linux/kernel/sched/isolation.c

242 lines
6.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Housekeeping management. Manage the targets for routine code that can run on
* any CPU: unbound workqueues, timers, kthreads and any offloadable work.
*
* Copyright (C) 2017 Red Hat, Inc., Frederic Weisbecker
* Copyright (C) 2017-2018 SUSE, Frederic Weisbecker
*
*/
enum hk_flags {
HK_FLAG_TIMER = BIT(HK_TYPE_TIMER),
HK_FLAG_RCU = BIT(HK_TYPE_RCU),
HK_FLAG_MISC = BIT(HK_TYPE_MISC),
HK_FLAG_SCHED = BIT(HK_TYPE_SCHED),
HK_FLAG_TICK = BIT(HK_TYPE_TICK),
HK_FLAG_DOMAIN = BIT(HK_TYPE_DOMAIN),
HK_FLAG_WQ = BIT(HK_TYPE_WQ),
HK_FLAG_MANAGED_IRQ = BIT(HK_TYPE_MANAGED_IRQ),
HK_FLAG_KTHREAD = BIT(HK_TYPE_KTHREAD),
};
DEFINE_STATIC_KEY_FALSE(housekeeping_overridden);
EXPORT_SYMBOL_GPL(housekeeping_overridden);
struct housekeeping {
cpumask_var_t cpumasks[HK_TYPE_MAX];
unsigned long flags;
};
static struct housekeeping housekeeping;
bool housekeeping_enabled(enum hk_type type)
KVM: LAPIC: Inject timer interrupt via posted interrupt Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-06 09:26:51 +08:00
{
return !!(housekeeping.flags & BIT(type));
KVM: LAPIC: Inject timer interrupt via posted interrupt Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-06 09:26:51 +08:00
}
EXPORT_SYMBOL_GPL(housekeeping_enabled);
int housekeeping_any_cpu(enum hk_type type)
{
int cpu;
if (static_branch_unlikely(&housekeeping_overridden)) {
if (housekeeping.flags & BIT(type)) {
cpu = sched_numa_find_closest(housekeeping.cpumasks[type], smp_processor_id());
if (cpu < nr_cpu_ids)
return cpu;
return cpumask_any_and(housekeeping.cpumasks[type], cpu_online_mask);
}
}
return smp_processor_id();
}
EXPORT_SYMBOL_GPL(housekeeping_any_cpu);
const struct cpumask *housekeeping_cpumask(enum hk_type type)
{
if (static_branch_unlikely(&housekeeping_overridden))
if (housekeeping.flags & BIT(type))
return housekeeping.cpumasks[type];
return cpu_possible_mask;
}
EXPORT_SYMBOL_GPL(housekeeping_cpumask);
void housekeeping_affine(struct task_struct *t, enum hk_type type)
{
if (static_branch_unlikely(&housekeeping_overridden))
if (housekeeping.flags & BIT(type))
set_cpus_allowed_ptr(t, housekeeping.cpumasks[type]);
}
EXPORT_SYMBOL_GPL(housekeeping_affine);
bool housekeeping_test_cpu(int cpu, enum hk_type type)
{
if (static_branch_unlikely(&housekeeping_overridden))
if (housekeeping.flags & BIT(type))
return cpumask_test_cpu(cpu, housekeeping.cpumasks[type]);
return true;
}
EXPORT_SYMBOL_GPL(housekeeping_test_cpu);
void __init housekeeping_init(void)
{
enum hk_type type;
if (!housekeeping.flags)
return;
static_branch_enable(&housekeeping_overridden);
if (housekeeping.flags & HK_FLAG_TICK)
2018-02-21 12:17:27 +08:00
sched_tick_offload_init();
for_each_set_bit(type, &housekeeping.flags, HK_TYPE_MAX) {
/* We need at least one CPU to handle housekeeping work */
WARN_ON_ONCE(cpumask_empty(housekeeping.cpumasks[type]));
}
}
static void __init housekeeping_setup_type(enum hk_type type,
cpumask_var_t housekeeping_staging)
{
alloc_bootmem_cpumask_var(&housekeeping.cpumasks[type]);
cpumask_copy(housekeeping.cpumasks[type],
housekeeping_staging);
}
static int __init housekeeping_setup(char *str, unsigned long flags)
{
cpumask_var_t non_housekeeping_mask, housekeeping_staging;
int err = 0;
if ((flags & HK_FLAG_TICK) && !(housekeeping.flags & HK_FLAG_TICK)) {
if (!IS_ENABLED(CONFIG_NO_HZ_FULL)) {
pr_warn("Housekeeping: nohz unsupported."
