0
0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-28 05:24:47 +08:00
linux/drivers/gpu/drm/i915/intel_ddi.c

919 lines
24 KiB
C
Raw Normal View History

/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eugeni Dodonov <eugeni.dodonov@intel.com>
*
*/
#include "i915_drv.h"
#include "intel_drv.h"
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
* them for both DP and FDI transports, allowing those ports to
* automatically adapt to HDMI connections as well
*/
static const u32 hsw_ddi_translations_dp[] = {
0x00FFFFFF, 0x0006000E, /* DP parameters */
0x00D75FFF, 0x0005000A,
0x00C30FFF, 0x00040006,
0x80AAAFFF, 0x000B0000,
0x00FFFFFF, 0x0005000A,
0x00D75FFF, 0x000C0004,
0x80C30FFF, 0x000B0000,
0x00FFFFFF, 0x00040006,
0x80D75FFF, 0x000B0000,
0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
static const u32 hsw_ddi_translations_fdi[] = {
0x00FFFFFF, 0x0007000E, /* FDI parameters */
0x00D75FFF, 0x000F000A,
0x00C30FFF, 0x00060006,
0x00AAAFFF, 0x001E0000,
0x00FFFFFF, 0x000F000A,
0x00D75FFF, 0x00160004,
0x00C30FFF, 0x001E0000,
0x00FFFFFF, 0x00060006,
0x00D75FFF, 0x001E0000,
0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
{
int type = intel_encoder->type;
if (type == INTEL_OUTPUT_HDMI) {
struct intel_hdmi *intel_hdmi =
enc_to_intel_hdmi(&intel_encoder->base);
return intel_hdmi->ddi_port;
} else if (type == INTEL_OUTPUT_ANALOG) {
return PORT_E;
} else {
DRM_ERROR("Invalid DDI encoder type %d\n", type);
BUG();
}
}
/* On Haswell, DDI port buffers must be programmed with correct values
* in advance. The buffer values are different for FDI and DP modes,
* but the HDMI/DVI fields are shared among those. So we program the DDI
* in either FDI or DP modes only, as HDMI connections will work with both
* of those
*/
void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port, bool use_fdi_mode)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
int i;
const u32 *ddi_translations = ((use_fdi_mode) ?
hsw_ddi_translations_fdi :
hsw_ddi_translations_dp);
DRM_DEBUG_DRIVER("Initializing DDI buffers for port %c in %s mode\n",
port_name(port),
use_fdi_mode ? "FDI" : "DP");
WARN((use_fdi_mode && (port != PORT_E)),
"Programming port %c in FDI mode, this probably will not work.\n",
port_name(port));
for (i=0, reg=DDI_BUF_TRANS(port); i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) {
I915_WRITE(reg, ddi_translations[i]);
reg += 4;
}
}
/* Program DDI buffers translations for DP. By default, program ports A-D in DP
* mode and port E for FDI.
*/
void intel_prepare_ddi(struct drm_device *dev)
{
int port;
if (IS_HASWELL(dev)) {
for (port = PORT_A; port < PORT_E; port++)
intel_prepare_ddi_buffers(dev, port, false);
/* DDI E is the suggested one to work in FDI mode, so program is as such by
* default. It will have to be re-programmed in case a digital DP output
* will be detected on it
*/
intel_prepare_ddi_buffers(dev, PORT_E, true);
}
}
static const long hsw_ddi_buf_ctl_values[] = {
DDI_BUF_EMP_400MV_0DB_HSW,
DDI_BUF_EMP_400MV_3_5DB_HSW,
DDI_BUF_EMP_400MV_6DB_HSW,
DDI_BUF_EMP_400MV_9_5DB_HSW,
DDI_BUF_EMP_600MV_0DB_HSW,
DDI_BUF_EMP_600MV_3_5DB_HSW,
DDI_BUF_EMP_600MV_6DB_HSW,
DDI_BUF_EMP_800MV_0DB_HSW,
DDI_BUF_EMP_800MV_3_5DB_HSW
};
/* Starting with Haswell, different DDI ports can work in FDI mode for
* connection to the PCH-located connectors. For this, it is necessary to train
* both the DDI port and PCH receiver for the desired DDI buffer settings.
