2009-06-14 20:52:37 +08:00
|
|
|
/* linux/drivers/mmc/host/sdhci-s3c.c
|
|
|
|
*
|
|
|
|
* Copyright 2008 Openmoko Inc.
|
|
|
|
* Copyright 2008 Simtec Electronics
|
|
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
|
|
* http://armlinux.simtec.co.uk/
|
|
|
|
*
|
|
|
|
* SDHCI (HSMMC) support for Samsung SoC
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/platform_device.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
|
|
|
#include <linux/slab.h>
|
2009-06-14 20:52:37 +08:00
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/io.h>
|
2010-08-11 09:01:58 +08:00
|
|
|
#include <linux/gpio.h>
|
2009-06-14 20:52:37 +08:00
|
|
|
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
|
|
|
|
#include <plat/sdhci.h>
|
|
|
|
#include <plat/regs-sdhci.h>
|
|
|
|
|
|
|
|
#include "sdhci.h"
|
|
|
|
|
|
|
|
#define MAX_BUS_CLK (4)
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct sdhci_s3c - S3C SDHCI instance
|
|
|
|
* @host: The SDHCI host created
|
|
|
|
* @pdev: The platform device we where created from.
|
|
|
|
* @ioarea: The resource created when we claimed the IO area.
|
|
|
|
* @pdata: The platform data for this controller.
|
|
|
|
* @cur_clk: The index of the current bus clock.
|
|
|
|
* @clk_io: The clock for the internal bus interface.
|
|
|
|
* @clk_bus: The clocks that are available for the SD/MMC bus clock.
|
|
|
|
*/
|
|
|
|
struct sdhci_s3c {
|
|
|
|
struct sdhci_host *host;
|
|
|
|
struct platform_device *pdev;
|
|
|
|
struct resource *ioarea;
|
|
|
|
struct s3c_sdhci_platdata *pdata;
|
|
|
|
unsigned int cur_clk;
|
2010-08-11 09:01:58 +08:00
|
|
|
int ext_cd_irq;
|
|
|
|
int ext_cd_gpio;
|
2009-06-14 20:52:37 +08:00
|
|
|
|
|
|
|
struct clk *clk_io;
|
|
|
|
struct clk *clk_bus[MAX_BUS_CLK];
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
|
|
|
|
{
|
|
|
|
return sdhci_priv(host);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* get_curclk - convert ctrl2 register to clock source number
|
|
|
|
* @ctrl2: Control2 register value.
|
|
|
|
*/
|
|
|
|
static u32 get_curclk(u32 ctrl2)
|
|
|
|
{
|
|
|
|
ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
|
|
|
|
ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
|
|
|
|
|
|
return ctrl2;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdhci_s3c_check_sclk(struct sdhci_host *host)
|
|
|
|
{
|
|
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
|
|
u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
|
|
|
|
|
|
if (get_curclk(tmp) != ourhost->cur_clk) {
|
|
|
|
dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
|
|
|
|
|
|
|
|
tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
|
|
|
|
tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
|
|
writel(tmp, host->ioaddr + 0x80);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
|
|
|
|
* @host: The SDHCI host instance.
|
|
|
|
*
|
|
|
|
* Callback to return the maximum clock rate acheivable by the controller.
|
|
|
|
*/
|
|
|
|
static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
|
|
|
|
{
|
|
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
|
|
struct clk *busclk;
|
|
|
|
unsigned int rate, max;
|
|
|
|
int clk;
|
|
|
|
|
|
|
|
/* note, a reset will reset the clock source */
|
|
|
|
|
|
|
|
sdhci_s3c_check_sclk(host);
|
|
|
|
|
|
|
|
for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
|
|
|
|
busclk = ourhost->clk_bus[clk];
|
|
|
|
if (!busclk)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
rate = clk_get_rate(busclk);
|
|
|
|
if (rate > max)
|
|
|
|
max = rate;
|
|
|
|
}
|
|
|
|
|
|
|
|
return max;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sdhci_s3c_consider_clock - consider one the bus clocks for current setting
|
|
|
|
* @ourhost: Our SDHCI instance.
|
|
|
|
* @src: The source clock index.
|
|
|
|
* @wanted: The clock frequency wanted.