" Build with CONFIG_NO_HZ_FULL\n");
return 0;
}
}
alloc_bootmem_cpumask_var(&non_housekeeping_mask);
sched/isolation: Reconcile rcu_nocbs= and nohz_full= We have a mismatch between RCU and isolation -- in relation to what is considered the maximum valid CPU number. This matters because nohz_full= and rcu_nocbs= are joined at the hip; in fact the former will enforce the latter. So we don't want a CPU mask to be valid for one and denied for the other. The difference 1st appeared as of v4.15; further details are below. As it is confusing to anyone who isn't looking at the code regularly, a reminder is in order; three values exist here: CONFIG_NR_CPUS - compiled in maximum cap on number of CPUs supported. nr_cpu_ids - possible # of CPUs (typically reflects what ACPI says) cpus_present - actual number of present/detected/installed CPUs. For this example, I'll refer to NR_CPUS=64 from "make defconfig" and nr_cpu_ids=6 for ACPI reporting on a board that could run a six core, and present=4 for a quad that is physically in the socket. From dmesg: smpboot: Allowing 6 CPUs, 2 hotplug CPUs setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1 rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. smp: Brought up 1 node, 4 CPUs And from userspace, see: paul@trash:/sys/devices/system/cpu$ cat present 0-3 paul@trash:/sys/devices/system/cpu$ cat possible 0-5 paul@trash:/sys/devices/system/cpu$ cat kernel_max 63 Everything is fine if we boot 5x5 for rcu/nohz: Command line: BOOT_IMAGE=/boot/bzImage nohz_full=2-5 rcu_nocbs=2-5 root=/dev/sda1 ro NO_HZ: Full dynticks CPUs: 2-5. rcu: Offload RCU callbacks from CPUs: 2-5. ..even though there is no CPU 4 or 5. Both RCU and nohz_full are OK. Now we push that > 6 but less than NR_CPU and with 15x15 we get: Command line: BOOT_IMAGE=/boot/bzImage rcu_nocbs=2-15 nohz_full=2-15 root=/dev/sda1 ro rcu: Note: kernel parameter 'rcu_nocbs=', 'nohz_full', or 'isolcpus=' contains nonexistent CPUs. rcu: Offload RCU callbacks from CPUs: 2-5. These are both functionally equivalent, as we are only changing flags on phantom CPUs that don't exist, but note the kernel interpretation changes. And worse, it only changes for one of the two - which is the problem. RCU doesn't care if you want to restrict the flags on phantom CPUs but clearly nohz_full does after this change from v4.15. edb9382175c3: ("sched/isolation: Move isolcpus= handling to the housekeeping code") - if (cpulist_parse(str, non_housekeeping_mask) < 0) { - pr_warn("Housekeeping: Incorrect nohz_full cpumask\n"); + err = cpulist_parse(str, non_housekeeping_mask); + if (err < 0 || cpumask_last(non_housekeeping_mask) >= nr_cpu_ids) { + pr_warn("Housekeeping: nohz_full= or isolcpus= incorrect CPU range\n"); To be clear, the sanity check on "possible" (nr_cpu_ids) is new here. The goal was reasonable ; not wanting housekeeping to land on a not-possible CPU, but note two things: 1) this is an exclusion list, not an inclusion list; we are tracking non_housekeeping CPUs; not ones who are explicitly assigned housekeeping 2) we went one further in 9219565aa890 ("sched/isolation: Require a present CPU in housekeeping mask") - ensuring that housekeeping was sanity checking against present and not just possible CPUs. To be clear, this means the check added in v4.15 is doubly redundant. And more importantly, overly strict/restrictive. We care now, because the bitmap boot arg parsing now knows that a value of "N" is NR_CPUS; the size of the bitmap, but the bitmap code doesn't know anything about the subtleties of our max/possible/present CPU specifics as outlined above. So drop the check added in v4.15 (edb9382175c3) and make RCU and nohz_full both in alignment again on NR_CPUS so "N" works for both, and then they can fall back to nr_cpu_ids internally just as before. Command line: BOOT_IMAGE=/boot/bzImage nohz_full=2-N rcu_nocbs=2-N root=/dev/sda1 ro NO_HZ: Full dynticks CPUs: 2-5. rcu: Offload RCU callbacks from CPUs: 2-5. As shown above, with this change, RCU and nohz_full are in sync, even with the use of the "N" placeholder. Same result is achieved with "15". Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20210419042659.1134916-1-paul.gortmaker@windriver.com
2021-04-19 12:26:59 +08:00
if (cpulist_parse(str, non_housekeeping_mask) < 0) {
pr_warn("Housekeeping: nohz_full= or isolcpus= incorrect CPU range\n");
goto free_non_housekeeping_mask;
}
alloc_bootmem_cpumask_var(&housekeeping_staging);
cpumask_andnot(housekeeping_staging,
cpu_possible_mask, non_housekeeping_mask);
if (!cpumask_intersects(cpu_present_mask, housekeeping_staging)) {