*
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
* please note that when FDI mode is active on DDI E, it shares 2 lines with
* DDI A (which is used for eDP)
*/
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
u32 reg, temp, i;
/* Configure CPU PLL, wait for warmup */
I915_WRITE(SPLL_CTL,
SPLL_PLL_ENABLE |
SPLL_PLL_FREQ_1350MHz |
SPLL_PLL_SCC);
/* Use SPLL to drive the output when in FDI mode */
I915_WRITE(PORT_CLK_SEL(PORT_E),
PORT_CLK_SEL_SPLL);
udelay(20);
/* Start the training iterating through available voltages and emphasis */
for (i=0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp = (temp & ~DDI_BUF_EMP_MASK);
I915_WRITE(DDI_BUF_CTL(PORT_E),
temp |
DDI_BUF_CTL_ENABLE |
DDI_PORT_WIDTH_X2 |
hsw_ddi_buf_ctl_values[i]);
udelay(600);
/* We need to program FDI_RX_MISC with the default TP1 to TP2
* values before enabling the receiver, and configure the delay
* for the FDI timing generator to 90h. Luckily, all the other
* bits are supposed to be zeroed, so we can write those values
* directly.
*/
I915_WRITE(FDI_RX_MISC(pipe), FDI_RX_TP1_TO_TP2_48 |
FDI_RX_FDI_DELAY_90);
/* Enable CPU FDI Receiver with auto-training */
reg = FDI_RX_CTL(pipe);
I915_WRITE(reg,
I915_READ(reg) |
FDI_LINK_TRAIN_AUTO |
FDI_RX_ENABLE |
FDI_LINK_TRAIN_PATTERN_1_CPT |
FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_PORT_WIDTH_2X_LPT |
FDI_RX_PLL_ENABLE);
POSTING_READ(reg);
udelay(100);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n", i);
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
/* Disable DP_TP_CTL and FDI_RX_CTL) and retry */
I915_WRITE(DP_TP_CTL(PORT_E),
I915_READ(DP_TP_CTL(PORT_E)) &
~DP_TP_CTL_ENABLE);
I915_WRITE(FDI_RX_CTL(pipe),
I915_READ(FDI_RX_CTL(pipe)) &
~FDI_RX_PLL_ENABLE);
continue;
}
}
DRM_DEBUG_KMS("FDI train done.\n");
}
/* For DDI connections, it is possible to support different outputs over the
* same DDI port, such as HDMI or DP or even VGA via FDI. So we don't know by
* the time the output is detected what exactly is on the other end of it. This
* function aims at providing support for this detection and proper output
* configuration.
*/
void intel_ddi_init(struct drm_device *dev, enum port port)
{
/* For now, we don't do any proper output detection and assume that we
* handle HDMI only */
switch(port){
case PORT_A:
/* We don't handle eDP and DP yet */
DRM_DEBUG_DRIVER("Found digital output on DDI port A\n");
break;
/* Assume that the ports B, C and D are working in HDMI mode for now */
case PORT_B:
case PORT_C:
case PORT_D:
intel_hdmi_init(dev, DDI_BUF_CTL(port), port);
break;
default:
DRM_DEBUG_DRIVER("No handlers defined for port %d, skipping DDI initialization\n",
port);
break;
}
}
/* WRPLL clock dividers */
struct wrpll_tmds_clock {
u32 clock;
u16 p; /* Post divider */
u16 n2; /* Feedback divider */
u16 r2; /* Reference divider */
};
/* Table of matching values for WRPLL clocks programming for each frequency.