|
|
|
|
*/
|
|
|
|
static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
|
|
|
|
unsigned int src,
|
|
|
|
unsigned int wanted)
|
|
|
|
{
|
|
|
|
unsigned long rate;
|
|
|
|
struct clk *clksrc = ourhost->clk_bus[src];
|
|
|
|
int div;
|
|
|
|
|
|
|
|
if (!clksrc)
|
|
|
|
return UINT_MAX;
|
|
|
|
|
|
|
|
rate = clk_get_rate(clksrc);
|
|
|
|
|
|
|
|
for (div = 1; div < 256; div *= 2) {
|
|
|
|
if ((rate / div) <= wanted)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
|
|
|
|
src, rate, wanted, rate / div);
|
|
|
|
|
|
|
|
return (wanted - (rate / div));
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sdhci_s3c_set_clock - callback on clock change
|
|
|
|
* @host: The SDHCI host being changed
|
|
|
|
* @clock: The clock rate being requested.
|
|
|
|
*
|
|
|
|
* When the card's clock is going to be changed, look at the new frequency
|
|
|
|
* and find the best clock source to go with it.
|
|
|
|
*/
|
|
|
|
static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
|
|
{
|
|
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
|
|
unsigned int best = UINT_MAX;
|
|
|
|
unsigned int delta;
|
|
|
|
int best_src = 0;
|
|
|
|
int src;
|
|
|
|
u32 ctrl;
|
|
|
|
|
|
|
|
/* don't bother if the clock is going off. */
|
|
|
|
if (clock == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
for (src = 0; src < MAX_BUS_CLK; src++) {
|
|
|
|
delta = sdhci_s3c_consider_clock(ourhost, src, clock);
|
|
|
|
if (delta < best) {
|
|
|
|
best = delta;
|
|
|
|
best_src = src;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(&ourhost->pdev->dev,
|
|
|
|
"selected source %d, clock %d, delta %d\n",
|
|
|
|
best_src, clock, best);
|
|
|
|
|
|
|
|
/* select the new clock source */
|
|
|
|
|
|
|
|
if (ourhost->cur_clk != best_src) {
|
|
|
|
struct clk *clk = ourhost->clk_bus[best_src];
|
|
|
|
|
|
|
|
/* turn clock off to card before changing clock source */
|
|
|
|
writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
|
|
|
|
|
|
|
|
ourhost->cur_clk = best_src;
|
|
|
|
host->max_clk = clk_get_rate(clk);
|
|
|
|
|
|
|
|
ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
|
|
ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
|
|
|
|
ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
|
|
|
|
writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* reconfigure the hardware for new clock rate */
|
|
|
|
|
|
|
|
{
|
|
|
|
struct mmc_ios ios;
|
|
|
|
|
|
|
|
ios.clock = clock;
|
|
|
|
|
|
|
|
if (ourhost->pdata->cfg_card)
|
|
|
|
(ourhost->pdata->cfg_card)(ourhost->pdev, host->ioaddr,
|
|
|
|
&ios, NULL);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2010-08-11 09:01:56 +08:00
|
|
|
/**
|
|
|
|
* sdhci_s3c_get_min_clock - callback to get minimal supported clock value
|
|
|
|
* @host: The SDHCI host being queried
|
|
|
|
*
|
|
|
|
* To init mmc host properly a minimal clock value is needed. For high system
|
|
|
|
* bus clock's values the standard formula gives values out of allowed range.
|
|
|
|
* The clock still can be set to lower values, if clock source other then
|
|
|
|
* system bus is selected.
