linux/include/drm/drm_writeback.h

181 lines
4.4 KiB
C
Raw Permalink Normal View History

drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* (C) COPYRIGHT 2016 ARM Limited. All rights reserved.
* Author: Brian Starkey <brian.starkey@arm.com>
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms
* of such GNU licence.
*/
#ifndef __DRM_WRITEBACK_H__
#define __DRM_WRITEBACK_H__
#include <drm/drm_connector.h>
#include <drm/drm_encoder.h>
#include <linux/workqueue.h>
/**
* struct drm_writeback_connector - DRM writeback connector
*/
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
struct drm_writeback_connector {
/**
* @base: base drm_connector object
*/
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
struct drm_connector base;
/**
* @encoder: Internal encoder used by the connector to fulfill
* the DRM framework requirements. The users of the
* @drm_writeback_connector control the behaviour of the @encoder
* by passing the @enc_funcs parameter to drm_writeback_connector_init()
* function.
* For users of drm_writeback_connector_init_with_encoder(), this field
* is not valid as the encoder is managed within their drivers.
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
*/
struct drm_encoder encoder;
/**
* @pixel_formats_blob_ptr:
*
* DRM blob property data for the pixel formats list on writeback
* connectors
* See also drm_writeback_connector_init()
*/
struct drm_property_blob *pixel_formats_blob_ptr;
/** @job_lock: Protects job_queue */
spinlock_t job_lock;
/**
* @job_queue:
*
* Holds a list of a connector's writeback jobs; the last item is the
* most recent. The first item may be either waiting for the hardware
* to begin writing, or currently being written.
*
* See also: drm_writeback_queue_job() and
* drm_writeback_signal_completion()
*/
struct list_head job_queue;
/**
* @fence_context:
*
* timeline context used for fence operations.
*/
unsigned int fence_context;
/**
* @fence_lock:
*
* spinlock to protect the fences in the fence_context.
*/
spinlock_t fence_lock;
/**
* @fence_seqno:
*
* Seqno variable used as monotonic counter for the fences
* created on the connector's timeline.
*/
unsigned long fence_seqno;
/**
* @timeline_name:
*
* The name of the connector's fence timeline.
*/
char timeline_name[32];
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
};
/**
* struct drm_writeback_job - DRM writeback job
*/
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
struct drm_writeback_job {
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 09:01:38 +08:00
/**
* @connector:
*
* Back-pointer to the writeback connector associated with the job
*/
struct drm_writeback_connector *connector;
/**
* @prepared:
*
* Set when the job has been prepared with drm_writeback_prepare_job()
*/
bool prepared;
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
/**
* @cleanup_work:
*
* Used to allow drm_writeback_signal_completion to defer dropping the
* framebuffer reference to a workqueue
*/
struct work_struct cleanup_work;
/**
* @list_entry:
*
* List item for the writeback connector's @job_queue
*/
struct list_head list_entry;
/**
* @fb:
*
* Framebuffer to be written to by the writeback connector. Do not set
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 09:01:38 +08:00
* directly, use drm_writeback_set_fb()
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
*/
struct drm_framebuffer *fb;
/**
* @out_fence:
*
* Fence which will signal once the writeback has completed
*/
struct dma_fence *out_fence;
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 09:01:38 +08:00
/**
* @priv:
*
* Driver-private data
*/
void *priv;
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
};
static inline struct drm_writeback_connector *
drm_connector_to_writeback(struct drm_connector *connector)
{
return container_of(connector, struct drm_writeback_connector, base);
}
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
int drm_writeback_connector_init(struct drm_device *dev,
struct drm_writeback_connector *wb_connector,
const struct drm_connector_funcs *con_funcs,
const struct drm_encoder_helper_funcs *enc_helper_funcs,
const u32 *formats, int n_formats,
u32 possible_crtcs);
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
int drm_writeback_connector_init_with_encoder(struct drm_device *dev,
struct drm_writeback_connector *wb_connector,
struct drm_encoder *enc,
const struct drm_connector_funcs *con_funcs, const u32 *formats,
int n_formats);
drm: writeback: Add job prepare and cleanup operations As writeback jobs contain a framebuffer, drivers may need to prepare and cleanup them the same way they can prepare and cleanup framebuffers for planes. Add two new optional connector helper operations, .prepare_writeback_job() and .cleanup_writeback_job() to support this. The job prepare operation is called from drm_atomic_helper_prepare_planes() to avoid a new atomic commit helper that would need to be called by all drivers not using drm_atomic_helper_commit(). The job cleanup operation is called from the existing drm_writeback_cleanup_job() function, invoked both when destroying the job as part of a aborted commit, or when the job completes. The drm_writeback_job structure is extended with a priv field to let drivers store per-job data, such as mappings related to the writeback framebuffer. For internal plumbing reasons the drm_writeback_job structure needs to store a back-pointer to the drm_writeback_connector. To avoid pushing too much writeback-specific knowledge to drm_atomic_uapi.c, create a drm_writeback_set_fb() function, move the writeback job setup code there, and set the connector backpointer. The prepare_signaling() function doesn't need to allocate writeback jobs and can ignore connectors without a job, as it is called after the writeback jobs are allocated to store framebuffers, and a writeback fence with a framebuffer is an invalid configuration that gets rejected by the commit check. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
2019-02-21 09:01:38 +08:00
int drm_writeback_set_fb(struct drm_connector_state *conn_state,
struct drm_framebuffer *fb);
int drm_writeback_prepare_job(struct drm_writeback_job *job);
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector,
struct drm_connector_state *conn_state);
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
void drm_writeback_cleanup_job(struct drm_writeback_job *job);
void
drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector,
int status);
struct dma_fence *
drm_writeback_get_out_fence(struct drm_writeback_connector *wb_connector);
drm: Add writeback connector type Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2017-03-30 00:42:32 +08:00
#endif