrl_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = dev_get_drvdata(dev);
|
2014-10-29 19:52:00 +08:00
|
|
|
int ret = pinctrl_force_sleep(info->pctl_dev);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* RK3288 GPIO6_C6 mux would be modified by Maskrom when resume, so save
|
|
|
|
* the setting here, and restore it at resume.
|
|
|
|
*/
|
|
|
|
if (info->ctrl->type == RK3288) {
|
|
|
|
ret = regmap_read(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX,
|
|
|
|
&rk3288_grf_gpio6c_iomux);
|
|
|
|
if (ret) {
|
|
|
|
pinctrl_force_default(info->pctl_dev);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
2014-10-29 19:51:59 +08:00
|
|
|
|
2014-10-29 19:52:00 +08:00
|
|
|
return 0;
|
2014-10-29 19:51:59 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int __maybe_unused rockchip_pinctrl_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info = dev_get_drvdata(dev);
|
2014-10-29 19:52:00 +08:00
|
|
|
int ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX,
|
|
|
|
rk3288_grf_gpio6c_iomux |
|
|
|
|
GPIO6C6_SEL_WRITE_ENABLE);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
2014-10-29 19:51:59 +08:00
|
|
|
|
|
|
|
return pinctrl_force_default(info->pctl_dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static SIMPLE_DEV_PM_OPS(rockchip_pinctrl_dev_pm_ops, rockchip_pinctrl_suspend,
|
|
|
|
rockchip_pinctrl_resume);
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static int rockchip_pinctrl_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct rockchip_pinctrl *info;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct rockchip_pin_ctrl *ctrl;
|
2014-05-05 19:59:09 +08:00
|
|
|
struct device_node *np = pdev->dev.of_node, *node;
|
2013-06-11 04:16:22 +08:00
|
|
|
struct resource *res;
|
2014-05-05 19:58:20 +08:00
|
|
|
void __iomem *base;
|
2013-06-11 04:16:22 +08:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!dev->of_node) {
|
|
|
|
dev_err(dev, "device tree node not found\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
info = devm_kzalloc(dev, sizeof(struct rockchip_pinctrl), GFP_KERNEL);
|
|
|
|
if (!info)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2014-05-05 19:58:46 +08:00
|
|
|
info->dev = dev;
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
ctrl = rockchip_pinctrl_get_soc_data(info, pdev);
|
|
|
|
if (!ctrl) {
|
|
|
|
dev_err(dev, "driver data not available\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
info->ctrl = ctrl;
|
|
|
|
|
2014-05-05 19:59:51 +08:00
|
|
|
node = of_parse_phandle(np, "rockchip,grf", 0);
|
|
|
|
if (node) {
|
|
|
|
info->regmap_base = syscon_node_to_regmap(node);
|
|
|
|
if (IS_ERR(info->regmap_base))
|
|
|
|
return PTR_ERR(info->regmap_base);
|
|
|
|
} else {
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
2014-05-05 19:58:20 +08:00
|
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(base))
|
|
|
|
return PTR_ERR(base);
|
|
|
|
|
|
|
|
rockchip_regmap_config.max_register = resource_size(res) - 4;
|
2014-05-05 19:59:51 +08:00
|
|
|
rockchip_regmap_config.name = "rockchip,pinctrl";
|
|
|
|
info->regmap_base = devm_regmap_init_mmio(&pdev->dev, base,
|
|
|
|
&rockchip_regmap_config);
|
|
|
|
|
|
|
|
/* to check for the old dt-bindings */
|
|
|
|
info->reg_size = resource_size(res);
|
|
|
|
|
|
|
|
/* Honor the old binding, with pull registers as 2nd resource */
|
|
|
|
if (ctrl->type == RK3188 && info->reg_size < 0x200) {
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(base))
|
|
|
|
return PTR_ERR(base);
|
|
|
|
|
|
|
|
rockchip_regmap_config.max_register =