|
|
|
|
*/
|
|
|
|
static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
|
|
|
|
{
|
|
|
|
struct sdhci_s3c *ourhost = to_s3c(host);
|
|
|
|
unsigned int delta, min = UINT_MAX;
|
|
|
|
int src;
|
|
|
|
|
|
|
|
for (src = 0; src < MAX_BUS_CLK; src++) {
|
|
|
|
delta = sdhci_s3c_consider_clock(ourhost, src, 0);
|
|
|
|
if (delta == UINT_MAX)
|
|
|
|
continue;
|
|
|
|
/* delta is a negative value in this case */
|
|
|
|
if (-delta < min)
|
|
|
|
min = -delta;
|
|
|
|
}
|
|
|
|
return min;
|
|
|
|
}
|
|
|
|
|
2009-06-14 20:52:37 +08:00
|
|
|
static struct sdhci_ops sdhci_s3c_ops = {
|
|
|
|
.get_max_clock = sdhci_s3c_get_max_clk,
|
|
|
|
.set_clock = sdhci_s3c_set_clock,
|
2010-08-11 09:01:56 +08:00
|
|
|
.get_min_clock = sdhci_s3c_get_min_clock,
|
2009-06-14 20:52:37 +08:00
|
|
|
};
|
|
|
|
|
2010-08-11 09:01:58 +08:00
|
|
|
static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
|
|
|
|
{
|
|
|
|
struct sdhci_host *host = platform_get_drvdata(dev);
|
2010-09-20 21:03:42 +08:00
|
|
|
unsigned long flags;
|
|
|
|
|
2010-08-11 09:01:58 +08:00
|
|
|
if (host) {
|
2010-09-20 21:03:42 +08:00
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
2010-08-11 09:01:58 +08:00
|
|
|
if (state) {
|
|
|
|
dev_dbg(&dev->dev, "card inserted.\n");
|
|
|
|
host->flags &= ~SDHCI_DEVICE_DEAD;
|
|
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
|
|
} else {
|
|
|
|
dev_dbg(&dev->dev, "card removed.\n");
|
|
|
|
host->flags |= SDHCI_DEVICE_DEAD;
|
|
|
|
host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
|
|
}
|
2010-08-20 05:13:37 +08:00
|
|
|
tasklet_schedule(&host->card_tasklet);
|
2010-09-20 21:03:42 +08:00
|
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
2010-08-11 09:01:58 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t sdhci_s3c_gpio_card_detect_thread(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct sdhci_s3c *sc = dev_id;
|
|
|
|
int status = gpio_get_value(sc->ext_cd_gpio);
|
|
|
|
if (sc->pdata->ext_cd_gpio_invert)
|
|
|
|
status = !status;
|
|
|
|
sdhci_s3c_notify_change(sc->pdev, status);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sdhci_s3c_setup_card_detect_gpio(struct sdhci_s3c *sc)
|
|
|
|
{
|
|
|
|
struct s3c_sdhci_platdata *pdata = sc->pdata;
|
|
|
|
struct device *dev = &sc->pdev->dev;
|
|
|
|
|
|
|
|
if (gpio_request(pdata->ext_cd_gpio, "SDHCI EXT CD") == 0) {
|
|
|
|
sc->ext_cd_gpio = pdata->ext_cd_gpio;
|
|
|
|
sc->ext_cd_irq = gpio_to_irq(pdata->ext_cd_gpio);
|
|
|
|
if (sc->ext_cd_irq &&
|
|
|
|
request_threaded_irq(sc->ext_cd_irq, NULL,
|
|
|
|
sdhci_s3c_gpio_card_detect_thread,
|
|
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
|
|
|
|
dev_name(dev), sc) == 0) {
|
|
|
|
int status = gpio_get_value(sc->ext_cd_gpio);
|
|
|
|
if (pdata->ext_cd_gpio_invert)
|
|
|
|
status = !status;
|
|
|
|
sdhci_s3c_notify_change(sc->pdev, status);
|
|
|
|
} else {
|
|
|
|
dev_warn(dev, "cannot request irq for card detect\n");
|
|
|
|
sc->ext_cd_irq = 0;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
dev_err(dev, "cannot request gpio for card detect\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2009-06-14 20:52:37 +08:00
|
|
|
static int __devinit sdhci_s3c_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct sdhci_host *host;
|
|
|
|
struct sdhci_s3c *sc;
|
|
|
|
struct resource *res;
|
|
|
|
int ret, irq, ptr, clks;
|
|
|
|
|
|
|
|
if (!pdata) {
|
|
|
|
dev_err(dev, "no device data specified\n");
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq < 0) {
|
|
|
|
dev_err(dev, "no irq specified\n");
|
|
|
|
return irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res) {
|
|
|
|
dev_err(dev, "no memory specified\n");
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
|
|
|
|
if (IS_ERR(host)) {