* The code assumes this table is sorted. */
static const struct wrpll_tmds_clock wrpll_tmds_clock_table[] = {
{19750, 38, 25, 18},
{20000, 48, 32, 18},
{21000, 36, 21, 15},
{21912, 42, 29, 17},
{22000, 36, 22, 15},
{23000, 36, 23, 15},
{23500, 40, 40, 23},
{23750, 26, 16, 14},
{24000, 36, 24, 15},
{25000, 36, 25, 15},
{25175, 26, 40, 33},
{25200, 30, 21, 15},
{26000, 36, 26, 15},
{27000, 30, 21, 14},
{27027, 18, 100, 111},
{27500, 30, 29, 19},
{28000, 34, 30, 17},
{28320, 26, 30, 22},
{28322, 32, 42, 25},
{28750, 24, 23, 18},
{29000, 30, 29, 18},
{29750, 32, 30, 17},
{30000, 30, 25, 15},
{30750, 30, 41, 24},
{31000, 30, 31, 18},
{31500, 30, 28, 16},
{32000, 30, 32, 18},
{32500, 28, 32, 19},
{33000, 24, 22, 15},
{34000, 28, 30, 17},
{35000, 26, 32, 19},
{35500, 24, 30, 19},
{36000, 26, 26, 15},
{36750, 26, 46, 26},
{37000, 24, 23, 14},
{37762, 22, 40, 26},
{37800, 20, 21, 15},
{38000, 24, 27, 16},
{38250, 24, 34, 20},
{39000, 24, 26, 15},
{40000, 24, 32, 18},
{40500, 20, 21, 14},
{40541, 22, 147, 89},
{40750, 18, 19, 14},
{41000, 16, 17, 14},
{41500, 22, 44, 26},
{41540, 22, 44, 26},
{42000, 18, 21, 15},
{42500, 22, 45, 26},
{43000, 20, 43, 27},
{43163, 20, 24, 15},
{44000, 18, 22, 15},
{44900, 20, 108, 65},
{45000, 20, 25, 15},
{45250, 20, 52, 31},
{46000, 18, 23, 15},
{46750, 20, 45, 26},
{47000, 20, 40, 23},
{48000, 18, 24, 15},
{49000, 18, 49, 30},
{49500, 16, 22, 15},
{50000, 18, 25, 15},
{50500, 18, 32, 19},
{51000, 18, 34, 20},
{52000, 18, 26, 15},
{52406, 14, 34, 25},
{53000, 16, 22, 14},
{54000, 16, 24, 15},
{54054, 16, 173, 108},
{54500, 14, 24, 17},
{55000, 12, 22, 18},
{56000, 14, 45, 31},
{56250, 16, 25, 15},
{56750, 14, 25, 17},
{57000, 16, 27, 16},
{58000, 16, 43, 25},
{58250, 16, 38, 22},
{58750, 16, 40, 23},
{59000, 14, 26, 17},
{59341, 14, 40, 26},
{59400, 16, 44, 25},
{60000, 16, 32, 18},
{60500, 12, 39, 29},
{61000, 14, 49, 31},
{62000, 14, 37, 23},
{62250, 14, 42, 26},
{63000, 12, 21, 15},
{63500, 14, 28, 17},
{64000, 12, 27, 19},
{65000, 14, 32, 19},
{65250, 12, 29, 20},
{65500, 12, 32, 22},
{66000, 12, 22, 15},
{66667, 14, 38, 22},
{66750, 10, 21, 17},
{67000, 14, 33, 19},
{67750, 14, 58, 33},
{68000, 14, 30, 17},
{68179, 14, 46, 26},
{68250, 14, 46, 26},
{69000, 12, 23, 15},
{70000, 12, 28, 18},
{71000, 12, 30, 19},
{72000, 12, 24, 15},
{73000, 10, 23, 17},
{74000, 12, 23, 14},
{74176, 8, 100, 91},
{74250, 10, 22, 16},
{74481, 12, 43, 26},
{74500, 10, 29, 21},
{75000, 12, 25, 15},
{75250, 10, 39, 28},
{76000, 12, 27, 16},
{77000, 12, 53, 31},
{78000, 12, 26, 15},
{78750, 12, 28, 16},
{79000, 10, 38, 26},
{79500, 10, 28, 19},
{80000, 12, 32, 18},
{81000, 10, 21, 14},
{81081, 6, 100, 111},
{81624, 8, 29, 24},
{82000, 8, 17, 14},
{83000, 10, 40, 26},
{83950, 10, 28, 18},