|
|
|
|
resource_size(res) - 4;
|
|
|
|
rockchip_regmap_config.name = "rockchip,pinctrl-pull";
|
|
|
|
info->regmap_pull = devm_regmap_init_mmio(&pdev->dev,
|
|
|
|
base,
|
|
|
|
&rockchip_regmap_config);
|
|
|
|
}
|
2013-10-16 07:08:42 +08:00
|
|
|
}
|
|
|
|
|
2014-05-05 19:59:09 +08:00
|
|
|
/* try to find the optional reference to the pmu syscon */
|
|
|
|
node = of_parse_phandle(np, "rockchip,pmu", 0);
|
|
|
|
if (node) {
|
|
|
|
info->regmap_pmu = syscon_node_to_regmap(node);
|
|
|
|
if (IS_ERR(info->regmap_pmu))
|
|
|
|
return PTR_ERR(info->regmap_pmu);
|
|
|
|
}
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
ret = rockchip_gpiolib_register(pdev, info);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = rockchip_pinctrl_register(pdev, info);
|
|
|
|
if (ret) {
|
|
|
|
rockchip_gpiolib_unregister(pdev, info);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, info);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
static struct rockchip_pin_bank rv1108_pin_banks[] = {
|
2016-11-15 18:02:43 +08:00
|
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
|
|
|
|
};
|
|
|
|
|
2017-03-18 01:18:36 +08:00
|
|
|
static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
|
|
|
|
.pin_banks = rv1108_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rv1108_pin_banks),
|
|
|
|
.label = "RV1108-GPIO",
|
|
|
|
.type = RV1108,
|
2016-11-15 18:02:43 +08:00
|
|
|
.grf_mux_offset = 0x10,
|
|
|
|
.pmu_mux_offset = 0x0,
|
2017-08-23 16:00:07 +08:00
|
|
|
.iomux_recalced = rv1108_mux_recalced_data,
|
|
|
|
.niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data),
|
2017-03-18 01:18:36 +08:00
|
|
|
.pull_calc_reg = rv1108_calc_pull_reg_and_bit,
|
|
|
|
.drv_calc_reg = rv1108_calc_drv_reg_and_bit,
|
2017-07-31 18:10:22 +08:00
|
|
|
.schmitt_calc_reg = rv1108_calc_schmitt_reg_and_bit,
|
2016-11-15 18:02:43 +08:00
|
|
|
};
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static struct rockchip_pin_bank rk2928_pin_banks[] = {
|
|
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk2928_pin_ctrl = {
|
|
|
|
.pin_banks = rk2928_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk2928_pin_banks),
|
|
|
|
.label = "RK2928-GPIO",
|
2013-10-16 07:07:20 +08:00
|
|
|
.type = RK2928,
|
2014-06-16 07:37:23 +08:00
|
|
|
.grf_mux_offset = 0xa8,
|
2013-10-16 07:07:20 +08:00
|
|
|
.pull_calc_reg = rk2928_calc_pull_reg_and_bit,
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
2015-08-28 13:46:47 +08:00
|
|
|
static struct rockchip_pin_bank rk3036_pin_banks[] = {
|
|
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3036_pin_ctrl = {
|
|
|
|
.pin_banks = rk3036_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3036_pin_banks),
|
|
|
|
.label = "RK3036-GPIO",
|
|
|
|
.type = RK2928,
|
|
|
|
.grf_mux_offset = 0xa8,
|
|
|
|
.pull_calc_reg = rk2928_calc_pull_reg_and_bit,
|
|
|
|
};
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static struct rockchip_pin_bank rk3066a_pin_banks[] = {
|
|
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
PIN_BANK(4, 32, "gpio4"),
|
|
|
|
PIN_BANK(6, 16, "gpio6"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3066a_pin_ctrl = {
|
|
|
|
.pin_banks = rk3066a_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3066a_pin_banks),
|
|
|
|
.label = "RK3066a-GPIO",
|
2013-10-16 07:07:20 +08:00
|
|
|
.type = RK2928,
|
2014-06-16 07:37:23 +08:00
|
|
|
.grf_mux_offset = 0xa8,
|
2013-10-16 07:07:20 +08:00
|
|
|
.pull_calc_reg = rk2928_calc_pull_reg_and_bit,
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_bank rk3066b_pin_banks[] = {