|
|
|
|
dev_err(dev, "sdhci_alloc_host() failed\n");
|
|
|
|
return PTR_ERR(host);
|
|
|
|
}
|
|
|
|
|
|
|
|
sc = sdhci_priv(host);
|
|
|
|
|
|
|
|
sc->host = host;
|
|
|
|
sc->pdev = pdev;
|
|
|
|
sc->pdata = pdata;
|
2010-08-11 09:01:58 +08:00
|
|
|
sc->ext_cd_gpio = -1; /* invalid gpio number */
|
2009-06-14 20:52:37 +08:00
|
|
|
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
|
|
|
|
sc->clk_io = clk_get(dev, "hsmmc");
|
|
|
|
if (IS_ERR(sc->clk_io)) {
|
|
|
|
dev_err(dev, "failed to get io clock\n");
|
|
|
|
ret = PTR_ERR(sc->clk_io);
|
|
|
|
goto err_io_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* enable the local io clock and keep it running for the moment. */
|
|
|
|
clk_enable(sc->clk_io);
|
|
|
|
|
|
|
|
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
|
|
|
|
struct clk *clk;
|
|
|
|
char *name = pdata->clocks[ptr];
|
|
|
|
|
|
|
|
if (name == NULL)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
clk = clk_get(dev, name);
|
|
|
|
if (IS_ERR(clk)) {
|
|
|
|
dev_err(dev, "failed to get clock %s\n", name);
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
clks++;
|
|
|
|
sc->clk_bus[ptr] = clk;
|
|
|
|
clk_enable(clk);
|
|
|
|
|
|
|
|
dev_info(dev, "clock source %d: %s (%ld Hz)\n",
|
|
|
|
ptr, name, clk_get_rate(clk));
|
|
|
|
}
|
|
|
|
|
|
|
|
if (clks == 0) {
|
|
|
|
dev_err(dev, "failed to find any bus clocks\n");
|
|
|
|
ret = -ENOENT;
|
|
|
|
goto err_no_busclks;
|
|
|
|
}
|
|
|
|
|
|
|
|
sc->ioarea = request_mem_region(res->start, resource_size(res),
|
|
|
|
mmc_hostname(host->mmc));
|
|
|
|
if (!sc->ioarea) {
|
|
|
|
dev_err(dev, "failed to reserve register area\n");
|
|
|
|
ret = -ENXIO;
|
|
|
|
goto err_req_regs;
|
|
|
|
}
|
|
|
|
|
|
|
|
host->ioaddr = ioremap_nocache(res->start, resource_size(res));
|
|
|
|
if (!host->ioaddr) {
|
|
|
|
dev_err(dev, "failed to map registers\n");
|
|
|
|
ret = -ENXIO;
|
|
|
|
goto err_req_regs;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Ensure we have minimal gpio selected CMD/CLK/Detect */
|
|
|
|
if (pdata->cfg_gpio)
|
|
|
|
pdata->cfg_gpio(pdev, pdata->max_width);
|
|
|
|
|
|
|
|
host->hw_name = "samsung-hsmmc";
|
|
|
|
host->ops = &sdhci_s3c_ops;
|
|
|
|
host->quirks = 0;
|
|
|
|
host->irq = irq;
|
|
|
|
|
|
|
|
/* Setup quirks for the controller */
|
2010-05-27 05:42:05 +08:00
|
|
|
host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
|
2010-08-11 09:01:57 +08:00
|
|
|
host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
|
2009-06-14 20:52:37 +08:00
|
|
|
|
|
|
|
#ifndef CONFIG_MMC_SDHCI_S3C_DMA
|
|
|
|
|
|
|
|
/* we currently see overruns on errors, so disable the SDMA
|
|
|
|
* support as well. */
|
|
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
|
|
|
|
|
|
|
|
#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
|
|
|
|
|
|
|
|
/* It seems we do not get an DATA transfer complete on non-busy
|
|
|
|
* transfers, not sure if this is a problem with this specific
|
|
|
|
* SDHCI block, or a missing configuration that needs to be set. */
|
|
|
|
host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
|
|
|
|
|
2010-08-11 09:01:58 +08:00
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
|
|
|
|
pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
|
|
|
|
host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
|
|
|
|
|
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
|
|
|
|
host->mmc->caps = MMC_CAP_NONREMOVABLE;
|
|
|
|
|
2009-06-14 20:52:37 +08:00
|
|
|
host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
|
|
|
|
SDHCI_QUIRK_32BIT_DMA_SIZE);
|
|
|
|
|
2010-08-11 09:01:55 +08:00
|
|
|
/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
|
|
|
|
host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
|
|
|
|
|