{84000, 10, 28, 18},
{84750, 6, 16, 17},
{85000, 6, 17, 18},
{85250, 10, 30, 19},
{85750, 10, 27, 17},
{86000, 10, 43, 27},
{87000, 10, 29, 18},
{88000, 10, 44, 27},
{88500, 10, 41, 25},
{89000, 10, 28, 17},
{89012, 6, 90, 91},
{89100, 10, 33, 20},
{90000, 10, 25, 15},
{91000, 10, 32, 19},
{92000, 10, 46, 27},
{93000, 10, 31, 18},
{94000, 10, 40, 23},
{94500, 10, 28, 16},
{95000, 10, 44, 25},
{95654, 10, 39, 22},
{95750, 10, 39, 22},
{96000, 10, 32, 18},
{97000, 8, 23, 16},
{97750, 8, 42, 29},
{98000, 8, 45, 31},
{99000, 8, 22, 15},
{99750, 8, 34, 23},
{100000, 6, 20, 18},
{100500, 6, 19, 17},
{101000, 6, 37, 33},
{101250, 8, 21, 14},
{102000, 6, 17, 15},
{102250, 6, 25, 22},
{103000, 8, 29, 19},
{104000, 8, 37, 24},
{105000, 8, 28, 18},
{106000, 8, 22, 14},
{107000, 8, 46, 29},
{107214, 8, 27, 17},
{108000, 8, 24, 15},
{108108, 8, 173, 108},
{109000, 6, 23, 19},
{110000, 6, 22, 18},
{110013, 6, 22, 18},
{110250, 8, 49, 30},
{110500, 8, 36, 22},
{111000, 8, 23, 14},
{111264, 8, 150, 91},
{111375, 8, 33, 20},
{112000, 8, 63, 38},
{112500, 8, 25, 15},
{113100, 8, 57, 34},
{113309, 8, 42, 25},
{114000, 8, 27, 16},
{115000, 6, 23, 18},
{116000, 8, 43, 25},
{117000, 8, 26, 15},
{117500, 8, 40, 23},
{118000, 6, 38, 29},
{119000, 8, 30, 17},
{119500, 8, 46, 26},
{119651, 8, 39, 22},
{120000, 8, 32, 18},
{121000, 6, 39, 29},
{121250, 6, 31, 23},
{121750, 6, 23, 17},
{122000, 6, 42, 31},
{122614, 6, 30, 22},
{123000, 6, 41, 30},
{123379, 6, 37, 27},
{124000, 6, 51, 37},
{125000, 6, 25, 18},
{125250, 4, 13, 14},
{125750, 4, 27, 29},
{126000, 6, 21, 15},
{127000, 6, 24, 17},
{127250, 6, 41, 29},
{128000, 6, 27, 19},
{129000, 6, 43, 30},
{129859, 4, 25, 26},
{130000, 6, 26, 18},
{130250, 6, 42, 29},
{131000, 6, 32, 22},
{131500, 6, 38, 26},
{131850, 6, 41, 28},
{132000, 6, 22, 15},
{132750, 6, 28, 19},
{133000, 6, 34, 23},
{133330, 6, 37, 25},
{134000, 6, 61, 41},
{135000, 6, 21, 14},
{135250, 6, 167, 111},
{136000, 6, 62, 41},
{137000, 6, 35, 23},
{138000, 6, 23, 15},
{138500, 6, 40, 26},
{138750, 6, 37, 24},
{139000, 6, 34, 22},
{139050, 6, 34, 22},
{139054, 6, 34, 22},
{140000, 6, 28, 18},
{141000, 6, 36, 23},
{141500, 6, 22, 14},
{142000, 6, 30, 19},
{143000, 6, 27, 17},
{143472, 4, 17, 16},
{144000, 6, 24, 15},
{145000, 6, 29, 18},
{146000, 6, 47, 29},
{146250, 6, 26, 16},
{147000, 6, 49, 30},
{147891, 6, 23, 14},
{148000, 6, 23, 14},
{148250, 6, 28, 17},
{148352, 4, 100, 91},
{148500, 6, 33, 20},
{149000, 6, 48, 29},
{150000, 6, 25, 15},
{151000, 4, 19, 17},
{152000, 6, 27, 16},
{152280, 6, 44, 26},
{153000, 6, 34, 20},
{154000, 6, 53, 31},
{155000, 6, 31, 18},
{155250, 6, 50, 29},
{155750, 6, 45, 26},
{156000, 6, 26, 15},
{157000, 6, 61, 35},
{157500, 6, 28, 16},
{158000, 6, 65, 37},