|
|
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3066b_pin_ctrl = {
|
|
|
|
.pin_banks = rk3066b_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3066b_pin_banks),
|
|
|
|
.label = "RK3066b-GPIO",
|
2013-10-16 07:07:20 +08:00
|
|
|
.type = RK3066B,
|
2014-06-16 07:37:23 +08:00
|
|
|
.grf_mux_offset = 0x60,
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
2017-07-21 14:27:15 +08:00
|
|
|
static struct rockchip_pin_bank rk3128_pin_banks[] = {
|
|
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3128_pin_ctrl = {
|
|
|
|
.pin_banks = rk3128_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3128_pin_banks),
|
|
|
|
.label = "RK3128-GPIO",
|
|
|
|
.type = RK3128,
|
|
|
|
.grf_mux_offset = 0xa8,
|
|
|
|
.iomux_recalced = rk3128_mux_recalced_data,
|
|
|
|
.niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data),
|
|
|
|
.iomux_routes = rk3128_mux_route_data,
|
|
|
|
.niomux_routes = ARRAY_SIZE(rk3128_mux_route_data),
|
|
|
|
.pull_calc_reg = rk3128_calc_pull_reg_and_bit,
|
|
|
|
};
|
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static struct rockchip_pin_bank rk3188_pin_banks[] = {
|
2014-06-16 07:36:05 +08:00
|
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0),
|
2013-06-11 04:16:22 +08:00
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
|
|
|
|
.pin_banks = rk3188_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3188_pin_banks),
|
|
|
|
.label = "RK3188-GPIO",
|
2013-10-16 07:07:20 +08:00
|
|
|
.type = RK3188,
|
2014-06-16 07:37:23 +08:00
|
|
|
.grf_mux_offset = 0x60,
|
2013-10-16 07:08:42 +08:00
|
|
|
.pull_calc_reg = rk3188_calc_pull_reg_and_bit,
|
2013-06-11 04:16:22 +08:00
|
|
|
};
|
|
|
|
|
2015-12-09 17:04:06 +08:00
|
|
|
static struct rockchip_pin_bank rk3228_pin_banks[] = {
|
|
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3228_pin_ctrl = {
|
|
|
|
.pin_banks = rk3228_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3228_pin_banks),
|
|
|
|
.label = "RK3228-GPIO",
|
|
|
|
.type = RK3288,
|
|
|
|
.grf_mux_offset = 0x0,
|
2017-05-26 15:20:21 +08:00
|
|
|
.iomux_routes = rk3228_mux_route_data,
|
|
|
|
.niomux_routes = ARRAY_SIZE(rk3228_mux_route_data),
|
2015-12-09 17:04:06 +08:00
|
|
|
.pull_calc_reg = rk3228_calc_pull_reg_and_bit,
|
|
|
|
.drv_calc_reg = rk3228_calc_drv_reg_and_bit,
|
|
|
|
};
|
|
|
|
|
2014-06-16 07:38:14 +08:00
|
|
|
static struct rockchip_pin_bank rk3288_pin_banks[] = {
|
|
|
|
PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_UNROUTED
|
|
|
|
),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_UNROUTED,
|
|
|
|
IOMUX_UNROUTED,
|
|
|
|
IOMUX_UNROUTED,
|
|
|
|
0
|
|
|
|
),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, IOMUX_UNROUTED),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, IOMUX_WIDTH_4BIT),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT,
|
|
|
|
IOMUX_WIDTH_4BIT,
|
|
|
|
0,
|
|
|
|
0
|
|
|
|
),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", IOMUX_UNROUTED,
|
|
|
|
0,
|
|
|
|
0,
|
|
|
|
IOMUX_UNROUTED
|
|
|
|
),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, IOMUX_UNROUTED),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0,
|
|
|
|
0,
|
|
|
|
IOMUX_WIDTH_4BIT,
|
|
|
|
IOMUX_UNROUTED
|
|
|
|
),
|
|
|
|
PIN_BANK(8, 16, "gpio8"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3288_pin_ctrl = {
|
|
|
|
.pin_banks = rk3288_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3288_pin_banks),
|
|
|
|
.label = "RK3288-GPIO",
|
2014-07-20 07:49:17 +08:00
|
|
|
.type = RK3288,
|
2014-06-16 07:38:14 +08:00