2009-06-14 20:52:37 +08:00
|
|
|
ret = sdhci_add_host(host);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "sdhci_add_host() failed\n");
|
|
|
|
goto err_add_host;
|
|
|
|
}
|
|
|
|
|
2010-08-11 09:01:58 +08:00
|
|
|
/* The following two methods of card detection might call
|
|
|
|
sdhci_s3c_notify_change() immediately, so they can be called
|
|
|
|
only after sdhci_add_host(). Setup errors are ignored. */
|
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_init)
|
|
|
|
pdata->ext_cd_init(&sdhci_s3c_notify_change);
|
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_GPIO &&
|
|
|
|
gpio_is_valid(pdata->ext_cd_gpio))
|
|
|
|
sdhci_s3c_setup_card_detect_gpio(sc);
|
|
|
|
|
2009-06-14 20:52:37 +08:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_add_host:
|
|
|
|
release_resource(sc->ioarea);
|
|
|
|
kfree(sc->ioarea);
|
|
|
|
|
|
|
|
err_req_regs:
|
|
|
|
for (ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
|
|
|
|
clk_disable(sc->clk_bus[ptr]);
|
|
|
|
clk_put(sc->clk_bus[ptr]);
|
|
|
|
}
|
|
|
|
|
|
|
|
err_no_busclks:
|
|
|
|
clk_disable(sc->clk_io);
|
|
|
|
clk_put(sc->clk_io);
|
|
|
|
|
|
|
|
err_io_clk:
|
|
|
|
sdhci_free_host(host);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
|
|
|
|
{
|
2010-08-11 09:01:58 +08:00
|
|
|
struct s3c_sdhci_platdata *pdata = pdev->dev.platform_data;
|
2010-07-21 04:24:33 +08:00
|
|
|
struct sdhci_host *host = platform_get_drvdata(pdev);
|
|
|
|
struct sdhci_s3c *sc = sdhci_priv(host);
|
|
|
|
int ptr;
|
|
|
|
|
2010-08-11 09:01:58 +08:00
|
|
|
if (pdata->cd_type == S3C_SDHCI_CD_EXTERNAL && pdata->ext_cd_cleanup)
|
|
|
|
pdata->ext_cd_cleanup(&sdhci_s3c_notify_change);
|
|
|
|
|
|
|
|
if (sc->ext_cd_irq)
|
|
|
|
free_irq(sc->ext_cd_irq, sc);
|
|
|
|
|
|
|
|
if (gpio_is_valid(sc->ext_cd_gpio))
|
|
|
|
gpio_free(sc->ext_cd_gpio);
|
|
|
|
|
2010-07-21 04:24:33 +08:00
|
|
|
sdhci_remove_host(host, 1);
|
|
|
|
|
|
|
|
for (ptr = 0; ptr < 3; ptr++) {
|
|
|
|
clk_disable(sc->clk_bus[ptr]);
|
|
|
|
clk_put(sc->clk_bus[ptr]);
|
|
|
|
}
|
|
|
|
clk_disable(sc->clk_io);
|
|
|
|
clk_put(sc->clk_io);
|
|
|
|
|
|
|
|
iounmap(host->ioaddr);
|
|
|
|
release_resource(sc->ioarea);
|
|
|
|
kfree(sc->ioarea);
|
|
|
|
|
|
|
|
sdhci_free_host(host);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
|
2009-06-14 20:52:37 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
|
|
|
|
static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm)
|
|
|
|
{
|
|
|
|
struct sdhci_host *host = platform_get_drvdata(dev);
|
|
|
|
|
|
|
|
sdhci_suspend_host(host, pm);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sdhci_s3c_resume(struct platform_device *dev)
|
|
|
|
{
|
|
|
|
struct sdhci_host *host = platform_get_drvdata(dev);
|
|
|
|
|
|
|
|
sdhci_resume_host(host);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
#define sdhci_s3c_suspend NULL
|
|
|
|
#define sdhci_s3c_resume NULL
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static struct platform_driver sdhci_s3c_driver = {
|
|
|
|
.probe = sdhci_s3c_probe,
|
|
|
|
.remove = __devexit_p(sdhci_s3c_remove),
|
|
|
|
.suspend = sdhci_s3c_suspend,
|
|
|
|
.resume = sdhci_s3c_resume,
|
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "s3c-sdhci",
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init sdhci_s3c_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&sdhci_s3c_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit sdhci_s3c_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&sdhci_s3c_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(sdhci_s3c_init);
|
|
|
|
module_exit(sdhci_s3c_exit);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
|
|
|
|
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_ALIAS("platform:s3c-sdhci");
|