{158250, 6, 44, 25},
{159000, 6, 53, 30},
{159500, 6, 39, 22},
{160000, 6, 32, 18},
{161000, 4, 31, 26},
{162000, 4, 18, 15},
{162162, 4, 131, 109},
{162500, 4, 53, 44},
{163000, 4, 29, 24},
{164000, 4, 17, 14},
{165000, 4, 22, 18},
{166000, 4, 32, 26},
{167000, 4, 26, 21},
{168000, 4, 46, 37},
{169000, 4, 104, 83},
{169128, 4, 64, 51},
{169500, 4, 39, 31},
{170000, 4, 34, 27},
{171000, 4, 19, 15},
{172000, 4, 51, 40},
{172750, 4, 32, 25},
{172800, 4, 32, 25},
{173000, 4, 41, 32},
{174000, 4, 49, 38},
{174787, 4, 22, 17},
{175000, 4, 35, 27},
{176000, 4, 30, 23},
{177000, 4, 38, 29},
{178000, 4, 29, 22},
{178500, 4, 37, 28},
{179000, 4, 53, 40},
{179500, 4, 73, 55},
{180000, 4, 20, 15},
{181000, 4, 55, 41},
{182000, 4, 31, 23},
{183000, 4, 42, 31},
{184000, 4, 30, 22},
{184750, 4, 26, 19},
{185000, 4, 37, 27},
{186000, 4, 51, 37},
{187000, 4, 36, 26},
{188000, 4, 32, 23},
{189000, 4, 21, 15},
{190000, 4, 38, 27},
{190960, 4, 41, 29},
{191000, 4, 41, 29},
{192000, 4, 27, 19},
{192250, 4, 37, 26},
{193000, 4, 20, 14},
{193250, 4, 53, 37},
{194000, 4, 23, 16},
{194208, 4, 23, 16},
{195000, 4, 26, 18},
{196000, 4, 45, 31},
{197000, 4, 35, 24},
{197750, 4, 41, 28},
{198000, 4, 22, 15},
{198500, 4, 25, 17},
{199000, 4, 28, 19},
{200000, 4, 37, 25},
{201000, 4, 61, 41},
{202000, 4, 112, 75},
{202500, 4, 21, 14},
{203000, 4, 146, 97},
{204000, 4, 62, 41},
{204750, 4, 44, 29},
{205000, 4, 38, 25},
{206000, 4, 29, 19},
{207000, 4, 23, 15},
{207500, 4, 40, 26},
{208000, 4, 37, 24},
{208900, 4, 48, 31},
{209000, 4, 48, 31},
{209250, 4, 31, 20},
{210000, 4, 28, 18},
{211000, 4, 25, 16},
{212000, 4, 22, 14},
{213000, 4, 30, 19},
{213750, 4, 38, 24},
{214000, 4, 46, 29},
{214750, 4, 35, 22},
{215000, 4, 43, 27},
{216000, 4, 24, 15},
{217000, 4, 37, 23},
{218000, 4, 42, 26},
{218250, 4, 42, 26},
{218750, 4, 34, 21},
{219000, 4, 47, 29},
{220000, 4, 44, 27},
{220640, 4, 49, 30},
{220750, 4, 36, 22},
{221000, 4, 36, 22},
{222000, 4, 23, 14},
{222525, 4, 28, 17},
{222750, 4, 33, 20},
{227000, 4, 37, 22},
{230250, 4, 29, 17},
{233500, 4, 38, 22},
{235000, 4, 40, 23},
{238000, 4, 30, 17},
{241500, 2, 17, 19},
{245250, 2, 20, 22},
{247750, 2, 22, 24},
{253250, 2, 15, 16},
{256250, 2, 18, 19},
{262500, 2, 31, 32},
{267250, 2, 66, 67},
{268500, 2, 94, 95},
{270000, 2, 14, 14},
{272500, 2, 77, 76},
{273750, 2, 57, 56},
{280750, 2, 24, 23},
{281250, 2, 23, 22},
{286000, 2, 17, 16},
{291750, 2, 26, 24},
{296703, 2, 56, 51},
{297000, 2, 22, 20},
{298000, 2, 21, 19},
};
void intel_ddi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
int port = intel_hdmi->ddi_port;
int pipe = intel_crtc->pipe;
int p, n2, r2;
u32 i;
/* On Haswell, we need to enable the clocks and prepare DDI function to
* work in HDMI mode for this pipe.
