korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-13 14:24:11 +08:00
Code Issues Packages Projects Releases Wiki Activity
linux-6.6.y
linux/security/selinux/ima.c

121 lines
2.7 KiB
C
Raw Permalink Normal View History

selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2021 Microsoft Corporation
*
* Author: Lakshmi Ramasubramanian (nramas@linux.microsoft.com)
*
selinux: adjust typos in comments Found by codespell(1) Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-04-20 23:04:59 +08:00
* Measure critical data structures maintained by SELinux
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
* using IMA subsystem.
*/
#include <linux/vmalloc.h>
#include <linux/ima.h>
#include "security.h"
#include "ima.h"
/*
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
* selinux_ima_collect_state - Read selinux configuration settings
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
*
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
* On success returns the configuration settings string.
* On error, returns NULL.
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
*/
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
static char *selinux_ima_collect_state(void)
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
{
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
const char *on = "=1;", *off = "=0;";
char *buf;
int buf_len, len, i, rc;
buf_len = strlen("initialized=0;enforcing=0;checkreqprot=0;") + 1;
len = strlen(on);
selinux: shorten the policy capability enum names The SELinux policy capability enum names are rather long and follow the "POLICYDB_CAPABILITY_XXX format". While the "POLICYDB_" prefix is helpful in tying the enums to other SELinux policy constants, macros, etc. there is no reason why we need to spell out "CAPABILITY" completely. Shorten "CAPABILITY" to "CAP" in order to make things a bit shorter and cleaner. Moving forward, the SELinux policy capability enum names should follow the "POLICYDB_CAP_XXX" format. Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-03-02 01:39:20 +08:00
for (i = 0; i < __POLICYDB_CAP_MAX; i++)
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
buf_len += strlen(selinux_policycap_names[i]) + len;
buf = kzalloc(buf_len, GFP_KERNEL);
if (!buf)
return NULL;
rc = strscpy(buf, "initialized", buf_len);
WARN_ON(rc < 0);
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
rc = strlcat(buf, selinux_initialized() ? on : off, buf_len);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
WARN_ON(rc >= buf_len);
rc = strlcat(buf, "enforcing", buf_len);
WARN_ON(rc >= buf_len);
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
rc = strlcat(buf, enforcing_enabled() ? on : off, buf_len);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
WARN_ON(rc >= buf_len);
rc = strlcat(buf, "checkreqprot", buf_len);
WARN_ON(rc >= buf_len);
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
rc = strlcat(buf, checkreqprot_get() ? on : off, buf_len);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
WARN_ON(rc >= buf_len);
selinux: shorten the policy capability enum names The SELinux policy capability enum names are rather long and follow the "POLICYDB_CAPABILITY_XXX format". While the "POLICYDB_" prefix is helpful in tying the enums to other SELinux policy constants, macros, etc. there is no reason why we need to spell out "CAPABILITY" completely. Shorten "CAPABILITY" to "CAP" in order to make things a bit shorter and cleaner. Moving forward, the SELinux policy capability enum names should follow the "POLICYDB_CAP_XXX" format. Signed-off-by: Paul Moore <paul@paul-moore.com>
2022-03-02 01:39:20 +08:00
for (i = 0; i < __POLICYDB_CAP_MAX; i++) {
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
rc = strlcat(buf, selinux_policycap_names[i], buf_len);
WARN_ON(rc >= buf_len);
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
rc = strlcat(buf, selinux_state.policycap[i] ? on : off,
buf_len);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
WARN_ON(rc >= buf_len);
}
return buf;
}
/*
* selinux_ima_measure_state_locked - Measure SELinux state and hash of policy
*/
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
void selinux_ima_measure_state_locked(void)
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
{
char *state_str = NULL;
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
void *policy = NULL;
size_t policy_len;
int rc = 0;
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
lockdep_assert_held(&selinux_state.policy_mutex);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
state_str = selinux_ima_collect_state();
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
if (!state_str) {
pr_err("SELinux: %s: failed to read state.\n", __func__);
return;
}
ima_measure_critical_data("selinux", "selinux-state",
ima: Add digest and digest_len params to the functions to measure a buffer This patch performs the final modification necessary to pass the buffer measurement to callers, so that they provide a functionality similar to ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to ima_measure_critical_data() and process_buffer_measurement(). These functions calculate the digest even if there is no suitable rule in the IMA policy and, in this case, they simply return 1 before generating a new measurement entry. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-23 16:53:04 +08:00
state_str, strlen(state_str), false,
NULL, 0);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
kfree(state_str);
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
/*
* Measure SELinux policy only after initialization is completed.