__cpumask_set_cpu(smp_processor_id(), housekeeping_staging);
__cpumask_clear_cpu(smp_processor_id(), non_housekeeping_mask);
if (!housekeeping.flags) {
pr_warn("Housekeeping: must include one present CPU, "
"using boot CPU:%d\n", smp_processor_id());
}
}
if (!housekeeping.flags) {
/* First setup call ("nohz_full=" or "isolcpus=") */
enum hk_type type;
for_each_set_bit(type, &flags, HK_TYPE_MAX)
housekeeping_setup_type(type, housekeeping_staging);
} else {
/* Second setup call ("nohz_full=" after "isolcpus=" or the reverse) */
enum hk_type type;
unsigned long iter_flags = flags & housekeeping.flags;
for_each_set_bit(type, &iter_flags, HK_TYPE_MAX) {
if (!cpumask_equal(housekeeping_staging,
housekeeping.cpumasks[type])) {
pr_warn("Housekeeping: nohz_full= must match isolcpus=\n");
goto free_housekeeping_staging;
}
}
iter_flags = flags & ~housekeeping.flags;
for_each_set_bit(type, &iter_flags, HK_TYPE_MAX)
housekeeping_setup_type(type, housekeeping_staging);
}
if ((flags & HK_FLAG_TICK) && !(housekeeping.flags & HK_FLAG_TICK))
tick_nohz_full_setup(non_housekeeping_mask);
housekeeping.flags |= flags;
err = 1;
free_housekeeping_staging:
free_bootmem_cpumask_var(housekeeping_staging);
free_non_housekeeping_mask:
free_bootmem_cpumask_var(non_housekeeping_mask);
return err;
}
static int __init housekeeping_nohz_full_setup(char *str)
{
unsigned long flags;
flags = HK_FLAG_TICK | HK_FLAG_WQ | HK_FLAG_TIMER | HK_FLAG_RCU |
HK_FLAG_MISC | HK_FLAG_KTHREAD;
return housekeeping_setup(str, flags);
}
__setup("nohz_full=", housekeeping_nohz_full_setup);
static int __init housekeeping_isolcpus_setup(char *str)
{
unsigned long flags = 0;
bool illegal = false;
char *par;
int len;
while (isalpha(*str)) {
if (!strncmp(str, "nohz,", 5)) {
str += 5;
flags |= HK_FLAG_TICK;
continue;
}
if (!strncmp(str, "domain,", 7)) {
str += 7;
flags |= HK_FLAG_DOMAIN;
continue;
}
genirq, sched/isolation: Isolate from handling managed interrupts The affinity of managed interrupts is completely handled in the kernel and cannot be changed via the /proc/irq/* interfaces from user space. As the kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent vector exhaustion, it can happen that a managed interrupt whose affinity mask contains both isolated and housekeeping CPUs is routed to an isolated CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts on the isolated CPU. Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding logic in the interrupt affinity selection code. The subparameter indicates to the interrupt affinity selection logic that it should try to avoid the above scenario. This isolation is best effort and only effective if the automatically assigned interrupt mask of a device queue contains isolated and housekeeping CPUs. If housekeeping CPUs are online then such interrupts are directed to the housekeeping CPU so that IO submitted on the housekeeping CPU cannot disturb the isolated CPU. If a queue's affinity mask contains only isolated CPUs then this parameter has no effect on the interrupt routing decision, though interrupts are only happening when tasks running on those isolated CPUs submit IO. IO submitted on housekeeping CPUs has no influence on those queues. If the affinity mask contains both housekeeping and isolated CPUs, but none of the contained housekeeping CPUs is online, then the interrupt is also routed to an isolated CPU. Interrupts are only delivered when one of the isolated CPUs in the affinity mask submits IO. If one of the contained housekeeping CPUs comes online, the CPU hotplug logic migrates the interrupt automatically back to the upcoming housekeeping CPU. Depending on the type of interrupt controller, this can require that at least one interrupt is delivered to the isolated CPU in order to complete the migration. [ tglx: Removed unused parameter, added and edited comments/documentation and rephrased the changelog so it contains more details. ] Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com
2020-01-20 17:16:25 +08:00
if (!strncmp(str, "managed_irq,", 12)) {
str += 12;
flags |= HK_FLAG_MANAGED_IRQ;
continue;
}
/*
* Skip unknown sub-parameter and validate that it is not
* containing an invalid character.
*/
for (par = str, len = 0; *str && *str != ','; str++, len++) {
if (!isalpha(*str) && *str != '_')
illegal = true;
}
if (illegal) {
pr_warn("isolcpus: Invalid flag %.*s\n", len, par);
return 0;
}
pr_info("isolcpus: Skipped unknown flag %.*s\n", len, par);
str++;
}
/* Default behaviour for isolcpus without flags */
if (!flags)
flags |= HK_FLAG_DOMAIN;
return housekeeping_setup(str, flags);
}
__setup("isolcpus=", housekeeping_isolcpus_setup);