*/
DRM_DEBUG_KMS("Preparing HDMI DDI mode for Haswell on port %c, pipe %c\n", port_name(port), pipe_name(pipe));
for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++)
if (crtc->mode.clock <= wrpll_tmds_clock_table[i].clock)
break;
if (i == ARRAY_SIZE(wrpll_tmds_clock_table))
i--;
p = wrpll_tmds_clock_table[i].p;
n2 = wrpll_tmds_clock_table[i].n2;
r2 = wrpll_tmds_clock_table[i].r2;
if (wrpll_tmds_clock_table[i].clock != crtc->mode.clock)
DRM_INFO("WR PLL: using settings for %dKHz on %dKHz mode\n",
wrpll_tmds_clock_table[i].clock, crtc->mode.clock);
DRM_DEBUG_KMS("WR PLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n",
crtc->mode.clock, p, n2, r2);
/* Configure WR PLL 1, program the correct divider values for
* the desired frequency and wait for warmup */
I915_WRITE(WRPLL_CTL1,
WRPLL_PLL_ENABLE |
WRPLL_PLL_SELECT_LCPLL_2700 |
WRPLL_DIVIDER_REFERENCE(r2) |
WRPLL_DIVIDER_FEEDBACK(n2) |
WRPLL_DIVIDER_POST(p));
udelay(20);
/* Use WRPLL1 clock to drive the output to the port, and tell the pipe to use
* this port for connection.
*/
I915_WRITE(PORT_CLK_SEL(port),
PORT_CLK_SEL_WRPLL1);
udelay(20);
if (intel_hdmi->has_audio) {
/* Proper support for digital audio needs a new logic and a new set
* of registers, so we leave it for future patch bombing.
*/
DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
pipe_name(intel_crtc->pipe));
/* write eld */
DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
intel_write_eld(encoder, adjusted_mode);
}
intel_hdmi->set_infoframes(encoder, adjusted_mode);
}
static struct intel_encoder *
intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder, *ret = NULL;
int num_encoders = 0;
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
ret = intel_encoder;
num_encoders++;
}
if (num_encoders != 1)
WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders,
intel_crtc->pipe);
BUG_ON(ret == NULL);
return ret;
}
void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
enum pipe pipe = intel_crtc->pipe;
uint32_t temp;
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in HDMI mode */
temp = PIPE_DDI_FUNC_ENABLE;
switch (intel_crtc->bpp) {
case 18:
temp |= PIPE_DDI_BPC_6;
break;
case 24:
temp |= PIPE_DDI_BPC_8;
break;
case 30:
temp |= PIPE_DDI_BPC_10;
break;
case 36:
temp |= PIPE_DDI_BPC_12;
break;
default:
WARN(1, "%d bpp unsupported by pipe DDI function\n",
intel_crtc->bpp);
}
if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
temp |= PIPE_DDI_PVSYNC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= PIPE_DDI_PHSYNC;
if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
struct intel_hdmi *intel_hdmi =
enc_to_intel_hdmi(&intel_encoder->base);
if (intel_hdmi->has_hdmi_sink)
temp |= PIPE_DDI_MODE_SELECT_HDMI;
else
temp |= PIPE_DDI_MODE_SELECT_DVI;
temp |= PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port);
} else if (intel_encoder->type == INTEL_OUTPUT_ANALOG) {
temp |= PIPE_DDI_MODE_SELECT_FDI;
temp |= PIPE_DDI_SELECT_PORT(PORT_E);
} else {
WARN(1, "Invalid encoder type %d for pipe %d\n",
intel_encoder->type, pipe);
}
I915_WRITE(DDI_FUNC_CTL(pipe), temp);
}
void intel_ddi_disable_pipe_func(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
uint32_t reg = DDI_FUNC_CTL(pipe);
uint32_t val = I915_READ(reg);
val &= ~(PIPE_DDI_FUNC_ENABLE | PIPE_DDI_PORT_MASK);
val |= PIPE_DDI_PORT_NONE;
I915_WRITE(reg, val);
}
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
u32 tmp;
int i;
tmp = I915_READ(DDI_BUF_CTL(intel_hdmi->ddi_port));
if (!(tmp & DDI_BUF_CTL_ENABLE))
return false;
for_each_pipe(i) {
tmp = I915_READ(DDI_FUNC_CTL(i));
if ((tmp & PIPE_DDI_PORT_MASK)
== PIPE_DDI_SELECT_PORT(intel_hdmi->ddi_port)) {
*pipe = i;
return true;
}
}
DRM_DEBUG_KMS("No pipe for ddi port %i found\n", intel_hdmi->ddi_port);
return true;
}
void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc)
{
struct drm_crtc *crtc = &intel_crtc->base;
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