|
|
|
.grf_mux_offset = 0x0,
|
|
|
|
.pmu_mux_offset = 0x84,
|
|
|
|
.pull_calc_reg = rk3288_calc_pull_reg_and_bit,
|
2015-06-13 05:50:11 +08:00
|
|
|
.drv_calc_reg = rk3288_calc_drv_reg_and_bit,
|
2014-06-16 07:38:14 +08:00
|
|
|
};
|
|
|
|
|
2017-02-10 18:23:49 +08:00
|
|
|
static struct rockchip_pin_bank rk3328_pin_banks[] = {
|
|
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0,
|
2017-07-21 14:27:14 +08:00
|
|
|
IOMUX_WIDTH_3BIT,
|
|
|
|
IOMUX_WIDTH_3BIT,
|
2017-02-10 18:23:49 +08:00
|
|
|
0),
|
|
|
|
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3",
|
|
|
|
IOMUX_WIDTH_3BIT,
|
2017-07-21 14:27:14 +08:00
|
|
|
IOMUX_WIDTH_3BIT,
|
2017-02-10 18:23:49 +08:00
|
|
|
0,
|
|
|
|
0),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3328_pin_ctrl = {
|
|
|
|
.pin_banks = rk3328_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3328_pin_banks),
|
|
|
|
.label = "RK3328-GPIO",
|
|
|
|
.type = RK3288,
|
|
|
|
.grf_mux_offset = 0x0,
|
2017-07-21 14:27:14 +08:00
|
|
|
.iomux_recalced = rk3328_mux_recalced_data,
|
|
|
|
.niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data),
|
2017-05-26 15:20:22 +08:00
|
|
|
.iomux_routes = rk3328_mux_route_data,
|
|
|
|
.niomux_routes = ARRAY_SIZE(rk3328_mux_route_data),
|
2017-02-10 18:23:49 +08:00
|
|
|
.pull_calc_reg = rk3228_calc_pull_reg_and_bit,
|
|
|
|
.drv_calc_reg = rk3228_calc_drv_reg_and_bit,
|
2017-03-02 15:11:24 +08:00
|
|
|
.schmitt_calc_reg = rk3328_calc_schmitt_reg_and_bit,
|
2017-02-10 18:23:49 +08:00
|
|
|
};
|
|
|
|
|
2015-06-13 05:51:01 +08:00
|
|
|
static struct rockchip_pin_bank rk3368_pin_banks[] = {
|
|
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU
|
|
|
|
),
|
|
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3368_pin_ctrl = {
|
|
|
|
.pin_banks = rk3368_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3368_pin_banks),
|
|
|
|
.label = "RK3368-GPIO",
|
|
|
|
.type = RK3368,
|
|
|
|
.grf_mux_offset = 0x0,
|
|
|
|
.pmu_mux_offset = 0x0,
|
|
|
|
.pull_calc_reg = rk3368_calc_pull_reg_and_bit,
|
|
|
|
.drv_calc_reg = rk3368_calc_drv_reg_and_bit,
|
|
|
|
};
|
|
|
|
|
2016-02-01 10:58:21 +08:00
|
|
|
static struct rockchip_pin_bank rk3399_pin_banks[] = {
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0",
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
DRV_TYPE_IO_1V8_ONLY,
|
|
|
|
DRV_TYPE_IO_1V8_ONLY,
|
|
|
|
DRV_TYPE_IO_DEFAULT,
|
|
|
|
DRV_TYPE_IO_DEFAULT,
|
2017-09-30 20:13:20 +08:00
|
|
|
0x80,
|
|
|
|
0x88,
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
-1,
|
|
|
|
-1,
|
|
|
|
PULL_TYPE_IO_1V8_ONLY,
|
|
|
|
PULL_TYPE_IO_1V8_ONLY,
|
|
|
|
PULL_TYPE_IO_DEFAULT,
|
|
|
|
PULL_TYPE_IO_DEFAULT
|
|
|
|
),
|
2016-02-01 10:58:21 +08:00
|
|
|
PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
IOMUX_SOURCE_PMU,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
2017-09-30 20:13:20 +08:00
|
|
|
0xa0,
|
|
|
|
0xa8,
|
|
|
|
0xb0,
|
|
|
|
0xb8
|
2016-02-01 10:58:21 +08:00
|
|
|
),
|
pinctrl: rockchip: fix pull setting error for rk3399
This patch fixes the pinctrl pull bias setting, since the pull up/down
setting is the contrary for gpio0(just the gpio0a and gpio0b) and
gpio2(just the gpio2c and gpio2d).
From the TRM said, the gpio0a pull polarity setting:
gpio0a_p
GPIO0A PE/PS programmation section, every
GPIO bit corresponding to 2bits[PS:PE]
2'b00: Z(Normal operation);
2'b11: weak 1(pull-up);
2'b01: weak 0(pull-down);
2'b10: Z(Normal operation);
Then, the other gpios setting as the following:
gpio1a_p (e.g.: gpio1, gpio2a, gpio2b, gpio3...)