*/
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
if (!selinux_initialized())
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
return;
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
rc = security_read_state_kernel(&policy, &policy_len);
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
if (rc) {
pr_err("SELinux: %s: failed to read policy %d.\n", __func__, rc);
return;
}
ima_measure_critical_data("selinux", "selinux-policy-hash",
ima: Add digest and digest_len params to the functions to measure a buffer This patch performs the final modification necessary to pass the buffer measurement to callers, so that they provide a functionality similar to ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to ima_measure_critical_data() and process_buffer_measurement(). These functions calculate the digest even if there is no suitable rule in the IMA policy and, in this case, they simply return 1 before generating a new measurement entry. Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-07-23 16:53:04 +08:00
policy, policy_len, true,
NULL, 0);
selinux: include a consumer of the new IMA critical data hook SELinux stores the active policy in memory, so the changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring in-memory SELinux policy through IMA subsystem provides a secure way for the attestation service to remotely validate the policy contents at runtime. Measure the hash of the loaded policy by calling the IMA hook ima_measure_critical_data(). Since the size of the loaded policy can be large (several MB), measure the hash of the policy instead of the entire policy to avoid bloating the IMA log entry. To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of the hash of SELinux policy: To verify the measured data with the current SELinux policy run the following commands and verify the output hash values match. sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1 grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 Note that the actual verification of SELinux policy would require loading the expected policy into an identical kernel on a pristine/known-safe system and run the sha256sum /sys/kernel/selinux/policy there to get the expected hash. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-01-15 03:15:22 +08:00
vfree(policy);
}
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
/*
* selinux_ima_measure_state - Measure SELinux state and hash of policy
*/
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
void selinux_ima_measure_state(void)
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
{
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
lockdep_assert_not_held(&selinux_state.policy_mutex);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
selinux: stop passing selinux_state pointers and their offspring Linus observed that the pervasive passing of selinux_state pointers introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux state") adds overhead and complexity without providing any benefit. The original idea was to pave the way for SELinux namespaces but those have not yet been implemented and there isn't currently a concrete plan to do so. Remove the passing of the selinux_state pointers, reverting to direct use of the single global selinux_state, and likewise remove passing of child pointers like the selinux_avc. The selinux_policy pointer remains as it is needed for atomic switching of policies. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/ Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2023-03-10 02:30:37 +08:00
mutex_lock(&selinux_state.policy_mutex);
selinux_ima_measure_state_locked();
mutex_unlock(&selinux_state.policy_mutex);
selinux: measure state and policy capabilities SELinux stores the configuration state and the policy capabilities in kernel memory. Changes to this data at runtime would have an impact on the security guarantees provided by SELinux. Measuring this data through IMA subsystem provides a tamper-resistant way for an attestation service to remotely validate it at runtime. Measure the configuration state and policy capabilities by calling the IMA hook ima_measure_critical_data(). To enable SELinux data measurement, the following steps are required: 1, Add "ima_policy=critical_data" to the kernel command line arguments to enable measuring SELinux data at boot time. For example, BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data 2, Add the following rule to /etc/ima/ima-policy measure func=CRITICAL_DATA label=selinux Sample measurement of SELinux state and policy capabilities: 10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b Execute the following command to extract the measured data from the IMA's runtime measurements list: grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p The output should be a list of key-value pairs. For example, initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0; To verify the measurement is consistent with the current SELinux state reported on the system, compare the integer values in the following files with those set in the IMA measurement (using the following commands): - cat /sys/fs/selinux/enforce - cat /sys/fs/selinux/checkreqprot - cat /sys/fs/selinux/policy_capabilities/[capability_file] Note that the actual verification would be against an expected state and done on a separate system (likely an attestation server) requiring "initialized=1;enforcing=1;checkreqprot=0;" for a secure state and then whatever policy capabilities are actually set in the expected policy (which can be extracted from the policy itself via seinfo, for example). Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com> Suggested-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-02-13 00:37:09 +08:00
}
Reference in New Issue Copy Permalink