enum port port = intel_ddi_get_encoder_port(intel_encoder);
I915_WRITE(PIPE_CLK_SEL(intel_crtc->pipe), PIPE_CLK_SEL_PORT(port));
}
void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc)
{
struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
I915_WRITE(PIPE_CLK_SEL(intel_crtc->pipe), PIPE_CLK_SEL_DISABLED);
}
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 14:59:56 +08:00
void intel_enable_ddi(struct intel_encoder *encoder)
{
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 14:59:56 +08:00
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 14:59:56 +08:00
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
int port = intel_hdmi->ddi_port;
u32 temp;
temp = I915_READ(DDI_BUF_CTL(port));
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 14:59:56 +08:00
temp |= DDI_BUF_CTL_ENABLE;
/* Enable DDI_BUF_CTL. In HDMI/DVI mode, the port width,
* and swing/emphasis values are ignored so nothing special needs
* to be done besides enabling the port.
*/
drm/i915/hdmi: convert to encoder->disable/enable I've picked hdmi as the first encoder to convert because it's rather simple: - no cloning possible - no differences between prepare/commit and dpms off/on switching. A few changes are required to do so: - Split up the dpms code into an enable/disable function and wire it up with the intel encoder. - Noop out the existing encoder prepare/commit functions used by the crtc helper - our crtc enable/disable code now calls back into the encoder enable/disable code at the right spot. - Create new helper functions to handle dpms changes. - Add intel_encoder->connectors_active to better track dpms state. Atm this is unused, but it will be useful to correctly disable the entire display pipe for cloned configurations. Also note that for now this is only useful in the dpms code - thanks to the crtc helper's dpms confusion across a modeset operation we can't (yet) rely on this having a sensible value in all circumstances. - Rip out the encoder helper dpms callback, if this is still getting called somewhere we have a bug. The slight issue with that is that the crtc helper abuses dpms off to disable unused functions. Hence we also need to implement a default encoder disable function to do just that with the new encoder->disable callback. - Note that we drop the cpt modeset verification in the commit callback, too. The right place to do this would be in the crtc's enable function, _after_ all the encoders are set up. But because not all encoders are converted yet, we can't do that. Hence disable this check temporarily as a minor concession to bisectability. v2: Squash the dpms mode to only the supported values - connector->dpms is for internal tracking only, we can hence avoid needless state-changes a bit whithout causing harm. v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-30 14:59:56 +08:00
I915_WRITE(DDI_BUF_CTL(port), temp);
}
void intel_disable_ddi(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
int port = intel_hdmi->ddi_port;
u32 temp;
temp = I915_READ(DDI_BUF_CTL(port));
temp &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), temp);
}
static int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
{
if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT)
return 450;
else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) ==
LCPLL_CLK_FREQ_450)
return 450;
else
return 540;
}
void intel_ddi_pll_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t val = I915_READ(LCPLL_CTL);
/* The LCPLL register should be turned on by the BIOS. For now let's
* just check its state and print errors in case something is wrong.
* Don't even try to turn it on.
*/
DRM_DEBUG_KMS("CDCLK running at %dMHz\n",
intel_ddi_get_cdclk_freq(dev_priv));
if (val & LCPLL_CD_SOURCE_FCLK)
DRM_ERROR("CDCLK source is not LCPLL\n");
if (val & LCPLL_PLL_DISABLE)
DRM_ERROR("LCPLL is disabled\n");
}