GPIO1A PU/PD programmation section, every
GPIO bit corresponding to 2bits
2'b00: Z(Normal operation);
2'b01: weak 1(pull-up);
2'b10: weak 0(pull-down);
2'b11: Z(Normal operation);
For example,(rk3399evb board)
sdmmc_cd --->gpio0_a7
localhost / # io -r -4 0xff320040
ff320040: 00004d5f
In general,the value should be 0x0000cd5f since the pin has been set
in the dts.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-11 11:39:28 +08:00
|
|
|
PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_ONLY,
|
|
|
|
DRV_TYPE_IO_1V8_ONLY,
|
|
|
|
PULL_TYPE_IO_DEFAULT,
|
|
|
|
PULL_TYPE_IO_DEFAULT,
|
|
|
|
PULL_TYPE_IO_1V8_ONLY,
|
|
|
|
PULL_TYPE_IO_1V8_ONLY
|
|
|
|
),
|
2016-02-01 10:58:21 +08:00
|
|
|
PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY,
|
|
|
|
DRV_TYPE_IO_3V3_ONLY,
|
|
|
|
DRV_TYPE_IO_3V3_ONLY,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0
|
|
|
|
),
|
|
|
|
PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_3V0_AUTO,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0,
|
|
|
|
DRV_TYPE_IO_1V8_OR_3V0
|
|
|
|
),
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
|
|
|
|
.pin_banks = rk3399_pin_banks,
|
|
|
|
.nr_banks = ARRAY_SIZE(rk3399_pin_banks),
|
|
|
|
.label = "RK3399-GPIO",
|
|
|
|
.type = RK3399,
|
|
|
|
.grf_mux_offset = 0xe000,
|
|
|
|
.pmu_mux_offset = 0x0,
|
|
|
|
.grf_drv_offset = 0xe100,
|
|
|
|
.pmu_drv_offset = 0x80,
|
2017-05-26 15:20:23 +08:00
|
|
|
.iomux_routes = rk3399_mux_route_data,
|
|
|
|
.niomux_routes = ARRAY_SIZE(rk3399_mux_route_data),
|
2016-02-01 10:58:21 +08:00
|
|
|
.pull_calc_reg = rk3399_calc_pull_reg_and_bit,
|
|
|
|
.drv_calc_reg = rk3399_calc_drv_reg_and_bit,
|
|
|
|
};
|
2015-06-13 05:51:01 +08:00
|
|
|
|
2013-06-11 04:16:22 +08:00
|
|
|
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
|
2017-03-18 01:18:36 +08:00
|
|
|
{ .compatible = "rockchip,rv1108-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rv1108_pin_ctrl },
|
2013-06-11 04:16:22 +08:00
|
|
|
{ .compatible = "rockchip,rk2928-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk2928_pin_ctrl },
|
2015-08-28 13:46:47 +08:00
|
|
|
{ .compatible = "rockchip,rk3036-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3036_pin_ctrl },
|
2013-06-11 04:16:22 +08:00
|
|
|
{ .compatible = "rockchip,rk3066a-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3066a_pin_ctrl },
|
2013-06-11 04:16:22 +08:00
|
|
|
{ .compatible = "rockchip,rk3066b-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3066b_pin_ctrl },
|
2017-07-21 14:27:15 +08:00
|
|
|
{ .compatible = "rockchip,rk3128-pinctrl",
|
|
|
|
.data = (void *)&rk3128_pin_ctrl },
|
2013-06-11 04:16:22 +08:00
|
|
|
{ .compatible = "rockchip,rk3188-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3188_pin_ctrl },
|
2015-12-09 17:04:06 +08:00
|
|
|
{ .compatible = "rockchip,rk3228-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3228_pin_ctrl },
|
2014-06-16 07:38:14 +08:00
|
|
|
{ .compatible = "rockchip,rk3288-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3288_pin_ctrl },
|
2017-02-10 18:23:49 +08:00
|
|
|
{ .compatible = "rockchip,rk3328-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3328_pin_ctrl },
|
2015-06-13 05:51:01 +08:00
|
|
|
{ .compatible = "rockchip,rk3368-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3368_pin_ctrl },
|
2016-02-01 10:58:21 +08:00
|
|
|
{ .compatible = "rockchip,rk3399-pinctrl",
|
2017-04-28 20:50:35 +08:00
|
|
|
.data = &rk3399_pin_ctrl },
|
2013-06-11 04:16:22 +08:00
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_driver rockchip_pinctrl_driver = {
|
|
|
|
.probe = rockchip_pinctrl_probe,
|
|
|
|
.driver = {
|
|
|
|
.name = "rockchip-pinctrl",
|
2014-10-29 19:51:59 +08:00
|
|
|
.pm = &rockchip_pinctrl_dev_pm_ops,
|
2013-08-23 14:27:53 +08:00
|
|
|
.of_match_table = rockchip_pinctrl_dt_match,
|
2013-06-11 04:16:22 +08:00
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init rockchip_pinctrl_drv_register(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&rockchip_pinctrl_driver);
|
|
|
|
}
|
|
|
|
postcore_initcall(rockchip_pinctrl_drv_register);
|